| /* |
| * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) |
| * Licensed under the GPL |
| */ |
| |
| #include "linux/sched.h" |
| #include "linux/signal.h" |
| #include "linux/kernel.h" |
| #include "linux/interrupt.h" |
| #include "linux/ptrace.h" |
| #include "asm/system.h" |
| #include "asm/pgalloc.h" |
| #include "asm/ptrace.h" |
| #include "asm/tlbflush.h" |
| #include "irq_user.h" |
| #include "kern_util.h" |
| #include "user_util.h" |
| #include "os.h" |
| #include "kern.h" |
| #include "sigcontext.h" |
| #include "mem_user.h" |
| #include "tlb.h" |
| #include "mode.h" |
| #include "mode_kern.h" |
| #include "init.h" |
| #include "tt.h" |
| |
| void switch_to_tt(void *prev, void *next) |
| { |
| struct task_struct *from, *to, *prev_sched; |
| unsigned long flags; |
| int err, vtalrm, alrm, prof, cpu; |
| char c; |
| |
| from = prev; |
| to = next; |
| |
| cpu = task_thread_info(from)->cpu; |
| if(cpu == 0) |
| forward_interrupts(to->thread.mode.tt.extern_pid); |
| #ifdef CONFIG_SMP |
| forward_ipi(cpu_data[cpu].ipi_pipe[0], to->thread.mode.tt.extern_pid); |
| #endif |
| local_irq_save(flags); |
| |
| vtalrm = change_sig(SIGVTALRM, 0); |
| alrm = change_sig(SIGALRM, 0); |
| prof = change_sig(SIGPROF, 0); |
| |
| forward_pending_sigio(to->thread.mode.tt.extern_pid); |
| |
| c = 0; |
| |
| err = os_write_file(to->thread.mode.tt.switch_pipe[1], &c, sizeof(c)); |
| if(err != sizeof(c)) |
| panic("write of switch_pipe failed, err = %d", -err); |
| |
| if(from->thread.mode.tt.switch_pipe[0] == -1) |
| os_kill_process(os_getpid(), 0); |
| |
| err = os_read_file(from->thread.mode.tt.switch_pipe[0], &c, sizeof(c)); |
| if(err != sizeof(c)) |
| panic("read of switch_pipe failed, errno = %d", -err); |
| |
| /* If the process that we have just scheduled away from has exited, |
| * then it needs to be killed here. The reason is that, even though |
| * it will kill itself when it next runs, that may be too late. Its |
| * stack will be freed, possibly before then, and if that happens, |
| * we have a use-after-free situation. So, it gets killed here |
| * in case it has not already killed itself. |
| */ |
| prev_sched = current->thread.prev_sched; |
| if(prev_sched->thread.mode.tt.switch_pipe[0] == -1) |
| os_kill_process(prev_sched->thread.mode.tt.extern_pid, 1); |
| |
| change_sig(SIGVTALRM, vtalrm); |
| change_sig(SIGALRM, alrm); |
| change_sig(SIGPROF, prof); |
| |
| arch_switch(); |
| |
| flush_tlb_all(); |
| local_irq_restore(flags); |
| } |
| |
| void release_thread_tt(struct task_struct *task) |
| { |
| int pid = task->thread.mode.tt.extern_pid; |
| |
| /* |
| * We first have to kill the other process, before |
| * closing its switch_pipe. Else it might wake up |
| * and receive "EOF" before we could kill it. |
| */ |
| if(os_getpid() != pid) |
| os_kill_process(pid, 0); |
| |
| os_close_file(task->thread.mode.tt.switch_pipe[0]); |
| os_close_file(task->thread.mode.tt.switch_pipe[1]); |
| /* use switch_pipe as flag: thread is released */ |
| task->thread.mode.tt.switch_pipe[0] = -1; |
| } |
| |
| void suspend_new_thread(int fd) |
| { |
| int err; |
| char c; |
| |
