| /* Linux driver for devices based on the DiBcom DiB0700 USB bridge |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation, version 2. |
| * |
| * Copyright (C) 2005-7 DiBcom, SA |
| */ |
| #include "dib0700.h" |
| |
| #include "dib3000mc.h" |
| #include "dib7000m.h" |
| #include "dib7000p.h" |
| #include "mt2060.h" |
| #include "mt2266.h" |
| #include "tuner-xc2028.h" |
| #include "xc5000.h" |
| #include "s5h1411.h" |
| #include "dib0070.h" |
| |
| static int force_lna_activation; |
| module_param(force_lna_activation, int, 0644); |
| MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), " |
| "if applicable for the device (default: 0=automatic/off)."); |
| |
| struct dib0700_adapter_state { |
| int (*set_param_save) (struct dvb_frontend *, struct dvb_frontend_parameters *); |
| }; |
| |
| /* Hauppauge Nova-T 500 (aka Bristol) |
| * has a LNA on GPIO0 which is enabled by setting 1 */ |
| static struct mt2060_config bristol_mt2060_config[2] = { |
| { |
| .i2c_address = 0x60, |
| .clock_out = 3, |
| }, { |
| .i2c_address = 0x61, |
| } |
| }; |
| |
| |
| static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = { |
| .band_caps = BAND_VHF | BAND_UHF, |
| .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0), |
| |
| .agc1_max = 42598, |
| .agc1_min = 17694, |
| .agc2_max = 45875, |
| .agc2_min = 0, |
| |
| .agc1_pt1 = 0, |
| .agc1_pt2 = 59, |
| |
| .agc1_slope1 = 0, |
| .agc1_slope2 = 69, |
| |
| .agc2_pt1 = 0, |
| .agc2_pt2 = 59, |
| |
| .agc2_slope1 = 111, |
| .agc2_slope2 = 28, |
| }; |
| |
| static struct dib3000mc_config bristol_dib3000mc_config[2] = { |
| { .agc = &bristol_dib3000p_mt2060_agc_config, |
| .max_time = 0x196, |
| .ln_adc_level = 0x1cc7, |
| .output_mpeg2_in_188_bytes = 1, |
| }, |
| { .agc = &bristol_dib3000p_mt2060_agc_config, |
| .max_time = 0x196, |
| .ln_adc_level = 0x1cc7, |
| .output_mpeg2_in_188_bytes = 1, |
| } |
| }; |
| |
| static int bristol_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_state *st = adap->dev->priv; |
| if (adap->id == 0) { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); |
| |
| if (force_lna_activation) |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| else |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); |
| |
| if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); |
| return -ENODEV; |
| } |
| } |
| st->mt2060_if1[adap->id] = 1220; |
| return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, |
| (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0; |
| } |
| |
| static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval) |
| { |
| struct i2c_msg msg[2] = { |
| { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 }, |
| { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 }, |
| }; |
| if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO; |
| return 0; |
| } |
| |
| static int bristol_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; |
| struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1); |
| s8 a; |
| int if1=1220; |
| if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && |
| adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { |
| if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; |
| } |
