| /* |
| * |
| * Copyright (c) 2003 Gerd Knorr |
| * Copyright (c) 2003 Pavel Machek |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/input.h> |
| #include <linux/slab.h> |
| |
| #include "bttv.h" |
| #include "bttvp.h" |
| |
| |
| static int ir_debug; |
| module_param(ir_debug, int, 0644); |
| static int repeat_delay = 500; |
| module_param(repeat_delay, int, 0644); |
| static int repeat_period = 33; |
| module_param(repeat_period, int, 0644); |
| |
| static int ir_rc5_remote_gap = 885; |
| module_param(ir_rc5_remote_gap, int, 0644); |
| static int ir_rc5_key_timeout = 200; |
| module_param(ir_rc5_key_timeout, int, 0644); |
| |
| #undef dprintk |
| #define dprintk(arg...) do { \ |
| if (ir_debug >= 1) \ |
| printk(arg); \ |
| } while (0) |
| |
| #define DEVNAME "bttv-input" |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static void ir_handle_key(struct bttv *btv) |
| { |
| struct card_ir *ir = btv->remote; |
| u32 gpio,data; |
| |
| /* read gpio value */ |
| gpio = bttv_gpio_read(&btv->c); |
| if (ir->polling) { |
| if (ir->last_gpio == gpio) |
| return; |
| ir->last_gpio = gpio; |
| } |
| |
| /* extract data */ |
| data = ir_extract_bits(gpio, ir->mask_keycode); |
| dprintk(KERN_INFO DEVNAME ": irq gpio=0x%x code=%d | %s%s%s\n", |
| gpio, data, |
| ir->polling ? "poll" : "irq", |
| (gpio & ir->mask_keydown) ? " down" : "", |
| (gpio & ir->mask_keyup) ? " up" : ""); |
| |
| if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) || |
| (ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) { |
| ir_input_keydown(ir->dev, &ir->ir, data); |
| } else { |
| /* HACK: Probably, ir->mask_keydown is missing |
| for this board */ |
| if (btv->c.type == BTTV_BOARD_WINFAST2000) |
| ir_input_keydown(ir->dev, &ir->ir, data); |
| |
| ir_input_nokey(ir->dev,&ir->ir); |
| } |
| |
| } |
| |
| static void ir_enltv_handle_key(struct bttv *btv) |
| { |
| struct card_ir *ir = btv->remote; |
| u32 gpio, data, keyup; |
| |
| /* read gpio value */ |
| gpio = bttv_gpio_read(&btv->c); |
| |
| /* extract data */ |
| data = ir_extract_bits(gpio, ir->mask_keycode); |
| |
| /* Check if it is keyup */ |
| keyup = (gpio & ir->mask_keyup) ? 1 << 31 : 0; |
| |
| if ((ir->last_gpio & 0x7f) != data) { |
| dprintk(KERN_INFO DEVNAME ": gpio=0x%x code=%d | %s\n", |
| gpio, data, |
| (gpio & ir->mask_keyup) ? " up" : "up/down"); |
| |
| ir_input_keydown(ir->dev, &ir->ir, data); |
| if (keyup) |
| ir_input_nokey(ir->dev, &ir->ir); |
| } else { |
| if ((ir->last_gpio & 1 << 31) == keyup) |
| return; |
| |
| dprintk(KERN_INFO DEVNAME ":(cnt) gpio=0x%x code=%d | %s\n", |
| gpio, data, |
| (gpio & ir->mask_keyup) ? " up" : "down"); |
| |
| if (keyup) |
| ir_input_nokey(ir->dev, &ir->ir); |
| else |
| ir_input_keydown(ir->dev, &ir->ir, data); |
| } |
| |
| ir->last_gpio = data | keyup; |
| } |
| |
| void bttv_input_irq(struct bttv *btv) |
| { |
| struct card_ir *ir = btv->remote; |
| |
| if (!ir->polling) |
| ir_handle_key(btv); |
| } |
| |
| static void bttv_input_timer(unsigned long data) |
| { |
| struct bttv *btv = (struct bttv*)data; |
| struct card_ir *ir = btv->remote; |
| |
| if (btv->c.type == BTTV_BOARD_ENLTV_FM_2) |
| ir_enltv_handle_key(btv); |
| else |
| ir_handle_key(btv); |
| mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling)); |
| } |
| |
| /* ---------------------------------------------------------------*/ |
| |
| static int bttv_rc5_irq(struct bttv *btv) |
| { |
| struct card_ir *ir = btv->remote; |
| struct timeval tv; |
| u32 gpio; |
| u32 gap; |
| unsigned long current_jiffies; |
| |
| /* read gpio port */ |
