| /* |
| * Copyright (C) 2008-2010 |
| * |
| * - Kurt Van Dijck, EIA Electronics |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the version 2 of the GNU General Public License |
| * as published by the Free Software Foundation |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/firmware.h> |
| #include <linux/sched/signal.h> |
| #include <asm/div64.h> |
| #include <asm/io.h> |
| |
| #include "softing.h" |
| |
| /* |
| * low level DPRAM command. |
| * Make sure that card->dpram[DPRAM_FCT_HOST] is preset |
| */ |
| static int _softing_fct_cmd(struct softing *card, int16_t cmd, uint16_t vector, |
| const char *msg) |
| { |
| int ret; |
| unsigned long stamp; |
| |
| iowrite16(cmd, &card->dpram[DPRAM_FCT_PARAM]); |
| iowrite8(vector >> 8, &card->dpram[DPRAM_FCT_HOST + 1]); |
| iowrite8(vector, &card->dpram[DPRAM_FCT_HOST]); |
| /* be sure to flush this to the card */ |
| wmb(); |
| stamp = jiffies + 1 * HZ; |
| /* wait for card */ |
| do { |
| /* DPRAM_FCT_HOST is _not_ aligned */ |
| ret = ioread8(&card->dpram[DPRAM_FCT_HOST]) + |
| (ioread8(&card->dpram[DPRAM_FCT_HOST + 1]) << 8); |
| /* don't have any cached variables */ |
| rmb(); |
| if (ret == RES_OK) |
| /* read return-value now */ |
| return ioread16(&card->dpram[DPRAM_FCT_RESULT]); |
| |
| if ((ret != vector) || time_after(jiffies, stamp)) |
| break; |
| /* process context => relax */ |
| usleep_range(500, 10000); |
| } while (1); |
| |
| ret = (ret == RES_NONE) ? -ETIMEDOUT : -ECANCELED; |
| dev_alert(&card->pdev->dev, "firmware %s failed (%i)\n", msg, ret); |
| return ret; |
| } |
| |
| static int softing_fct_cmd(struct softing *card, int16_t cmd, const char *msg) |
| { |
| int ret; |
| |
| ret = _softing_fct_cmd(card, cmd, 0, msg); |
| if (ret > 0) { |
| dev_alert(&card->pdev->dev, "%s returned %u\n", msg, ret); |
| ret = -EIO; |
| } |
| return ret; |
| } |
| |
| int softing_bootloader_command(struct softing *card, int16_t cmd, |
| const char *msg) |
| { |
| int ret; |
| unsigned long stamp; |
| |
| iowrite16(RES_NONE, &card->dpram[DPRAM_RECEIPT]); |
| iowrite16(cmd, &card->dpram[DPRAM_COMMAND]); |
| /* be sure to flush this to the card */ |
| wmb(); |
| stamp = jiffies + 3 * HZ; |
| /* wait for card */ |
| do { |
| ret = ioread16(&card->dpram[DPRAM_RECEIPT]); |
| /* don't have any cached variables */ |
| rmb(); |
| if (ret == RES_OK) |
| return 0; |
| if (time_after(jiffies, stamp)) |
| break; |
| /* process context => relax */ |
| usleep_range(500, 10000); |
| } while (!signal_pending(current)); |
| |
| ret = (ret == RES_NONE) ? -ETIMEDOUT : -ECANCELED; |
| dev_alert(&card->pdev->dev, "bootloader %s failed (%i)\n", msg, ret); |
| return ret; |
| } |
| |
| static int fw_parse(const uint8_t **pmem, uint16_t *ptype, uint32_t *paddr, |
| uint16_t *plen, const uint8_t **pdat) |
| { |
| uint16_t checksum[2]; |
| const uint8_t *mem; |
| const uint8_t *end; |
| |
| /* |
| * firmware records are a binary, unaligned stream composed of: |
| * uint16_t type; |
| * uint32_t addr; |
| * uint16_t len; |
| * uint8_t dat[len]; |
| * uint16_t checksum; |
| * all values in little endian. |
| * We could define a struct for this, with __attribute__((packed)), |
| * but would that solve the alignment in _all_ cases (cfr. the |
| * struct itself may be an odd address)? |
| * |
| * I chose to use leXX_to_cpup() since this solves both |
| * endianness & alignment. |
