| /* Copyright, 1988-1992, Russell Nelson, Crynwr Software |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation, version 1. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/config.h> |
| |
| #if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) || defined (CONFIG_MACH_MP1000) |
| /* IXDP2401/IXDP2801 uses dword-aligned register addressing */ |
| #define CS89x0_PORT(reg) ((reg) * 2) |
| #else |
| #define CS89x0_PORT(reg) (reg) |
| #endif |
| |
| #define PP_ChipID 0x0000 /* offset 0h -> Corp -ID */ |
| /* offset 2h -> Model/Product Number */ |
| /* offset 3h -> Chip Revision Number */ |
| |
| #define PP_ISAIOB 0x0020 /* IO base address */ |
| #define PP_CS8900_ISAINT 0x0022 /* ISA interrupt select */ |
| #define PP_CS8920_ISAINT 0x0370 /* ISA interrupt select */ |
| #define PP_CS8900_ISADMA 0x0024 /* ISA Rec DMA channel */ |
| #define PP_CS8920_ISADMA 0x0374 /* ISA Rec DMA channel */ |
| #define PP_ISASOF 0x0026 /* ISA DMA offset */ |
| #define PP_DmaFrameCnt 0x0028 /* ISA DMA Frame count */ |
| #define PP_DmaByteCnt 0x002A /* ISA DMA Byte count */ |
| #define PP_CS8900_ISAMemB 0x002C /* Memory base */ |
| #define PP_CS8920_ISAMemB 0x0348 /* */ |
| |
| #define PP_ISABootBase 0x0030 /* Boot Prom base */ |
| #define PP_ISABootMask 0x0034 /* Boot Prom Mask */ |
| |
| /* EEPROM data and command registers */ |
| #define PP_EECMD 0x0040 /* NVR Interface Command register */ |
| #define PP_EEData 0x0042 /* NVR Interface Data Register */ |
| #define PP_DebugReg 0x0044 /* Debug Register */ |
| |
| #define PP_RxCFG 0x0102 /* Rx Bus config */ |
| #define PP_RxCTL 0x0104 /* Receive Control Register */ |
| #define PP_TxCFG 0x0106 /* Transmit Config Register */ |
| #define PP_TxCMD 0x0108 /* Transmit Command Register */ |
| #define PP_BufCFG 0x010A /* Bus configuration Register */ |
| #define PP_LineCTL 0x0112 /* Line Config Register */ |
| #define PP_SelfCTL 0x0114 /* Self Command Register */ |
| #define PP_BusCTL 0x0116 /* ISA bus control Register */ |
| #define PP_TestCTL 0x0118 /* Test Register */ |
| #define PP_AutoNegCTL 0x011C /* Auto Negotiation Ctrl */ |
| |
| #define PP_ISQ 0x0120 /* Interrupt Status */ |
| #define PP_RxEvent 0x0124 /* Rx Event Register */ |
| #define PP_TxEvent 0x0128 /* Tx Event Register */ |
| #define PP_BufEvent 0x012C /* Bus Event Register */ |
| #define PP_RxMiss 0x0130 /* Receive Miss Count */ |
| #define PP_TxCol 0x0132 /* Transmit Collision Count */ |
| #define PP_LineST 0x0134 /* Line State Register */ |
| #define PP_SelfST 0x0136 /* Self State register */ |
| #define PP_BusST 0x0138 /* Bus Status */ |
| #define PP_TDR 0x013C /* Time Domain Reflectometry */ |
| #define PP_AutoNegST 0x013E /* Auto Neg Status */ |
| #define PP_TxCommand 0x0144 /* Tx Command */ |
| #define PP_TxLength 0x0146 /* Tx Length */ |
| #define PP_LAF 0x0150 /* Hash Table */ |
| #define PP_IA 0x0158 /* Physical Address Register */ |
| |
