| /* Linux driver for devices based on the DiBcom DiB0700 USB bridge |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation, version 2. |
| * |
| * Copyright (C) 2005-9 DiBcom, SA et al |
| */ |
| #include "dib0700.h" |
| |
| #include "dib3000mc.h" |
| #include "dib7000m.h" |
| #include "dib7000p.h" |
| #include "dib8000.h" |
| #include "mt2060.h" |
| #include "mt2266.h" |
| #include "tuner-xc2028.h" |
| #include "xc5000.h" |
| #include "s5h1411.h" |
| #include "dib0070.h" |
| #include "dib0090.h" |
| #include "lgdt3305.h" |
| #include "mxl5007t.h" |
| |
| static int force_lna_activation; |
| module_param(force_lna_activation, int, 0644); |
| MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), " |
| "if applicable for the device (default: 0=automatic/off)."); |
| |
| struct dib0700_adapter_state { |
| int (*set_param_save) (struct dvb_frontend *, struct dvb_frontend_parameters *); |
| }; |
| |
| /* Hauppauge Nova-T 500 (aka Bristol) |
| * has a LNA on GPIO0 which is enabled by setting 1 */ |
| static struct mt2060_config bristol_mt2060_config[2] = { |
| { |
| .i2c_address = 0x60, |
| .clock_out = 3, |
| }, { |
| .i2c_address = 0x61, |
| } |
| }; |
| |
| |
| static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = { |
| .band_caps = BAND_VHF | BAND_UHF, |
| .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0), |
| |
| .agc1_max = 42598, |
| .agc1_min = 17694, |
| .agc2_max = 45875, |
| .agc2_min = 0, |
| |
| .agc1_pt1 = 0, |
| .agc1_pt2 = 59, |
| |
| .agc1_slope1 = 0, |
| .agc1_slope2 = 69, |
| |
| .agc2_pt1 = 0, |
| .agc2_pt2 = 59, |
| |
| .agc2_slope1 = 111, |
| .agc2_slope2 = 28, |
| }; |
| |
| static struct dib3000mc_config bristol_dib3000mc_config[2] = { |
| { .agc = &bristol_dib3000p_mt2060_agc_config, |
| .max_time = 0x196, |
| .ln_adc_level = 0x1cc7, |
| .output_mpeg2_in_188_bytes = 1, |
| }, |
| { .agc = &bristol_dib3000p_mt2060_agc_config, |
| .max_time = 0x196, |
| .ln_adc_level = 0x1cc7, |
| .output_mpeg2_in_188_bytes = 1, |
| } |
| }; |
| |
| static int bristol_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_state *st = adap->dev->priv; |
| if (adap->id == 0) { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); |
| |
| if (force_lna_activation) |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| else |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); |
| |
| if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); |
| return -ENODEV; |
| } |
| } |
| st->mt2060_if1[adap->id] = 1220; |
| return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, |
| (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0; |
| } |
| |
| static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval) |
| { |
| struct i2c_msg msg[2] = { |
| { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 }, |
| { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 }, |
| }; |
| if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO; |
| return 0; |
| } |
| |
| static int bristol_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; |
| struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1); |
| s8 a; |
| int if1=1220; |
| if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && |
| adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { |
| if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; |
| } |
| return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id], |
| if1) == NULL ? -ENODEV : 0; |
| } |
| |
| /* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */ |
| |
| /* MT226x */ |
| static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = { |
| { |
| BAND_UHF, |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) |
| | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), |
| |
| 1130, |
| 21, |
| |
| 0, |
| 118, |
| |
| 0, |
| 3530, |
| 1, |
| 0, |
| |
| 65535, |
| 33770, |
| 65535, |
| 23592, |
| |
| 0, |
| 62, |
| 255, |
| 64, |
| 64, |
| 132, |
| 192, |
| 80, |
| 80, |
| |
| 17, |
| 27, |
| 23, |
| 51, |
| |
| 1, |
| }, { |
| BAND_VHF | BAND_LBAND, |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) |
| | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), |
| |
| 2372, |
| 21, |
| |
| 0, |
| 118, |
| |
| 0, |
| 3530, |
| 1, |
| 0, |
| |
| 65535, |
| 0, |
| 65535, |
| 23592, |
| |
| 0, |
| 128, |
| 128, |
| 128, |
| 0, |
| 128, |
| 253, |
| 81, |
| 0, |
| |
| 17, |
| 27, |
| 23, |
| 51, |
| |
| 1, |
| } |
| }; |
| |
| static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = { |
| 60000, 30000, |
| 1, 8, 3, 1, 0, |
| 0, 0, 1, 1, 2, |
| (3 << 14) | (1 << 12) | (524 << 0), |
| 0, |
| 20452225, |
| }; |
| |
| static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = { |
| { .output_mpeg2_in_188_bytes = 1, |
| .hostbus_diversity = 1, |
| .tuner_is_baseband = 1, |
| |
| .agc_config_count = 2, |
| .agc = stk7700d_7000p_mt2266_agc_config, |
| .bw = &stk7700d_mt2266_pll_config, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| }, |
| { .output_mpeg2_in_188_bytes = 1, |
| .hostbus_diversity = 1, |
| .tuner_is_baseband = 1, |
| |
| .agc_config_count = 2, |
| .agc = stk7700d_7000p_mt2266_agc_config, |
| .bw = &stk7700d_mt2266_pll_config, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| } |
| }; |
| |
| static struct mt2266_config stk7700d_mt2266_config[2] = { |
| { .i2c_address = 0x60 |
| }, |
| { .i2c_address = 0x60 |
| } |
| }; |
| |
| static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| if (adap->id == 0) { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(10); |
| if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, |
| stk7700d_dib7000p_mt2266_config) |
| != 0) { |
| err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); |
| return -ENODEV; |
| } |
| } |
| |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1), |
| &stk7700d_dib7000p_mt2266_config[adap->id]); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| if (adap->id == 0) { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, |
| stk7700d_dib7000p_mt2266_config) |
| != 0) { |
| err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); |
| return -ENODEV; |
| } |
| } |
| |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1), |
| &stk7700d_dib7000p_mt2266_config[adap->id]); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct i2c_adapter *tun_i2c; |
| tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); |
| return dvb_attach(mt2266_attach, adap->fe, tun_i2c, |
| &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0; |
| } |
| |
| /* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */ |
| static struct dibx000_agc_config xc3028_agc_config = { |
| BAND_VHF | BAND_UHF, /* band_caps */ |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, |
| * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, |
| * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | |
| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ |
| |
| 712, /* inv_gain */ |
| 21, /* time_stabiliz */ |
| |
| 0, /* alpha_level */ |
| 118, /* thlock */ |
| |
| 0, /* wbd_inv */ |
| 2867, /* wbd_ref */ |
| 0, /* wbd_sel */ |
| 2, /* wbd_alpha */ |
| |
| 0, /* agc1_max */ |
| 0, /* agc1_min */ |
| 39718, /* agc2_max */ |
| 9930, /* agc2_min */ |
| 0, /* agc1_pt1 */ |
| 0, /* agc1_pt2 */ |
| 0, /* agc1_pt3 */ |
| 0, /* agc1_slope1 */ |
| 0, /* agc1_slope2 */ |
| 0, /* agc2_pt1 */ |
| 128, /* agc2_pt2 */ |
| 29, /* agc2_slope1 */ |
| 29, /* agc2_slope2 */ |
| |
| 17, /* alpha_mant */ |
| 27, /* alpha_exp */ |
| 23, /* beta_mant */ |
| 51, /* beta_exp */ |
| |
| 1, /* perform_agc_softsplit */ |
| }; |
| |
| /* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */ |
| static struct dibx000_bandwidth_config xc3028_bw_config = { |
| 60000, 30000, /* internal, sampling */ |
| 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */ |
| 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, |
| modulo */ |
| (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ |
| (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ |
| 20452225, /* timf */ |
| 30000000, /* xtal_hz */ |
| }; |
| |
| static struct dib7000p_config stk7700ph_dib7700_xc3028_config = { |
| .output_mpeg2_in_188_bytes = 1, |
| .tuner_is_baseband = 1, |
| |
| .agc_config_count = 1, |
| .agc = &xc3028_agc_config, |
| .bw = &xc3028_bw_config, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| }; |
| |
| static int stk7700ph_xc3028_callback(void *ptr, int component, |
| int command, int arg) |
| { |
| struct dvb_usb_adapter *adap = ptr; |
| |
| switch (command) { |
| case XC2028_TUNER_RESET: |
| /* Send the tuner in then out of reset */ |
| dib7000p_set_gpio(adap->fe, 8, 0, 0); msleep(10); |
| dib7000p_set_gpio(adap->fe, 8, 0, 1); |
| break; |
| case XC2028_RESET_CLK: |
| break; |
| default: |
| err("%s: unknown command %d, arg %d\n", __func__, |
| command, arg); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static struct xc2028_ctrl stk7700ph_xc3028_ctrl = { |
| .fname = XC2028_DEFAULT_FIRMWARE, |
| .max_len = 64, |
| .demod = XC3028_FE_DIBCOM52, |
| }; |
| |
| static struct xc2028_config stk7700ph_xc3028_config = { |
| .i2c_addr = 0x61, |
| .ctrl = &stk7700ph_xc3028_ctrl, |
| }; |
| |
| static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; |
| |
| if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && |
| desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); |
| else |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(20); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(20); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| msleep(10); |
| |
| if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, |
| &stk7700ph_dib7700_xc3028_config) != 0) { |
| err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", |
| __func__); |
| return -ENODEV; |
| } |
| |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, |
| &stk7700ph_dib7700_xc3028_config); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct i2c_adapter *tun_i2c; |
| |
| tun_i2c = dib7000p_get_i2c_master(adap->fe, |
| DIBX000_I2C_INTERFACE_TUNER, 1); |
| |
| stk7700ph_xc3028_config.i2c_adap = tun_i2c; |
| |
| /* FIXME: generalize & move to common area */ |
| adap->fe->callback = stk7700ph_xc3028_callback; |
| |
| return dvb_attach(xc2028_attach, adap->fe, &stk7700ph_xc3028_config) |
| == NULL ? -ENODEV : 0; |
| } |
| |
| #define DEFAULT_RC_INTERVAL 50 |
| |
| static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; |
| |
| /* Number of keypresses to ignore before start repeating */ |
| #define RC_REPEAT_DELAY 6 |
| |
| static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) |
| { |
| u8 key[4]; |
| int i; |
| struct dvb_usb_rc_key *keymap = d->props.rc_key_map; |
| struct dib0700_state *st = d->priv; |
| |
| *event = 0; |
| *state = REMOTE_NO_KEY_PRESSED; |
| |
| if (st->fw_version >= 0x10200) { |
| /* For 1.20 firmware , We need to keep the RC polling |
| callback so we can reuse the input device setup in |
| dvb-usb-remote.c. However, the actual work is being done |
| in the bulk URB completion handler. */ |
| return 0; |
| } |
| |
| i=dib0700_ctrl_rd(d,rc_request,2,key,4); |
| if (i<=0) { |
| err("RC Query Failed"); |
| return -1; |
| } |
| |
| /* losing half of KEY_0 events from Philipps rc5 remotes.. */ |
| if (key[0]==0 && key[1]==0 && key[2]==0 && key[3]==0) return 0; |
| |
| /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */ |
| |
| dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */ |
| |
| switch (dvb_usb_dib0700_ir_proto) { |
| case 0: { |
| /* NEC protocol sends repeat code as 0 0 0 FF */ |
| if ((key[3-2] == 0x00) && (key[3-3] == 0x00) && |
| (key[3] == 0xFF)) { |
| st->rc_counter++; |
| if (st->rc_counter > RC_REPEAT_DELAY) { |
| *event = d->last_event; |
| *state = REMOTE_KEY_PRESSED; |
| st->rc_counter = RC_REPEAT_DELAY; |
| } |
| return 0; |
| } |
| for (i=0;i<d->props.rc_key_map_size; i++) { |
| if (rc5_custom(&keymap[i]) == key[3-2] && |
| rc5_data(&keymap[i]) == key[3-3]) { |
| st->rc_counter = 0; |
| *event = keymap[i].event; |
| *state = REMOTE_KEY_PRESSED; |
| d->last_event = keymap[i].event; |
| return 0; |
| } |
| } |
| break; |
| } |
| default: { |
| /* RC-5 protocol changes toggle bit on new keypress */ |
| for (i = 0; i < d->props.rc_key_map_size; i++) { |
| if (rc5_custom(&keymap[i]) == key[3-2] && |
| rc5_data(&keymap[i]) == key[3-3]) { |
| if (d->last_event == keymap[i].event && |
| key[3-1] == st->rc_toggle) { |
| st->rc_counter++; |
| /* prevents unwanted double hits */ |
| if (st->rc_counter > RC_REPEAT_DELAY) { |
| *event = d->last_event; |
| *state = REMOTE_KEY_PRESSED; |
| st->rc_counter = RC_REPEAT_DELAY; |
| } |
| |
| return 0; |
| } |
| st->rc_counter = 0; |
| *event = keymap[i].event; |
| *state = REMOTE_KEY_PRESSED; |
| st->rc_toggle = key[3-1]; |
| d->last_event = keymap[i].event; |
| return 0; |
| } |
| } |
| break; |
| } |
| } |
| err("Unknown remote controller key: %2X %2X %2X %2X", (int) key[3-2], (int) key[3-3], (int) key[3-1], (int) key[3]); |
| d->last_event = 0; |
| return 0; |
| } |
| |
| static struct dvb_usb_rc_key dib0700_rc_keys[] = { |
| /* Key codes for the tiny Pinnacle remote*/ |
| { 0x0700, KEY_MUTE }, |
| { 0x0701, KEY_MENU }, /* Pinnacle logo */ |
| { 0x0739, KEY_POWER }, |
| { 0x0703, KEY_VOLUMEUP }, |
| { 0x0709, KEY_VOLUMEDOWN }, |
| { 0x0706, KEY_CHANNELUP }, |
| { 0x070c, KEY_CHANNELDOWN }, |
| { 0x070f, KEY_1 }, |
| { 0x0715, KEY_2 }, |
| { 0x0710, KEY_3 }, |
| { 0x0718, KEY_4 }, |
| { 0x071b, KEY_5 }, |
| { 0x071e, KEY_6 }, |
| { 0x0711, KEY_7 }, |
| { 0x0721, KEY_8 }, |
| { 0x0712, KEY_9 }, |
| { 0x0727, KEY_0 }, |
| { 0x0724, KEY_SCREEN }, /* 'Square' key */ |
| { 0x072a, KEY_TEXT }, /* 'T' key */ |
| { 0x072d, KEY_REWIND }, |
| { 0x0730, KEY_PLAY }, |
| { 0x0733, KEY_FASTFORWARD }, |
| { 0x0736, KEY_RECORD }, |
| { 0x073c, KEY_STOP }, |
| { 0x073f, KEY_CANCEL }, /* '?' key */ |
| /* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */ |
| { 0xeb01, KEY_POWER }, |
| { 0xeb02, KEY_1 }, |
| { 0xeb03, KEY_2 }, |
| { 0xeb04, KEY_3 }, |
| { 0xeb05, KEY_4 }, |
| { 0xeb06, KEY_5 }, |
| { 0xeb07, KEY_6 }, |
| { 0xeb08, KEY_7 }, |
| { 0xeb09, KEY_8 }, |
| { 0xeb0a, KEY_9 }, |
| { 0xeb0b, KEY_VIDEO }, |
| { 0xeb0c, KEY_0 }, |
| { 0xeb0d, KEY_REFRESH }, |
| { 0xeb0f, KEY_EPG }, |
| { 0xeb10, KEY_UP }, |
| { 0xeb11, KEY_LEFT }, |
| { 0xeb12, KEY_OK }, |
| { 0xeb13, KEY_RIGHT }, |
| { 0xeb14, KEY_DOWN }, |
| { 0xeb16, KEY_INFO }, |
| { 0xeb17, KEY_RED }, |
| { 0xeb18, KEY_GREEN }, |
| { 0xeb19, KEY_YELLOW }, |
| { 0xeb1a, KEY_BLUE }, |
| { 0xeb1b, KEY_CHANNELUP }, |
| { 0xeb1c, KEY_VOLUMEUP }, |
| { 0xeb1d, KEY_MUTE }, |
| { 0xeb1e, KEY_VOLUMEDOWN }, |
| { 0xeb1f, KEY_CHANNELDOWN }, |
| { 0xeb40, KEY_PAUSE }, |
| { 0xeb41, KEY_HOME }, |
| { 0xeb42, KEY_MENU }, /* DVD Menu */ |
| { 0xeb43, KEY_SUBTITLE }, |
| { 0xeb44, KEY_TEXT }, /* Teletext */ |
| { 0xeb45, KEY_DELETE }, |
| { 0xeb46, KEY_TV }, |
| { 0xeb47, KEY_DVD }, |
| { 0xeb48, KEY_STOP }, |
| { 0xeb49, KEY_VIDEO }, |
| { 0xeb4a, KEY_AUDIO }, /* Music */ |
| { 0xeb4b, KEY_SCREEN }, /* Pic */ |
| { 0xeb4c, KEY_PLAY }, |
| { 0xeb4d, KEY_BACK }, |
| { 0xeb4e, KEY_REWIND }, |
| { 0xeb4f, KEY_FASTFORWARD }, |
| { 0xeb54, KEY_PREVIOUS }, |
| { 0xeb58, KEY_RECORD }, |
| { 0xeb5c, KEY_NEXT }, |
| |
| /* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */ |
| { 0x1e00, KEY_0 }, |
| { 0x1e01, KEY_1 }, |
| { 0x1e02, KEY_2 }, |
| { 0x1e03, KEY_3 }, |
| { 0x1e04, KEY_4 }, |
| { 0x1e05, KEY_5 }, |
| { 0x1e06, KEY_6 }, |
| { 0x1e07, KEY_7 }, |
| { 0x1e08, KEY_8 }, |
| { 0x1e09, KEY_9 }, |
| { 0x1e0a, KEY_KPASTERISK }, |
| { 0x1e0b, KEY_RED }, |
| { 0x1e0c, KEY_RADIO }, |
| { 0x1e0d, KEY_MENU }, |
| { 0x1e0e, KEY_GRAVE }, /* # */ |
| { 0x1e0f, KEY_MUTE }, |
| { 0x1e10, KEY_VOLUMEUP }, |
| { 0x1e11, KEY_VOLUMEDOWN }, |
| { 0x1e12, KEY_CHANNEL }, |
| { 0x1e14, KEY_UP }, |
| { 0x1e15, KEY_DOWN }, |
| { 0x1e16, KEY_LEFT }, |
| { 0x1e17, KEY_RIGHT }, |
| { 0x1e18, KEY_VIDEO }, |
| { 0x1e19, KEY_AUDIO }, |