| return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id], |
| if1) == NULL ? -ENODEV : 0; |
| } |
| |
| /* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */ |
| |
| /* MT226x */ |
| static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = { |
| { |
| BAND_UHF, // band_caps |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup |
| |
| 1130, // inv_gain |
| 21, // time_stabiliz |
| |
| 0, // alpha_level |
| 118, // thlock |
| |
| 0, // wbd_inv |
| 3530, // wbd_ref |
| 1, // wbd_sel |
| 0, // wbd_alpha |
| |
| 65535, // agc1_max |
| 33770, // agc1_min |
| 65535, // agc2_max |
| 23592, // agc2_min |
| |
| 0, // agc1_pt1 |
| 62, // agc1_pt2 |
| 255, // agc1_pt3 |
| 64, // agc1_slope1 |
| 64, // agc1_slope2 |
| 132, // agc2_pt1 |
| 192, // agc2_pt2 |
| 80, // agc2_slope1 |
| 80, // agc2_slope2 |
| |
| 17, // alpha_mant |
| 27, // alpha_exp |
| 23, // beta_mant |
| 51, // beta_exp |
| |
| 1, // perform_agc_softsplit |
| }, { |
| BAND_VHF | BAND_LBAND, // band_caps |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup |
| |
| 2372, // inv_gain |
| 21, // time_stabiliz |
| |
| 0, // alpha_level |
| 118, // thlock |
| |
| 0, // wbd_inv |
| 3530, // wbd_ref |
| 1, // wbd_sel |
| 0, // wbd_alpha |
| |
| 65535, // agc1_max |
| 0, // agc1_min |
| 65535, // agc2_max |
| 23592, // agc2_min |
| |
| 0, // agc1_pt1 |
| 128, // agc1_pt2 |
| 128, // agc1_pt3 |
| 128, // agc1_slope1 |
| 0, // agc1_slope2 |
| 128, // agc2_pt1 |
| 253, // agc2_pt2 |
| 81, // agc2_slope1 |
| 0, // agc2_slope2 |
| |
| 17, // alpha_mant |
| 27, // alpha_exp |
| 23, // beta_mant |
| 51, // beta_exp |
| |
| 1, // perform_agc_softsplit |
| } |
| }; |
| |
| static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = { |
| 60000, 30000, // internal, sampling |
| 1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass |
| 0, 0, 1, 1, 2, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo |
| (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k |
| 0, // ifreq |
| 20452225, // timf |
| }; |
| |
| static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = { |
| { .output_mpeg2_in_188_bytes = 1, |
| .hostbus_diversity = 1, |
| .tuner_is_baseband = 1, |
| |
| .agc_config_count = 2, |
| .agc = stk7700d_7000p_mt2266_agc_config, |
| .bw = &stk7700d_mt2266_pll_config, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| }, |
| { .output_mpeg2_in_188_bytes = 1, |
| .hostbus_diversity = 1, |
| .tuner_is_baseband = 1, |
| |
| .agc_config_count = 2, |
| .agc = stk7700d_7000p_mt2266_agc_config, |
| .bw = &stk7700d_mt2266_pll_config, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| } |
| }; |
| |
| static struct mt2266_config stk7700d_mt2266_config[2] = { |
| { .i2c_address = 0x60 |
| }, |
| { .i2c_address = 0x60 |
| } |
| }; |
| |
| static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| if (adap->id == 0) { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(10); |
| dib7000p_i2c_enumeration(&adap->dev->i2c_adap,1,18,stk7700d_dib7000p_mt2266_config); |
| } |
| |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1), |
| &stk7700d_dib7000p_mt2266_config[adap->id]); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| if (adap->id == 0) { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| dib7000p_i2c_enumeration(&adap->dev->i2c_adap,2,18,stk7700d_dib7000p_mt2266_config); |
