| /* |
| * Copyright (c) 2000-2001 Adaptec Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| * |
| * String handling code courtesy of Gerard Roudier's <groudier@club-internet.fr> |
| * sym driver. |
| * |
| * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_proc.c#29 $ |
| */ |
| #include "aic7xxx_osm.h" |
| #include "aic7xxx_inline.h" |
| #include "aic7xxx_93cx6.h" |
| |
| static void copy_mem_info(struct info_str *info, char *data, int len); |
| static int copy_info(struct info_str *info, char *fmt, ...); |
| static void ahc_dump_target_state(struct ahc_softc *ahc, |
| struct info_str *info, |
| u_int our_id, char channel, |
| u_int target_id, u_int target_offset); |
| static void ahc_dump_device_state(struct info_str *info, |
| struct ahc_linux_device *dev); |
| static int ahc_proc_write_seeprom(struct ahc_softc *ahc, |
| char *buffer, int length); |
| |
| static void |
| copy_mem_info(struct info_str *info, char *data, int len) |
| { |
| if (info->pos + len > info->offset + info->length) |
| len = info->offset + info->length - info->pos; |
| |
| if (info->pos + len < info->offset) { |
| info->pos += len; |
| return; |
| } |
| |
| if (info->pos < info->offset) { |
| off_t partial; |
| |
| partial = info->offset - info->pos; |
| data += partial; |
| info->pos += partial; |
| len -= partial; |
| } |
| |
| if (len > 0) { |
| memcpy(info->buffer, data, len); |
| info->pos += len; |
| info->buffer += len; |
| } |
| } |
| |
| static int |
| copy_info(struct info_str *info, char *fmt, ...) |
| { |
| va_list args; |
| char buf[256]; |
| int len; |
| |
| va_start(args, fmt); |
| len = vsprintf(buf, fmt, args); |
| va_end(args); |
| |
| copy_mem_info(info, buf, len); |
| return (len); |
| } |
| |
| void |
| ahc_format_transinfo(struct info_str *info, struct ahc_transinfo *tinfo) |
| { |
| u_int speed; |
| u_int freq; |
| u_int mb; |
| |
| speed = 3300; |
| freq = 0; |
| if (tinfo->offset != 0) { |
| freq = aic_calc_syncsrate(tinfo->period); |
| speed = freq; |
| } |
| speed *= (0x01 << tinfo->width); |
| mb = speed / 1000; |
| if (mb > 0) |
| copy_info(info, "%d.%03dMB/s transfers", mb, speed % 1000); |
| else |
| copy_info(info, "%dKB/s transfers", speed); |
| |
| if (freq != 0) { |
| copy_info(info, " (%d.%03dMHz%s, offset %d", |
| freq / 1000, freq % 1000, |
| (tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0 |
| ? " DT" : "", tinfo->offset); |
| } |
| |
| if (tinfo->width > 0) { |
| if (freq != 0) { |
| copy_info(info, ", "); |
| } else { |
| copy_info(info, " ("); |
| } |
| copy_info(info, "%dbit)", 8 * (0x01 << tinfo->width)); |
| } else if (freq != 0) { |
| copy_info(info, ")"); |
| } |
| copy_info(info, "\n"); |
| } |
| |
| static void |
| ahc_dump_target_state(struct ahc_softc *ahc, struct info_str *info, |
| u_int our_id, char channel, u_int target_id, |
| u_int target_offset) |
| { |
| struct ahc_linux_target *targ; |
| struct ahc_initiator_tinfo *tinfo; |
| struct ahc_tmode_tstate *tstate; |
| int lun; |
| |
| tinfo = ahc_fetch_transinfo(ahc, channel, our_id, |
