| #ifndef _ASM_X86_TLBFLUSH_H |
| #define _ASM_X86_TLBFLUSH_H |
| |
| #include <linux/mm.h> |
| #include <linux/sched.h> |
| |
| #include <asm/processor.h> |
| #include <asm/cpufeature.h> |
| #include <asm/special_insns.h> |
| #include <asm/smp.h> |
| |
| static inline void __invpcid(unsigned long pcid, unsigned long addr, |
| unsigned long type) |
| { |
| struct { u64 d[2]; } desc = { { pcid, addr } }; |
| |
| /* |
| * The memory clobber is because the whole point is to invalidate |
| * stale TLB entries and, especially if we're flushing global |
| * mappings, we don't want the compiler to reorder any subsequent |
| * memory accesses before the TLB flush. |
| * |
| * The hex opcode is invpcid (%ecx), %eax in 32-bit mode and |
| * invpcid (%rcx), %rax in long mode. |
| */ |
| asm volatile (".byte 0x66, 0x0f, 0x38, 0x82, 0x01" |
| : : "m" (desc), "a" (type), "c" (&desc) : "memory"); |
| } |
| |
| #define INVPCID_TYPE_INDIV_ADDR 0 |
| #define INVPCID_TYPE_SINGLE_CTXT 1 |
| #define INVPCID_TYPE_ALL_INCL_GLOBAL 2 |
| #define INVPCID_TYPE_ALL_NON_GLOBAL 3 |
| |
| /* Flush all mappings for a given pcid and addr, not including globals. */ |
| static inline void invpcid_flush_one(unsigned long pcid, |
| unsigned long addr) |
| { |
| __invpcid(pcid, addr, INVPCID_TYPE_INDIV_ADDR); |
| } |
| |
| /* Flush all mappings for a given PCID, not including globals. */ |
| static inline void invpcid_flush_single_context(unsigned long pcid) |
| { |
| __invpcid(pcid, 0, INVPCID_TYPE_SINGLE_CTXT); |
| } |
| |
| /* Flush all mappings, including globals, for all PCIDs. */ |
| static inline void invpcid_flush_all(void) |
| { |
| __invpcid(0, 0, INVPCID_TYPE_ALL_INCL_GLOBAL); |
| } |
| |
| /* Flush all mappings for all PCIDs except globals. */ |
| static inline void invpcid_flush_all_nonglobals(void) |
| { |
| __invpcid(0, 0, INVPCID_TYPE_ALL_NON_GLOBAL); |
| } |
| |
| static inline u64 inc_mm_tlb_gen(struct mm_struct *mm) |
| { |
| u64 new_tlb_gen; |
| |
| /* |
| * Bump the generation count. This also serves as a full barrier |
| * that synchronizes with switch_mm(): callers are required to order |
| * their read of mm_cpumask after their writes to the paging |
| * structures. |
| */ |
| smp_mb__before_atomic(); |
| new_tlb_gen = atomic64_inc_return(&mm->context.tlb_gen); |
| smp_mb__after_atomic(); |
| |
| return new_tlb_gen; |
| } |
| |
| #ifdef CONFIG_PARAVIRT |
| #include <asm/paravirt.h> |
| #else |
| #define __flush_tlb() __native_flush_tlb() |
| #define __flush_tlb_global() __native_flush_tlb_global() |
| #define __flush_tlb_single(addr) __native_flush_tlb_single(addr) |
| #endif |
| |
| static inline bool tlb_defer_switch_to_init_mm(void) |
| { |
| /* |
| * If we have PCID, then switching to init_mm is reasonably |
| * fast. If we don't have PCID, then switching to init_mm is |
| * quite slow, so we try to defer it in the hopes that we can |
| * avoid it entirely. The latter approach runs the risk of |
| * receiving otherwise unnecessary IPIs. |
| * |
| * This choice is just a heuristic. The tlb code can handle this |
| * function returning true or false regardless of whether we have |
| * PCID. |
| */ |
| return !static_cpu_has(X86_FEATURE_PCID); |
| } |
| |
| /* |
| * 6 because 6 should be plenty and struct tlb_state will fit in |
| * two cache lines. |
| */ |
| #define TLB_NR_DYN_ASIDS 6 |
| |
| struct tlb_context { |
| u64 ctx_id; |
| u64 tlb_gen; |
| }; |
| |
| struct tlb_state { |
| /* |
| * cpu_tlbstate.loaded_mm should match CR3 whenever interrupts |
| * are on. This means that it may not match current->active_mm, |
| * which will contain the previous user mm when we're in lazy TLB |
| * mode even if we've already switched back to swapper_pg_dir. |
| */ |
| struct mm_struct *loaded_mm; |
| u16 loaded_mm_asid; |
| u16 next_asid; |
| |
| /* |
| * We can be in one of several states: |
| * |
| * - Actively using an mm. Our CPU's bit will be set in |