| */ |
| mem = *pmem; |
| *ptype = le16_to_cpup((void *)&mem[0]); |
| *paddr = le32_to_cpup((void *)&mem[2]); |
| *plen = le16_to_cpup((void *)&mem[6]); |
| *pdat = &mem[8]; |
| /* verify checksum */ |
| end = &mem[8 + *plen]; |
| checksum[0] = le16_to_cpup((void *)end); |
| for (checksum[1] = 0; mem < end; ++mem) |
| checksum[1] += *mem; |
| if (checksum[0] != checksum[1]) |
| return -EINVAL; |
| /* increment */ |
| *pmem += 10 + *plen; |
| return 0; |
| } |
| |
| int softing_load_fw(const char *file, struct softing *card, |
| __iomem uint8_t *dpram, unsigned int size, int offset) |
| { |
| const struct firmware *fw; |
| int ret; |
| const uint8_t *mem, *end, *dat; |
| uint16_t type, len; |
| uint32_t addr; |
| uint8_t *buf = NULL, *new_buf; |
| int buflen = 0; |
| int8_t type_end = 0; |
| |
| ret = request_firmware(&fw, file, &card->pdev->dev); |
| if (ret < 0) |
| return ret; |
| dev_dbg(&card->pdev->dev, "%s, firmware(%s) got %u bytes" |
| ", offset %c0x%04x\n", |
| card->pdat->name, file, (unsigned int)fw->size, |
| (offset >= 0) ? '+' : '-', (unsigned int)abs(offset)); |
| /* parse the firmware */ |
| mem = fw->data; |
| end = &mem[fw->size]; |
| /* look for header record */ |
| ret = fw_parse(&mem, &type, &addr, &len, &dat); |
| if (ret < 0) |
| goto failed; |
| if (type != 0xffff) |
| goto failed; |
| if (strncmp("Structured Binary Format, Softing GmbH" , dat, len)) { |
| ret = -EINVAL; |
| goto failed; |
| } |
| /* ok, we had a header */ |
| while (mem < end) { |
| ret = fw_parse(&mem, &type, &addr, &len, &dat); |
| if (ret < 0) |
| goto failed; |
| if (type == 3) { |
| /* start address, not used here */ |
| continue; |
| } else if (type == 1) { |
| /* eof */ |
| type_end = 1; |
| break; |
| } else if (type != 0) { |
| ret = -EINVAL; |
| goto failed; |
| } |
| |
| if ((addr + len + offset) > size) |
| goto failed; |
| memcpy_toio(&dpram[addr + offset], dat, len); |
| /* be sure to flush caches from IO space */ |
| mb(); |
| if (len > buflen) { |
| /* align buflen */ |
| buflen = (len + (1024-1)) & ~(1024-1); |
| new_buf = krealloc(buf, buflen, GFP_KERNEL); |
| if (!new_buf) { |
| ret = -ENOMEM; |
| goto failed; |
| } |
| buf = new_buf; |
| } |
| /* verify record data */ |
| memcpy_fromio(buf, &dpram[addr + offset], len); |
| if (memcmp(buf, dat, len)) { |
| /* is not ok */ |
| dev_alert(&card->pdev->dev, "DPRAM readback failed\n"); |
| ret = -EIO; |
| goto failed; |
| } |
| } |
| if (!type_end) |
| /* no end record seen */ |
| goto failed; |
| ret = 0; |
| failed: |
| kfree(buf); |
| release_firmware(fw); |
| if (ret < 0) |
| dev_info(&card->pdev->dev, "firmware %s failed\n", file); |
| return ret; |
| } |
| |
| int softing_load_app_fw(const char *file, struct softing *card) |
| { |
| const struct firmware *fw; |
| const uint8_t *mem, *end, *dat; |
| int ret, j; |
| uint16_t type, len; |
| uint32_t addr, start_addr = 0; |
| unsigned int sum, rx_sum; |
| int8_t type_end = 0, type_entrypoint = 0; |
| |
| ret = request_firmware(&fw, file, &card->pdev->dev); |
| if (ret) { |
| dev_alert(&card->pdev->dev, "request_firmware(%s) got %i\n", |
| file, ret); |
| return ret; |
| } |
| dev_dbg(&card->pdev->dev, "firmware(%s) got %lu bytes\n", |
| file, (unsigned long)fw->size); |
| /* parse the firmware */ |
| mem = fw->data; |
| end = &mem[fw->size]; |
| /* look for header record */ |
