| /* |
| * arch/sh/drivers/pci/pci.c |
| * |
| * Copyright (c) 2002 M. R. Brown <mrbrown@linux-sh.org> |
| * Copyright (c) 2004 - 2006 Paul Mundt <lethal@linux-sh.org> |
| * |
| * These functions are collected here to reduce duplication of common |
| * code amongst the many platform-specific PCI support code files. |
| * |
| * These routines require the following board-specific routines: |
| * void pcibios_fixup_irqs(); |
| * |
| * See include/asm-sh/pci.h for more information. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <asm/io.h> |
| |
| static int __init pcibios_init(void) |
| { |
| struct pci_channel *p; |
| struct pci_bus *bus; |
| int busno; |
| |
| #ifdef CONFIG_PCI_AUTO |
| /* assign resources */ |
| busno = 0; |
| for (p = board_pci_channels; p->pci_ops != NULL; p++) |
| busno = pciauto_assign_resources(busno, p) + 1; |
| #endif |
| |
| /* scan the buses */ |
| busno = 0; |
| for (p = board_pci_channels; p->pci_ops != NULL; p++) { |
| bus = pci_scan_bus(busno, p->pci_ops, p); |
| busno = bus->subordinate + 1; |
| } |
| |
| pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); |
| |
| return 0; |
| } |
| subsys_initcall(pcibios_init); |
| |
| /* |
| * Called after each bus is probed, but before its children |
| * are examined. |
| */ |
| void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) |
| { |
| pci_read_bridge_bases(bus); |
| } |
| |
| void pcibios_align_resource(void *data, struct resource *res, |
| resource_size_t size, resource_size_t align) |
| __attribute__ ((weak)); |
| |
| /* |
| * We need to avoid collisions with `mirrored' VGA ports |
| * and other strange ISA hardware, so we always want the |
| * addresses to be allocated in the 0x000-0x0ff region |
| * modulo 0x400. |
| */ |
| void pcibios_align_resource(void *data, struct resource *res, |
| resource_size_t size, resource_size_t align) |
| { |
| if (res->flags & IORESOURCE_IO) { |
| resource_size_t start = res->start; |
| |
| if (start & 0x300) { |
| start = (start + 0x3ff) & ~0x3ff; |
| res->start = start; |
| } |
| } |
| } |
| |
| int pcibios_enable_device(struct pci_dev *dev, int mask) |
| { |
| u16 cmd, old_cmd; |
| int idx; |
| struct resource *r; |
| |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); |
| old_cmd = cmd; |
| for(idx=0; idx<6; idx++) { |
| if (!(mask & (1 << idx))) |
| continue; |
| r = &dev->resource[idx]; |
| if (!r->start && r->end) { |
| printk(KERN_ERR "PCI: Device %s not available because " |
| "of resource collisions\n", pci_name(dev)); |
| return -EINVAL; |
| } |
| if (r->flags & IORESOURCE_IO) |
| cmd |= PCI_COMMAND_IO; |
| if (r->flags & IORESOURCE_MEM) |
| cmd |= PCI_COMMAND_MEMORY; |
| } |
| if (dev->resource[PCI_ROM_RESOURCE].start) |
| cmd |= PCI_COMMAND_MEMORY; |
| if (cmd != old_cmd) { |
| printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", |
| pci_name(dev), old_cmd, cmd); |
| pci_write_config_word(dev, PCI_COMMAND, cmd); |
| } |
| return 0; |
| } |
| |
| /* |
| * If we set up a device for bus mastering, we need to check and set |
| * the latency timer as it may not be properly set. |
| */ |
| static unsigned int pcibios_max_latency = 255; |
| |
| void pcibios_set_master(struct pci_dev *dev) |
| { |
| u8 lat; |
| pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); |
| if (lat < 16) |
| lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; |
| else if (lat > pcibios_max_latency) |
| lat = pcibios_max_latency; |
| else |
| return; |
| printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", |
| pci_name(dev), lat); |
| pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); |
| } |
| |
| void __init pcibios_update_irq(struct pci_dev *dev, int irq) |
| { |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); |
| } |
| |
| void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) |
| { |
| resource_size_t start = pci_resource_start(dev, bar); |
| resource_size_t len = pci_resource_len(dev, bar); |
| unsigned long flags = pci_resource_flags(dev, bar); |
| |
| if (unlikely(!len || !start)) |
| return NULL; |
| if (maxlen && len > maxlen) |
| len = maxlen; |
| |
| /* |
| * Presently the IORESOURCE_MEM case is a bit special, most |
| * SH7751 style PCI controllers have PCI memory at a fixed |
| * location in the address space where no remapping is desired |
| * (typically at 0xfd000000, but is_pci_memaddr() will know |
| * best). With the IORESOURCE_MEM case more care has to be taken |
| * to inhibit page table mapping for legacy cores, but this is |
| * punted off to __ioremap(). |
| * -- PFM. |
| */ |
| if (flags & IORESOURCE_IO) |
| return ioport_map(start, len); |
| if (flags & IORESOURCE_MEM) |
| return ioremap(start, len); |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(pci_iomap); |
| |
| void pci_iounmap(struct pci_dev *dev, void __iomem *addr) |
| { |
| iounmap(addr); |
| } |
| EXPORT_SYMBOL(pci_iounmap); |