| /* |
| * ASIC Device List Intialization |
| * |
| * Description: Defines the platform resources for the SA settop. |
| * |
| * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| * Author: Ken Eppinett |
| * David Schleef <ds@schleef.org> |
| * |
| * Description: Defines the platform resources for the SA settop. |
| * |
| * NOTE: The bootloader allocates persistent memory at an address which is |
| * 16 MiB below the end of the highest address in KSEG0. All fixed |
| * address memory reservations must avoid this region. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/resource.h> |
| #include <linux/serial_reg.h> |
| #include <linux/io.h> |
| #include <linux/bootmem.h> |
| #include <linux/mm.h> |
| #include <linux/platform_device.h> |
| #include <linux/module.h> |
| #include <asm/page.h> |
| #include <linux/swap.h> |
| #include <linux/highmem.h> |
| #include <linux/dma-mapping.h> |
| |
| #include <asm/mach-powertv/asic.h> |
| #include <asm/mach-powertv/asic_regs.h> |
| #include <asm/mach-powertv/interrupts.h> |
| |
| #ifdef CONFIG_BOOTLOADER_DRIVER |
| #include <asm/mach-powertv/kbldr.h> |
| #endif |
| #include <asm/bootinfo.h> |
| |
| #define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0)) |
| |
| /* |
| * Forward Prototypes |
| */ |
| static void pmem_setup_resource(void); |
| |
| /* |
| * Global Variables |
| */ |
| enum asic_type asic; |
| |
| unsigned int platform_features; |
| unsigned int platform_family; |
| const struct register_map *register_map; |
| EXPORT_SYMBOL(register_map); /* Exported for testing */ |
| unsigned long asic_phy_base; |
| unsigned long asic_base; |
| EXPORT_SYMBOL(asic_base); /* Exported for testing */ |
| struct resource *gp_resources; |
| static bool usb_configured; |
| |
| /* |
| * Don't recommend to use it directly, it is usually used by kernel internally. |
| * Portable code should be using interfaces such as ioremp, dma_map_single, etc. |
| */ |
| unsigned long phys_to_bus_offset; |
| EXPORT_SYMBOL(phys_to_bus_offset); |
| |
| /* |
| * |
| * IO Resource Definition |
| * |
| */ |
| |
| struct resource asic_resource = { |
| .name = "ASIC Resource", |
| .start = 0, |
| .end = ASIC_IO_SIZE, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| /* |
| * |
| * USB Host Resource Definition |
| * |
| */ |
| |
| static struct resource ehci_resources[] = { |
| { |
| .parent = &asic_resource, |
| .start = 0, |
| .end = 0xff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = irq_usbehci, |
| .end = irq_usbehci, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static u64 ehci_dmamask = DMA_BIT_MASK(32); |
| |
| static struct platform_device ehci_device = { |
| .name = "powertv-ehci", |
| .id = 0, |
| .num_resources = 2, |
| .resource = ehci_resources, |
| .dev = { |
| .dma_mask = &ehci_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| }; |
| |
| static struct resource ohci_resources[] = { |
| { |
| .parent = &asic_resource, |
| .start = 0, |
| .end = 0xff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = irq_usbohci, |
| .end = irq_usbohci, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static u64 ohci_dmamask = DMA_BIT_MASK(32); |
| |
| static struct platform_device ohci_device = { |
| .name = "powertv-ohci", |
| .id = 0, |
| .num_resources = 2, |
| .resource = ohci_resources, |
| .dev = { |
