arch/x86/kernel/mfgpt_32.c - LeafOS-Devices/android_kernel_realme_mt6785 - Gitiles

 /*
  * Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT)
  *
  * Copyright (C) 2006, Advanced Micro Devices, Inc.
  * Copyright (C) 2007, Andres Salomon <dilinger@debian.org>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of version 2 of the GNU General Public License
  * as published by the Free Software Foundation.
  *
  * The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book.
  */

 /*
  * We are using the 32.768kHz input clock - it's the only one that has the
  * ranges we find desirable.  The following table lists the suitable
  * divisors and the associated Hz, minimum interval and the maximum interval:
  *
  *  Divisor   Hz      Min Delta (s)  Max Delta (s)
  *   1        32768   .00048828125      2.000
  *   2        16384   .0009765625       4.000
  *   4         8192   .001953125        8.000
  *   8         4096   .00390625        16.000
  *   16        2048   .0078125         32.000
  *   32        1024   .015625          64.000
  *   64         512   .03125          128.000
  *  128         256   .0625           256.000
  *  256         128   .125            512.000
  */

 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/geode.h>

 static struct mfgpt_timer_t {
 	unsigned int avail:1;
 } mfgpt_timers[MFGPT_MAX_TIMERS];

 /* Selected from the table above */

 #define MFGPT_DIVISOR 16
 #define MFGPT_SCALE  4     /* divisor = 2^(scale) */
 #define MFGPT_HZ  (32768 / MFGPT_DIVISOR)
 #define MFGPT_PERIODIC (MFGPT_HZ / HZ)

 /* Allow for disabling of MFGPTs */
 static int disable;
 static int __init mfgpt_disable(char *s)
 {
 	disable = 1;
 	return 1;
 }
 __setup("nomfgpt", mfgpt_disable);

 /* Reset the MFGPT timers. This is required by some broken BIOSes which already
  * do the same and leave the system in an unstable state. TinyBIOS 0.98 is
  * affected at least (0.99 is OK with MFGPT workaround left to off).
  */
 static int __init mfgpt_fix(char *s)
 {
 	u32 val, dummy;

 	/* The following udocumented bit resets the MFGPT timers */
 	val = 0xFF; dummy = 0;
 	wrmsr(MSR_MFGPT_SETUP, val, dummy);
 	return 1;
 }
 __setup("mfgptfix", mfgpt_fix);

 /*
  * Check whether any MFGPTs are available for the kernel to use.  In most
  * cases, firmware that uses AMD's VSA code will claim all timers during
  * bootup; we certainly don't want to take them if they're already in use.
  * In other cases (such as with VSAless OpenFirmware), the system firmware
  * leaves timers available for us to use.
  */


 static int timers = -1;

 static void geode_mfgpt_detect(void)
 {
 	int i;
 	u16 val;

 	timers = 0;

 	if (disable) {
 		printk(KERN_INFO "geode-mfgpt:  MFGPT support is disabled\n");
 		goto done;
 	}

 	if (!geode_get_dev_base(GEODE_DEV_MFGPT)) {
 		printk(KERN_INFO "geode-mfgpt:  MFGPT LBAR is not set up\n");
 		goto done;
 	}

 	for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
 		val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
 		if (!(val & MFGPT_SETUP_SETUP)) {
 			mfgpt_timers[i].avail = 1;
 			timers++;
 		}
 	}

 done:
 	printk(KERN_INFO "geode-mfgpt:  %d MFGPT timers available.\n", timers);
 }

 int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
 {
 	u32 msr, mask, value, dummy;
 	int shift = (cmp == MFGPT_CMP1) ? 0 : 8;

 	if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
 		return -EIO;

 	/*
 	 * The register maps for these are described in sections 6.17.1.x of
 	 * the AMD Geode CS5536 Companion Device Data Book.
 	 */
 	switch (event) {
 	case MFGPT_EVENT_RESET:
 		/*
 		 * XXX: According to the docs, we cannot reset timers above
 		 * 6; that is, resets for 7 and 8 will be ignored.  Is this
 		 * a problem?   -dilinger
 		 */
 		msr = MSR_MFGPT_NR;
 		mask = 1 << (timer + 24);
 		break;

 	case MFGPT_EVENT_NMI:
 		msr = MSR_MFGPT_NR;
 		mask = 1 << (timer + shift);
 		break;