| { 0x1e1a, KEY_MEDIA }, |
| { 0x1e1b, KEY_EPG }, |
| { 0x1e1c, KEY_TV }, |
| { 0x1e1e, KEY_NEXT }, |
| { 0x1e1f, KEY_BACK }, |
| { 0x1e20, KEY_CHANNELUP }, |
| { 0x1e21, KEY_CHANNELDOWN }, |
| { 0x1e24, KEY_LAST }, /* Skip backwards */ |
| { 0x1e25, KEY_OK }, |
| { 0x1e29, KEY_BLUE}, |
| { 0x1e2e, KEY_GREEN }, |
| { 0x1e30, KEY_PAUSE }, |
| { 0x1e32, KEY_REWIND }, |
| { 0x1e34, KEY_FASTFORWARD }, |
| { 0x1e35, KEY_PLAY }, |
| { 0x1e36, KEY_STOP }, |
| { 0x1e37, KEY_RECORD }, |
| { 0x1e38, KEY_YELLOW }, |
| { 0x1e3b, KEY_GOTO }, |
| { 0x1e3d, KEY_POWER }, |
| |
| /* Key codes for the Leadtek Winfast DTV Dongle */ |
| { 0x0042, KEY_POWER }, |
| { 0x077c, KEY_TUNER }, |
| { 0x0f4e, KEY_PRINT }, /* PREVIEW */ |
| { 0x0840, KEY_SCREEN }, /* full screen toggle*/ |
| { 0x0f71, KEY_DOT }, /* frequency */ |
| { 0x0743, KEY_0 }, |
| { 0x0c41, KEY_1 }, |
| { 0x0443, KEY_2 }, |
| { 0x0b7f, KEY_3 }, |
| { 0x0e41, KEY_4 }, |
| { 0x0643, KEY_5 }, |
| { 0x097f, KEY_6 }, |
| { 0x0d7e, KEY_7 }, |
| { 0x057c, KEY_8 }, |
| { 0x0a40, KEY_9 }, |
| { 0x0e4e, KEY_CLEAR }, |
| { 0x047c, KEY_CHANNEL }, /* show channel number */ |
| { 0x0f41, KEY_LAST }, /* recall */ |
| { 0x0342, KEY_MUTE }, |
| { 0x064c, KEY_RESERVED }, /* PIP button*/ |
| { 0x0172, KEY_SHUFFLE }, /* SNAPSHOT */ |
| { 0x0c4e, KEY_PLAYPAUSE }, /* TIMESHIFT */ |
| { 0x0b70, KEY_RECORD }, |
| { 0x037d, KEY_VOLUMEUP }, |
| { 0x017d, KEY_VOLUMEDOWN }, |
| { 0x0242, KEY_CHANNELUP }, |
| { 0x007d, KEY_CHANNELDOWN }, |
| |
| /* Key codes for Nova-TD "credit card" remote control. */ |
| { 0x1d00, KEY_0 }, |
| { 0x1d01, KEY_1 }, |
| { 0x1d02, KEY_2 }, |
| { 0x1d03, KEY_3 }, |
| { 0x1d04, KEY_4 }, |
| { 0x1d05, KEY_5 }, |
| { 0x1d06, KEY_6 }, |
| { 0x1d07, KEY_7 }, |
| { 0x1d08, KEY_8 }, |
| { 0x1d09, KEY_9 }, |
| { 0x1d0a, KEY_TEXT }, |
| { 0x1d0d, KEY_MENU }, |
| { 0x1d0f, KEY_MUTE }, |
| { 0x1d10, KEY_VOLUMEUP }, |
| { 0x1d11, KEY_VOLUMEDOWN }, |
| { 0x1d12, KEY_CHANNEL }, |
| { 0x1d14, KEY_UP }, |
| { 0x1d15, KEY_DOWN }, |
| { 0x1d16, KEY_LEFT }, |
| { 0x1d17, KEY_RIGHT }, |
| { 0x1d1c, KEY_TV }, |
| { 0x1d1e, KEY_NEXT }, |
| { 0x1d1f, KEY_BACK }, |
| { 0x1d20, KEY_CHANNELUP }, |
| { 0x1d21, KEY_CHANNELDOWN }, |
| { 0x1d24, KEY_LAST }, |
| { 0x1d25, KEY_OK }, |
| { 0x1d30, KEY_PAUSE }, |
| { 0x1d32, KEY_REWIND }, |
| { 0x1d34, KEY_FASTFORWARD }, |
| { 0x1d35, KEY_PLAY }, |
| { 0x1d36, KEY_STOP }, |
| { 0x1d37, KEY_RECORD }, |
| { 0x1d3b, KEY_GOTO }, |
| { 0x1d3d, KEY_POWER }, |
| |
| /* Key codes for the Pixelview SBTVD remote (proto NEC) */ |
| { 0x8613, KEY_MUTE }, |
| { 0x8612, KEY_POWER }, |
| { 0x8601, KEY_1 }, |
| { 0x8602, KEY_2 }, |
| { 0x8603, KEY_3 }, |
| { 0x8604, KEY_4 }, |
| { 0x8605, KEY_5 }, |
| { 0x8606, KEY_6 }, |
| { 0x8607, KEY_7 }, |
| { 0x8608, KEY_8 }, |
| { 0x8609, KEY_9 }, |
| { 0x8600, KEY_0 }, |
| { 0x860d, KEY_CHANNELUP }, |
| { 0x8619, KEY_CHANNELDOWN }, |
| { 0x8610, KEY_VOLUMEUP }, |
| { 0x860c, KEY_VOLUMEDOWN }, |
| |
| { 0x860a, KEY_CAMERA }, |
| { 0x860b, KEY_ZOOM }, |
| { 0x861b, KEY_BACKSPACE }, |
| { 0x8615, KEY_ENTER }, |
| |
| { 0x861d, KEY_UP }, |
| { 0x861e, KEY_DOWN }, |
| { 0x860e, KEY_LEFT }, |
| { 0x860f, KEY_RIGHT }, |
| |
| { 0x8618, KEY_RECORD }, |
| { 0x861a, KEY_STOP }, |
| |
| /* Key codes for the EvolutePC TVWay+ remote (proto NEC) */ |
| { 0x7a00, KEY_MENU }, |
| { 0x7a01, KEY_RECORD }, |
| { 0x7a02, KEY_PLAY }, |
| { 0x7a03, KEY_STOP }, |
| { 0x7a10, KEY_CHANNELUP }, |
| { 0x7a11, KEY_CHANNELDOWN }, |
| { 0x7a12, KEY_VOLUMEUP }, |
| { 0x7a13, KEY_VOLUMEDOWN }, |
| { 0x7a40, KEY_POWER }, |
| { 0x7a41, KEY_MUTE }, |
| }; |
| |
| /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */ |
| static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = { |
| BAND_UHF | BAND_VHF, |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
| | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), |
| |
| 712, |
| 41, |
| |
| 0, |
| 118, |
| |
| 0, |
| 4095, |
| 0, |
| 0, |
| |
| 42598, |
| 17694, |
| 45875, |
| 2621, |
| 0, |
| 76, |
| 139, |
| 52, |
| 59, |
| 107, |
| 172, |
| 57, |
| 70, |
| |
| 21, |
| 25, |
| 28, |
| 48, |
| |
| 1, |
| { 0, |
| 107, |
| 51800, |
| 24700 |
| }, |
| }; |
| |
| static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = { |
| BAND_UHF | BAND_VHF, |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
| | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), |
| |
| 712, |
| 41, |
| |
| 0, |
| 118, |
| |
| 0, |
| 4095, |
| 0, |
| 0, |
| |
| 42598, |
| 16384, |
| 42598, |
| 0, |
| |
| 0, |
| 137, |
| 255, |
| |
| 0, |
| 255, |
| |
| 0, |
| 0, |
| |
| 0, |
| 41, |
| |
| 15, |
| 25, |
| |
| 28, |
| 48, |
| |
| 0, |
| }; |
| |
| static struct dibx000_bandwidth_config stk7700p_pll_config = { |
| 60000, 30000, |
| 1, 8, 3, 1, 0, |
| 0, 0, 1, 1, 0, |
| (3 << 14) | (1 << 12) | (524 << 0), |
| 60258167, |
| 20452225, |
| 30000000, |
| }; |
| |
| static struct dib7000m_config stk7700p_dib7000m_config = { |
| .dvbt_mode = 1, |
| .output_mpeg2_in_188_bytes = 1, |
| .quartz_direct = 1, |
| |
| .agc_config_count = 1, |
| .agc = &stk7700p_7000m_mt2060_agc_config, |
| .bw = &stk7700p_pll_config, |
| |
| .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, |
| }; |
| |
| static struct dib7000p_config stk7700p_dib7000p_config = { |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 1, |
| .agc = &stk7700p_7000p_mt2060_agc_config, |
| .bw = &stk7700p_pll_config, |
| |
| .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, |
| }; |
| |
| static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_state *st = adap->dev->priv; |
| /* unless there is no real power management in DVB - we leave the device on GPIO6 */ |
| |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50); |
| |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); |
| dib0700_ctrl_clock(adap->dev, 72, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100); |
| |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| |
| st->mt2060_if1[0] = 1220; |
| |
| if (dib7000pc_detection(&adap->dev->i2c_adap)) { |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config); |
| st->is_dib7000pc = 1; |
| } else |
| adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static struct mt2060_config stk7700p_mt2060_config = { |
| 0x60 |
| }; |
| |
| static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; |
| struct dib0700_state *st = adap->dev->priv; |
| struct i2c_adapter *tun_i2c; |
| s8 a; |
| int if1=1220; |
| if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && |
| adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { |
| if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; |
| } |
| if (st->is_dib7000pc) |
| tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); |
| else |
| tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); |
| |
| return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config, |
| if1) == NULL ? -ENODEV : 0; |
| } |
| |
| /* DIB7070 generic */ |
| static struct dibx000_agc_config dib7070_agc_config = { |
| BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
| | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), |
| |
| 600, |
| 10, |
| |
| 0, |
| 118, |
| |
| 0, |
| 3530, |
| 1, |
| 5, |
| |
| 65535, |
| 0, |
| |
| 65535, |
| 0, |
| |
| 0, |
| 40, |
| 183, |
| 206, |
| 255, |
| 72, |
| 152, |
| 88, |
| 90, |
| |
| 17, |
| 27, |
| 23, |
| 51, |
| |
| 0, |
| }; |
| |
| static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) |
| { |
| deb_info("reset: %d", onoff); |
| return dib7000p_set_gpio(fe, 8, 0, !onoff); |
| } |
| |
| static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) |
| { |
| deb_info("sleep: %d", onoff); |
| return dib7000p_set_gpio(fe, 9, 0, onoff); |
| } |
| |
| static struct dib0070_config dib7070p_dib0070_config[2] = { |
| { |
| .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, |
| .reset = dib7070_tuner_reset, |
| .sleep = dib7070_tuner_sleep, |
| .clock_khz = 12000, |
| .clock_pad_drive = 4, |
