| /* |
| * drivers/i2c/busses/i2c-rcar.c |
| * |
| * Copyright (C) 2012 Renesas Solutions Corp. |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| * |
| * This file is based on the drivers/i2c/busses/i2c-sh7760.c |
| * (c) 2005-2008 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com> |
| * |
| * This file used out-of-tree driver i2c-rcar.c |
| * Copyright (C) 2011-2012 Renesas Electronics Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c/i2c-rcar.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| |
| /* register offsets */ |
| #define ICSCR 0x00 /* slave ctrl */ |
| #define ICMCR 0x04 /* master ctrl */ |
| #define ICSSR 0x08 /* slave status */ |
| #define ICMSR 0x0C /* master status */ |
| #define ICSIER 0x10 /* slave irq enable */ |
| #define ICMIER 0x14 /* master irq enable */ |
| #define ICCCR 0x18 /* clock dividers */ |
| #define ICSAR 0x1C /* slave address */ |
| #define ICMAR 0x20 /* master address */ |
| #define ICRXTX 0x24 /* data port */ |
| |
| /* ICMCR */ |
| #define MDBS (1 << 7) /* non-fifo mode switch */ |
| #define FSCL (1 << 6) /* override SCL pin */ |
| #define FSDA (1 << 5) /* override SDA pin */ |
| #define OBPC (1 << 4) /* override pins */ |
| #define MIE (1 << 3) /* master if enable */ |
| #define TSBE (1 << 2) |
| #define FSB (1 << 1) /* force stop bit */ |
| #define ESG (1 << 0) /* en startbit gen */ |
| |
| /* ICMSR */ |
| #define MNR (1 << 6) /* nack received */ |
| #define MAL (1 << 5) /* arbitration lost */ |
| #define MST (1 << 4) /* sent a stop */ |
| #define MDE (1 << 3) |
| #define MDT (1 << 2) |
| #define MDR (1 << 1) |
| #define MAT (1 << 0) /* slave addr xfer done */ |
| |
| /* ICMIE */ |
| #define MNRE (1 << 6) /* nack irq en */ |
| #define MALE (1 << 5) /* arblos irq en */ |
| #define MSTE (1 << 4) /* stop irq en */ |
| #define MDEE (1 << 3) |
| #define MDTE (1 << 2) |
| #define MDRE (1 << 1) |
| #define MATE (1 << 0) /* address sent irq en */ |
| |
| |
| enum { |
| RCAR_BUS_PHASE_ADDR, |
| RCAR_BUS_PHASE_DATA, |
| RCAR_BUS_PHASE_STOP, |
| }; |
| |
| enum { |
| RCAR_IRQ_CLOSE, |
| RCAR_IRQ_OPEN_FOR_SEND, |
| RCAR_IRQ_OPEN_FOR_RECV, |
| RCAR_IRQ_OPEN_FOR_STOP, |
| }; |
| |
| /* |
| * flags |
| */ |
| #define ID_LAST_MSG (1 << 0) |
| #define ID_IOERROR (1 << 1) |
| #define ID_DONE (1 << 2) |
| #define ID_ARBLOST (1 << 3) |
| #define ID_NACK (1 << 4) |
| |
| struct rcar_i2c_priv { |
| void __iomem *io; |
| struct i2c_adapter adap; |
| struct i2c_msg *msg; |
| |
| spinlock_t lock; |
| wait_queue_head_t wait; |
| |
| int pos; |
| int irq; |
| u32 icccr; |
| u32 flags; |
| }; |
| |
| #define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent) |
| #define rcar_i2c_is_recv(p) ((p)->msg->flags & I2C_M_RD) |
| |
| #define rcar_i2c_flags_set(p, f) ((p)->flags |= (f)) |
| #define rcar_i2c_flags_has(p, f) ((p)->flags & (f)) |
| |
| #define LOOP_TIMEOUT 1024 |
| |
| /* |
| * basic functions |
| */ |
| static void rcar_i2c_write(struct rcar_i2c_priv *priv, int reg, u32 val) |
| { |
| writel(val, priv->io + reg); |
| } |
| |
| static u32 rcar_i2c_read(struct rcar_i2c_priv *priv, int reg) |
| { |
| return readl(priv->io + reg); |
| } |
| |
| static void rcar_i2c_init(struct rcar_i2c_priv *priv) |
| { |
| /* |
| * reset slave mode. |
| * slave mode is not used on this driver |
| */ |
| rcar_i2c_write(priv, ICSIER, 0); |
