| /* |
| * OMAP clock: data structure definitions, function prototypes, shared macros |
| * |
| * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation |
| * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> |
| * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __ARCH_ARM_OMAP_CLOCK_H |
| #define __ARCH_ARM_OMAP_CLOCK_H |
| |
| #include <linux/list.h> |
| |
| struct module; |
| struct clk; |
| struct clockdomain; |
| |
| struct clkops { |
| int (*enable)(struct clk *); |
| void (*disable)(struct clk *); |
| void (*find_idlest)(struct clk *, void __iomem **, |
| u8 *, u8 *); |
| void (*find_companion)(struct clk *, void __iomem **, |
| u8 *); |
| }; |
| |
| #ifdef CONFIG_ARCH_OMAP2PLUS |
| |
| struct clksel_rate { |
| u32 val; |
| u8 div; |
| u8 flags; |
| }; |
| |
| struct clksel { |
| struct clk *parent; |
| const struct clksel_rate *rates; |
| }; |
| |
| /** |
| * struct dpll_data - DPLL registers and integration data |
| * @mult_div1_reg: register containing the DPLL M and N bitfields |
| * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg |
| * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg |
| * @clk_bypass: struct clk pointer to the clock's bypass clock input |
| * @clk_ref: struct clk pointer to the clock's reference clock input |
| * @control_reg: register containing the DPLL mode bitfield |
| * @enable_mask: mask of the DPLL mode bitfield in @control_reg |
| * @rate_tolerance: maximum variance allowed from target rate (in Hz) |
| * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() |
| * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() |
| * @max_multiplier: maximum valid non-bypass multiplier value (actual) |
| * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() |
| * @min_divider: minimum valid non-bypass divider value (actual) |
| * @max_divider: maximum valid non-bypass divider value (actual) |
| * @modes: possible values of @enable_mask |
| * @autoidle_reg: register containing the DPLL autoidle mode bitfield |
| * @idlest_reg: register containing the DPLL idle status bitfield |
| * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg |
| * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg |
| * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg |
| * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg |
| * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs |
| * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs |
| * @flags: DPLL type/features (see below) |
| * |
| * Possible values for @flags: |
| * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) |
| * NO_DCO_SEL: don't program DCO (only for some J-type DPLLs) |
| |
| * @freqsel_mask is only used on the OMAP34xx family and AM35xx. |
| * |
| * XXX Some DPLLs have multiple bypass inputs, so it's not technically |
| * correct to only have one @clk_bypass pointer. |
| * |
| * XXX @rate_tolerance should probably be deprecated - currently there |
| * don't seem to be any usecases for DPLL rounding that is not exact. |
| * |
| * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, |
| * @last_rounded_n) should be separated from the runtime-fixed fields |
| * and placed into a differenct structure, so that the runtime-fixed data |
| * can be placed into read-only space. |
| */ |
| struct dpll_data { |
| void __iomem *mult_div1_reg; |
| u32 mult_mask; |
| u32 div1_mask; |
| struct clk *clk_bypass; |
| struct clk *clk_ref; |
| void __iomem *control_reg; |
| u32 enable_mask; |
| unsigned int rate_tolerance; |
| unsigned long last_rounded_rate; |
| u16 last_rounded_m; |
| u16 max_multiplier; |
| u8 last_rounded_n; |
| u8 min_divider; |
| u8 max_divider; |
| u8 modes; |
| #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) |
| void __iomem *autoidle_reg; |
| void __iomem *idlest_reg; |
| u32 autoidle_mask; |
| u32 freqsel_mask; |
| u32 idlest_mask; |
| u8 auto_recal_bit; |
| u8 recal_en_bit; |
| u8 recal_st_bit; |
| u8 flags; |
| # endif |
| }; |
| |
| #endif |
| |
| struct clk { |
| struct list_head node; |
| const struct clkops *ops; |
| const char *name; |
| struct clk *parent; |
| struct list_head children; |
| struct list_head sibling; /* node for children */ |
| unsigned long rate; |
| void __iomem *enable_reg; |
| unsigned long (*recalc)(struct clk *); |
| int (*set_rate)(struct clk *, unsigned long); |
| long (*round_rate)(struct clk *, unsigned long); |
| void (*init)(struct clk *); |
| __u8 enable_bit; |
| __s8 usecount; |
| u8 fixed_div; |
| u8 flags; |
| #ifdef CONFIG_ARCH_OMAP2PLUS |
| void __iomem *clksel_reg; |
| u32 clksel_mask; |
| const struct clksel *clksel; |
| struct dpll_data *dpll_data; |
| const char *clkdm_name; |
| struct clockdomain *clkdm; |
| #else |
| __u8 rate_offset; |
| __u8 src_offset; |
| #endif |
| #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) |
| struct dentry *dent; /* For visible tree hierarchy */ |
| #endif |
| }; |
| |
| struct cpufreq_frequency_table; |
| |
| struct clk_functions { |
| int (*clk_enable)(struct clk *clk); |
| void (*clk_disable)(struct clk *clk); |
| long (*clk_round_rate)(struct clk *clk, unsigned long rate); |
| int (*clk_set_rate)(struct clk *clk, unsigned long rate); |
| int (*clk_set_parent)(struct clk *clk, struct clk *parent); |
| void (*clk_allow_idle)(struct clk *clk); |
| void (*clk_deny_idle)(struct clk *clk); |
| void (*clk_disable_unused)(struct clk *clk); |
| #ifdef CONFIG_CPU_FREQ |
| void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); |
| void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **); |
| #endif |
| }; |
| |
| extern int mpurate; |
| |
| extern int clk_init(struct clk_functions *custom_clocks); |
| extern void clk_preinit(struct clk *clk); |
| extern int clk_register(struct clk *clk); |
| extern void clk_reparent(struct clk *child, struct clk *parent); |
| extern void clk_unregister(struct clk *clk); |
| extern void propagate_rate(struct clk *clk); |
| extern void recalculate_root_clocks(void); |
| extern unsigned long followparent_recalc(struct clk *clk); |
| extern void clk_enable_init_clocks(void); |
| unsigned long omap_fixed_divisor_recalc(struct clk *clk); |
| #ifdef CONFIG_CPU_FREQ |
| extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); |
| extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); |
| #endif |
| extern struct clk *omap_clk_get_by_name(const char *name); |
| |
| extern const struct clkops clkops_null; |
| |
| extern struct clk dummy_ck; |
| |
| /* Clock flags */ |
| #define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ |
| #define CLOCK_IDLE_CONTROL (1 << 1) |
| #define CLOCK_NO_IDLE_PARENT (1 << 2) |
| #define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ |
| #define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ |
| |
| /* Clksel_rate flags */ |
| #define RATE_IN_242X (1 << 0) |
| #define RATE_IN_243X (1 << 1) |
| #define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */ |
| #define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */ |
| #define RATE_IN_36XX (1 << 4) |
| #define RATE_IN_4430 (1 << 5) |
| |
| #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) |
| |
| #define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX) |
| |
| #endif |