| /* |
| * File: msi.c |
| * Purpose: PCI Message Signaled Interrupt (MSI) |
| * |
| * Copyright (C) 2003-2004 Intel |
| * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/mm.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/pci.h> |
| #include <linux/proc_fs.h> |
| #include <linux/msi.h> |
| #include <linux/smp.h> |
| |
| #include <asm/errno.h> |
| #include <asm/io.h> |
| |
| #include "pci.h" |
| #include "msi.h" |
| |
| static int pci_msi_enable = 1; |
| |
| /* Arch hooks */ |
| |
| #ifndef arch_msi_check_device |
| int arch_msi_check_device(struct pci_dev *dev, int nvec, int type) |
| { |
| return 0; |
| } |
| #endif |
| |
| #ifndef arch_setup_msi_irqs |
| int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) |
| { |
| struct msi_desc *entry; |
| int ret; |
| |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| ret = arch_setup_msi_irq(dev, entry); |
| if (ret < 0) |
| return ret; |
| if (ret > 0) |
| return -ENOSPC; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| #ifndef arch_teardown_msi_irqs |
| void arch_teardown_msi_irqs(struct pci_dev *dev) |
| { |
| struct msi_desc *entry; |
| |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| if (entry->irq != 0) |
| arch_teardown_msi_irq(entry->irq); |
| } |
| } |
| #endif |
| |
| static void __msi_set_enable(struct pci_dev *dev, int pos, int enable) |
| { |
| u16 control; |
| |
| if (pos) { |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); |
| control &= ~PCI_MSI_FLAGS_ENABLE; |
| if (enable) |
| control |= PCI_MSI_FLAGS_ENABLE; |
| pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); |
| } |
| } |
| |
| static void msi_set_enable(struct pci_dev *dev, int enable) |
| { |
| __msi_set_enable(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), enable); |
| } |
| |
| static void msix_set_enable(struct pci_dev *dev, int enable) |
| { |
| int pos; |
| u16 control; |
| |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); |
| if (pos) { |
| pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); |
| control &= ~PCI_MSIX_FLAGS_ENABLE; |
| if (enable) |
| control |= PCI_MSIX_FLAGS_ENABLE; |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); |
| } |
| } |
| |
| static inline __attribute_const__ u32 msi_mask(unsigned x) |
| { |
| /* Don't shift by >= width of type */ |
| if (x >= 5) |
| return 0xffffffff; |
| return (1 << (1 << x)) - 1; |
| } |
| |
| static void msix_flush_writes(struct irq_desc *desc) |
| { |
| struct msi_desc *entry; |
| |
| entry = get_irq_desc_msi(desc); |
| BUG_ON(!entry || !entry->dev); |
| switch (entry->msi_attrib.type) { |
| case PCI_CAP_ID_MSI: |
| /* nothing to do */ |
| break; |
| case PCI_CAP_ID_MSIX: |
| { |
| int offset = entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + |
| PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET; |
| readl(entry->mask_base + offset); |
| break; |
| } |
| default: |
| BUG(); |
| break; |
| } |
| } |
| |
| /* |
| * PCI 2.3 does not specify mask bits for each MSI interrupt. Attempting to |
| * mask all MSI interrupts by clearing the MSI enable bit does not work |
| * reliably as devices without an INTx disable bit will then generate a |
| * level IRQ which will never be cleared. |
| * |
| * Returns 1 if it succeeded in masking the interrupt and 0 if the device |
| * doesn't support MSI masking. |
| */ |
| static int msi_set_mask_bits(struct irq_desc *desc, u32 mask, u32 flag) |
| { |
| struct msi_desc *entry; |
| |
| entry = get_irq_desc_msi(desc); |
| BUG_ON(!entry || !entry->dev); |
| switch (entry->msi_attrib.type) { |
| case PCI_CAP_ID_MSI: |
| if (entry->msi_attrib.maskbit) { |
| int pos; |
| u32 mask_bits; |
| |
| pos = (long)entry->mask_base; |
| pci_read_config_dword(entry->dev, pos, &mask_bits); |
| mask_bits &= ~(mask); |
