| /* |
| * linux/fs/ext3/namei.c |
| * |
| * Copyright (C) 1992, 1993, 1994, 1995 |
| * Remy Card (card@masi.ibp.fr) |
| * Laboratoire MASI - Institut Blaise Pascal |
| * Universite Pierre et Marie Curie (Paris VI) |
| * |
| * from |
| * |
| * linux/fs/minix/namei.c |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * |
| * Big-endian to little-endian byte-swapping/bitmaps by |
| * David S. Miller (davem@caip.rutgers.edu), 1995 |
| * Directory entry file type support and forward compatibility hooks |
| * for B-tree directories by Theodore Ts'o (tytso@mit.edu), 1998 |
| * Hash Tree Directory indexing (c) |
| * Daniel Phillips, 2001 |
| * Hash Tree Directory indexing porting |
| * Christopher Li, 2002 |
| * Hash Tree Directory indexing cleanup |
| * Theodore Ts'o, 2002 |
| */ |
| |
| #include <linux/fs.h> |
| #include <linux/pagemap.h> |
| #include <linux/jbd.h> |
| #include <linux/time.h> |
| #include <linux/ext3_fs.h> |
| #include <linux/ext3_jbd.h> |
| #include <linux/fcntl.h> |
| #include <linux/stat.h> |
| #include <linux/string.h> |
| #include <linux/quotaops.h> |
| #include <linux/buffer_head.h> |
| #include <linux/bio.h> |
| |
| #include "namei.h" |
| #include "xattr.h" |
| #include "acl.h" |
| |
| /* |
| * define how far ahead to read directories while searching them. |
| */ |
| #define NAMEI_RA_CHUNKS 2 |
| #define NAMEI_RA_BLOCKS 4 |
| #define NAMEI_RA_SIZE (NAMEI_RA_CHUNKS * NAMEI_RA_BLOCKS) |
| #define NAMEI_RA_INDEX(c,b) (((c) * NAMEI_RA_BLOCKS) + (b)) |
| |
| static struct buffer_head *ext3_append(handle_t *handle, |
| struct inode *inode, |
| u32 *block, int *err) |
| { |
| struct buffer_head *bh; |
| |
| *block = inode->i_size >> inode->i_sb->s_blocksize_bits; |
| |
| bh = ext3_bread(handle, inode, *block, 1, err); |
| if (bh) { |
| inode->i_size += inode->i_sb->s_blocksize; |
| EXT3_I(inode)->i_disksize = inode->i_size; |
| *err = ext3_journal_get_write_access(handle, bh); |
| if (*err) { |
| brelse(bh); |
| bh = NULL; |
| } |
| } |
| return bh; |
| } |
| |
| #ifndef assert |
| #define assert(test) J_ASSERT(test) |
| #endif |
| |
| #ifdef DX_DEBUG |
| #define dxtrace(command) command |
| #else |
| #define dxtrace(command) |
| #endif |
| |
| struct fake_dirent |
| { |
| __le32 inode; |
| __le16 rec_len; |
| u8 name_len; |
| u8 file_type; |
| }; |
| |
| struct dx_countlimit |
| { |
| __le16 limit; |
| __le16 count; |
| }; |
| |
| struct dx_entry |
| { |
| __le32 hash; |
| __le32 block; |
| }; |
| |
| /* |
| * dx_root_info is laid out so that if it should somehow get overlaid by a |
| * dirent the two low bits of the hash version will be zero. Therefore, the |
| * hash version mod 4 should never be 0. Sincerely, the paranoia department. |
| */ |
| |
| struct dx_root |
| { |
| struct fake_dirent dot; |
| char dot_name[4]; |
| struct fake_dirent dotdot; |
| char dotdot_name[4]; |
| struct dx_root_info |
| { |
| __le32 reserved_zero; |
| u8 hash_version; |
| u8 info_length; /* 8 */ |
| u8 indirect_levels; |
| u8 unused_flags; |
| } |
| info; |
| struct dx_entry entries[0]; |
| }; |
| |
| struct dx_node |
| { |
| struct fake_dirent fake; |
| struct dx_entry entries[0]; |
| }; |
| |
| |
| struct dx_frame |
| { |
| struct buffer_head *bh; |
| struct dx_entry *entries; |
| struct dx_entry *at; |
| }; |
| |
| struct dx_map_entry |
| { |
| u32 hash; |
| u16 offs; |
| u16 size; |
| }; |
| |
| static inline unsigned dx_get_block (struct dx_entry *entry); |
| static void dx_set_block (struct dx_entry *entry, unsigned value); |
| static inline unsigned dx_get_hash (struct dx_entry *entry); |
| static void dx_set_hash (struct dx_entry *entry, unsigned value); |
| static unsigned dx_get_count (struct dx_entry *entries); |
| static unsigned dx_get_limit (struct dx_entry *entries); |
| static void dx_set_count (struct dx_entry *entries, unsigned value); |
| static void dx_set_limit (struct dx_entry *entries, unsigned value); |
| static unsigned dx_root_limit (struct inode *dir, unsigned infosize); |
| static unsigned dx_node_limit (struct inode *dir); |
| static struct dx_frame *dx_probe(struct qstr *entry, |
| struct inode *dir, |
| struct dx_hash_info *hinfo, |
| struct dx_frame *frame, |
| int *err); |
| static void dx_release (struct dx_frame *frames); |
| static int dx_make_map(struct ext3_dir_entry_2 *de, unsigned blocksize, |
| struct dx_hash_info *hinfo, struct dx_map_entry map[]); |
| static void dx_sort_map(struct dx_map_entry *map, unsigned count); |
| static struct ext3_dir_entry_2 *dx_move_dirents (char *from, char *to, |
| struct dx_map_entry *offsets, int count); |
| static struct ext3_dir_entry_2 *dx_pack_dirents(char *base, unsigned blocksize); |
| static void dx_insert_block (struct dx_frame *frame, u32 hash, u32 block); |
| static int ext3_htree_next_block(struct inode *dir, __u32 hash, |
| struct dx_frame *frame, |
| struct dx_frame *frames, |
| __u32 *start_hash); |
| static struct buffer_head * ext3_dx_find_entry(struct inode *dir, |
| struct qstr *entry, struct ext3_dir_entry_2 **res_dir, |
| int *err); |
| static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry, |
| struct inode *inode); |
| |
| /* |
| * p is at least 6 bytes before the end of page |
| */ |
| static inline struct ext3_dir_entry_2 * |
| ext3_next_entry(struct ext3_dir_entry_2 *p) |
| { |
| return (struct ext3_dir_entry_2 *)((char *)p + |
| ext3_rec_len_from_disk(p->rec_len)); |
| } |
| |
| /* |
| * Future: use high four bits of block for coalesce-on-delete flags |
| * Mask them off for now. |
| */ |
| |
| static inline unsigned dx_get_block (struct dx_entry *entry) |
| { |
| return le32_to_cpu(entry->block) & 0x00ffffff; |
| } |
| |
| static inline void dx_set_block (struct dx_entry *entry, unsigned value) |
| { |
| entry->block = cpu_to_le32(value); |
| } |
| |
| static inline unsigned dx_get_hash (struct dx_entry *entry) |
| { |
| return le32_to_cpu(entry->hash); |
| } |
| |
| static inline void dx_set_hash (struct dx_entry *entry, unsigned value) |
| { |
| entry->hash = cpu_to_le32(value); |
| } |
| |
| static inline unsigned dx_get_count (struct dx_entry *entries) |
| { |
| return le16_to_cpu(((struct dx_countlimit *) entries)->count); |
| } |
| |
| static inline unsigned dx_get_limit (struct dx_entry *entries) |
| { |
| return le16_to_cpu(((struct dx_countlimit *) entries)->limit); |
| } |
| |
| static inline void dx_set_count (struct dx_entry *entries, unsigned value) |
| { |
| ((struct dx_countlimit *) entries)->count = cpu_to_le16(value); |
| } |
| |
| static inline void dx_set_limit (struct dx_entry *entries, unsigned value) |
| { |
| ((struct dx_countlimit *) entries)->limit = cpu_to_le16(value); |
| } |
| |
| static inline unsigned dx_root_limit (struct inode *dir, unsigned infosize) |
| { |
| unsigned entry_space = dir->i_sb->s_blocksize - EXT3_DIR_REC_LEN(1) - |
| EXT3_DIR_REC_LEN(2) - infosize; |
| return entry_space / sizeof(struct dx_entry); |
| } |
| |
| static inline unsigned dx_node_limit (struct inode *dir) |
| { |
| unsigned entry_space = dir->i_sb->s_blocksize - EXT3_DIR_REC_LEN(0); |
| return entry_space / sizeof(struct dx_entry); |
| } |
| |
| /* |
| * Debug |
| */ |
| #ifdef DX_DEBUG |
| static void dx_show_index (char * label, struct dx_entry *entries) |
| { |
| int i, n = dx_get_count (entries); |
| printk("%s index ", label); |
| for (i = 0; i < n; i++) |
| { |
| printk("%x->%u ", i? dx_get_hash(entries + i): 0, dx_get_block(entries + i)); |
| } |
| printk("\n"); |
| } |
| |
| struct stats |
| { |
| unsigned names; |
| unsigned space; |
| unsigned bcount; |
| }; |
| |
| static struct stats dx_show_leaf(struct dx_hash_info *hinfo, struct ext3_dir_entry_2 *de, |
| int size, int show_names) |
| { |
| unsigned names = 0, space = 0; |
| char *base = (char *) de; |
| struct dx_hash_info h = *hinfo; |
| |
| printk("names: "); |
| while ((char *) de < base + size) |
| { |
| if (de->inode) |
| { |
| if (show_names) |
| { |
| int len = de->name_len; |
| char *name = de->name; |
| while (len--) printk("%c", *name++); |
| ext3fs_dirhash(de->name, de->name_len, &h); |
| printk(":%x.%u ", h.hash, |
| ((char *) de - base)); |
| } |
| space += EXT3_DIR_REC_LEN(de->name_len); |
| names++; |
| } |
| de = ext3_next_entry(de); |
| } |
| printk("(%i)\n", names); |
| return (struct stats) { names, space, 1 }; |
| } |
| |
| struct stats dx_show_entries(struct dx_hash_info *hinfo, struct inode *dir, |
| struct dx_entry *entries, int levels) |
| { |
| unsigned blocksize = dir->i_sb->s_blocksize; |
| unsigned count = dx_get_count (entries), names = 0, space = 0, i; |
| unsigned bcount = 0; |
| struct buffer_head *bh; |
| int err; |
| printk("%i indexed blocks...\n", count); |
| for (i = 0; i < count; i++, entries++) |
| { |
| u32 block = dx_get_block(entries), hash = i? dx_get_hash(entries): 0; |
| u32 range = i < count - 1? (dx_get_hash(entries + 1) - hash): ~hash; |
| struct stats stats; |
| printk("%s%3u:%03u hash %8x/%8x ",levels?"":" ", i, block, hash, range); |
| if (!(bh = ext3_bread (NULL,dir, block, 0,&err))) continue; |
| stats = levels? |
| dx_show_entries(hinfo, dir, ((struct dx_node *) bh->b_data)->entries, levels - 1): |
| dx_show_leaf(hinfo, (struct ext3_dir_entry_2 *) bh->b_data, blocksize, 0); |
| names += stats.names; |
| space += stats.space; |
| bcount += stats.bcount; |
| brelse (bh); |
| } |
| if (bcount) |
| printk("%snames %u, fullness %u (%u%%)\n", levels?"":" ", |
| names, space/bcount,(space/bcount)*100/blocksize); |
| return (struct stats) { names, space, bcount}; |
| } |
| #endif /* DX_DEBUG */ |
| |
| /* |
| * Probe for a directory leaf block to search. |
| * |
| * dx_probe can return ERR_BAD_DX_DIR, which means there was a format |
| * error in the directory index, and the caller should fall back to |
| * searching the directory normally. The callers of dx_probe **MUST** |
| * check for this error code, and make sure it never gets reflected |
| * back to userspace. |
| */ |
| static struct dx_frame * |
| dx_probe(struct qstr *entry, struct inode *dir, |
| struct dx_hash_info *hinfo, struct dx_frame *frame_in, int *err) |
| { |
| unsigned count, indirect; |
| struct dx_entry *at, *entries, *p, *q, *m; |
| struct dx_root *root; |
| struct buffer_head *bh; |
| struct dx_frame *frame = frame_in; |
| u32 hash; |
| |
| frame->bh = NULL; |
| if (!(bh = ext3_bread (NULL,dir, 0, 0, err))) |
| goto fail; |
| root = (struct dx_root *) bh->b_data; |
| if (root->info.hash_version != DX_HASH_TEA && |
| root->info.hash_version != DX_HASH_HALF_MD4 && |
| root->info.hash_version != DX_HASH_LEGACY) { |
| ext3_warning(dir->i_sb, __func__, |
| "Unrecognised inode hash code %d", |
| root->info.hash_version); |
| brelse(bh); |
| *err = ERR_BAD_DX_DIR; |
| goto fail; |
| } |
| hinfo->hash_version = root->info.hash_version; |
| if (hinfo->hash_version <= DX_HASH_TEA) |
| hinfo->hash_version += EXT3_SB(dir->i_sb)->s_hash_unsigned; |
| hinfo->seed = EXT3_SB(dir->i_sb)->s_hash_seed; |
| if (entry) |
| ext3fs_dirhash(entry->name, entry->len, hinfo); |
| hash = hinfo->hash; |
| |
| if (root->info.unused_flags & 1) { |
| ext3_warning(dir->i_sb, __func__, |
| "Unimplemented inode hash flags: %#06x", |
| root->info.unused_flags); |
| brelse(bh); |
| *err = ERR_BAD_DX_DIR; |
| goto fail; |
| } |
| |
| if ((indirect = root->info.indirect_levels) > 1) { |
| ext3_warning(dir->i_sb, __func__, |
| "Unimplemented inode hash depth: %#06x", |
| root->info.indirect_levels); |
| brelse(bh); |
| *err = ERR_BAD_DX_DIR; |
| goto fail; |
| } |
| |
| entries = (struct dx_entry *) (((char *)&root->info) + |
| root->info.info_length); |
| |
| if (dx_get_limit(entries) != dx_root_limit(dir, |
| root->info.info_length)) { |
| ext3_warning(dir->i_sb, __func__, |
| "dx entry: limit != root limit"); |
| brelse(bh); |
| *err = ERR_BAD_DX_DIR; |
| goto fail; |
| } |
| |
| dxtrace (printk("Look up %x", hash)); |
| while (1) |
| { |
| count = dx_get_count(entries); |
| if (!count || count > dx_get_limit(entries)) { |
| ext3_warning(dir->i_sb, __func__, |
| "dx entry: no count or count > limit"); |
| brelse(bh); |
| *err = ERR_BAD_DX_DIR; |
| goto fail2; |
| } |
| |
| p = entries + 1; |
| q = entries + count - 1; |
| while (p <= q) |
| { |
| m = p + (q - p)/2; |
| dxtrace(printk(".")); |
| if (dx_get_hash(m) > hash) |
| q = m - 1; |
| else |
| p = m + 1; |
| } |
| |
| if (0) // linear search cross check |
| { |
| unsigned n = count - 1; |
| at = entries; |
| while (n--) |
| { |
| dxtrace(printk(",")); |
| if (dx_get_hash(++at) > hash) |
| { |
| at--; |
| break; |
| } |
| } |
| assert (at == p - 1); |
| } |
| |
| at = p - 1; |
| dxtrace(printk(" %x->%u\n", at == entries? 0: dx_get_hash(at), dx_get_block(at))); |
| frame->bh = bh; |
| frame->entries = entries; |
| frame->at = at; |
| if (!indirect--) return frame; |
| if (!(bh = ext3_bread (NULL,dir, dx_get_block(at), 0, err))) |
| goto fail2; |
| at = entries = ((struct dx_node *) bh->b_data)->entries; |
| if (dx_get_limit(entries) != dx_node_limit (dir)) { |
| ext3_warning(dir->i_sb, __func__, |
| "dx entry: limit != node limit"); |
| brelse(bh); |
| *err = ERR_BAD_DX_DIR; |
| goto fail2; |
| } |
| frame++; |
| frame->bh = NULL; |
| } |
| fail2: |
| while (frame >= frame_in) { |
| brelse(frame->bh); |
| frame--; |
| } |
| fail: |
| if (*err == ERR_BAD_DX_DIR) |
| ext3_warning(dir->i_sb, __func__, |
| "Corrupt dir inode %ld, running e2fsck is " |
| "recommended.", dir->i_ino); |
| return NULL; |
| } |
| |
| static void dx_release (struct dx_frame *frames) |
| { |
| if (frames[0].bh == NULL) |
| return; |
| |
| if (((struct dx_root *) frames[0].bh->b_data)->info.indirect_levels) |
| brelse(frames[1].bh); |
| brelse(frames[0].bh); |
| } |
| |
| /* |
| * This function increments the frame pointer to search the next leaf |
| * block, and reads in the necessary intervening nodes if the search |
| * should be necessary. Whether or not the search is necessary is |
| * controlled by the hash parameter. If the hash value is even, then |
| * the search is only continued if the next block starts with that |
| * hash value. This is used if we are searching for a specific file. |
| * |
| * If the hash value is HASH_NB_ALWAYS, then always go to the next block. |
| * |
| * This function returns 1 if the caller should continue to search, |
| * or 0 if it should not. If there is an error reading one of the |
| * index blocks, it will a negative error code. |
| * |
| * If start_hash is non-null, it will be filled in with the starting |
| * hash of the next page. |
| */ |
| static int ext3_htree_next_block(struct inode *dir, __u32 hash, |
| struct dx_frame *frame, |
| struct dx_frame *frames, |
| __u32 *start_hash) |
| { |
| struct dx_frame *p; |
| struct buffer_head *bh; |
| int err, num_frames = 0; |
| __u32 bhash; |
| |
| p = frame; |
| /* |
| * Find the next leaf page by incrementing the frame pointer. |
| * If we run out of entries in the interior node, loop around and |
| * increment pointer in the parent node. When we break out of |
| * this loop, num_frames indicates the number of interior |
| * nodes need to be read. |
| */ |
| while (1) { |
| if (++(p->at) < p->entries + dx_get_count(p->entries)) |
| break; |
| if (p == frames) |
| return 0; |
| num_frames++; |
| p--; |
| } |
| |
| /* |
| * If the hash is 1, then continue only if the next page has a |
| * continuation hash of any value. This is used for readdir |
| * handling. Otherwise, check to see if the hash matches the |
| * desired contiuation hash. If it doesn't, return since |
| * there's no point to read in the successive index pages. |
| */ |
| bhash = dx_get_hash(p->at); |
| if (start_hash) |
| *start_hash = bhash; |
| if ((hash & 1) == 0) { |
| if ((bhash & ~1) != hash) |
| return 0; |
| } |
| /* |
| * If the hash is HASH_NB_ALWAYS, we always go to the next |
| * block so no check is necessary |
| */ |
| while (num_frames--) { |
| if (!(bh = ext3_bread(NULL, dir, dx_get_block(p->at), |
| 0, &err))) |
| return err; /* Failure */ |
| p++; |
| brelse (p->bh); |
| p->bh = bh; |
| p->at = p->entries = ((struct dx_node *) bh->b_data)->entries; |
| } |
| return 1; |
| } |
| |
| |
| /* |
| * This function fills a red-black tree with information from a |
| * directory block. It returns the number directory entries loaded |
| * into the tree. If there is an error it is returned in err. |
| */ |
| static int htree_dirblock_to_tree(struct file *dir_file, |
| struct inode *dir, int block, |
| struct dx_hash_info *hinfo, |
| __u32 start_hash, __u32 start_minor_hash) |
| { |
| struct buffer_head *bh; |
| struct ext3_dir_entry_2 *de, *top; |
| int err, count = 0; |
| |
| dxtrace(printk("In htree dirblock_to_tree: block %d\n", block)); |
| if (!(bh = ext3_bread (NULL, dir, block, 0, &err))) |
| return err; |
| |
| de = (struct ext3_dir_entry_2 *) bh->b_data; |
| top = (struct ext3_dir_entry_2 *) ((char *) de + |
| dir->i_sb->s_blocksize - |
| EXT3_DIR_REC_LEN(0)); |
| for (; de < top; de = ext3_next_entry(de)) { |
| if (!ext3_check_dir_entry("htree_dirblock_to_tree", dir, de, bh, |
| (block<<EXT3_BLOCK_SIZE_BITS(dir->i_sb)) |
| +((char *)de - bh->b_data))) { |
| /* On error, skip the f_pos to the next block. */ |
| dir_file->f_pos = (dir_file->f_pos | |
| (dir->i_sb->s_blocksize - 1)) + 1; |
| brelse (bh); |
| return count; |
| } |
| ext3fs_dirhash(de->name, de->name_len, hinfo); |
| if ((hinfo->hash < start_hash) || |
| ((hinfo->hash == start_hash) && |
| (hinfo->minor_hash < start_minor_hash))) |
| continue; |
| if (de->inode == 0) |
| continue; |
| if ((err = ext3_htree_store_dirent(dir_file, |
| hinfo->hash, hinfo->minor_hash, de)) != 0) { |
| brelse(bh); |
| return err; |
| } |
| count++; |
| } |
| brelse(bh); |
| return count; |
| } |
| |
| |
| /* |
| * This function fills a red-black tree with information from a |
| * directory. We start scanning the directory in hash order, starting |
| * at start_hash and start_minor_hash. |
| * |
| * This function returns the number of entries inserted into the tree, |
| * or a negative error code. |
| */ |
| int ext3_htree_fill_tree(struct file *dir_file, __u32 start_hash, |
| __u32 start_minor_hash, __u32 *next_hash) |
| { |
| struct dx_hash_info hinfo; |
| struct ext3_dir_entry_2 *de; |
| struct dx_frame frames[2], *frame; |
| struct inode *dir; |
| int block, err; |
| int count = 0; |
| int ret; |
| __u32 hashval; |
| |
| dxtrace(printk("In htree_fill_tree, start hash: %x:%x\n", start_hash, |
| start_minor_hash)); |
| dir = dir_file->f_path.dentry->d_inode; |
| if (!(EXT3_I(dir)->i_flags & EXT3_INDEX_FL)) { |
| hinfo.hash_version = EXT3_SB(dir->i_sb)->s_def_hash_version; |
| if (hinfo.hash_version <= DX_HASH_TEA) |
| hinfo.hash_version += |
| EXT3_SB(dir->i_sb)->s_hash_unsigned; |
| hinfo.seed = EXT3_SB(dir->i_sb)->s_hash_seed; |
| count = htree_dirblock_to_tree(dir_file, dir, 0, &hinfo, |
| start_hash, start_minor_hash); |
| *next_hash = ~0; |
| return count; |
| } |
| hinfo.hash = start_hash; |
| hinfo.minor_hash = 0; |
| frame = dx_probe(NULL, dir_file->f_path.dentry->d_inode, &hinfo, frames, &err); |
| if (!frame) |
| return err; |
| |
| /* Add '.' and '..' from the htree header */ |
| if (!start_hash && !start_minor_hash) { |
| de = (struct ext3_dir_entry_2 *) frames[0].bh->b_data; |
| if ((err = ext3_htree_store_dirent(dir_file, 0, 0, de)) != 0) |
| goto errout; |
| count++; |
| } |
| if (start_hash < 2 || (start_hash ==2 && start_minor_hash==0)) { |
| de = (struct ext3_dir_entry_2 *) frames[0].bh->b_data; |
| de = ext3_next_entry(de); |
| if ((err = ext3_htree_store_dirent(dir_file, 2, 0, de)) != 0) |
| goto errout; |
| count++; |
| } |
| |
| while (1) { |
| block = dx_get_block(frame->at); |
| ret = htree_dirblock_to_tree(dir_file, dir, block, &hinfo, |
| start_hash, start_minor_hash); |
| if (ret < 0) { |
| err = ret; |
| goto errout; |
| } |
| count += ret; |
| hashval = ~0; |
| ret = ext3_htree_next_block(dir, HASH_NB_ALWAYS, |
| frame, frames, &hashval); |
| *next_hash = hashval; |
| if (ret < 0) { |
| err = ret; |
| goto errout; |
| } |
| /* |
| * Stop if: (a) there are no more entries, or |
| * (b) we have inserted at least one entry and the |
| * next hash value is not a continuation |
| */ |
| if ((ret == 0) || |
| (count && ((hashval & 1) == 0))) |
| break; |
| } |
| dx_release(frames); |
| dxtrace(printk("Fill tree: returned %d entries, next hash: %x\n", |
| count, *next_hash)); |
| return count; |
| errout: |
| dx_release(frames); |
| return (err); |
| } |
| |
| |
| /* |
| * Directory block splitting, compacting |
| */ |
| |
| /* |
| * Create map of hash values, offsets, and sizes, stored at end of block. |
| * Returns number of entries mapped. |
| */ |
| static int dx_make_map(struct ext3_dir_entry_2 *de, unsigned blocksize, |
| struct dx_hash_info *hinfo, struct dx_map_entry *map_tail) |
| { |
| int count = 0; |
| char *base = (char *) de; |
| struct dx_hash_info h = *hinfo; |
| |
| while ((char *) de < base + blocksize) |
| { |
| if (de->name_len && de->inode) { |
| ext3fs_dirhash(de->name, de->name_len, &h); |
| map_tail--; |
| map_tail->hash = h.hash; |
| map_tail->offs = (u16) ((char *) de - base); |
| map_tail->size = le16_to_cpu(de->rec_len); |
| count++; |
| cond_resched(); |
| } |
| /* XXX: do we need to check rec_len == 0 case? -Chris */ |
| de = ext3_next_entry(de); |
| } |
| return count; |
| } |
| |
| /* Sort map by hash value */ |
| static void dx_sort_map (struct dx_map_entry *map, unsigned count) |
| { |
| struct dx_map_entry *p, *q, *top = map + count - 1; |
| int more; |
| /* Combsort until bubble sort doesn't suck */ |
| while (count > 2) |
| { |
| count = count*10/13; |
| if (count - 9 < 2) /* 9, 10 -> 11 */ |
| count = 11; |
| for (p = top, q = p - count; q >= map; p--, q--) |
| if (p->hash < q->hash) |
| swap(*p, *q); |
| } |
| /* Garden variety bubble sort */ |
| do { |
| more = 0; |
| q = top; |
| while (q-- > map) |
| { |
| if (q[1].hash >= q[0].hash) |
| continue; |
| swap(*(q+1), *q); |
| more = 1; |
| } |
| } while(more); |
| } |
| |
| static void dx_insert_block(struct dx_frame *frame, u32 hash, u32 block) |
| { |
| struct dx_entry *entries = frame->entries; |
| struct dx_entry *old = frame->at, *new = old + 1; |
| int count = dx_get_count(entries); |
| |
| assert(count < dx_get_limit(entries)); |
| assert(old < entries + count); |
| memmove(new + 1, new, (char *)(entries + count) - (char *)(new)); |
| dx_set_hash(new, hash); |
| dx_set_block(new, block); |
| dx_set_count(entries, count + 1); |
| } |
| |
| static void ext3_update_dx_flag(struct inode *inode) |
| { |
| if (!EXT3_HAS_COMPAT_FEATURE(inode->i_sb, |
| EXT3_FEATURE_COMPAT_DIR_INDEX)) |
| EXT3_I(inode)->i_flags &= ~EXT3_INDEX_FL; |
| } |
| |
| /* |
| * NOTE! unlike strncmp, ext3_match returns 1 for success, 0 for failure. |
| * |
| * `len <= EXT3_NAME_LEN' is guaranteed by caller. |
| * `de != NULL' is guaranteed by caller. |
| */ |
| static inline int ext3_match (int len, const char * const name, |
| struct ext3_dir_entry_2 * de) |
| { |
| if (len != de->name_len) |
| return 0; |
| if (!de->inode) |
| return 0; |
| return !memcmp(name, de->name, len); |
| } |
| |
| /* |
| * Returns 0 if not found, -1 on failure, and 1 on success |
| */ |
| static inline int search_dirblock(struct buffer_head * bh, |
| struct inode *dir, |
| struct qstr *child, |
| unsigned long offset, |
| struct ext3_dir_entry_2 ** res_dir) |
| { |
| struct ext3_dir_entry_2 * de; |
| char * dlimit; |
| int de_len; |
| const char *name = child->name; |
| int namelen = child->len; |
| |
| de = (struct ext3_dir_entry_2 *) bh->b_data; |
| dlimit = bh->b_data + dir->i_sb->s_blocksize; |
| while ((char *) de < dlimit) { |
| /* this code is executed quadratically often */ |
| /* do minimal checking `by hand' */ |
| |
| if ((char *) de + namelen <= dlimit && |
| ext3_match (namelen, name, de)) { |
| /* found a match - just to be sure, do a full check */ |
| if (!ext3_check_dir_entry("ext3_find_entry", |
| dir, de, bh, offset)) |
| return -1; |
| *res_dir = de; |
| return 1; |
| } |
| /* prevent looping on a bad block */ |
| de_len = ext3_rec_len_from_disk(de->rec_len); |
| if (de_len <= 0) |
| return -1; |
| offset += de_len; |
| de = (struct ext3_dir_entry_2 *) ((char *) de + de_len); |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * ext3_find_entry() |
| * |
| * finds an entry in the specified directory with the wanted name. It |
| * returns the cache buffer in which the entry was found, and the entry |
| * itself (as a parameter - res_dir). It does NOT read the inode of the |
| * entry - you'll have to do that yourself if you want to. |
| * |
| * The returned buffer_head has ->b_count elevated. The caller is expected |
| * to brelse() it when appropriate. |
| */ |
| static struct buffer_head *ext3_find_entry(struct inode *dir, |
| struct qstr *entry, |
| struct ext3_dir_entry_2 **res_dir) |
| { |
| struct super_block * sb; |
| struct buffer_head * bh_use[NAMEI_RA_SIZE]; |
| struct buffer_head * bh, *ret = NULL; |
| unsigned long start, block, b; |
| int ra_max = 0; /* Number of bh's in the readahead |
| buffer, bh_use[] */ |
| int ra_ptr = 0; /* Current index into readahead |
| buffer */ |
| int num = 0; |
| int nblocks, i, err; |
| int namelen; |
| |
| *res_dir = NULL; |
| sb = dir->i_sb; |
| namelen = entry->len; |
| if (namelen > EXT3_NAME_LEN) |
| return NULL; |
| if (is_dx(dir)) { |
| bh = ext3_dx_find_entry(dir, entry, res_dir, &err); |
| /* |
| * On success, or if the error was file not found, |
| * return. Otherwise, fall back to doing a search the |
| * old fashioned way. |
| */ |
| if (bh || (err != ERR_BAD_DX_DIR)) |
| return bh; |
| dxtrace(printk("ext3_find_entry: dx failed, falling back\n")); |
| } |
| nblocks = dir->i_size >> EXT3_BLOCK_SIZE_BITS(sb); |
| start = EXT3_I(dir)->i_dir_start_lookup; |
| if (start >= nblocks) |
| start = 0; |
| block = start; |
| restart: |
| do { |
| /* |
| * We deal with the read-ahead logic here. |
| */ |
| if (ra_ptr >= ra_max) { |
| /* Refill the readahead buffer */ |
| ra_ptr = 0; |
| b = block; |
| for (ra_max = 0; ra_max < NAMEI_RA_SIZE; ra_max++) { |
| /* |
| * Terminate if we reach the end of the |
| * directory and must wrap, or if our |
| * search has finished at this block. |
| */ |
| if (b >= nblocks || (num && block == start)) { |
| bh_use[ra_max] = NULL; |
| break; |
| } |
| num++; |
| bh = ext3_getblk(NULL, dir, b++, 0, &err); |
| bh_use[ra_max] = bh; |
| if (bh) |
| ll_rw_block(READ_META, 1, &bh); |
| } |
| } |
| if ((bh = bh_use[ra_ptr++]) == NULL) |
| goto next; |
| wait_on_buffer(bh); |
| if (!buffer_uptodate(bh)) { |
| /* read error, skip block & hope for the best */ |
| ext3_error(sb, __func__, "reading directory #%lu " |
| "offset %lu", dir->i_ino, block); |
| brelse(bh); |
| goto next; |
| } |
| i = search_dirblock(bh, dir, entry, |
| block << EXT3_BLOCK_SIZE_BITS(sb), res_dir); |
| if (i == 1) { |
| EXT3_I(dir)->i_dir_start_lookup = block; |
| ret = bh; |
| goto cleanup_and_exit; |
| } else { |
| brelse(bh); |
| if (i < 0) |
| goto cleanup_and_exit; |
| } |
| next: |
| if (++block >= nblocks) |
| block = 0; |
| } while (block != start); |
| |
| /* |
| * If the directory has grown while we were searching, then |
| * search the last part of the directory before giving up. |
| */ |
| block = nblocks; |
| nblocks = dir->i_size >> EXT3_BLOCK_SIZE_BITS(sb); |
| if (block < nblocks) { |
| start = 0; |
| goto restart; |
| } |
| |
| cleanup_and_exit: |
| /* Clean up the read-ahead blocks */ |
| for (; ra_ptr < ra_max; ra_ptr++) |
| brelse (bh_use[ra_ptr]); |
| return ret; |
| } |
| |
| static struct buffer_head * ext3_dx_find_entry(struct inode *dir, |
| struct qstr *entry, struct ext3_dir_entry_2 **res_dir, |
| int *err) |
| { |
| struct super_block * sb; |
| struct dx_hash_info hinfo; |
| u32 hash; |
| struct dx_frame frames[2], *frame; |
| struct ext3_dir_entry_2 *de, *top; |
| struct buffer_head *bh; |
| unsigned long block; |
| int retval; |
| int namelen = entry->len; |
| const u8 *name = entry->name; |
| |
| sb = dir->i_sb; |
| /* NFS may look up ".." - look at dx_root directory block */ |
| if (namelen > 2 || name[0] != '.'|| (namelen == 2 && name[1] != '.')) { |
| if (!(frame = dx_probe(entry, dir, &hinfo, frames, err))) |
| return NULL; |
| } else { |
| frame = frames; |
| frame->bh = NULL; /* for dx_release() */ |
| frame->at = (struct dx_entry *)frames; /* hack for zero entry*/ |
| dx_set_block(frame->at, 0); /* dx_root block is 0 */ |
| } |
| hash = hinfo.hash; |
| do { |
| block = dx_get_block(frame->at); |
| if (!(bh = ext3_bread (NULL,dir, block, 0, err))) |
| goto errout; |
| de = (struct ext3_dir_entry_2 *) bh->b_data; |
| top = (struct ext3_dir_entry_2 *) ((char *) de + sb->s_blocksize - |
| EXT3_DIR_REC_LEN(0)); |
| for (; de < top; de = ext3_next_entry(de)) { |
| int off = (block << EXT3_BLOCK_SIZE_BITS(sb)) |
| + ((char *) de - bh->b_data); |
| |
| if (!ext3_check_dir_entry(__func__, dir, de, bh, off)) { |
| brelse(bh); |
| *err = ERR_BAD_DX_DIR; |
| goto errout; |
| } |
| |
| if (ext3_match(namelen, name, de)) { |
| *res_dir = de; |
| dx_release(frames); |
| return bh; |
| } |
| } |
| brelse (bh); |
| /* Check to see if we should continue to search */ |
| retval = ext3_htree_next_block(dir, hash, frame, |
| frames, NULL); |
| if (retval < 0) { |
| ext3_warning(sb, __func__, |
| "error reading index page in directory #%lu", |
| dir->i_ino); |
| *err = retval; |
| goto errout; |
| } |
| } while (retval == 1); |
| |
| *err = -ENOENT; |
| errout: |
| dxtrace(printk("%s not found\n", name)); |
| dx_release (frames); |
| return NULL; |
| } |
| |
| static struct dentry *ext3_lookup(struct inode * dir, struct dentry *dentry, struct nameidata *nd) |
| { |
| struct inode * inode; |
| struct ext3_dir_entry_2 * de; |
| struct buffer_head * bh; |
| |
| if (dentry->d_name.len > EXT3_NAME_LEN) |
| return ERR_PTR(-ENAMETOOLONG); |
| |
| bh = ext3_find_entry(dir, &dentry->d_name, &de); |
| inode = NULL; |
| if (bh) { |
| unsigned long ino = le32_to_cpu(de->inode); |
| brelse (bh); |
| if (!ext3_valid_inum(dir->i_sb, ino)) { |
| ext3_error(dir->i_sb, "ext3_lookup", |
| "bad inode number: %lu", ino); |
| return ERR_PTR(-EIO); |
| } |
| inode = ext3_iget(dir->i_sb, ino); |
| if (unlikely(IS_ERR(inode))) { |
| if (PTR_ERR(inode) == -ESTALE) { |
| ext3_error(dir->i_sb, __func__, |
| "deleted inode referenced: %lu", |
| ino); |
| return ERR_PTR(-EIO); |
| } else { |
| return ERR_CAST(inode); |
| } |
| } |
| } |
| return d_splice_alias(inode, dentry); |
| } |
| |
| |
| struct dentry *ext3_get_parent(struct dentry *child) |
| { |
| unsigned long ino; |
| struct qstr dotdot = {.name = "..", .len = 2}; |
| struct ext3_dir_entry_2 * de; |
| struct buffer_head *bh; |
| |
| bh = ext3_find_entry(child->d_inode, &dotdot, &de); |
| if (!bh) |
| return ERR_PTR(-ENOENT); |
| ino = le32_to_cpu(de->inode); |
| brelse(bh); |
| |
| if (!ext3_valid_inum(child->d_inode->i_sb, ino)) { |
| ext3_error(child->d_inode->i_sb, "ext3_get_parent", |
| "bad inode number: %lu", ino); |
| return ERR_PTR(-EIO); |
| } |
| |
| return d_obtain_alias(ext3_iget(child->d_inode->i_sb, ino)); |
| } |
| |
| #define S_SHIFT 12 |
| static unsigned char ext3_type_by_mode[S_IFMT >> S_SHIFT] = { |
| [S_IFREG >> S_SHIFT] = EXT3_FT_REG_FILE, |
| [S_IFDIR >> S_SHIFT] = EXT3_FT_DIR, |
| [S_IFCHR >> S_SHIFT] = EXT3_FT_CHRDEV, |
| [S_IFBLK >> S_SHIFT] = EXT3_FT_BLKDEV, |
| [S_IFIFO >> S_SHIFT] = EXT3_FT_FIFO, |
| [S_IFSOCK >> S_SHIFT] = EXT3_FT_SOCK, |
| [S_IFLNK >> S_SHIFT] = EXT3_FT_SYMLINK, |
| }; |
| |
| static inline void ext3_set_de_type(struct super_block *sb, |
| struct ext3_dir_entry_2 *de, |
| umode_t mode) { |
| if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_FILETYPE)) |
| de->file_type = ext3_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; |
| } |
| |
| /* |
| * Move count entries from end of map between two memory locations. |
| * Returns pointer to last entry moved. |
| */ |
| static struct ext3_dir_entry_2 * |
| dx_move_dirents(char *from, char *to, struct dx_map_entry *map, int count) |
| { |
| unsigned rec_len = 0; |
| |
| while (count--) { |
| struct ext3_dir_entry_2 *de = (struct ext3_dir_entry_2 *) (from + map->offs); |
| rec_len = EXT3_DIR_REC_LEN(de->name_len); |
| memcpy (to, de, rec_len); |
| ((struct ext3_dir_entry_2 *) to)->rec_len = |
| ext3_rec_len_to_disk(rec_len); |
| de->inode = 0; |
| map++; |
| to += rec_len; |
| } |
| return (struct ext3_dir_entry_2 *) (to - rec_len); |
| } |
| |
| /* |
| * Compact each dir entry in the range to the minimal rec_len. |
| * Returns pointer to last entry in range. |
| */ |
| static struct ext3_dir_entry_2 *dx_pack_dirents(char *base, unsigned blocksize) |
| { |
| struct ext3_dir_entry_2 *next, *to, *prev; |
| struct ext3_dir_entry_2 *de = (struct ext3_dir_entry_2 *)base; |
| unsigned rec_len = 0; |
| |
| prev = to = de; |
| while ((char *)de < base + blocksize) { |
| next = ext3_next_entry(de); |
| if (de->inode && de->name_len) { |
| rec_len = EXT3_DIR_REC_LEN(de->name_len); |
| if (de > to) |
| memmove(to, de, rec_len); |
| to->rec_len = ext3_rec_len_to_disk(rec_len); |
| prev = to; |
| to = (struct ext3_dir_entry_2 *) (((char *) to) + rec_len); |
| } |
| de = next; |
| } |
| return prev; |
| } |
| |
| /* |
| * Split a full leaf block to make room for a new dir entry. |
| * Allocate a new block, and move entries so that they are approx. equally full. |
| * Returns pointer to de in block into which the new entry will be inserted. |
| */ |
| static struct ext3_dir_entry_2 *do_split(handle_t *handle, struct inode *dir, |
| struct buffer_head **bh,struct dx_frame *frame, |
| struct dx_hash_info *hinfo, int *error) |
| { |
| unsigned blocksize = dir->i_sb->s_blocksize; |
| unsigned count, continued; |
| struct buffer_head *bh2; |
| u32 newblock; |
| u32 hash2; |
| struct dx_map_entry *map; |
| char *data1 = (*bh)->b_data, *data2; |
| unsigned split, move, size; |
| struct ext3_dir_entry_2 *de = NULL, *de2; |
| int err = 0, i; |
| |
| bh2 = ext3_append (handle, dir, &newblock, &err); |
| if (!(bh2)) { |
| brelse(*bh); |
| *bh = NULL; |
| goto errout; |
| } |
| |
| BUFFER_TRACE(*bh, "get_write_access"); |
| err = ext3_journal_get_write_access(handle, *bh); |
| if (err) |
| goto journal_error; |
| |
| BUFFER_TRACE(frame->bh, "get_write_access"); |
| err = ext3_journal_get_write_access(handle, frame->bh); |
| if (err) |
| goto journal_error; |
| |
| data2 = bh2->b_data; |
| |
| /* create map in the end of data2 block */ |
| map = (struct dx_map_entry *) (data2 + blocksize); |
| count = dx_make_map ((struct ext3_dir_entry_2 *) data1, |
| blocksize, hinfo, map); |
| map -= count; |
| dx_sort_map (map, count); |
| /* Split the existing block in the middle, size-wise */ |
| size = 0; |
| move = 0; |
| for (i = count-1; i >= 0; i--) { |
| /* is more than half of this entry in 2nd half of the block? */ |
| if (size + map[i].size/2 > blocksize/2) |
| break; |
| size += map[i].size; |
| move++; |
| } |
| /* map index at which we will split */ |
| split = count - move; |
| hash2 = map[split].hash; |
| continued = hash2 == map[split - 1].hash; |
| dxtrace(printk("Split block %i at %x, %i/%i\n", |
| dx_get_block(frame->at), hash2, split, count-split)); |
| |
| /* Fancy dance to stay within two buffers */ |
| de2 = dx_move_dirents(data1, data2, map + split, count - split); |
| de = dx_pack_dirents(data1,blocksize); |
| de->rec_len = ext3_rec_len_to_disk(data1 + blocksize - (char *) de); |
| de2->rec_len = ext3_rec_len_to_disk(data2 + blocksize - (char *) de2); |
| dxtrace(dx_show_leaf (hinfo, (struct ext3_dir_entry_2 *) data1, blocksize, 1)); |
| dxtrace(dx_show_leaf (hinfo, (struct ext3_dir_entry_2 *) data2, blocksize, 1)); |
| |
| /* Which block gets the new entry? */ |
| if (hinfo->hash >= hash2) |
| { |
| swap(*bh, bh2); |
| de = de2; |
| } |
| dx_insert_block (frame, hash2 + continued, newblock); |
| err = ext3_journal_dirty_metadata (handle, bh2); |
| if (err) |
| goto journal_error; |
| err = ext3_journal_dirty_metadata (handle, frame->bh); |
| if (err) |
| goto journal_error; |
| brelse (bh2); |
| dxtrace(dx_show_index ("frame", frame->entries)); |
| return de; |
| |
| journal_error: |
| brelse(*bh); |
| brelse(bh2); |
| *bh = NULL; |
| ext3_std_error(dir->i_sb, err); |
| errout: |
| *error = err; |
| return NULL; |
| } |
| |
| |
| /* |
| * Add a new entry into a directory (leaf) block. If de is non-NULL, |
| * it points to a directory entry which is guaranteed to be large |
| * enough for new directory entry. If de is NULL, then |
| * add_dirent_to_buf will attempt search the directory block for |
| * space. It will return -ENOSPC if no space is available, and -EIO |
| * and -EEXIST if directory entry already exists. |
| * |
| * NOTE! bh is NOT released in the case where ENOSPC is returned. In |
| * all other cases bh is released. |
| */ |
| static int add_dirent_to_buf(handle_t *handle, struct dentry *dentry, |
| struct inode *inode, struct ext3_dir_entry_2 *de, |
| struct buffer_head * bh) |
| { |
| struct inode *dir = dentry->d_parent->d_inode; |
| const char *name = dentry->d_name.name; |
| int namelen = dentry->d_name.len; |
| unsigned long offset = 0; |
| unsigned short reclen; |
| int nlen, rlen, err; |
| char *top; |
| |
| reclen = EXT3_DIR_REC_LEN(namelen); |
| if (!de) { |
| de = (struct ext3_dir_entry_2 *)bh->b_data; |
| top = bh->b_data + dir->i_sb->s_blocksize - reclen; |
| while ((char *) de <= top) { |
| if (!ext3_check_dir_entry("ext3_add_entry", dir, de, |
| bh, offset)) { |
| brelse (bh); |
| return -EIO; |
| } |
| if (ext3_match (namelen, name, de)) { |
| brelse (bh); |
| return -EEXIST; |
| } |
| nlen = EXT3_DIR_REC_LEN(de->name_len); |
| rlen = ext3_rec_len_from_disk(de->rec_len); |
| if ((de->inode? rlen - nlen: rlen) >= reclen) |
| break; |
| de = (struct ext3_dir_entry_2 *)((char *)de + rlen); |
| offset += rlen; |
| } |
| if ((char *) de > top) |
| return -ENOSPC; |
| } |
| BUFFER_TRACE(bh, "get_write_access"); |
| err = ext3_journal_get_write_access(handle, bh); |
| if (err) { |
| ext3_std_error(dir->i_sb, err); |
| brelse(bh); |
| return err; |
| } |
| |
| /* By now the buffer is marked for journaling */ |
| nlen = EXT3_DIR_REC_LEN(de->name_len); |
| rlen = ext3_rec_len_from_disk(de->rec_len); |
| if (de->inode) { |
| struct ext3_dir_entry_2 *de1 = (struct ext3_dir_entry_2 *)((char *)de + nlen); |
| de1->rec_len = ext3_rec_len_to_disk(rlen - nlen); |
| de->rec_len = ext3_rec_len_to_disk(nlen); |
| de = de1; |
| } |
| de->file_type = EXT3_FT_UNKNOWN; |
| if (inode) { |
| de->inode = cpu_to_le32(inode->i_ino); |
| ext3_set_de_type(dir->i_sb, de, inode->i_mode); |
| } else |
| de->inode = 0; |
| de->name_len = namelen; |
| memcpy (de->name, name, namelen); |
| /* |
| * XXX shouldn't update any times until successful |
| * completion of syscall, but too many callers depend |
| * on this. |
| * |
| * XXX similarly, too many callers depend on |
| * ext3_new_inode() setting the times, but error |
| * recovery deletes the inode, so the worst that can |
| * happen is that the times are slightly out of date |
| * and/or different from the directory change time. |
| */ |
| dir->i_mtime = dir->i_ctime = CURRENT_TIME_SEC; |
| ext3_update_dx_flag(dir); |
| dir->i_version++; |
| ext3_mark_inode_dirty(handle, dir); |
| BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); |
| err = ext3_journal_dirty_metadata(handle, bh); |
| if (err) |
| ext3_std_error(dir->i_sb, err); |
| brelse(bh); |
| return 0; |
| } |
| |
| /* |
| * This converts a one block unindexed directory to a 3 block indexed |
| * directory, and adds the dentry to the indexed directory. |
| */ |
| static int make_indexed_dir(handle_t *handle, struct dentry *dentry, |
| struct inode *inode, struct buffer_head *bh) |
| { |
| struct inode *dir = dentry->d_parent->d_inode; |
| const char *name = dentry->d_name.name; |
| int namelen = dentry->d_name.len; |
| struct buffer_head *bh2; |
| struct dx_root *root; |
| struct dx_frame frames[2], *frame; |
| struct dx_entry *entries; |
| struct ext3_dir_entry_2 *de, *de2; |
| char *data1, *top; |
| unsigned len; |
| int retval; |
| unsigned blocksize; |
| struct dx_hash_info hinfo; |
| u32 block; |
| struct fake_dirent *fde; |
| |
| blocksize = dir->i_sb->s_blocksize; |
| dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino)); |
| retval = ext3_journal_get_write_access(handle, bh); |
| if (retval) { |
| ext3_std_error(dir->i_sb, retval); |
| brelse(bh); |
| return retval; |
| } |
| root = (struct dx_root *) bh->b_data; |
| |
| /* The 0th block becomes the root, move the dirents out */ |
| fde = &root->dotdot; |
| de = (struct ext3_dir_entry_2 *)((char *)fde + |
| ext3_rec_len_from_disk(fde->rec_len)); |
| if ((char *) de >= (((char *) root) + blocksize)) { |
| ext3_error(dir->i_sb, __func__, |
| "invalid rec_len for '..' in inode %lu", |
| dir->i_ino); |
| brelse(bh); |
| return -EIO; |
| } |
| len = ((char *) root) + blocksize - (char *) de; |
| |
| bh2 = ext3_append (handle, dir, &block, &retval); |
| if (!(bh2)) { |
| brelse(bh); |
| return retval; |
| } |
| EXT3_I(dir)->i_flags |= EXT3_INDEX_FL; |
| data1 = bh2->b_data; |
| |
| memcpy (data1, de, len); |
| de = (struct ext3_dir_entry_2 *) data1; |
| top = data1 + len; |
| while ((char *)(de2 = ext3_next_entry(de)) < top) |
| de = de2; |
| de->rec_len = ext3_rec_len_to_disk(data1 + blocksize - (char *) de); |
| /* Initialize the root; the dot dirents already exist */ |
| de = (struct ext3_dir_entry_2 *) (&root->dotdot); |
| de->rec_len = ext3_rec_len_to_disk(blocksize - EXT3_DIR_REC_LEN(2)); |
| memset (&root->info, 0, sizeof(root->info)); |
| root->info.info_length = sizeof(root->info); |
| root->info.hash_version = EXT3_SB(dir->i_sb)->s_def_hash_version; |
| entries = root->entries; |
| dx_set_block (entries, 1); |
| dx_set_count (entries, 1); |
| dx_set_limit (entries, dx_root_limit(dir, sizeof(root->info))); |
| |
| /* Initialize as for dx_probe */ |
| hinfo.hash_version = root->info.hash_version; |
| if (hinfo.hash_version <= DX_HASH_TEA) |
| hinfo.hash_version += EXT3_SB(dir->i_sb)->s_hash_unsigned; |
| hinfo.seed = EXT3_SB(dir->i_sb)->s_hash_seed; |
| ext3fs_dirhash(name, namelen, &hinfo); |
| frame = frames; |
| frame->entries = entries; |
| frame->at = entries; |
| frame->bh = bh; |
| bh = bh2; |
| de = do_split(handle,dir, &bh, frame, &hinfo, &retval); |
| dx_release (frames); |
| if (!(de)) |
| return retval; |
| |
| return add_dirent_to_buf(handle, dentry, inode, de, bh); |
| } |
| |
| /* |
| * ext3_add_entry() |
| * |
| * adds a file entry to the specified directory, using the same |
| * semantics as ext3_find_entry(). It returns NULL if it failed. |
| * |
| * NOTE!! The inode part of 'de' is left at 0 - which means you |
| * may not sleep between calling this and putting something into |
| * the entry, as someone else might have used it while you slept. |
| */ |
| static int ext3_add_entry (handle_t *handle, struct dentry *dentry, |
| struct inode *inode) |
| { |
| struct inode *dir = dentry->d_parent->d_inode; |
| unsigned long offset; |
| struct buffer_head * bh; |
| struct ext3_dir_entry_2 *de; |
| struct super_block * sb; |
| int retval; |
| int dx_fallback=0; |
| unsigned blocksize; |
| u32 block, blocks; |
| |
| sb = dir->i_sb; |
| blocksize = sb->s_blocksize; |
| if (!dentry->d_name.len) |
| return -EINVAL; |
| if (is_dx(dir)) { |
| retval = ext3_dx_add_entry(handle, dentry, inode); |
| if (!retval || (retval != ERR_BAD_DX_DIR)) |
| return retval; |
| EXT3_I(dir)->i_flags &= ~EXT3_INDEX_FL; |
| dx_fallback++; |
| ext3_mark_inode_dirty(handle, dir); |
| } |
| blocks = dir->i_size >> sb->s_blocksize_bits; |
| for (block = 0, offset = 0; block < blocks; block++) { |
| bh = ext3_bread(handle, dir, block, 0, &retval); |
| if(!bh) |
| return retval; |
| retval = add_dirent_to_buf(handle, dentry, inode, NULL, bh); |
| if (retval != -ENOSPC) |
| return retval; |
| |
| if (blocks == 1 && !dx_fallback && |
| EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_DIR_INDEX)) |
| return make_indexed_dir(handle, dentry, inode, bh); |
| brelse(bh); |
| } |
| bh = ext3_append(handle, dir, &block, &retval); |
| if (!bh) |
| return retval; |
| de = (struct ext3_dir_entry_2 *) bh->b_data; |
| de->inode = 0; |
| de->rec_len = ext3_rec_len_to_disk(blocksize); |
| return add_dirent_to_buf(handle, dentry, inode, de, bh); |
| } |
| |
| /* |
| * Returns 0 for success, or a negative error value |
| */ |
| static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry, |
| struct inode *inode) |
| { |
| struct dx_frame frames[2], *frame; |
| struct dx_entry *entries, *at; |
| struct dx_hash_info hinfo; |
| struct buffer_head * bh; |
| struct inode *dir = dentry->d_parent->d_inode; |
| struct super_block * sb = dir->i_sb; |
| struct ext3_dir_entry_2 *de; |
| int err; |
| |
| frame = dx_probe(&dentry->d_name, dir, &hinfo, frames, &err); |
| if (!frame) |
| return err; |
| entries = frame->entries; |
| at = frame->at; |
| |
| if (!(bh = ext3_bread(handle,dir, dx_get_block(frame->at), 0, &err))) |
| goto cleanup; |
| |
| BUFFER_TRACE(bh, "get_write_access"); |
| err = ext3_journal_get_write_access(handle, bh); |
| if (err) |
| goto journal_error; |
| |
| err = add_dirent_to_buf(handle, dentry, inode, NULL, bh); |
| if (err != -ENOSPC) { |
| bh = NULL; |
| goto cleanup; |
| } |
| |
| /* Block full, should compress but for now just split */ |
| dxtrace(printk("using %u of %u node entries\n", |
| dx_get_count(entries), dx_get_limit(entries))); |
| /* Need to split index? */ |
| if (dx_get_count(entries) == dx_get_limit(entries)) { |
| u32 newblock; |
| unsigned icount = dx_get_count(entries); |
| int levels = frame - frames; |
| struct dx_entry *entries2; |
| struct dx_node *node2; |
| struct buffer_head *bh2; |
| |