| } |
| |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1), |
| &stk7700d_dib7000p_mt2266_config[adap->id]); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct i2c_adapter *tun_i2c; |
| tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); |
| return dvb_attach(mt2266_attach, adap->fe, tun_i2c, |
| &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;; |
| } |
| |
| /* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */ |
| static struct dibx000_agc_config xc3028_agc_config = { |
| BAND_VHF | BAND_UHF, /* band_caps */ |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, |
| * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, |
| * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | |
| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ |
| |
| 712, /* inv_gain */ |
| 21, /* time_stabiliz */ |
| |
| 0, /* alpha_level */ |
| 118, /* thlock */ |
| |
| 0, /* wbd_inv */ |
| 2867, /* wbd_ref */ |
| 0, /* wbd_sel */ |
| 2, /* wbd_alpha */ |
| |
| 0, /* agc1_max */ |
| 0, /* agc1_min */ |
| 39718, /* agc2_max */ |
| 9930, /* agc2_min */ |
| 0, /* agc1_pt1 */ |
| 0, /* agc1_pt2 */ |
| 0, /* agc1_pt3 */ |
| 0, /* agc1_slope1 */ |
| 0, /* agc1_slope2 */ |
| 0, /* agc2_pt1 */ |
| 128, /* agc2_pt2 */ |
| 29, /* agc2_slope1 */ |
| 29, /* agc2_slope2 */ |
| |
| 17, /* alpha_mant */ |
| 27, /* alpha_exp */ |
| 23, /* beta_mant */ |
| 51, /* beta_exp */ |
| |
| 1, /* perform_agc_softsplit */ |
| }; |
| |
| /* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */ |
| static struct dibx000_bandwidth_config xc3028_bw_config = { |
| 60000, 30000, /* internal, sampling */ |
| 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */ |
| 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, |
| modulo */ |
| (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ |
| (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ |
| 20452225, /* timf */ |
| 30000000, /* xtal_hz */ |
| }; |
| |
| static struct dib7000p_config stk7700ph_dib7700_xc3028_config = { |
| .output_mpeg2_in_188_bytes = 1, |
| .tuner_is_baseband = 1, |
| |
| .agc_config_count = 1, |
| .agc = &xc3028_agc_config, |
| .bw = &xc3028_bw_config, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| }; |
| |
| static int stk7700ph_xc3028_callback(void *ptr, int component, |
| int command, int arg) |
| { |
| struct dvb_usb_adapter *adap = ptr; |
| |
| switch (command) { |
| case XC2028_TUNER_RESET: |
| /* Send the tuner in then out of reset */ |
| dib7000p_set_gpio(adap->fe, 8, 0, 0); msleep(10); |
| dib7000p_set_gpio(adap->fe, 8, 0, 1); |
| break; |
| case XC2028_RESET_CLK: |
| break; |
| default: |
| err("%s: unknown command %d, arg %d\n", __func__, |
| command, arg); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static struct xc2028_ctrl stk7700ph_xc3028_ctrl = { |
| .fname = XC2028_DEFAULT_FIRMWARE, |
| .max_len = 64, |
| .demod = XC3028_FE_DIBCOM52, |
| }; |
| |
| static struct xc2028_config stk7700ph_xc3028_config = { |
| .i2c_addr = 0x61, |
| .ctrl = &stk7700ph_xc3028_ctrl, |
| }; |
| |
| static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; |
