| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1992 Ross Biro |
| * Copyright (C) Linus Torvalds |
| * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle |
| * Copyright (C) 1996 David S. Miller |
| * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com |
| * Copyright (C) 1999 MIPS Technologies, Inc. |
| * Copyright (C) 2000 Ulf Carlsson |
| * |
| * At this time Linux/MIPS64 only supports syscall tracing, even for 32-bit |
| * binaries. |
| */ |
| #include <linux/compiler.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/errno.h> |
| #include <linux/ptrace.h> |
| #include <linux/smp.h> |
| #include <linux/user.h> |
| #include <linux/security.h> |
| #include <linux/audit.h> |
| #include <linux/seccomp.h> |
| |
| #include <asm/byteorder.h> |
| #include <asm/cpu.h> |
| #include <asm/dsp.h> |
| #include <asm/fpu.h> |
| #include <asm/mipsregs.h> |
| #include <asm/mipsmtregs.h> |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| #include <asm/uaccess.h> |
| #include <asm/bootinfo.h> |
| #include <asm/reg.h> |
| |
| /* |
| * Called by kernel/ptrace.c when detaching.. |
| * |
| * Make sure single step bits etc are not set. |
| */ |
| void ptrace_disable(struct task_struct *child) |
| { |
| /* Don't load the watchpoint registers for the ex-child. */ |
| clear_tsk_thread_flag(child, TIF_LOAD_WATCH); |
| } |
| |
| /* |
| * Read a general register set. We always use the 64-bit format, even |
| * for 32-bit kernels and for 32-bit processes on a 64-bit kernel. |
| * Registers are sign extended to fill the available space. |
| */ |
| int ptrace_getregs(struct task_struct *child, __s64 __user *data) |
| { |
| struct pt_regs *regs; |
| int i; |
| |
| if (!access_ok(VERIFY_WRITE, data, 38 * 8)) |
| return -EIO; |
| |
| regs = task_pt_regs(child); |
| |
| for (i = 0; i < 32; i++) |
| __put_user((long)regs->regs[i], data + i); |
| __put_user((long)regs->lo, data + EF_LO - EF_R0); |
| __put_user((long)regs->hi, data + EF_HI - EF_R0); |
| __put_user((long)regs->cp0_epc, data + EF_CP0_EPC - EF_R0); |
| __put_user((long)regs->cp0_badvaddr, data + EF_CP0_BADVADDR - EF_R0); |
| __put_user((long)regs->cp0_status, data + EF_CP0_STATUS - EF_R0); |
| __put_user((long)regs->cp0_cause, data + EF_CP0_CAUSE - EF_R0); |
| |
| return 0; |
| } |
| |
| /* |
| * Write a general register set. As for PTRACE_GETREGS, we always use |
| * the 64-bit format. On a 32-bit kernel only the lower order half |
| * (according to endianness) will be used. |
| */ |
| int ptrace_setregs(struct task_struct *child, __s64 __user *data) |
| { |
| struct pt_regs *regs; |
| int i; |
| |
| if (!access_ok(VERIFY_READ, data, 38 * 8)) |
| return -EIO; |
| |
| regs = task_pt_regs(child); |
| |
| for (i = 0; i < 32; i++) |
| __get_user(regs->regs[i], data + i); |
| __get_user(regs->lo, data + EF_LO - EF_R0); |
| __get_user(regs->hi, data + EF_HI - EF_R0); |
| __get_user(regs->cp0_epc, data + EF_CP0_EPC - EF_R0); |
| |
| /* badvaddr, status, and cause may not be written. */ |
| |
| return 0; |
| } |
| |
