| /* |
| * Copyright (C) ST-Ericsson SA 2012 |
| * |
| * Author: Ola Lilja <ola.o.lilja@stericsson.com>, |
| * Roger Nilsson <roger.xr.nilsson@stericsson.com> |
| * for ST-Ericsson. |
| * |
| * License terms: |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/bitops.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/mfd/dbx500-prcmu.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/board-mop500-msp.h> |
| |
| #include <sound/soc.h> |
| #include <sound/soc-dai.h> |
| |
| #include "ux500_msp_i2s.h" |
| #include "ux500_msp_dai.h" |
| |
| static int setup_pcm_multichan(struct snd_soc_dai *dai, |
| struct ux500_msp_config *msp_config) |
| { |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| struct msp_multichannel_config *multi = |
| &msp_config->multichannel_config; |
| |
| if (drvdata->slots > 1) { |
| msp_config->multichannel_configured = 1; |
| |
| multi->tx_multichannel_enable = true; |
| multi->rx_multichannel_enable = true; |
| multi->rx_comparison_enable_mode = MSP_COMPARISON_DISABLED; |
| |
| multi->tx_channel_0_enable = drvdata->tx_mask; |
| multi->tx_channel_1_enable = 0; |
| multi->tx_channel_2_enable = 0; |
| multi->tx_channel_3_enable = 0; |
| |
| multi->rx_channel_0_enable = drvdata->rx_mask; |
| multi->rx_channel_1_enable = 0; |
| multi->rx_channel_2_enable = 0; |
| multi->rx_channel_3_enable = 0; |
| |
| dev_dbg(dai->dev, |
| "%s: Multichannel enabled. Slots: %d, TX: %u, RX: %u\n", |
| __func__, drvdata->slots, multi->tx_channel_0_enable, |
| multi->rx_channel_0_enable); |
| } |
| |
| return 0; |
| } |
| |
| static int setup_frameper(struct snd_soc_dai *dai, unsigned int rate, |
| struct msp_protdesc *prot_desc) |
| { |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| |
| switch (drvdata->slots) { |
| case 1: |
| switch (rate) { |
| case 8000: |
| prot_desc->frame_period = |
| FRAME_PER_SINGLE_SLOT_8_KHZ; |
| break; |
| |
| case 16000: |
| prot_desc->frame_period = |
| FRAME_PER_SINGLE_SLOT_16_KHZ; |
| break; |
| |
| case 44100: |
| prot_desc->frame_period = |
| FRAME_PER_SINGLE_SLOT_44_1_KHZ; |
| break; |
| |
| case 48000: |
| prot_desc->frame_period = |
| FRAME_PER_SINGLE_SLOT_48_KHZ; |
| break; |
| |
| default: |
| dev_err(dai->dev, |
| "%s: Error: Unsupported sample-rate (freq = %d)!\n", |
| __func__, rate); |
| return -EINVAL; |
| } |
| break; |
| |
| case 2: |
| prot_desc->frame_period = FRAME_PER_2_SLOTS; |
| break; |
| |
| case 8: |
| prot_desc->frame_period = FRAME_PER_8_SLOTS; |
| break; |
| |
| case 16: |
| prot_desc->frame_period = FRAME_PER_16_SLOTS; |
| break; |
| default: |
| dev_err(dai->dev, |
| "%s: Error: Unsupported slot-count (slots = %d)!\n", |
| __func__, drvdata->slots); |
| return -EINVAL; |
| } |
| |
| prot_desc->clocks_per_frame = |
| prot_desc->frame_period+1; |
| |
| dev_dbg(dai->dev, "%s: Clocks per frame: %u\n", |
| __func__, |
| prot_desc->clocks_per_frame); |
| |
| return 0; |
| } |
| |
| static int setup_pcm_framing(struct snd_soc_dai *dai, unsigned int rate, |
| struct msp_protdesc *prot_desc) |
| { |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| |
| u32 frame_length = MSP_FRAME_LEN_1; |
| prot_desc->frame_width = 0; |
| |
| switch (drvdata->slots) { |
| case 1: |
| frame_length = MSP_FRAME_LEN_1; |
| break; |
| |
| case 2: |
| frame_length = MSP_FRAME_LEN_2; |
| break; |
| |
