| /* |
| * Copyright (C) 2016 ST Microelectronics S.A. |
| * Copyright (C) 2010 Stollmann E+V GmbH |
| * Copyright (C) 2010 Trusted Logic S.A. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/version.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/i2c.h> |
| #include <linux/irq.h> |
| #include <linux/jiffies.h> |
| #include <linux/uaccess.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <linux/poll.h> |
| #include <linux/miscdevice.h> |
| #include <linux/spinlock.h> |
| #include <linux/of_gpio.h> |
| #ifndef LEGACY |
| #include <linux/workqueue.h> |
| #include <linux/acpi.h> |
| #include <linux/gpio/consumer.h> |
| #include <net/nfc/nci.h> |
| #include <linux/clk.h> |
| #else |
| #include <linux/gpio.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #endif |
| #include "st21nfc.h" |
| #include <soc/oppo/oppo_nfc.h> |
| |
| #define ST21NFCD_MTK |
| //#define ST54J_PWRSTATS |
| |
| #ifdef ST21NFCD_MTK |
| // Kernel 4.9 on some platforms is using legacy drivers (kernel-4.9-lc) |
| // I2C: CONFIG_MACH_MT6735 / 6735M / 6753 / 6580 / 6755 use legacy driver |
| // CLOCK: 4.9 has right includes, no need for special handling. |
| // GPIO : same as I2C -- we use the same condition at the moment. |
| //#if (defined(CONFIG_MACH_MT6735) || defined(CONFIG_MACH_MT6735M) || |
| // defined(CONFIG_MACH_MT6753) || defined(CONFIG_MACH_MT6580) || |
| // defined(CONFIG_MACH_MT6755)) |
| // test on I2C special define instead of listing the platforms |
| #ifdef CONFIG_MTK_I2C_EXTENSION |
| #define KRNMTKLEGACY_I2C 1 |
| #define KRNMTKLEGACY_GPIO 1 |
| #define KRNMTKLEGACY_CLK 1 |
| #endif |
| |
| /* Set NO_MTK_CLK_MANAGEMENT if using xtal integration */ |
| #ifndef NO_MTK_CLK_MANAGEMENT |
| #ifdef KRNMTKLEGACY_CLK |
| #include <mt_clkbuf_ctl.h> |
| #else |
| #include <mtk_clkbuf_ctl.h> |
| #endif |
| #endif |
| #endif // ST21NFCD_MTK |
| |
| #define MAX_BUFFER_SIZE 260 |
| #define HEADER_LENGTH 3 |
| #define IDLE_CHARACTER 0x7e |
| #define ST21NFC_POWER_STATE_MAX 3 |
| // wake up for the duration of a typical transaction |
| #define WAKEUP_SRC_TIMEOUT (500) |
| |
| #define DRIVER_VERSION "2.2.0.14" |
| |
| #define PROP_PWR_MON_RW_ON_NTF nci_opcode_pack(NCI_GID_PROPRIETARY, 5) |
| #define PROP_PWR_MON_RW_OFF_NTF nci_opcode_pack(NCI_GID_PROPRIETARY, 6) |
| |
| #define I2C_ID_NAME "st21nfc" |
| |
| #ifdef KRNMTKLEGACY_I2C |
| #include <linux/dma-mapping.h> |
| #define NFC_CLIENT_TIMING 400 /* I2C speed */ |
| static char *I2CDMAWriteBuf; /*= NULL;*/ /* unnecessary initialise */ |
| static unsigned int I2CDMAWriteBuf_pa; /* = NULL; */ |
| static char *I2CDMAReadBuf; /*= NULL;*/ /* unnecessary initialise */ |
| static unsigned int I2CDMAReadBuf_pa; /* = NULL; */ |
| #endif /* KRNMTKLEGACY_I2C */ |
| |
| static bool enable_debug_log; |
| |
| /*The enum is used to index a pw_states array, the values matter here*/ |
| enum st21nfc_power_state { |
| ST21NFC_IDLE = 0, |
| ST21NFC_ACTIVE = 1, |
| ST21NFC_ACTIVE_RW = 2 |
| }; |
| |
| static const char *const st21nfc_power_state_name[] = {"IDLE", "ACTIVE", |
| "ACTIVE_RW"}; |
| |
| enum st21nfc_read_state { ST21NFC_HEADER, ST21NFC_PAYLOAD }; |
| |
| struct nfc_sub_power_stats { |
| uint64_t count; |
| uint64_t duration; |
| uint64_t last_entry; |
| uint64_t last_exit; |
| }; |
| |
| struct nfc_sub_power_stats_error { |
| /* error transition header --> payload state machine */ |
| uint64_t header_payload; |
| /* error transition from an active state when not in idle state */ |
| uint64_t active_not_idle; |
| /* error transition from idle state to idle state */ |
| uint64_t idle_to_idle; |
| /* warning transition from active_rw state to idle state */ |
| uint64_t active_rw_to_idle; |
| /* error transition from active state to active state */ |
| uint64_t active_to_active; |
| /* error transition from idle state to active state with notification */ |
| uint64_t idle_to_active_ntf; |
| /* error transition from active_rw state to active_rw state */ |
| uint64_t act_rw_to_act_rw; |
| /* error transition from idle state to */ |
| /* active_rw state with notification */ |
| uint64_t idle_to_active_rw_ntf; |
| }; |
| |
| /* |
| * The member 'polarity_mode' defines |
| * how the wakeup pin is configured and handled. |
| * it can take the following values : |
| * IRQF_TRIGGER_RISING |
| * IRQF_TRIGGER_HIGH |
| */ |
| struct st21nfc_device { |
| wait_queue_head_t read_wq; |
| struct mutex read_mutex; |
| struct mutex pidle_mutex; |
| struct i2c_client *client; |
| struct miscdevice st21nfc_device; |
| uint8_t buffer[MAX_BUFFER_SIZE]; |
| bool irq_enabled; |
| bool irq_wake_up; |
| bool irq_is_attached; |
| bool device_open; /* Is device open? */ |
| spinlock_t irq_enabled_lock; |
| enum st21nfc_power_state pw_current; |
| enum st21nfc_read_state r_state_current; |
| int irq_pw_stats_idle; |
| int p_idle_last; |
| struct nfc_sub_power_stats pw_states[ST21NFC_POWER_STATE_MAX]; |
| struct nfc_sub_power_stats_error pw_states_err; |
| struct workqueue_struct *st_p_wq; |
| struct work_struct st_p_work; |
| /*Power state shadow copies for reading*/ |
| enum st21nfc_power_state c_pw_current; |
| struct nfc_sub_power_stats c_pw_states[ST21NFC_POWER_STATE_MAX]; |
| struct nfc_sub_power_stats_error c_pw_states_err; |
| |
| /* CLK control */ |
| bool clk_run; |
| struct clk *s_clk; |
| uint8_t pinctrl_en; |
| |
| /* GPIO for NFCC IRQ pin (input) */ |
| struct gpio_desc *gpiod_irq; |
| /* GPIO for NFCC Reset pin (output) */ |
| struct gpio_desc *gpiod_reset; |
| /* GPIO for NFCC CLK_REQ pin (input) */ |
| struct gpio_desc *gpiod_clkreq; |
| /* GPIO for NFCC CLF_MONITOR_PWR (input) */ |
| struct gpio_desc *gpiod_pidle; |
| /* irq_gpio polarity to be used */ |
| unsigned int polarity_mode; |
| }; |
| |
| /* |
| * Routine to enable clock. |
| * this routine can be extended to select from multiple |
| * sources based on clk_src_name. |
| */ |
| static int st21nfc_clock_select(struct st21nfc_device *st21nfc_dev) { |