| os_stop_process(os_getpid()); |
| err = os_read_file(fd, &c, sizeof(c)); |
| if(err != sizeof(c)) |
| panic("read failed in suspend_new_thread, err = %d", -err); |
| } |
| |
| void schedule_tail(task_t *prev); |
| |
| static void new_thread_handler(int sig) |
| { |
| unsigned long disable; |
| int (*fn)(void *); |
| void *arg; |
| |
| fn = current->thread.request.u.thread.proc; |
| arg = current->thread.request.u.thread.arg; |
| |
| UPT_SC(¤t->thread.regs.regs) = (void *) (&sig + 1); |
| disable = (1 << (SIGVTALRM - 1)) | (1 << (SIGALRM - 1)) | |
| (1 << (SIGIO - 1)) | (1 << (SIGPROF - 1)); |
| SC_SIGMASK(UPT_SC(¤t->thread.regs.regs)) &= ~disable; |
| |
| suspend_new_thread(current->thread.mode.tt.switch_pipe[0]); |
| |
| force_flush_all(); |
| if(current->thread.prev_sched != NULL) |
| schedule_tail(current->thread.prev_sched); |
| current->thread.prev_sched = NULL; |
| |
| init_new_thread_signals(1); |
| enable_timer(); |
| free_page(current->thread.temp_stack); |
| set_cmdline("(kernel thread)"); |
| |
| change_sig(SIGUSR1, 1); |
| change_sig(SIGVTALRM, 1); |
| change_sig(SIGPROF, 1); |
| local_irq_enable(); |
| if(!run_kernel_thread(fn, arg, ¤t->thread.exec_buf)) |
| do_exit(0); |
| |
| /* XXX No set_user_mode here because a newly execed process will |
| * immediately segfault on its non-existent IP, coming straight back |
| * to the signal handler, which will call set_user_mode on its way |
| * out. This should probably change since it's confusing. |
| */ |
| } |
| |
| static int new_thread_proc(void *stack) |
| { |
| /* local_irq_disable is needed to block out signals until this thread is |
| * properly scheduled. Otherwise, the tracing thread will get mighty |
| * upset about any signals that arrive before that. |
| * This has the complication that it sets the saved signal mask in |
| * the sigcontext to block signals. This gets restored when this |
| * thread (or a descendant, since they get a copy of this sigcontext) |
| * returns to userspace. |
| * So, this is compensated for elsewhere. |
| * XXX There is still a small window until local_irq_disable() actually |
| * finishes where signals are possible - shouldn't be a problem in |
| * practice since SIGIO hasn't been forwarded here yet, and the |
| * local_irq_disable should finish before a SIGVTALRM has time to be |
| * delivered. |
| */ |
| |
| local_irq_disable(); |
| init_new_thread_stack(stack, new_thread_handler); |
| os_usr1_process(os_getpid()); |
| change_sig(SIGUSR1, 1); |
| return(0); |
| } |
| |
| /* Signal masking - signals are blocked at the start of fork_tramp. They |
| * are re-enabled when finish_fork_handler is entered by fork_tramp hitting |
| * itself with a SIGUSR1. set_user_mode has to be run with SIGUSR1 off, |
| * so it is blocked before it's called. They are re-enabled on sigreturn |
| * despite the fact that they were blocked when the SIGUSR1 was issued because |
| * copy_thread copies the parent's sigcontext, including the signal mask |
| * onto the signal frame. |
| */ |
| |
| void finish_fork_handler(int sig) |
| { |
| UPT_SC(¤t->thread.regs.regs) = (void *) (&sig + 1); |
| suspend_new_thread(current->thread.mode.tt.switch_pipe[0]); |
| |
| force_flush_all(); |
| if(current->thread.prev_sched != NULL) |
| schedule_tail(current->thread.prev_sched); |
| current->thread.prev_sched = NULL; |
| |
| enable_timer(); |
| change_sig(SIGVTALRM, 1); |
| local_irq_enable(); |
| if(current->mm != current->parent->mm) |
| protect_memory(uml_reserved, high_physmem - uml_reserved, 1, |
| 1, 0, 1); |
| task_protections((unsigned long) current_thread); |
| |
| free_page(current->thread.temp_stack); |
| local_irq_disable(); |
| change_sig(SIGUSR1, 0); |
| set_user_mode(current); |
| } |
| |
| int fork_tramp(void *stack) |
| { |
| local_irq_disable(); |
| arch_init_thread(); |
| init_new_thread_stack(stack, finish_fork_handler); |
| |
| os_usr1_process(os_getpid()); |
| change_sig(SIGUSR1, 1); |
| return(0); |
| } |
| |
| int copy_thread_tt(int nr, unsigned long clone_flags, unsigned long sp, |
| unsigned long stack_top, struct task_struct * p, |
| struct pt_regs *regs) |
| { |
| int (*tramp)(void *); |
| int new_pid, err; |
| unsigned long stack; |
| |
| if(current->thread.forking) |
| tramp = fork_tramp; |
| else { |
| tramp = new_thread_proc; |
| p->thread.request.u.thread = current->thread.request.u.thread; |
| } |
| |
| err = os_pipe(p->thread.mode.tt.switch_pipe, 1, 1); |
| if(err < 0){ |
| printk("copy_thread : pipe failed, err = %d\n", -err); |
| return(err); |
| } |
| |
| stack = alloc_stack(0, 0); |
| if(stack == 0){ |
| printk(KERN_ERR "copy_thread : failed to allocate " |
| "temporary stack\n"); |
| return(-ENOMEM); |
| } |
| |
| clone_flags &= CLONE_VM; |
| p->thread.temp_stack = stack; |
| new_pid = start_fork_tramp(task_stack_page(p), stack, clone_flags, tramp); |
| if(new_pid < 0){ |
| printk(KERN_ERR "copy_thread : clone failed - errno = %d\n", |
| -new_pid); |
| return(new_pid); |
| } |
| |
| if(current->thread.forking){ |
| sc_to_sc(UPT_SC(&p->thread.regs.regs), UPT_SC(®s->regs)); |
| SC_SET_SYSCALL_RETURN(UPT_SC(&p->thread.regs.regs), 0); |
| if(sp != 0) |
| SC_SP(UPT_SC(&p->thread.regs.regs)) = sp; |
| } |
| p->thread.mode.tt.extern_pid = new_pid; |
| |
| current->thread.request.op = OP_FORK; |
| current->thread.request.u.fork.pid = new_pid; |
| os_usr1_process(os_getpid()); |
| |
| /* Enable the signal and then disable it to ensure that it is handled |
| * here, and nowhere else. |
| */ |
| change_sig(SIGUSR1, 1); |
| |
| change_sig(SIGUSR1, 0); |
| err = 0; |
| return(err); |
| } |
| |
| void reboot_tt(void) |
| { |
| current->thread.request.op = OP_REBOOT; |
| os_usr1_process(os_getpid()); |
| change_sig(SIGUSR1, 1); |
| } |
| |
| void halt_tt(void) |
| { |
| current->thread.request.op = OP_HALT; |
| os_usr1_process(os_getpid()); |
| change_sig(SIGUSR1, 1); |
| } |
| |
| void kill_off_processes_tt(void) |
| { |
| struct task_struct *p; |
| int me; |
| |
| me = os_getpid(); |
| for_each_process(p){ |
| if(p->thread.mode.tt.extern_pid != me) |
| os_kill_process(p->thread.mode.tt.extern_pid, 0); |
| } |
| if(init_task.thread.mode.tt.extern_pid != me) |
| os_kill_process(init_task.thread.mode.tt.extern_pid, 0); |
| } |
| |