| case 8: |
| frame_length = MSP_FRAME_LEN_8; |
| break; |
| |
| case 16: |
| frame_length = MSP_FRAME_LEN_16; |
| break; |
| default: |
| dev_err(dai->dev, |
| "%s: Error: Unsupported slot-count (slots = %d)!\n", |
| __func__, drvdata->slots); |
| return -EINVAL; |
| } |
| |
| prot_desc->tx_frame_len_1 = frame_length; |
| prot_desc->rx_frame_len_1 = frame_length; |
| prot_desc->tx_frame_len_2 = frame_length; |
| prot_desc->rx_frame_len_2 = frame_length; |
| |
| prot_desc->tx_elem_len_1 = MSP_ELEM_LEN_16; |
| prot_desc->rx_elem_len_1 = MSP_ELEM_LEN_16; |
| prot_desc->tx_elem_len_2 = MSP_ELEM_LEN_16; |
| prot_desc->rx_elem_len_2 = MSP_ELEM_LEN_16; |
| |
| return setup_frameper(dai, rate, prot_desc); |
| } |
| |
| static int setup_clocking(struct snd_soc_dai *dai, |
| unsigned int fmt, |
| struct ux500_msp_config *msp_config) |
| { |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| |
| case SND_SOC_DAIFMT_NB_IF: |
| msp_config->tx_fsync_pol ^= 1 << TFSPOL_SHIFT; |
| msp_config->rx_fsync_pol ^= 1 << RFSPOL_SHIFT; |
| |
| break; |
| |
| default: |
| dev_err(dai->dev, |
| "%s: Error: Unsopported inversion (fmt = 0x%x)!\n", |
| __func__, fmt); |
| |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| dev_dbg(dai->dev, "%s: Codec is master.\n", __func__); |
| |
| msp_config->iodelay = 0x20; |
| msp_config->rx_fsync_sel = 0; |
| msp_config->tx_fsync_sel = 1 << TFSSEL_SHIFT; |
| msp_config->tx_clk_sel = 0; |
| msp_config->rx_clk_sel = 0; |
| msp_config->srg_clk_sel = 0x2 << SCKSEL_SHIFT; |
| |
| break; |
| |
| case SND_SOC_DAIFMT_CBS_CFS: |
| dev_dbg(dai->dev, "%s: Codec is slave.\n", __func__); |
| |
| msp_config->tx_clk_sel = TX_CLK_SEL_SRG; |
| msp_config->tx_fsync_sel = TX_SYNC_SRG_PROG; |
| msp_config->rx_clk_sel = RX_CLK_SEL_SRG; |
| msp_config->rx_fsync_sel = RX_SYNC_SRG; |
| msp_config->srg_clk_sel = 1 << SCKSEL_SHIFT; |
| |
| break; |
| |
| default: |
| dev_err(dai->dev, "%s: Error: Unsopported master (fmt = 0x%x)!\n", |
| __func__, fmt); |
| |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int setup_pcm_protdesc(struct snd_soc_dai *dai, |
| unsigned int fmt, |
| struct msp_protdesc *prot_desc) |
| { |
| prot_desc->rx_phase_mode = MSP_SINGLE_PHASE; |
| prot_desc->tx_phase_mode = MSP_SINGLE_PHASE; |
| prot_desc->rx_phase2_start_mode = MSP_PHASE2_START_MODE_IMEDIATE; |
| prot_desc->tx_phase2_start_mode = MSP_PHASE2_START_MODE_IMEDIATE; |
| prot_desc->rx_byte_order = MSP_BTF_MS_BIT_FIRST; |
| prot_desc->tx_byte_order = MSP_BTF_MS_BIT_FIRST; |
| prot_desc->tx_fsync_pol = MSP_FSYNC_POL(MSP_FSYNC_POL_ACT_HI); |
| prot_desc->rx_fsync_pol = MSP_FSYNC_POL_ACT_HI << RFSPOL_SHIFT; |
| |
| if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_DSP_A) { |
| dev_dbg(dai->dev, "%s: DSP_A.\n", __func__); |
| prot_desc->rx_clk_pol = MSP_RISING_EDGE; |
| prot_desc->tx_clk_pol = MSP_FALLING_EDGE; |
| |
| prot_desc->rx_data_delay = MSP_DELAY_1; |
| prot_desc->tx_data_delay = MSP_DELAY_1; |
| } else { |
| dev_dbg(dai->dev, "%s: DSP_B.\n", __func__); |
| prot_desc->rx_clk_pol = MSP_FALLING_EDGE; |
| prot_desc->tx_clk_pol = MSP_RISING_EDGE; |
| |
| prot_desc->rx_data_delay = MSP_DELAY_0; |
| prot_desc->tx_data_delay = MSP_DELAY_0; |
| } |
| |
| prot_desc->rx_half_word_swap = MSP_SWAP_NONE; |
| prot_desc->tx_half_word_swap = MSP_SWAP_NONE; |