| rcar_i2c_write(priv, ICSAR, 0); |
| rcar_i2c_write(priv, ICSCR, 0); |
| rcar_i2c_write(priv, ICSSR, 0); |
| |
| /* reset master mode */ |
| rcar_i2c_write(priv, ICMIER, 0); |
| rcar_i2c_write(priv, ICMCR, 0); |
| rcar_i2c_write(priv, ICMSR, 0); |
| rcar_i2c_write(priv, ICMAR, 0); |
| } |
| |
| static void rcar_i2c_irq_mask(struct rcar_i2c_priv *priv, int open) |
| { |
| u32 val = MNRE | MALE | MSTE | MATE; /* default */ |
| |
| switch (open) { |
| case RCAR_IRQ_OPEN_FOR_SEND: |
| val |= MDEE; /* default + send */ |
| break; |
| case RCAR_IRQ_OPEN_FOR_RECV: |
| val |= MDRE; /* default + read */ |
| break; |
| case RCAR_IRQ_OPEN_FOR_STOP: |
| val = MSTE; /* stop irq only */ |
| break; |
| case RCAR_IRQ_CLOSE: |
| default: |
| val = 0; /* all close */ |
| break; |
| } |
| rcar_i2c_write(priv, ICMIER, val); |
| } |
| |
| static void rcar_i2c_set_addr(struct rcar_i2c_priv *priv, u32 recv) |
| { |
| rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | recv); |
| } |
| |
| /* |
| * bus control functions |
| */ |
| static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) |
| { |
| int i; |
| |
| for (i = 0; i < LOOP_TIMEOUT; i++) { |
| /* make sure that bus is not busy */ |
| if (!(rcar_i2c_read(priv, ICMCR) & FSDA)) |
| return 0; |
| udelay(1); |
| } |
| |
| return -EBUSY; |
| } |
| |
| static void rcar_i2c_bus_phase(struct rcar_i2c_priv *priv, int phase) |
| { |
| switch (phase) { |
| case RCAR_BUS_PHASE_ADDR: |
| rcar_i2c_write(priv, ICMCR, MDBS | MIE | ESG); |
| break; |
| case RCAR_BUS_PHASE_DATA: |
| rcar_i2c_write(priv, ICMCR, MDBS | MIE); |
| break; |
| case RCAR_BUS_PHASE_STOP: |
| rcar_i2c_write(priv, ICMCR, MDBS | MIE | FSB); |
| break; |
| } |
| } |
| |
| /* |
| * clock function |
| */ |
| static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, |
| u32 bus_speed, |
| struct device *dev) |
| { |
| struct clk *clkp = clk_get(NULL, "peripheral_clk"); |
| u32 scgd, cdf; |
| u32 round, ick; |
| u32 scl; |
| |
| if (!clkp) { |
| dev_err(dev, "there is no peripheral_clk\n"); |
| return -EIO; |
| } |
| |
| /* |
| * calculate SCL clock |
| * see |
| * ICCCR |
| * |
| * ick = clkp / (1 + CDF) |
| * SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick]) |
| * |
| * ick : I2C internal clock < 20 MHz |
| * ticf : I2C SCL falling time = 35 ns here |
| * tr : I2C SCL rising time = 200 ns here |
| * intd : LSI internal delay = 50 ns here |
| * clkp : peripheral_clk |
| * F[] : integer up-valuation |
| */ |
| for (cdf = 0; cdf < 4; cdf++) { |
| ick = clk_get_rate(clkp) / (1 + cdf); |
| if (ick < 20000000) |
| goto ick_find; |
| } |
| dev_err(dev, "there is no best CDF\n"); |
| return -EIO; |
| |
| ick_find: |
| /* |
| * it is impossible to calculate large scale |
| * number on u32. separate it |
| * |
| * F[(ticf + tr + intd) * ick] |
| * = F[(35 + 200 + 50)ns * ick] |
| * = F[285 * ick / 1000000000] |
| * = F[(ick / 1000000) * 285 / 1000] |
| */ |
| round = (ick + 500000) / 1000000 * 285; |
| round = (round + 500) / 1000; |
| |
| /* |
| * SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick]) |
| * |
| * Calculation result (= SCL) should be less than |
| * bus_speed for hardware safety |
| */ |
| for (scgd = 0; scgd < 0x40; scgd++) { |
| scl = ick / (20 + (scgd * 8) + round); |
| if (scl <= bus_speed) |
| goto scgd_find; |
| } |
| dev_err(dev, "it is impossible to calculate best SCL\n"); |