| .dma_mask = &ohci_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| }; |
| |
| static struct platform_device *platform_devices[] = { |
| &ehci_device, |
| &ohci_device, |
| }; |
| |
| /* |
| * |
| * Platform Configuration and Device Initialization |
| * |
| */ |
| static void __init fs_update(int pe, int md, int sdiv, int disable_div_by_3) |
| { |
| int en_prg, byp, pwr, nsb, val; |
| int sout; |
| |
| sout = 1; |
| en_prg = 1; |
| byp = 0; |
| nsb = 1; |
| pwr = 1; |
| |
| val = ((sdiv << 29) | (md << 24) | (pe<<8) | (sout<<3) | (byp<<2) | |
| (nsb<<1) | (disable_div_by_3<<5)); |
| |
| asic_write(val, usb_fs); |
| asic_write(val | (en_prg<<4), usb_fs); |
| asic_write(val | (en_prg<<4) | pwr, usb_fs); |
| } |
| |
| /* |
| * Allow override of bootloader-specified model |
| */ |
| static char __initdata cmdline[COMMAND_LINE_SIZE]; |
| |
| #define FORCEFAMILY_PARAM "forcefamily" |
| |
| static __init int check_forcefamily(unsigned char forced_family[2]) |
| { |
| const char *p; |
| |
| forced_family[0] = '\0'; |
| forced_family[1] = '\0'; |
| |
| /* Check the command line for a forcefamily directive */ |
| strncpy(cmdline, arcs_cmdline, COMMAND_LINE_SIZE - 1); |
| p = strstr(cmdline, FORCEFAMILY_PARAM); |
| if (p && (p != cmdline) && (*(p - 1) != ' ')) |
| p = strstr(p, " " FORCEFAMILY_PARAM "="); |
| |
| if (p) { |
| p += strlen(FORCEFAMILY_PARAM "="); |
| |
| if (*p == '\0' || *(p + 1) == '\0' || |
| (*(p + 2) != '\0' && *(p + 2) != ' ')) |
| pr_err(FORCEFAMILY_PARAM " must be exactly two " |
| "characters long, ignoring value\n"); |
| |
| else { |
| forced_family[0] = *p; |
| forced_family[1] = *(p + 1); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * platform_set_family - determine major platform family type. |
| * |
| * Returns family type; -1 if none |
| * Returns the family type; -1 if none |
| * |
| */ |
| static __init noinline void platform_set_family(void) |
| { |
| #define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0)) |
| |
| unsigned char forced_family[2]; |
| unsigned short bootldr_family; |
| |
| check_forcefamily(forced_family); |
| |
| if (forced_family[0] != '\0' && forced_family[1] != '\0') |
| bootldr_family = BOOTLDRFAMILY(forced_family[0], |
| forced_family[1]); |
| else { |
| |
| #ifdef CONFIG_BOOTLOADER_DRIVER |
| bootldr_family = (unsigned short) kbldr_GetSWFamily(); |
| #else |
| #if defined(CONFIG_BOOTLOADER_FAMILY) |
| bootldr_family = (unsigned short) BOOTLDRFAMILY( |
| CONFIG_BOOTLOADER_FAMILY[0], |
| CONFIG_BOOTLOADER_FAMILY[1]); |
| #else |
| #error "Unknown Bootloader Family" |
| #endif |
| #endif |
| } |
| |
| pr_info("Bootloader Family = 0x%04X\n", bootldr_family); |
| |
| switch (bootldr_family) { |
| case BOOTLDRFAMILY('R', '1'): |
| platform_family = FAMILY_1500; |
| break; |
| case BOOTLDRFAMILY('4', '4'): |
| platform_family = FAMILY_4500; |
| break; |
| case BOOTLDRFAMILY('4', '6'): |
| platform_family = FAMILY_4600; |
| break; |
| case BOOTLDRFAMILY('A', '1'): |
| platform_family = FAMILY_4600VZA; |
| break; |
| case BOOTLDRFAMILY('8', '5'): |
| platform_family = FAMILY_8500; |
| break; |
| case BOOTLDRFAMILY('R', '2'): |
| platform_family = FAMILY_8500RNG; |
| break; |
| case BOOTLDRFAMILY('8', '6'): |
| platform_family = FAMILY_8600; |
| break; |
| case BOOTLDRFAMILY('B', '1'): |
| platform_family = FAMILY_8600VZB; |
| break; |