| #define PP_RxStatus 0x0400 /* Receive start of frame */ |
| #define PP_RxLength 0x0402 /* Receive Length of frame */ |
| #define PP_RxFrame 0x0404 /* Receive frame pointer */ |
| #define PP_TxFrame 0x0A00 /* Transmit frame pointer */ |
| |
| /* Primary I/O Base Address. If no I/O base is supplied by the user, then this */ |
| /* can be used as the default I/O base to access the PacketPage Area. */ |
| #define DEFAULTIOBASE 0x0300 |
| #define FIRST_IO 0x020C /* First I/O port to check */ |
| #define LAST_IO 0x037C /* Last I/O port to check (+10h) */ |
| #define ADD_MASK 0x3000 /* Mask it use of the ADD_PORT register */ |
| #define ADD_SIG 0x3000 /* Expected ID signature */ |
| |
| /* On Macs, we only need use the ISA I/O stuff until we do MEMORY_ON */ |
| #ifdef CONFIG_MAC |
| #define LCSLOTBASE 0xfee00000 |
| #define MMIOBASE 0x40000 |
| #endif |
| |
| #define CHIP_EISA_ID_SIG 0x630E /* Product ID Code for Crystal Chip (CS8900 spec 4.3) */ |
| #define CHIP_EISA_ID_SIG_STR "0x630E" |
| |
| #ifdef IBMEIPKT |
| #define EISA_ID_SIG 0x4D24 /* IBM */ |
| #define PART_NO_SIG 0x1010 /* IBM */ |
| #define MONGOOSE_BIT 0x0000 /* IBM */ |
| #else |
| #define EISA_ID_SIG 0x630E /* PnP Vendor ID (same as chip id for Crystal board) */ |
| #define PART_NO_SIG 0x4000 /* ID code CS8920 board (PnP Vendor Product code) */ |
| #define MONGOOSE_BIT 0x2000 /* PART_NO_SIG + MONGOOSE_BUT => ID of mongoose */ |
| #endif |
| |
| #define PRODUCT_ID_ADD 0x0002 /* Address of product ID */ |
| |
| /* Mask to find out the types of registers */ |
| #define REG_TYPE_MASK 0x001F |
| |
| /* Eeprom Commands */ |
| #define ERSE_WR_ENBL 0x00F0 |
| #define ERSE_WR_DISABLE 0x0000 |
| |
| /* Defines Control/Config register quintuplet numbers */ |
| #define RX_BUF_CFG 0x0003 |
| #define RX_CONTROL 0x0005 |
| #define TX_CFG 0x0007 |
| #define TX_COMMAND 0x0009 |
| #define BUF_CFG 0x000B |
| #define LINE_CONTROL 0x0013 |
| #define SELF_CONTROL 0x0015 |
| #define BUS_CONTROL 0x0017 |
| #define TEST_CONTROL 0x0019 |
| |
| /* Defines Status/Count registers quintuplet numbers */ |
| #define RX_EVENT 0x0004 |
| #define TX_EVENT 0x0008 |
| #define BUF_EVENT 0x000C |
| #define RX_MISS_COUNT 0x0010 |
| #define TX_COL_COUNT 0x0012 |
| #define LINE_STATUS 0x0014 |
| #define SELF_STATUS 0x0016 |
| #define BUS_STATUS 0x0018 |
| #define TDR 0x001C |
| |
| /* PP_RxCFG - Receive Configuration and Interrupt Mask bit definition - Read/write */ |
| #define SKIP_1 0x0040 |
| #define RX_STREAM_ENBL 0x0080 |
| #define RX_OK_ENBL 0x0100 |
| #define RX_DMA_ONLY 0x0200 |
| #define AUTO_RX_DMA 0x0400 |
| #define BUFFER_CRC 0x0800 |
| #define RX_CRC_ERROR_ENBL 0x1000 |
| #define RX_RUNT_ENBL 0x2000 |
| #define RX_EXTRA_DATA_ENBL 0x4000 |
| |
| /* PP_RxCTL - Receive Control bit definition - Read/write */ |
| #define RX_IA_HASH_ACCEPT 0x0040 |
| #define RX_PROM_ACCEPT 0x0080 |
| #define RX_OK_ACCEPT 0x0100 |
| #define RX_MULTCAST_ACCEPT 0x0200 |
| #define RX_IA_ACCEPT 0x0400 |