| int ptrace_getfpregs(struct task_struct *child, __u32 __user *data) |
| { |
| int i; |
| unsigned int tmp; |
| |
| if (!access_ok(VERIFY_WRITE, data, 33 * 8)) |
| return -EIO; |
| |
| if (tsk_used_math(child)) { |
| fpureg_t *fregs = get_fpu_regs(child); |
| for (i = 0; i < 32; i++) |
| __put_user(fregs[i], i + (__u64 __user *) data); |
| } else { |
| for (i = 0; i < 32; i++) |
| __put_user((__u64) -1, i + (__u64 __user *) data); |
| } |
| |
| __put_user(child->thread.fpu.fcr31, data + 64); |
| |
| preempt_disable(); |
| if (cpu_has_fpu) { |
| unsigned int flags; |
| |
| if (cpu_has_mipsmt) { |
| unsigned int vpflags = dvpe(); |
| flags = read_c0_status(); |
| __enable_fpu(); |
| __asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp)); |
| write_c0_status(flags); |
| evpe(vpflags); |
| } else { |
| flags = read_c0_status(); |
| __enable_fpu(); |
| __asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp)); |
| write_c0_status(flags); |
| } |
| } else { |
| tmp = 0; |
| } |
| preempt_enable(); |
| __put_user(tmp, data + 65); |
| |
| return 0; |
| } |
| |
| int ptrace_setfpregs(struct task_struct *child, __u32 __user *data) |
| { |
| fpureg_t *fregs; |
| int i; |
| |
| if (!access_ok(VERIFY_READ, data, 33 * 8)) |
| return -EIO; |
| |
| fregs = get_fpu_regs(child); |
| |
| for (i = 0; i < 32; i++) |
| __get_user(fregs[i], i + (__u64 __user *) data); |
| |
| __get_user(child->thread.fpu.fcr31, data + 64); |
| |
| /* FIR may not be written. */ |
| |
| return 0; |
| } |
| |
| int ptrace_get_watch_regs(struct task_struct *child, |
| struct pt_watch_regs __user *addr) |
| { |
| enum pt_watch_style style; |
| int i; |
| |
| if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0) |
| return -EIO; |
| if (!access_ok(VERIFY_WRITE, addr, sizeof(struct pt_watch_regs))) |
| return -EIO; |
| |
| #ifdef CONFIG_32BIT |
| style = pt_watch_style_mips32; |
| #define WATCH_STYLE mips32 |
| #else |
| style = pt_watch_style_mips64; |
| #define WATCH_STYLE mips64 |
| #endif |
| |
| __put_user(style, &addr->style); |
| __put_user(current_cpu_data.watch_reg_use_cnt, |
| &addr->WATCH_STYLE.num_valid); |
| for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { |
| __put_user(child->thread.watch.mips3264.watchlo[i], |
| &addr->WATCH_STYLE.watchlo[i]); |
| __put_user(child->thread.watch.mips3264.watchhi[i] & 0xfff, |
| &addr->WATCH_STYLE.watchhi[i]); |
| __put_user(current_cpu_data.watch_reg_masks[i], |
| &addr->WATCH_STYLE.watch_masks[i]); |
| } |
| for (; i < 8; i++) { |
| __put_user(0, &addr->WATCH_STYLE.watchlo[i]); |
| __put_user(0, &addr->WATCH_STYLE.watchhi[i]); |
| __put_user(0, &addr->WATCH_STYLE.watch_masks[i]); |
| } |
| |
| return 0; |
| } |
| |
| int ptrace_set_watch_regs(struct task_struct *child, |
| struct pt_watch_regs __user *addr) |
| { |
| int i; |
| int watch_active = 0; |
| unsigned long lt[NUM_WATCH_REGS]; |
| u16 ht[NUM_WATCH_REGS]; |
| |
| if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0) |
| return -EIO; |
| if (!access_ok(VERIFY_READ, addr, sizeof(struct pt_watch_regs))) |
| return -EIO; |