| |
| if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && |
| desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); |
| else |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(20); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(20); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| msleep(10); |
| |
| dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, |
| &stk7700ph_dib7700_xc3028_config); |
| |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, |
| &stk7700ph_dib7700_xc3028_config); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct i2c_adapter *tun_i2c; |
| |
| tun_i2c = dib7000p_get_i2c_master(adap->fe, |
| DIBX000_I2C_INTERFACE_TUNER, 1); |
| |
| stk7700ph_xc3028_config.i2c_adap = tun_i2c; |
| |
| /* FIXME: generalize & move to common area */ |
| adap->fe->callback = stk7700ph_xc3028_callback; |
| |
| return dvb_attach(xc2028_attach, adap->fe, &stk7700ph_xc3028_config) |
| == NULL ? -ENODEV : 0; |
| } |
| |
| #define DEFAULT_RC_INTERVAL 150 |
| |
| static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; |
| |
| /* Number of keypresses to ignore before start repeating */ |
| #define RC_REPEAT_DELAY 2 |
| #define RC_REPEAT_DELAY_V1_20 5 |
| |
| |
| |
| /* Used by firmware versions < 1.20 (deprecated) */ |
| static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event, |
| int *state) |
| { |
| u8 key[4]; |
| int i; |
| struct dvb_usb_rc_key *keymap = d->props.rc_key_map; |
| struct dib0700_state *st = d->priv; |
| *event = 0; |
| *state = REMOTE_NO_KEY_PRESSED; |
| i=dib0700_ctrl_rd(d,rc_request,2,key,4); |
| if (i<=0) { |
| err("RC Query Failed"); |
| return -1; |
| } |
| |
| /* losing half of KEY_0 events from Philipps rc5 remotes.. */ |
| if (key[0]==0 && key[1]==0 && key[2]==0 && key[3]==0) return 0; |
| |
| /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */ |
| |
| dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */ |
| |
| switch (dvb_usb_dib0700_ir_proto) { |
| case 0: { |
| /* NEC protocol sends repeat code as 0 0 0 FF */ |
| if ((key[3-2] == 0x00) && (key[3-3] == 0x00) && |
| (key[3] == 0xFF)) { |
| st->rc_counter++; |
| if (st->rc_counter > RC_REPEAT_DELAY) { |
| *event = d->last_event; |
| *state = REMOTE_KEY_PRESSED; |
| st->rc_counter = RC_REPEAT_DELAY; |
| } |
| return 0; |
| } |
| for (i=0;i<d->props.rc_key_map_size; i++) { |
| if (keymap[i].custom == key[3-2] && keymap[i].data == key[3-3]) { |
| st->rc_counter = 0; |
| *event = keymap[i].event; |
| *state = REMOTE_KEY_PRESSED; |
| d->last_event = keymap[i].event; |
| return 0; |
| } |
| } |
| break; |
| } |
| default: { |
| /* RC-5 protocol changes toggle bit on new keypress */ |
| for (i = 0; i < d->props.rc_key_map_size; i++) { |
| if (keymap[i].custom == key[3-2] && keymap[i].data == key[3-3]) { |
| if (d->last_event == keymap[i].event && |
| key[3-1] == st->rc_toggle) { |
| st->rc_counter++; |
| /* prevents unwanted double hits */ |
| if (st->rc_counter > RC_REPEAT_DELAY) { |
| *event = d->last_event; |
| *state = REMOTE_KEY_PRESSED; |
| st->rc_counter = RC_REPEAT_DELAY; |
| } |
| |
| return 0; |
| } |
| st->rc_counter = 0; |
| *event = keymap[i].event; |
| *state = REMOTE_KEY_PRESSED; |
| st->rc_toggle = key[3-1]; |