 	case MFGPT_EVENT_IRQ:
 		msr = MSR_MFGPT_IRQ;
 		mask = 1 << (timer + shift);
 		break;

 	default:
 		return -EIO;
 	}

 	rdmsr(msr, value, dummy);

 	if (enable)
 		value |= mask;
 	else
 		value &= ~mask;

 	wrmsr(msr, value, dummy);
 	return 0;
 }

 int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
 {
 	u32 val, dummy;
 	int offset;

 	if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
 		return -EIO;

 	if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
 		return -EIO;

 	rdmsr(MSR_PIC_ZSEL_LOW, val, dummy);

 	offset = (timer % 4) * 4;

 	val &= ~((0xF << offset) | (0xF << (offset + 16)));

 	if (enable) {
 		val |= (irq & 0x0F) << (offset);
 		val |= (irq & 0x0F) << (offset + 16);
 	}

 	wrmsr(MSR_PIC_ZSEL_LOW, val, dummy);
 	return 0;
 }

 static int mfgpt_get(int timer)
 {
 	mfgpt_timers[timer].avail = 0;
 	printk(KERN_INFO "geode-mfgpt:  Registered timer %d\n", timer);
 	return timer;
 }

 int geode_mfgpt_alloc_timer(int timer, int domain)
 {
 	int i;

 	if (timers == -1) {
 		/* timers haven't been detected yet */
 		geode_mfgpt_detect();
 	}

 	if (!timers)
 		return -1;

 	if (timer >= MFGPT_MAX_TIMERS)
 		return -1;

 	if (timer < 0) {
 		/* Try to find an available timer */
 		for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
 			if (mfgpt_timers[i].avail)
 				return mfgpt_get(i);

 			if (i == 5 && domain == MFGPT_DOMAIN_WORKING)
 				break;
 		}
 	} else {
 		/* If they requested a specific timer, try to honor that */
 		if (mfgpt_timers[timer].avail)
 			return mfgpt_get(timer);
 	}

 	/* No timers available - too bad */
 	return -1;
 }


 #ifdef CONFIG_GEODE_MFGPT_TIMER

 /*
  * The MFPGT timers on the CS5536 provide us with suitable timers to use
  * as clock event sources - not as good as a HPET or APIC, but certainly
  * better then the PIT.  This isn't a general purpose MFGPT driver, but
  * a simplified one designed specifically to act as a clock event source.
  * For full details about the MFGPT, please consult the CS5536 data sheet.
  */

 #include <linux/clocksource.h>
 #include <linux/clockchips.h>

 static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
 static u16 mfgpt_event_clock;

 static int irq = 7;
 static int __init mfgpt_setup(char *str)
 {
 	get_option(&str, &irq);
 	return 1;
 }
 __setup("mfgpt_irq=", mfgpt_setup);

 static void mfgpt_disable_timer(u16 clock)
 {
 	/* avoid races by clearing CMP1 and CMP2 unconditionally */
 	geode_mfgpt_write(clock, MFGPT_REG_SETUP, (u16) ~MFGPT_SETUP_CNTEN |
 			MFGPT_SETUP_CMP1 | MFGPT_SETUP_CMP2);
 }

 static int mfgpt_next_event(unsigned long, struct clock_event_device *);
 static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *);

 static struct clock_event_device mfgpt_clockevent = {
 	.name = "mfgpt-timer",
 	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode = mfgpt_set_mode,
 	.set_next_event = mfgpt_next_event,
 	.rating = 250,
 	.cpumask = CPU_MASK_ALL,
 	.shift = 32
 };

 static void mfgpt_start_timer(u16 delta)
 {
 	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta);
 	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);

 	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
 			  MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
 }

 static void mfgpt_set_mode(enum clock_event_mode mode,
 			   struct clock_event_device *evt)
 {
 	mfgpt_disable_timer(mfgpt_event_clock);

 	if (mode == CLOCK_EVT_MODE_PERIODIC)
 		mfgpt_start_timer(MFGPT_PERIODIC);

 	mfgpt_tick_mode = mode;
 }

 static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
 {
 	mfgpt_start_timer(delta);
 	return 0;
 }

 static irqreturn_t mfgpt_tick(int irq, void *dev_id)
 {
 	u16 val = geode_mfgpt_read(mfgpt_event_clock, MFGPT_REG_SETUP);

 	/* See if the interrupt was for us */
 	if (!(val & (MFGPT_SETUP_SETUP  | MFGPT_SETUP_CMP2 | MFGPT_SETUP_CMP1)))
 		return IRQ_NONE;