| void initial_thread_cb_tt(void (*proc)(void *), void *arg) |
| { |
| if(os_getpid() == tracing_pid){ |
| (*proc)(arg); |
| } |
| else { |
| current->thread.request.op = OP_CB; |
| current->thread.request.u.cb.proc = proc; |
| current->thread.request.u.cb.arg = arg; |
| os_usr1_process(os_getpid()); |
| change_sig(SIGUSR1, 1); |
| |
| change_sig(SIGUSR1, 0); |
| } |
| } |
| |
| int do_proc_op(void *t, int proc_id) |
| { |
| struct task_struct *task; |
| struct thread_struct *thread; |
| int op, pid; |
| |
| task = t; |
| thread = &task->thread; |
| op = thread->request.op; |
| switch(op){ |
| case OP_NONE: |
| case OP_TRACE_ON: |
| break; |
| case OP_EXEC: |
| pid = thread->request.u.exec.pid; |
| do_exec(thread->mode.tt.extern_pid, pid); |
| thread->mode.tt.extern_pid = pid; |
| cpu_tasks[task_thread_info(task)->cpu].pid = pid; |
| break; |
| case OP_FORK: |
| attach_process(thread->request.u.fork.pid); |
| break; |
| case OP_CB: |
| (*thread->request.u.cb.proc)(thread->request.u.cb.arg); |
| break; |
| case OP_REBOOT: |
| case OP_HALT: |
| break; |
| default: |
| tracer_panic("Bad op in do_proc_op"); |
| break; |
| } |
| thread->request.op = OP_NONE; |
| return(op); |
| } |
| |
| void init_idle_tt(void) |
| { |
| default_idle(); |
| } |
| |
| extern void start_kernel(void); |
| |
| static int start_kernel_proc(void *unused) |
| { |
| int pid; |
| |
| block_signals(); |
| pid = os_getpid(); |
| |
| cpu_tasks[0].pid = pid; |
| cpu_tasks[0].task = current; |
| #ifdef CONFIG_SMP |
| cpu_online_map = cpumask_of_cpu(0); |
| #endif |
| if(debug) os_stop_process(pid); |
| start_kernel(); |
| return(0); |
| } |
| |
| void set_tracing(void *task, int tracing) |
| { |
| ((struct task_struct *) task)->thread.mode.tt.tracing = tracing; |
| } |
| |
| int is_tracing(void *t) |
| { |
| return (((struct task_struct *) t)->thread.mode.tt.tracing); |
| } |
| |
| int set_user_mode(void *t) |
| { |
| struct task_struct *task; |
| |
| task = t ? t : current; |
| if(task->thread.mode.tt.tracing) |
| return(1); |
| task->thread.request.op = OP_TRACE_ON; |
| os_usr1_process(os_getpid()); |
| return(0); |
| } |
| |
| void set_init_pid(int pid) |
| { |
| int err; |
| |
| init_task.thread.mode.tt.extern_pid = pid; |
| err = os_pipe(init_task.thread.mode.tt.switch_pipe, 1, 1); |
| if(err) |
| panic("Can't create switch pipe for init_task, errno = %d", |
| -err); |
| } |
| |
| int start_uml_tt(void) |
| { |
| void *sp; |
| int pages; |
| |
| pages = (1 << CONFIG_KERNEL_STACK_ORDER); |
| sp = task_stack_page(&init_task) + |
| pages * PAGE_SIZE - sizeof(unsigned long); |
| return(tracer(start_kernel_proc, sp)); |
| } |
| |
| int external_pid_tt(struct task_struct *task) |
| { |
| return(task->thread.mode.tt.extern_pid); |
| } |
| |
| int thread_pid_tt(struct task_struct *task) |
| { |
| return(task->thread.mode.tt.extern_pid); |
| } |
| |
| int is_valid_pid(int pid) |
| { |
| struct task_struct *task; |
| |
| read_lock(&tasklist_lock); |
| for_each_process(task){ |
| if(task->thread.mode.tt.extern_pid == pid){ |
| read_unlock(&tasklist_lock); |
| return(1); |
| } |
| } |
| read_unlock(&tasklist_lock); |
| return(0); |
| } |