| .charge_pump = 2, |
| }, { |
| .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, |
| .reset = dib7070_tuner_reset, |
| .sleep = dib7070_tuner_sleep, |
| .clock_khz = 12000, |
| .charge_pump = 2, |
| } |
| }; |
| |
| static struct dib0070_config dib7770p_dib0070_config = { |
| .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, |
| .reset = dib7070_tuner_reset, |
| .sleep = dib7070_tuner_sleep, |
| .clock_khz = 12000, |
| .clock_pad_drive = 0, |
| .flip_chip = 1, |
| .charge_pump = 2, |
| }; |
| |
| static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep) |
| { |
| struct dvb_usb_adapter *adap = fe->dvb->priv; |
| struct dib0700_adapter_state *state = adap->priv; |
| |
| u16 offset; |
| u8 band = BAND_OF_FREQUENCY(fep->frequency/1000); |
| switch (band) { |
| case BAND_VHF: offset = 950; break; |
| case BAND_UHF: |
| default: offset = 550; break; |
| } |
| deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe)); |
| dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); |
| return state->set_param_save(fe, fep); |
| } |
| |
| static int dib7770_set_param_override(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *fep) |
| { |
| struct dvb_usb_adapter *adap = fe->dvb->priv; |
| struct dib0700_adapter_state *state = adap->priv; |
| |
| u16 offset; |
| u8 band = BAND_OF_FREQUENCY(fep->frequency/1000); |
| switch (band) { |
| case BAND_VHF: |
| dib7000p_set_gpio(fe, 0, 0, 1); |
| offset = 850; |
| break; |
| case BAND_UHF: |
| default: |
| dib7000p_set_gpio(fe, 0, 0, 0); |
| offset = 250; |
| break; |
| } |
| deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe)); |
| dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); |
| return state->set_param_save(fe, fep); |
| } |
| |
| static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_adapter_state *st = adap->priv; |
| struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, |
| DIBX000_I2C_INTERFACE_TUNER, 1); |
| |
| if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, |
| &dib7770p_dib0070_config) == NULL) |
| return -ENODEV; |
| |
| st->set_param_save = adap->fe->ops.tuner_ops.set_params; |
| adap->fe->ops.tuner_ops.set_params = dib7770_set_param_override; |
| return 0; |
| } |
| |
| static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_adapter_state *st = adap->priv; |
| struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); |
| |
| if (adap->id == 0) { |
| if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL) |
| return -ENODEV; |
| } else { |
| if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL) |
| return -ENODEV; |
| } |
| |
| st->set_param_save = adap->fe->ops.tuner_ops.set_params; |
| adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override; |
| return 0; |
| } |
| |
| static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) |
| { |
| return dib7000p_pid_filter(adapter->fe, index, pid, onoff); |
| } |
| |
| static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) |
| { |
| return dib7000p_pid_filter_ctrl(adapter->fe, onoff); |
| } |
| |
| static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { |
| 60000, 15000, |
| 1, 20, 3, 1, 0, |
| 0, 0, 1, 1, 2, |
| (3 << 14) | (1 << 12) | (524 << 0), |
| (0 << 25) | 0, |
| 20452225, |
| 12000000, |
| }; |
| |
| static struct dib7000p_config dib7070p_dib7000p_config = { |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 1, |
| .agc = &dib7070_agc_config, |
| .bw = &dib7070_bw_config_12_mhz, |
| .tuner_is_baseband = 1, |
| .spur_protect = 1, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| |
| .hostbus_diversity = 1, |
| }; |
| |
| /* STK7070P */ |
| static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct usb_device_descriptor *p = &adap->dev->udev->descriptor; |
| if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && |
| p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); |
| else |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| |
| dib0700_ctrl_clock(adap->dev, 72, 1); |
| |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| |
| if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, |
| &dib7070p_dib7000p_config) != 0) { |
| err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", |
| __func__); |
| return -ENODEV; |
| } |
| |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, |
| &dib7070p_dib7000p_config); |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| /* DIB807x generic */ |
| static struct dibx000_agc_config dib807x_agc_config[2] = { |
| { |
| BAND_VHF, |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, |
| * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, |
| * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0, |
| * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, |
| * P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) | |
| (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | |
| (0 << 0), /* setup*/ |
| |
| 600, /* inv_gain*/ |
| 10, /* time_stabiliz*/ |
| |
| 0, /* alpha_level*/ |
| 118, /* thlock*/ |
| |
| 0, /* wbd_inv*/ |
| 3530, /* wbd_ref*/ |
| 1, /* wbd_sel*/ |
| 5, /* wbd_alpha*/ |
| |
| 65535, /* agc1_max*/ |
| 0, /* agc1_min*/ |
| |
| 65535, /* agc2_max*/ |
| 0, /* agc2_min*/ |
| |
| 0, /* agc1_pt1*/ |
| 40, /* agc1_pt2*/ |
| 183, /* agc1_pt3*/ |
| 206, /* agc1_slope1*/ |
| 255, /* agc1_slope2*/ |
| 72, /* agc2_pt1*/ |
| 152, /* agc2_pt2*/ |
| 88, /* agc2_slope1*/ |
| 90, /* agc2_slope2*/ |
| |
| 17, /* alpha_mant*/ |
| 27, /* alpha_exp*/ |
| 23, /* beta_mant*/ |
| 51, /* beta_exp*/ |
| |
| 0, /* perform_agc_softsplit*/ |
| }, { |
| BAND_UHF, |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, |
| * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, |
| * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, |
| * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, |
| * P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) | |
| (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | |
| (0 << 0), /* setup */ |
| |
| 600, /* inv_gain*/ |
| 10, /* time_stabiliz*/ |
| |
| 0, /* alpha_level*/ |
| 118, /* thlock*/ |
| |
| 0, /* wbd_inv*/ |
| 3530, /* wbd_ref*/ |
| 1, /* wbd_sel*/ |
| 5, /* wbd_alpha*/ |
| |
| 65535, /* agc1_max*/ |
| 0, /* agc1_min*/ |
| |
| 65535, /* agc2_max*/ |
| 0, /* agc2_min*/ |
| |
| 0, /* agc1_pt1*/ |
| 40, /* agc1_pt2*/ |
| 183, /* agc1_pt3*/ |
| 206, /* agc1_slope1*/ |
| 255, /* agc1_slope2*/ |
| 72, /* agc2_pt1*/ |
| 152, /* agc2_pt2*/ |
| 88, /* agc2_slope1*/ |
| 90, /* agc2_slope2*/ |
| |
| 17, /* alpha_mant*/ |
| 27, /* alpha_exp*/ |
| 23, /* beta_mant*/ |
| 51, /* beta_exp*/ |
| |
| 0, /* perform_agc_softsplit*/ |
| } |
| }; |
| |
| static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = { |
| 60000, 15000, /* internal, sampling*/ |
| 1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/ |
| 0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core, |
| ADClkSrc, modulo */ |
| (3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/ |
| (0 << 25) | 0, /* ifreq = 0.000000 MHz*/ |
| 18179755, /* timf*/ |
| 12000000, /* xtal_hz*/ |
| }; |
| |
| static struct dib8000_config dib807x_dib8000_config[2] = { |
| { |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 2, |
| .agc = dib807x_agc_config, |
| .pll = &dib807x_bw_config_12_mhz, |
| .tuner_is_baseband = 1, |
| |
| .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, |
| |
| .hostbus_diversity = 1, |
| .div_cfg = 1, |
| .agc_control = &dib0070_ctrl_agc_filter, |
| .output_mode = OUTMODE_MPEG2_FIFO, |
| .drives = 0x2d98, |
| }, { |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 2, |
| .agc = dib807x_agc_config, |
| .pll = &dib807x_bw_config_12_mhz, |
| .tuner_is_baseband = 1, |
| |
| .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, |
| |
| .hostbus_diversity = 1, |
| .agc_control = &dib0070_ctrl_agc_filter, |
| .output_mode = OUTMODE_MPEG2_FIFO, |
| .drives = 0x2d98, |
| } |
| }; |
| |
| static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff) |