| gpio = bttv_gpio_read(&btv->c); |
| |
| /* remote IRQ? */ |
| if (!(gpio & 0x20)) |
| return 0; |
| |
| /* get time of bit */ |
| current_jiffies = jiffies; |
| do_gettimeofday(&tv); |
| |
| /* avoid overflow with gap >1s */ |
| if (tv.tv_sec - ir->base_time.tv_sec > 1) { |
| gap = 200000; |
| } else { |
| gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) + |
| tv.tv_usec - ir->base_time.tv_usec; |
| } |
| |
| /* active code => add bit */ |
| if (ir->active) { |
| /* only if in the code (otherwise spurious IRQ or timer |
| late) */ |
| if (ir->last_bit < 28) { |
| ir->last_bit = (gap - ir_rc5_remote_gap / 2) / |
| ir_rc5_remote_gap; |
| ir->code |= 1 << ir->last_bit; |
| } |
| /* starting new code */ |
| } else { |
| ir->active = 1; |
| ir->code = 0; |
| ir->base_time = tv; |
| ir->last_bit = 0; |
| |
| mod_timer(&ir->timer_end, |
| current_jiffies + msecs_to_jiffies(30)); |
| } |
| |
| /* toggle GPIO pin 4 to reset the irq */ |
| bttv_gpio_write(&btv->c, gpio & ~(1 << 4)); |
| bttv_gpio_write(&btv->c, gpio | (1 << 4)); |
| return 1; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static void bttv_ir_start(struct bttv *btv, struct card_ir *ir) |
| { |
| if (ir->polling) { |
| setup_timer(&ir->timer, bttv_input_timer, (unsigned long)btv); |
| ir->timer.expires = jiffies + msecs_to_jiffies(1000); |
| add_timer(&ir->timer); |
| } else if (ir->rc5_gpio) { |
| /* set timer_end for code completion */ |
| init_timer(&ir->timer_end); |
| ir->timer_end.function = ir_rc5_timer_end; |
| ir->timer_end.data = (unsigned long)ir; |
| |
| init_timer(&ir->timer_keyup); |
| ir->timer_keyup.function = ir_rc5_timer_keyup; |
| ir->timer_keyup.data = (unsigned long)ir; |
| ir->shift_by = 1; |
| ir->start = 3; |
| ir->addr = 0x0; |
| ir->rc5_key_timeout = ir_rc5_key_timeout; |
| ir->rc5_remote_gap = ir_rc5_remote_gap; |
| } |
| } |
| |
| static void bttv_ir_stop(struct bttv *btv) |
| { |
| if (btv->remote->polling) { |
| del_timer_sync(&btv->remote->timer); |
| flush_scheduled_work(); |
| } |
| |
| if (btv->remote->rc5_gpio) { |
| u32 gpio; |
| |
| del_timer_sync(&btv->remote->timer_end); |
| flush_scheduled_work(); |
| |
| gpio = bttv_gpio_read(&btv->c); |
| bttv_gpio_write(&btv->c, gpio & ~(1 << 4)); |
| } |
| } |
| |
| int bttv_input_init(struct bttv *btv) |
| { |
| struct card_ir *ir; |
| struct ir_scancode_table *ir_codes = NULL; |
| struct input_dev *input_dev; |
| u64 ir_type = IR_TYPE_OTHER; |
| int err = -ENOMEM; |
| |
| if (!btv->has_remote) |
| return -ENODEV; |
| |
| ir = kzalloc(sizeof(*ir),GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!ir || !input_dev) |
| goto err_out_free; |
| |
| /* detect & configure */ |
| switch (btv->c.type) { |
| case BTTV_BOARD_AVERMEDIA: |
| case BTTV_BOARD_AVPHONE98: |
| case BTTV_BOARD_AVERMEDIA98: |
| ir_codes = &ir_codes_avermedia_table; |
| ir->mask_keycode = 0xf88000; |
| ir->mask_keydown = 0x010000; |
| ir->polling = 50; // ms |
| break; |
| |
| case BTTV_BOARD_AVDVBT_761: |
| case BTTV_BOARD_AVDVBT_771: |
| ir_codes = &ir_codes_avermedia_dvbt_table; |
| ir->mask_keycode = 0x0f00c0; |
| ir->mask_keydown = 0x000020; |
| ir->polling = 50; // ms |
| break; |
| |
| case BTTV_BOARD_PXELVWPLTVPAK: |
| ir_codes = &ir_codes_pixelview_table; |
| ir->mask_keycode = 0x003e00; |
| ir->mask_keyup = 0x010000; |
| ir->polling = 50; // ms |
| break; |
| case BTTV_BOARD_PV_M4900: |
| case BTTV_BOARD_PV_BT878P_9B: |
| case BTTV_BOARD_PV_BT878P_PLUS: |
| ir_codes = &ir_codes_pixelview_table; |
| ir->mask_keycode = 0x001f00; |
| ir->mask_keyup = 0x008000; |
| ir->polling = 50; // ms |
| break; |
| |
