| config RT2X00 |
| tristate "Ralink driver support" |
| depends on MAC80211 && WLAN_80211 && EXPERIMENTAL |
| ---help--- |
| This will enable the experimental support for the Ralink drivers, |
| developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. |
| |
| These drivers will make use of the mac80211 stack. |
| |
| When building one of the individual drivers, the rt2x00 library |
| will also be created. That library (when the driver is built as |
| a module) will be called "rt2x00lib.ko". |
| |
| if RT2X00 |
| |
| config RT2X00_LIB |
| tristate |
| |
| config RT2X00_LIB_PCI |
| tristate |
| select RT2X00_LIB |
| |
| config RT2X00_LIB_USB |
| tristate |
| select RT2X00_LIB |
| |
| config RT2X00_LIB_FIRMWARE |
| boolean |
| depends on RT2X00_LIB |
| select CRC_CCITT |
| select CRC_ITU_T |
| select FW_LOADER |
| |
| config RT2X00_LIB_RFKILL |
| boolean |
| depends on RT2X00_LIB |
| select RFKILL |
| select INPUT_POLLDEV |
| |
| config RT2X00_LIB_LEDS |
| boolean |
| depends on RT2X00_LIB |
| select NEW_LEDS |
| select LEDS_CLASS |
| select LEDS_TRIGGERS |
| select MAC80211_LEDS |
| |
| config RT2400PCI |
| tristate "Ralink rt2400 pci/pcmcia support" |
| depends on PCI |
| select RT2X00_LIB_PCI |
| select EEPROM_93CX6 |
| ---help--- |
| This is an experimental driver for the Ralink rt2400 wireless chip. |
| |
| When compiled as a module, this driver will be called "rt2400pci.ko". |
| |
| config RT2400PCI_RFKILL |
| bool "RT2400 rfkill support" |
| depends on RT2400PCI |
| select RT2X00_LIB_RFKILL |
| ---help--- |
| This adds support for integrated rt2400 devices that feature a |
| hardware button to control the radio state. |
| This feature depends on the RF switch subsystem rfkill. |
| |
| config RT2400PCI_LEDS |
| bool "RT2400 leds support" |
| depends on RT2400PCI |
| select RT2X00_LIB_LEDS |
| ---help--- |
| This adds support for led triggers provided my mac80211. |
| |
| config RT2500PCI |
| tristate "Ralink rt2500 pci/pcmcia support" |
| depends on PCI |
| select RT2X00_LIB_PCI |
| select EEPROM_93CX6 |
| ---help--- |
| This is an experimental driver for the Ralink rt2500 wireless chip. |
| |
| When compiled as a module, this driver will be called "rt2500pci.ko". |
| |
| config RT2500PCI_RFKILL |
| bool "RT2500 rfkill support" |
| depends on RT2500PCI |
| select RT2X00_LIB_RFKILL |
| ---help--- |
| This adds support for integrated rt2500 devices that feature a |
| hardware button to control the radio state. |
| This feature depends on the RF switch subsystem rfkill. |
| |
| config RT2500PCI_LEDS |
| bool "RT2500 leds support" |
| depends on RT2500PCI |
| select RT2X00_LIB_LEDS |
| ---help--- |
| This adds support for led triggers provided my mac80211. |
| |
| config RT61PCI |
| tristate "Ralink rt61 pci/pcmcia support" |
| depends on PCI |
| select RT2X00_LIB_PCI |
| select RT2X00_LIB_FIRMWARE |
| select EEPROM_93CX6 |
| ---help--- |
| This is an experimental driver for the Ralink rt61 wireless chip. |
| |
| When compiled as a module, this driver will be called "rt61pci.ko". |
| |
| config RT61PCI_RFKILL |
| bool "RT61 rfkill support" |
| depends on RT61PCI |
| select RT2X00_LIB_RFKILL |
| ---help--- |
| This adds support for integrated rt61 devices that feature a |
| hardware button to control the radio state. |
| This feature depends on the RF switch subsystem rfkill. |
| |
| config RT61PCI_LEDS |
| bool "RT61 leds support" |
| depends on RT61PCI |
| select RT2X00_LIB_LEDS |
| ---help--- |
| This adds support for led triggers provided my mac80211. |
| |
| config RT2500USB |
| tristate "Ralink rt2500 usb support" |
| depends on USB |
| select RT2X00_LIB_USB |
| ---help--- |
| This is an experimental driver for the Ralink rt2500 wireless chip. |
| |
| When compiled as a module, this driver will be called "rt2500usb.ko". |
| |
| config RT2500USB_LEDS |
| bool "RT2500 leds support" |
| depends on RT2500USB |
| select RT2X00_LIB_LEDS |
| ---help--- |
| This adds support for led triggers provided my mac80211. |
| |
| config RT73USB |
| tristate "Ralink rt73 usb support" |
| depends on USB |
| select RT2X00_LIB_USB |
| select RT2X00_LIB_FIRMWARE |
| ---help--- |
| This is an experimental driver for the Ralink rt73 wireless chip. |
| |
| When compiled as a module, this driver will be called "rt73usb.ko". |
| |
| config RT73USB_LEDS |
| bool "RT73 leds support" |
| depends on RT73USB |
| select RT2X00_LIB_LEDS |
| ---help--- |
| This adds support for led triggers provided my mac80211. |
| |
| config RT2X00_LIB_DEBUGFS |
| bool "Ralink debugfs support" |
| depends on RT2X00_LIB && MAC80211_DEBUGFS |
| ---help--- |
| Enable creation of debugfs files for the rt2x00 drivers. |
| These debugfs files support both reading and writing of the |
| most important register types of the rt2x00 devices. |
| |
| config RT2X00_DEBUG |
| bool "Ralink debug output" |
| depends on RT2X00_LIB |
| ---help--- |
| Enable debugging output for all rt2x00 modules |
| |
| endif |