| ret = fw_parse(&mem, &type, &addr, &len, &dat); |
| if (ret) |
| goto failed; |
| ret = -EINVAL; |
| if (type != 0xffff) { |
| dev_alert(&card->pdev->dev, "firmware starts with type 0x%x\n", |
| type); |
| goto failed; |
| } |
| if (strncmp("Structured Binary Format, Softing GmbH", dat, len)) { |
| dev_alert(&card->pdev->dev, "firmware string '%.*s' fault\n", |
| len, dat); |
| goto failed; |
| } |
| /* ok, we had a header */ |
| while (mem < end) { |
| ret = fw_parse(&mem, &type, &addr, &len, &dat); |
| if (ret) |
| goto failed; |
| |
| if (type == 3) { |
| /* start address */ |
| start_addr = addr; |
| type_entrypoint = 1; |
| continue; |
| } else if (type == 1) { |
| /* eof */ |
| type_end = 1; |
| break; |
| } else if (type != 0) { |
| dev_alert(&card->pdev->dev, |
| "unknown record type 0x%04x\n", type); |
| ret = -EINVAL; |
| goto failed; |
| } |
| |
| /* regualar data */ |
| for (sum = 0, j = 0; j < len; ++j) |
| sum += dat[j]; |
| /* work in 16bit (target) */ |
| sum &= 0xffff; |
| |
| memcpy_toio(&card->dpram[card->pdat->app.offs], dat, len); |
| iowrite32(card->pdat->app.offs + card->pdat->app.addr, |
| &card->dpram[DPRAM_COMMAND + 2]); |
| iowrite32(addr, &card->dpram[DPRAM_COMMAND + 6]); |
| iowrite16(len, &card->dpram[DPRAM_COMMAND + 10]); |
| iowrite8(1, &card->dpram[DPRAM_COMMAND + 12]); |
| ret = softing_bootloader_command(card, 1, "loading app."); |
| if (ret < 0) |
| goto failed; |
| /* verify checksum */ |
| rx_sum = ioread16(&card->dpram[DPRAM_RECEIPT + 2]); |
| if (rx_sum != sum) { |
| dev_alert(&card->pdev->dev, "SRAM seems to be damaged" |
| ", wanted 0x%04x, got 0x%04x\n", sum, rx_sum); |
| ret = -EIO; |
| goto failed; |
| } |
| } |
| if (!type_end || !type_entrypoint) |
| goto failed; |
| /* start application in card */ |
| iowrite32(start_addr, &card->dpram[DPRAM_COMMAND + 2]); |
| iowrite8(1, &card->dpram[DPRAM_COMMAND + 6]); |
| ret = softing_bootloader_command(card, 3, "start app."); |
| if (ret < 0) |
| goto failed; |
| ret = 0; |
| failed: |
| release_firmware(fw); |
| if (ret < 0) |
| dev_info(&card->pdev->dev, "firmware %s failed\n", file); |
| return ret; |
| } |
| |
| static int softing_reset_chip(struct softing *card) |
| { |
| int ret; |
| |
| do { |
| /* reset chip */ |
| iowrite8(0, &card->dpram[DPRAM_RESET_RX_FIFO]); |
| iowrite8(0, &card->dpram[DPRAM_RESET_RX_FIFO+1]); |
| iowrite8(1, &card->dpram[DPRAM_RESET]); |
| iowrite8(0, &card->dpram[DPRAM_RESET+1]); |
| |
| ret = softing_fct_cmd(card, 0, "reset_can"); |
| if (!ret) |
| break; |
| if (signal_pending(current)) |
| /* don't wait any longer */ |
| break; |
| } while (1); |
| card->tx.pending = 0; |
| return ret; |
| } |
| |
| int softing_chip_poweron(struct softing *card) |
| { |
| int ret; |
| /* sync */ |
| ret = _softing_fct_cmd(card, 99, 0x55, "sync-a"); |
| if (ret < 0) |
| goto failed; |
| |
| ret = _softing_fct_cmd(card, 99, 0xaa, "sync-b"); |
| if (ret < 0) |
| goto failed; |
| |
| ret = softing_reset_chip(card); |
| if (ret < 0) |
| goto failed; |
| /* get_serial */ |
| ret = softing_fct_cmd(card, 43, "get_serial_number"); |
| if (ret < 0) |
| goto failed; |
| card->id.serial = ioread32(&card->dpram[DPRAM_FCT_PARAM]); |
| /* get_version */ |
| ret = softing_fct_cmd(card, 12, "get_version"); |
| if (ret < 0) |
| goto failed; |
| card->id.fw_version = ioread16(&card->dpram[DPRAM_FCT_PARAM + 2]); |