| #ifdef ST21NFCD_MTK |
| #ifndef NO_MTK_CLK_MANAGEMENT |
| /*If use XTAL mode, please remove this function "clk_buf_ctrl" to |
| *avoid additional power consumption. |
| */ |
| clk_buf_ctrl(CLK_BUF_NFC, true); |
| #endif |
| return 0; |
| #else // ST21NFCD_MTK |
| int ret = 0; |
| st21nfc_dev->s_clk = clk_get(&st21nfc_dev->client->dev, "nfc_ref_clk"); |
| |
| /* if NULL we assume external crystal and dont fail */ |
| if ((st21nfc_dev->s_clk == NULL) || IS_ERR(st21nfc_dev->s_clk)) return 0; |
| |
| if (st21nfc_dev->clk_run == false) { |
| ret = clk_prepare_enable(st21nfc_dev->s_clk); |
| |
| if (ret) goto err_clk; |
| |
| st21nfc_dev->clk_run = true; |
| } |
| return ret; |
| |
| err_clk: |
| return -EINVAL; |
| #endif // ST21NFCD_MTK |
| } |
| |
| /* |
| * Routine to disable clocks |
| */ |
| static int st21nfc_clock_deselect(struct st21nfc_device *st21nfc_dev) { |
| #ifdef ST21NFCD_MTK |
| #ifndef NO_MTK_CLK_MANAGEMENT |
| clk_buf_ctrl(CLK_BUF_NFC, false); |
| #endif |
| return 0; |
| #else // ST21NFCD_MTK |
| /* if NULL we assume external crystal and dont fail */ |
| if ((st21nfc_dev->s_clk == NULL) || IS_ERR(st21nfc_dev->s_clk)) return 0; |
| |
| if (st21nfc_dev->clk_run == true) { |
| clk_disable_unprepare(st21nfc_dev->s_clk); |
| st21nfc_dev->clk_run = false; |
| } |
| return 0; |
| #endif // ST21NFCD_MTK |
| } |
| |
| static void st21nfc_disable_irq(struct st21nfc_device *st21nfc_dev) { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&st21nfc_dev->irq_enabled_lock, flags); |
| if (st21nfc_dev->irq_enabled) { |
| disable_irq_nosync(st21nfc_dev->client->irq); |
| st21nfc_dev->irq_enabled = false; |
| } |
| spin_unlock_irqrestore(&st21nfc_dev->irq_enabled_lock, flags); |
| } |
| |
| static void st21nfc_enable_irq(struct st21nfc_device *st21nfc_dev) { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&st21nfc_dev->irq_enabled_lock, flags); |
| if (!st21nfc_dev->irq_enabled) { |
| st21nfc_dev->irq_enabled = true; |
| enable_irq(st21nfc_dev->client->irq); |
| } |
| spin_unlock_irqrestore(&st21nfc_dev->irq_enabled_lock, flags); |
| } |
| |
| static irqreturn_t st21nfc_dev_irq_handler(int irq, void *dev_id) { |
| struct st21nfc_device *st21nfc_dev = dev_id; |
| |
| if (device_may_wakeup(&st21nfc_dev->client->dev)) |
| pm_wakeup_event(&st21nfc_dev->client->dev, WAKEUP_SRC_TIMEOUT); |
| st21nfc_disable_irq(st21nfc_dev); |
| |
| /* Wake up waiting readers */ |
| wake_up(&st21nfc_dev->read_wq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int st21nfc_loc_set_polaritymode(struct st21nfc_device *st21nfc_dev, |
| int mode) { |
| struct i2c_client *client = st21nfc_dev->client; |
| struct device *dev = &client->dev; |
| unsigned int irq_type; |
| int ret; |
| |
| if (enable_debug_log) pr_info("%s:%d mode %d", __FILE__, __LINE__, mode); |
| |
| st21nfc_dev->polarity_mode = mode; |
| /* setup irq_flags */ |
| switch (mode) { |
| case IRQF_TRIGGER_RISING: |
| irq_type = IRQ_TYPE_EDGE_RISING; |
| break; |
| case IRQF_TRIGGER_HIGH: |
| irq_type = IRQ_TYPE_LEVEL_HIGH; |
| break; |
| default: |
| irq_type = IRQ_TYPE_EDGE_RISING; |
| break; |
| } |
| if (st21nfc_dev->irq_is_attached) { |
| devm_free_irq(dev, client->irq, st21nfc_dev); |
| st21nfc_dev->irq_is_attached = false; |
| } |
| ret = irq_set_irq_type(client->irq, irq_type); |
| if (ret) { |
| pr_err("%s : set_irq_type failed\n", __func__); |
| return -ENODEV; |
| } |
| /* request irq. the irq is set whenever the chip has data available |
| * for reading. it is cleared when all data has been read. |
| */ |
| if (enable_debug_log) |
| pr_debug("%s : requesting IRQ %d\n", __func__, client->irq); |
| st21nfc_dev->irq_enabled = true; |
| |
| ret = devm_request_irq(dev, client->irq, st21nfc_dev_irq_handler, |
| st21nfc_dev->polarity_mode, client->name, st21nfc_dev); |
| if (ret) { |
| pr_err("%s : devm_request_irq failed\n", __func__); |
| return -ENODEV; |
| } |
| st21nfc_dev->irq_is_attached = true; |
| st21nfc_disable_irq(st21nfc_dev); |
| |
| if (enable_debug_log) pr_info("%s:%d ret %d", __FILE__, __LINE__, ret); |
| return ret; |
| } |
| |
| static void st21nfc_power_stats_switch(struct st21nfc_device *st21nfc_dev, |
| uint64_t current_time_ms, |
| enum st21nfc_power_state old_state, |
| enum st21nfc_power_state new_state, |
| bool is_ntf) { |
| mutex_lock(&st21nfc_dev->pidle_mutex); |
| |
| if (new_state == old_state) { |
| if ((st21nfc_dev->pw_states[ST21NFC_IDLE].last_entry != 0) || |
| (old_state != ST21NFC_IDLE)) { |
| pr_err("%s Error: Switched from %s to %s!: %llx, ntf=%d\n", __func__, |
| st21nfc_power_state_name[old_state], |
| st21nfc_power_state_name[new_state], current_time_ms, is_ntf); |
| if (new_state == ST21NFC_IDLE) |
| st21nfc_dev->pw_states_err.idle_to_idle++; |
| else if (new_state == ST21NFC_ACTIVE) |
| st21nfc_dev->pw_states_err.active_to_active++; |
| else if (new_state == ST21NFC_ACTIVE_RW) |
| st21nfc_dev->pw_states_err.act_rw_to_act_rw++; |
| |
| mutex_unlock(&st21nfc_dev->pidle_mutex); |
| return; |
| } |
| } else if (!is_ntf && new_state == ST21NFC_ACTIVE && |
| old_state != ST21NFC_IDLE) { |
| st21nfc_dev->pw_states_err.active_not_idle++; |
| } else if (!is_ntf && new_state == ST21NFC_IDLE && |
| old_state == ST21NFC_ACTIVE_RW) { |
| st21nfc_dev->pw_states_err.active_rw_to_idle++; |
| } else if (is_ntf && new_state == ST21NFC_ACTIVE && |
| old_state == ST21NFC_IDLE) { |
| st21nfc_dev->pw_states_err.idle_to_active_ntf++; |
| } else if (is_ntf && new_state == ST21NFC_ACTIVE_RW && |
| old_state == ST21NFC_IDLE) { |
| st21nfc_dev->pw_states_err.idle_to_active_rw_ntf++; |
| } |
| |
| pr_debug("%s Switching from %s to %s: %llx, ntf=%d\n", __func__, |
| st21nfc_power_state_name[old_state], |
| st21nfc_power_state_name[new_state], current_time_ms, is_ntf); |
| st21nfc_dev->pw_states[old_state].last_exit = current_time_ms; |
| st21nfc_dev->pw_states[old_state].duration += |