| /* Check the values. */ |
| for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { |
| __get_user(lt[i], &addr->WATCH_STYLE.watchlo[i]); |
| #ifdef CONFIG_32BIT |
| if (lt[i] & __UA_LIMIT) |
| return -EINVAL; |
| #else |
| if (test_tsk_thread_flag(child, TIF_32BIT_ADDR)) { |
| if (lt[i] & 0xffffffff80000000UL) |
| return -EINVAL; |
| } else { |
| if (lt[i] & __UA_LIMIT) |
| return -EINVAL; |
| } |
| #endif |
| __get_user(ht[i], &addr->WATCH_STYLE.watchhi[i]); |
| if (ht[i] & ~0xff8) |
| return -EINVAL; |
| } |
| /* Install them. */ |
| for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { |
| if (lt[i] & 7) |
| watch_active = 1; |
| child->thread.watch.mips3264.watchlo[i] = lt[i]; |
| /* Set the G bit. */ |
| child->thread.watch.mips3264.watchhi[i] = ht[i]; |
| } |
| |
| if (watch_active) |
| set_tsk_thread_flag(child, TIF_LOAD_WATCH); |
| else |
| clear_tsk_thread_flag(child, TIF_LOAD_WATCH); |
| |
| return 0; |
| } |
| |
| long arch_ptrace(struct task_struct *child, long request, |
| unsigned long addr, unsigned long data) |
| { |
| int ret; |
| void __user *addrp = (void __user *) addr; |
| void __user *datavp = (void __user *) data; |
| unsigned long __user *datalp = (void __user *) data; |
| |
| switch (request) { |
| /* when I and D space are separate, these will need to be fixed. */ |
| case PTRACE_PEEKTEXT: /* read word at location addr. */ |
| case PTRACE_PEEKDATA: |
| ret = generic_ptrace_peekdata(child, addr, data); |
| break; |
| |
| /* Read the word at location addr in the USER area. */ |
| case PTRACE_PEEKUSR: { |
| struct pt_regs *regs; |
| unsigned long tmp = 0; |
| |
| regs = task_pt_regs(child); |
| ret = 0; /* Default return value. */ |
| |
| switch (addr) { |
| case 0 ... 31: |
| tmp = regs->regs[addr]; |
| break; |
| case FPR_BASE ... FPR_BASE + 31: |
| if (tsk_used_math(child)) { |
| fpureg_t *fregs = get_fpu_regs(child); |
| |
| #ifdef CONFIG_32BIT |
| /* |
| * The odd registers are actually the high |
| * order bits of the values stored in the even |
| * registers - unless we're using r2k_switch.S. |
| */ |
| if (addr & 1) |
| tmp = (unsigned long) (fregs[((addr & ~1) - 32)] >> 32); |
| else |
| tmp = (unsigned long) (fregs[(addr - 32)] & 0xffffffff); |
| #endif |
| #ifdef CONFIG_64BIT |
| tmp = fregs[addr - FPR_BASE]; |
| #endif |
| } else { |
| tmp = -1; /* FP not yet used */ |
| } |
| break; |
| case PC: |
| tmp = regs->cp0_epc; |
| break; |
| case CAUSE: |
| tmp = regs->cp0_cause; |
| break; |
| case BADVADDR: |
| tmp = regs->cp0_badvaddr; |
| break; |
| case MMHI: |
| tmp = regs->hi; |
| break; |
| case MMLO: |
| tmp = regs->lo; |
| break; |
| #ifdef CONFIG_CPU_HAS_SMARTMIPS |
| case ACX: |
| tmp = regs->acx; |
| break; |
| #endif |
| case FPC_CSR: |
| tmp = child->thread.fpu.fcr31; |
| break; |
| case FPC_EIR: { /* implementation / version register */ |
| unsigned int flags; |
| #ifdef CONFIG_MIPS_MT_SMTC |
| unsigned long irqflags; |
| unsigned int mtflags; |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| |
| preempt_disable(); |
| if (!cpu_has_fpu) { |