| * mm_cpumask(loaded_mm) and is_lazy == false; |
| * |
| * - Not using a real mm. loaded_mm == &init_mm. Our CPU's bit |
| * will not be set in mm_cpumask(&init_mm) and is_lazy == false. |
| * |
| * - Lazily using a real mm. loaded_mm != &init_mm, our bit |
| * is set in mm_cpumask(loaded_mm), but is_lazy == true. |
| * We're heuristically guessing that the CR3 load we |
| * skipped more than makes up for the overhead added by |
| * lazy mode. |
| */ |
| bool is_lazy; |
| |
| /* |
| * Access to this CR4 shadow and to H/W CR4 is protected by |
| * disabling interrupts when modifying either one. |
| */ |
| unsigned long cr4; |
| |
| /* |
| * This is a list of all contexts that might exist in the TLB. |
| * There is one per ASID that we use, and the ASID (what the |
| * CPU calls PCID) is the index into ctxts. |
| * |
| * For each context, ctx_id indicates which mm the TLB's user |
| * entries came from. As an invariant, the TLB will never |
| * contain entries that are out-of-date as when that mm reached |
| * the tlb_gen in the list. |
| * |
| * To be clear, this means that it's legal for the TLB code to |
| * flush the TLB without updating tlb_gen. This can happen |
| * (for now, at least) due to paravirt remote flushes. |
| * |
| * NB: context 0 is a bit special, since it's also used by |
| * various bits of init code. This is fine -- code that |
| * isn't aware of PCID will end up harmlessly flushing |
| * context 0. |
| */ |
| struct tlb_context ctxs[TLB_NR_DYN_ASIDS]; |
| }; |
| DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate); |
| |
| /* Initialize cr4 shadow for this CPU. */ |
| static inline void cr4_init_shadow(void) |
| { |
| this_cpu_write(cpu_tlbstate.cr4, __read_cr4()); |
| } |
| |
| /* Set in this cpu's CR4. */ |
| static inline void cr4_set_bits(unsigned long mask) |
| { |
| unsigned long cr4; |
| |
| cr4 = this_cpu_read(cpu_tlbstate.cr4); |
| if ((cr4 | mask) != cr4) { |
| cr4 |= mask; |
| this_cpu_write(cpu_tlbstate.cr4, cr4); |
| __write_cr4(cr4); |
| } |
| } |
| |
| /* Clear in this cpu's CR4. */ |
| static inline void cr4_clear_bits(unsigned long mask) |
| { |
| unsigned long cr4; |
| |
| cr4 = this_cpu_read(cpu_tlbstate.cr4); |
| if ((cr4 & ~mask) != cr4) { |
| cr4 &= ~mask; |
| this_cpu_write(cpu_tlbstate.cr4, cr4); |
| __write_cr4(cr4); |
| } |
| } |
| |
| static inline void cr4_toggle_bits(unsigned long mask) |
| { |
| unsigned long cr4; |
| |
| cr4 = this_cpu_read(cpu_tlbstate.cr4); |
| cr4 ^= mask; |
| this_cpu_write(cpu_tlbstate.cr4, cr4); |
| __write_cr4(cr4); |
| } |
| |
| /* Read the CR4 shadow. */ |
| static inline unsigned long cr4_read_shadow(void) |
| { |
| return this_cpu_read(cpu_tlbstate.cr4); |
| } |
| |
| /* |
| * Save some of cr4 feature set we're using (e.g. Pentium 4MB |
| * enable and PPro Global page enable), so that any CPU's that boot |
| * up after us can get the correct flags. This should only be used |
| * during boot on the boot cpu. |
| */ |
| extern unsigned long mmu_cr4_features; |
| extern u32 *trampoline_cr4_features; |
| |
| static inline void cr4_set_bits_and_update_boot(unsigned long mask) |
| { |
| mmu_cr4_features |= mask; |
| if (trampoline_cr4_features) |
| *trampoline_cr4_features = mmu_cr4_features; |
| cr4_set_bits(mask); |
| } |
| |
| extern void initialize_tlbstate_and_flush(void); |
| |
| static inline void __native_flush_tlb(void) |
| { |
| /* |
| * If current->mm == NULL then we borrow a mm which may change during a |
| * task switch and therefore we must not be preempted while we write CR3 |
| * back: |
| */ |
| preempt_disable(); |
| native_write_cr3(__native_read_cr3()); |
| preempt_enable(); |
| } |
| |
| static inline void __native_flush_tlb_global_irq_disabled(void) |
| { |
| unsigned long cr4; |
| |
| cr4 = this_cpu_read(cpu_tlbstate.cr4); |
| /* clear PGE */ |
| native_write_cr4(cr4 & ~X86_CR4_PGE); |
| /* write old PGE again and flush TLBs */ |
| native_write_cr4(cr4); |
| } |
| |