| st21nfc_dev->pw_states[old_state].last_exit - |
| st21nfc_dev->pw_states[old_state].last_entry; |
| st21nfc_dev->pw_states[new_state].count++; |
| st21nfc_dev->pw_current = new_state; |
| st21nfc_dev->pw_states[new_state].last_entry = current_time_ms; |
| |
| mutex_unlock(&st21nfc_dev->pidle_mutex); |
| } |
| |
| static void st21nfc_power_stats_idle_signal( |
| struct st21nfc_device *st21nfc_dev) { |
| uint64_t current_time_ms = ktime_to_ms(ktime_get_boottime()); |
| int value = gpiod_get_value(st21nfc_dev->gpiod_pidle); |
| |
| if (value != 0) { |
| st21nfc_power_stats_switch(st21nfc_dev, current_time_ms, |
| st21nfc_dev->pw_current, ST21NFC_ACTIVE, false); |
| } else { |
| st21nfc_power_stats_switch(st21nfc_dev, current_time_ms, |
| st21nfc_dev->pw_current, ST21NFC_IDLE, false); |
| } |
| } |
| |
| void st21nfc_pstate_wq(struct work_struct *work) { |
| struct st21nfc_device *st21nfc_dev = |
| container_of(work, struct st21nfc_device, st_p_work); |
| |
| st21nfc_power_stats_idle_signal(st21nfc_dev); |
| } |
| |
| static irqreturn_t st21nfc_dev_power_stats_handler(int irq, void *dev_id) { |
| struct st21nfc_device *st21nfc_dev = dev_id; |
| |
| queue_work(st21nfc_dev->st_p_wq, &(st21nfc_dev->st_p_work)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef ST54J_PWRSTATS |
| static void st21nfc_power_stats_filter(struct st21nfc_device *st21nfc_dev, |
| char *buf, size_t count) { |
| uint64_t current_time_ms = ktime_to_ms(ktime_get_boottime()); |
| __u16 ntf_opcode = nci_opcode(buf); |
| |
| if (IS_ERR(st21nfc_dev->gpiod_pidle)) return; |
| |
| /* In order to avoid counting active state on PAYLOAD where it would |
| * match a possible header, power states are filtered only on NCI |
| * headers. |
| */ |
| if (st21nfc_dev->r_state_current != ST21NFC_HEADER) return; |
| |
| if (count != HEADER_LENGTH) { |
| pr_err("%s Warning: expect previous one was idle data\n"); |
| st21nfc_dev->pw_states_err.header_payload++; |
| return; |
| } |
| |
| if (nci_mt(buf) != NCI_MT_NTF_PKT && |
| nci_opcode_gid(ntf_opcode) != NCI_GID_PROPRIETARY) |
| return; |
| |
| switch (ntf_opcode) { |
| case PROP_PWR_MON_RW_OFF_NTF: |
| st21nfc_power_stats_switch(st21nfc_dev, current_time_ms, |
| st21nfc_dev->pw_current, ST21NFC_ACTIVE, true); |
| break; |
| case PROP_PWR_MON_RW_ON_NTF: |
| st21nfc_power_stats_switch(st21nfc_dev, current_time_ms, |
| st21nfc_dev->pw_current, ST21NFC_ACTIVE_RW, |
| true); |
| break; |
| default: |
| return; |
| } |
| return; |
| } |
| #endif |
| |
| static ssize_t st21nfc_dev_read(struct file *filp, char __user *buf, |
| size_t count, loff_t *offset) { |
| struct st21nfc_device *st21nfc_dev = |
| container_of(filp->private_data, struct st21nfc_device, st21nfc_device); |
| int ret; |
| #ifdef ST54J_PWRSTATS |
| int idle = 0; |
| #endif // ST54J_PWRSTATS |
| |
| if (count == 0) return 0; |
| |
| if (count > MAX_BUFFER_SIZE) count = MAX_BUFFER_SIZE; |
| |
| if (enable_debug_log) pr_debug("%s : reading %zu bytes.\n", __func__, count); |
| |
| if (0 == gpiod_get_value(st21nfc_dev->gpiod_irq)) { |
| pr_info("%s : read called but no IRQ.\n", __func__); |
| memset(st21nfc_dev->buffer, 0x7E, count); |
| if (copy_to_user(buf, st21nfc_dev->buffer, count)) { |
| pr_warn("%s : failed to copy to user space\n", __func__); |
| return -EFAULT; |
| } |
| return count; |
| } |
| |
| mutex_lock(&st21nfc_dev->read_mutex); |
| |
| /* Read data */ |
| #ifdef KRNMTKLEGACY_I2C |
| st21nfc_dev->client->addr = (st21nfc_dev->client->addr & I2C_MASK_FLAG); |
| st21nfc_dev->client->ext_flag |= I2C_DMA_FLAG; |
| /* st21nfc_dev->platform_data.client->ext_flag |= I2C_DIRECTION_FLAG; */ |
| /* st21nfc_dev->platform_data.client->ext_flag |= I2C_A_FILTER_MSG; */ |
| st21nfc_dev->client->timing = NFC_CLIENT_TIMING; |
| |
| /* Read data */ |
| ret = i2c_master_recv(st21nfc_dev->client, |
| (unsigned char *)(uintptr_t)I2CDMAReadBuf_pa, count); |
| /* copy back to buffer */ |
| if (ret > 0) { |
| memcpy(st21nfc_dev->buffer, (unsigned char *)(uintptr_t)I2CDMAReadBuf_pa, |
| ret); |
| } |
| #else |
| ret = i2c_master_recv(st21nfc_dev->client, st21nfc_dev->buffer, count); |
| #endif |
| #ifdef ST54J_PWRSTATS |
| if (ret < 0) { |
| pr_err("%s: i2c_master_recv returned %d\n", __func__, ret); |
| mutex_unlock(&st21nfc_dev->read_mutex); |
| return ret; |
| } |
| if (st21nfc_dev->r_state_current == ST21NFC_HEADER) { |
| /* Counting idle index */ |
| for (idle = 0; idle < ret && st21nfc_dev->buffer[idle] == IDLE_CHARACTER; |
| idle++) |
| ; |
| |
| if (idle > 0 && idle < HEADER_LENGTH) { |
| memmove(st21nfc_dev->buffer, st21nfc_dev->buffer + idle, ret - idle); |
| ret = i2c_master_recv(st21nfc_dev->client, |
| st21nfc_dev->buffer + ret - idle, idle); |
| if (ret < 0) { |
| pr_err("%s: i2c_master_recv returned %d\n", __func__, ret); |
| mutex_unlock(&st21nfc_dev->read_mutex); |
| return ret; |
| } |
| ret = count; |
| } |
| } |
| #endif // ST54J_PWRSTATS |
| mutex_unlock(&st21nfc_dev->read_mutex); |
| |
| if (ret < 0) { |
| pr_err("%s: i2c_master_recv returned %d\n", __func__, ret); |
| return ret; |
| } |
| if (ret > count) { |
| pr_err("%s: received too many bytes from i2c (%d)\n", __func__, ret); |
| return -EIO; |
| } |
| |
| #ifdef ST54J_PWRSTATS |
| if (idle < HEADER_LENGTH) { |
| st21nfc_power_stats_filter(st21nfc_dev, st21nfc_dev->buffer, ret); |
| /* change state only if a payload is detected, i.e. size > 0*/ |
| if ((st21nfc_dev->r_state_current == ST21NFC_HEADER) && |
| (st21nfc_dev->buffer[2] > 0)) { |
| st21nfc_dev->r_state_current = ST21NFC_PAYLOAD; |
| if (enable_debug_log) |
| pr_debug("%s : new state = ST21NFC_PAYLOAD\n", __func__); |
| } else { |
| st21nfc_dev->r_state_current = ST21NFC_HEADER; |
| if (enable_debug_log) |
| pr_debug("%s : new state = ST21NFC_HEADER\n", __func__); |
| } |
| } |
| #endif // ST54J_PWRSTATS |
| |
| if (copy_to_user(buf, st21nfc_dev->buffer, ret)) { |
| pr_warn("%s : failed to copy to user space\n", __func__); |
