| /* |
| * wof.S: Sparc window overflow handler. |
| * |
| * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) |
| */ |
| |
| #include <asm/contregs.h> |
| #include <asm/page.h> |
| #include <asm/ptrace.h> |
| #include <asm/psr.h> |
| #include <asm/smp.h> |
| #include <asm/asi.h> |
| #include <asm/winmacro.h> |
| #include <asm/asmmacro.h> |
| #include <asm/thread_info.h> |
| |
| /* WARNING: This routine is hairy and _very_ complicated, but it |
| * must be as fast as possible as it handles the allocation |
| * of register windows to the user and kernel. If you touch |
| * this code be _very_ careful as many other pieces of the |
| * kernel depend upon how this code behaves. You have been |
| * duly warned... |
| */ |
| |
| /* We define macro's for registers which have a fixed |
| * meaning throughout this entire routine. The 'T' in |
| * the comments mean that the register can only be |
| * accessed when in the 'trap' window, 'G' means |
| * accessible in any window. Do not change these registers |
| * after they have been set, until you are ready to return |
| * from the trap. |
| */ |
| #define t_psr l0 /* %psr at trap time T */ |
| #define t_pc l1 /* PC for trap return T */ |
| #define t_npc l2 /* NPC for trap return T */ |
| #define t_wim l3 /* %wim at trap time T */ |
| #define saved_g5 l5 /* Global save register T */ |
| #define saved_g6 l6 /* Global save register T */ |
| #define curptr g6 /* Gets set to 'current' then stays G */ |
| |
| /* Now registers whose values can change within the handler. */ |
| #define twin_tmp l4 /* Temp reg, only usable in trap window T */ |
| #define glob_tmp g5 /* Global temporary reg, usable anywhere G */ |
| |
| .text |
| .align 4 |
| /* BEGINNING OF PATCH INSTRUCTIONS */ |
| /* On a 7-window Sparc the boot code patches spnwin_* |
| * instructions with the following ones. |
| */ |
| .globl spnwin_patch1_7win, spnwin_patch2_7win, spnwin_patch3_7win |
| spnwin_patch1_7win: sll %t_wim, 6, %glob_tmp |
| spnwin_patch2_7win: and %glob_tmp, 0x7f, %glob_tmp |
| spnwin_patch3_7win: and %twin_tmp, 0x7f, %twin_tmp |
| /* END OF PATCH INSTRUCTIONS */ |
| |
| /* The trap entry point has done the following: |
| * |
| * rd %psr, %l0 |
| * rd %wim, %l3 |
| * b spill_window_entry |
| * andcc %l0, PSR_PS, %g0 |
| */ |
| |
| /* Datum current_thread_info->uwinmask contains at all times a bitmask |
| * where if any user windows are active, at least one bit will |
| * be set in to mask. If no user windows are active, the bitmask |
| * will be all zeroes. |
| */ |
| .globl spill_window_entry |
| .globl spnwin_patch1, spnwin_patch2, spnwin_patch3 |
| spill_window_entry: |
| /* LOCATION: Trap Window */ |
| |
| mov %g5, %saved_g5 ! save away global temp register |
| mov %g6, %saved_g6 ! save away 'current' ptr register |
| |
| /* Compute what the new %wim will be if we save the |
| * window properly in this trap handler. |
| * |
| * newwim = ((%wim>>1) | (%wim<<(nwindows - 1))); |
| */ |
| srl %t_wim, 0x1, %twin_tmp |
| spnwin_patch1: sll %t_wim, 7, %glob_tmp |
| or %glob_tmp, %twin_tmp, %glob_tmp |
| spnwin_patch2: and %glob_tmp, 0xff, %glob_tmp |
| |
| /* The trap entry point has set the condition codes |
| * up for us to see if this is from user or kernel. |
| * Get the load of 'curptr' out of the way. |
| */ |
| LOAD_CURRENT(curptr, twin_tmp) |
| |
| andcc %t_psr, PSR_PS, %g0 |
| be,a spwin_fromuser ! all user wins, branch |
| save %g0, %g0, %g0 ! Go where saving will occur |
| |
| /* See if any user windows are active in the set. */ |
| ld [%curptr + TI_UWINMASK], %twin_tmp ! grab win mask |
| orcc %g0, %twin_tmp, %g0 ! check for set bits |
| bne spwin_exist_uwins ! yep, there are some |
| andn %twin_tmp, %glob_tmp, %twin_tmp ! compute new uwinmask |
| |
| /* Save into the window which must be saved and do it. |
| * Basically if we are here, this means that we trapped |
| * from kernel mode with only kernel windows in the register |
| * file. |
| */ |
| save %g0, %g0, %g0 ! save into the window to stash away |
| wr %glob_tmp, 0x0, %wim ! set new %wim, this is safe now |
| |
| spwin_no_userwins_from_kernel: |
| /* LOCATION: Window to be saved */ |
