| /* |
| * pseries CPU Hotplug infrastructure. |
| * |
| * Split out from arch/powerpc/platforms/pseries/setup.c |
| * arch/powerpc/kernel/rtas.c, and arch/powerpc/platforms/pseries/smp.c |
| * |
| * Peter Bergner, IBM March 2001. |
| * Copyright (C) 2001 IBM. |
| * Dave Engebretsen, Peter Bergner, and |
| * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com |
| * Plus various changes from other IBM teams... |
| * |
| * Copyright (C) 2006 Michael Ellerman, IBM Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/cpu.h> |
| #include <asm/system.h> |
| #include <asm/prom.h> |
| #include <asm/rtas.h> |
| #include <asm/firmware.h> |
| #include <asm/machdep.h> |
| #include <asm/vdso_datapage.h> |
| #include <asm/pSeries_reconfig.h> |
| #include "xics.h" |
| |
| /* This version can't take the spinlock, because it never returns */ |
| static struct rtas_args rtas_stop_self_args = { |
| .token = RTAS_UNKNOWN_SERVICE, |
| .nargs = 0, |
| .nret = 1, |
| .rets = &rtas_stop_self_args.args[0], |
| }; |
| |
| static void rtas_stop_self(void) |
| { |
| struct rtas_args *args = &rtas_stop_self_args; |
| |
| local_irq_disable(); |
| |
| BUG_ON(args->token == RTAS_UNKNOWN_SERVICE); |
| |
| printk("cpu %u (hwid %u) Ready to die...\n", |
| smp_processor_id(), hard_smp_processor_id()); |
| enter_rtas(__pa(args)); |
| |
| panic("Alas, I survived.\n"); |
| } |
| |
| static void pseries_mach_cpu_die(void) |
| { |
| local_irq_disable(); |
| idle_task_exit(); |
| xics_teardown_cpu(0); |
| rtas_stop_self(); |
| /* Should never get here... */ |
| BUG(); |
| for(;;); |
| } |
| |
| static int qcss_tok; /* query-cpu-stopped-state token */ |
| |
| /* Get state of physical CPU. |
| * Return codes: |
| * 0 - The processor is in the RTAS stopped state |
| * 1 - stop-self is in progress |
| * 2 - The processor is not in the RTAS stopped state |
| * -1 - Hardware Error |
| * -2 - Hardware Busy, Try again later. |
| */ |
| static int query_cpu_stopped(unsigned int pcpu) |
| { |
| int cpu_status, status; |
| |
| status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu); |
| if (status != 0) { |
| printk(KERN_ERR |
| "RTAS query-cpu-stopped-state failed: %i\n", status); |
| return status; |
| } |
| |
| return cpu_status; |
| } |
| |
| static int pseries_cpu_disable(void) |
| { |
| int cpu = smp_processor_id(); |
| |
| cpu_clear(cpu, cpu_online_map); |
| vdso_data->processorCount--; |
| |
| /*fix boot_cpuid here*/ |
| if (cpu == boot_cpuid) |
| boot_cpuid = any_online_cpu(cpu_online_map); |
| |
| /* FIXME: abstract this to not be platform specific later on */ |
| xics_migrate_irqs_away(); |
| return 0; |
| } |
| |
| static void pseries_cpu_die(unsigned int cpu) |
| { |
| int tries; |
| int cpu_status; |
| unsigned int pcpu = get_hard_smp_processor_id(cpu); |
| |
| for (tries = 0; tries < 25; tries++) { |
| cpu_status = query_cpu_stopped(pcpu); |
| if (cpu_status == 0 || cpu_status == -1) |
| break; |
| msleep(200); |
| } |
| if (cpu_status != 0) { |
| printk("Querying DEAD? cpu %i (%i) shows %i\n", |
| cpu, pcpu, cpu_status); |
| } |
| |
| /* Isolation and deallocation are definatly done by |
| * drslot_chrp_cpu. If they were not they would be |
| * done here. Change isolate state to Isolate and |
| * change allocation-state to Unusable. |
| */ |
| paca[cpu].cpu_start = 0; |
| } |
| |
| /* |
| * Update cpu_present_map and paca(s) for a new cpu node. The wrinkle |
| * here is that a cpu device node may represent up to two logical cpus |
| * in the SMT case. We must honor the assumption in other code that |
| * the logical ids for sibling SMT threads x and y are adjacent, such |
| * that x^1 == y and y^1 == x. |
| */ |
| static int pseries_add_processor(struct device_node *np) |
| { |
| unsigned int cpu; |
| cpumask_t candidate_map, tmp = CPU_MASK_NONE; |
| int err = -ENOSPC, len, nthreads, i; |
| const u32 *intserv; |
| |
| intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &len); |
| if (!intserv) |
| return 0; |
| |
| nthreads = len / sizeof(u32); |
| for (i = 0; i < nthreads; i++) |
| cpu_set(i, tmp); |
| |
| lock_cpu_hotplug(); |
| |
| BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map)); |
| |
| /* Get a bitmap of unoccupied slots. */ |
| cpus_xor(candidate_map, cpu_possible_map, cpu_present_map); |
| if (cpus_empty(candidate_map)) { |
| /* If we get here, it most likely means that NR_CPUS is |
| * less than the partition's max processors setting. |
| */ |
| printk(KERN_ERR "Cannot add cpu %s; this system configuration" |
| " supports %d logical cpus.\n", np->full_name, |
| cpus_weight(cpu_possible_map)); |
| goto out_unlock; |
| } |
| |
| while (!cpus_empty(tmp)) |
| if (cpus_subset(tmp, candidate_map)) |
| /* Found a range where we can insert the new cpu(s) */ |
| break; |
| else |
| cpus_shift_left(tmp, tmp, nthreads); |
| |
| if (cpus_empty(tmp)) { |
| printk(KERN_ERR "Unable to find space in cpu_present_map for" |
| " processor %s with %d thread(s)\n", np->name, |
| nthreads); |
| goto out_unlock; |
| } |
| |
| for_each_cpu_mask(cpu, tmp) { |
| BUG_ON(cpu_isset(cpu, cpu_present_map)); |
| cpu_set(cpu, cpu_present_map); |
| set_hard_smp_processor_id(cpu, *intserv++); |
| } |
| err = 0; |
| out_unlock: |
| unlock_cpu_hotplug(); |
| return err; |
| } |
| |
| /* |
| * Update the present map for a cpu node which is going away, and set |
| * the hard id in the paca(s) to -1 to be consistent with boot time |
| * convention for non-present cpus. |
| */ |
| static void pseries_remove_processor(struct device_node *np) |
| { |
| unsigned int cpu; |
| int len, nthreads, i; |
| const u32 *intserv; |
| |
| intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &len); |
| if (!intserv) |
| return; |
| |
| nthreads = len / sizeof(u32); |
| |
| lock_cpu_hotplug(); |
| for (i = 0; i < nthreads; i++) { |
| for_each_present_cpu(cpu) { |
| if (get_hard_smp_processor_id(cpu) != intserv[i]) |
| continue; |
| BUG_ON(cpu_online(cpu)); |
| cpu_clear(cpu, cpu_present_map); |
| set_hard_smp_processor_id(cpu, -1); |
| break; |
| } |
| if (cpu == NR_CPUS) |
| printk(KERN_WARNING "Could not find cpu to remove " |
| "with physical id 0x%x\n", intserv[i]); |
| } |
| unlock_cpu_hotplug(); |
| } |
| |
| static int pseries_smp_notifier(struct notifier_block *nb, |
| unsigned long action, void *node) |
| { |
| int err = NOTIFY_OK; |
| |
| switch (action) { |
| case PSERIES_RECONFIG_ADD: |
| if (pseries_add_processor(node)) |
| err = NOTIFY_BAD; |
| break; |
| case PSERIES_RECONFIG_REMOVE: |
| pseries_remove_processor(node); |
| break; |
| default: |
| err = NOTIFY_DONE; |
| break; |
| } |
| return err; |
| } |
| |
| static struct notifier_block pseries_smp_nb = { |
| .notifier_call = pseries_smp_notifier, |
| }; |
| |
| static int __init pseries_cpu_hotplug_init(void) |
| { |
| struct device_node *np; |
| const char *typep; |
| |
| for_each_node_by_name(np, "interrupt-controller") { |
| typep = of_get_property(np, "compatible", NULL); |
| if (strstr(typep, "open-pic")) { |
| of_node_put(np); |
| |
| printk(KERN_INFO "CPU Hotplug not supported on " |
| "systems using MPIC\n"); |
| return 0; |
| } |
| } |
| |
| rtas_stop_self_args.token = rtas_token("stop-self"); |
| qcss_tok = rtas_token("query-cpu-stopped-state"); |
| |
| if (rtas_stop_self_args.token == RTAS_UNKNOWN_SERVICE || |
| qcss_tok == RTAS_UNKNOWN_SERVICE) { |
| printk(KERN_INFO "CPU Hotplug not supported by firmware " |
| "- disabling.\n"); |
| return 0; |
| } |
| |
| ppc_md.cpu_die = pseries_mach_cpu_die; |
| smp_ops->cpu_disable = pseries_cpu_disable; |
| smp_ops->cpu_die = pseries_cpu_die; |
| |
| /* Processors can be added/removed only on LPAR */ |
| if (firmware_has_feature(FW_FEATURE_LPAR)) |
| pSeries_reconfig_notifier_register(&pseries_smp_nb); |
| |
| return 0; |
| } |
| arch_initcall(pseries_cpu_hotplug_init); |