| return -EFAULT; |
| } |
| |
| return ret; |
| } |
| |
| static ssize_t st21nfc_dev_write(struct file *filp, const char __user *buf, |
| size_t count, loff_t *offset) { |
| struct st21nfc_device *st21nfc_dev = |
| container_of(filp->private_data, struct st21nfc_device, st21nfc_device); |
| char *tmp = NULL; |
| int ret = count; |
| |
| if (enable_debug_log) { |
| //pr_debug("%s: st21nfc_dev ptr %p\n", __func__, st21nfc_dev); |
| pr_debug("%s : writing %zu bytes.\n", __func__, count); |
| } |
| |
| if (count > MAX_BUFFER_SIZE) count = MAX_BUFFER_SIZE; |
| |
| tmp = memdup_user(buf, count); |
| if (IS_ERR(tmp)) { |
| pr_err("%s : memdup_user failed\n", __func__); |
| return -EFAULT; |
| } |
| |
| /* Write data */ |
| #ifdef KRNMTKLEGACY_I2C |
| memcpy(I2CDMAWriteBuf, tmp, count); |
| st21nfc_dev->client->addr = (st21nfc_dev->client->addr & I2C_MASK_FLAG); |
| |
| st21nfc_dev->client->ext_flag |= I2C_DMA_FLAG; |
| /* st21nfc_dev->platform_data.client->ext_flag |= I2C_DIRECTION_FLAG; */ |
| /* st21nfc_dev->platform_data.client->ext_flag |= I2C_A_FILTER_MSG; */ |
| st21nfc_dev->client->timing = NFC_CLIENT_TIMING; |
| |
| ret = i2c_master_send(st21nfc_dev->client, |
| (unsigned char *)(uintptr_t)I2CDMAWriteBuf_pa, count); |
| #else |
| ret = i2c_master_send(st21nfc_dev->client, tmp, count); |
| #endif |
| if (ret != count) { |
| pr_err("%s : i2c_master_send returned %d\n", __func__, ret); |
| ret = -EIO; |
| } |
| kfree(tmp); |
| |
| return ret; |
| } |
| |
| static int st21nfc_dev_open(struct inode *inode, struct file *filp) { |
| int ret = 0; |
| struct st21nfc_device *st21nfc_dev = |
| container_of(filp->private_data, struct st21nfc_device, st21nfc_device); |
| |
| if (enable_debug_log) pr_info("%s:%d dev_open", __FILE__, __LINE__); |
| |
| if (st21nfc_dev->device_open) { |
| ret = -EBUSY; |
| pr_err("%s : device already opened ret= %d\n", __func__, ret); |
| } else { |
| st21nfc_dev->device_open = true; |
| } |
| return ret; |
| } |
| |
| static int st21nfc_release(struct inode *inode, struct file *file) { |
| struct st21nfc_device *st21nfc_dev = |
| container_of(file->private_data, struct st21nfc_device, st21nfc_device); |
| |
| st21nfc_dev->device_open = false; |
| if (enable_debug_log) pr_debug("%s : device_open = false\n", __func__); |
| return 0; |
| } |
| |
| static void (*st21nfc_st54spi_cb)(int, void *); |
| static void *st21nfc_st54spi_data; |
| void st21nfc_register_st54spi_cb(void (*cb)(int, void *), void *data) { |
| if (enable_debug_log) pr_info("%s\n", __func__); |
| st21nfc_st54spi_cb = cb; |
| st21nfc_st54spi_data = data; |
| } |
| void st21nfc_unregister_st54spi_cb(void) { |
| if (enable_debug_log) pr_info("%s\n", __func__); |
| st21nfc_st54spi_cb = NULL; |
| st21nfc_st54spi_data = NULL; |
| } |
| |
| static long st21nfc_dev_ioctl(struct file *filp, unsigned int cmd, |
| unsigned long arg) { |
| struct st21nfc_device *st21nfc_dev = |
| container_of(filp->private_data, struct st21nfc_device, st21nfc_device); |
| |
| int ret = 0; |
| |
| u32 tmp; |
| |
| /* Check type and command number */ |
| if (_IOC_TYPE(cmd) != ST21NFC_MAGIC) return -ENOTTY; |
| |
| /* Check access direction once here; don't repeat below. |
| * IOC_DIR is from the user perspective, while access_ok is |
| * from the kernel perspective; so they look reversed. |
| */ |
| if (_IOC_DIR(cmd) & _IOC_READ) |
| ret = !access_ok(VERIFY_WRITE, (void __user *)arg, _IOC_SIZE(cmd)); |
| if (ret == 0 && _IOC_DIR(cmd) & _IOC_WRITE) |
| ret = !access_ok(VERIFY_READ, (void __user *)arg, _IOC_SIZE(cmd)); |
| if (ret) return -EFAULT; |
| |
| switch (cmd) { |
| case ST21NFC_SET_POLARITY_RISING: |
| case ST21NFC_LEGACY_SET_POLARITY_RISING: |
| pr_info(" ### ST21NFC_SET_POLARITY_RISING ###\n"); |
| st21nfc_loc_set_polaritymode(st21nfc_dev, IRQF_TRIGGER_RISING); |
| break; |
| |
| case ST21NFC_SET_POLARITY_HIGH: |
| case ST21NFC_LEGACY_SET_POLARITY_HIGH: |
| pr_info(" ### ST21NFC_SET_POLARITY_HIGH ###\n"); |
| st21nfc_loc_set_polaritymode(st21nfc_dev, IRQF_TRIGGER_HIGH); |
| break; |
| |
| case ST21NFC_PULSE_RESET: |
| case ST21NFC_LEGACY_PULSE_RESET: |
| pr_info("%s Double Pulse Request\n", __func__); |
| if (!IS_ERR(st21nfc_dev->gpiod_reset)) { |
| if (st21nfc_st54spi_cb != 0) |
| (*st21nfc_st54spi_cb)(ST54SPI_CB_RESET_START, st21nfc_st54spi_data); |
| /* pulse low for 20 millisecs */ |
| gpiod_set_value(st21nfc_dev->gpiod_reset, 0); |
| msleep(20); |
| gpiod_set_value(st21nfc_dev->gpiod_reset, 1); |
| usleep_range(10000, 11000); |
| /* pulse low for 20 millisecs */ |
| gpiod_set_value(st21nfc_dev->gpiod_reset, 0); |
| msleep(20); |
| gpiod_set_value(st21nfc_dev->gpiod_reset, 1); |
| pr_info("%s done Double Pulse Request\n", __func__); |
| if (st21nfc_st54spi_cb != 0) |
| (*st21nfc_st54spi_cb)(ST54SPI_CB_RESET_END, st21nfc_st54spi_data); |
| } |
| st21nfc_dev->r_state_current = ST21NFC_HEADER; |
| break; |
| |
| case ST21NFC_GET_WAKEUP: |
| case ST21NFC_LEGACY_GET_WAKEUP: |
| /* deliver state of Wake_up_pin as return value of ioctl */ |
| ret = gpiod_get_value(st21nfc_dev->gpiod_irq); |
| /* |
| * Warning: depending on gpiod_get_value implementation, |
| * it can returns a value different than 1 in case of high level |
| */ |
| if (ret != 0) ret = 1; |
| |
| if (enable_debug_log) pr_debug("%s get gpio result %d\n", __func__, ret); |
| break; |
| case ST21NFC_GET_POLARITY: |
| case ST21NFC_LEGACY_GET_POLARITY: |
| ret = st21nfc_dev->polarity_mode; |
| if (enable_debug_log) pr_debug("%s get polarity %d\n", __func__, ret); |
| break; |
| case ST21NFC_RECOVERY: |
| case ST21NFC_LEGACY_RECOVERY: |
| /* For ST21NFCD usage only */ |
| pr_info("%s Recovery Request\n", __func__); |
| if (!IS_ERR(st21nfc_dev->gpiod_reset)) { |
| if (st21nfc_dev->irq_is_attached) { |
| devm_free_irq(&st21nfc_dev->client->dev, st21nfc_dev->client->irq, |
| st21nfc_dev); |
| st21nfc_dev->irq_is_attached = false; |
| } |