| card->id.hw_version = ioread16(&card->dpram[DPRAM_FCT_PARAM + 4]); |
| card->id.license = ioread16(&card->dpram[DPRAM_FCT_PARAM + 6]); |
| card->id.chip[0] = ioread16(&card->dpram[DPRAM_FCT_PARAM + 8]); |
| card->id.chip[1] = ioread16(&card->dpram[DPRAM_FCT_PARAM + 10]); |
| return 0; |
| failed: |
| return ret; |
| } |
| |
| static void softing_initialize_timestamp(struct softing *card) |
| { |
| uint64_t ovf; |
| |
| card->ts_ref = ktime_get(); |
| |
| /* 16MHz is the reference */ |
| ovf = 0x100000000ULL * 16; |
| do_div(ovf, card->pdat->freq ?: 16); |
| |
| card->ts_overflow = ktime_add_us(0, ovf); |
| } |
| |
| ktime_t softing_raw2ktime(struct softing *card, u32 raw) |
| { |
| uint64_t rawl; |
| ktime_t now, real_offset; |
| ktime_t target; |
| ktime_t tmp; |
| |
| now = ktime_get(); |
| real_offset = ktime_sub(ktime_get_real(), now); |
| |
| /* find nsec from card */ |
| rawl = raw * 16; |
| do_div(rawl, card->pdat->freq ?: 16); |
| target = ktime_add_us(card->ts_ref, rawl); |
| /* test for overflows */ |
| tmp = ktime_add(target, card->ts_overflow); |
| while (unlikely(ktime_to_ns(tmp) > ktime_to_ns(now))) { |
| card->ts_ref = ktime_add(card->ts_ref, card->ts_overflow); |
| target = tmp; |
| tmp = ktime_add(target, card->ts_overflow); |
| } |
| return ktime_add(target, real_offset); |
| } |
| |
| static inline int softing_error_reporting(struct net_device *netdev) |
| { |
| struct softing_priv *priv = netdev_priv(netdev); |
| |
| return (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) |
| ? 1 : 0; |
| } |
| |
| int softing_startstop(struct net_device *dev, int up) |
| { |
| int ret; |
| struct softing *card; |
| struct softing_priv *priv; |
| struct net_device *netdev; |
| int bus_bitmask_start; |
| int j, error_reporting; |
| struct can_frame msg; |
| const struct can_bittiming *bt; |
| |
| priv = netdev_priv(dev); |
| card = priv->card; |
| |
| if (!card->fw.up) |
| return -EIO; |
| |
| ret = mutex_lock_interruptible(&card->fw.lock); |
| if (ret) |
| return ret; |
| |
| bus_bitmask_start = 0; |
| if (dev && up) |
| /* prepare to start this bus as well */ |
| bus_bitmask_start |= (1 << priv->index); |
| /* bring netdevs down */ |
| for (j = 0; j < ARRAY_SIZE(card->net); ++j) { |
| netdev = card->net[j]; |
| if (!netdev) |
| continue; |
| priv = netdev_priv(netdev); |
| |
| if (dev != netdev) |
| netif_stop_queue(netdev); |
| |
| if (netif_running(netdev)) { |
| if (dev != netdev) |
| bus_bitmask_start |= (1 << j); |
| priv->tx.pending = 0; |
| priv->tx.echo_put = 0; |
| priv->tx.echo_get = 0; |
| /* |
| * this bus' may just have called open_candev() |
| * which is rather stupid to call close_candev() |
| * already |
| * but we may come here from busoff recovery too |
| * in which case the echo_skb _needs_ flushing too. |
| * just be sure to call open_candev() again |
| */ |
| close_candev(netdev); |
| } |
| priv->can.state = CAN_STATE_STOPPED; |
| } |
| card->tx.pending = 0; |
| |
| softing_enable_irq(card, 0); |
| ret = softing_reset_chip(card); |
| if (ret) |
| goto failed; |
| if (!bus_bitmask_start) |
| /* no busses to be brought up */ |
| goto card_done; |
| |
| if ((bus_bitmask_start & 1) && (bus_bitmask_start & 2) |
| && (softing_error_reporting(card->net[0]) |
| != softing_error_reporting(card->net[1]))) { |
| dev_alert(&card->pdev->dev, |
| "err_reporting flag differs for busses\n"); |
| goto invalid; |