| case BOOTLDRFAMILY('E', '1'): |
| platform_family = FAMILY_1500VZE; |
| break; |
| case BOOTLDRFAMILY('F', '1'): |
| platform_family = FAMILY_1500VZF; |
| break; |
| default: |
| platform_family = -1; |
| } |
| } |
| |
| unsigned int platform_get_family(void) |
| { |
| return platform_family; |
| } |
| EXPORT_SYMBOL(platform_get_family); |
| |
| /* |
| * \brief usb_eye_configure() for optimizing the USB eye on Calliope. |
| * |
| * \param unsigned int value saved to the register. |
| * |
| * \return none |
| * |
| */ |
| static void __init usb_eye_configure(unsigned int value) |
| { |
| asic_write(asic_read(crt_spare) | value, crt_spare); |
| } |
| |
| /* |
| * platform_get_asic - determine the ASIC type. |
| * |
| * \param none |
| * |
| * \return ASIC type; ASIC_UNKNOWN if none |
| * |
| */ |
| enum asic_type platform_get_asic(void) |
| { |
| return asic; |
| } |
| EXPORT_SYMBOL(platform_get_asic); |
| |
| /* |
| * platform_configure_usb - usb configuration based on platform type. |
| * @bcm1_usb2_ctl: value for the BCM1_USB2_CTL register, which is |
| * quirky |
| */ |
| static void __init platform_configure_usb(void) |
| { |
| u32 bcm1_usb2_ctl; |
| |
| if (usb_configured) |
| return; |
| |
| switch (asic) { |
| case ASIC_ZEUS: |
| fs_update(0x0000, 0x11, 0x02, 0); |
| bcm1_usb2_ctl = 0x803; |
| break; |
| |
| case ASIC_CRONUS: |
| case ASIC_CRONUSLITE: |
| fs_update(0x0000, 0x11, 0x02, 0); |
| bcm1_usb2_ctl = 0x803; |
| break; |
| |
| case ASIC_CALLIOPE: |
| fs_update(0x0000, 0x11, 0x02, 1); |
| |
| switch (platform_family) { |
| case FAMILY_1500VZE: |
| break; |
| |
| case FAMILY_1500VZF: |
| usb_eye_configure(0x003c0000); |
| break; |
| |
| default: |
| usb_eye_configure(0x00300000); |
| break; |
| } |
| |
| bcm1_usb2_ctl = 0x803; |
| break; |
| |
| default: |
| pr_err("Unknown ASIC type: %d\n", asic); |
| break; |
| } |
| |
| /* turn on USB power */ |
| asic_write(0, usb2_strap); |
| /* Enable all OHCI interrupts */ |
| asic_write(bcm1_usb2_ctl, usb2_control); |
| /* USB2_STBUS_OBC store32/load32 */ |
| asic_write(3, usb2_stbus_obc); |
| /* USB2_STBUS_MESS_SIZE 2 packets */ |
| asic_write(1, usb2_stbus_mess_size); |
| /* USB2_STBUS_CHUNK_SIZE 2 packets */ |
| asic_write(1, usb2_stbus_chunk_size); |
| |
| usb_configured = true; |
| } |
| |
| /* |
| * Set up the USB EHCI interface |
| */ |
| void platform_configure_usb_ehci() |
| { |
| platform_configure_usb(); |
| } |
| |
| /* |
| * Set up the USB OHCI interface |
| */ |
| void platform_configure_usb_ohci() |
| { |
| platform_configure_usb(); |
| } |
| |
| /* |
| * Shut the USB EHCI interface down--currently a NOP |
| */ |
| void platform_unconfigure_usb_ehci() |
| { |
| } |
| |
| /* |
| * Shut the USB OHCI interface down--currently a NOP |
| */ |
| void platform_unconfigure_usb_ohci() |
| { |
| } |
| |
| /** |
| * configure_platform - configuration based on platform type. |
| */ |
| void __init configure_platform(void) |
| { |
| platform_set_family(); |
| |
| switch (platform_family) { |
| case FAMILY_1500: |
| case FAMILY_1500VZE: |
| case FAMILY_1500VZF: |
| platform_features = FFS_CAPABLE; |
| asic = ASIC_CALLIOPE; |
| asic_phy_base = CALLIOPE_IO_BASE; |
| register_map = &calliope_register_map; |
| asic_base = (unsigned long)ioremap_nocache(asic_phy_base, |
| ASIC_IO_SIZE); |
| |
| if (platform_family == FAMILY_1500VZE) { |