| if (levels && (dx_get_count(frames->entries) == |
| dx_get_limit(frames->entries))) { |
| ext3_warning(sb, __func__, |
| "Directory index full!"); |
| err = -ENOSPC; |
| goto cleanup; |
| } |
| bh2 = ext3_append (handle, dir, &newblock, &err); |
| if (!(bh2)) |
| goto cleanup; |
| node2 = (struct dx_node *)(bh2->b_data); |
| entries2 = node2->entries; |
| node2->fake.rec_len = ext3_rec_len_to_disk(sb->s_blocksize); |
| node2->fake.inode = 0; |
| BUFFER_TRACE(frame->bh, "get_write_access"); |
| err = ext3_journal_get_write_access(handle, frame->bh); |
| if (err) |
| goto journal_error; |
| if (levels) { |
| unsigned icount1 = icount/2, icount2 = icount - icount1; |
| unsigned hash2 = dx_get_hash(entries + icount1); |
| dxtrace(printk("Split index %i/%i\n", icount1, icount2)); |
| |
| BUFFER_TRACE(frame->bh, "get_write_access"); /* index root */ |
| err = ext3_journal_get_write_access(handle, |
| frames[0].bh); |
| if (err) |
| goto journal_error; |
| |
| memcpy ((char *) entries2, (char *) (entries + icount1), |
| icount2 * sizeof(struct dx_entry)); |
| dx_set_count (entries, icount1); |
| dx_set_count (entries2, icount2); |
| dx_set_limit (entries2, dx_node_limit(dir)); |
| |
| /* Which index block gets the new entry? */ |
| if (at - entries >= icount1) { |
| frame->at = at = at - entries - icount1 + entries2; |
| frame->entries = entries = entries2; |
| swap(frame->bh, bh2); |
| } |
| dx_insert_block (frames + 0, hash2, newblock); |
| dxtrace(dx_show_index ("node", frames[1].entries)); |
| dxtrace(dx_show_index ("node", |
| ((struct dx_node *) bh2->b_data)->entries)); |
| err = ext3_journal_dirty_metadata(handle, bh2); |
| if (err) |
| goto journal_error; |
| brelse (bh2); |
| } else { |
| dxtrace(printk("Creating second level index...\n")); |
| memcpy((char *) entries2, (char *) entries, |
| icount * sizeof(struct dx_entry)); |
| dx_set_limit(entries2, dx_node_limit(dir)); |
| |
| /* Set up root */ |
| dx_set_count(entries, 1); |
| dx_set_block(entries + 0, newblock); |
| ((struct dx_root *) frames[0].bh->b_data)->info.indirect_levels = 1; |
| |
| /* Add new access path frame */ |
| frame = frames + 1; |
| frame->at = at = at - entries + entries2; |
| frame->entries = entries = entries2; |
| frame->bh = bh2; |
| err = ext3_journal_get_write_access(handle, |
| frame->bh); |
| if (err) |
| goto journal_error; |
| } |
| ext3_journal_dirty_metadata(handle, frames[0].bh); |
| } |
| de = do_split(handle, dir, &bh, frame, &hinfo, &err); |
| if (!de) |
| goto cleanup; |
| err = add_dirent_to_buf(handle, dentry, inode, de, bh); |
| bh = NULL; |
| goto cleanup; |
| |
| journal_error: |
| ext3_std_error(dir->i_sb, err); |
| cleanup: |
| if (bh) |
| brelse(bh); |
| dx_release(frames); |
| return err; |
| } |
| |
| /* |
| * ext3_delete_entry deletes a directory entry by merging it with the |
| * previous entry |
| */ |
| static int ext3_delete_entry (handle_t *handle, |
| struct inode * dir, |
| struct ext3_dir_entry_2 * de_del, |
| struct buffer_head * bh) |
| { |
| struct ext3_dir_entry_2 * de, * pde; |
| int i; |
| |
| i = 0; |
| pde = NULL; |
| de = (struct ext3_dir_entry_2 *) bh->b_data; |
| while (i < bh->b_size) { |
| if (!ext3_check_dir_entry("ext3_delete_entry", dir, de, bh, i)) |
| return -EIO; |
| if (de == de_del) { |
| BUFFER_TRACE(bh, "get_write_access"); |
| ext3_journal_get_write_access(handle, bh); |
| if (pde) |
| pde->rec_len = ext3_rec_len_to_disk( |
| ext3_rec_len_from_disk(pde->rec_len) + |
| ext3_rec_len_from_disk(de->rec_len)); |
| else |
| de->inode = 0; |
| dir->i_version++; |
| BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); |
| ext3_journal_dirty_metadata(handle, bh); |
| return 0; |
| } |
| i += ext3_rec_len_from_disk(de->rec_len); |
| pde = de; |
| de = ext3_next_entry(de); |
| } |
| return -ENOENT; |
| } |
| |
| static int ext3_add_nondir(handle_t *handle, |
| struct dentry *dentry, struct inode *inode) |
| { |
| int err = ext3_add_entry(handle, dentry, inode); |
| if (!err) { |
| ext3_mark_inode_dirty(handle, inode); |
| d_instantiate(dentry, inode); |
| unlock_new_inode(inode); |
| return 0; |
| } |
| drop_nlink(inode); |
| unlock_new_inode(inode); |
| iput(inode); |
| return err; |
| } |
| |
| /* |
| * By the time this is called, we already have created |
| * the directory cache entry for the new file, but it |
| * is so far negative - it has no inode. |
| * |
| * If the create succeeds, we fill in the inode information |
| * with d_instantiate(). |
| */ |
| static int ext3_create (struct inode * dir, struct dentry * dentry, int mode, |
| struct nameidata *nd) |
| { |
| handle_t *handle; |
| struct inode * inode; |
| int err, retries = 0; |
| |
| retry: |
| handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + |
| EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + |
| EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| |
| if (IS_DIRSYNC(dir)) |
| handle->h_sync = 1; |
| |
| inode = ext3_new_inode (handle, dir, mode); |
| err = PTR_ERR(inode); |
| if (!IS_ERR(inode)) { |
| inode->i_op = &ext3_file_inode_operations; |
| inode->i_fop = &ext3_file_operations; |
| ext3_set_aops(inode); |
| err = ext3_add_nondir(handle, dentry, inode); |
| } |
| ext3_journal_stop(handle); |
| if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) |
| goto retry; |
| return err; |
| } |
| |
| static int ext3_mknod (struct inode * dir, struct dentry *dentry, |
| int mode, dev_t rdev) |
| { |
| handle_t *handle; |
| struct inode *inode; |
| int err, retries = 0; |
| |
| if (!new_valid_dev(rdev)) |
| return -EINVAL; |
| |
| retry: |
| handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + |
| EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + |
| EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| |
| if (IS_DIRSYNC(dir)) |
| handle->h_sync = 1; |
| |
| inode = ext3_new_inode (handle, dir, mode); |
| err = PTR_ERR(inode); |
| if (!IS_ERR(inode)) { |
| init_special_inode(inode, inode->i_mode, rdev); |
| #ifdef CONFIG_EXT3_FS_XATTR |
| inode->i_op = &ext3_special_inode_operations; |
| #endif |
| err = ext3_add_nondir(handle, dentry, inode); |
| } |
| ext3_journal_stop(handle); |
| if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) |
| goto retry; |
| return err; |
| } |
| |
| static int ext3_mkdir(struct inode * dir, struct dentry * dentry, int mode) |
| { |
| handle_t *handle; |
| struct inode * inode; |
| struct buffer_head * dir_block; |
| struct ext3_dir_entry_2 * de; |
| int err, retries = 0; |
| |
| if (dir->i_nlink >= EXT3_LINK_MAX) |
| return -EMLINK; |
| |
| retry: |
| handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + |
| EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + |
| EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| |
| if (IS_DIRSYNC(dir)) |
| handle->h_sync = 1; |
| |
| inode = ext3_new_inode (handle, dir, S_IFDIR | mode); |
| err = PTR_ERR(inode); |
| if (IS_ERR(inode)) |
| goto out_stop; |
| |
| inode->i_op = &ext3_dir_inode_operations; |
| inode->i_fop = &ext3_dir_operations; |
| inode->i_size = EXT3_I(inode)->i_disksize = inode->i_sb->s_blocksize; |
| dir_block = ext3_bread (handle, inode, 0, 1, &err); |
| if (!dir_block) { |
| drop_nlink(inode); /* is this nlink == 0? */ |
| unlock_new_inode(inode); |
| ext3_mark_inode_dirty(handle, inode); |
| iput (inode); |
| goto out_stop; |
| } |
| BUFFER_TRACE(dir_block, "get_write_access"); |
| ext3_journal_get_write_access(handle, dir_block); |
| de = (struct ext3_dir_entry_2 *) dir_block->b_data; |
| de->inode = cpu_to_le32(inode->i_ino); |
| de->name_len = 1; |
| de->rec_len = ext3_rec_len_to_disk(EXT3_DIR_REC_LEN(de->name_len)); |
| strcpy (de->name, "."); |
| ext3_set_de_type(dir->i_sb, de, S_IFDIR); |
| de = ext3_next_entry(de); |
| de->inode = cpu_to_le32(dir->i_ino); |
| de->rec_len = ext3_rec_len_to_disk(inode->i_sb->s_blocksize - |
| EXT3_DIR_REC_LEN(1)); |
| de->name_len = 2; |
| strcpy (de->name, ".."); |
| ext3_set_de_type(dir->i_sb, de, S_IFDIR); |
| inode->i_nlink = 2; |
| BUFFER_TRACE(dir_block, "call ext3_journal_dirty_metadata"); |
| ext3_journal_dirty_metadata(handle, dir_block); |
| brelse (dir_block); |
| ext3_mark_inode_dirty(handle, inode); |
| err = ext3_add_entry (handle, dentry, inode); |
| if (err) { |
| inode->i_nlink = 0; |
| unlock_new_inode(inode); |
| ext3_mark_inode_dirty(handle, inode); |
| iput (inode); |
| goto out_stop; |
| } |
| inc_nlink(dir); |
| ext3_update_dx_flag(dir); |
| ext3_mark_inode_dirty(handle, dir); |
| d_instantiate(dentry, inode); |
| unlock_new_inode(inode); |
| out_stop: |
| ext3_journal_stop(handle); |
| if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) |
| goto retry; |
| return err; |
| } |
| |
| /* |
| * routine to check that the specified directory is empty (for rmdir) |
| */ |
| static int empty_dir (struct inode * inode) |
| { |
| unsigned long offset; |
| struct buffer_head * bh; |
| struct ext3_dir_entry_2 * de, * de1; |
| struct super_block * sb; |
| int err = 0; |
| |
| sb = inode->i_sb; |
| if (inode->i_size < EXT3_DIR_REC_LEN(1) + EXT3_DIR_REC_LEN(2) || |
| !(bh = ext3_bread (NULL, inode, 0, 0, &err))) { |
| if (err) |
| ext3_error(inode->i_sb, __func__, |