| mask_bits |= flag & mask; |
| pci_write_config_dword(entry->dev, pos, mask_bits); |
| } else { |
| return 0; |
| } |
| break; |
| case PCI_CAP_ID_MSIX: |
| { |
| int offset = entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + |
| PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET; |
| writel(flag, entry->mask_base + offset); |
| readl(entry->mask_base + offset); |
| break; |
| } |
| default: |
| BUG(); |
| break; |
| } |
| entry->msi_attrib.masked = !!flag; |
| return 1; |
| } |
| |
| void read_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg) |
| { |
| struct msi_desc *entry = get_irq_desc_msi(desc); |
| switch(entry->msi_attrib.type) { |
| case PCI_CAP_ID_MSI: |
| { |
| struct pci_dev *dev = entry->dev; |
| int pos = entry->msi_attrib.pos; |
| u16 data; |
| |
| pci_read_config_dword(dev, msi_lower_address_reg(pos), |
| &msg->address_lo); |
| if (entry->msi_attrib.is_64) { |
| pci_read_config_dword(dev, msi_upper_address_reg(pos), |
| &msg->address_hi); |
| pci_read_config_word(dev, msi_data_reg(pos, 1), &data); |
| } else { |
| msg->address_hi = 0; |
| pci_read_config_word(dev, msi_data_reg(pos, 0), &data); |
| } |
| msg->data = data; |
| break; |
| } |
| case PCI_CAP_ID_MSIX: |
| { |
| void __iomem *base; |
| base = entry->mask_base + |
| entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; |
| |
| msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET); |
| msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET); |
| msg->data = readl(base + PCI_MSIX_ENTRY_DATA_OFFSET); |
| break; |
| } |
| default: |
| BUG(); |
| } |
| } |
| |
| void read_msi_msg(unsigned int irq, struct msi_msg *msg) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| |
| read_msi_msg_desc(desc, msg); |
| } |
| |
| void write_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg) |
| { |
| struct msi_desc *entry = get_irq_desc_msi(desc); |
| switch (entry->msi_attrib.type) { |
| case PCI_CAP_ID_MSI: |
| { |
| struct pci_dev *dev = entry->dev; |
| int pos = entry->msi_attrib.pos; |
| |
| pci_write_config_dword(dev, msi_lower_address_reg(pos), |
| msg->address_lo); |
| if (entry->msi_attrib.is_64) { |
| pci_write_config_dword(dev, msi_upper_address_reg(pos), |
| msg->address_hi); |
| pci_write_config_word(dev, msi_data_reg(pos, 1), |
| msg->data); |
| } else { |
| pci_write_config_word(dev, msi_data_reg(pos, 0), |
| msg->data); |
| } |
| break; |
| } |
| case PCI_CAP_ID_MSIX: |
| { |
| void __iomem *base; |
| base = entry->mask_base + |
| entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; |
| |
| writel(msg->address_lo, |
| base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET); |
| writel(msg->address_hi, |
| base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET); |
| writel(msg->data, base + PCI_MSIX_ENTRY_DATA_OFFSET); |
| break; |
| } |
| default: |
| BUG(); |
| } |
| entry->msg = *msg; |
| } |
| |
| void write_msi_msg(unsigned int irq, struct msi_msg *msg) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| |
| write_msi_msg_desc(desc, msg); |
| } |
| |
| void mask_msi_irq(unsigned int irq) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| |
| msi_set_mask_bits(desc, 1, 1); |
| msix_flush_writes(desc); |
| } |
| |
| void unmask_msi_irq(unsigned int irq) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| |
| msi_set_mask_bits(desc, 1, 0); |
| msix_flush_writes(desc); |
| } |
| |
| static int msi_free_irqs(struct pci_dev* dev); |
| |
| static struct msi_desc* alloc_msi_entry(void) |
| { |
| struct msi_desc *entry; |
| |
| entry = kzalloc(sizeof(struct msi_desc), GFP_KERNEL); |
| if (!entry) |
| return NULL; |
| |
| INIT_LIST_HEAD(&entry->list); |
| entry->irq = 0; |
| entry->dev = NULL; |
| |
| return entry; |
| } |
| |