| /* pulse low for 20 millisecs */ |
| gpiod_set_value(st21nfc_dev->gpiod_reset, 0); |
| usleep_range(10000, 11000); |
| /* During the reset, force IRQ OUT as */ |
| /* DH output instead of input in normal usage */ |
| ret = gpiod_direction_output(st21nfc_dev->gpiod_irq, 1); |
| if (ret) { |
| pr_err("%s : gpiod_direction_output failed\n", __func__); |
| ret = -ENODEV; |
| break; |
| } |
| |
| gpiod_set_value(st21nfc_dev->gpiod_irq, 1); |
| usleep_range(10000, 11000); |
| gpiod_set_value(st21nfc_dev->gpiod_reset, 1); |
| |
| pr_info("%s done Pulse Request\n", __func__); |
| } |
| msleep(20); |
| gpiod_set_value(st21nfc_dev->gpiod_irq, 0); |
| msleep(20); |
| gpiod_set_value(st21nfc_dev->gpiod_irq, 1); |
| msleep(20); |
| gpiod_set_value(st21nfc_dev->gpiod_irq, 0); |
| msleep(20); |
| pr_info("%s Recovery procedure finished\n", __func__); |
| ret = gpiod_direction_input(st21nfc_dev->gpiod_irq); |
| if (ret) { |
| pr_err("%s : gpiod_direction_input failed\n", __func__); |
| ret = -ENODEV; |
| } |
| break; |
| case ST21NFC_USE_ESE: |
| ret = __get_user(tmp, (u32 __user *)arg); |
| if (ret == 0) { |
| if (st21nfc_st54spi_cb != 0) |
| (*st21nfc_st54spi_cb)( |
| tmp ? ST54SPI_CB_ESE_USED : ST54SPI_CB_ESE_NOT_USED, |
| st21nfc_st54spi_data); |
| } |
| if (enable_debug_log) |
| pr_debug("%s use ESE %d : %d\n", __func__, ret, tmp); |
| break; |
| default: |
| pr_err("%s bad ioctl %u\n", __func__, cmd); |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static unsigned int st21nfc_poll(struct file *file, poll_table *wait) { |
| struct st21nfc_device *st21nfc_dev = |
| container_of(file->private_data, struct st21nfc_device, st21nfc_device); |
| unsigned int mask = 0; |
| int pinlev = 0; |
| |
| /* wait for Wake_up_pin == high */ |
| poll_wait(file, &st21nfc_dev->read_wq, wait); |
| |
| pinlev = gpiod_get_value(st21nfc_dev->gpiod_irq); |
| |
| if (pinlev != 0) { |
| if (enable_debug_log) pr_debug("%s return ready\n", __func__); |
| mask = POLLIN | POLLRDNORM; /* signal data avail */ |
| st21nfc_disable_irq(st21nfc_dev); |
| } else { |
| /* Wake_up_pin is low. Activate ISR */ |
| if (!st21nfc_dev->irq_enabled) { |
| if (enable_debug_log) pr_debug("%s enable irq\n", __func__); |
| st21nfc_enable_irq(st21nfc_dev); |
| } else { |
| if (enable_debug_log) pr_debug("%s irq already enabled\n", __func__); |
| } |
| } |
| return mask; |
| } |
| |
| #ifdef ST21NFCD_MTK |
| #ifndef KRNMTKLEGACY_GPIO |
| static int st21nfc_platform_probe(struct platform_device *pdev) { |
| if (enable_debug_log) pr_debug("%s\n", __func__); |
| return 0; |
| } |
| |
| static int st21nfc_platform_remove(struct platform_device *pdev) { |
| if (enable_debug_log) pr_debug("%s\n", __func__); |
| return 0; |
| } |
| #endif /* KRNMTKLEGACY_GPIO */ |
| #endif /* ST21NFCD_MTK */ |
| |
| static const struct file_operations st21nfc_dev_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .read = st21nfc_dev_read, |
| .write = st21nfc_dev_write, |
| .open = st21nfc_dev_open, |
| .poll = st21nfc_poll, |
| .release = st21nfc_release, |
| .unlocked_ioctl = st21nfc_dev_ioctl, |
| #ifdef CONFIG_COMPAT |
| .compat_ioctl = st21nfc_dev_ioctl |
| #endif |
| }; |
| |
| static ssize_t i2c_addr_show(struct device *dev, struct device_attribute *attr, |
| char *buf) { |
| struct i2c_client *client = to_i2c_client(dev); |
| |
| if (client != NULL) |
| return scnprintf(buf, PAGE_SIZE, "0x%.2x\n", client->addr); |
| return -ENODEV; |
| } /* i2c_addr_show() */ |
| |
| static ssize_t i2c_addr_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) { |
| struct st21nfc_device *data = dev_get_drvdata(dev); |
| long new_addr = 0; |
| |
| if (data != NULL && data->client != NULL) { |
| if (!kstrtol(buf, 10, &new_addr)) { |
| mutex_lock(&data->read_mutex); |
| data->client->addr = new_addr; |
| mutex_unlock(&data->read_mutex); |
| return count; |
| } |
| return -EINVAL; |
| } |
| return 0; |
| } /* i2c_addr_store() */ |
| |
| static ssize_t version_show(struct device *dev, struct device_attribute *attr, |
| char *buf) { |
| return scnprintf(buf, PAGE_SIZE, "%s\n", DRIVER_VERSION); |
| } /* version_show */ |
| |
| static uint64_t st21nfc_power_duration(struct st21nfc_device *data, |
| enum st21nfc_power_state pstate, |
| uint64_t current_time_ms) { |
| return data->c_pw_current != pstate |
| ? data->c_pw_states[pstate].duration |
| : data->c_pw_states[pstate].duration + |
| (current_time_ms - data->c_pw_states[pstate].last_entry); |
| } |
| |
| static ssize_t power_stats_show(struct device *dev, |
| struct device_attribute *attr, char *buf) { |
| struct st21nfc_device *data = dev_get_drvdata(dev); |
| uint64_t current_time_ms; |
| uint64_t idle_duration; |
| uint64_t active_ce_duration; |
| uint64_t active_rw_duration; |
| |
| mutex_lock(&data->pidle_mutex); |
| |
| data->c_pw_current = data->pw_current; |
| data->c_pw_states_err = data->pw_states_err; |
| memcpy(data->c_pw_states, data->pw_states, |
| ST21NFC_POWER_STATE_MAX * sizeof(struct nfc_sub_power_stats)); |
| |
| mutex_unlock(&data->pidle_mutex); |
| |
| current_time_ms = ktime_to_ms(ktime_get_boottime()); |
| idle_duration = st21nfc_power_duration(data, ST21NFC_IDLE, current_time_ms); |
| active_ce_duration = |
| st21nfc_power_duration(data, ST21NFC_ACTIVE, current_time_ms); |
| active_rw_duration = |
| st21nfc_power_duration(data, ST21NFC_ACTIVE_RW, current_time_ms); |
| |
| return scnprintf( |
| buf, PAGE_SIZE, |
| "NFC subsystem\n" |
| "Idle mode:\n" |
| "\tCumulative count: 0x%llx\n" |
| "\tCumulative duration msec: 0x%llx\n" |
| "\tLast entry timestamp msec: 0x%llx\n" |
| "\tLast exit timestamp msec: 0x%llx\n" |
| "Active mode:\n" |
| "\tCumulative count: 0x%llx\n" |
| "\tCumulative duration msec: 0x%llx\n" |
| "\tLast entry timestamp msec: 0x%llx\n" |
| "\tLast exit timestamp msec: 0x%llx\n" |
| "Active Reader/Writer mode:\n" |
| "\tCumulative count: 0x%llx\n" |
| "\tCumulative duration msec: 0x%llx\n" |