 	/* Turn off the clock (and clear the event) */
 	mfgpt_disable_timer(mfgpt_event_clock);

 	if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
 		return IRQ_HANDLED;

 	/* Clear the counter */
 	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);

 	/* Restart the clock in periodic mode */

 	if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) {
 		geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
 				  MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
 	}

 	mfgpt_clockevent.event_handler(&mfgpt_clockevent);
 	return IRQ_HANDLED;
 }

 static struct irqaction mfgptirq  = {
 	.handler = mfgpt_tick,
 	.flags = IRQF_DISABLED | IRQF_NOBALANCING,
 	.mask = CPU_MASK_NONE,
 	.name = "mfgpt-timer"
 };

 int __init mfgpt_timer_setup(void)
 {
 	int timer, ret;
 	u16 val;

 	timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
 	if (timer < 0) {
 		printk(KERN_ERR
 		       "mfgpt-timer:  Could not allocate a MFPGT timer\n");
 		return -ENODEV;
 	}

 	mfgpt_event_clock = timer;

 	/* Set up the IRQ on the MFGPT side */
 	if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
 		printk(KERN_ERR "mfgpt-timer:  Could not set up IRQ %d\n", irq);
 		return -EIO;
 	}

 	/* And register it with the kernel */
 	ret = setup_irq(irq, &mfgptirq);

 	if (ret) {
 		printk(KERN_ERR
 		       "mfgpt-timer:  Unable to set up the interrupt.\n");
 		goto err;
 	}

 	/* Set the clock scale and enable the event mode for CMP2 */
 	val = MFGPT_SCALE | (3 << 8);

 	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);

 	/* Set up the clock event */
 	mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC,
 				       mfgpt_clockevent.shift);
 	mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF,
 			&mfgpt_clockevent);
 	mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE,
 			&mfgpt_clockevent);

 	printk(KERN_INFO
 	       "mfgpt-timer:  registering the MFGPT timer as a clock event.\n");
 	clockevents_register_device(&mfgpt_clockevent);

 	return 0;

 err:
 	geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq);
 	printk(KERN_ERR
 	       "mfgpt-timer:  Unable to set up the MFGPT clock source\n");
 	return -EIO;
 }

 #endif
	/*
	* Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT)
	*
	* Copyright (C) 2006, Advanced Micro Devices, Inc.
	* Copyright (C) 2007, Andres Salomon <dilinger@debian.org>
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of version 2 of the GNU General Public License
	* as published by the Free Software Foundation.
	*
	* The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book.
	*/

	/*
	* We are using the 32.768kHz input clock - it's the only one that has the
	* ranges we find desirable. The following table lists the suitable
	* divisors and the associated Hz, minimum interval and the maximum interval:
	*
	* Divisor Hz Min Delta (s) Max Delta (s)
	* 1 32768 .00048828125 2.000
	* 2 16384 .0009765625 4.000
	* 4 8192 .001953125 8.000
	* 8 4096 .00390625 16.000
	* 16 2048 .0078125 32.000
	* 32 1024 .015625 64.000
	* 64 512 .03125 128.000
	* 128 256 .0625 256.000
	* 256 128 .125 512.000
	*/

	#include <linux/kernel.h>
	#include <linux/interrupt.h>
	#include <linux/module.h>
	#include <asm/geode.h>

	static struct mfgpt_timer_t {
	unsigned int avail:1;
	} mfgpt_timers[MFGPT_MAX_TIMERS];

	/* Selected from the table above */

	#define MFGPT_DIVISOR 16
	#define MFGPT_SCALE 4 /* divisor = 2^(scale) */
	#define MFGPT_HZ (32768 / MFGPT_DIVISOR)
	#define MFGPT_PERIODIC (MFGPT_HZ / HZ)

	/* Allow for disabling of MFGPTs */
	static int disable;
	static int __init mfgpt_disable(char *s)
	{
	disable = 1;
	return 1;
	}
	__setup("nomfgpt", mfgpt_disable);

	/* Reset the MFGPT timers. This is required by some broken BIOSes which already
	* do the same and leave the system in an unstable state. TinyBIOS 0.98 is
	* affected at least (0.99 is OK with MFGPT workaround left to off).
	*/
	static int __init mfgpt_fix(char *s)
	{
	u32 val, dummy;