| |
| STORE_WINDOW(sp) ! stash the window |
| restore %g0, %g0, %g0 ! go back into trap window |
| |
| /* LOCATION: Trap window */ |
| mov %saved_g5, %g5 ! restore %glob_tmp |
| mov %saved_g6, %g6 ! restore %curptr |
| wr %t_psr, 0x0, %psr ! restore condition codes in %psr |
| WRITE_PAUSE ! waste some time |
| jmp %t_pc ! Return from trap |
| rett %t_npc ! we are done |
| |
| spwin_exist_uwins: |
| /* LOCATION: Trap window */ |
| |
| /* Wow, user windows have to be dealt with, this is dirty |
| * and messy as all hell. And difficult to follow if you |
| * are approaching the infamous register window trap handling |
| * problem for the first time. DON'T LOOK! |
| * |
| * Note that how the execution path works out, the new %wim |
| * will be left for us in the global temporary register, |
| * %glob_tmp. We cannot set the new %wim first because we |
| * need to save into the appropriate window without inducing |
| * a trap (traps are off, we'd get a watchdog wheee)... |
| * But first, store the new user window mask calculated |
| * above. |
| */ |
| st %twin_tmp, [%curptr + TI_UWINMASK] |
| save %g0, %g0, %g0 ! Go to where the saving will occur |
| |
| spwin_fromuser: |
| /* LOCATION: Window to be saved */ |
| wr %glob_tmp, 0x0, %wim ! Now it is safe to set new %wim |
| |
| /* LOCATION: Window to be saved */ |
| |
| /* This instruction branches to a routine which will check |
| * to validity of the users stack pointer by whatever means |
| * are necessary. This means that this is architecture |
| * specific and thus this branch instruction will need to |
| * be patched at boot time once the machine type is known. |
| * This routine _shall not_ touch %curptr under any |
| * circumstances whatsoever! It will branch back to the |
| * label 'spwin_good_ustack' if the stack is ok but still |
| * needs to be dumped (SRMMU for instance will not need to |
| * do this) or 'spwin_finish_up' if the stack is ok and the |
| * registers have already been saved. If the stack is found |
| * to be bogus for some reason the routine shall branch to |
| * the label 'spwin_user_stack_is_bolixed' which will take |
| * care of things at that point. |
| */ |
| b spwin_srmmu_stackchk |
| andcc %sp, 0x7, %g0 |
| |
| spwin_good_ustack: |
| /* LOCATION: Window to be saved */ |
| |
| /* The users stack is ok and we can safely save it at |
| * %sp. |
| */ |
| STORE_WINDOW(sp) |
| |
| spwin_finish_up: |
| restore %g0, %g0, %g0 /* Back to trap window. */ |
| |
| /* LOCATION: Trap window */ |
| |
| /* We have spilled successfully, and we have properly stored |
| * the appropriate window onto the stack. |
| */ |
| |
| /* Restore saved globals */ |
| mov %saved_g5, %g5 |
| mov %saved_g6, %g6 |
| |
| wr %t_psr, 0x0, %psr |
| WRITE_PAUSE |
| jmp %t_pc |
| rett %t_npc |
| |
| spwin_user_stack_is_bolixed: |
| /* LOCATION: Window to be saved */ |
| |
| /* Wheee, user has trashed his/her stack. We have to decide |
| * how to proceed based upon whether we came from kernel mode |
| * or not. If we came from kernel mode, toss the window into |
| * a special buffer and proceed, the kernel _needs_ a window |
| * and we could be in an interrupt handler so timing is crucial. |
| * If we came from user land we build a full stack frame and call |
| * c-code to gun down the process. |
| */ |
| rd %psr, %glob_tmp |
| andcc %glob_tmp, PSR_PS, %g0 |
| bne spwin_bad_ustack_from_kernel |
| nop |
| |
| /* Oh well, throw this one window into the per-task window |
| * buffer, the first one. |
| */ |
| st %sp, [%curptr + TI_RWIN_SPTRS] |
| STORE_WINDOW(curptr + TI_REG_WINDOW) |
| restore %g0, %g0, %g0 |
| |
| /* LOCATION: Trap Window */ |
| |
| /* Back in the trap window, update winbuffer save count. */ |
| mov 1, %twin_tmp |
| st %twin_tmp, [%curptr + TI_W_SAVED] |
| |
| /* Compute new user window mask. What we are basically |
| * doing is taking two windows, the invalid one at trap |
| * time and the one we attempted to throw onto the users |
| * stack, and saying that everything else is an ok user |
| * window. umask = ((~(%t_wim | %wim)) & valid_wim_bits) |
| */ |
| rd %wim, %twin_tmp |
| or %twin_tmp, %t_wim, %twin_tmp |