| target_id, &tstate); |
| if ((ahc->features & AHC_TWIN) != 0) |
| copy_info(info, "Channel %c ", channel); |
| copy_info(info, "Target %d Negotiation Settings\n", target_id); |
| copy_info(info, "\tUser: "); |
| ahc_format_transinfo(info, &tinfo->user); |
| targ = ahc->platform_data->targets[target_offset]; |
| if (targ == NULL) |
| return; |
| |
| copy_info(info, "\tGoal: "); |
| ahc_format_transinfo(info, &tinfo->goal); |
| copy_info(info, "\tCurr: "); |
| ahc_format_transinfo(info, &tinfo->curr); |
| |
| for (lun = 0; lun < AHC_NUM_LUNS; lun++) { |
| struct ahc_linux_device *dev; |
| |
| dev = targ->devices[lun]; |
| |
| if (dev == NULL) |
| continue; |
| |
| ahc_dump_device_state(info, dev); |
| } |
| } |
| |
| static void |
| ahc_dump_device_state(struct info_str *info, struct ahc_linux_device *dev) |
| { |
| copy_info(info, "\tChannel %c Target %d Lun %d Settings\n", |
| dev->target->channel + 'A', dev->target->target, dev->lun); |
| |
| copy_info(info, "\t\tCommands Queued %ld\n", dev->commands_issued); |
| copy_info(info, "\t\tCommands Active %d\n", dev->active); |
| copy_info(info, "\t\tCommand Openings %d\n", dev->openings); |
| copy_info(info, "\t\tMax Tagged Openings %d\n", dev->maxtags); |
| copy_info(info, "\t\tDevice Queue Frozen Count %d\n", dev->qfrozen); |
| } |
| |
| static int |
| ahc_proc_write_seeprom(struct ahc_softc *ahc, char *buffer, int length) |
| { |
| struct seeprom_descriptor sd; |
| int have_seeprom; |
| u_long s; |
| int paused; |
| int written; |
| |
| /* Default to failure. */ |
| written = -EINVAL; |
| ahc_lock(ahc, &s); |
| paused = ahc_is_paused(ahc); |
| if (!paused) |
| ahc_pause(ahc); |
| |
| if (length != sizeof(struct seeprom_config)) { |
| printf("ahc_proc_write_seeprom: incorrect buffer size\n"); |
| goto done; |
| } |
| |
| have_seeprom = ahc_verify_cksum((struct seeprom_config*)buffer); |
| if (have_seeprom == 0) { |
| printf("ahc_proc_write_seeprom: cksum verification failed\n"); |
| goto done; |
| } |
| |
| sd.sd_ahc = ahc; |
| #if AHC_PCI_CONFIG > 0 |
| if ((ahc->chip & AHC_PCI) != 0) { |
| sd.sd_control_offset = SEECTL; |
| sd.sd_status_offset = SEECTL; |
| sd.sd_dataout_offset = SEECTL; |
| if (ahc->flags & AHC_LARGE_SEEPROM) |
| sd.sd_chip = C56_66; |
| else |
| sd.sd_chip = C46; |
| sd.sd_MS = SEEMS; |
| sd.sd_RDY = SEERDY; |
| sd.sd_CS = SEECS; |
| sd.sd_CK = SEECK; |
| sd.sd_DO = SEEDO; |
| sd.sd_DI = SEEDI; |
| have_seeprom = ahc_acquire_seeprom(ahc, &sd); |
| } else |
| #endif |
| if ((ahc->chip & AHC_VL) != 0) { |
| sd.sd_control_offset = SEECTL_2840; |
| sd.sd_status_offset = STATUS_2840; |
| sd.sd_dataout_offset = STATUS_2840; |
| sd.sd_chip = C46; |
| sd.sd_MS = 0; |
| sd.sd_RDY = EEPROM_TF; |
| sd.sd_CS = CS_2840; |
| sd.sd_CK = CK_2840; |
| sd.sd_DO = DO_2840; |
| sd.sd_DI = DI_2840; |
| have_seeprom = TRUE; |
| } else { |
| printf("ahc_proc_write_seeprom: unsupported adapter type\n"); |
| goto done; |
| } |
| |
| if (!have_seeprom) { |
| printf("ahc_proc_write_seeprom: No Serial EEPROM\n"); |