| #define RX_BROADCAST_ACCEPT 0x0800 |
| #define RX_BAD_CRC_ACCEPT 0x1000 |
| #define RX_RUNT_ACCEPT 0x2000 |
| #define RX_EXTRA_DATA_ACCEPT 0x4000 |
| #define RX_ALL_ACCEPT (RX_PROM_ACCEPT|RX_BAD_CRC_ACCEPT|RX_RUNT_ACCEPT|RX_EXTRA_DATA_ACCEPT) |
| /* Default receive mode - individually addressed, broadcast, and error free */ |
| #define DEF_RX_ACCEPT (RX_IA_ACCEPT | RX_BROADCAST_ACCEPT | RX_OK_ACCEPT) |
| |
| /* PP_TxCFG - Transmit Configuration Interrupt Mask bit definition - Read/write */ |
| #define TX_LOST_CRS_ENBL 0x0040 |
| #define TX_SQE_ERROR_ENBL 0x0080 |
| #define TX_OK_ENBL 0x0100 |
| #define TX_LATE_COL_ENBL 0x0200 |
| #define TX_JBR_ENBL 0x0400 |
| #define TX_ANY_COL_ENBL 0x0800 |
| #define TX_16_COL_ENBL 0x8000 |
| |
| /* PP_TxCMD - Transmit Command bit definition - Read-only */ |
| #define TX_START_4_BYTES 0x0000 |
| #define TX_START_64_BYTES 0x0040 |
| #define TX_START_128_BYTES 0x0080 |
| #define TX_START_ALL_BYTES 0x00C0 |
| #define TX_FORCE 0x0100 |
| #define TX_ONE_COL 0x0200 |
| #define TX_TWO_PART_DEFF_DISABLE 0x0400 |
| #define TX_NO_CRC 0x1000 |
| #define TX_RUNT 0x2000 |
| |
| /* PP_BufCFG - Buffer Configuration Interrupt Mask bit definition - Read/write */ |
| #define GENERATE_SW_INTERRUPT 0x0040 |
| #define RX_DMA_ENBL 0x0080 |
| #define READY_FOR_TX_ENBL 0x0100 |
| #define TX_UNDERRUN_ENBL 0x0200 |
| #define RX_MISS_ENBL 0x0400 |
| #define RX_128_BYTE_ENBL 0x0800 |
| #define TX_COL_COUNT_OVRFLOW_ENBL 0x1000 |
| #define RX_MISS_COUNT_OVRFLOW_ENBL 0x2000 |
| #define RX_DEST_MATCH_ENBL 0x8000 |
| |
| /* PP_LineCTL - Line Control bit definition - Read/write */ |
| #define SERIAL_RX_ON 0x0040 |
| #define SERIAL_TX_ON 0x0080 |
| #define AUI_ONLY 0x0100 |
| #define AUTO_AUI_10BASET 0x0200 |
| #define MODIFIED_BACKOFF 0x0800 |
| #define NO_AUTO_POLARITY 0x1000 |
| #define TWO_PART_DEFDIS 0x2000 |
| #define LOW_RX_SQUELCH 0x4000 |
| |
| /* PP_SelfCTL - Software Self Control bit definition - Read/write */ |
| #define POWER_ON_RESET 0x0040 |
| #define SW_STOP 0x0100 |
| #define SLEEP_ON 0x0200 |
| #define AUTO_WAKEUP 0x0400 |
| #define HCB0_ENBL 0x1000 |
| #define HCB1_ENBL 0x2000 |
| #define HCB0 0x4000 |
| #define HCB1 0x8000 |
| |
| /* PP_BusCTL - ISA Bus Control bit definition - Read/write */ |
| #define RESET_RX_DMA 0x0040 |
| #define MEMORY_ON 0x0400 |
| #define DMA_BURST_MODE 0x0800 |
| #define IO_CHANNEL_READY_ON 0x1000 |
| #define RX_DMA_SIZE_64K 0x2000 |
| #define ENABLE_IRQ 0x8000 |
| |
| /* PP_TestCTL - Test Control bit definition - Read/write */ |
| #define LINK_OFF 0x0080 |
| #define ENDEC_LOOPBACK 0x0200 |
| #define AUI_LOOPBACK 0x0400 |
| #define BACKOFF_OFF 0x0800 |
| #define FDX_8900 0x4000 |
| #define FAST_TEST 0x8000 |
| |
| /* PP_RxEvent - Receive Event Bit definition - Read-only */ |
| #define RX_IA_HASHED 0x0040 |
| #define RX_DRIBBLE 0x0080 |
| #define RX_OK 0x0100 |
| #define RX_HASHED 0x0200 |
| #define RX_IA 0x0400 |