| return -EIO; |
| |
| scgd_find: |
| dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n", |
| scl, bus_speed, clk_get_rate(clkp), round, cdf, scgd); |
| |
| /* |
| * keep icccr value |
| */ |
| priv->icccr = (scgd << 2 | cdf); |
| |
| return 0; |
| } |
| |
| static void rcar_i2c_clock_start(struct rcar_i2c_priv *priv) |
| { |
| rcar_i2c_write(priv, ICCCR, priv->icccr); |
| } |
| |
| /* |
| * status functions |
| */ |
| static u32 rcar_i2c_status_get(struct rcar_i2c_priv *priv) |
| { |
| return rcar_i2c_read(priv, ICMSR); |
| } |
| |
| #define rcar_i2c_status_clear(priv) rcar_i2c_status_bit_clear(priv, 0xffffffff) |
| static void rcar_i2c_status_bit_clear(struct rcar_i2c_priv *priv, u32 bit) |
| { |
| rcar_i2c_write(priv, ICMSR, ~bit); |
| } |
| |
| /* |
| * recv/send functions |
| */ |
| static int rcar_i2c_recv(struct rcar_i2c_priv *priv) |
| { |
| rcar_i2c_set_addr(priv, 1); |
| rcar_i2c_status_clear(priv); |
| rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_ADDR); |
| rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_RECV); |
| |
| return 0; |
| } |
| |
| static int rcar_i2c_send(struct rcar_i2c_priv *priv) |
| { |
| int ret; |
| |
| /* |
| * It should check bus status when send case |
| */ |
| ret = rcar_i2c_bus_barrier(priv); |
| if (ret < 0) |
| return ret; |
| |
| rcar_i2c_set_addr(priv, 0); |
| rcar_i2c_status_clear(priv); |
| rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_ADDR); |
| rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_SEND); |
| |
| return 0; |
| } |
| |
| #define rcar_i2c_send_restart(priv) rcar_i2c_status_bit_clear(priv, (MAT | MDE)) |
| #define rcar_i2c_recv_restart(priv) rcar_i2c_status_bit_clear(priv, (MAT | MDR)) |
| |
| /* |
| * interrupt functions |
| */ |
| static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr) |
| { |
| struct i2c_msg *msg = priv->msg; |
| |
| /* |
| * FIXME |
| * sometimes, unknown interrupt happened. |
| * Do nothing |
| */ |
| if (!(msr & MDE)) |
| return 0; |
| |
| /* |
| * If address transfer phase finished, |
| * goto data phase. |
| */ |
| if (msr & MAT) |
| rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_DATA); |
| |
| if (priv->pos < msg->len) { |
| /* |
| * Prepare next data to ICRXTX register. |
| * This data will go to _SHIFT_ register. |
| * |
| * * |
| * [ICRXTX] -> [SHIFT] -> [I2C bus] |
| */ |
| rcar_i2c_write(priv, ICRXTX, msg->buf[priv->pos]); |
| priv->pos++; |
| |
| } else { |
| /* |
| * The last data was pushed to ICRXTX on _PREV_ empty irq. |
| * It is on _SHIFT_ register, and will sent to I2C bus. |
| * |
| * * |
| * [ICRXTX] -> [SHIFT] -> [I2C bus] |
| */ |
| |
| if (priv->flags & ID_LAST_MSG) |
| /* |
| * If current msg is the _LAST_ msg, |
| * prepare stop condition here. |
| * ID_DONE will be set on STOP irq. |
| */ |
| rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP); |
| else |
| /* |
| * If current msg is _NOT_ last msg, |
| * it doesn't call stop phase. |
| * thus, there is no STOP irq. |
| * return ID_DONE here. |
| */ |
| return ID_DONE; |
| } |
| |
| rcar_i2c_send_restart(priv); |
| |
| return 0; |
| } |
| |
| static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr) |
| { |
| struct i2c_msg *msg = priv->msg; |
| |
| /* |
| * FIXME |
| * sometimes, unknown interrupt happened. |
| * Do nothing |
| */ |