| { |
| return dib8000_set_gpio(fe, 5, 0, !onoff); |
| } |
| |
| static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff) |
| { |
| return dib8000_set_gpio(fe, 0, 0, onoff); |
| } |
| |
| static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = { |
| { 240, 7}, |
| { 0xffff, 6}, |
| }; |
| |
| static struct dib0070_config dib807x_dib0070_config[2] = { |
| { |
| .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, |
| .reset = dib80xx_tuner_reset, |
| .sleep = dib80xx_tuner_sleep, |
| .clock_khz = 12000, |
| .clock_pad_drive = 4, |
| .vga_filter = 1, |
| .force_crystal_mode = 1, |
| .enable_third_order_filter = 1, |
| .charge_pump = 0, |
| .wbd_gain = dib8070_wbd_gain_cfg, |
| .osc_buffer_state = 0, |
| .freq_offset_khz_uhf = -100, |
| .freq_offset_khz_vhf = -100, |
| }, { |
| .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, |
| .reset = dib80xx_tuner_reset, |
| .sleep = dib80xx_tuner_sleep, |
| .clock_khz = 12000, |
| .clock_pad_drive = 2, |
| .vga_filter = 1, |
| .force_crystal_mode = 1, |
| .enable_third_order_filter = 1, |
| .charge_pump = 0, |
| .wbd_gain = dib8070_wbd_gain_cfg, |
| .osc_buffer_state = 0, |
| .freq_offset_khz_uhf = -25, |
| .freq_offset_khz_vhf = -25, |
| } |
| }; |
| |
| static int dib807x_set_param_override(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *fep) |
| { |
| struct dvb_usb_adapter *adap = fe->dvb->priv; |
| struct dib0700_adapter_state *state = adap->priv; |
| |
| u16 offset = dib0070_wbd_offset(fe); |
| u8 band = BAND_OF_FREQUENCY(fep->frequency/1000); |
| switch (band) { |
| case BAND_VHF: |
| offset += 750; |
| break; |
| case BAND_UHF: /* fall-thru wanted */ |
| default: |
| offset += 250; break; |
| } |
| deb_info("WBD for DiB8000: %d\n", offset); |
| dib8000_set_wbd_ref(fe, offset); |
| |
| return state->set_param_save(fe, fep); |
| } |
| |
| static int dib807x_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_adapter_state *st = adap->priv; |
| struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe, |
| DIBX000_I2C_INTERFACE_TUNER, 1); |
| |
| if (adap->id == 0) { |
| if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, |
| &dib807x_dib0070_config[0]) == NULL) |
| return -ENODEV; |
| } else { |
| if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, |
| &dib807x_dib0070_config[1]) == NULL) |
| return -ENODEV; |
| } |
| |
| st->set_param_save = adap->fe->ops.tuner_ops.set_params; |
| adap->fe->ops.tuner_ops.set_params = dib807x_set_param_override; |
| return 0; |
| } |
| |
| static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index, |
| u16 pid, int onoff) |
| { |
| return dib8000_pid_filter(adapter->fe, index, pid, onoff); |
| } |
| |
| static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter, |
| int onoff) |
| { |
| return dib8000_pid_filter_ctrl(adapter->fe, onoff); |
| } |
| |
| /* STK807x */ |
| static int stk807x_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| |
| dib0700_ctrl_clock(adap->dev, 72, 1); |
| |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| |
| dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, |
| 0x80); |
| |
| adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, |
| &dib807x_dib8000_config[0]); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| /* STK807xPVR */ |
| static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap) |
| { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); |
| msleep(30); |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(500); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| |
| dib0700_ctrl_clock(adap->dev, 72, 1); |
| |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| |
| /* initialize IC 0 */ |
| dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80); |
| |
| adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, |
| &dib807x_dib8000_config[0]); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap) |
| { |
| /* initialize IC 1 */ |
| dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82); |
| |
| adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, |
| &dib807x_dib8000_config[1]); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| /* STK8096GP */ |
| struct dibx000_agc_config dib8090_agc_config[2] = { |
| { |
| BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, |
| * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, |
| * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
| | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), |
| |
| 787, |
| 10, |
| |
| 0, |
| 118, |
| |
| 0, |
| 3530, |
| 1, |
| 5, |
| |
| 65535, |
| 0, |
| |
| 65535, |
| 0, |
| |
| 0, |
| 32, |
| 114, |
| 143, |
| 144, |
| 114, |
| 227, |
| 116, |
| 117, |
| |
| 28, |
| 26, |
| 31, |
| 51, |
| |
| 0, |
| }, |
| { |
| BAND_CBAND, |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, |
| * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, |
| * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
| | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), |
| |
| 787, |
| 10, |
| |
| 0, |
| 118, |
| |
| 0, |
| 3530, |
| 1, |
| 5, |
| |
| 0, |
| 0, |
| |
| 65535, |
| 0, |
| |
| 0, |
| 32, |
| 114, |
| 143, |
| 144, |
| 114, |
| 227, |
| 116, |
| 117, |
| |
| 28, |
| 26, |
| 31, |
| 51, |
| |
| 0, |
| } |
| }; |
| |
| static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = { |
| 54000, 13500, |
| 1, 18, 3, 1, 0, |
| 0, 0, 1, 1, 2, |
| (3 << 14) | (1 << 12) | (599 << 0), |
| (0 << 25) | 0, |
| 20199727, |
| 12000000, |
| }; |
| |
| static int dib8090_get_adc_power(struct dvb_frontend *fe) |
| { |
| return dib8000_get_adc_power(fe, 1); |
| } |
| |
| static struct dib8000_config dib809x_dib8000_config = { |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 2, |
| .agc = dib8090_agc_config, |
| .agc_control = dib0090_dcc_freq, |
| .pll = &dib8090_pll_config_12mhz, |
| .tuner_is_baseband = 1, |
| |
| .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, |
| |
| .hostbus_diversity = 1, |
| .div_cfg = 0x31, |
| .output_mode = OUTMODE_MPEG2_FIFO, |
| .drives = 0x2d98, |
| .diversity_delay = 144, |
| .refclksel = 3, |
| }; |
| |
| static struct dib0090_config dib809x_dib0090_config = { |
| .io.pll_bypass = 1, |
| .io.pll_range = 1, |
| .io.pll_prediv = 1, |
| .io.pll_loopdiv = 20, |
| .io.adc_clock_ratio = 8, |
| .io.pll_int_loop_filt = 0, |
| .io.clock_khz = 12000, |
| .reset = dib80xx_tuner_reset, |
| .sleep = dib80xx_tuner_sleep, |
| .clkouttobamse = 1, |
| .analog_output = 1, |
| .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS, |
| .wbd_vhf_offset = 100, |
| .wbd_cband_offset = 450, |
| .use_pwm_agc = 1, |
| .clkoutdrive = 1, |
| .get_adc_power = dib8090_get_adc_power, |
| .freq_offset_khz_uhf = 0, |
| .freq_offset_khz_vhf = -143, |
| }; |
| |
| static int dib8096_set_param_override(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *fep) |
| { |
| struct dvb_usb_adapter *adap = fe->dvb->priv; |
| struct dib0700_adapter_state *state = adap->priv; |
| u8 band = BAND_OF_FREQUENCY(fep->frequency/1000); |
| u16 offset; |
| int ret = 0; |
| enum frontend_tune_state tune_state = CT_SHUTDOWN; |
| u16 ltgain, rf_gain_limit; |
| |
| ret = state->set_param_save(fe, fep); |
| if (ret < 0) |
| return ret; |
| |
| switch (band) { |
| case BAND_VHF: |
| offset = 100; |
| break; |
| case BAND_UHF: |
| offset = 550; |
| break; |
| default: |
| offset = 0; |
| break; |
| } |
| offset += (dib0090_get_wbd_offset(fe) * 8 * 18 / 33 + 1) / 2; |
| dib8000_set_wbd_ref(fe, offset); |
| |
| |
| if (band == BAND_CBAND) { |
| deb_info("tuning in CBAND - soft-AGC startup\n"); |
| /* TODO specific wbd target for dib0090 - needed for startup ? */ |
| dib0090_set_tune_state(fe, CT_AGC_START); |
| do { |
| ret = dib0090_gain_control(fe); |
| msleep(ret); |
| tune_state = dib0090_get_tune_state(fe); |
| if (tune_state == CT_AGC_STEP_0) |
| dib8000_set_gpio(fe, 6, 0, 1); |
| else if (tune_state == CT_AGC_STEP_1) { |
| dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, <gain); |