| #define RX_BROADCAST 0x0800 |
| #define RX_CRC_ERROR 0x1000 |
| #define RX_RUNT 0x2000 |
| #define RX_EXTRA_DATA 0x4000 |
| |
| #define HASH_INDEX_MASK 0x0FC00 |
| |
| /* PP_TxEvent - Transmit Event Bit definition - Read-only */ |
| #define TX_LOST_CRS 0x0040 |
| #define TX_SQE_ERROR 0x0080 |
| #define TX_OK 0x0100 |
| #define TX_LATE_COL 0x0200 |
| #define TX_JBR 0x0400 |
| #define TX_16_COL 0x8000 |
| #define TX_SEND_OK_BITS (TX_OK|TX_LOST_CRS) |
| #define TX_COL_COUNT_MASK 0x7800 |
| |
| /* PP_BufEvent - Buffer Event Bit definition - Read-only */ |
| #define SW_INTERRUPT 0x0040 |
| #define RX_DMA 0x0080 |
| #define READY_FOR_TX 0x0100 |
| #define TX_UNDERRUN 0x0200 |
| #define RX_MISS 0x0400 |
| #define RX_128_BYTE 0x0800 |
| #define TX_COL_OVRFLW 0x1000 |
| #define RX_MISS_OVRFLW 0x2000 |
| #define RX_DEST_MATCH 0x8000 |
| |
| /* PP_LineST - Ethernet Line Status bit definition - Read-only */ |
| #define LINK_OK 0x0080 |
| #define AUI_ON 0x0100 |
| #define TENBASET_ON 0x0200 |
| #define POLARITY_OK 0x1000 |
| #define CRS_OK 0x4000 |
| |
| /* PP_SelfST - Chip Software Status bit definition */ |
| #define ACTIVE_33V 0x0040 |
| #define INIT_DONE 0x0080 |
| #define SI_BUSY 0x0100 |
| #define EEPROM_PRESENT 0x0200 |
| #define EEPROM_OK 0x0400 |
| #define EL_PRESENT 0x0800 |
| #define EE_SIZE_64 0x1000 |
| |
| /* PP_BusST - ISA Bus Status bit definition */ |
| #define TX_BID_ERROR 0x0080 |
| #define READY_FOR_TX_NOW 0x0100 |
| |
| /* PP_AutoNegCTL - Auto Negotiation Control bit definition */ |
| #define RE_NEG_NOW 0x0040 |
| #define ALLOW_FDX 0x0080 |
| #define AUTO_NEG_ENABLE 0x0100 |
| #define NLP_ENABLE 0x0200 |
| #define FORCE_FDX 0x8000 |
| #define AUTO_NEG_BITS (FORCE_FDX|NLP_ENABLE|AUTO_NEG_ENABLE) |
| #define AUTO_NEG_MASK (FORCE_FDX|NLP_ENABLE|AUTO_NEG_ENABLE|ALLOW_FDX|RE_NEG_NOW) |
| |
| /* PP_AutoNegST - Auto Negotiation Status bit definition */ |
| #define AUTO_NEG_BUSY 0x0080 |
| #define FLP_LINK 0x0100 |
| #define FLP_LINK_GOOD 0x0800 |
| #define LINK_FAULT 0x1000 |
| #define HDX_ACTIVE 0x4000 |
| #define FDX_ACTIVE 0x8000 |
| |
| /* The following block defines the ISQ event types */ |
| #define ISQ_RECEIVER_EVENT 0x04 |
| #define ISQ_TRANSMITTER_EVENT 0x08 |
| #define ISQ_BUFFER_EVENT 0x0c |
| #define ISQ_RX_MISS_EVENT 0x10 |
| #define ISQ_TX_COL_EVENT 0x12 |
| |
| #define ISQ_EVENT_MASK 0x003F /* ISQ mask to find out type of event */ |
| #define ISQ_HIST 16 /* small history buffer */ |
| #define AUTOINCREMENT 0x8000 /* Bit mask to set bit-15 for autoincrement */ |
| |
| #define TXRXBUFSIZE 0x0600 |
| #define RXDMABUFSIZE 0x8000 |
| #define RXDMASIZE 0x4000 |
| #define TXRX_LENGTH_MASK 0x07FF |
| |
| /* rx options bits */ |
| #define RCV_WITH_RXON 1 /* Set SerRx ON */ |
| #define RCV_COUNTS 2 /* Use Framecnt1 */ |
| #define RCV_PONG 4 /* Pong respondent */ |
| #define RCV_DONG 8 /* Dong operation */ |
| #define RCV_POLLING 0x10 /* Poll RxEvent */ |