| "\tLast entry timestamp msec: 0x%llx\n" |
| "\tLast exit timestamp msec: 0x%llx\n" |
| "\nError transition header --> payload state machine: 0x%llx\n" |
| "Error transition from an Active state when not in Idle state: 0x%llx\n" |
| "Error transition from Idle state to Idle state: 0x%llx\n" |
| "Warning transition from Active Reader/Writer state to Idle state: " |
| "0x%llx\n" |
| "Error transition from Active state to Active state: 0x%llx\n" |
| "Error transition from Idle state to Active state with notification: " |
| "0x%llx\n" |
| "Error transition from Active Reader/Writer state to Active " |
| "Reader/Writer state: 0x%llx\n" |
| "Error transition from Idle state to Active Reader/Writer state with " |
| "notification: 0x%llx\n" |
| "\nTotal uptime: 0x%llx Cumulative modes time: 0x%llx\n", |
| data->c_pw_states[ST21NFC_IDLE].count, idle_duration, |
| data->c_pw_states[ST21NFC_IDLE].last_entry, |
| data->c_pw_states[ST21NFC_IDLE].last_exit, |
| data->c_pw_states[ST21NFC_ACTIVE].count, active_ce_duration, |
| data->c_pw_states[ST21NFC_ACTIVE].last_entry, |
| data->c_pw_states[ST21NFC_ACTIVE].last_exit, |
| data->c_pw_states[ST21NFC_ACTIVE_RW].count, active_rw_duration, |
| data->c_pw_states[ST21NFC_ACTIVE_RW].last_entry, |
| data->c_pw_states[ST21NFC_ACTIVE_RW].last_exit, |
| data->c_pw_states_err.header_payload, |
| data->c_pw_states_err.active_not_idle, data->c_pw_states_err.idle_to_idle, |
| data->c_pw_states_err.active_rw_to_idle, |
| data->c_pw_states_err.active_to_active, |
| data->c_pw_states_err.idle_to_active_ntf, |
| data->c_pw_states_err.act_rw_to_act_rw, |
| data->c_pw_states_err.idle_to_active_rw_ntf, current_time_ms, |
| idle_duration + active_ce_duration + active_rw_duration); |
| } |
| |
| static DEVICE_ATTR_RW(i2c_addr); |
| |
| static DEVICE_ATTR_RO(version); |
| |
| static DEVICE_ATTR_RO(power_stats); |
| |
| static struct attribute *st21nfc_attrs[] = { |
| &dev_attr_i2c_addr.attr, |
| &dev_attr_version.attr, |
| &dev_attr_power_stats.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group st21nfc_attr_grp = { |
| .attrs = st21nfc_attrs, |
| }; |
| |
| #ifndef ST21NFCD_MTK |
| static const struct acpi_gpio_params irq_gpios = {0, 0, false}; |
| static const struct acpi_gpio_params reset_gpios = {1, 0, false}; |
| static const struct acpi_gpio_params pidle_gpios = {2, 0, false}; |
| static const struct acpi_gpio_params clkreq_gpios = {3, 0, false}; |
| |
| static const struct acpi_gpio_mapping acpi_st21nfc_gpios[] = { |
| {"irq-gpios", &irq_gpios, 1}, |
| {"reset-gpios", &reset_gpios, 1}, |
| {"pidle-gpios", &pidle_gpios, 1}, |
| {"clkreq-gpios", &clkreq_gpios, 1}, |
| }; |
| #endif |
| |
| #ifdef ST21NFCD_MTK |
| static int st21nfc_parse_dt(struct device *dev, |
| struct st21nfc_i2c_platform_data *data) { |
| struct device_node *np = dev->of_node; |
| int errorno = 0; |
| |
| data->irq_gpio = of_get_named_gpio(np, "gpio-irq-std", 0); |
| if ((!gpio_is_valid(data->irq_gpio))) { |
| pr_err("%s: get NFC IRQ GPIO failed", __func__); |
| return -EINVAL; |
| } |
| |
| data->rst_gpio = of_get_named_gpio(np, "gpio-rst-std", 0); |
| if ((!gpio_is_valid(data->rst_gpio))) { |
| pr_err("%s: get NFC RST GPIO failed", __func__); |
| return -EINVAL; |
| } |
| |
| data->pidle_gpio = of_get_named_gpio(np, "gpio-pidle-std", 0); |
| if ((!gpio_is_valid(data->pidle_gpio))) { |
| pr_err("%s: get NFC pidle GPIO failed, skip pidle", __func__); |
| //return -EINVAL; |
| } |
| |
| data->clkreq_gpio = of_get_named_gpio(np, "gpio-clkreq-std", 0); |
| if ((!gpio_is_valid(data->clkreq_gpio))) { |
| pr_err("%s: get NFC CLKREQ GPIO failed", __func__); |
| return -EINVAL; |
| } |
| |
| pr_info("%s: %d, %d, %d, %d, %d error:%d\n", __func__, |
| data->irq_gpio, data->rst_gpio, data->pidle_gpio, |
| data->clkreq_gpio, errorno); |
| return errorno; |
| } |
| #endif // ST21NFCD_MTK |
| |
| static int st21nfc_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) { |
| pr_info("%s : st21nfc_probe start\n", __func__); |
| |
| int ret; |
| struct st21nfc_device *st21nfc_dev; |
| struct device *dev = &client->dev; |
| #ifdef ST21NFCD_MTK |
| struct device_node *np = dev->of_node; |
| struct st21nfc_i2c_platform_data *platform_data; |
| #endif // ST21NFCD_MTK |
| //#ifdef VENDOR_EDIT |
| //Zhou.Zheng@CN.NFC.Basic.Hardware,2674926, 2019/12/16, |
| //Add for : ST NXP chip common software |
| CHECK_NFC_CHIP(ST21H); |
| //#endif /* VENDOR_EDIT */ |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| pr_err("%s : need I2C_FUNC_I2C\n", __func__); |
| return -ENODEV; |
| } |
| |
| st21nfc_dev = devm_kzalloc(dev, sizeof(*st21nfc_dev), GFP_KERNEL); |
| if (st21nfc_dev == NULL) return -ENOMEM; |
| |
| #ifdef KRNMTKLEGACY_I2C |
| #ifdef CONFIG_64BIT |
| I2CDMAWriteBuf = |
| (char *)dma_alloc_coherent(&client->dev, MAX_BUFFER_SIZE, |
| (dma_addr_t *)&I2CDMAWriteBuf_pa, GFP_KERNEL); |
| #else |
| I2CDMAWriteBuf = (char *)dma_alloc_coherent( |
| NULL, MAX_BUFFER_SIZE, (dma_addr_t *)&I2CDMAWriteBuf_pa, GFP_KERNEL); |
| #endif |
| |
| if (I2CDMAWriteBuf == NULL) |
| pr_err("%s : failed to allocate dma buffer\n", __func__); |
| #ifdef CONFIG_64BIT |
| I2CDMAReadBuf = |
| (char *)dma_alloc_coherent(&client->dev, MAX_BUFFER_SIZE, |
| (dma_addr_t *)&I2CDMAReadBuf_pa, GFP_KERNEL); |
| #else |
| I2CDMAReadBuf = (char *)dma_alloc_coherent( |
| NULL, MAX_BUFFER_SIZE, (dma_addr_t *)&I2CDMAReadBuf_pa, GFP_KERNEL); |
| #endif |
| |
| if (I2CDMAReadBuf == NULL) |
| pr_err("%s : failed to allocate dma buffer\n", __func__); |
| pr_debug("%s :I2CDMAWriteBuf_pa %d, I2CDMAReadBuf_pa,%d\n", __func__, |
| I2CDMAWriteBuf_pa, I2CDMAReadBuf_pa); |
| #endif /* KRNMTKLEGACY_I2C */ |
| |
| /* store for later use */ |
| st21nfc_dev->client = client; |
| st21nfc_dev->r_state_current = ST21NFC_HEADER; |
| client->adapter->retries = 0; |
| |
| #ifndef ST21NFCD_MTK |
| ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), acpi_st21nfc_gpios); |
| if (ret) pr_debug("Unable to add GPIO mapping table\n"); |
| #else // ST21NFCD_MTK |
| // np = of_find_compatible_node(NULL, NULL, "mediatek,nfc-gpio-v2"); |
| //np = of_find_compatible_node(NULL, NULL, "mediatek,nfc"); |
| if (!np) { |
| pr_err("%s : cannot find st,st21nfc node in DTS.\n", __func__); |
| return -ENODEV; |
| } else { |
| platform_data = devm_kzalloc(&client->dev, |
| sizeof(struct st21nfc_i2c_platform_data), GFP_KERNEL); |
| if (!platform_data) { |
| dev_err(&client->dev, |
| "st21nfc-nci probe: Failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| ret = st21nfc_parse_dt(&client->dev, platform_data); |
| if (ret) |
| { |
| pr_info("%s st21nfc_parse_dt failed", __func__); |
| } |
| } |
| #endif // ST21NFCD_MTK |
| |
| #ifndef ST21NFCD_MTK |
| st21nfc_dev->gpiod_irq = devm_gpiod_get(dev, "irq", GPIOD_IN); |
| #else // ST21NFCD_MTK |
| st21nfc_dev->gpiod_irq = gpio_to_desc(platform_data->irq_gpio); |
| ret = gpio_request(platform_data->irq_gpio, |
| #if (!defined(CONFIG_MTK_GPIO) || defined(CONFIG_MTK_GPIOLIB_STAND)) |
| "gpio-irq-std" |
| #else |
| "gpio-irq" |
| #endif |
| ); |
| if (ret) { |
| pr_err("%s : gpio_request failed\n", __FILE__); |
| return -ENODEV; |
| } |
| pr_info("%s : IRQ GPIO = %d\n", __func__, platform_data->irq_gpio); |
| ret = gpio_direction_input(platform_data->irq_gpio); |
| if (ret) { |
| pr_err("%s : gpio_direction_input failed\n", __FILE__); |
| return -ENODEV; |
| } |
| #endif // ST21NFCD_MTK |
| if (IS_ERR_OR_NULL(st21nfc_dev->gpiod_irq)) { |
| pr_err("%s : Unable to request irq-gpios\n", __func__); |
| return -ENODEV; |
| } |
| |
| #ifndef ST21NFCD_MTK |
| st21nfc_dev->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); |
| #else // ST21NFCD_MTK |
| st21nfc_dev->gpiod_reset = gpio_to_desc(platform_data->rst_gpio); |
| ret = gpio_request(platform_data->rst_gpio, |
| #if (!defined(CONFIG_MTK_GPIO) || defined(CONFIG_MTK_GPIOLIB_STAND)) |
| "gpio-rst-std" |
| #else |
| "gpio-rst" |
| #endif |
| ); |
| if (ret) { |
| pr_err("%s : gpio_request failed\n", __FILE__); |
| return -ENODEV; |
| } |
| pr_info("%s : RST GPIO = %d\n", __func__, platform_data->rst_gpio); |
| ret = gpio_direction_output(platform_data->rst_gpio, 1); |
| if (ret) { |
| pr_err("%s : gpio_direction_output failed\n", __FILE__); |
| return -ENODEV; |
| } |
| gpio_set_value(platform_data->rst_gpio, 1); |
| #endif // ST21NFCD_MTK |
| if (IS_ERR_OR_NULL(st21nfc_dev->gpiod_reset)) { |
| pr_warn("%s : Unable to request reset-gpios\n", __func__); |
| return -ENODEV; |
| } |
| |
| #ifndef ST21NFCD_MTK |
| st21nfc_dev->gpiod_pidle = devm_gpiod_get(dev, "pidle", GPIOD_IN); |
| #else // ST21NFCD_MTK |
| st21nfc_dev->gpiod_pidle = gpio_to_desc(platform_data->pidle_gpio); |
| #endif // ST21NFCD_MTK |
| if (IS_ERR_OR_NULL(st21nfc_dev->gpiod_pidle)) { |
| pr_warn("[OPTIONAL] %s: Unable to request pidle-gpio\n", __func__); |
| ret = 0; |
| } else { |
| /* Start the power stat in power mode idle */ |
| st21nfc_dev->irq_pw_stats_idle = gpiod_to_irq(st21nfc_dev->gpiod_pidle); |
| |
| ret = irq_set_irq_type(st21nfc_dev->irq_pw_stats_idle, IRQ_TYPE_EDGE_BOTH); |
| if (ret) { |
| pr_err("%s : set_irq_type failed\n", __func__); |
| return ret; |
| } |
| |
| /* This next call requests an interrupt line */ |
| ret = devm_request_irq(dev, st21nfc_dev->irq_pw_stats_idle, |
| (irq_handler_t)st21nfc_dev_power_stats_handler, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| /* Interrupt on both edges */ |
| "st21nfc_pw_stats_idle_handle", st21nfc_dev); |
| if (ret) { |
| pr_err("%s : devm_request_irq for power stats idle failed\n", __func__); |
| return ret; |
| } |
| |
| ret = sysfs_create_file(&dev->kobj, &dev_attr_power_stats.attr); |
| if (ret) { |
| pr_err("%s : sysfs_create_file for power stats failed\n", __func__); |
| return ret; |
| } |
| mutex_init(&st21nfc_dev->pidle_mutex); |
| |
| st21nfc_dev->st_p_wq = create_workqueue("st_pstate_work"); |
| INIT_WORK(&(st21nfc_dev->st_p_work), st21nfc_pstate_wq); |
| } |
| |
| #ifndef ST21NFCD_MTK |
| st21nfc_dev->gpiod_clkreq = devm_gpiod_get(dev, "clkreq", GPIOD_IN); |
| if (IS_ERR(st21nfc_dev->gpiod_clkreq)) { |
| pr_warn("[OPTIONAL] %s : Unable to request clkreq-gpios\n", __func__); |
| ret = 0; |
| } else { |
| if (!device_property_read_bool(dev, "st,clk_pinctrl")) { |
| pr_debug("[dsc]%s:[OPTIONAL] clk_pinctrl not set\n", __func__); |
| st21nfc_dev->pinctrl_en = 0; |
| } else { |
| pr_debug("[dsc]%s:[OPTIONAL] clk_pinctrl set\n", __func__); |
| st21nfc_dev->pinctrl_en = 1; |
| } |
| |
| /* Set clk_run when clock pinctrl already enabled */ |
| if (st21nfc_dev->pinctrl_en != 0) st21nfc_dev->clk_run = true; |
| |
| ret = st21nfc_clock_select(st21nfc_dev); |
| if (ret < 0) { |
| pr_err("%s : st21nfc_clock_select failed\n", __func__); |
| goto err_sysfs_power_stats; |
| } |
| } |
| #else // ST21NFCD_MTK |
| ret = st21nfc_clock_select(st21nfc_dev); |
| if (ret < 0) { |
| pr_err("%s : st21nfc_clock_select failed\n", __func__); |
| goto err_sysfs_power_stats; |
| } |
| #endif // ST21NFCD_MTK |
| |
| #ifdef ST21NFCD_MTK |
| client->irq = gpiod_to_irq(st21nfc_dev->gpiod_irq); |
| #else // ST21NFCD_MTK |
| np = of_find_compatible_node(NULL, NULL, "mediatek,irq_nfc-eint"); |
| if (np) { |
| client->irq = irq_of_parse_and_map(np, 0); |
| pr_info("%s : MT IRQ GPIO = %d\n", __func__, client->irq); |
| } |
| #endif // ST21NFCD_MTK |
| |
| /* init mutex and queues */ |
| init_waitqueue_head(&st21nfc_dev->read_wq); |
| mutex_init(&st21nfc_dev->read_mutex); |
| spin_lock_init(&st21nfc_dev->irq_enabled_lock); |
| pr_debug( |
| "%s : debug irq_gpio = %d, client-irq = %d, pidle_gpio = %d\n", __func__, |
| st21nfc_dev->gpiod_irq ? desc_to_gpio(st21nfc_dev->gpiod_irq) : -1, |
| client->irq, |
| st21nfc_dev->gpiod_pidle ? desc_to_gpio(st21nfc_dev->gpiod_pidle) : -1); |
| st21nfc_dev->st21nfc_device.minor = MISC_DYNAMIC_MINOR; |