| preempt_enable(); |
| break; |
| } |
| |
| #ifdef CONFIG_MIPS_MT_SMTC |
| /* Read-modify-write of Status must be atomic */ |
| local_irq_save(irqflags); |
| mtflags = dmt(); |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| if (cpu_has_mipsmt) { |
| unsigned int vpflags = dvpe(); |
| flags = read_c0_status(); |
| __enable_fpu(); |
| __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp)); |
| write_c0_status(flags); |
| evpe(vpflags); |
| } else { |
| flags = read_c0_status(); |
| __enable_fpu(); |
| __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp)); |
| write_c0_status(flags); |
| } |
| #ifdef CONFIG_MIPS_MT_SMTC |
| emt(mtflags); |
| local_irq_restore(irqflags); |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| preempt_enable(); |
| break; |
| } |
| case DSP_BASE ... DSP_BASE + 5: { |
| dspreg_t *dregs; |
| |
| if (!cpu_has_dsp) { |
| tmp = 0; |
| ret = -EIO; |
| goto out; |
| } |
| dregs = __get_dsp_regs(child); |
| tmp = (unsigned long) (dregs[addr - DSP_BASE]); |
| break; |
| } |
| case DSP_CONTROL: |
| if (!cpu_has_dsp) { |
| tmp = 0; |
| ret = -EIO; |
| goto out; |
| } |
| tmp = child->thread.dsp.dspcontrol; |
| break; |
| default: |
| tmp = 0; |
| ret = -EIO; |
| goto out; |
| } |
| ret = put_user(tmp, datalp); |
| break; |
| } |
| |
| /* when I and D space are separate, this will have to be fixed. */ |
| case PTRACE_POKETEXT: /* write the word at location addr. */ |
| case PTRACE_POKEDATA: |
| ret = generic_ptrace_pokedata(child, addr, data); |
| break; |
| |
| case PTRACE_POKEUSR: { |
| struct pt_regs *regs; |
| ret = 0; |
| regs = task_pt_regs(child); |
| |
| switch (addr) { |
| case 0 ... 31: |
| regs->regs[addr] = data; |
| break; |
| case FPR_BASE ... FPR_BASE + 31: { |
| fpureg_t *fregs = get_fpu_regs(child); |
| |
| if (!tsk_used_math(child)) { |
| /* FP not yet used */ |
| memset(&child->thread.fpu, ~0, |
| sizeof(child->thread.fpu)); |
| child->thread.fpu.fcr31 = 0; |
| } |
| #ifdef CONFIG_32BIT |
| /* |
| * The odd registers are actually the high order bits |
| * of the values stored in the even registers - unless |
| * we're using r2k_switch.S. |
| */ |
| if (addr & 1) { |
| fregs[(addr & ~1) - FPR_BASE] &= 0xffffffff; |
| fregs[(addr & ~1) - FPR_BASE] |= ((unsigned long long) data) << 32; |
| } else { |
| fregs[addr - FPR_BASE] &= ~0xffffffffLL; |
| fregs[addr - FPR_BASE] |= data; |
| } |
| #endif |
| #ifdef CONFIG_64BIT |
| fregs[addr - FPR_BASE] = data; |
| #endif |
| break; |
| } |
| case PC: |
| regs->cp0_epc = data; |
| break; |
| case MMHI: |
| regs->hi = data; |
| break; |
| case MMLO: |
| regs->lo = data; |
| break; |
| #ifdef CONFIG_CPU_HAS_SMARTMIPS |
| case ACX: |
| regs->acx = data; |
| break; |
| #endif |
| case FPC_CSR: |
| child->thread.fpu.fcr31 = data; |
| break; |
| case DSP_BASE ... DSP_BASE + 5: { |
| dspreg_t *dregs; |
| |
| if (!cpu_has_dsp) { |
| ret = -EIO; |
| break; |
| } |
| |
| dregs = __get_dsp_regs(child); |
| dregs[addr - DSP_BASE] = data; |
| break; |
| } |
| case DSP_CONTROL: |
| if (!cpu_has_dsp) { |