| #define RCV_ISQ 0x20 /* Use ISQ, int */ |
| #define RCV_AUTO_DMA 0x100 /* Set AutoRxDMAE */ |
| #define RCV_DMA 0x200 /* Set RxDMA only */ |
| #define RCV_DMA_ALL 0x400 /* Copy all DMA'ed */ |
| #define RCV_FIXED_DATA 0x800 /* Every frame same */ |
| #define RCV_IO 0x1000 /* Use ISA IO only */ |
| #define RCV_MEMORY 0x2000 /* Use ISA Memory */ |
| |
| #define RAM_SIZE 0x1000 /* The card has 4k bytes or RAM */ |
| #define PKT_START PP_TxFrame /* Start of packet RAM */ |
| |
| #define RX_FRAME_PORT CS89x0_PORT(0x0000) |
| #define TX_FRAME_PORT RX_FRAME_PORT |
| #define TX_CMD_PORT CS89x0_PORT(0x0004) |
| #define TX_NOW 0x0000 /* Tx packet after 5 bytes copied */ |
| #define TX_AFTER_381 0x0040 /* Tx packet after 381 bytes copied */ |
| #define TX_AFTER_ALL 0x00c0 /* Tx packet after all bytes copied */ |
| #define TX_LEN_PORT CS89x0_PORT(0x0006) |
| #define ISQ_PORT CS89x0_PORT(0x0008) |
| #define ADD_PORT CS89x0_PORT(0x000A) |
| #define DATA_PORT CS89x0_PORT(0x000C) |
| |
| #define EEPROM_WRITE_EN 0x00F0 |
| #define EEPROM_WRITE_DIS 0x0000 |
| #define EEPROM_WRITE_CMD 0x0100 |
| #define EEPROM_READ_CMD 0x0200 |
| |
| /* Receive Header */ |
| /* Description of header of each packet in receive area of memory */ |
| #define RBUF_EVENT_LOW 0 /* Low byte of RxEvent - status of received frame */ |
| #define RBUF_EVENT_HIGH 1 /* High byte of RxEvent - status of received frame */ |
| #define RBUF_LEN_LOW 2 /* Length of received data - low byte */ |
| #define RBUF_LEN_HI 3 /* Length of received data - high byte */ |
| #define RBUF_HEAD_LEN 4 /* Length of this header */ |
| |
| #define CHIP_READ 0x1 /* Used to mark state of the repins code (chip or dma) */ |
| #define DMA_READ 0x2 /* Used to mark state of the repins code (chip or dma) */ |
| |
| /* for bios scan */ |
| /* */ |
| #ifdef CSDEBUG |
| /* use these values for debugging bios scan */ |
| #define BIOS_START_SEG 0x00000 |
| #define BIOS_OFFSET_INC 0x0010 |
| #else |
| #define BIOS_START_SEG 0x0c000 |
| #define BIOS_OFFSET_INC 0x0200 |
| #endif |
| |
| #define BIOS_LAST_OFFSET 0x0fc00 |
| |
| /* Byte offsets into the EEPROM configuration buffer */ |
| #define ISA_CNF_OFFSET 0x6 |
| #define TX_CTL_OFFSET (ISA_CNF_OFFSET + 8) /* 8900 eeprom */ |
| #define AUTO_NEG_CNF_OFFSET (ISA_CNF_OFFSET + 8) /* 8920 eeprom */ |
| |
| /* the assumption here is that the bits in the eeprom are generally */ |
| /* in the same position as those in the autonegctl register. */ |
| /* Of course the IMM bit is not in that register so it must be */ |
| /* masked out */ |
| #define EE_FORCE_FDX 0x8000 |
| #define EE_NLP_ENABLE 0x0200 |
| #define EE_AUTO_NEG_ENABLE 0x0100 |
| #define EE_ALLOW_FDX 0x0080 |
| #define EE_AUTO_NEG_CNF_MASK (EE_FORCE_FDX|EE_NLP_ENABLE|EE_AUTO_NEG_ENABLE|EE_ALLOW_FDX) |
| |
| #define IMM_BIT 0x0040 /* ignore missing media */ |
| |
| #define ADAPTER_CNF_OFFSET (AUTO_NEG_CNF_OFFSET + 2) |
| #define A_CNF_10B_T 0x0001 |