| case BTTV_BOARD_WINFAST2000: |
| ir_codes = &ir_codes_winfast_table; |
| ir->mask_keycode = 0x1f8; |
| break; |
| case BTTV_BOARD_MAGICTVIEW061: |
| case BTTV_BOARD_MAGICTVIEW063: |
| ir_codes = &ir_codes_winfast_table; |
| ir->mask_keycode = 0x0008e000; |
| ir->mask_keydown = 0x00200000; |
| break; |
| case BTTV_BOARD_APAC_VIEWCOMP: |
| ir_codes = &ir_codes_apac_viewcomp_table; |
| ir->mask_keycode = 0x001f00; |
| ir->mask_keyup = 0x008000; |
| ir->polling = 50; // ms |
| break; |
| case BTTV_BOARD_ASKEY_CPH03X: |
| case BTTV_BOARD_CONCEPTRONIC_CTVFMI2: |
| case BTTV_BOARD_CONTVFMI: |
| ir_codes = &ir_codes_pixelview_table; |
| ir->mask_keycode = 0x001F00; |
| ir->mask_keyup = 0x006000; |
| ir->polling = 50; // ms |
| break; |
| case BTTV_BOARD_NEBULA_DIGITV: |
| ir_codes = &ir_codes_nebula_table; |
| btv->custom_irq = bttv_rc5_irq; |
| ir->rc5_gpio = 1; |
| break; |
| case BTTV_BOARD_MACHTV_MAGICTV: |
| ir_codes = &ir_codes_apac_viewcomp_table; |
| ir->mask_keycode = 0x001F00; |
| ir->mask_keyup = 0x004000; |
| ir->polling = 50; /* ms */ |
| break; |
| case BTTV_BOARD_KOZUMI_KTV_01C: |
| ir_codes = &ir_codes_pctv_sedna_table; |
| ir->mask_keycode = 0x001f00; |
| ir->mask_keyup = 0x006000; |
| ir->polling = 50; /* ms */ |
| break; |
| case BTTV_BOARD_ENLTV_FM_2: |
| ir_codes = &ir_codes_encore_enltv2_table; |
| ir->mask_keycode = 0x00fd00; |
| ir->mask_keyup = 0x000080; |
| ir->polling = 1; /* ms */ |
| ir->last_gpio = ir_extract_bits(bttv_gpio_read(&btv->c), |
| ir->mask_keycode); |
| break; |
| } |
| if (NULL == ir_codes) { |
| dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n", btv->c.type); |
| err = -ENODEV; |
| goto err_out_free; |
| } |
| |
| if (ir->rc5_gpio) { |
| u32 gpio; |
| /* enable remote irq */ |
| bttv_gpio_inout(&btv->c, (1 << 4), 1 << 4); |
| gpio = bttv_gpio_read(&btv->c); |
| bttv_gpio_write(&btv->c, gpio & ~(1 << 4)); |
| bttv_gpio_write(&btv->c, gpio | (1 << 4)); |
| } else { |
| /* init hardware-specific stuff */ |
| bttv_gpio_inout(&btv->c, ir->mask_keycode | ir->mask_keydown, 0); |
| } |
| |
| /* init input device */ |
| ir->dev = input_dev; |
| |
| snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)", |
| btv->c.type); |
| snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", |
| pci_name(btv->c.pci)); |
| |
| err = ir_input_init(input_dev, &ir->ir, ir_type); |
| if (err < 0) |
| goto err_out_free; |
| |
| input_dev->name = ir->name; |
| input_dev->phys = ir->phys; |
| input_dev->id.bustype = BUS_PCI; |
| input_dev->id.version = 1; |
| if (btv->c.pci->subsystem_vendor) { |
| input_dev->id.vendor = btv->c.pci->subsystem_vendor; |
| input_dev->id.product = btv->c.pci->subsystem_device; |
| } else { |
| input_dev->id.vendor = btv->c.pci->vendor; |
| input_dev->id.product = btv->c.pci->device; |
| } |
| input_dev->dev.parent = &btv->c.pci->dev; |
| |
| btv->remote = ir; |
| bttv_ir_start(btv, ir); |
| |
| /* all done */ |
| err = ir_input_register(btv->remote->dev, ir_codes, NULL); |
| if (err) |
| goto err_out_stop; |
| |
| /* the remote isn't as bouncy as a keyboard */ |
| ir->dev->rep[REP_DELAY] = repeat_delay; |
| ir->dev->rep[REP_PERIOD] = repeat_period; |
| |
| return 0; |
| |
| err_out_stop: |
| bttv_ir_stop(btv); |
| btv->remote = NULL; |
| err_out_free: |
| kfree(ir); |
| return err; |
| } |
| |
| void bttv_input_fini(struct bttv *btv) |
| { |
| if (btv->remote == NULL) |
| return; |
| |
| bttv_ir_stop(btv); |
| ir_input_unregister(btv->remote->dev); |
| kfree(btv->remote); |
| btv->remote = NULL; |
| } |
| |
| |
| /* |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |