| /* |
| * Copyright (c) 2008 open80211s Ltd. |
| * Authors: Luis Carlos Cobo <luisca@cozybit.com> |
| * Javier Cardona <javier@cozybit.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <asm/unaligned.h> |
| #include "ieee80211_i.h" |
| #include "mesh.h" |
| |
| #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ) |
| #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ) |
| |
| #define PP_OFFSET 1 /* Path Selection Protocol */ |
| #define PM_OFFSET 5 /* Path Selection Metric */ |
| #define CC_OFFSET 9 /* Congestion Control Mode */ |
| #define CAPAB_OFFSET 17 |
| #define ACCEPT_PLINKS 0x80 |
| |
| int mesh_allocated; |
| static struct kmem_cache *rm_cache; |
| |
| void ieee80211s_init(void) |
| { |
| mesh_pathtbl_init(); |
| mesh_allocated = 1; |
| rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry), |
| 0, 0, NULL); |
| } |
| |
| void ieee80211s_stop(void) |
| { |
| mesh_pathtbl_unregister(); |
| kmem_cache_destroy(rm_cache); |
| } |
| |
| static void ieee80211_mesh_housekeeping_timer(unsigned long data) |
| { |
| struct ieee80211_sub_if_data *sdata = (void *) data; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; |
| |
| ifmsh->housekeeping = true; |
| queue_work(local->hw.workqueue, &ifmsh->work); |
| } |
| |
| /** |
| * mesh_matches_local - check if the config of a mesh point matches ours |
| * |
| * @ie: information elements of a management frame from the mesh peer |
| * @sdata: local mesh subif |
| * |
| * This function checks if the mesh configuration of a mesh point matches the |
| * local mesh configuration, i.e. if both nodes belong to the same mesh network. |
| */ |
| bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; |
| |
| /* |
| * As support for each feature is added, check for matching |
| * - On mesh config capabilities |
| * - Power Save Support En |
| * - Sync support enabled |
| * - Sync support active |
| * - Sync support required from peer |
| * - MDA enabled |
| * - Power management control on fc |
| */ |
| if (ifmsh->mesh_id_len == ie->mesh_id_len && |
| memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 && |
| memcmp(ifmsh->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 && |
| memcmp(ifmsh->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 && |
| memcmp(ifmsh->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0) |
| return true; |
| |
| return false; |
| } |
| |
| /** |
| * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links |
| * |
| * @ie: information elements of a management frame from the mesh peer |
| */ |
| bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie) |
| { |
| return (*(ie->mesh_config + CAPAB_OFFSET) & ACCEPT_PLINKS) != 0; |
| } |
| |
| /** |
| * mesh_accept_plinks_update: update accepting_plink in local mesh beacons |
| * |
| * @sdata: mesh interface in which mesh beacons are going to be updated |
| */ |
| void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) |
| { |
| bool free_plinks; |
| |
| /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0, |
| * the mesh interface might be able to establish plinks with peers that |
| * are already on the table but are not on PLINK_ESTAB state. However, |
| * in general the mesh interface is not accepting peer link requests |
| * from new peers, and that must be reflected in the beacon |
| */ |
| free_plinks = mesh_plink_availables(sdata); |
| |
| if (free_plinks != sdata->u.mesh.accepting_plinks) |
| ieee80211_mesh_housekeeping_timer((unsigned long) sdata); |
| } |
| |
| void mesh_ids_set_default(struct ieee80211_if_mesh *sta) |
| { |
| u8 def_id[4] = {0x00, 0x0F, 0xAC, 0xff}; |
| |
| memcpy(sta->mesh_pp_id, def_id, 4); |
| memcpy(sta->mesh_pm_id, def_id, 4); |
| memcpy(sta->mesh_cc_id, def_id, 4); |
| } |
| |
| int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) |
| { |
| int i; |
| |
| sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL); |
| if (!sdata->u.mesh.rmc) |
| return -ENOMEM; |
| sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1; |
| for (i = 0; i < RMC_BUCKETS; i++) |
| INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i].list); |
| return 0; |
| } |
| |
| void mesh_rmc_free(struct ieee80211_sub_if_data *sdata) |
| { |
| struct mesh_rmc *rmc = sdata->u.mesh.rmc; |
| struct rmc_entry *p, *n; |
| int i; |
| |
| if (!sdata->u.mesh.rmc) |
| return; |
| |
| for (i = 0; i < RMC_BUCKETS; i++) |
| list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) { |
| list_del(&p->list); |
| kmem_cache_free(rm_cache, p); |
| } |
| |
| kfree(rmc); |
| sdata->u.mesh.rmc = NULL; |
| } |
| |
| /** |
| * mesh_rmc_check - Check frame in recent multicast cache and add if absent. |
| * |
| * @sa: source address |
| * @mesh_hdr: mesh_header |
| * |
| * Returns: 0 if the frame is not in the cache, nonzero otherwise. |
| * |
| * Checks using the source address and the mesh sequence number if we have |
| * received this frame lately. If the frame is not in the cache, it is added to |
| * it. |
| */ |
| int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr, |
| struct ieee80211_sub_if_data *sdata) |
| { |
| struct mesh_rmc *rmc = sdata->u.mesh.rmc; |
| u32 seqnum = 0; |
| int entries = 0; |
| u8 idx; |
| struct rmc_entry *p, *n; |
| |
| /* Don't care about endianness since only match matters */ |
| memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum)); |
| idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask; |
| list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) { |
| ++entries; |
| if (time_after(jiffies, p->exp_time) || |
| (entries == RMC_QUEUE_MAX_LEN)) { |
| list_del(&p->list); |
| kmem_cache_free(rm_cache, p); |
| --entries; |
| } else if ((seqnum == p->seqnum) |
| && (memcmp(sa, p->sa, ETH_ALEN) == 0)) |
| return -1; |
| } |
| |
| p = kmem_cache_alloc(rm_cache, GFP_ATOMIC); |
| if (!p) { |
| printk(KERN_DEBUG "o11s: could not allocate RMC entry\n"); |
| return 0; |
| } |
| p->seqnum = seqnum; |
| p->exp_time = jiffies + RMC_TIMEOUT; |
| memcpy(p->sa, sa, ETH_ALEN); |
| list_add(&p->list, &rmc->bucket[idx].list); |
| return 0; |
| } |
| |
| void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_supported_band *sband; |
| u8 *pos; |
| int len, i, rate; |
| |
| sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; |
| len = sband->n_bitrates; |
| if (len > 8) |
| len = 8; |
| pos = skb_put(skb, len + 2); |
| *pos++ = WLAN_EID_SUPP_RATES; |
| *pos++ = len; |
| for (i = 0; i < len; i++) { |
| rate = sband->bitrates[i].bitrate; |
| *pos++ = (u8) (rate / 5); |
| } |
| |
| if (sband->n_bitrates > len) { |
| pos = skb_put(skb, sband->n_bitrates - len + 2); |
| *pos++ = WLAN_EID_EXT_SUPP_RATES; |
| *pos++ = sband->n_bitrates - len; |
| for (i = len; i < sband->n_bitrates; i++) { |
| rate = sband->bitrates[i].bitrate; |
| *pos++ = (u8) (rate / 5); |
| } |
| } |
| |
| pos = skb_put(skb, 2 + sdata->u.mesh.mesh_id_len); |
| *pos++ = WLAN_EID_MESH_ID; |
| *pos++ = sdata->u.mesh.mesh_id_len; |
| if (sdata->u.mesh.mesh_id_len) |
| memcpy(pos, sdata->u.mesh.mesh_id, sdata->u.mesh.mesh_id_len); |
| |
| pos = skb_put(skb, 21); |
| *pos++ = WLAN_EID_MESH_CONFIG; |
| *pos++ = MESH_CFG_LEN; |
| /* Version */ |
| *pos++ = 1; |
| |
| /* Active path selection protocol ID */ |
| memcpy(pos, sdata->u.mesh.mesh_pp_id, 4); |
| pos += 4; |
| |
| /* Active path selection metric ID */ |
| memcpy(pos, sdata->u.mesh.mesh_pm_id, 4); |
| pos += 4; |
| |
| /* Congestion control mode identifier */ |
| memcpy(pos, sdata->u.mesh.mesh_cc_id, 4); |
| pos += 4; |
| |
| /* Channel precedence: |
| * Not running simple channel unification protocol |
| */ |
| memset(pos, 0x00, 4); |
| pos += 4; |
| |
| /* Mesh capability */ |
| sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata); |
| *pos++ = sdata->u.mesh.accepting_plinks ? ACCEPT_PLINKS : 0x00; |
| *pos++ = 0x00; |
| |
| return; |
| } |
| |
| u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl) |
| { |
| /* Use last four bytes of hw addr and interface index as hash index */ |
| return jhash_2words(*(u32 *)(addr+2), sdata->dev->ifindex, tbl->hash_rnd) |
| & tbl->hash_mask; |
| } |
| |
| u8 mesh_id_hash(u8 *mesh_id, int mesh_id_len) |
| { |
| if (!mesh_id_len) |
| return 1; |
| else if (mesh_id_len == 1) |
| return (u8) mesh_id[0]; |
| else |
| return (u8) (mesh_id[0] + 2 * mesh_id[1]); |
| } |
| |
| struct mesh_table *mesh_table_alloc(int size_order) |
| { |
| int i; |
| struct mesh_table *newtbl; |
| |
| newtbl = kmalloc(sizeof(struct mesh_table), GFP_KERNEL); |
| if (!newtbl) |
| return NULL; |
| |
| newtbl->hash_buckets = kzalloc(sizeof(struct hlist_head) * |
| (1 << size_order), GFP_KERNEL); |
| |
| if (!newtbl->hash_buckets) { |
| kfree(newtbl); |
| return NULL; |
| } |
| |
| newtbl->hashwlock = kmalloc(sizeof(spinlock_t) * |
| (1 << size_order), GFP_KERNEL); |
| if (!newtbl->hashwlock) { |
| kfree(newtbl->hash_buckets); |
| kfree(newtbl); |
| return NULL; |
| } |
| |
| newtbl->size_order = size_order; |
| newtbl->hash_mask = (1 << size_order) - 1; |
| atomic_set(&newtbl->entries, 0); |
| get_random_bytes(&newtbl->hash_rnd, |
| sizeof(newtbl->hash_rnd)); |
| for (i = 0; i <= newtbl->hash_mask; i++) |
| spin_lock_init(&newtbl->hashwlock[i]); |
| |
| return newtbl; |
| } |
| |
| static void __mesh_table_free(struct mesh_table *tbl) |
| { |
| kfree(tbl->hash_buckets); |
| kfree(tbl->hashwlock); |
| kfree(tbl); |
| } |
| |
| void mesh_table_free(struct mesh_table *tbl, bool free_leafs) |
| { |
| struct hlist_head *mesh_hash; |
| struct hlist_node *p, *q; |
| int i; |
| |
| mesh_hash = tbl->hash_buckets; |
| for (i = 0; i <= tbl->hash_mask; i++) { |
| spin_lock(&tbl->hashwlock[i]); |
| hlist_for_each_safe(p, q, &mesh_hash[i]) { |
| tbl->free_node(p, free_leafs); |
| atomic_dec(&tbl->entries); |
| } |
| spin_unlock(&tbl->hashwlock[i]); |
| } |
| __mesh_table_free(tbl); |
| } |
| |
| static void ieee80211_mesh_path_timer(unsigned long data) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| (struct ieee80211_sub_if_data *) data; |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; |
| struct ieee80211_local *local = sdata->local; |
| |
| queue_work(local->hw.workqueue, &ifmsh->work); |
| } |
| |
| struct mesh_table *mesh_table_grow(struct mesh_table *tbl) |
| { |
| struct mesh_table *newtbl; |
| struct hlist_head *oldhash; |
| struct hlist_node *p, *q; |
| int i; |
| |
| if (atomic_read(&tbl->entries) |
| < tbl->mean_chain_len * (tbl->hash_mask + 1)) |
| goto endgrow; |
| |
| newtbl = mesh_table_alloc(tbl->size_order + 1); |
| if (!newtbl) |
| goto endgrow; |
| |
| newtbl->free_node = tbl->free_node; |
| newtbl->mean_chain_len = tbl->mean_chain_len; |
| newtbl->copy_node = tbl->copy_node; |
| atomic_set(&newtbl->entries, atomic_read(&tbl->entries)); |
| |
| oldhash = tbl->hash_buckets; |
| for (i = 0; i <= tbl->hash_mask; i++) |
| hlist_for_each(p, &oldhash[i]) |
| if (tbl->copy_node(p, newtbl) < 0) |
| goto errcopy; |
| |
| return newtbl; |
| |
| errcopy: |
| for (i = 0; i <= newtbl->hash_mask; i++) { |
| hlist_for_each_safe(p, q, &newtbl->hash_buckets[i]) |
| tbl->free_node(p, 0); |
| } |
| __mesh_table_free(newtbl); |
| endgrow: |
| return NULL; |
| } |
| |
| /** |
| * ieee80211_new_mesh_header - create a new mesh header |
| * @meshhdr: uninitialized mesh header |
| * @sdata: mesh interface to be used |
| * |
| * Return the header length. |
| */ |
| int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr, |
| struct ieee80211_sub_if_data *sdata) |
| { |
| meshhdr->flags = 0; |
| meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; |
| put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum); |
| sdata->u.mesh.mesh_seqnum++; |
| |
| return 6; |
| } |
| |
| static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_if_mesh *ifmsh) |
| { |
| bool free_plinks; |
| |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG |
| printk(KERN_DEBUG "%s: running mesh housekeeping\n", |
| sdata->dev->name); |
| #endif |
| |
| ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT); |
| mesh_path_expire(sdata); |
| |
| free_plinks = mesh_plink_availables(sdata); |
| if (free_plinks != sdata->u.mesh.accepting_plinks) |
| ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON); |
| |
| ifmsh->housekeeping = false; |
| mod_timer(&ifmsh->housekeeping_timer, |
| round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); |
| } |
| |
| |
| void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; |
| struct ieee80211_local *local = sdata->local; |
| |
| ifmsh->housekeeping = true; |
| queue_work(local->hw.workqueue, &ifmsh->work); |
| ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON); |
| } |
| |
| void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) |
| { |
| del_timer_sync(&sdata->u.mesh.housekeeping_timer); |
| /* |
| * If the timer fired while we waited for it, it will have |
| * requeued the work. Now the work will be running again |
| * but will not rearm the timer again because it checks |
| * whether the interface is running, which, at this point, |
| * it no longer is. |
| */ |
| cancel_work_sync(&sdata->u.mesh.work); |
| |
| /* |
| * When we get here, the interface is marked down. |
| * Call synchronize_rcu() to wait for the RX path |
| * should it be using the interface and enqueuing |
| * frames at this very time on another CPU. |
| */ |
| synchronize_rcu(); |
| skb_queue_purge(&sdata->u.mesh.skb_queue); |
| } |
| |
| static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, |
| u16 stype, |
| struct ieee80211_mgmt *mgmt, |
| size_t len, |
| struct ieee80211_rx_status *rx_status) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee802_11_elems elems; |
| struct ieee80211_channel *channel; |
| u64 supp_rates = 0; |
| size_t baselen; |
| int freq; |
| enum ieee80211_band band = rx_status->band; |
| |
| /* ignore ProbeResp to foreign address */ |
| if (stype == IEEE80211_STYPE_PROBE_RESP && |
| compare_ether_addr(mgmt->da, sdata->dev->dev_addr)) |
| return; |
| |
| baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; |
| if (baselen > len) |
| return; |
| |
| ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, |
| &elems); |
| |
| if (elems.ds_params && elems.ds_params_len == 1) |
| freq = ieee80211_channel_to_frequency(elems.ds_params[0]); |
| else |
| freq = rx_status->freq; |
| |
| channel = ieee80211_get_channel(local->hw.wiphy, freq); |
| |
| if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) |
| return; |
| |
| if (elems.mesh_id && elems.mesh_config && |
| mesh_matches_local(&elems, sdata)) { |
| supp_rates = ieee80211_sta_get_rates(local, &elems, band); |
| |
| mesh_neighbour_update(mgmt->sa, supp_rates, sdata, |
| mesh_peer_accepts_plinks(&elems)); |
| } |
| } |
| |
| static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, |
| size_t len, |
| struct ieee80211_rx_status *rx_status) |
| { |
| switch (mgmt->u.action.category) { |
| case PLINK_CATEGORY: |
| mesh_rx_plink_frame(sdata, mgmt, len, rx_status); |
| break; |
| case MESH_PATH_SEL_CATEGORY: |
| mesh_rx_path_sel_frame(sdata, mgmt, len); |
| break; |
| } |
| } |
| |
| static void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_rx_status *rx_status; |
| struct ieee80211_if_mesh *ifmsh; |
| struct ieee80211_mgmt *mgmt; |
| u16 stype; |
| |
| ifmsh = &sdata->u.mesh; |
| |
| rx_status = (struct ieee80211_rx_status *) skb->cb; |