| ret = -EIO; |
| break; |
| } |
| child->thread.dsp.dspcontrol = data; |
| break; |
| default: |
| /* The rest are not allowed. */ |
| ret = -EIO; |
| break; |
| } |
| break; |
| } |
| |
| case PTRACE_GETREGS: |
| ret = ptrace_getregs(child, datavp); |
| break; |
| |
| case PTRACE_SETREGS: |
| ret = ptrace_setregs(child, datavp); |
| break; |
| |
| case PTRACE_GETFPREGS: |
| ret = ptrace_getfpregs(child, datavp); |
| break; |
| |
| case PTRACE_SETFPREGS: |
| ret = ptrace_setfpregs(child, datavp); |
| break; |
| |
| case PTRACE_GET_THREAD_AREA: |
| ret = put_user(task_thread_info(child)->tp_value, datalp); |
| break; |
| |
| case PTRACE_GET_WATCH_REGS: |
| ret = ptrace_get_watch_regs(child, addrp); |
| break; |
| |
| case PTRACE_SET_WATCH_REGS: |
| ret = ptrace_set_watch_regs(child, addrp); |
| break; |
| |
| default: |
| ret = ptrace_request(child, request, addr, data); |
| break; |
| } |
| out: |
| return ret; |
| } |
| |
| static inline int audit_arch(void) |
| { |
| int arch = EM_MIPS; |
| #ifdef CONFIG_64BIT |
| arch |= __AUDIT_ARCH_64BIT; |
| #endif |
| #if defined(__LITTLE_ENDIAN) |
| arch |= __AUDIT_ARCH_LE; |
| #endif |
| return arch; |
| } |
| |
| /* |
| * Notification of system call entry/exit |
| * - triggered by current->work.syscall_trace |
| */ |
| asmlinkage void syscall_trace_enter(struct pt_regs *regs) |
| { |
| /* do the secure computing check first */ |
| secure_computing(regs->regs[2]); |
| |
| if (!(current->ptrace & PT_PTRACED)) |
| goto out; |
| |
| if (!test_thread_flag(TIF_SYSCALL_TRACE)) |
| goto out; |
| |
| /* The 0x80 provides a way for the tracing parent to distinguish |
| between a syscall stop and SIGTRAP delivery */ |
| ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? |
| 0x80 : 0)); |
| |
| /* |
| * this isn't the same as continuing with a signal, but it will do |
| * for normal use. strace only continues with a signal if the |
| * stopping signal is not SIGTRAP. -brl |
| */ |
| if (current->exit_code) { |
| send_sig(current->exit_code, current, 1); |
| current->exit_code = 0; |
| } |
| |
| out: |
| audit_syscall_entry(audit_arch(), regs->regs[2], |
| regs->regs[4], regs->regs[5], |
| regs->regs[6], regs->regs[7]); |
| } |
| |
| /* |
| * Notification of system call entry/exit |
| * - triggered by current->work.syscall_trace |
| */ |
| asmlinkage void syscall_trace_leave(struct pt_regs *regs) |
| { |
| audit_syscall_exit(regs); |
| |
| if (!(current->ptrace & PT_PTRACED)) |
| return; |
| |
| if (!test_thread_flag(TIF_SYSCALL_TRACE)) |
| return; |
| |
| /* The 0x80 provides a way for the tracing parent to distinguish |
| between a syscall stop and SIGTRAP delivery */ |
| ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? |
| 0x80 : 0)); |
| |
| /* |
| * this isn't the same as continuing with a signal, but it will do |
| * for normal use. strace only continues with a signal if the |
| * stopping signal is not SIGTRAP. -brl |
| */ |
| if (current->exit_code) { |
| send_sig(current->exit_code, current, 1); |
| current->exit_code = 0; |
| } |
| } |