| prot_desc->compression_mode = MSP_COMPRESS_MODE_LINEAR; |
| prot_desc->expansion_mode = MSP_EXPAND_MODE_LINEAR; |
| prot_desc->frame_sync_ignore = MSP_FSYNC_IGNORE; |
| |
| return 0; |
| } |
| |
| static int setup_i2s_protdesc(struct msp_protdesc *prot_desc) |
| { |
| prot_desc->rx_phase_mode = MSP_DUAL_PHASE; |
| prot_desc->tx_phase_mode = MSP_DUAL_PHASE; |
| prot_desc->rx_phase2_start_mode = MSP_PHASE2_START_MODE_FSYNC; |
| prot_desc->tx_phase2_start_mode = MSP_PHASE2_START_MODE_FSYNC; |
| prot_desc->rx_byte_order = MSP_BTF_MS_BIT_FIRST; |
| prot_desc->tx_byte_order = MSP_BTF_MS_BIT_FIRST; |
| prot_desc->tx_fsync_pol = MSP_FSYNC_POL(MSP_FSYNC_POL_ACT_LO); |
| prot_desc->rx_fsync_pol = MSP_FSYNC_POL_ACT_LO << RFSPOL_SHIFT; |
| |
| prot_desc->rx_frame_len_1 = MSP_FRAME_LEN_1; |
| prot_desc->rx_frame_len_2 = MSP_FRAME_LEN_1; |
| prot_desc->tx_frame_len_1 = MSP_FRAME_LEN_1; |
| prot_desc->tx_frame_len_2 = MSP_FRAME_LEN_1; |
| prot_desc->rx_elem_len_1 = MSP_ELEM_LEN_16; |
| prot_desc->rx_elem_len_2 = MSP_ELEM_LEN_16; |
| prot_desc->tx_elem_len_1 = MSP_ELEM_LEN_16; |
| prot_desc->tx_elem_len_2 = MSP_ELEM_LEN_16; |
| |
| prot_desc->rx_clk_pol = MSP_RISING_EDGE; |
| prot_desc->tx_clk_pol = MSP_FALLING_EDGE; |
| |
| prot_desc->rx_data_delay = MSP_DELAY_0; |
| prot_desc->tx_data_delay = MSP_DELAY_0; |
| |
| prot_desc->tx_half_word_swap = MSP_SWAP_NONE; |
| prot_desc->rx_half_word_swap = MSP_SWAP_NONE; |
| prot_desc->compression_mode = MSP_COMPRESS_MODE_LINEAR; |
| prot_desc->expansion_mode = MSP_EXPAND_MODE_LINEAR; |
| prot_desc->frame_sync_ignore = MSP_FSYNC_IGNORE; |
| |
| return 0; |
| } |
| |
| static int setup_msp_config(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai, |
| struct ux500_msp_config *msp_config) |
| { |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| struct msp_protdesc *prot_desc = &msp_config->protdesc; |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| unsigned int fmt = drvdata->fmt; |
| int ret; |
| |
| memset(msp_config, 0, sizeof(*msp_config)); |
| |
| msp_config->f_inputclk = drvdata->master_clk; |
| |
| msp_config->tx_fifo_config = TX_FIFO_ENABLE; |
| msp_config->rx_fifo_config = RX_FIFO_ENABLE; |
| msp_config->def_elem_len = 1; |
| msp_config->direction = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? |
| MSP_DIR_TX : MSP_DIR_RX; |
| msp_config->data_size = MSP_DATA_BITS_32; |
| msp_config->frame_freq = runtime->rate; |
| |
| dev_dbg(dai->dev, "%s: f_inputclk = %u, frame_freq = %u.\n", |
| __func__, msp_config->f_inputclk, msp_config->frame_freq); |
| /* To avoid division by zero */ |
| prot_desc->clocks_per_frame = 1; |
| |
| dev_dbg(dai->dev, "%s: rate: %u, channels: %d.\n", __func__, |
| runtime->rate, runtime->channels); |
| switch (fmt & |
| (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { |
| case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: |
| dev_dbg(dai->dev, "%s: SND_SOC_DAIFMT_I2S.\n", __func__); |
| |
| msp_config->default_protdesc = 1; |
| msp_config->protocol = MSP_I2S_PROTOCOL; |
| break; |
| |
| case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: |
| dev_dbg(dai->dev, "%s: SND_SOC_DAIFMT_I2S.\n", __func__); |
| |
| msp_config->data_size = MSP_DATA_BITS_16; |
| msp_config->protocol = MSP_I2S_PROTOCOL; |
| |
| ret = setup_i2s_protdesc(prot_desc); |
| if (ret < 0) |
| return ret; |
| |