| if (rf_gain_limit == 0) |
| dib8000_set_gpio(fe, 6, 0, 0); |
| } |
| } while (tune_state < CT_AGC_STOP); |
| dib0090_pwm_gain_reset(fe); |
| dib8000_pwm_agc_reset(fe); |
| dib8000_set_tune_state(fe, CT_DEMOD_START); |
| } else { |
| deb_info("not tuning in CBAND - standard AGC startup\n"); |
| dib0090_pwm_gain_reset(fe); |
| } |
| |
| return 0; |
| } |
| |
| static int dib809x_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_adapter_state *st = adap->priv; |
| struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); |
| |
| if (dvb_attach(dib0090_register, adap->fe, tun_i2c, &dib809x_dib0090_config) == NULL) |
| return -ENODEV; |
| |
| st->set_param_save = adap->fe->ops.tuner_ops.set_params; |
| adap->fe->ops.tuner_ops.set_params = dib8096_set_param_override; |
| return 0; |
| } |
| |
| static int stk809x_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| |
| dib0700_ctrl_clock(adap->dev, 72, 1); |
| |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| |
| dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80); |
| |
| adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| /* STK7070PD */ |
| static struct dib7000p_config stk7070pd_dib7000p_config[2] = { |
| { |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 1, |
| .agc = &dib7070_agc_config, |
| .bw = &dib7070_bw_config_12_mhz, |
| .tuner_is_baseband = 1, |
| .spur_protect = 1, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| |
| .hostbus_diversity = 1, |
| }, { |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 1, |
| .agc = &dib7070_agc_config, |
| .bw = &dib7070_bw_config_12_mhz, |
| .tuner_is_baseband = 1, |
| .spur_protect = 1, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| |
| .hostbus_diversity = 1, |
| } |
| }; |
| |
| static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap) |
| { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| |
| dib0700_ctrl_clock(adap->dev, 72, 1); |
| |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| |
| if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, |
| stk7070pd_dib7000p_config) != 0) { |
| err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", |
| __func__); |
| return -ENODEV; |
| } |
| |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]); |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap) |
| { |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]); |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| /* S5H1411 */ |
| static struct s5h1411_config pinnacle_801e_config = { |
| .output_mode = S5H1411_PARALLEL_OUTPUT, |
| .gpio = S5H1411_GPIO_OFF, |
| .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, |
| .qam_if = S5H1411_IF_44000, |
| .vsb_if = S5H1411_IF_44000, |
| .inversion = S5H1411_INVERSION_OFF, |
| .status_mode = S5H1411_DEMODLOCKING |
| }; |
| |
| /* Pinnacle PCTV HD Pro 801e GPIOs map: |
| GPIO0 - currently unknown |
| GPIO1 - xc5000 tuner reset |
| GPIO2 - CX25843 sleep |
| GPIO3 - currently unknown |
| GPIO4 - currently unknown |
| GPIO6 - currently unknown |
| GPIO7 - currently unknown |
| GPIO9 - currently unknown |
| GPIO10 - CX25843 reset |
| */ |
| static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_state *st = adap->dev->priv; |
| |
| /* Make use of the new i2c functions from FW 1.20 */ |
| st->fw_use_new_i2c_api = 1; |
| |
| /* The s5h1411 requires the dib0700 to not be in master mode */ |
| st->disable_streaming_master_mode = 1; |
| |
| /* All msleep values taken from Windows USB trace */ |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); |
| dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0); |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(400); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| msleep(60); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(30); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0); |
| msleep(30); |
| |
| /* Put the CX25843 to sleep for now since we're in digital mode */ |
| dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); |
| |
| /* GPIOs are initialized, do the attach */ |
| adap->fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config, |
| &adap->dev->i2c_adap); |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static int dib0700_xc5000_tuner_callback(void *priv, int component, |
| int command, int arg) |
| { |
| struct dvb_usb_adapter *adap = priv; |
| |
| if (command == XC5000_TUNER_RESET) { |
| /* Reset the tuner */ |
| dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1); |
| msleep(10); |
| } else { |
| err("xc5000: unknown tuner callback command: %d\n", command); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static struct xc5000_config s5h1411_xc5000_tunerconfig = { |
| .i2c_address = 0x64, |
| .if_khz = 5380, |
| }; |
| |
| static int xc5000_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| /* FIXME: generalize & move to common area */ |
| adap->fe->callback = dib0700_xc5000_tuner_callback; |
| |
| return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap, |
| &s5h1411_xc5000_tunerconfig) |
| == NULL ? -ENODEV : 0; |
| } |
| |
| static struct lgdt3305_config hcw_lgdt3305_config = { |
| .i2c_addr = 0x0e, |
| .mpeg_mode = LGDT3305_MPEG_PARALLEL, |
| .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, |
| .tpvalid_polarity = LGDT3305_TP_VALID_LOW, |
| .deny_i2c_rptr = 0, |
| .spectral_inversion = 1, |
| .qam_if_khz = 6000, |
| .vsb_if_khz = 6000, |
| .usref_8vsb = 0x0500, |
| }; |
| |
| static struct mxl5007t_config hcw_mxl5007t_config = { |
| .xtal_freq_hz = MxL_XTAL_25_MHZ, |
| .if_freq_hz = MxL_IF_6_MHZ, |
| .invert_if = 1, |
| }; |
| |
| /* TIGER-ATSC map: |
| GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled) |
| GPIO1 - ANT_SEL (H: VPA, L: MCX) |
| GPIO4 - SCL2 |
| GPIO6 - EN_TUNER |
| GPIO7 - SDA2 |
| GPIO10 - DEM_RST |
| |
| MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB |
| */ |
| static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_state *st = adap->dev->priv; |
| |
| /* Make use of the new i2c functions from FW 1.20 */ |
| st->fw_use_new_i2c_api = 1; |
| |
| st->disable_streaming_master_mode = 1; |
| |
| /* fe power enable */ |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); |
| msleep(30); |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(30); |
| |
| /* demod reset */ |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(30); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| msleep(30); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(30); |
| |
| adap->fe = dvb_attach(lgdt3305_attach, |
| &hcw_lgdt3305_config, |
| &adap->dev->i2c_adap); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| return dvb_attach(mxl5007t_attach, adap->fe, |
| &adap->dev->i2c_adap, 0x60, |
| &hcw_mxl5007t_config) == NULL ? -ENODEV : 0; |
| } |
| |
| |
| /* DVB-USB and USB stuff follows */ |
| struct usb_device_id dib0700_usb_id_table[] = { |
| /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) }, |
| { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) }, |
| /* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) }, |
| { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) }, |
| { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) }, |
| { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) }, |
| /* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) }, |
| { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) }, |
| { USB_DEVICE(USB_VID_TERRATEC, |
| USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) }, |
| { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) }, |
| /* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) }, |
| { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) }, |
| { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) }, |
| { USB_DEVICE(USB_VID_PINNACLE, |
| USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) }, |
| { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) }, |
| /* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) }, |
| { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) }, |
| { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) }, |
| { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) }, |
| { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) }, |
| /* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) }, |
| { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) }, |
| { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) }, |
| { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) }, |
| /* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) }, |
| { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) }, |
| { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) }, |
| { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) }, |
| { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) }, |
| /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, |
| { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, |
| { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, |
| { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, |
| /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, |
| { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, |
| { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) }, |
| { USB_DEVICE(USB_VID_TERRATEC, |
| USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) }, |
| { USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) }, |
| /* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) }, |
| { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) }, |
| { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) }, |
| /* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) }, |
| { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) }, |
| { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) }, |
| { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) }, |
| { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) }, |
| /* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) }, |
| { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) }, |
| { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV73ESE) }, |
| { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV282E) }, |
| { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) }, |
| /* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) }, |
| { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) }, |
| { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) }, |
| { USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) }, |
| { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) }, |
| /* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) }, |
| { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) }, |
| { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) }, |
| { 0 } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); |
| |
| #define DIB0700_DEFAULT_DEVICE_PROPERTIES \ |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, \ |
| .usb_ctrl = DEVICE_SPECIFIC, \ |
| .firmware = "dvb-usb-dib0700-1.20.fw", \ |
| .download_firmware = dib0700_download_firmware, \ |
| .no_reconnect = 1, \ |
| .size_of_priv = sizeof(struct dib0700_state), \ |
| .i2c_algo = &dib0700_i2c_algo, \ |
| .identify_state = dib0700_identify_state |
| |
| #define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \ |
| .streaming_ctrl = dib0700_streaming_ctrl, \ |
| .stream = { \ |
| .type = USB_BULK, \ |
| .count = 4, \ |
| .endpoint = ep, \ |
| .u = { \ |
| .bulk = { \ |
| .buffersize = 39480, \ |
| } \ |
| } \ |
| } |
| |
| struct dvb_usb_device_properties dib0700_devices[] = { |
| { |
| DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk70x0p_pid_filter, |
| .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, |
| .frontend_attach = stk7700p_frontend_attach, |
| .tuner_attach = stk7700p_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| }, |
| }, |
| |
| .num_device_descs = 8, |
| .devices = { |
| { "DiBcom STK7700P reference design", |
| { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-T Stick", |
| { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL }, |
| { NULL }, |
| }, |
| { "AVerMedia AVerTV DVB-T Volar", |
| { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] }, |
| { NULL }, |
| }, |
| { "Compro Videomate U500", |
| { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] }, |
| { NULL }, |
| }, |
| { "Uniwill STK7700P based (Hama and others)", |
| { &dib0700_usb_id_table[7], NULL }, |
| { NULL }, |
| }, |
| { "Leadtek Winfast DTV Dongle (STK7700P based)", |
| { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] }, |
| { NULL }, |
| }, |
| { "AVerMedia AVerTV DVB-T Express", |
| { &dib0700_usb_id_table[20] }, |
| { NULL }, |
| }, |
| { "Gigabyte U7000", |
| { &dib0700_usb_id_table[21], NULL }, |
| { NULL }, |
| } |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 2, |
| .adapter = { |
| { |
| .frontend_attach = bristol_frontend_attach, |
| .tuner_attach = bristol_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| }, { |
| .frontend_attach = bristol_frontend_attach, |
| .tuner_attach = bristol_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x03), |
| } |
| }, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "Hauppauge Nova-T 500 Dual DVB-T", |
| { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL }, |
| { NULL }, |
| }, |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 2, |
| .adapter = { |
| { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk70x0p_pid_filter, |
| .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, |
| .frontend_attach = stk7700d_frontend_attach, |
| .tuner_attach = stk7700d_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| }, { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk70x0p_pid_filter, |
| .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, |
| .frontend_attach = stk7700d_frontend_attach, |
| .tuner_attach = stk7700d_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x03), |
| } |
| }, |
| |
| .num_device_descs = 5, |
| .devices = { |
| { "Pinnacle PCTV 2000e", |
| { &dib0700_usb_id_table[11], NULL }, |
| { NULL }, |
| }, |
| { "Terratec Cinergy DT XS Diversity", |
| { &dib0700_usb_id_table[12], NULL }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity", |
| { &dib0700_usb_id_table[13], NULL }, |
| { NULL }, |
| }, |
| { "DiBcom STK7700D reference design", |
| { &dib0700_usb_id_table[14], NULL }, |
| { NULL }, |
| }, |
| { "YUAN High-Tech DiBcom STK7700D", |
| { &dib0700_usb_id_table[55], NULL }, |
| { NULL }, |
| }, |
| |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk70x0p_pid_filter, |
| .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, |
| .frontend_attach = stk7700P2_frontend_attach, |
| .tuner_attach = stk7700d_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| }, |
| }, |
| |
| .num_device_descs = 3, |
| .devices = { |
| { "ASUS My Cinema U3000 Mini DVBT Tuner", |
| { &dib0700_usb_id_table[23], NULL }, |
| { NULL }, |
| }, |
| { "Yuan EC372S", |
| { &dib0700_usb_id_table[31], NULL }, |
| { NULL }, |
| }, |
| { "Terratec Cinergy T Express", |
| { &dib0700_usb_id_table[42], NULL }, |
| { NULL }, |
| } |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk70x0p_pid_filter, |
| .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, |
| .frontend_attach = stk7070p_frontend_attach, |
| .tuner_attach = dib7070p_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = sizeof(struct dib0700_adapter_state), |
| }, |
| }, |
| |
| .num_device_descs = 11, |
| .devices = { |
| { "DiBcom STK7070P reference design", |
| { &dib0700_usb_id_table[15], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle PCTV DVB-T Flash Stick", |
| { &dib0700_usb_id_table[16], NULL }, |
| { NULL }, |
| }, |
| { "Artec T14BR DVB-T", |
| { &dib0700_usb_id_table[22], NULL }, |
| { NULL }, |
| }, |
| { "ASUS My Cinema U3100 Mini DVBT Tuner", |
| { &dib0700_usb_id_table[24], NULL }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-T Stick", |