| gp_resources = non_dvr_vze_calliope_resources; |
| pr_info("Platform: 1500/Vz Class E - " |
| "CALLIOPE, NON_DVR_CAPABLE\n"); |
| } else if (platform_family == FAMILY_1500VZF) { |
| gp_resources = non_dvr_vzf_calliope_resources; |
| pr_info("Platform: 1500/Vz Class F - " |
| "CALLIOPE, NON_DVR_CAPABLE\n"); |
| } else { |
| gp_resources = non_dvr_calliope_resources; |
| pr_info("Platform: 1500/RNG100 - CALLIOPE, " |
| "NON_DVR_CAPABLE\n"); |
| } |
| break; |
| |
| case FAMILY_4500: |
| platform_features = FFS_CAPABLE | PCIE_CAPABLE | |
| DISPLAY_CAPABLE; |
| asic = ASIC_ZEUS; |
| asic_phy_base = ZEUS_IO_BASE; |
| register_map = &zeus_register_map; |
| asic_base = (unsigned long)ioremap_nocache(asic_phy_base, |
| ASIC_IO_SIZE); |
| gp_resources = non_dvr_zeus_resources; |
| |
| pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n"); |
| break; |
| |
| case FAMILY_4600: |
| { |
| unsigned int chipversion = 0; |
| |
| /* The settop has PCIE but it isn't used, so don't advertise |
| * it*/ |
| platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; |
| asic_phy_base = CRONUS_IO_BASE; /* same as Cronus */ |
| register_map = &cronus_register_map; /* same as Cronus */ |
| asic_base = (unsigned long)ioremap_nocache(asic_phy_base, |
| ASIC_IO_SIZE); |
| gp_resources = non_dvr_cronuslite_resources; |
| |
| /* ASIC version will determine if this is a real CronusLite or |
| * Castrati(Cronus) */ |
| chipversion = asic_read(chipver3) << 24; |
| chipversion |= asic_read(chipver2) << 16; |
| chipversion |= asic_read(chipver1) << 8; |
| chipversion |= asic_read(chipver0); |
| |
| if ((chipversion == CRONUS_10) || (chipversion == CRONUS_11)) |
| asic = ASIC_CRONUS; |
| else |
| asic = ASIC_CRONUSLITE; |
| |
| pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, " |
| "chipversion=0x%08X\n", |
| (asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE", |
| chipversion); |
| break; |
| } |
| case FAMILY_4600VZA: |
| platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; |
| asic = ASIC_CRONUS; |
| asic_phy_base = CRONUS_IO_BASE; |
| register_map = &cronus_register_map; |
| asic_base = (unsigned long)ioremap_nocache(asic_phy_base, |
| ASIC_IO_SIZE); |
| gp_resources = non_dvr_cronus_resources; |
| |
| pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n"); |
| break; |
| |
| case FAMILY_8500: |
| case FAMILY_8500RNG: |
| platform_features = DVR_CAPABLE | PCIE_CAPABLE | |
| DISPLAY_CAPABLE; |
| asic = ASIC_ZEUS; |
| asic_phy_base = ZEUS_IO_BASE; |
| register_map = &zeus_register_map; |
| asic_base = (unsigned long)ioremap_nocache(asic_phy_base, |
| ASIC_IO_SIZE); |
| gp_resources = dvr_zeus_resources; |
| |
| pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n"); |
| break; |
| |
| case FAMILY_8600: |
| case FAMILY_8600VZB: |
| platform_features = DVR_CAPABLE | PCIE_CAPABLE | |
| DISPLAY_CAPABLE; |
| asic = ASIC_CRONUS; |
| asic_phy_base = CRONUS_IO_BASE; |
| register_map = &cronus_register_map; |
| asic_base = (unsigned long)ioremap_nocache(asic_phy_base, |
| ASIC_IO_SIZE); |
| gp_resources = dvr_cronus_resources; |
| |
| pr_info("Platform: 8600/Vz Class B - CRONUS, " |
| "DVR_CAPABLE\n"); |
| break; |
| |
| default: |
| pr_crit("Platform: UNKNOWN PLATFORM\n"); |
| break; |
| } |
| |
| switch (asic) { |
| case ASIC_ZEUS: |
| phys_to_bus_offset = 0x30000000; |
| break; |
