| * CSR SiRFprimaII Serial Peripheral Interface |
| - compatible : Should be "sirf,prima2-spi", "sirf,prima2-usp" |
| - reg : Offset and length of the register set for the device |
| - interrupts : Should contain SPI interrupt |
| - resets: phandle to the reset controller asserting this device in |
| See ../reset/reset.txt for details. |
| - dmas : Must contain an entry for each entry in clock-names. |
| See ../dma/dma.txt for details. |
| - dma-names : Must include the following entries: |
| - clocks : Must contain an entry for each entry in clock-names. |
| See ../clocks/clock-bindings.txt for details. |
| - #address-cells: Number of cells required to define a chip select |
| address on the SPI bus. Should be set to 1. |
| - #size-cells: Should be zero. |
| - spi-max-frequency: Specifies maximum SPI clock frequency, |
| Units - Hz. Definition as per |
| Documentation/devicetree/bindings/spi/spi-bus.txt |
| - cs-gpios: should specify GPIOs used for chipselects. |
| compatible = "sirf,prima2-spi"; |
| reg = <0xb00d0000 0x10000>; |