| { &dib0700_usb_id_table[25], NULL }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-T MyTV.t", |
| { &dib0700_usb_id_table[26], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle PCTV 72e", |
| { &dib0700_usb_id_table[29], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle PCTV 73e", |
| { &dib0700_usb_id_table[30], NULL }, |
| { NULL }, |
| }, |
| { "Elgato EyeTV DTT", |
| { &dib0700_usb_id_table[49], NULL }, |
| { NULL }, |
| }, |
| { "Yuan PD378S", |
| { &dib0700_usb_id_table[45], NULL }, |
| { NULL }, |
| }, |
| { "Elgato EyeTV Dtt Dlx PD378S", |
| { &dib0700_usb_id_table[50], NULL }, |
| { NULL }, |
| }, |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk70x0p_pid_filter, |
| .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, |
| .frontend_attach = stk7070p_frontend_attach, |
| .tuner_attach = dib7070p_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = sizeof(struct dib0700_adapter_state), |
| }, |
| }, |
| |
| .num_device_descs = 3, |
| .devices = { |
| { "Pinnacle PCTV 73A", |
| { &dib0700_usb_id_table[56], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle PCTV 73e SE", |
| { &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle PCTV 282e", |
| { &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL }, |
| { NULL }, |
| }, |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 2, |
| .adapter = { |
| { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk70x0p_pid_filter, |
| .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, |
| .frontend_attach = stk7070pd_frontend_attach0, |
| .tuner_attach = dib7070p_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = sizeof(struct dib0700_adapter_state), |
| }, { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk70x0p_pid_filter, |
| .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, |
| .frontend_attach = stk7070pd_frontend_attach1, |
| .tuner_attach = dib7070p_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x03), |
| |
| .size_of_priv = sizeof(struct dib0700_adapter_state), |
| } |
| }, |
| |
| .num_device_descs = 6, |
| .devices = { |
| { "DiBcom STK7070PD reference design", |
| { &dib0700_usb_id_table[17], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle PCTV Dual DVB-T Diversity Stick", |
| { &dib0700_usb_id_table[18], NULL }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-TD Stick (52009)", |
| { &dib0700_usb_id_table[35], NULL }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-TD-500 (84xxx)", |
| { &dib0700_usb_id_table[36], NULL }, |
| { NULL }, |
| }, |
| { "Terratec Cinergy DT USB XS Diversity/ T5", |
| { &dib0700_usb_id_table[43], |
| &dib0700_usb_id_table[53], NULL}, |
| { NULL }, |
| }, |
| { "Sony PlayTV", |
| { &dib0700_usb_id_table[44], NULL }, |
| { NULL }, |
| } |
| }, |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk70x0p_pid_filter, |
| .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, |
| .frontend_attach = stk7700ph_frontend_attach, |
| .tuner_attach = stk7700ph_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = sizeof(struct |
| dib0700_adapter_state), |
| }, |
| }, |
| |
| .num_device_descs = 9, |
| .devices = { |
| { "Terratec Cinergy HT USB XE", |
| { &dib0700_usb_id_table[27], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle Expresscard 320cx", |
| { &dib0700_usb_id_table[28], NULL }, |
| { NULL }, |
| }, |
| { "Terratec Cinergy HT Express", |
| { &dib0700_usb_id_table[32], NULL }, |
| { NULL }, |
| }, |
| { "Gigabyte U8000-RH", |
| { &dib0700_usb_id_table[37], NULL }, |
| { NULL }, |
| }, |
| { "YUAN High-Tech STK7700PH", |
| { &dib0700_usb_id_table[38], NULL }, |
| { NULL }, |
| }, |
| { "Asus My Cinema-U3000Hybrid", |
| { &dib0700_usb_id_table[39], NULL }, |
| { NULL }, |
| }, |
| { "YUAN High-Tech MC770", |
| { &dib0700_usb_id_table[48], NULL }, |
| { NULL }, |
| }, |
| { "Leadtek WinFast DTV Dongle H", |
| { &dib0700_usb_id_table[51], NULL }, |
| { NULL }, |
| }, |
| { "YUAN High-Tech STK7700D", |
| { &dib0700_usb_id_table[54], NULL }, |
| { NULL }, |
| }, |
| }, |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .frontend_attach = s5h1411_frontend_attach, |
| .tuner_attach = xc5000_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = sizeof(struct |
| dib0700_adapter_state), |
| }, |
| }, |
| |
| .num_device_descs = 2, |
| .devices = { |
| { "Pinnacle PCTV HD Pro USB Stick", |
| { &dib0700_usb_id_table[40], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle PCTV HD USB Stick", |
| { &dib0700_usb_id_table[41], NULL }, |
| { NULL }, |
| }, |
| }, |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .frontend_attach = lgdt3305_frontend_attach, |
| .tuner_attach = mxl5007t_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = sizeof(struct |
| dib0700_adapter_state), |
| }, |
| }, |
| |
| .num_device_descs = 2, |
| .devices = { |
| { "Hauppauge ATSC MiniCard (B200)", |
| { &dib0700_usb_id_table[46], NULL }, |
| { NULL }, |
| }, |
| { "Hauppauge ATSC MiniCard (B210)", |
| { &dib0700_usb_id_table[47], NULL }, |
| { NULL }, |
| }, |
| }, |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk70x0p_pid_filter, |
| .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, |
| .frontend_attach = stk7070p_frontend_attach, |
| .tuner_attach = dib7770p_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = |
| sizeof(struct dib0700_adapter_state), |
| }, |
| }, |
| |
| .num_device_descs = 2, |
| .devices = { |
| { "DiBcom STK7770P reference design", |
| { &dib0700_usb_id_table[59], NULL }, |
| { NULL }, |
| }, |
| { "Terratec Cinergy T USB XXS (HD)/ T3", |
| { &dib0700_usb_id_table[33], |
| &dib0700_usb_id_table[52], |
| &dib0700_usb_id_table[60], NULL}, |
| { NULL }, |
| }, |
| }, |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk80xx_pid_filter, |
| .pid_filter_ctrl = stk80xx_pid_filter_ctrl, |
| .frontend_attach = stk807x_frontend_attach, |
| .tuner_attach = dib807x_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = |
| sizeof(struct dib0700_adapter_state), |
| }, |
| }, |
| |
| .num_device_descs = 3, |
| .devices = { |
| { "DiBcom STK807xP reference design", |
| { &dib0700_usb_id_table[62], NULL }, |
| { NULL }, |
| }, |
| { "Prolink Pixelview SBTVD", |
| { &dib0700_usb_id_table[63], NULL }, |
| { NULL }, |
| }, |
| { "EvolutePC TVWay+", |
| { &dib0700_usb_id_table[64], NULL }, |
| { NULL }, |
| }, |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| .num_adapters = 2, |
| .adapter = { |
| { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk80xx_pid_filter, |
| .pid_filter_ctrl = stk80xx_pid_filter_ctrl, |
| .frontend_attach = stk807xpvr_frontend_attach0, |
| .tuner_attach = dib807x_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = |
| sizeof(struct dib0700_adapter_state), |
| }, |
| { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk80xx_pid_filter, |
| .pid_filter_ctrl = stk80xx_pid_filter_ctrl, |
| .frontend_attach = stk807xpvr_frontend_attach1, |
| .tuner_attach = dib807x_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x03), |
| |
| .size_of_priv = |
| sizeof(struct dib0700_adapter_state), |
| }, |
| }, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DiBcom STK807xPVR reference design", |
| { &dib0700_usb_id_table[61], NULL }, |
| { NULL }, |
| }, |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | |
| DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 32, |
| .pid_filter = stk80xx_pid_filter, |
| .pid_filter_ctrl = stk80xx_pid_filter_ctrl, |
| .frontend_attach = stk809x_frontend_attach, |
| .tuner_attach = dib809x_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = |
| sizeof(struct dib0700_adapter_state), |
| }, |
| }, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DiBcom STK8096GP reference design", |
| { &dib0700_usb_id_table[67], NULL }, |
| { NULL }, |
| }, |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, |
| }; |
| |
| int dib0700_device_count = ARRAY_SIZE(dib0700_devices); |