	/* The following udocumented bit resets the MFGPT timers */
	val = 0xFF; dummy = 0;
	wrmsr(MSR_MFGPT_SETUP, val, dummy);
	return 1;
	}
	__setup("mfgptfix", mfgpt_fix);

	/*
	* Check whether any MFGPTs are available for the kernel to use. In most
	* cases, firmware that uses AMD's VSA code will claim all timers during
	* bootup; we certainly don't want to take them if they're already in use.
	* In other cases (such as with VSAless OpenFirmware), the system firmware
	* leaves timers available for us to use.
	*/


	static int timers = -1;

	static void geode_mfgpt_detect(void)
	{
	int i;
	u16 val;

	timers = 0;

	if (disable) {
	printk(KERN_INFO "geode-mfgpt: MFGPT support is disabled\n");
	goto done;
	}

	if (!geode_get_dev_base(GEODE_DEV_MFGPT)) {
	printk(KERN_INFO "geode-mfgpt: MFGPT LBAR is not set up\n");
	goto done;
	}

	for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
	val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
	if (!(val & MFGPT_SETUP_SETUP)) {
	mfgpt_timers[i].avail = 1;
	timers++;
	}
	}

	done:
	printk(KERN_INFO "geode-mfgpt: %d MFGPT timers available.\n", timers);
	}

	int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
	{
	u32 msr, mask, value, dummy;
	int shift = (cmp == MFGPT_CMP1) ? 0 : 8;

	if (timer < 0 \|\| timer >= MFGPT_MAX_TIMERS)
	return -EIO;

	/*
	* The register maps for these are described in sections 6.17.1.x of
	* the AMD Geode CS5536 Companion Device Data Book.
	*/
	switch (event) {
	case MFGPT_EVENT_RESET:
	/*
	* XXX: According to the docs, we cannot reset timers above
	* 6; that is, resets for 7 and 8 will be ignored. Is this
	* a problem? -dilinger
	*/
	msr = MSR_MFGPT_NR;
	mask = 1 << (timer + 24);
	break;

	case MFGPT_EVENT_NMI:
	msr = MSR_MFGPT_NR;
	mask = 1 << (timer + shift);
	break;

	case MFGPT_EVENT_IRQ:
	msr = MSR_MFGPT_IRQ;
	mask = 1 << (timer + shift);
	break;

	default:
	return -EIO;
	}

	rdmsr(msr, value, dummy);

	if (enable)
	value \|= mask;
	else
	value &= ~mask;

	wrmsr(msr, value, dummy);
	return 0;
	}

	int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
	{
	u32 val, dummy;
	int offset;

	if (timer < 0 \|\| timer >= MFGPT_MAX_TIMERS)
	return -EIO;

	if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
	return -EIO;

	rdmsr(MSR_PIC_ZSEL_LOW, val, dummy);

	offset = (timer % 4) * 4;

	val &= ~((0xF << offset) \| (0xF << (offset + 16)));

	if (enable) {
	val \|= (irq & 0x0F) << (offset);
	val \|= (irq & 0x0F) << (offset + 16);
	}

	wrmsr(MSR_PIC_ZSEL_LOW, val, dummy);
	return 0;
	}

	static int mfgpt_get(int timer)
	{
	mfgpt_timers[timer].avail = 0;
	printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer);
	return timer;
	}

	int geode_mfgpt_alloc_timer(int timer, int domain)
	{
	int i;

	if (timers == -1) {
	/* timers haven't been detected yet */
	geode_mfgpt_detect();
	}

	if (!timers)
	return -1;

	if (timer >= MFGPT_MAX_TIMERS)
	return -1;

	if (timer < 0) {
	/* Try to find an available timer */
	for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
	if (mfgpt_timers[i].avail)
	return mfgpt_get(i);

	if (i == 5 && domain == MFGPT_DOMAIN_WORKING)
	break;
	}
	} else {
	/* If they requested a specific timer, try to honor that */
	if (mfgpt_timers[timer].avail)
	return mfgpt_get(timer);
	}

	/* No timers available - too bad */
	return -1;
	}


	#ifdef CONFIG_GEODE_MFGPT_TIMER

	/*
	* The MFPGT timers on the CS5536 provide us with suitable timers to use
	* as clock event sources - not as good as a HPET or APIC, but certainly
	* better then the PIT. This isn't a general purpose MFGPT driver, but
	* a simplified one designed specifically to act as a clock event source.
	* For full details about the MFGPT, please consult the CS5536 data sheet.
	*/