| mgmt = (struct ieee80211_mgmt *) skb->data; |
| stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE; |
| |
| switch (stype) { |
| case IEEE80211_STYPE_PROBE_RESP: |
| case IEEE80211_STYPE_BEACON: |
| ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len, |
| rx_status); |
| break; |
| case IEEE80211_STYPE_ACTION: |
| ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status); |
| break; |
| } |
| |
| kfree_skb(skb); |
| } |
| |
| static void ieee80211_mesh_work(struct work_struct *work) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| container_of(work, struct ieee80211_sub_if_data, u.mesh.work); |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; |
| struct sk_buff *skb; |
| |
| if (!netif_running(sdata->dev)) |
| return; |
| |
| if (local->sw_scanning || local->hw_scanning) |
| return; |
| |
| while ((skb = skb_dequeue(&ifmsh->skb_queue))) |
| ieee80211_mesh_rx_queued_mgmt(sdata, skb); |
| |
| if (ifmsh->preq_queue_len && |
| time_after(jiffies, |
| ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval))) |
| mesh_path_start_discovery(sdata); |
| |
| if (ifmsh->housekeeping) |
| ieee80211_mesh_housekeeping(sdata, ifmsh); |
| } |
| |
| void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(sdata, &local->interfaces, list) |
| if (ieee80211_vif_is_mesh(&sdata->vif)) |
| queue_work(local->hw.workqueue, &sdata->u.mesh.work); |
| rcu_read_unlock(); |
| } |
| |
| void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; |
| |
| INIT_WORK(&ifmsh->work, ieee80211_mesh_work); |
| setup_timer(&ifmsh->housekeeping_timer, |
| ieee80211_mesh_housekeeping_timer, |
| (unsigned long) sdata); |
| skb_queue_head_init(&sdata->u.mesh.skb_queue); |
| |
| ifmsh->mshcfg.dot11MeshRetryTimeout = MESH_RET_T; |
| ifmsh->mshcfg.dot11MeshConfirmTimeout = MESH_CONF_T; |
| ifmsh->mshcfg.dot11MeshHoldingTimeout = MESH_HOLD_T; |
| ifmsh->mshcfg.dot11MeshMaxRetries = MESH_MAX_RETR; |
| ifmsh->mshcfg.dot11MeshTTL = MESH_TTL; |
| ifmsh->mshcfg.auto_open_plinks = true; |
| ifmsh->mshcfg.dot11MeshMaxPeerLinks = |
| MESH_MAX_ESTAB_PLINKS; |
| ifmsh->mshcfg.dot11MeshHWMPactivePathTimeout = |
| MESH_PATH_TIMEOUT; |
| ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval = |
| MESH_PREQ_MIN_INT; |
| ifmsh->mshcfg.dot11MeshHWMPnetDiameterTraversalTime = |
| MESH_DIAM_TRAVERSAL_TIME; |
| ifmsh->mshcfg.dot11MeshHWMPmaxPREQretries = |
| MESH_MAX_PREQ_RETRIES; |
| ifmsh->mshcfg.path_refresh_time = |
| MESH_PATH_REFRESH_TIME; |
| ifmsh->mshcfg.min_discovery_timeout = |
| MESH_MIN_DISCOVERY_TIMEOUT; |
| ifmsh->accepting_plinks = true; |
| ifmsh->preq_id = 0; |
| ifmsh->dsn = 0; |
| atomic_set(&ifmsh->mpaths, 0); |
| mesh_rmc_init(sdata); |
| ifmsh->last_preq = jiffies; |
| /* Allocate all mesh structures when creating the first mesh interface. */ |
| if (!mesh_allocated) |
| ieee80211s_init(); |
| mesh_ids_set_default(ifmsh); |
| setup_timer(&ifmsh->mesh_path_timer, |
| ieee80211_mesh_path_timer, |
| (unsigned long) sdata); |
| INIT_LIST_HEAD(&ifmsh->preq_queue.list); |
| spin_lock_init(&ifmsh->mesh_preq_queue_lock); |
| } |
| |
| ieee80211_rx_result |
| ieee80211_mesh_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, |
| struct ieee80211_rx_status *rx_status) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; |
| struct ieee80211_mgmt *mgmt; |
| u16 fc; |
| |
| if (skb->len < 24) |
| return RX_DROP_MONITOR; |
| |
| mgmt = (struct ieee80211_mgmt *) skb->data; |
| fc = le16_to_cpu(mgmt->frame_control); |
| |
| switch (fc & IEEE80211_FCTL_STYPE) { |
| case IEEE80211_STYPE_PROBE_RESP: |
| case IEEE80211_STYPE_BEACON: |
| case IEEE80211_STYPE_ACTION: |
| memcpy(skb->cb, rx_status, sizeof(*rx_status)); |
| skb_queue_tail(&ifmsh->skb_queue, skb); |
| queue_work(local->hw.workqueue, &ifmsh->work); |
| return RX_QUEUED; |
| } |
| |
| return RX_CONTINUE; |
| } |