| /* |
| * linux/arch/m32r/kernel/setup_mappi2.c |
| * |
| * Setup routines for Renesas MAPPI-II(M3A-ZA36) Board |
| * |
| * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, |
| * Hitoshi Yamamoto, Mamoru Sakugawa |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| |
| #include <asm/system.h> |
| #include <asm/m32r.h> |
| #include <asm/io.h> |
| |
| #define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) |
| |
| #ifndef CONFIG_SMP |
| typedef struct { |
| unsigned long icucr; /* ICU Control Register */ |
| } icu_data_t; |
| #endif /* CONFIG_SMP */ |
| |
| icu_data_t icu_data[NR_IRQS]; |
| |
| static void disable_mappi2_irq(unsigned int irq) |
| { |
| unsigned long port, data; |
| |
| if ((irq == 0) ||(irq >= NR_IRQS)) { |
| printk("bad irq 0x%08x\n", irq); |
| return; |
| } |
| port = irq2port(irq); |
| data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; |
| outl(data, port); |
| } |
| |
| static void enable_mappi2_irq(unsigned int irq) |
| { |
| unsigned long port, data; |
| |
| if ((irq == 0) ||(irq >= NR_IRQS)) { |
| printk("bad irq 0x%08x\n", irq); |
| return; |
| } |
| port = irq2port(irq); |
| data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; |
| outl(data, port); |
| } |
| |
| static void mask_and_ack_mappi2(unsigned int irq) |
| { |
| disable_mappi2_irq(irq); |
| } |
| |
| static void end_mappi2_irq(unsigned int irq) |
| { |
| enable_mappi2_irq(irq); |
| } |
| |
| static unsigned int startup_mappi2_irq(unsigned int irq) |
| { |
| enable_mappi2_irq(irq); |
| return (0); |
| } |
| |
| static void shutdown_mappi2_irq(unsigned int irq) |
| { |
| unsigned long port; |
| |
| port = irq2port(irq); |
| outl(M32R_ICUCR_ILEVEL7, port); |
| } |
| |
| static struct hw_interrupt_type mappi2_irq_type = |
| { |
| .typename = "MAPPI2-IRQ", |
| .startup = startup_mappi2_irq, |
| .shutdown = shutdown_mappi2_irq, |
| .enable = enable_mappi2_irq, |
| .disable = disable_mappi2_irq, |
| .ack = mask_and_ack_mappi2, |
| .end = end_mappi2_irq |
| }; |
| |
| void __init init_IRQ(void) |
| { |
| #if defined(CONFIG_SMC91X) |
| /* INT0 : LAN controller (SMC91111) */ |
| irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_INT0].handler = &mappi2_irq_type; |
| irq_desc[M32R_IRQ_INT0].action = 0; |
| irq_desc[M32R_IRQ_INT0].depth = 1; |
| icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; |
| disable_mappi2_irq(M32R_IRQ_INT0); |
| #endif /* CONFIG_SMC91X */ |
| |
| /* MFT2 : system timer */ |
| irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_MFT2].handler = &mappi2_irq_type; |
| irq_desc[M32R_IRQ_MFT2].action = 0; |
| irq_desc[M32R_IRQ_MFT2].depth = 1; |
| icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; |
| disable_mappi2_irq(M32R_IRQ_MFT2); |
| |
| #ifdef CONFIG_SERIAL_M32R_SIO |
| /* SIO0_R : uart receive data */ |
| irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_SIO0_R].handler = &mappi2_irq_type; |
| irq_desc[M32R_IRQ_SIO0_R].action = 0; |
| irq_desc[M32R_IRQ_SIO0_R].depth = 1; |
| icu_data[M32R_IRQ_SIO0_R].icucr = 0; |
| disable_mappi2_irq(M32R_IRQ_SIO0_R); |
| |
| /* SIO0_S : uart send data */ |
| irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_SIO0_S].handler = &mappi2_irq_type; |
| irq_desc[M32R_IRQ_SIO0_S].action = 0; |
| irq_desc[M32R_IRQ_SIO0_S].depth = 1; |
| icu_data[M32R_IRQ_SIO0_S].icucr = 0; |
| disable_mappi2_irq(M32R_IRQ_SIO0_S); |
| /* SIO1_R : uart receive data */ |
| irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_SIO1_R].handler = &mappi2_irq_type; |
| irq_desc[M32R_IRQ_SIO1_R].action = 0; |
| irq_desc[M32R_IRQ_SIO1_R].depth = 1; |
| icu_data[M32R_IRQ_SIO1_R].icucr = 0; |
| disable_mappi2_irq(M32R_IRQ_SIO1_R); |
| |
| /* SIO1_S : uart send data */ |
| irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_SIO1_S].handler = &mappi2_irq_type; |
| irq_desc[M32R_IRQ_SIO1_S].action = 0; |
| irq_desc[M32R_IRQ_SIO1_S].depth = 1; |
| icu_data[M32R_IRQ_SIO1_S].icucr = 0; |
| disable_mappi2_irq(M32R_IRQ_SIO1_S); |
| #endif /* CONFIG_M32R_USE_DBG_CONSOLE */ |
| |
| #if defined(CONFIG_USB) |
| /* INT1 : USB Host controller interrupt */ |
| irq_desc[M32R_IRQ_INT1].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_INT1].handler = &mappi2_irq_type; |
| irq_desc[M32R_IRQ_INT1].action = 0; |
| irq_desc[M32R_IRQ_INT1].depth = 1; |
| icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01; |
| disable_mappi2_irq(M32R_IRQ_INT1); |
| #endif /* CONFIG_USB */ |
| |
| /* ICUCR40: CFC IREQ */ |
| irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED; |
| irq_desc[PLD_IRQ_CFIREQ].handler = &mappi2_irq_type; |
| irq_desc[PLD_IRQ_CFIREQ].action = 0; |
| irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */ |
| icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; |
| disable_mappi2_irq(PLD_IRQ_CFIREQ); |
| |
| #if defined(CONFIG_M32R_CFC) |
| /* ICUCR41: CFC Insert */ |
| irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED; |
| irq_desc[PLD_IRQ_CFC_INSERT].handler = &mappi2_irq_type; |
| irq_desc[PLD_IRQ_CFC_INSERT].action = 0; |
| irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */ |
| icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; |
| disable_mappi2_irq(PLD_IRQ_CFC_INSERT); |
| |
| /* ICUCR42: CFC Eject */ |
| irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED; |
| irq_desc[PLD_IRQ_CFC_EJECT].handler = &mappi2_irq_type; |
| irq_desc[PLD_IRQ_CFC_EJECT].action = 0; |
| irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */ |
| icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; |
| disable_mappi2_irq(PLD_IRQ_CFC_EJECT); |
| #endif /* CONFIG_MAPPI2_CFC */ |
| } |
| |
| #define LAN_IOSTART 0x300 |
| #define LAN_IOEND 0x320 |
| static struct resource smc91x_resources[] = { |
| [0] = { |
| .start = (LAN_IOSTART), |
| .end = (LAN_IOEND), |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = M32R_IRQ_INT0, |
| .end = M32R_IRQ_INT0, |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| static struct platform_device smc91x_device = { |
| .name = "smc91x", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(smc91x_resources), |
| .resource = smc91x_resources, |
| }; |
| |
| static int __init platform_init(void) |
| { |
| platform_device_register(&smc91x_device); |
| return 0; |
| } |
| arch_initcall(platform_init); |