| /* |
| * This file contains the power_save function for Power7 CPUs. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/threads.h> |
| #include <asm/processor.h> |
| #include <asm/page.h> |
| #include <asm/cputable.h> |
| #include <asm/thread_info.h> |
| #include <asm/ppc_asm.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/ppc-opcode.h> |
| #include <asm/hw_irq.h> |
| #include <asm/kvm_book3s_asm.h> |
| #include <asm/opal.h> |
| #include <asm/cpuidle.h> |
| #include <asm/book3s/64/mmu-hash.h> |
| |
| #undef DEBUG |
| |
| /* |
| * Use unused space in the interrupt stack to save and restore |
| * registers for winkle support. |
| */ |
| #define _SDR1 GPR3 |
| #define _RPR GPR4 |
| #define _SPURR GPR5 |
| #define _PURR GPR6 |
| #define _TSCR GPR7 |
| #define _DSCR GPR8 |
| #define _AMOR GPR9 |
| #define _WORT GPR10 |
| #define _WORC GPR11 |
| |
| /* Idle state entry routines */ |
| |
| #define IDLE_STATE_ENTER_SEQ(IDLE_INST) \ |
| /* Magic NAP/SLEEP/WINKLE mode enter sequence */ \ |
| std r0,0(r1); \ |
| ptesync; \ |
| ld r0,0(r1); \ |
| 1: cmp cr0,r0,r0; \ |
| bne 1b; \ |
| IDLE_INST; \ |
| b . |
| |
| .text |
| |
| /* |
| * Used by threads when the lock bit of core_idle_state is set. |
| * Threads will spin in HMT_LOW until the lock bit is cleared. |
| * r14 - pointer to core_idle_state |
| * r15 - used to load contents of core_idle_state |
| */ |
| |
| core_idle_lock_held: |
| HMT_LOW |
| 3: lwz r15,0(r14) |
| andi. r15,r15,PNV_CORE_IDLE_LOCK_BIT |
| bne 3b |
| HMT_MEDIUM |
| lwarx r15,0,r14 |
| blr |
| |
| /* |
| * Pass requested state in r3: |
| * r3 - PNV_THREAD_NAP/SLEEP/WINKLE |
| * |
| * To check IRQ_HAPPENED in r4 |
| * 0 - don't check |
| * 1 - check |
| */ |
| _GLOBAL(power7_powersave_common) |
| /* Use r3 to pass state nap/sleep/winkle */ |
| /* NAP is a state loss, we create a regs frame on the |
| * stack, fill it up with the state we care about and |
| * stick a pointer to it in PACAR1. We really only |
| * need to save PC, some CR bits and the NV GPRs, |
| * but for now an interrupt frame will do. |
| */ |
| mflr r0 |
| std r0,16(r1) |
| stdu r1,-INT_FRAME_SIZE(r1) |
| std r0,_LINK(r1) |
| std r0,_NIP(r1) |
| |
| /* Hard disable interrupts */ |
| mfmsr r9 |
| rldicl r9,r9,48,1 |
| rotldi r9,r9,16 |
| mtmsrd r9,1 /* hard-disable interrupts */ |
| |
| /* Check if something happened while soft-disabled */ |
| lbz r0,PACAIRQHAPPENED(r13) |
| andi. r0,r0,~PACA_IRQ_HARD_DIS@l |
| beq 1f |
| cmpwi cr0,r4,0 |
| beq 1f |
| addi r1,r1,INT_FRAME_SIZE |
| ld r0,16(r1) |
| li r3,0 /* Return 0 (no nap) */ |
| mtlr r0 |
| blr |
| |
| 1: /* We mark irqs hard disabled as this is the state we'll |
| * be in when returning and we need to tell arch_local_irq_restore() |
| * about it |
| */ |
| li r0,PACA_IRQ_HARD_DIS |
| stb r0,PACAIRQHAPPENED(r13) |
| |
| /* We haven't lost state ... yet */ |
| li r0,0 |
| stb r0,PACA_NAPSTATELOST(r13) |
| |
| /* Continue saving state */ |
| SAVE_GPR(2, r1) |
| SAVE_NVGPRS(r1) |
| mfcr r4 |
| std r4,_CCR(r1) |
| std r9,_MSR(r1) |
| std r1,PACAR1(r13) |
| |
| /* |
| * Go to real mode to do the nap, as required by the architecture. |
| * Also, we need to be in real mode before setting hwthread_state, |
| * because as soon as we do that, another thread can switch |
| * the MMU context to the guest. |
| */ |