| static inline void __native_flush_tlb_global(void) |
| { |
| unsigned long flags; |
| |
| if (static_cpu_has(X86_FEATURE_INVPCID)) { |
| /* |
| * Using INVPCID is considerably faster than a pair of writes |
| * to CR4 sandwiched inside an IRQ flag save/restore. |
| */ |
| invpcid_flush_all(); |
| return; |
| } |
| |
| /* |
| * Read-modify-write to CR4 - protect it from preemption and |
| * from interrupts. (Use the raw variant because this code can |
| * be called from deep inside debugging code.) |
| */ |
| raw_local_irq_save(flags); |
| |
| __native_flush_tlb_global_irq_disabled(); |
| |
| raw_local_irq_restore(flags); |
| } |
| |
| static inline void __native_flush_tlb_single(unsigned long addr) |
| { |
| asm volatile("invlpg (%0)" ::"r" (addr) : "memory"); |
| } |
| |
| static inline void __flush_tlb_all(void) |
| { |
| if (boot_cpu_has(X86_FEATURE_PGE)) |
| __flush_tlb_global(); |
| else |
| __flush_tlb(); |
| |
| /* |
| * Note: if we somehow had PCID but not PGE, then this wouldn't work -- |
| * we'd end up flushing kernel translations for the current ASID but |
| * we might fail to flush kernel translations for other cached ASIDs. |
| * |
| * To avoid this issue, we force PCID off if PGE is off. |
| */ |
| } |
| |
| static inline void __flush_tlb_one(unsigned long addr) |
| { |
| count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE); |
| __flush_tlb_single(addr); |
| } |
| |
| #define TLB_FLUSH_ALL -1UL |
| |
| /* |
| * TLB flushing: |
| * |
| * - flush_tlb_all() flushes all processes TLBs |
| * - flush_tlb_mm(mm) flushes the specified mm context TLB's |
| * - flush_tlb_page(vma, vmaddr) flushes one page |
| * - flush_tlb_range(vma, start, end) flushes a range of pages |
| * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages |
| * - flush_tlb_others(cpumask, info) flushes TLBs on other cpus |
| * |
| * ..but the i386 has somewhat limited tlb flushing capabilities, |
| * and page-granular flushes are available only on i486 and up. |
| */ |
| struct flush_tlb_info { |
| /* |
| * We support several kinds of flushes. |
| * |
| * - Fully flush a single mm. .mm will be set, .end will be |
| * TLB_FLUSH_ALL, and .new_tlb_gen will be the tlb_gen to |
| * which the IPI sender is trying to catch us up. |
| * |
| * - Partially flush a single mm. .mm will be set, .start and |
| * .end will indicate the range, and .new_tlb_gen will be set |
| * such that the changes between generation .new_tlb_gen-1 and |
| * .new_tlb_gen are entirely contained in the indicated range. |
| * |
| * - Fully flush all mms whose tlb_gens have been updated. .mm |
| * will be NULL, .end will be TLB_FLUSH_ALL, and .new_tlb_gen |
| * will be zero. |
| */ |
| struct mm_struct *mm; |
| unsigned long start; |
| unsigned long end; |
| u64 new_tlb_gen; |
| }; |
| |
| #define local_flush_tlb() __flush_tlb() |
| |
| #define flush_tlb_mm(mm) flush_tlb_mm_range(mm, 0UL, TLB_FLUSH_ALL, 0UL) |
| |
| #define flush_tlb_range(vma, start, end) \ |
| flush_tlb_mm_range(vma->vm_mm, start, end, vma->vm_flags) |
| |
| extern void flush_tlb_all(void); |
| extern void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, |
| unsigned long end, unsigned long vmflag); |
| extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); |
| |
| static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long a) |
| { |
| flush_tlb_mm_range(vma->vm_mm, a, a + PAGE_SIZE, VM_NONE); |
| } |
| |
| void native_flush_tlb_others(const struct cpumask *cpumask, |
| const struct flush_tlb_info *info); |
| |
| static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch, |
| struct mm_struct *mm) |
| { |
| inc_mm_tlb_gen(mm); |
| cpumask_or(&batch->cpumask, &batch->cpumask, mm_cpumask(mm)); |
| } |
| |
| extern void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch); |
| |
| #ifndef CONFIG_PARAVIRT |
| #define flush_tlb_others(mask, info) \ |
| native_flush_tlb_others(mask, info) |
| #endif |
| |
| #endif /* _ASM_X86_TLBFLUSH_H */ |