| "error %d reading directory #%lu offset 0", |
| err, inode->i_ino); |
| else |
| ext3_warning(inode->i_sb, __func__, |
| "bad directory (dir #%lu) - no data block", |
| inode->i_ino); |
| return 1; |
| } |
| de = (struct ext3_dir_entry_2 *) bh->b_data; |
| de1 = ext3_next_entry(de); |
| if (le32_to_cpu(de->inode) != inode->i_ino || |
| !le32_to_cpu(de1->inode) || |
| strcmp (".", de->name) || |
| strcmp ("..", de1->name)) { |
| ext3_warning (inode->i_sb, "empty_dir", |
| "bad directory (dir #%lu) - no `.' or `..'", |
| inode->i_ino); |
| brelse (bh); |
| return 1; |
| } |
| offset = ext3_rec_len_from_disk(de->rec_len) + |
| ext3_rec_len_from_disk(de1->rec_len); |
| de = ext3_next_entry(de1); |
| while (offset < inode->i_size ) { |
| if (!bh || |
| (void *) de >= (void *) (bh->b_data+sb->s_blocksize)) { |
| err = 0; |
| brelse (bh); |
| bh = ext3_bread (NULL, inode, |
| offset >> EXT3_BLOCK_SIZE_BITS(sb), 0, &err); |
| if (!bh) { |
| if (err) |
| ext3_error(sb, __func__, |
| "error %d reading directory" |
| " #%lu offset %lu", |
| err, inode->i_ino, offset); |
| offset += sb->s_blocksize; |
| continue; |
| } |
| de = (struct ext3_dir_entry_2 *) bh->b_data; |
| } |
| if (!ext3_check_dir_entry("empty_dir", inode, de, bh, offset)) { |
| de = (struct ext3_dir_entry_2 *)(bh->b_data + |
| sb->s_blocksize); |
| offset = (offset | (sb->s_blocksize - 1)) + 1; |
| continue; |
| } |
| if (le32_to_cpu(de->inode)) { |
| brelse (bh); |
| return 0; |
| } |
| offset += ext3_rec_len_from_disk(de->rec_len); |
| de = ext3_next_entry(de); |
| } |
| brelse (bh); |
| return 1; |
| } |
| |
| /* ext3_orphan_add() links an unlinked or truncated inode into a list of |
| * such inodes, starting at the superblock, in case we crash before the |
| * file is closed/deleted, or in case the inode truncate spans multiple |
| * transactions and the last transaction is not recovered after a crash. |
| * |
| * At filesystem recovery time, we walk this list deleting unlinked |
| * inodes and truncating linked inodes in ext3_orphan_cleanup(). |
| */ |
| int ext3_orphan_add(handle_t *handle, struct inode *inode) |
| { |
| struct super_block *sb = inode->i_sb; |
| struct ext3_iloc iloc; |
| int err = 0, rc; |
| |
| lock_super(sb); |
| if (!list_empty(&EXT3_I(inode)->i_orphan)) |
| goto out_unlock; |
| |
| /* Orphan handling is only valid for files with data blocks |
| * being truncated, or files being unlinked. */ |
| |
| /* @@@ FIXME: Observation from aviro: |
| * I think I can trigger J_ASSERT in ext3_orphan_add(). We block |
| * here (on lock_super()), so race with ext3_link() which might bump |
| * ->i_nlink. For, say it, character device. Not a regular file, |
| * not a directory, not a symlink and ->i_nlink > 0. |
| */ |
| J_ASSERT ((S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || |
| S_ISLNK(inode->i_mode)) || inode->i_nlink == 0); |
| |
| BUFFER_TRACE(EXT3_SB(sb)->s_sbh, "get_write_access"); |
| err = ext3_journal_get_write_access(handle, EXT3_SB(sb)->s_sbh); |
| if (err) |
| goto out_unlock; |
| |
| err = ext3_reserve_inode_write(handle, inode, &iloc); |
| if (err) |
| goto out_unlock; |
| |
| /* Insert this inode at the head of the on-disk orphan list... */ |
| NEXT_ORPHAN(inode) = le32_to_cpu(EXT3_SB(sb)->s_es->s_last_orphan); |
| EXT3_SB(sb)->s_es->s_last_orphan = cpu_to_le32(inode->i_ino); |
| err = ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh); |
| rc = ext3_mark_iloc_dirty(handle, inode, &iloc); |
| if (!err) |
| err = rc; |
| |
| /* Only add to the head of the in-memory list if all the |
| * previous operations succeeded. If the orphan_add is going to |
| * fail (possibly taking the journal offline), we can't risk |
| * leaving the inode on the orphan list: stray orphan-list |
| * entries can cause panics at unmount time. |
| * |
| * This is safe: on error we're going to ignore the orphan list |
| * anyway on the next recovery. */ |
| if (!err) |
| list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan); |
| |
| jbd_debug(4, "superblock will point to %lu\n", inode->i_ino); |
| jbd_debug(4, "orphan inode %lu will point to %d\n", |
| inode->i_ino, NEXT_ORPHAN(inode)); |
| out_unlock: |
| unlock_super(sb); |
| ext3_std_error(inode->i_sb, err); |
| return err; |
| } |
| |
| /* |
| * ext3_orphan_del() removes an unlinked or truncated inode from the list |
| * of such inodes stored on disk, because it is finally being cleaned up. |
| */ |
| int ext3_orphan_del(handle_t *handle, struct inode *inode) |
| { |
| struct list_head *prev; |
| struct ext3_inode_info *ei = EXT3_I(inode); |
| struct ext3_sb_info *sbi; |
| unsigned long ino_next; |
| struct ext3_iloc iloc; |
| int err = 0; |
| |
| lock_super(inode->i_sb); |
| if (list_empty(&ei->i_orphan)) { |
| unlock_super(inode->i_sb); |
| return 0; |
| } |
| |
| ino_next = NEXT_ORPHAN(inode); |
| prev = ei->i_orphan.prev; |
| sbi = EXT3_SB(inode->i_sb); |
| |
| jbd_debug(4, "remove inode %lu from orphan list\n", inode->i_ino); |
| |
| list_del_init(&ei->i_orphan); |
| |
| /* If we're on an error path, we may not have a valid |
| * transaction handle with which to update the orphan list on |
| * disk, but we still need to remove the inode from the linked |
| * list in memory. */ |
| if (!handle) |
| goto out; |
| |
| err = ext3_reserve_inode_write(handle, inode, &iloc); |
| if (err) |
| goto out_err; |
| |
| if (prev == &sbi->s_orphan) { |
| jbd_debug(4, "superblock will point to %lu\n", ino_next); |
| BUFFER_TRACE(sbi->s_sbh, "get_write_access"); |
| err = ext3_journal_get_write_access(handle, sbi->s_sbh); |
| if (err) |
| goto out_brelse; |
| sbi->s_es->s_last_orphan = cpu_to_le32(ino_next); |
| err = ext3_journal_dirty_metadata(handle, sbi->s_sbh); |
| } else { |
| struct ext3_iloc iloc2; |
| struct inode *i_prev = |
| &list_entry(prev, struct ext3_inode_info, i_orphan)->vfs_inode; |
| |
| jbd_debug(4, "orphan inode %lu will point to %lu\n", |
| i_prev->i_ino, ino_next); |
| err = ext3_reserve_inode_write(handle, i_prev, &iloc2); |
| if (err) |
| goto out_brelse; |
| NEXT_ORPHAN(i_prev) = ino_next; |
| err = ext3_mark_iloc_dirty(handle, i_prev, &iloc2); |
| } |
| if (err) |
| goto out_brelse; |
| NEXT_ORPHAN(inode) = 0; |
| err = ext3_mark_iloc_dirty(handle, inode, &iloc); |
| |
| out_err: |
| ext3_std_error(inode->i_sb, err); |
| out: |
| unlock_super(inode->i_sb); |
| return err; |
| |
| out_brelse: |
| brelse(iloc.bh); |
| goto out_err; |
| } |
| |
| static int ext3_rmdir (struct inode * dir, struct dentry *dentry) |
| { |
| int retval; |
| struct inode * inode; |
| struct buffer_head * bh; |
| struct ext3_dir_entry_2 * de; |
| handle_t *handle; |
| |
| /* Initialize quotas before so that eventual writes go in |
| * separate transaction */ |
| vfs_dq_init(dentry->d_inode); |
| handle = ext3_journal_start(dir, EXT3_DELETE_TRANS_BLOCKS(dir->i_sb)); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| |
| retval = -ENOENT; |
| bh = ext3_find_entry(dir, &dentry->d_name, &de); |
| if (!bh) |
| goto end_rmdir; |
| |
| if (IS_DIRSYNC(dir)) |
| handle->h_sync = 1; |
| |
| inode = dentry->d_inode; |
| |
| retval = -EIO; |
| if (le32_to_cpu(de->inode) != inode->i_ino) |
| goto end_rmdir; |
| |
| retval = -ENOTEMPTY; |
| if (!empty_dir (inode)) |
| goto end_rmdir; |
| |
| retval = ext3_delete_entry(handle, dir, de, bh); |
| if (retval) |
| goto end_rmdir; |
| if (inode->i_nlink != 2) |
| ext3_warning (inode->i_sb, "ext3_rmdir", |
| "empty directory has nlink!=2 (%d)", |
| inode->i_nlink); |
| inode->i_version++; |
| clear_nlink(inode); |
| /* There's no need to set i_disksize: the fact that i_nlink is |
| * zero will ensure that the right thing happens during any |
| * recovery. */ |
| inode->i_size = 0; |
| ext3_orphan_add(handle, inode); |
| inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC; |
| ext3_mark_inode_dirty(handle, inode); |
| drop_nlink(dir); |
| ext3_update_dx_flag(dir); |
| ext3_mark_inode_dirty(handle, dir); |
| |
| end_rmdir: |
| ext3_journal_stop(handle); |
| brelse (bh); |
| return retval; |
| } |
| |
| static int ext3_unlink(struct inode * dir, struct dentry *dentry) |
| { |
| int retval; |
| struct inode * inode; |
| struct buffer_head * bh; |
| struct ext3_dir_entry_2 * de; |
| handle_t *handle; |
| |
| /* Initialize quotas before so that eventual writes go |
| * in separate transaction */ |
| vfs_dq_init(dentry->d_inode); |
| handle = ext3_journal_start(dir, EXT3_DELETE_TRANS_BLOCKS(dir->i_sb)); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| |
| if (IS_DIRSYNC(dir)) |
| handle->h_sync = 1; |
| |
| retval = -ENOENT; |
| bh = ext3_find_entry(dir, &dentry->d_name, &de); |
| if (!bh) |
| goto end_unlink; |
| |
| inode = dentry->d_inode; |
| |
| retval = -EIO; |
| if (le32_to_cpu(de->inode) != inode->i_ino) |
| goto end_unlink; |
| |
| if (!inode->i_nlink) { |
| ext3_warning (inode->i_sb, "ext3_unlink", |
| "Deleting nonexistent file (%lu), %d", |
| inode->i_ino, inode->i_nlink); |
| inode->i_nlink = 1; |
| } |
| retval = ext3_delete_entry(handle, dir, de, bh); |
| if (retval) |
| goto end_unlink; |
| dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC; |
| ext3_update_dx_flag(dir); |
| ext3_mark_inode_dirty(handle, dir); |