| goto done; |
| } else { |
| u_int start_addr; |
| |
| if (ahc->seep_config == NULL) { |
| ahc->seep_config = malloc(sizeof(*ahc->seep_config), |
| M_DEVBUF, M_NOWAIT); |
| if (ahc->seep_config == NULL) { |
| printf("aic7xxx: Unable to allocate serial " |
| "eeprom buffer. Write failing\n"); |
| goto done; |
| } |
| } |
| printf("aic7xxx: Writing Serial EEPROM\n"); |
| start_addr = 32 * (ahc->channel - 'A'); |
| ahc_write_seeprom(&sd, (u_int16_t *)buffer, start_addr, |
| sizeof(struct seeprom_config)/2); |
| ahc_read_seeprom(&sd, (uint16_t *)ahc->seep_config, |
| start_addr, sizeof(struct seeprom_config)/2); |
| #if AHC_PCI_CONFIG > 0 |
| if ((ahc->chip & AHC_VL) == 0) |
| ahc_release_seeprom(&sd); |
| #endif |
| written = length; |
| } |
| |
| done: |
| if (!paused) |
| ahc_unpause(ahc); |
| ahc_unlock(ahc, &s); |
| return (written); |
| } |
| |
| /* |
| * Return information to handle /proc support for the driver. |
| */ |
| int |
| ahc_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start, |
| off_t offset, int length, int inout) |
| { |
| struct ahc_softc *ahc; |
| struct info_str info; |
| char ahc_info[256]; |
| u_long s; |
| u_int max_targ; |
| u_int i; |
| int retval; |
| |
| retval = -EINVAL; |
| ahc_list_lock(&s); |
| ahc = ahc_find_softc(*(struct ahc_softc **)shost->hostdata); |
| if (ahc == NULL) |
| goto done; |
| |
| /* Has data been written to the file? */ |
| if (inout == TRUE) { |
| retval = ahc_proc_write_seeprom(ahc, buffer, length); |
| goto done; |
| } |
| |
| if (start) |
| *start = buffer; |
| |
| info.buffer = buffer; |
| info.length = length; |
| info.offset = offset; |
| info.pos = 0; |
| |
| copy_info(&info, "Adaptec AIC7xxx driver version: %s\n", |
| AIC7XXX_DRIVER_VERSION); |
| copy_info(&info, "%s\n", ahc->description); |
| ahc_controller_info(ahc, ahc_info); |
| copy_info(&info, "%s\n", ahc_info); |
| copy_info(&info, "Allocated SCBs: %d, SG List Length: %d\n\n", |
| ahc->scb_data->numscbs, AHC_NSEG); |
| |
| |
| if (ahc->seep_config == NULL) |
| copy_info(&info, "No Serial EEPROM\n"); |
| else { |
| copy_info(&info, "Serial EEPROM:\n"); |
| for (i = 0; i < sizeof(*ahc->seep_config)/2; i++) { |
| if (((i % 8) == 0) && (i != 0)) { |
| copy_info(&info, "\n"); |
| } |
| copy_info(&info, "0x%.4x ", |
| ((uint16_t*)ahc->seep_config)[i]); |
| } |
| copy_info(&info, "\n"); |
| } |
| copy_info(&info, "\n"); |
| |
| max_targ = 15; |
| if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0) |
| max_targ = 7; |
| |
| for (i = 0; i <= max_targ; i++) { |
| u_int our_id; |
| u_int target_id; |
| char channel; |
| |
| channel = 'A'; |
| our_id = ahc->our_id; |
| target_id = i; |
| if (i > 7 && (ahc->features & AHC_TWIN) != 0) { |
| channel = 'B'; |
| our_id = ahc->our_id_b; |
| target_id = i % 8; |
| } |
| |
| ahc_dump_target_state(ahc, &info, our_id, |
| channel, target_id, i); |
| } |
| retval = info.pos > info.offset ? info.pos - info.offset : 0; |
| done: |
| ahc_list_unlock(&s); |
| return (retval); |
| } |