| } |
| error_reporting = 0; |
| if (bus_bitmask_start & 1) { |
| netdev = card->net[0]; |
| priv = netdev_priv(netdev); |
| error_reporting += softing_error_reporting(netdev); |
| /* init chip 1 */ |
| bt = &priv->can.bittiming; |
| iowrite16(bt->brp, &card->dpram[DPRAM_FCT_PARAM + 2]); |
| iowrite16(bt->sjw, &card->dpram[DPRAM_FCT_PARAM + 4]); |
| iowrite16(bt->phase_seg1 + bt->prop_seg, |
| &card->dpram[DPRAM_FCT_PARAM + 6]); |
| iowrite16(bt->phase_seg2, &card->dpram[DPRAM_FCT_PARAM + 8]); |
| iowrite16((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) ? 1 : 0, |
| &card->dpram[DPRAM_FCT_PARAM + 10]); |
| ret = softing_fct_cmd(card, 1, "initialize_chip[0]"); |
| if (ret < 0) |
| goto failed; |
| /* set mode */ |
| iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 2]); |
| iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 4]); |
| ret = softing_fct_cmd(card, 3, "set_mode[0]"); |
| if (ret < 0) |
| goto failed; |
| /* set filter */ |
| /* 11bit id & mask */ |
| iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 2]); |
| iowrite16(0x07ff, &card->dpram[DPRAM_FCT_PARAM + 4]); |
| /* 29bit id.lo & mask.lo & id.hi & mask.hi */ |
| iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 6]); |
| iowrite16(0xffff, &card->dpram[DPRAM_FCT_PARAM + 8]); |
| iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 10]); |
| iowrite16(0x1fff, &card->dpram[DPRAM_FCT_PARAM + 12]); |
| ret = softing_fct_cmd(card, 7, "set_filter[0]"); |
| if (ret < 0) |
| goto failed; |
| /* set output control */ |
| iowrite16(priv->output, &card->dpram[DPRAM_FCT_PARAM + 2]); |
| ret = softing_fct_cmd(card, 5, "set_output[0]"); |
| if (ret < 0) |
| goto failed; |
| } |
| if (bus_bitmask_start & 2) { |
| netdev = card->net[1]; |
| priv = netdev_priv(netdev); |
| error_reporting += softing_error_reporting(netdev); |
| /* init chip2 */ |
| bt = &priv->can.bittiming; |
| iowrite16(bt->brp, &card->dpram[DPRAM_FCT_PARAM + 2]); |
| iowrite16(bt->sjw, &card->dpram[DPRAM_FCT_PARAM + 4]); |
| iowrite16(bt->phase_seg1 + bt->prop_seg, |
| &card->dpram[DPRAM_FCT_PARAM + 6]); |
| iowrite16(bt->phase_seg2, &card->dpram[DPRAM_FCT_PARAM + 8]); |
| iowrite16((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) ? 1 : 0, |
| &card->dpram[DPRAM_FCT_PARAM + 10]); |
| ret = softing_fct_cmd(card, 2, "initialize_chip[1]"); |
| if (ret < 0) |
| goto failed; |
| /* set mode2 */ |
| iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 2]); |
| iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 4]); |
| ret = softing_fct_cmd(card, 4, "set_mode[1]"); |
| if (ret < 0) |
| goto failed; |
| /* set filter2 */ |
| /* 11bit id & mask */ |
| iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 2]); |
| iowrite16(0x07ff, &card->dpram[DPRAM_FCT_PARAM + 4]); |
| /* 29bit id.lo & mask.lo & id.hi & mask.hi */ |
| iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 6]); |
| iowrite16(0xffff, &card->dpram[DPRAM_FCT_PARAM + 8]); |
| iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 10]); |
| iowrite16(0x1fff, &card->dpram[DPRAM_FCT_PARAM + 12]); |
| ret = softing_fct_cmd(card, 8, "set_filter[1]"); |
| if (ret < 0) |
| goto failed; |
| /* set output control2 */ |
| iowrite16(priv->output, &card->dpram[DPRAM_FCT_PARAM + 2]); |
| ret = softing_fct_cmd(card, 6, "set_output[1]"); |
| if (ret < 0) |
| goto failed; |
| } |
| |
| /* enable_error_frame |
| * |