| static void pci_intx_for_msi(struct pci_dev *dev, int enable) |
| { |
| if (!(dev->dev_flags & PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG)) |
| pci_intx(dev, enable); |
| } |
| |
| static void __pci_restore_msi_state(struct pci_dev *dev) |
| { |
| int pos; |
| u16 control; |
| struct msi_desc *entry; |
| |
| if (!dev->msi_enabled) |
| return; |
| |
| entry = get_irq_msi(dev->irq); |
| pos = entry->msi_attrib.pos; |
| |
| pci_intx_for_msi(dev, 0); |
| msi_set_enable(dev, 0); |
| write_msi_msg(dev->irq, &entry->msg); |
| if (entry->msi_attrib.maskbit) { |
| struct irq_desc *desc = irq_to_desc(dev->irq); |
| msi_set_mask_bits(desc, entry->msi_attrib.maskbits_mask, |
| entry->msi_attrib.masked); |
| } |
| |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); |
| control &= ~PCI_MSI_FLAGS_QSIZE; |
| control |= PCI_MSI_FLAGS_ENABLE; |
| pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); |
| } |
| |
| static void __pci_restore_msix_state(struct pci_dev *dev) |
| { |
| int pos; |
| struct msi_desc *entry; |
| u16 control; |
| |
| if (!dev->msix_enabled) |
| return; |
| |
| /* route the table */ |
| pci_intx_for_msi(dev, 0); |
| msix_set_enable(dev, 0); |
| |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| struct irq_desc *desc = irq_to_desc(entry->irq); |
| write_msi_msg(entry->irq, &entry->msg); |
| msi_set_mask_bits(desc, 1, entry->msi_attrib.masked); |
| } |
| |
| BUG_ON(list_empty(&dev->msi_list)); |
| entry = list_entry(dev->msi_list.next, struct msi_desc, list); |
| pos = entry->msi_attrib.pos; |
| pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); |
| control &= ~PCI_MSIX_FLAGS_MASKALL; |
| control |= PCI_MSIX_FLAGS_ENABLE; |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); |
| } |
| |
| void pci_restore_msi_state(struct pci_dev *dev) |
| { |
| __pci_restore_msi_state(dev); |
| __pci_restore_msix_state(dev); |
| } |
| EXPORT_SYMBOL_GPL(pci_restore_msi_state); |
| |
| /** |
| * msi_capability_init - configure device's MSI capability structure |
| * @dev: pointer to the pci_dev data structure of MSI device function |
| * |
| * Setup the MSI capability structure of device function with a single |
| * MSI irq, regardless of device function is capable of handling |
| * multiple messages. A return of zero indicates the successful setup |
| * of an entry zero with the new MSI irq or non-zero for otherwise. |
| **/ |
| static int msi_capability_init(struct pci_dev *dev) |
| { |
| struct msi_desc *entry; |
| int pos, ret; |
| u16 control; |
| |
| msi_set_enable(dev, 0); /* Ensure msi is disabled as I set it up */ |
| |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSI); |
| pci_read_config_word(dev, msi_control_reg(pos), &control); |
| /* MSI Entry Initialization */ |
| entry = alloc_msi_entry(); |
| if (!entry) |
| return -ENOMEM; |
| |
| entry->msi_attrib.type = PCI_CAP_ID_MSI; |
| entry->msi_attrib.is_64 = is_64bit_address(control); |
| entry->msi_attrib.entry_nr = 0; |
| entry->msi_attrib.maskbit = is_mask_bit_support(control); |
| entry->msi_attrib.masked = 1; |
| entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */ |
| entry->msi_attrib.pos = pos; |
| entry->dev = dev; |
| if (entry->msi_attrib.maskbit) { |
| unsigned int base, maskbits, temp; |
| |
| base = msi_mask_bits_reg(pos, entry->msi_attrib.is_64); |
| entry->mask_base = (void __iomem *)(long)base; |
| |
| /* All MSIs are unmasked by default, Mask them all */ |
| pci_read_config_dword(dev, base, &maskbits); |
| temp = msi_mask((control & PCI_MSI_FLAGS_QMASK) >> 1); |
| maskbits |= temp; |
| pci_write_config_dword(dev, base, maskbits); |
| entry->msi_attrib.maskbits_mask = temp; |
| } |
| list_add_tail(&entry->list, &dev->msi_list); |
| |
| /* Configure MSI capability structure */ |