| case ASIC_CALLIOPE: |
| phys_to_bus_offset = 0x10000000; |
| break; |
| case ASIC_CRONUSLITE: |
| /* Fall through */ |
| case ASIC_CRONUS: |
| /* |
| * TODO: We suppose 0x10000000 aliases into 0x20000000- |
| * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000- |
| * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000. |
| */ |
| phys_to_bus_offset = 0x10000000; |
| break; |
| default: |
| phys_to_bus_offset = 0x00000000; |
| break; |
| } |
| } |
| |
| /** |
| * platform_devices_init - sets up USB device resourse. |
| */ |
| static int __init platform_devices_init(void) |
| { |
| pr_notice("%s: ----- Initializing USB resources -----\n", __func__); |
| |
| asic_resource.start = asic_phy_base; |
| asic_resource.end += asic_resource.start; |
| |
| ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase); |
| ehci_resources[0].end += ehci_resources[0].start; |
| |
| ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision); |
| ohci_resources[0].end += ohci_resources[0].start; |
| |
| set_io_port_base(0); |
| |
| platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); |
| |
| return 0; |
| } |
| |
| arch_initcall(platform_devices_init); |
| |
| /* |
| * |
| * BOOTMEM ALLOCATION |
| * |
| */ |
| /* |
| * Allocates/reserves the Platform memory resources early in the boot process. |
| * This ignores any resources that are designated IORESOURCE_IO |
| */ |
| void __init platform_alloc_bootmem(void) |
| { |
| int i; |
| int total = 0; |
| |
| /* Get persistent memory data from command line before allocating |
| * resources. This need to happen before normal command line parsing |
| * has been done */ |
| pmem_setup_resource(); |
| |
| /* Loop through looking for resources that want a particular address */ |
| for (i = 0; gp_resources[i].flags != 0; i++) { |
| int size = gp_resources[i].end - gp_resources[i].start + 1; |
| if ((gp_resources[i].start != 0) && |
| ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) { |
| reserve_bootmem(bus_to_phys(gp_resources[i].start), |
| size, 0); |
| total += gp_resources[i].end - |
| gp_resources[i].start + 1; |
| pr_info("reserve resource %s at %08x (%u bytes)\n", |
| gp_resources[i].name, gp_resources[i].start, |
| gp_resources[i].end - |
| gp_resources[i].start + 1); |
| } |
| } |
| |
| /* Loop through assigning addresses for those that are left */ |
| for (i = 0; gp_resources[i].flags != 0; i++) { |
| int size = gp_resources[i].end - gp_resources[i].start + 1; |
| if ((gp_resources[i].start == 0) && |
| ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) { |
| void *mem = alloc_bootmem_pages(size); |
| |
| if (mem == NULL) |
| pr_err("Unable to allocate bootmem pages " |
| "for %s\n", gp_resources[i].name); |
| |
| else { |
| gp_resources[i].start = |
| phys_to_bus(virt_to_phys(mem)); |
| gp_resources[i].end = |
| gp_resources[i].start + size - 1; |
| total += size; |
| pr_info("allocate resource %s at %08x " |
| "(%u bytes)\n", |
| gp_resources[i].name, |
| gp_resources[i].start, size); |
| } |
| } |
| } |
| |
| pr_info("Total Platform driver memory allocation: 0x%08x\n", total); |
| |
| /* indicate resources that are platform I/O related */ |
| for (i = 0; gp_resources[i].flags != 0; i++) { |
| if ((gp_resources[i].start != 0) && |
| ((gp_resources[i].flags & IORESOURCE_IO) != 0)) { |
| pr_info("reserved platform resource %s at %08x\n", |
