| /* |
| * linux/drivers/usb/gadget/pxa2xx_udc.h |
| * Intel PXA2xx on-chip full speed USB device controller |
| * |
| * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix |
| * Copyright (C) 2003 David Brownell |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #ifndef __LINUX_USB_GADGET_PXA2XX_H |
| #define __LINUX_USB_GADGET_PXA2XX_H |
| |
| #include <linux/types.h> |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* pxa2xx has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */ |
| #define UFNRH_SIR (1 << 7) /* SOF interrupt request */ |
| #define UFNRH_SIM (1 << 6) /* SOF interrupt mask */ |
| #define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */ |
| #define UFNRH_IPE9 (1 << 4) /* ISO packet error, ep9 */ |
| #define UFNRH_IPE4 (1 << 3) /* ISO packet error, ep4 */ |
| |
| /* pxa255 has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */ |
| #define UDCCFR UDC_RES2 /* UDC Control Function Register */ |
| #define UDCCFR_AREN (1 << 7) /* ACK response enable (now) */ |
| #define UDCCFR_ACM (1 << 2) /* ACK control mode (wait for AREN) */ |
| |
| /* latest pxa255 errata define new "must be one" bits in UDCCFR */ |
| #define UDCCFR_MB1 (0xff & ~(UDCCFR_AREN|UDCCFR_ACM)) |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| struct pxa2xx_udc; |
| |
| struct pxa2xx_ep { |
| struct usb_ep ep; |
| struct pxa2xx_udc *dev; |
| |
| const struct usb_endpoint_descriptor *desc; |
| struct list_head queue; |
| unsigned long pio_irqs; |
| unsigned long dma_irqs; |
| short dma; |
| |
| unsigned short fifo_size; |
| u8 bEndpointAddress; |
| u8 bmAttributes; |
| |
| unsigned stopped : 1; |
| unsigned dma_fixup : 1; |
| |
| /* UDCCS = UDC Control/Status for this EP |
| * UBCR = UDC Byte Count Remaining (contents of OUT fifo) |
| * UDDR = UDC Endpoint Data Register (the fifo) |
| * DRCM = DMA Request Channel Map |
| */ |
| volatile u32 *reg_udccs; |
| volatile u32 *reg_ubcr; |
| volatile u32 *reg_uddr; |
| #ifdef USE_DMA |
| volatile u32 *reg_drcmr; |
| #define drcmr(n) .reg_drcmr = & DRCMR ## n , |
| #else |
| #define drcmr(n) |
| #endif |
| }; |
| |
| struct pxa2xx_request { |
| struct usb_request req; |
| struct list_head queue; |
| }; |
| |
| enum ep0_state { |
| EP0_IDLE, |
| EP0_IN_DATA_PHASE, |
| EP0_OUT_DATA_PHASE, |
| EP0_END_XFER, |
| EP0_STALL, |
| }; |
| |
| #define EP0_FIFO_SIZE ((unsigned)16) |
| #define BULK_FIFO_SIZE ((unsigned)64) |
| #define ISO_FIFO_SIZE ((unsigned)256) |
| #define INT_FIFO_SIZE ((unsigned)8) |
| |
| struct udc_stats { |
| struct ep0stats { |
| unsigned long ops; |
| unsigned long bytes; |
| } read, write; |
| unsigned long irqs; |
| }; |
| |
| #ifdef CONFIG_USB_PXA2XX_SMALL |
| /* when memory's tight, SMALL config saves code+data. */ |
| #undef USE_DMA |
| #define PXA_UDC_NUM_ENDPOINTS 3 |
| #endif |
| |
| #ifndef PXA_UDC_NUM_ENDPOINTS |
| #define PXA_UDC_NUM_ENDPOINTS 16 |
| #endif |
| |
| struct pxa2xx_udc { |
| struct usb_gadget gadget; |
| struct usb_gadget_driver *driver; |
| |
| enum ep0_state ep0state; |
| struct udc_stats stats; |
| unsigned got_irq : 1, |
| vbus : 1, |
| pullup : 1, |
| has_cfr : 1, |
| req_pending : 1, |
| req_std : 1, |
| req_config : 1; |
| |
| #define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200)) |
| struct timer_list timer; |
| |
| struct device *dev; |
| struct pxa2xx_udc_mach_info *mach; |
| u64 dma_mask; |
| struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS]; |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #ifdef CONFIG_ARCH_LUBBOCK |
| #include <asm/arch/lubbock.h> |
| /* lubbock can also report usb connect/disconnect irqs */ |
| |
| #ifdef DEBUG |
| #define HEX_DISPLAY(n) if (machine_is_lubbock()) { LUB_HEXLED = (n); } |
| #endif |
| |
| #endif |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* LEDs are only for debug */ |
| #ifndef HEX_DISPLAY |
| #define HEX_DISPLAY(n) do {} while(0) |
| #endif |
| |
| #ifdef DEBUG |
| #include <asm/leds.h> |
| |
| #define LED_CONNECTED_ON leds_event(led_green_on) |
| #define LED_CONNECTED_OFF do { \ |