| not %twin_tmp |
| spnwin_patch3: and %twin_tmp, 0xff, %twin_tmp ! patched on 7win Sparcs |
| st %twin_tmp, [%curptr + TI_UWINMASK] |
| |
| #define STACK_OFFSET (THREAD_SIZE - TRACEREG_SZ - STACKFRAME_SZ) |
| |
| sethi %hi(STACK_OFFSET), %sp |
| or %sp, %lo(STACK_OFFSET), %sp |
| add %curptr, %sp, %sp |
| |
| /* Restore the saved globals and build a pt_regs frame. */ |
| mov %saved_g5, %g5 |
| mov %saved_g6, %g6 |
| STORE_PT_ALL(sp, t_psr, t_pc, t_npc, g1) |
| |
| sethi %hi(STACK_OFFSET), %g6 |
| or %g6, %lo(STACK_OFFSET), %g6 |
| sub %sp, %g6, %g6 ! curptr |
| |
| /* Turn on traps and call c-code to deal with it. */ |
| wr %t_psr, PSR_ET, %psr |
| nop |
| call window_overflow_fault |
| nop |
| |
| /* Return from trap if C-code actually fixes things, if it |
| * doesn't then we never get this far as the process will |
| * be given the look of death from Commander Peanut. |
| */ |
| b ret_trap_entry |
| clr %l6 |
| |
| spwin_bad_ustack_from_kernel: |
| /* LOCATION: Window to be saved */ |
| |
| /* The kernel provoked a spill window trap, but the window we |
| * need to save is a user one and the process has trashed its |
| * stack pointer. We need to be quick, so we throw it into |
| * a per-process window buffer until we can properly handle |
| * this later on. |
| */ |
| SAVE_BOLIXED_USER_STACK(curptr, glob_tmp) |
| restore %g0, %g0, %g0 |
| |
| /* LOCATION: Trap window */ |
| |
| /* Restore globals, condition codes in the %psr and |
| * return from trap. Note, restoring %g6 when returning |
| * to kernel mode is not necessarily these days. ;-) |
| */ |
| mov %saved_g5, %g5 |
| mov %saved_g6, %g6 |
| |
| wr %t_psr, 0x0, %psr |
| WRITE_PAUSE |
| |
| jmp %t_pc |
| rett %t_npc |
| |
| /* Undefine the register macros which would only cause trouble |
| * if used below. This helps find 'stupid' coding errors that |
| * produce 'odd' behavior. The routines below are allowed to |
| * make usage of glob_tmp and t_psr so we leave them defined. |
| */ |
| #undef twin_tmp |
| #undef curptr |
| #undef t_pc |
| #undef t_npc |
| #undef t_wim |
| #undef saved_g5 |
| #undef saved_g6 |
| |
| /* Now come the per-architecture window overflow stack checking routines. |
| * As noted above %curptr cannot be touched by this routine at all. |
| */ |
| |
| /* This is a generic SRMMU routine. As far as I know this |
| * works for all current v8/srmmu implementations, we'll |
| * see... |
| */ |
| .globl spwin_srmmu_stackchk |
| spwin_srmmu_stackchk: |
| /* LOCATION: Window to be saved on the stack */ |
| |
| /* Because of SMP concerns and speed we play a trick. |
| * We disable fault traps in the MMU control register, |
| * Execute the stores, then check the fault registers |
| * to see what happens. I can hear Linus now |
| * "disgusting... broken hardware...". |
| * |
| * But first, check to see if the users stack has ended |
| * up in kernel vma, then we would succeed for the 'wrong' |
| * reason... ;( Note that the 'sethi' below assumes the |
| * kernel is page aligned, which should always be the case. |
| */ |
| /* Check results of callers andcc %sp, 0x7, %g0 */ |
| bne spwin_user_stack_is_bolixed |
| sethi %hi(PAGE_OFFSET), %glob_tmp |
| cmp %glob_tmp, %sp |
| bleu spwin_user_stack_is_bolixed |
| mov AC_M_SFSR, %glob_tmp |
| |
| /* Clear the fault status and turn on the no_fault bit. */ |
| lda [%glob_tmp] ASI_M_MMUREGS, %g0 ! eat SFSR |
| |
| lda [%g0] ASI_M_MMUREGS, %glob_tmp ! read MMU control |
| or %glob_tmp, 0x2, %glob_tmp ! or in no_fault bit |
| sta %glob_tmp, [%g0] ASI_M_MMUREGS ! set it |
| |
| /* Dump the registers and cross fingers. */ |
| STORE_WINDOW(sp) |
| |
| /* Clear the no_fault bit and check the status. */ |
| andn %glob_tmp, 0x2, %glob_tmp |
| sta %glob_tmp, [%g0] ASI_M_MMUREGS |
| |
| mov AC_M_SFAR, %glob_tmp |
| lda [%glob_tmp] ASI_M_MMUREGS, %g0 |
| |
| mov AC_M_SFSR, %glob_tmp |
| lda [%glob_tmp] ASI_M_MMUREGS, %glob_tmp |
| andcc %glob_tmp, 0x2, %g0 ! did we fault? |
| be,a spwin_finish_up + 0x4 ! cool beans, success |
| restore %g0, %g0, %g0 |
| |
| rd %psr, %glob_tmp |
| b spwin_user_stack_is_bolixed + 0x4 ! we faulted, ugh |
| nop |