| LOAD_REG_IMMEDIATE(r5, MSR_IDLE) |
| li r6, MSR_RI |
| andc r6, r9, r6 |
| LOAD_REG_ADDR(r7, power7_enter_nap_mode) |
| mtmsrd r6, 1 /* clear RI before setting SRR0/1 */ |
| mtspr SPRN_SRR0, r7 |
| mtspr SPRN_SRR1, r5 |
| rfid |
| |
| .globl power7_enter_nap_mode |
| power7_enter_nap_mode: |
| #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE |
| /* Tell KVM we're napping */ |
| li r4,KVM_HWTHREAD_IN_NAP |
| stb r4,HSTATE_HWTHREAD_STATE(r13) |
| #endif |
| stb r3,PACA_THREAD_IDLE_STATE(r13) |
| cmpwi cr3,r3,PNV_THREAD_SLEEP |
| bge cr3,2f |
| IDLE_STATE_ENTER_SEQ(PPC_NAP) |
| /* No return */ |
| 2: |
| /* Sleep or winkle */ |
| lbz r7,PACA_THREAD_MASK(r13) |
| ld r14,PACA_CORE_IDLE_STATE_PTR(r13) |
| lwarx_loop1: |
| lwarx r15,0,r14 |
| |
| andi. r9,r15,PNV_CORE_IDLE_LOCK_BIT |
| bnel core_idle_lock_held |
| |
| andc r15,r15,r7 /* Clear thread bit */ |
| |
| andi. r15,r15,PNV_CORE_IDLE_THREAD_BITS |
| |
| /* |
| * If cr0 = 0, then current thread is the last thread of the core entering |
| * sleep. Last thread needs to execute the hardware bug workaround code if |
| * required by the platform. |
| * Make the workaround call unconditionally here. The below branch call is |
| * patched out when the idle states are discovered if the platform does not |
| * require it. |
| */ |
| .global pnv_fastsleep_workaround_at_entry |
| pnv_fastsleep_workaround_at_entry: |
| beq fastsleep_workaround_at_entry |
| |
| stwcx. r15,0,r14 |
| bne- lwarx_loop1 |
| isync |
| |
| common_enter: /* common code for all the threads entering sleep or winkle */ |
| bgt cr3,enter_winkle |
| IDLE_STATE_ENTER_SEQ(PPC_SLEEP) |
| |
| fastsleep_workaround_at_entry: |
| ori r15,r15,PNV_CORE_IDLE_LOCK_BIT |
| stwcx. r15,0,r14 |
| bne- lwarx_loop1 |
| isync |
| |
| /* Fast sleep workaround */ |
| li r3,1 |
| li r4,1 |
| li r0,OPAL_CONFIG_CPU_IDLE_STATE |
| bl opal_call_realmode |
| |
| /* Clear Lock bit */ |
| li r0,0 |
| lwsync |
| stw r0,0(r14) |
| b common_enter |
| |
| enter_winkle: |
| /* |
| * Note all register i.e per-core, per-subcore or per-thread is saved |
| * here since any thread in the core might wake up first |
| */ |
| mfspr r3,SPRN_SDR1 |
| std r3,_SDR1(r1) |
| mfspr r3,SPRN_RPR |
| std r3,_RPR(r1) |
| mfspr r3,SPRN_SPURR |
| std r3,_SPURR(r1) |
| mfspr r3,SPRN_PURR |
| std r3,_PURR(r1) |
| mfspr r3,SPRN_TSCR |
| std r3,_TSCR(r1) |
| mfspr r3,SPRN_DSCR |
| std r3,_DSCR(r1) |
| mfspr r3,SPRN_AMOR |
| std r3,_AMOR(r1) |
| mfspr r3,SPRN_WORT |
| std r3,_WORT(r1) |
| mfspr r3,SPRN_WORC |
| std r3,_WORC(r1) |
| IDLE_STATE_ENTER_SEQ(PPC_WINKLE) |
| |
| _GLOBAL(power7_idle) |
| /* Now check if user or arch enabled NAP mode */ |
| LOAD_REG_ADDRBASE(r3,powersave_nap) |
| lwz r4,ADDROFF(powersave_nap)(r3) |
| cmpwi 0,r4,0 |
| beqlr |
| li r3, 1 |
| /* fall through */ |
| |
| _GLOBAL(power7_nap) |
| mr r4,r3 |
| li r3,PNV_THREAD_NAP |
| b power7_powersave_common |
| /* No return */ |
| |
| _GLOBAL(power7_sleep) |
| li r3,PNV_THREAD_SLEEP |
| li r4,1 |
| b power7_powersave_common |
| /* No return */ |
| |
| _GLOBAL(power7_winkle) |
| li r3,3 |
| li r4,1 |
| b power7_powersave_common |
| /* No return */ |
| |
| #define CHECK_HMI_INTERRUPT \ |
| mfspr r0,SPRN_SRR1; \ |
| BEGIN_FTR_SECTION_NESTED(66); \ |
| rlwinm r0,r0,45-31,0xf; /* extract wake reason field (P8) */ \ |