| break; |
| |
| case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: |
| case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: |
| case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBS_CFS: |
| case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM: |
| dev_dbg(dai->dev, "%s: PCM format.\n", __func__); |
| |
| msp_config->data_size = MSP_DATA_BITS_16; |
| msp_config->protocol = MSP_PCM_PROTOCOL; |
| |
| ret = setup_pcm_protdesc(dai, fmt, prot_desc); |
| if (ret < 0) |
| return ret; |
| |
| ret = setup_pcm_multichan(dai, msp_config); |
| if (ret < 0) |
| return ret; |
| |
| ret = setup_pcm_framing(dai, runtime->rate, prot_desc); |
| if (ret < 0) |
| return ret; |
| |
| break; |
| |
| default: |
| dev_err(dai->dev, "%s: Error: Unsopported format (%d)!\n", |
| __func__, fmt); |
| return -EINVAL; |
| } |
| |
| return setup_clocking(dai, fmt, msp_config); |
| } |
| |
| static int ux500_msp_dai_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| int ret = 0; |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| |
| dev_dbg(dai->dev, "%s: MSP %d (%s): Enter.\n", __func__, dai->id, |
| snd_pcm_stream_str(substream)); |
| |
| /* Enable regulator */ |
| ret = regulator_enable(drvdata->reg_vape); |
| if (ret != 0) { |
| dev_err(drvdata->msp->dev, |
| "%s: Failed to enable regulator!\n", __func__); |
| return ret; |
| } |
| |
| /* Enable clock */ |
| dev_dbg(dai->dev, "%s: Enabling MSP-clock.\n", __func__); |
| clk_enable(drvdata->clk); |
| |
| return 0; |
| } |
| |
| static void ux500_msp_dai_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| int ret; |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| bool is_playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK); |
| |
| dev_dbg(dai->dev, "%s: MSP %d (%s): Enter.\n", __func__, dai->id, |
| snd_pcm_stream_str(substream)); |
| |
| if (drvdata->vape_opp_constraint == 1) { |
| prcmu_qos_update_requirement(PRCMU_QOS_APE_OPP, |
| "ux500_msp_i2s", 50); |
| drvdata->vape_opp_constraint = 0; |
| } |
| |
| if (ux500_msp_i2s_close(drvdata->msp, |
| is_playback ? MSP_DIR_TX : MSP_DIR_RX)) { |
| dev_err(dai->dev, |
| "%s: Error: MSP %d (%s): Unable to close i2s.\n", |
| __func__, dai->id, snd_pcm_stream_str(substream)); |
| } |
| |
| /* Disable clock */ |
| clk_disable(drvdata->clk); |
| |
| /* Disable regulator */ |
| ret = regulator_disable(drvdata->reg_vape); |
| if (ret < 0) |
| dev_err(dai->dev, |
| "%s: ERROR: Failed to disable regulator (%d)!\n", |
| __func__, ret); |
| } |
| |
| static int ux500_msp_dai_prepare(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| int ret = 0; |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct ux500_msp_config msp_config; |
| |
| dev_dbg(dai->dev, "%s: MSP %d (%s): Enter (rate = %d).\n", __func__, |
| dai->id, snd_pcm_stream_str(substream), runtime->rate); |
| |
| setup_msp_config(substream, dai, &msp_config); |
| |
| ret = ux500_msp_i2s_open(drvdata->msp, &msp_config); |
| if (ret < 0) { |
| dev_err(dai->dev, "%s: Error: msp_setup failed (ret = %d)!\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| /* Set OPP-level */ |
| if ((drvdata->fmt & SND_SOC_DAIFMT_MASTER_MASK) && |
| (drvdata->msp->f_bitclk > 19200000)) { |
| /* If the bit-clock is higher than 19.2MHz, Vape should be |
| * run in 100% OPP. Only when bit-clock is used (MSP master) */ |