| leds_event(led_green_off); \ |
| HEX_DISPLAY(0); \ |
| } while(0) |
| #endif |
| |
| #ifndef LED_CONNECTED_ON |
| #define LED_CONNECTED_ON do {} while(0) |
| #define LED_CONNECTED_OFF do {} while(0) |
| #endif |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static struct pxa2xx_udc *the_controller; |
| |
| static inline int pxa_gpio_get(unsigned gpio) |
| { |
| return (GPLR(gpio) & GPIO_bit(gpio)) != 0; |
| } |
| |
| static inline void pxa_gpio_set(unsigned gpio, int is_on) |
| { |
| int mask = GPIO_bit(gpio); |
| |
| if (is_on) |
| GPSR(gpio) = mask; |
| else |
| GPCR(gpio) = mask; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * Debugging support vanishes in non-debug builds. DBG_NORMAL should be |
| * mostly silent during normal use/testing, with no timing side-effects. |
| */ |
| #define DBG_NORMAL 1 /* error paths, device state transitions */ |
| #define DBG_VERBOSE 2 /* add some success path trace info */ |
| #define DBG_NOISY 3 /* ... even more: request level */ |
| #define DBG_VERY_NOISY 4 /* ... even more: packet level */ |
| |
| #ifdef DEBUG |
| |
| static const char *state_name[] = { |
| "EP0_IDLE", |
| "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE", |
| "EP0_END_XFER", "EP0_STALL" |
| }; |
| |
| #define DMSG(stuff...) printk(KERN_DEBUG "udc: " stuff) |
| |
| #ifdef VERBOSE |
| # define UDC_DEBUG DBG_VERBOSE |
| #else |
| # define UDC_DEBUG DBG_NORMAL |
| #endif |
| |
| static void __attribute__ ((__unused__)) |
| dump_udccr(const char *label) |
| { |
| u32 udccr = UDCCR; |
| DMSG("%s %02X =%s%s%s%s%s%s%s%s\n", |
| label, udccr, |
| (udccr & UDCCR_REM) ? " rem" : "", |
| (udccr & UDCCR_RSTIR) ? " rstir" : "", |
| (udccr & UDCCR_SRM) ? " srm" : "", |
| (udccr & UDCCR_SUSIR) ? " susir" : "", |
| (udccr & UDCCR_RESIR) ? " resir" : "", |
| (udccr & UDCCR_RSM) ? " rsm" : "", |
| (udccr & UDCCR_UDA) ? " uda" : "", |
| (udccr & UDCCR_UDE) ? " ude" : ""); |
| } |
| |
| static void __attribute__ ((__unused__)) |
| dump_udccs0(const char *label) |
| { |
| u32 udccs0 = UDCCS0; |
| |
| DMSG("%s %s %02X =%s%s%s%s%s%s%s%s\n", |
| label, state_name[the_controller->ep0state], udccs0, |
| (udccs0 & UDCCS0_SA) ? " sa" : "", |
| (udccs0 & UDCCS0_RNE) ? " rne" : "", |
| (udccs0 & UDCCS0_FST) ? " fst" : "", |
| (udccs0 & UDCCS0_SST) ? " sst" : "", |
| (udccs0 & UDCCS0_DRWF) ? " dwrf" : "", |
| (udccs0 & UDCCS0_FTF) ? " ftf" : "", |
| (udccs0 & UDCCS0_IPR) ? " ipr" : "", |
| (udccs0 & UDCCS0_OPR) ? " opr" : ""); |
| } |
| |
| static void __attribute__ ((__unused__)) |
| dump_state(struct pxa2xx_udc *dev) |
| { |
| u32 tmp; |
| unsigned i; |
| |
| DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", |
| is_usb_connected() ? "host " : "disconnected", |
| state_name[dev->ep0state], |
| UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); |
| dump_udccr("udccr"); |
| if (dev->has_cfr) { |
| tmp = UDCCFR; |
| DMSG("udccfr %02X =%s%s\n", tmp, |
| (tmp & UDCCFR_AREN) ? " aren" : "", |
| (tmp & UDCCFR_ACM) ? " acm" : ""); |
| } |
| |
| if (!dev->driver) { |
| DMSG("no gadget driver bound\n"); |
| return; |
| } else |
| DMSG("ep0 driver '%s'\n", dev->driver->driver.name); |
| |
| if (!is_usb_connected()) |
| return; |
| |
| dump_udccs0 ("udccs0"); |
| DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n", |
| dev->stats.write.bytes, dev->stats.write.ops, |
| dev->stats.read.bytes, dev->stats.read.ops); |
| |
| for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) { |
| if (dev->ep [i].desc == 0) |
| continue; |
| DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs); |
| } |
| } |
| |
| #else |
| |
| #define DMSG(stuff...) do{}while(0) |
| |
| #define dump_udccr(x) do{}while(0) |
| #define dump_udccs0(x) do{}while(0) |
| #define dump_state(x) do{}while(0) |
| |
| #define UDC_DEBUG ((unsigned)0) |
| |
| #endif |
| |
| #define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0) |
| |
| #define WARN(stuff...) printk(KERN_WARNING "udc: " stuff) |
| #define INFO(stuff...) printk(KERN_INFO "udc: " stuff) |
| |
| |
| #endif /* __LINUX_USB_GADGET_PXA2XX_H */ |