| if (!(msr & MDR)) |
| return 0; |
| |
| if (msr & MAT) { |
| /* |
| * Address transfer phase finished, |
| * but, there is no data at this point. |
| * Do nothing. |
| */ |
| } else if (priv->pos < msg->len) { |
| /* |
| * get received data |
| */ |
| msg->buf[priv->pos] = rcar_i2c_read(priv, ICRXTX); |
| priv->pos++; |
| } |
| |
| /* |
| * If next received data is the _LAST_, |
| * go to STOP phase, |
| * otherwise, go to DATA phase. |
| */ |
| if (priv->pos + 1 >= msg->len) |
| rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP); |
| else |
| rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_DATA); |
| |
| rcar_i2c_recv_restart(priv); |
| |
| return 0; |
| } |
| |
| static irqreturn_t rcar_i2c_irq(int irq, void *ptr) |
| { |
| struct rcar_i2c_priv *priv = ptr; |
| struct device *dev = rcar_i2c_priv_to_dev(priv); |
| u32 msr; |
| |
| /*-------------- spin lock -----------------*/ |
| spin_lock(&priv->lock); |
| |
| msr = rcar_i2c_status_get(priv); |
| |
| /* |
| * Arbitration lost |
| */ |
| if (msr & MAL) { |
| /* |
| * CAUTION |
| * |
| * When arbitration lost, device become _slave_ mode. |
| */ |
| dev_dbg(dev, "Arbitration Lost\n"); |
| rcar_i2c_flags_set(priv, (ID_DONE | ID_ARBLOST)); |
| goto out; |
| } |
| |
| /* |
| * Stop |
| */ |
| if (msr & MST) { |
| dev_dbg(dev, "Stop\n"); |
| rcar_i2c_flags_set(priv, ID_DONE); |
| goto out; |
| } |
| |
| /* |
| * Nack |
| */ |
| if (msr & MNR) { |
| dev_dbg(dev, "Nack\n"); |
| |
| /* go to stop phase */ |
| rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP); |
| rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_STOP); |
| rcar_i2c_flags_set(priv, ID_NACK); |
| goto out; |
| } |
| |
| /* |
| * recv/send |
| */ |
| if (rcar_i2c_is_recv(priv)) |
| rcar_i2c_flags_set(priv, rcar_i2c_irq_recv(priv, msr)); |
| else |
| rcar_i2c_flags_set(priv, rcar_i2c_irq_send(priv, msr)); |
| |
| out: |
| if (rcar_i2c_flags_has(priv, ID_DONE)) { |
| rcar_i2c_irq_mask(priv, RCAR_IRQ_CLOSE); |
| rcar_i2c_status_clear(priv); |
| wake_up(&priv->wait); |
| } |
| |
| spin_unlock(&priv->lock); |
| /*-------------- spin unlock -----------------*/ |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int rcar_i2c_master_xfer(struct i2c_adapter *adap, |
| struct i2c_msg *msgs, |
| int num) |
| { |
| struct rcar_i2c_priv *priv = i2c_get_adapdata(adap); |
| struct device *dev = rcar_i2c_priv_to_dev(priv); |
| unsigned long flags; |
| int i, ret, timeout; |
| |
| pm_runtime_get_sync(dev); |
| |
| /*-------------- spin lock -----------------*/ |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| rcar_i2c_init(priv); |
| rcar_i2c_clock_start(priv); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| /*-------------- spin unlock -----------------*/ |
| |
| ret = -EINVAL; |
| for (i = 0; i < num; i++) { |
| /*-------------- spin lock -----------------*/ |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| /* init each data */ |
| priv->msg = &msgs[i]; |
| priv->pos = 0; |
| priv->flags = 0; |
| if (priv->msg == &msgs[num - 1]) |
| rcar_i2c_flags_set(priv, ID_LAST_MSG); |
| |
| /* start send/recv */ |
| if (rcar_i2c_is_recv(priv)) |
| ret = rcar_i2c_recv(priv); |
| else |
| ret = rcar_i2c_send(priv); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| /*-------------- spin unlock -----------------*/ |
| |
| if (ret < 0) |
| break; |
| |