| ret = arch_setup_msi_irqs(dev, 1, PCI_CAP_ID_MSI); |
| if (ret) { |
| msi_free_irqs(dev); |
| return ret; |
| } |
| |
| /* Set MSI enabled bits */ |
| pci_intx_for_msi(dev, 0); |
| msi_set_enable(dev, 1); |
| dev->msi_enabled = 1; |
| |
| dev->irq = entry->irq; |
| return 0; |
| } |
| |
| /** |
| * msix_capability_init - configure device's MSI-X capability |
| * @dev: pointer to the pci_dev data structure of MSI-X device function |
| * @entries: pointer to an array of struct msix_entry entries |
| * @nvec: number of @entries |
| * |
| * Setup the MSI-X capability structure of device function with a |
| * single MSI-X irq. A return of zero indicates the successful setup of |
| * requested MSI-X entries with allocated irqs or non-zero for otherwise. |
| **/ |
| static int msix_capability_init(struct pci_dev *dev, |
| struct msix_entry *entries, int nvec) |
| { |
| struct msi_desc *entry; |
| int pos, i, j, nr_entries, ret; |
| unsigned long phys_addr; |
| u32 table_offset; |
| u16 control; |
| u8 bir; |
| void __iomem *base; |
| |
| msix_set_enable(dev, 0);/* Ensure msix is disabled as I set it up */ |
| |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); |
| /* Request & Map MSI-X table region */ |
| pci_read_config_word(dev, msi_control_reg(pos), &control); |
| nr_entries = multi_msix_capable(control); |
| |
| pci_read_config_dword(dev, msix_table_offset_reg(pos), &table_offset); |
| bir = (u8)(table_offset & PCI_MSIX_FLAGS_BIRMASK); |
| table_offset &= ~PCI_MSIX_FLAGS_BIRMASK; |
| phys_addr = pci_resource_start (dev, bir) + table_offset; |
| base = ioremap_nocache(phys_addr, nr_entries * PCI_MSIX_ENTRY_SIZE); |
| if (base == NULL) |
| return -ENOMEM; |
| |
| /* MSI-X Table Initialization */ |
| for (i = 0; i < nvec; i++) { |
| entry = alloc_msi_entry(); |
| if (!entry) |
| break; |
| |
| j = entries[i].entry; |
| entry->msi_attrib.type = PCI_CAP_ID_MSIX; |
| entry->msi_attrib.is_64 = 1; |
| entry->msi_attrib.entry_nr = j; |
| entry->msi_attrib.maskbit = 1; |
| entry->msi_attrib.masked = 1; |
| entry->msi_attrib.default_irq = dev->irq; |
| entry->msi_attrib.pos = pos; |
| entry->dev = dev; |
| entry->mask_base = base; |
| |
| list_add_tail(&entry->list, &dev->msi_list); |
| } |
| |
| ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX); |
| if (ret < 0) { |
| /* If we had some success report the number of irqs |
| * we succeeded in setting up. */ |
| int avail = 0; |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| if (entry->irq != 0) { |
| avail++; |
| } |
| } |
| |
| if (avail != 0) |
| ret = avail; |
| } |
| |
| if (ret) { |
| msi_free_irqs(dev); |
| return ret; |
| } |
| |
| i = 0; |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| entries[i].vector = entry->irq; |
| set_irq_msi(entry->irq, entry); |
| i++; |
| } |
| /* Set MSI-X enabled bits */ |
| pci_intx_for_msi(dev, 0); |
| msix_set_enable(dev, 1); |
| dev->msix_enabled = 1; |
| |
| return 0; |
| } |
| |
| /** |
| * pci_msi_check_device - check whether MSI may be enabled on a device |
| * @dev: pointer to the pci_dev data structure of MSI device function |
| * @nvec: how many MSIs have been requested ? |
| * @type: are we checking for MSI or MSI-X ? |
| * |
| * Look at global flags, the device itself, and its parent busses |
| * to determine if MSI/-X are supported for the device. If MSI/-X is |
| * supported return 0, else return an error code. |
| **/ |
| static int pci_msi_check_device(struct pci_dev* dev, int nvec, int type) |
| { |
| struct pci_bus *bus; |
| int ret; |
| |
| /* MSI must be globally enabled and supported by the device */ |
| if (!pci_msi_enable || !dev || dev->no_msi) |
| return -EINVAL; |
| |
| /* |
| * You can't ask to have 0 or less MSIs configured. |
| * a) it's stupid .. |