| FTR_SECTION_ELSE_NESTED(66); \ |
| rlwinm r0,r0,45-31,0xe; /* P7 wake reason field is 3 bits */ \ |
| ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \ |
| cmpwi r0,0xa; /* Hypervisor maintenance ? */ \ |
| bne 20f; \ |
| /* Invoke opal call to handle hmi */ \ |
| ld r2,PACATOC(r13); \ |
| ld r1,PACAR1(r13); \ |
| std r3,ORIG_GPR3(r1); /* Save original r3 */ \ |
| li r0,OPAL_HANDLE_HMI; /* Pass opal token argument*/ \ |
| bl opal_call_realmode; \ |
| ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \ |
| 20: nop; |
| |
| |
| _GLOBAL(power7_wakeup_tb_loss) |
| ld r2,PACATOC(r13); |
| ld r1,PACAR1(r13) |
| /* |
| * Before entering any idle state, the NVGPRs are saved in the stack |
| * and they are restored before switching to the process context. Hence |
| * until they are restored, they are free to be used. |
| * |
| * Save SRR1 in a NVGPR as it might be clobbered in opal_call_realmode |
| * (called in CHECK_HMI_INTERRUPT). SRR1 is required to determine the |
| * wakeup reason if we branch to kvm_start_guest. |
| */ |
| |
| mfspr r16,SPRN_SRR1 |
| BEGIN_FTR_SECTION |
| CHECK_HMI_INTERRUPT |
| END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) |
| |
| lbz r7,PACA_THREAD_MASK(r13) |
| ld r14,PACA_CORE_IDLE_STATE_PTR(r13) |
| lwarx_loop2: |
| lwarx r15,0,r14 |
| andi. r9,r15,PNV_CORE_IDLE_LOCK_BIT |
| /* |
| * Lock bit is set in one of the 2 cases- |
| * a. In the sleep/winkle enter path, the last thread is executing |
| * fastsleep workaround code. |
| * b. In the wake up path, another thread is executing fastsleep |
| * workaround undo code or resyncing timebase or restoring context |
| * In either case loop until the lock bit is cleared. |
| */ |
| bnel core_idle_lock_held |
| |
| cmpwi cr2,r15,0 |
| lbz r4,PACA_SUBCORE_SIBLING_MASK(r13) |
| and r4,r4,r15 |
| cmpwi cr1,r4,0 /* Check if first in subcore */ |
| |
| /* |
| * At this stage |
| * cr1 - 0b0100 if first thread to wakeup in subcore |
| * cr2 - 0b0100 if first thread to wakeup in core |
| * cr3- 0b0010 if waking up from sleep or winkle |
| * cr4 - 0b0100 if waking up from winkle |
| */ |
| |
| or r15,r15,r7 /* Set thread bit */ |
| |
| beq cr1,first_thread_in_subcore |
| |
| /* Not first thread in subcore to wake up */ |
| stwcx. r15,0,r14 |
| bne- lwarx_loop2 |
| isync |
| b common_exit |
| |
| first_thread_in_subcore: |
| /* First thread in subcore to wakeup */ |
| ori r15,r15,PNV_CORE_IDLE_LOCK_BIT |
| stwcx. r15,0,r14 |
| bne- lwarx_loop2 |
| isync |
| |
| /* |
| * If waking up from sleep, subcore state is not lost. Hence |
| * skip subcore state restore |
| */ |
| bne cr4,subcore_state_restored |
| |
| /* Restore per-subcore state */ |
| ld r4,_SDR1(r1) |
| mtspr SPRN_SDR1,r4 |
| ld r4,_RPR(r1) |
| mtspr SPRN_RPR,r4 |
| ld r4,_AMOR(r1) |
| mtspr SPRN_AMOR,r4 |
| |
| subcore_state_restored: |
| /* |
| * Check if the thread is also the first thread in the core. If not, |
| * skip to clear_lock. |
| */ |
| bne cr2,clear_lock |
| |
| first_thread_in_core: |
| |
| /* |
| * First thread in the core waking up from fastsleep. It needs to |
| * call the fastsleep workaround code if the platform requires it. |
| * Call it unconditionally here. The below branch instruction will |
| * be patched out when the idle states are discovered if platform |
| * does not require workaround. |
| */ |
| .global pnv_fastsleep_workaround_at_exit |
| pnv_fastsleep_workaround_at_exit: |
| b fastsleep_workaround_at_exit |
| |
| timebase_resync: |
| /* Do timebase resync if we are waking up from sleep. Use cr3 value |
| * set in exceptions-64s.S */ |
| ble cr3,clear_lock |
| /* Time base re-sync */ |
| li r0,OPAL_RESYNC_TIMEBASE |
| bl opal_call_realmode; |
| /* TODO: Check r3 for failure */ |
| |
| /* |
| * If waking up from sleep, per core state is not lost, skip to |
| * clear_lock. |
| */ |
| bne cr4,clear_lock |
| |
| /* Restore per core state */ |
| ld r4,_TSCR(r1) |
| mtspr SPRN_TSCR,r4 |
| ld r4,_WORC(r1) |
| mtspr SPRN_WORC,r4 |
| |
| clear_lock: |
| andi. r15,r15,PNV_CORE_IDLE_THREAD_BITS |
| lwsync |
| stw r15,0(r14) |
| |
| common_exit: |
| /* |
| * Common to all threads. |
| * |
| * If waking up from sleep, hypervisor state is not lost. Hence |
| * skip hypervisor state restore. |
| */ |
| bne cr4,hypervisor_state_restored |
| |
| /* Waking up from winkle */ |
| |
| /* Restore per thread state */ |
| bl __restore_cpu_power8 |
| |
| /* Restore SLB from PACA */ |
| ld r8,PACA_SLBSHADOWPTR(r13) |
| |
| .rept SLB_NUM_BOLTED |
| li r3, SLBSHADOW_SAVEAREA |
| LDX_BE r5, r8, r3 |
| addi r3, r3, 8 |
| LDX_BE r6, r8, r3 |
| andis. r7,r5,SLB_ESID_V@h |
| beq 1f |
| slbmte r6,r5 |
| 1: addi r8,r8,16 |
| .endr |
| |
| ld r4,_SPURR(r1) |
| mtspr SPRN_SPURR,r4 |
| ld r4,_PURR(r1) |
| mtspr SPRN_PURR,r4 |
| ld r4,_DSCR(r1) |
| mtspr SPRN_DSCR,r4 |
| ld r4,_WORT(r1) |
| mtspr SPRN_WORT,r4 |
| |
| hypervisor_state_restored: |
| |
| li r5,PNV_THREAD_RUNNING |
| stb r5,PACA_THREAD_IDLE_STATE(r13) |
| |
| mtspr SPRN_SRR1,r16 |
| #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE |
| li r0,KVM_HWTHREAD_IN_KERNEL |
| stb r0,HSTATE_HWTHREAD_STATE(r13) |
| /* Order setting hwthread_state vs. testing hwthread_req */ |
| sync |
| lbz r0,HSTATE_HWTHREAD_REQ(r13) |
| cmpwi r0,0 |
| beq 6f |
| b kvm_start_guest |
| 6: |
| #endif |
| |
| REST_NVGPRS(r1) |
| REST_GPR(2, r1) |
| ld r3,_CCR(r1) |
| ld r4,_MSR(r1) |
| ld r5,_NIP(r1) |
| addi r1,r1,INT_FRAME_SIZE |
| mtcr r3 |
| mfspr r3,SPRN_SRR1 /* Return SRR1 */ |
| mtspr SPRN_SRR1,r4 |
| mtspr SPRN_SRR0,r5 |
| rfid |
| |
| fastsleep_workaround_at_exit: |
| li r3,1 |
| li r4,0 |
| li r0,OPAL_CONFIG_CPU_IDLE_STATE |
| bl opal_call_realmode |
| b timebase_resync |
| |
| /* |
| * R3 here contains the value that will be returned to the caller |
| * of power7_nap. |
| */ |
| _GLOBAL(power7_wakeup_loss) |
| ld r1,PACAR1(r13) |
| BEGIN_FTR_SECTION |
| CHECK_HMI_INTERRUPT |
| END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) |
| REST_NVGPRS(r1) |
| REST_GPR(2, r1) |
| ld r6,_CCR(r1) |
| ld r4,_MSR(r1) |
| ld r5,_NIP(r1) |
| addi r1,r1,INT_FRAME_SIZE |
| mtcr r6 |
| mtspr SPRN_SRR1,r4 |
| mtspr SPRN_SRR0,r5 |
| rfid |
| |
| /* |
| * R3 here contains the value that will be returned to the caller |
| * of power7_nap. |
| */ |
| _GLOBAL(power7_wakeup_noloss) |
| lbz r0,PACA_NAPSTATELOST(r13) |
| cmpwi r0,0 |
| bne power7_wakeup_loss |
| BEGIN_FTR_SECTION |
| CHECK_HMI_INTERRUPT |
| END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) |
| ld r1,PACAR1(r13) |
| ld r6,_CCR(r1) |
| ld r4,_MSR(r1) |
| ld r5,_NIP(r1) |
| addi r1,r1,INT_FRAME_SIZE |
| mtcr r6 |
| mtspr SPRN_SRR1,r4 |
| mtspr SPRN_SRR0,r5 |
| rfid |