	#include <linux/clocksource.h>
	#include <linux/clockchips.h>

	static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
	static u16 mfgpt_event_clock;

	static int irq = 7;
	static int __init mfgpt_setup(char *str)
	{
	get_option(&str, &irq);
	return 1;
	}
	__setup("mfgpt_irq=", mfgpt_setup);

	static void mfgpt_disable_timer(u16 clock)
	{
	/* avoid races by clearing CMP1 and CMP2 unconditionally */
	geode_mfgpt_write(clock, MFGPT_REG_SETUP, (u16) ~MFGPT_SETUP_CNTEN \|
	MFGPT_SETUP_CMP1 \| MFGPT_SETUP_CMP2);
	}

	static int mfgpt_next_event(unsigned long, struct clock_event_device *);
	static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *);

	static struct clock_event_device mfgpt_clockevent = {
	.name = "mfgpt-timer",
	.features = CLOCK_EVT_FEAT_PERIODIC \| CLOCK_EVT_FEAT_ONESHOT,
	.set_mode = mfgpt_set_mode,
	.set_next_event = mfgpt_next_event,
	.rating = 250,
	.cpumask = CPU_MASK_ALL,
	.shift = 32
	};

	static void mfgpt_start_timer(u16 delta)
	{
	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta);
	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);

	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
	MFGPT_SETUP_CNTEN \| MFGPT_SETUP_CMP2);
	}

	static void mfgpt_set_mode(enum clock_event_mode mode,
	struct clock_event_device *evt)
	{
	mfgpt_disable_timer(mfgpt_event_clock);

	if (mode == CLOCK_EVT_MODE_PERIODIC)
	mfgpt_start_timer(MFGPT_PERIODIC);

	mfgpt_tick_mode = mode;
	}

	static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
	{
	mfgpt_start_timer(delta);
	return 0;
	}

	static irqreturn_t mfgpt_tick(int irq, void *dev_id)
	{
	u16 val = geode_mfgpt_read(mfgpt_event_clock, MFGPT_REG_SETUP);

	/* See if the interrupt was for us */
	if (!(val & (MFGPT_SETUP_SETUP \| MFGPT_SETUP_CMP2 \| MFGPT_SETUP_CMP1)))
	return IRQ_NONE;

	/* Turn off the clock (and clear the event) */
	mfgpt_disable_timer(mfgpt_event_clock);

	if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
	return IRQ_HANDLED;

	/* Clear the counter */
	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);

	/* Restart the clock in periodic mode */

	if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) {
	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
	MFGPT_SETUP_CNTEN \| MFGPT_SETUP_CMP2);
	}

	mfgpt_clockevent.event_handler(&mfgpt_clockevent);
	return IRQ_HANDLED;
	}

	static struct irqaction mfgptirq = {
	.handler = mfgpt_tick,
	.flags = IRQF_DISABLED \| IRQF_NOBALANCING,
	.mask = CPU_MASK_NONE,
	.name = "mfgpt-timer"
	};

	int __init mfgpt_timer_setup(void)
	{
	int timer, ret;
	u16 val;

	timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
	if (timer < 0) {
	printk(KERN_ERR
	"mfgpt-timer: Could not allocate a MFPGT timer\n");
	return -ENODEV;
	}

	mfgpt_event_clock = timer;

	/* Set up the IRQ on the MFGPT side */
	if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
	printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq);
	return -EIO;
	}

	/* And register it with the kernel */
	ret = setup_irq(irq, &mfgptirq);

	if (ret) {
	printk(KERN_ERR
	"mfgpt-timer: Unable to set up the interrupt.\n");
	goto err;
	}

	/* Set the clock scale and enable the event mode for CMP2 */
	val = MFGPT_SCALE \| (3 << 8);

	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);

	/* Set up the clock event */
	mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC,
	mfgpt_clockevent.shift);
	mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF,
	&mfgpt_clockevent);
	mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE,
	&mfgpt_clockevent);

	printk(KERN_INFO
	"mfgpt-timer: registering the MFGPT timer as a clock event.\n");
	clockevents_register_device(&mfgpt_clockevent);

	return 0;

	err:
	geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq);
	printk(KERN_ERR
	"mfgpt-timer: Unable to set up the MFGPT clock source\n");
	return -EIO;
	}

	#endif