| #define A_CNF_AUI 0x0002 |
| #define A_CNF_10B_2 0x0004 |
| #define A_CNF_MEDIA_TYPE 0x0070 |
| #define A_CNF_MEDIA_AUTO 0x0070 |
| #define A_CNF_MEDIA_10B_T 0x0020 |
| #define A_CNF_MEDIA_AUI 0x0040 |
| #define A_CNF_MEDIA_10B_2 0x0010 |
| #define A_CNF_DC_DC_POLARITY 0x0080 |
| #define A_CNF_NO_AUTO_POLARITY 0x2000 |
| #define A_CNF_LOW_RX_SQUELCH 0x4000 |
| #define A_CNF_EXTND_10B_2 0x8000 |
| |
| #define PACKET_PAGE_OFFSET 0x8 |
| |
| /* Bit definitions for the ISA configuration word from the EEPROM */ |
| #define INT_NO_MASK 0x000F |
| #define DMA_NO_MASK 0x0070 |
| #define ISA_DMA_SIZE 0x0200 |
| #define ISA_AUTO_RxDMA 0x0400 |
| #define ISA_RxDMA 0x0800 |
| #define DMA_BURST 0x1000 |
| #define STREAM_TRANSFER 0x2000 |
| #define ANY_ISA_DMA (ISA_AUTO_RxDMA | ISA_RxDMA) |
| |
| /* DMA controller registers */ |
| #define DMA_BASE 0x00 /* DMA controller base */ |
| #define DMA_BASE_2 0x0C0 /* DMA controller base */ |
| |
| #define DMA_STAT 0x0D0 /* DMA controller status register */ |
| #define DMA_MASK 0x0D4 /* DMA controller mask register */ |
| #define DMA_MODE 0x0D6 /* DMA controller mode register */ |
| #define DMA_RESETFF 0x0D8 /* DMA controller first/last flip flop */ |
| |
| /* DMA data */ |
| #define DMA_DISABLE 0x04 /* Disable channel n */ |
| #define DMA_ENABLE 0x00 /* Enable channel n */ |
| /* Demand transfers, incr. address, auto init, writes, ch. n */ |
| #define DMA_RX_MODE 0x14 |
| /* Demand transfers, incr. address, auto init, reads, ch. n */ |
| #define DMA_TX_MODE 0x18 |
| |
| #define DMA_SIZE (16*1024) /* Size of dma buffer - 16k */ |
| |
| #define CS8900 0x0000 |
| #define CS8920 0x4000 |
| #define CS8920M 0x6000 |
| #define REVISON_BITS 0x1F00 |
| #define EEVER_NUMBER 0x12 |
| #define CHKSUM_LEN 0x14 |
| #define CHKSUM_VAL 0x0000 |
| #define START_EEPROM_DATA 0x001c /* Offset into eeprom for start of data */ |
| #define IRQ_MAP_EEPROM_DATA 0x0046 /* Offset into eeprom for the IRQ map */ |
| #define IRQ_MAP_LEN 0x0004 /* No of bytes to read for the IRQ map */ |
| #define PNP_IRQ_FRMT 0x0022 /* PNP small item IRQ format */ |
| #ifdef CONFIG_SH_HICOSH4 |
| #define CS8900_IRQ_MAP 0x0002 /* HiCO-SH4 board has its IRQ on #1 */ |
| #else |
| #define CS8900_IRQ_MAP 0x1c20 /* This IRQ map is fixed */ |
| #endif |
| |
| #define CS8920_NO_INTS 0x0F /* Max CS8920 interrupt select # */ |
| |
| #define PNP_ADD_PORT 0x0279 |
| #define PNP_WRITE_PORT 0x0A79 |
| |
| #define GET_PNP_ISA_STRUCT 0x40 |
| #define PNP_ISA_STRUCT_LEN 0x06 |
| #define PNP_CSN_CNT_OFF 0x01 |
| #define PNP_RD_PORT_OFF 0x02 |
| #define PNP_FUNCTION_OK 0x00 |
| #define PNP_WAKE 0x03 |
| #define PNP_RSRC_DATA 0x04 |
| #define PNP_RSRC_READY 0x01 |
| #define PNP_STATUS 0x05 |
| #define PNP_ACTIVATE 0x30 |
| #define PNP_CNF_IO_H 0x60 |
| #define PNP_CNF_IO_L 0x61 |
| #define PNP_CNF_INT 0x70 |
| #define PNP_CNF_DMA 0x74 |
| #define PNP_CNF_MEM 0x48 |
| |
| #define BIT0 1 |
| #define BIT15 0x8000 |
| |