| * Error reporting is switched off at the moment since |
| * the receiving of them is not yet 100% verified |
| * This should be enabled sooner or later |
| */ |
| if (0 && error_reporting) { |
| ret = softing_fct_cmd(card, 51, "enable_error_frame"); |
| if (ret < 0) |
| goto failed; |
| } |
| |
| /* initialize interface */ |
| iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 2]); |
| iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 4]); |
| iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 6]); |
| iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 8]); |
| iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 10]); |
| iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 12]); |
| iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 14]); |
| iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 16]); |
| iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 18]); |
| iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 20]); |
| ret = softing_fct_cmd(card, 17, "initialize_interface"); |
| if (ret < 0) |
| goto failed; |
| /* enable_fifo */ |
| ret = softing_fct_cmd(card, 36, "enable_fifo"); |
| if (ret < 0) |
| goto failed; |
| /* enable fifo tx ack */ |
| ret = softing_fct_cmd(card, 13, "fifo_tx_ack[0]"); |
| if (ret < 0) |
| goto failed; |
| /* enable fifo tx ack2 */ |
| ret = softing_fct_cmd(card, 14, "fifo_tx_ack[1]"); |
| if (ret < 0) |
| goto failed; |
| /* start_chip */ |
| ret = softing_fct_cmd(card, 11, "start_chip"); |
| if (ret < 0) |
| goto failed; |
| iowrite8(0, &card->dpram[DPRAM_INFO_BUSSTATE]); |
| iowrite8(0, &card->dpram[DPRAM_INFO_BUSSTATE2]); |
| if (card->pdat->generation < 2) { |
| iowrite8(0, &card->dpram[DPRAM_V2_IRQ_TOHOST]); |
| /* flush the DPRAM caches */ |
| wmb(); |
| } |
| |
| softing_initialize_timestamp(card); |
| |
| /* |
| * do socketcan notifications/status changes |
| * from here, no errors should occur, or the failed: part |
| * must be reviewed |
| */ |
| memset(&msg, 0, sizeof(msg)); |
| msg.can_id = CAN_ERR_FLAG | CAN_ERR_RESTARTED; |
| msg.can_dlc = CAN_ERR_DLC; |
| for (j = 0; j < ARRAY_SIZE(card->net); ++j) { |
| if (!(bus_bitmask_start & (1 << j))) |
| continue; |
| netdev = card->net[j]; |
| if (!netdev) |
| continue; |
| priv = netdev_priv(netdev); |
| priv->can.state = CAN_STATE_ERROR_ACTIVE; |
| open_candev(netdev); |
| if (dev != netdev) { |
| /* notify other busses on the restart */ |
| softing_netdev_rx(netdev, &msg, 0); |
| ++priv->can.can_stats.restarts; |
| } |
| netif_wake_queue(netdev); |
| } |
| |
| /* enable interrupts */ |
| ret = softing_enable_irq(card, 1); |
| if (ret) |
| goto failed; |
| card_done: |
| mutex_unlock(&card->fw.lock); |
| return 0; |
| invalid: |
| ret = -EINVAL; |
| failed: |
| softing_enable_irq(card, 0); |
| softing_reset_chip(card); |
| mutex_unlock(&card->fw.lock); |
| /* bring all other interfaces down */ |
| for (j = 0; j < ARRAY_SIZE(card->net); ++j) { |
| netdev = card->net[j]; |
| if (!netdev) |
| continue; |
| dev_close(netdev); |
| } |
| return ret; |
| } |
| |
| int softing_default_output(struct net_device *netdev) |
| { |
| struct softing_priv *priv = netdev_priv(netdev); |
| struct softing *card = priv->card; |
| |
| switch (priv->chip) { |
| case 1000: |
| return (card->pdat->generation < 2) ? 0xfb : 0xfa; |
| case 5: |
| return 0x60; |
| default: |
| return 0x40; |
| } |
| } |