| drop_nlink(inode); |
| if (!inode->i_nlink) |
| ext3_orphan_add(handle, inode); |
| inode->i_ctime = dir->i_ctime; |
| ext3_mark_inode_dirty(handle, inode); |
| retval = 0; |
| |
| end_unlink: |
| ext3_journal_stop(handle); |
| brelse (bh); |
| return retval; |
| } |
| |
| static int ext3_symlink (struct inode * dir, |
| struct dentry *dentry, const char * symname) |
| { |
| handle_t *handle; |
| struct inode * inode; |
| int l, err, retries = 0; |
| |
| l = strlen(symname)+1; |
| if (l > dir->i_sb->s_blocksize) |
| return -ENAMETOOLONG; |
| |
| retry: |
| handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + |
| EXT3_INDEX_EXTRA_TRANS_BLOCKS + 5 + |
| EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| |
| if (IS_DIRSYNC(dir)) |
| handle->h_sync = 1; |
| |
| inode = ext3_new_inode (handle, dir, S_IFLNK|S_IRWXUGO); |
| err = PTR_ERR(inode); |
| if (IS_ERR(inode)) |
| goto out_stop; |
| |
| if (l > sizeof (EXT3_I(inode)->i_data)) { |
| inode->i_op = &ext3_symlink_inode_operations; |
| ext3_set_aops(inode); |
| /* |
| * page_symlink() calls into ext3_prepare/commit_write. |
| * We have a transaction open. All is sweetness. It also sets |
| * i_size in generic_commit_write(). |
| */ |
| err = __page_symlink(inode, symname, l, 1); |
| if (err) { |
| drop_nlink(inode); |
| unlock_new_inode(inode); |
| ext3_mark_inode_dirty(handle, inode); |
| iput (inode); |
| goto out_stop; |
| } |
| } else { |
| inode->i_op = &ext3_fast_symlink_inode_operations; |
| memcpy((char*)&EXT3_I(inode)->i_data,symname,l); |
| inode->i_size = l-1; |
| } |
| EXT3_I(inode)->i_disksize = inode->i_size; |
| err = ext3_add_nondir(handle, dentry, inode); |
| out_stop: |
| ext3_journal_stop(handle); |
| if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) |
| goto retry; |
| return err; |
| } |
| |
| static int ext3_link (struct dentry * old_dentry, |
| struct inode * dir, struct dentry *dentry) |
| { |
| handle_t *handle; |
| struct inode *inode = old_dentry->d_inode; |
| int err, retries = 0; |
| |
| if (inode->i_nlink >= EXT3_LINK_MAX) |
| return -EMLINK; |
| /* |
| * Return -ENOENT if we've raced with unlink and i_nlink is 0. Doing |
| * otherwise has the potential to corrupt the orphan inode list. |
| */ |
| if (inode->i_nlink == 0) |
| return -ENOENT; |
| |
| retry: |
| handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + |
| EXT3_INDEX_EXTRA_TRANS_BLOCKS); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| |
| if (IS_DIRSYNC(dir)) |
| handle->h_sync = 1; |
| |
| inode->i_ctime = CURRENT_TIME_SEC; |
| inc_nlink(inode); |
| atomic_inc(&inode->i_count); |
| |
| err = ext3_add_entry(handle, dentry, inode); |
| if (!err) { |
| ext3_mark_inode_dirty(handle, inode); |
| d_instantiate(dentry, inode); |
| } else { |
| drop_nlink(inode); |
| iput(inode); |
| } |
| ext3_journal_stop(handle); |
| if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) |
| goto retry; |
| return err; |
| } |
| |
| #define PARENT_INO(buffer) \ |
| (ext3_next_entry((struct ext3_dir_entry_2 *)(buffer))->inode) |
| |
| /* |
| * Anybody can rename anything with this: the permission checks are left to the |
| * higher-level routines. |
| */ |
| static int ext3_rename (struct inode * old_dir, struct dentry *old_dentry, |
| struct inode * new_dir,struct dentry *new_dentry) |
| { |
| handle_t *handle; |
| struct inode * old_inode, * new_inode; |
| struct buffer_head * old_bh, * new_bh, * dir_bh; |
| struct ext3_dir_entry_2 * old_de, * new_de; |
| int retval, flush_file = 0; |
| |
| old_bh = new_bh = dir_bh = NULL; |
| |
| /* Initialize quotas before so that eventual writes go |
| * in separate transaction */ |
| if (new_dentry->d_inode) |
| vfs_dq_init(new_dentry->d_inode); |
| handle = ext3_journal_start(old_dir, 2 * |
| EXT3_DATA_TRANS_BLOCKS(old_dir->i_sb) + |
| EXT3_INDEX_EXTRA_TRANS_BLOCKS + 2); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| |
| if (IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir)) |
| handle->h_sync = 1; |
| |
| old_bh = ext3_find_entry(old_dir, &old_dentry->d_name, &old_de); |
| /* |
| * Check for inode number is _not_ due to possible IO errors. |
| * We might rmdir the source, keep it as pwd of some process |
| * and merrily kill the link to whatever was created under the |
| * same name. Goodbye sticky bit ;-< |
| */ |
| old_inode = old_dentry->d_inode; |
| retval = -ENOENT; |
| if (!old_bh || le32_to_cpu(old_de->inode) != old_inode->i_ino) |
| goto end_rename; |
| |
| new_inode = new_dentry->d_inode; |
| new_bh = ext3_find_entry(new_dir, &new_dentry->d_name, &new_de); |
| if (new_bh) { |
| if (!new_inode) { |
| brelse (new_bh); |
| new_bh = NULL; |
| } |
| } |
| if (S_ISDIR(old_inode->i_mode)) { |
| if (new_inode) { |
| retval = -ENOTEMPTY; |
| if (!empty_dir (new_inode)) |
| goto end_rename; |
| } |
| retval = -EIO; |
| dir_bh = ext3_bread (handle, old_inode, 0, 0, &retval); |
| if (!dir_bh) |
| goto end_rename; |
| if (le32_to_cpu(PARENT_INO(dir_bh->b_data)) != old_dir->i_ino) |
| goto end_rename; |
| retval = -EMLINK; |
| if (!new_inode && new_dir!=old_dir && |
| new_dir->i_nlink >= EXT3_LINK_MAX) |
| goto end_rename; |
| } |
| if (!new_bh) { |
| retval = ext3_add_entry (handle, new_dentry, old_inode); |
| if (retval) |
| goto end_rename; |
| } else { |
| BUFFER_TRACE(new_bh, "get write access"); |
| ext3_journal_get_write_access(handle, new_bh); |
| new_de->inode = cpu_to_le32(old_inode->i_ino); |
| if (EXT3_HAS_INCOMPAT_FEATURE(new_dir->i_sb, |
| EXT3_FEATURE_INCOMPAT_FILETYPE)) |
| new_de->file_type = old_de->file_type; |
| new_dir->i_version++; |
| new_dir->i_ctime = new_dir->i_mtime = CURRENT_TIME_SEC; |
| ext3_mark_inode_dirty(handle, new_dir); |
| BUFFER_TRACE(new_bh, "call ext3_journal_dirty_metadata"); |
| ext3_journal_dirty_metadata(handle, new_bh); |
| brelse(new_bh); |
| new_bh = NULL; |
| } |
| |
| /* |
| * Like most other Unix systems, set the ctime for inodes on a |
| * rename. |
| */ |
| old_inode->i_ctime = CURRENT_TIME_SEC; |
| ext3_mark_inode_dirty(handle, old_inode); |
| |
| /* |
| * ok, that's it |
| */ |
| if (le32_to_cpu(old_de->inode) != old_inode->i_ino || |
| old_de->name_len != old_dentry->d_name.len || |
| strncmp(old_de->name, old_dentry->d_name.name, old_de->name_len) || |
| (retval = ext3_delete_entry(handle, old_dir, |
| old_de, old_bh)) == -ENOENT) { |
| /* old_de could have moved from under us during htree split, so |
| * make sure that we are deleting the right entry. We might |
| * also be pointing to a stale entry in the unused part of |
| * old_bh so just checking inum and the name isn't enough. */ |
| struct buffer_head *old_bh2; |
| struct ext3_dir_entry_2 *old_de2; |
| |
| old_bh2 = ext3_find_entry(old_dir, &old_dentry->d_name, |
| &old_de2); |
| if (old_bh2) { |
| retval = ext3_delete_entry(handle, old_dir, |
| old_de2, old_bh2); |
| brelse(old_bh2); |
| } |
| } |
| if (retval) { |
| ext3_warning(old_dir->i_sb, "ext3_rename", |
| "Deleting old file (%lu), %d, error=%d", |
| old_dir->i_ino, old_dir->i_nlink, retval); |
| } |
| |
| if (new_inode) { |
| drop_nlink(new_inode); |
| new_inode->i_ctime = CURRENT_TIME_SEC; |
| } |
| old_dir->i_ctime = old_dir->i_mtime = CURRENT_TIME_SEC; |
| ext3_update_dx_flag(old_dir); |
| if (dir_bh) { |
| BUFFER_TRACE(dir_bh, "get_write_access"); |
| ext3_journal_get_write_access(handle, dir_bh); |
| PARENT_INO(dir_bh->b_data) = cpu_to_le32(new_dir->i_ino); |
| BUFFER_TRACE(dir_bh, "call ext3_journal_dirty_metadata"); |
| ext3_journal_dirty_metadata(handle, dir_bh); |
| drop_nlink(old_dir); |
| if (new_inode) { |
| drop_nlink(new_inode); |
| } else { |
| inc_nlink(new_dir); |
| ext3_update_dx_flag(new_dir); |
| ext3_mark_inode_dirty(handle, new_dir); |
| } |
| } |
| ext3_mark_inode_dirty(handle, old_dir); |
| if (new_inode) { |
| ext3_mark_inode_dirty(handle, new_inode); |
| if (!new_inode->i_nlink) |
| ext3_orphan_add(handle, new_inode); |
| if (ext3_should_writeback_data(new_inode)) |
| flush_file = 1; |
| } |
| retval = 0; |
| |
| end_rename: |
| brelse (dir_bh); |
| brelse (old_bh); |
| brelse (new_bh); |
| ext3_journal_stop(handle); |
| if (retval == 0 && flush_file) |
| filemap_flush(old_inode->i_mapping); |
| return retval; |
| } |
| |
| /* |
| * directories can handle most operations... |
| */ |
| const struct inode_operations ext3_dir_inode_operations = { |
| .create = ext3_create, |
| .lookup = ext3_lookup, |
| .link = ext3_link, |
| .unlink = ext3_unlink, |
| .symlink = ext3_symlink, |
| .mkdir = ext3_mkdir, |
| .rmdir = ext3_rmdir, |
| .mknod = ext3_mknod, |
| .rename = ext3_rename, |
| .setattr = ext3_setattr, |
| #ifdef CONFIG_EXT3_FS_XATTR |
| .setxattr = generic_setxattr, |
| .getxattr = generic_getxattr, |
| .listxattr = ext3_listxattr, |
| .removexattr = generic_removexattr, |
| #endif |
| .check_acl = ext3_check_acl, |
| }; |
| |
| const struct inode_operations ext3_special_inode_operations = { |
| .setattr = ext3_setattr, |
| #ifdef CONFIG_EXT3_FS_XATTR |
| .setxattr = generic_setxattr, |
| .getxattr = generic_getxattr, |
| .listxattr = ext3_listxattr, |
| .removexattr = generic_removexattr, |
| #endif |
| .check_acl = ext3_check_acl, |
| }; |