| * b) the list manipulation code assumes nvec >= 1. |
| */ |
| if (nvec < 1) |
| return -ERANGE; |
| |
| /* Any bridge which does NOT route MSI transactions from it's |
| * secondary bus to it's primary bus must set NO_MSI flag on |
| * the secondary pci_bus. |
| * We expect only arch-specific PCI host bus controller driver |
| * or quirks for specific PCI bridges to be setting NO_MSI. |
| */ |
| for (bus = dev->bus; bus; bus = bus->parent) |
| if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI) |
| return -EINVAL; |
| |
| ret = arch_msi_check_device(dev, nvec, type); |
| if (ret) |
| return ret; |
| |
| if (!pci_find_capability(dev, type)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /** |
| * pci_enable_msi - configure device's MSI capability structure |
| * @dev: pointer to the pci_dev data structure of MSI device function |
| * |
| * Setup the MSI capability structure of device function with |
| * a single MSI irq upon its software driver call to request for |
| * MSI mode enabled on its hardware device function. A return of zero |
| * indicates the successful setup of an entry zero with the new MSI |
| * irq or non-zero for otherwise. |
| **/ |
| int pci_enable_msi(struct pci_dev* dev) |
| { |
| int status; |
| |
| status = pci_msi_check_device(dev, 1, PCI_CAP_ID_MSI); |
| if (status) |
| return status; |
| |
| WARN_ON(!!dev->msi_enabled); |
| |
| /* Check whether driver already requested for MSI-X irqs */ |
| if (dev->msix_enabled) { |
| dev_info(&dev->dev, "can't enable MSI " |
| "(MSI-X already enabled)\n"); |
| return -EINVAL; |
| } |
| status = msi_capability_init(dev); |
| return status; |
| } |
| EXPORT_SYMBOL(pci_enable_msi); |
| |
| void pci_msi_shutdown(struct pci_dev* dev) |
| { |
| struct msi_desc *entry; |
| |
| if (!pci_msi_enable || !dev || !dev->msi_enabled) |
| return; |
| |
| msi_set_enable(dev, 0); |
| pci_intx_for_msi(dev, 1); |
| dev->msi_enabled = 0; |
| |
| BUG_ON(list_empty(&dev->msi_list)); |
| entry = list_entry(dev->msi_list.next, struct msi_desc, list); |
| /* Return the the pci reset with msi irqs unmasked */ |
| if (entry->msi_attrib.maskbit) { |
| u32 mask = entry->msi_attrib.maskbits_mask; |
| struct irq_desc *desc = irq_to_desc(dev->irq); |
| msi_set_mask_bits(desc, mask, ~mask); |
| } |
| if (!entry->dev || entry->msi_attrib.type != PCI_CAP_ID_MSI) |
| return; |
| |
| /* Restore dev->irq to its default pin-assertion irq */ |
| dev->irq = entry->msi_attrib.default_irq; |
| } |
| void pci_disable_msi(struct pci_dev* dev) |
| { |
| struct msi_desc *entry; |
| |
| if (!pci_msi_enable || !dev || !dev->msi_enabled) |
| return; |
| |
| pci_msi_shutdown(dev); |
| |
| entry = list_entry(dev->msi_list.next, struct msi_desc, list); |
| if (!entry->dev || entry->msi_attrib.type != PCI_CAP_ID_MSI) |
| return; |
| |
| msi_free_irqs(dev); |
| } |
| EXPORT_SYMBOL(pci_disable_msi); |
| |
| static int msi_free_irqs(struct pci_dev* dev) |
| { |
| struct msi_desc *entry, *tmp; |
| |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| if (entry->irq) |
| BUG_ON(irq_has_action(entry->irq)); |
| } |
| |
| arch_teardown_msi_irqs(dev); |
| |
| list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) { |
| if (entry->msi_attrib.type == PCI_CAP_ID_MSIX) { |
| writel(1, entry->mask_base + entry->msi_attrib.entry_nr |
| * PCI_MSIX_ENTRY_SIZE |
| + PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); |
| |
| if (list_is_last(&entry->list, &dev->msi_list)) |
| iounmap(entry->mask_base); |
| } |
| list_del(&entry->list); |
| kfree(entry); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * pci_msix_table_size - return the number of device's MSI-X table entries |
| * @dev: pointer to the pci_dev data structure of MSI-X device function |
| */ |