| prcmu_qos_update_requirement(PRCMU_QOS_APE_OPP, |
| "ux500-msp-i2s", 100); |
| drvdata->vape_opp_constraint = 1; |
| } else { |
| prcmu_qos_update_requirement(PRCMU_QOS_APE_OPP, |
| "ux500-msp-i2s", 50); |
| drvdata->vape_opp_constraint = 0; |
| } |
| |
| return ret; |
| } |
| |
| static int ux500_msp_dai_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| unsigned int mask, slots_active; |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| |
| dev_dbg(dai->dev, "%s: MSP %d (%s): Enter.\n", |
| __func__, dai->id, snd_pcm_stream_str(substream)); |
| |
| switch (drvdata->fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| snd_pcm_hw_constraint_minmax(runtime, |
| SNDRV_PCM_HW_PARAM_CHANNELS, |
| 1, 2); |
| break; |
| |
| case SND_SOC_DAIFMT_DSP_B: |
| case SND_SOC_DAIFMT_DSP_A: |
| mask = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? |
| drvdata->tx_mask : |
| drvdata->rx_mask; |
| |
| slots_active = hweight32(mask); |
| dev_dbg(dai->dev, "TDM-slots active: %d", slots_active); |
| |
| snd_pcm_hw_constraint_minmax(runtime, |
| SNDRV_PCM_HW_PARAM_CHANNELS, |
| slots_active, slots_active); |
| break; |
| |
| default: |
| dev_err(dai->dev, |
| "%s: Error: Unsupported protocol (fmt = 0x%x)!\n", |
| __func__, drvdata->fmt); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int ux500_msp_dai_set_dai_fmt(struct snd_soc_dai *dai, |
| unsigned int fmt) |
| { |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| |
| dev_dbg(dai->dev, "%s: MSP %d: Enter.\n", __func__, dai->id); |
| |
| switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK | |
| SND_SOC_DAIFMT_MASTER_MASK)) { |
| case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: |
| case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: |
| case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBS_CFS: |
| case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM: |
| case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: |
| case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: |
| break; |
| |
| default: |
| dev_err(dai->dev, |
| "%s: Error: Unsupported protocol/master (fmt = 0x%x)!\n", |
| __func__, drvdata->fmt); |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| case SND_SOC_DAIFMT_NB_IF: |
| case SND_SOC_DAIFMT_IB_IF: |
| break; |
| |
| default: |
| dev_err(dai->dev, |
| "%s: Error: Unsupported inversion (fmt = 0x%x)!\n", |
| __func__, drvdata->fmt); |
| return -EINVAL; |
| } |
| |
| drvdata->fmt = fmt; |
| return 0; |
| } |
| |
| static int ux500_msp_dai_set_tdm_slot(struct snd_soc_dai *dai, |
| unsigned int tx_mask, |
| unsigned int rx_mask, |
| int slots, int slot_width) |
| { |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| unsigned int cap; |
| |
| switch (slots) { |
| case 1: |
| cap = 0x01; |
| break; |
| case 2: |
| cap = 0x03; |
| break; |
| case 8: |
| cap = 0xFF; |
| break; |
| case 16: |
| cap = 0xFFFF; |
| break; |
| default: |
| dev_err(dai->dev, "%s: Error: Unsupported slot-count (%d)!\n", |
| __func__, slots); |
| return -EINVAL; |
| } |
| drvdata->slots = slots; |
| |
| if (!(slot_width == 16)) { |
| dev_err(dai->dev, "%s: Error: Unsupported slot-width (%d)!\n", |
| __func__, slot_width); |
| return -EINVAL; |
| } |
| drvdata->slot_width = slot_width; |
| |
| drvdata->tx_mask = tx_mask & cap; |
| drvdata->rx_mask = rx_mask & cap; |
| |
| return 0; |
| } |
| |
| static int ux500_msp_dai_set_dai_sysclk(struct snd_soc_dai *dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| |
| dev_dbg(dai->dev, "%s: MSP %d: Enter. clk-id: %d, freq: %u.\n", |
| __func__, dai->id, clk_id, freq); |
| |
| switch (clk_id) { |
| case UX500_MSP_MASTER_CLOCK: |
| drvdata->master_clk = freq; |
| break; |
| |
| default: |
| dev_err(dai->dev, "%s: MSP %d: Invalid clk-id (%d)!\n", |
| __func__, dai->id, clk_id); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int ux500_msp_dai_trigger(struct snd_pcm_substream *substream, |
| int cmd, struct snd_soc_dai *dai) |
| { |
| int ret = 0; |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| |
| dev_dbg(dai->dev, "%s: MSP %d (%s): Enter (msp->id = %d, cmd = %d).\n", |
| __func__, dai->id, snd_pcm_stream_str(substream), |
| (int)drvdata->msp->id, cmd); |
| |
| ret = ux500_msp_i2s_trigger(drvdata->msp, cmd, substream->stream); |
| |
| return ret; |
| } |
| |
| static int ux500_msp_dai_probe(struct snd_soc_dai *dai) |
| { |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); |
| |
| drvdata->playback_dma_data.dma_cfg = drvdata->msp->dma_cfg_tx; |
| drvdata->capture_dma_data.dma_cfg = drvdata->msp->dma_cfg_rx; |
| |
| dai->playback_dma_data = &drvdata->playback_dma_data; |
| dai->capture_dma_data = &drvdata->capture_dma_data; |
| |
| drvdata->playback_dma_data.data_size = drvdata->slot_width; |
| drvdata->capture_dma_data.data_size = drvdata->slot_width; |
| |
| return 0; |
| } |
| |
| static struct snd_soc_dai_ops ux500_msp_dai_ops[] = { |
| { |
| .set_sysclk = ux500_msp_dai_set_dai_sysclk, |
| .set_fmt = ux500_msp_dai_set_dai_fmt, |
| .set_tdm_slot = ux500_msp_dai_set_tdm_slot, |
| .startup = ux500_msp_dai_startup, |
| .shutdown = ux500_msp_dai_shutdown, |
| .prepare = ux500_msp_dai_prepare, |
| .trigger = ux500_msp_dai_trigger, |
| .hw_params = ux500_msp_dai_hw_params, |
| } |
| }; |
| |
| static struct snd_soc_dai_driver ux500_msp_dai_drv[UX500_NBR_OF_DAI] = { |
| { |
| .name = "ux500-msp-i2s.0", |
| .probe = ux500_msp_dai_probe, |
| .id = 0, |
| .suspend = NULL, |
| .resume = NULL, |
| .playback = { |
| .channels_min = UX500_MSP_MIN_CHANNELS, |
| .channels_max = UX500_MSP_MAX_CHANNELS, |
| .rates = UX500_I2S_RATES, |
| .formats = UX500_I2S_FORMATS, |
| }, |
| .capture = { |
| .channels_min = UX500_MSP_MIN_CHANNELS, |
| .channels_max = UX500_MSP_MAX_CHANNELS, |
| .rates = UX500_I2S_RATES, |
| .formats = UX500_I2S_FORMATS, |
| }, |
| .ops = ux500_msp_dai_ops, |
| }, |
| { |
| .name = "ux500-msp-i2s.1", |
| .probe = ux500_msp_dai_probe, |
| .id = 1, |
| .suspend = NULL, |
| .resume = NULL, |
| .playback = { |
| .channels_min = UX500_MSP_MIN_CHANNELS, |
| .channels_max = UX500_MSP_MAX_CHANNELS, |
| .rates = UX500_I2S_RATES, |
| .formats = UX500_I2S_FORMATS, |
| }, |
| .capture = { |
| .channels_min = UX500_MSP_MIN_CHANNELS, |
| .channels_max = UX500_MSP_MAX_CHANNELS, |
| .rates = UX500_I2S_RATES, |
| .formats = UX500_I2S_FORMATS, |
| }, |
| .ops = ux500_msp_dai_ops, |
| }, |
| { |
| .name = "ux500-msp-i2s.2", |
| .id = 2, |
| .probe = ux500_msp_dai_probe, |
| .suspend = NULL, |
| .resume = NULL, |
| .playback = { |
| .channels_min = UX500_MSP_MIN_CHANNELS, |
| .channels_max = UX500_MSP_MAX_CHANNELS, |
| .rates = UX500_I2S_RATES, |
| .formats = UX500_I2S_FORMATS, |