| /* |
| * wait result |
| */ |
| timeout = wait_event_timeout(priv->wait, |
| rcar_i2c_flags_has(priv, ID_DONE), |
| 5 * HZ); |
| if (!timeout) { |
| ret = -ETIMEDOUT; |
| break; |
| } |
| |
| /* |
| * error handling |
| */ |
| if (rcar_i2c_flags_has(priv, ID_NACK)) { |
| ret = -EREMOTEIO; |
| break; |
| } |
| |
| if (rcar_i2c_flags_has(priv, ID_ARBLOST)) { |
| ret = -EAGAIN; |
| break; |
| } |
| |
| if (rcar_i2c_flags_has(priv, ID_IOERROR)) { |
| ret = -EIO; |
| break; |
| } |
| |
| ret = i + 1; /* The number of transfer */ |
| } |
| |
| pm_runtime_put(dev); |
| |
| if (ret < 0) |
| dev_err(dev, "error %d : %x\n", ret, priv->flags); |
| |
| return ret; |
| } |
| |
| static u32 rcar_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static const struct i2c_algorithm rcar_i2c_algo = { |
| .master_xfer = rcar_i2c_master_xfer, |
| .functionality = rcar_i2c_func, |
| }; |
| |
| static int __devinit rcar_i2c_probe(struct platform_device *pdev) |
| { |
| struct i2c_rcar_platform_data *pdata = pdev->dev.platform_data; |
| struct rcar_i2c_priv *priv; |
| struct i2c_adapter *adap; |
| struct resource *res; |
| struct device *dev = &pdev->dev; |
| u32 bus_speed; |
| int ret; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(dev, "no mmio resources\n"); |
| return -ENODEV; |
| } |
| |
| priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL); |
| if (!priv) { |
| dev_err(dev, "no mem for private data\n"); |
| return -ENOMEM; |
| } |
| |
| bus_speed = 100000; /* default 100 kHz */ |
| if (pdata && pdata->bus_speed) |
| bus_speed = pdata->bus_speed; |
| ret = rcar_i2c_clock_calculate(priv, bus_speed, dev); |
| if (ret < 0) |
| return ret; |
| |
| priv->io = devm_ioremap(dev, res->start, resource_size(res)); |
| if (!priv->io) { |
| dev_err(dev, "cannot ioremap\n"); |
| return -ENODEV; |
| } |
| |
| priv->irq = platform_get_irq(pdev, 0); |
| init_waitqueue_head(&priv->wait); |
| spin_lock_init(&priv->lock); |
| |
| adap = &priv->adap; |
| adap->nr = pdev->id; |
| adap->algo = &rcar_i2c_algo; |
| adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; |
| adap->retries = 3; |
| adap->dev.parent = dev; |
| i2c_set_adapdata(adap, priv); |
| strlcpy(adap->name, pdev->name, sizeof(adap->name)); |
| |
| ret = devm_request_irq(dev, priv->irq, rcar_i2c_irq, 0, |
| dev_name(dev), priv); |
| if (ret < 0) { |
| dev_err(dev, "cannot get irq %d\n", priv->irq); |
| return ret; |
| } |
| |
| ret = i2c_add_numbered_adapter(adap); |
| if (ret < 0) { |
| dev_err(dev, "reg adap failed: %d\n", ret); |
| return ret; |
| } |
| |
| pm_runtime_enable(dev); |
| platform_set_drvdata(pdev, priv); |
| |
| dev_info(dev, "probed\n"); |
| |
| return 0; |
| } |
| |
| static int __devexit rcar_i2c_remove(struct platform_device *pdev) |
| { |
| struct rcar_i2c_priv *priv = platform_get_drvdata(pdev); |
| struct device *dev = &pdev->dev; |
| |
| i2c_del_adapter(&priv->adap); |
| pm_runtime_disable(dev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver rcar_i2c_drv = { |
| .driver = { |
| .name = "i2c-rcar", |
| .owner = THIS_MODULE, |
| }, |
| .probe = rcar_i2c_probe, |
| .remove = __devexit_p(rcar_i2c_remove), |
| }; |
| |
| module_platform_driver(rcar_i2c_drv); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Renesas R-Car I2C bus driver"); |
| MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); |