| gp_resources[i].name, gp_resources[i].start); |
| } |
| } |
| } |
| |
| /* |
| * |
| * PERSISTENT MEMORY (PMEM) CONFIGURATION |
| * |
| */ |
| static unsigned long pmemaddr __initdata; |
| |
| static int __init early_param_pmemaddr(char *p) |
| { |
| pmemaddr = (unsigned long)simple_strtoul(p, NULL, 0); |
| return 0; |
| } |
| early_param("pmemaddr", early_param_pmemaddr); |
| |
| static long pmemlen __initdata; |
| |
| static int __init early_param_pmemlen(char *p) |
| { |
| /* TODO: we can use this code when and if the bootloader ever changes this */ |
| #if 0 |
| pmemlen = (unsigned long)simple_strtoul(p, NULL, 0); |
| #else |
| pmemlen = 0x20000; |
| #endif |
| return 0; |
| } |
| early_param("pmemlen", early_param_pmemlen); |
| |
| /* |
| * Set up persistent memory. If we were given values, we patch the array of |
| * resources. Otherwise, persistent memory may be allocated anywhere at all. |
| */ |
| static void __init pmem_setup_resource(void) |
| { |
| struct resource *resource; |
| resource = asic_resource_get("DiagPersistentMemory"); |
| |
| if (resource && pmemaddr && pmemlen) { |
| /* The address provided by bootloader is in kseg0. Convert to |
| * a bus address. */ |
| resource->start = phys_to_bus(pmemaddr - 0x80000000); |
| resource->end = resource->start + pmemlen - 1; |
| |
| pr_info("persistent memory: start=0x%x end=0x%x\n", |
| resource->start, resource->end); |
| } |
| } |
| |
| /* |
| * |
| * RESOURCE ACCESS FUNCTIONS |
| * |
| */ |
| |
| /** |
| * asic_resource_get - retrieves parameters for a platform resource. |
| * @name: string to match resource |
| * |
| * Returns a pointer to a struct resource corresponding to the given name. |
| * |
| * CANNOT BE NAMED platform_resource_get, which would be the obvious choice, |
| * as this function name is already declared |
| */ |
| struct resource *asic_resource_get(const char *name) |
| { |
| int i; |
| |
| for (i = 0; gp_resources[i].flags != 0; i++) { |
| if (strcmp(gp_resources[i].name, name) == 0) |
| return &gp_resources[i]; |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(asic_resource_get); |
| |
| /** |
| * platform_release_memory - release pre-allocated memory |
| * @ptr: pointer to memory to release |
| * @size: size of resource |
| * |
| * This must only be called for memory allocated or reserved via the boot |
| * memory allocator. |
| */ |
| void platform_release_memory(void *ptr, int size) |
| { |
| unsigned long addr; |
| unsigned long end; |
| |
| addr = ((unsigned long)ptr + (PAGE_SIZE - 1)) & PAGE_MASK; |
| end = ((unsigned long)ptr + size) & PAGE_MASK; |
| |
| for (; addr < end; addr += PAGE_SIZE) { |
| ClearPageReserved(virt_to_page(__va(addr))); |
| init_page_count(virt_to_page(__va(addr))); |
| free_page((unsigned long)__va(addr)); |
| } |
| } |
| EXPORT_SYMBOL(platform_release_memory); |
| |
| /* |
| * |
| * FEATURE AVAILABILITY FUNCTIONS |
| * |
| */ |
| int platform_supports_dvr(void) |
| { |
| return (platform_features & DVR_CAPABLE) != 0; |
| } |
| |
| int platform_supports_ffs(void) |
| { |
| return (platform_features & FFS_CAPABLE) != 0; |
| } |
| |
| int platform_supports_pcie(void) |
| { |
| return (platform_features & PCIE_CAPABLE) != 0; |
| } |
| |
| int platform_supports_display(void) |
| { |
| return (platform_features & DISPLAY_CAPABLE) != 0; |
| } |