| int pci_msix_table_size(struct pci_dev *dev) |
| { |
| int pos; |
| u16 control; |
| |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); |
| if (!pos) |
| return 0; |
| |
| pci_read_config_word(dev, msi_control_reg(pos), &control); |
| return multi_msix_capable(control); |
| } |
| |
| /** |
| * pci_enable_msix - configure device's MSI-X capability structure |
| * @dev: pointer to the pci_dev data structure of MSI-X device function |
| * @entries: pointer to an array of MSI-X entries |
| * @nvec: number of MSI-X irqs requested for allocation by device driver |
| * |
| * Setup the MSI-X capability structure of device function with the number |
| * of requested irqs upon its software driver call to request for |
| * MSI-X mode enabled on its hardware device function. A return of zero |
| * indicates the successful configuration of MSI-X capability structure |
| * with new allocated MSI-X irqs. A return of < 0 indicates a failure. |
| * Or a return of > 0 indicates that driver request is exceeding the number |
| * of irqs available. Driver should use the returned value to re-send |
| * its request. |
| **/ |
| int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec) |
| { |
| int status, nr_entries; |
| int i, j; |
| |
| if (!entries) |
| return -EINVAL; |
| |
| status = pci_msi_check_device(dev, nvec, PCI_CAP_ID_MSIX); |
| if (status) |
| return status; |
| |
| nr_entries = pci_msix_table_size(dev); |
| if (nvec > nr_entries) |
| return -EINVAL; |
| |
| /* Check for any invalid entries */ |
| for (i = 0; i < nvec; i++) { |
| if (entries[i].entry >= nr_entries) |
| return -EINVAL; /* invalid entry */ |
| for (j = i + 1; j < nvec; j++) { |
| if (entries[i].entry == entries[j].entry) |
| return -EINVAL; /* duplicate entry */ |
| } |
| } |
| WARN_ON(!!dev->msix_enabled); |
| |
| /* Check whether driver already requested for MSI irq */ |
| if (dev->msi_enabled) { |
| dev_info(&dev->dev, "can't enable MSI-X " |
| "(MSI IRQ already assigned)\n"); |
| return -EINVAL; |
| } |
| status = msix_capability_init(dev, entries, nvec); |
| return status; |
| } |
| EXPORT_SYMBOL(pci_enable_msix); |
| |
| static void msix_free_all_irqs(struct pci_dev *dev) |
| { |
| msi_free_irqs(dev); |
| } |
| |
| void pci_msix_shutdown(struct pci_dev* dev) |
| { |
| if (!pci_msi_enable || !dev || !dev->msix_enabled) |
| return; |
| |
| msix_set_enable(dev, 0); |
| pci_intx_for_msi(dev, 1); |
| dev->msix_enabled = 0; |
| } |
| void pci_disable_msix(struct pci_dev* dev) |
| { |
| if (!pci_msi_enable || !dev || !dev->msix_enabled) |
| return; |
| |
| pci_msix_shutdown(dev); |
| |
| msix_free_all_irqs(dev); |
| } |
| EXPORT_SYMBOL(pci_disable_msix); |
| |
| /** |
| * msi_remove_pci_irq_vectors - reclaim MSI(X) irqs to unused state |
| * @dev: pointer to the pci_dev data structure of MSI(X) device function |
| * |
| * Being called during hotplug remove, from which the device function |
| * is hot-removed. All previous assigned MSI/MSI-X irqs, if |
| * allocated for this device function, are reclaimed to unused state, |
| * which may be used later on. |
| **/ |
| void msi_remove_pci_irq_vectors(struct pci_dev* dev) |
| { |
| if (!pci_msi_enable || !dev) |
| return; |
| |
| if (dev->msi_enabled) |
| msi_free_irqs(dev); |
| |
| if (dev->msix_enabled) |
| msix_free_all_irqs(dev); |
| } |
| |
| void pci_no_msi(void) |
| { |
| pci_msi_enable = 0; |
| } |
| |
| /** |
| * pci_msi_enabled - is MSI enabled? |
| * |
| * Returns true if MSI has not been disabled by the command-line option |
| * pci=nomsi. |
| **/ |
| int pci_msi_enabled(void) |
| { |
| return pci_msi_enable; |
| } |
| EXPORT_SYMBOL(pci_msi_enabled); |
| |
| void pci_msi_init_pci_dev(struct pci_dev *dev) |
| { |
| INIT_LIST_HEAD(&dev->msi_list); |
| } |