| /*====================================================================== |
| |
| Device driver for the PCMCIA control functionality of PXA2xx |
| microprocessors. |
| |
| The contents of this file may be used under the |
| terms of the GNU Public License version 2 (the "GPL") |
| |
| (c) Ian Molton (spyro@f2s.com) 2003 |
| (c) Stefan Eletzhofer (stefan.eletzhofer@inquant.de) 2003,4 |
| |
| derived from sa11xx_base.c |
| |
| Portions created by John G. Dorsey are |
| Copyright (C) 1999 John G. Dorsey. |
| |
| ======================================================================*/ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/cpufreq.h> |
| #include <linux/ioport.h> |
| #include <linux/kernel.h> |
| #include <linux/spinlock.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/system.h> |
| #include <asm/arch/pxa-regs.h> |
| #include <asm/arch/pxa2xx-regs.h> |
| |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/ss.h> |
| #include <pcmcia/cistpl.h> |
| |
| #include "soc_common.h" |
| #include "pxa2xx_base.h" |
| |
| |
| #define MCXX_SETUP_MASK (0x7f) |
| #define MCXX_ASST_MASK (0x1f) |
| #define MCXX_HOLD_MASK (0x3f) |
| #define MCXX_SETUP_SHIFT (0) |
| #define MCXX_ASST_SHIFT (7) |
| #define MCXX_HOLD_SHIFT (14) |
| |
| static inline u_int pxa2xx_mcxx_hold(u_int pcmcia_cycle_ns, |
| u_int mem_clk_10khz) |
| { |
| u_int code = pcmcia_cycle_ns * mem_clk_10khz; |
| return (code / 300000) + ((code % 300000) ? 1 : 0) - 1; |
| } |
| |
| static inline u_int pxa2xx_mcxx_asst(u_int pcmcia_cycle_ns, |
| u_int mem_clk_10khz) |
| { |
| u_int code = pcmcia_cycle_ns * mem_clk_10khz; |
| return (code / 300000) + ((code % 300000) ? 1 : 0) + 1; |
| } |
| |
| static inline u_int pxa2xx_mcxx_setup(u_int pcmcia_cycle_ns, |
| u_int mem_clk_10khz) |
| { |
| u_int code = pcmcia_cycle_ns * mem_clk_10khz; |
| return (code / 100000) + ((code % 100000) ? 1 : 0) - 1; |
| } |
| |
| /* This function returns the (approximate) command assertion period, in |
| * nanoseconds, for a given CPU clock frequency and MCXX_ASST value: |
| */ |
| static inline u_int pxa2xx_pcmcia_cmd_time(u_int mem_clk_10khz, |
| u_int pcmcia_mcxx_asst) |
| { |
| return (300000 * (pcmcia_mcxx_asst + 1) / mem_clk_10khz); |
| } |
| |
| static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock ) |
| { |
| MCMEM(sock) = ((pxa2xx_mcxx_setup(speed, clock) |
| & MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT) |
| | ((pxa2xx_mcxx_asst(speed, clock) |
| & MCXX_ASST_MASK) << MCXX_ASST_SHIFT) |
| | ((pxa2xx_mcxx_hold(speed, clock) |
| & MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT); |
| |
| return 0; |
| } |
| |
| static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock ) |
| { |
| MCIO(sock) = ((pxa2xx_mcxx_setup(speed, clock) |
| & MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT) |
| | ((pxa2xx_mcxx_asst(speed, clock) |
| & MCXX_ASST_MASK) << MCXX_ASST_SHIFT) |
| | ((pxa2xx_mcxx_hold(speed, clock) |
| & MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT); |
| |
| return 0; |
| } |
| |
| static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock ) |
| { |
| MCATT(sock) = ((pxa2xx_mcxx_setup(speed, clock) |
| & MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT) |
| | ((pxa2xx_mcxx_asst(speed, clock) |
| & MCXX_ASST_MASK) << MCXX_ASST_SHIFT) |
| | ((pxa2xx_mcxx_hold(speed, clock) |
| & MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT); |
| |
| return 0; |
| } |
| |
| static int pxa2xx_pcmcia_set_mcxx(struct soc_pcmcia_socket *skt, unsigned int clk) |
| { |
| struct soc_pcmcia_timing timing; |
| int sock = skt->nr; |
| |
| soc_common_pcmcia_get_timing(skt, &timing); |
| |
| pxa2xx_pcmcia_set_mcmem(sock, timing.mem, clk); |
| pxa2xx_pcmcia_set_mcatt(sock, timing.attr, clk); |
| pxa2xx_pcmcia_set_mcio(sock, timing.io, clk); |
| |
| return 0; |
| } |
| |
| static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt) |
| { |
| unsigned int clk = get_memclk_frequency_10khz(); |
| return pxa2xx_pcmcia_set_mcxx(skt, clk); |
| } |
| |
| #ifdef CONFIG_CPU_FREQ |
| |
| static int |
| pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt, |
| unsigned long val, |
| struct cpufreq_freqs *freqs) |
| { |
| #warning "it's not clear if this is right since the core CPU (N) clock has no effect on the memory (L) clock" |
| switch (val) { |
| case CPUFREQ_PRECHANGE: |
| if (freqs->new > freqs->old) { |
| debug(skt, 2, "new frequency %u.%uMHz > %u.%uMHz, " |
| "pre-updating\n", |
| freqs->new / 1000, (freqs->new / 100) % 10, |
| freqs->old / 1000, (freqs->old / 100) % 10); |
| pxa2xx_pcmcia_set_mcxx(skt, freqs->new); |
| } |
| break; |
| |
| case CPUFREQ_POSTCHANGE: |
| if (freqs->new < freqs->old) { |
| debug(skt, 2, "new frequency %u.%uMHz < %u.%uMHz, " |
| "post-updating\n", |
| freqs->new / 1000, (freqs->new / 100) % 10, |
| freqs->old / 1000, (freqs->old / 100) % 10); |
| pxa2xx_pcmcia_set_mcxx(skt, freqs->new); |
| } |
| break; |
| } |
| return 0; |
| } |
| #endif |
| |
| int __pxa2xx_drv_pcmcia_probe(struct device *dev) |
| { |
| int ret; |
| struct pcmcia_low_level *ops; |
| int first, nr; |
| |
| if (!dev || !dev->platform_data) |
| return -ENODEV; |
| |
| ops = (struct pcmcia_low_level *)dev->platform_data; |
| first = ops->first; |
| nr = ops->nr; |
| |
| /* Provide our PXA2xx specific timing routines. */ |
| ops->set_timing = pxa2xx_pcmcia_set_timing; |
| #ifdef CONFIG_CPU_FREQ |
| ops->frequency_change = pxa2xx_pcmcia_frequency_change; |
| #endif |
| |
| ret = soc_common_drv_pcmcia_probe(dev, ops, first, nr); |
| |
| if (ret == 0) { |
| /* |
| * We have at least one socket, so set MECR:CIT |
| * (Card Is There) |
| */ |
| MECR |= MECR_CIT; |
| |
| /* Set MECR:NOS (Number Of Sockets) */ |
| if (nr > 1) |
| MECR |= MECR_NOS; |
| else |
| MECR &= ~MECR_NOS; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(__pxa2xx_drv_pcmcia_probe); |
| |
| |
| static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev) |
| { |
| return __pxa2xx_drv_pcmcia_probe(&dev->dev); |
| } |
| |
| static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev) |
| { |
| return soc_common_drv_pcmcia_remove(&dev->dev); |
| } |
| |
| static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| return pcmcia_socket_dev_suspend(&dev->dev, state); |
| } |
| |
| static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev) |
| { |
| struct pcmcia_low_level *ops = dev->dev.platform_data; |
| int nr = ops ? ops->nr : 0; |
| |
| MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0); |
| |
| return pcmcia_socket_dev_resume(&dev->dev); |
| } |
| |
| static struct platform_driver pxa2xx_pcmcia_driver = { |
| .probe = pxa2xx_drv_pcmcia_probe, |
| .remove = pxa2xx_drv_pcmcia_remove, |
| .suspend = pxa2xx_drv_pcmcia_suspend, |
| .resume = pxa2xx_drv_pcmcia_resume, |
| .driver = { |
| .name = "pxa2xx-pcmcia", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init pxa2xx_pcmcia_init(void) |
| { |
| return platform_driver_register(&pxa2xx_pcmcia_driver); |
| } |
| |
| static void __exit pxa2xx_pcmcia_exit(void) |
| { |
| platform_driver_unregister(&pxa2xx_pcmcia_driver); |
| } |
| |
| fs_initcall(pxa2xx_pcmcia_init); |
| module_exit(pxa2xx_pcmcia_exit); |
| |
| MODULE_AUTHOR("Stefan Eletzhofer <stefan.eletzhofer@inquant.de> and Ian Molton <spyro@f2s.com>"); |
| MODULE_DESCRIPTION("Linux PCMCIA Card Services: PXA2xx core socket driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:pxa2xx-pcmcia"); |