| st21nfc_dev->st21nfc_device.name = "st21nfc"; |
| st21nfc_dev->st21nfc_device.fops = &st21nfc_dev_fops; |
| st21nfc_dev->st21nfc_device.parent = dev; |
| |
| i2c_set_clientdata(client, st21nfc_dev); |
| ret = misc_register(&st21nfc_dev->st21nfc_device); |
| if (ret) { |
| pr_err("%s : misc_register failed\n", __func__); |
| goto err_misc_register; |
| } |
| |
| ret = sysfs_create_group(&dev->kobj, &st21nfc_attr_grp); |
| if (ret) { |
| pr_err("%s : sysfs_create_group failed\n", __func__); |
| goto err_sysfs_create_group_failed; |
| } |
| device_init_wakeup(&client->dev, true); |
| device_set_wakeup_capable(&client->dev, true); |
| st21nfc_dev->irq_wake_up = false; |
| |
| return 0; |
| |
| err_sysfs_create_group_failed: |
| misc_deregister(&st21nfc_dev->st21nfc_device); |
| err_misc_register: |
| mutex_destroy(&st21nfc_dev->read_mutex); |
| err_sysfs_power_stats: |
| if (!IS_ERR(st21nfc_dev->gpiod_pidle)) { |
| sysfs_remove_file(&client->dev.kobj, &dev_attr_power_stats.attr); |
| mutex_destroy(&st21nfc_dev->pidle_mutex); |
| } |
| return ret; |
| } |
| |
| static int st21nfc_remove(struct i2c_client *client) { |
| struct st21nfc_device *st21nfc_dev = i2c_get_clientdata(client); |
| |
| #ifdef KRNMTKLEGACY_I2C |
| if (I2CDMAWriteBuf) { |
| #ifdef CONFIG_64BIT |
| dma_free_coherent(&client->dev, MAX_BUFFER_SIZE, I2CDMAWriteBuf, |
| I2CDMAWriteBuf_pa); |
| #else |
| dma_free_coherent(NULL, MAX_BUFFER_SIZE, I2CDMAWriteBuf, I2CDMAWriteBuf_pa); |
| #endif |
| I2CDMAWriteBuf = NULL; |
| I2CDMAWriteBuf_pa = 0; |
| } |
| |
| if (I2CDMAReadBuf) { |
| #ifdef CONFIG_64BIT |
| dma_free_coherent(&client->dev, MAX_BUFFER_SIZE, I2CDMAReadBuf, |
| I2CDMAReadBuf_pa); |
| #else |
| dma_free_coherent(NULL, MAX_BUFFER_SIZE, I2CDMAReadBuf, I2CDMAReadBuf_pa); |
| #endif |
| I2CDMAReadBuf = NULL; |
| I2CDMAReadBuf_pa = 0; |
| } |
| #endif /* KRNMTKLEGACY_I2C */ |
| |
| st21nfc_clock_deselect(st21nfc_dev); |
| misc_deregister(&st21nfc_dev->st21nfc_device); |
| if (!IS_ERR(st21nfc_dev->gpiod_pidle)) { |
| sysfs_remove_file(&client->dev.kobj, &dev_attr_power_stats.attr); |
| mutex_destroy(&st21nfc_dev->pidle_mutex); |
| } |
| sysfs_remove_group(&client->dev.kobj, &st21nfc_attr_grp); |
| mutex_destroy(&st21nfc_dev->read_mutex); |
| acpi_dev_remove_driver_gpios(ACPI_COMPANION(&client->dev)); |
| |
| return 0; |
| } |
| |
| static int st21nfc_suspend(struct device *device) { |
| struct i2c_client *client = to_i2c_client(device); |
| struct st21nfc_device *st21nfc_dev = i2c_get_clientdata(client); |
| |
| if (device_may_wakeup(&client->dev) && st21nfc_dev->irq_enabled) { |
| if (!enable_irq_wake(client->irq)) st21nfc_dev->irq_wake_up = true; |
| } |
| |
| if (!IS_ERR(st21nfc_dev->gpiod_pidle)) { |
| st21nfc_dev->p_idle_last = gpiod_get_value(st21nfc_dev->gpiod_pidle); |
| } |
| |
| return 0; |
| } |
| |
| static int st21nfc_resume(struct device *device) { |
| struct i2c_client *client = to_i2c_client(device); |
| struct st21nfc_device *st21nfc_dev = i2c_get_clientdata(client); |
| int pidle; |
| |
| if (device_may_wakeup(&client->dev) && st21nfc_dev->irq_wake_up) { |
| if (!disable_irq_wake(client->irq)) st21nfc_dev->irq_wake_up = false; |
| } |
| |
| if (!IS_ERR(st21nfc_dev->gpiod_pidle)) { |
| pidle = gpiod_get_value(st21nfc_dev->gpiod_pidle); |
| if ((st21nfc_dev->p_idle_last != pidle) || |
| (st21nfc_dev->pw_current == ST21NFC_IDLE && pidle != 0) || |
| (st21nfc_dev->pw_current == ST21NFC_ACTIVE && pidle == 0)) { |
| queue_work(st21nfc_dev->st_p_wq, &(st21nfc_dev->st_p_work)); |
| } |
| } |
| return 0; |
| } |
| |
| static const struct i2c_device_id st21nfc_id[] = {{"st21nfc", 0}, {}}; |
| |
| static const struct of_device_id st21nfc_of_match[] = { |
| #ifndef ST21NFCD_MTK |
| { |
| .compatible = "st,st21nfc", |
| }, |
| #else |
| {.compatible = "mediatek,nfc"}, |
| #endif |
| {}}; |
| MODULE_DEVICE_TABLE(of, st21nfc_of_match); |
| |
| static const struct dev_pm_ops st21nfc_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(st21nfc_suspend, st21nfc_resume)}; |
| |
| #ifndef ST21NFCD_MTK |
| static const struct acpi_device_id st21nfc_acpi_match[] = {{"SMO2104"}, {}}; |
| MODULE_DEVICE_TABLE(acpi, st21nfc_acpi_match); |
| #endif |
| |
| static struct i2c_driver st21nfc_driver = { |
| .id_table = st21nfc_id, |
| .probe = st21nfc_probe, |
| .remove = st21nfc_remove, |
| .driver = |
| { |
| .owner = THIS_MODULE, |
| .name = I2C_ID_NAME, |
| .of_match_table = st21nfc_of_match, |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .pm = &st21nfc_pm_ops, |
| #ifndef ST21NFCD_MTK |
| .acpi_match_table = ACPI_PTR(st21nfc_acpi_match), |
| #endif |
| }, |
| }; |
| |
| #ifdef ST21NFCD_MTK |
| #ifndef KRNMTKLEGACY_GPIO |
| /* platform driver */ |
| static const struct of_device_id nfc_dev_of_match[] = { |
| { |
| .compatible = "mediatek,nfc-gpio-v2", |
| }, |
| {}, |
| }; |
| |
| static struct platform_driver st21nfc_platform_driver = { |
| .probe = st21nfc_platform_probe, |
| .remove = st21nfc_platform_remove, |
| .driver = |
| { |
| .name = I2C_ID_NAME, |
| .owner = THIS_MODULE, |
| .of_match_table = nfc_dev_of_match, |
| }, |
| }; |
| #endif /* KRNMTKLEGACY_GPIO */ |
| #endif /* ST21NFCD_MTK */ |
| |
| /* module load/unload record keeping */ |
| static int __init st21nfc_dev_init(void) { |
| pr_info("Loading st21nfc driver\n"); |
| #ifdef ST21NFCD_MTK |
| #ifndef KRNMTKLEGACY_GPIO |
| platform_driver_register(&st21nfc_platform_driver); |
| if (enable_debug_log) pr_debug("Loading st21nfc i2c driver\n"); |
| #endif |
| #endif |
| return i2c_add_driver(&st21nfc_driver); |
| } |
| |
| module_init(st21nfc_dev_init); |
| |
| static void __exit st21nfc_dev_exit(void) { |
| pr_info("Unloading st21nfc driver\n"); |
| i2c_del_driver(&st21nfc_driver); |
| } |
| |
| module_exit(st21nfc_dev_exit); |
| |
| MODULE_AUTHOR("STMicroelectronics"); |
| MODULE_DESCRIPTION("NFC ST21NFC driver"); |
| MODULE_VERSION(DRIVER_VERSION); |
| MODULE_LICENSE("GPL"); |