| }, |
| .capture = { |
| .channels_min = UX500_MSP_MIN_CHANNELS, |
| .channels_max = UX500_MSP_MAX_CHANNELS, |
| .rates = UX500_I2S_RATES, |
| .formats = UX500_I2S_FORMATS, |
| }, |
| .ops = ux500_msp_dai_ops, |
| }, |
| { |
| .name = "ux500-msp-i2s.3", |
| .probe = ux500_msp_dai_probe, |
| .id = 3, |
| .suspend = NULL, |
| .resume = NULL, |
| .playback = { |
| .channels_min = UX500_MSP_MIN_CHANNELS, |
| .channels_max = UX500_MSP_MAX_CHANNELS, |
| .rates = UX500_I2S_RATES, |
| .formats = UX500_I2S_FORMATS, |
| }, |
| .capture = { |
| .channels_min = UX500_MSP_MIN_CHANNELS, |
| .channels_max = UX500_MSP_MAX_CHANNELS, |
| .rates = UX500_I2S_RATES, |
| .formats = UX500_I2S_FORMATS, |
| }, |
| .ops = ux500_msp_dai_ops, |
| }, |
| }; |
| |
| static int __devinit ux500_msp_drv_probe(struct platform_device *pdev) |
| { |
| struct ux500_msp_i2s_drvdata *drvdata; |
| int ret = 0; |
| |
| dev_dbg(&pdev->dev, "%s: Enter (pdev->name = %s).\n", __func__, |
| pdev->name); |
| |
| drvdata = devm_kzalloc(&pdev->dev, |
| sizeof(struct ux500_msp_i2s_drvdata), |
| GFP_KERNEL); |
| drvdata->fmt = 0; |
| drvdata->slots = 1; |
| drvdata->tx_mask = 0x01; |
| drvdata->rx_mask = 0x01; |
| drvdata->slot_width = 16; |
| drvdata->master_clk = MSP_INPUT_FREQ_APB; |
| |
| drvdata->reg_vape = devm_regulator_get(&pdev->dev, "v-ape"); |
| if (IS_ERR(drvdata->reg_vape)) { |
| ret = (int)PTR_ERR(drvdata->reg_vape); |
| dev_err(&pdev->dev, |
| "%s: ERROR: Failed to get Vape supply (%d)!\n", |
| __func__, ret); |
| return ret; |
| } |
| prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP, (char *)pdev->name, 50); |
| |
| drvdata->clk = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(drvdata->clk)) { |
| ret = (int)PTR_ERR(drvdata->clk); |
| dev_err(&pdev->dev, "%s: ERROR: clk_get failed (%d)!\n", |
| __func__, ret); |
| goto err_clk; |
| } |
| |
| ret = ux500_msp_i2s_init_msp(pdev, &drvdata->msp, |
| pdev->dev.platform_data); |
| if (!drvdata->msp) { |
| dev_err(&pdev->dev, |
| "%s: ERROR: Failed to init MSP-struct (%d)!", |
| __func__, ret); |
| goto err_init_msp; |
| } |
| dev_set_drvdata(&pdev->dev, drvdata); |
| |
| ret = snd_soc_register_dai(&pdev->dev, |
| &ux500_msp_dai_drv[drvdata->msp->id]); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Error: %s: Failed to register MSP%d!\n", |
| __func__, drvdata->msp->id); |
| goto err_init_msp; |
| } |
| |
| return 0; |
| |
| err_init_msp: |
| clk_put(drvdata->clk); |
| |
| err_clk: |
| devm_regulator_put(drvdata->reg_vape); |
| |
| return ret; |
| } |
| |
| static int __devexit ux500_msp_drv_remove(struct platform_device *pdev) |
| { |
| struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(&pdev->dev); |
| |
| snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(ux500_msp_dai_drv)); |
| |
| devm_regulator_put(drvdata->reg_vape); |
| prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP, "ux500_msp_i2s"); |
| |
| clk_put(drvdata->clk); |
| |
| ux500_msp_i2s_cleanup_msp(pdev, drvdata->msp); |
| |
| return 0; |
| } |
| |
| static struct platform_driver msp_i2s_driver = { |
| .driver = { |
| .name = "ux500-msp-i2s", |
| .owner = THIS_MODULE, |
| }, |
| .probe = ux500_msp_drv_probe, |
| .remove = ux500_msp_drv_remove, |
| }; |
| module_platform_driver(msp_i2s_driver); |
| |
| MODULE_LICENSE("GPL v2"); |