| d->last_event = keymap[i].event; |
| return 0; |
| } |
| } |
| break; |
| } |
| } |
| err("Unknown remote controller key: %2X %2X %2X %2X", (int) key[3-2], (int) key[3-3], (int) key[3-1], (int) key[3]); |
| d->last_event = 0; |
| return 0; |
| } |
| |
| /* This is the structure of the RC response packet starting in firmware 1.20 */ |
| struct dib0700_rc_response { |
| u8 report_id; |
| u8 data_state; |
| u8 system_msb; |
| u8 system_lsb; |
| u8 data; |
| u8 not_data; |
| }; |
| |
| /* This supports the new IR response format for firmware v1.20 */ |
| static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event, |
| int *state) |
| { |
| struct dvb_usb_rc_key *keymap = d->props.rc_key_map; |
| struct dib0700_state *st = d->priv; |
| struct dib0700_rc_response poll_reply; |
| u8 buf[6]; |
| int i; |
| int status; |
| int actlen; |
| int found = 0; |
| |
| /* Set initial results in case we exit the function early */ |
| *event = 0; |
| *state = REMOTE_NO_KEY_PRESSED; |
| |
| /* Firmware v1.20 provides RC data via bulk endpoint 1 */ |
| status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf, |
| sizeof(buf), &actlen, 50); |
| if (status < 0) { |
| /* No data available (meaning no key press) */ |
| return 0; |
| } |
| |
| if (actlen != sizeof(buf)) { |
| /* We didn't get back the 6 byte message we expected */ |
| err("Unexpected RC response size [%d]", actlen); |
| return -1; |
| } |
| |
| poll_reply.report_id = buf[0]; |
| poll_reply.data_state = buf[1]; |
| poll_reply.system_msb = buf[2]; |
| poll_reply.system_lsb = buf[3]; |
| poll_reply.data = buf[4]; |
| poll_reply.not_data = buf[5]; |
| |
| /* |
| info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n", |
| poll_reply.report_id, poll_reply.data_state, |
| poll_reply.system_msb, poll_reply.system_lsb, |
| poll_reply.data, poll_reply.not_data); |
| */ |
| |
| if ((poll_reply.data + poll_reply.not_data) != 0xff) { |
| /* Key failed integrity check */ |
| err("key failed integrity check: %02x %02x %02x %02x", |
| poll_reply.system_msb, poll_reply.system_lsb, |
| poll_reply.data, poll_reply.not_data); |
| return -1; |
| } |
| |
| /* Find the key in the map */ |
| for (i = 0; i < d->props.rc_key_map_size; i++) { |
| if (keymap[i].custom == poll_reply.system_lsb && |
| keymap[i].data == poll_reply.data) { |
| *event = keymap[i].event; |
| found = 1; |
| break; |
| } |
| } |
| |
| if (found == 0) { |
| err("Unknown remote controller key: %02x %02x %02x %02x", |
| poll_reply.system_msb, poll_reply.system_lsb, |
| poll_reply.data, poll_reply.not_data); |
| d->last_event = 0; |
| return 0; |
| } |
| |
| if (poll_reply.data_state == 1) { |
| /* New key hit */ |
| st->rc_counter = 0; |
| *event = keymap[i].event; |
| *state = REMOTE_KEY_PRESSED; |
| d->last_event = keymap[i].event; |
| } else if (poll_reply.data_state == 2) { |
| /* Key repeated */ |
| st->rc_counter++; |
| |
| /* prevents unwanted double hits */ |
| if (st->rc_counter > RC_REPEAT_DELAY_V1_20) { |
| *event = d->last_event; |
| *state = REMOTE_KEY_PRESSED; |
| st->rc_counter = RC_REPEAT_DELAY_V1_20; |
| } |
| } else { |
| err("Unknown data state [%d]", poll_reply.data_state); |
| } |
| |
| return 0; |
| } |
| |
| static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) |
| { |
| struct dib0700_state *st = d->priv; |
| |
| /* Because some people may have improperly named firmware files, |
| let's figure out whether to use the new firmware call or the legacy |
| call based on the firmware version embedded in the file */ |
| if (st->rc_func_version == 0) { |
| u32 hwver, romver, ramver, fwtype; |
| int ret = dib0700_get_version(d, &hwver, &romver, &ramver, |
| &fwtype); |
| if (ret < 0) { |
| err("Could not determine version info"); |
| return -1; |
| } |
| if (ramver < 0x10200) |
| st->rc_func_version = 1; |
| else |
| st->rc_func_version = 2; |
| } |
| |
| if (st->rc_func_version == 2) |
| return dib0700_rc_query_v1_20(d, event, state); |
| else |
| return dib0700_rc_query_legacy(d, event, state); |
| } |
| |
| static struct dvb_usb_rc_key dib0700_rc_keys[] = { |
| /* Key codes for the tiny Pinnacle remote*/ |
| { 0x07, 0x00, KEY_MUTE }, |
| { 0x07, 0x01, KEY_MENU }, // Pinnacle logo |
| { 0x07, 0x39, KEY_POWER }, |
| { 0x07, 0x03, KEY_VOLUMEUP }, |
| { 0x07, 0x09, KEY_VOLUMEDOWN }, |
| { 0x07, 0x06, KEY_CHANNELUP }, |
| { 0x07, 0x0c, KEY_CHANNELDOWN }, |
| { 0x07, 0x0f, KEY_1 }, |
| { 0x07, 0x15, KEY_2 }, |
| { 0x07, 0x10, KEY_3 }, |
| { 0x07, 0x18, KEY_4 }, |
| { 0x07, 0x1b, KEY_5 }, |
| { 0x07, 0x1e, KEY_6 }, |
| { 0x07, 0x11, KEY_7 }, |
| { 0x07, 0x21, KEY_8 }, |
| { 0x07, 0x12, KEY_9 }, |
| { 0x07, 0x27, KEY_0 }, |
| { 0x07, 0x24, KEY_SCREEN }, // 'Square' key |
| { 0x07, 0x2a, KEY_TEXT }, // 'T' key |
| { 0x07, 0x2d, KEY_REWIND }, |
| { 0x07, 0x30, KEY_PLAY }, |
| { 0x07, 0x33, KEY_FASTFORWARD }, |
| { 0x07, 0x36, KEY_RECORD }, |
| { 0x07, 0x3c, KEY_STOP }, |
| { 0x07, 0x3f, KEY_CANCEL }, // '?' key |
| /* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */ |
| { 0xeb, 0x01, KEY_POWER }, |
| { 0xeb, 0x02, KEY_1 }, |
| { 0xeb, 0x03, KEY_2 }, |
| { 0xeb, 0x04, KEY_3 }, |
| { 0xeb, 0x05, KEY_4 }, |
| { 0xeb, 0x06, KEY_5 }, |
| { 0xeb, 0x07, KEY_6 }, |
| { 0xeb, 0x08, KEY_7 }, |
| { 0xeb, 0x09, KEY_8 }, |
| { 0xeb, 0x0a, KEY_9 }, |
| { 0xeb, 0x0b, KEY_VIDEO }, |
| { 0xeb, 0x0c, KEY_0 }, |
| { 0xeb, 0x0d, KEY_REFRESH }, |
| { 0xeb, 0x0f, KEY_EPG }, |
| { 0xeb, 0x10, KEY_UP }, |
| { 0xeb, 0x11, KEY_LEFT }, |
| { 0xeb, 0x12, KEY_OK }, |
| { 0xeb, 0x13, KEY_RIGHT }, |
| { 0xeb, 0x14, KEY_DOWN }, |
| { 0xeb, 0x16, KEY_INFO }, |
| { 0xeb, 0x17, KEY_RED }, |
| { 0xeb, 0x18, KEY_GREEN }, |
| { 0xeb, 0x19, KEY_YELLOW }, |
| { 0xeb, 0x1a, KEY_BLUE }, |
| { 0xeb, 0x1b, KEY_CHANNELUP }, |
| { 0xeb, 0x1c, KEY_VOLUMEUP }, |
| { 0xeb, 0x1d, KEY_MUTE }, |
| { 0xeb, 0x1e, KEY_VOLUMEDOWN }, |
| { 0xeb, 0x1f, KEY_CHANNELDOWN }, |
| { 0xeb, 0x40, KEY_PAUSE }, |
| { 0xeb, 0x41, KEY_HOME }, |
| { 0xeb, 0x42, KEY_MENU }, /* DVD Menu */ |
| { 0xeb, 0x43, KEY_SUBTITLE }, |
| { 0xeb, 0x44, KEY_TEXT }, /* Teletext */ |
| { 0xeb, 0x45, KEY_DELETE }, |
| { 0xeb, 0x46, KEY_TV }, |
| { 0xeb, 0x47, KEY_DVD }, |
| { 0xeb, 0x48, KEY_STOP }, |
| { 0xeb, 0x49, KEY_VIDEO }, |
| { 0xeb, 0x4a, KEY_AUDIO }, /* Music */ |
| { 0xeb, 0x4b, KEY_SCREEN }, /* Pic */ |
| { 0xeb, 0x4c, KEY_PLAY }, |
| { 0xeb, 0x4d, KEY_BACK }, |
| { 0xeb, 0x4e, KEY_REWIND }, |
| { 0xeb, 0x4f, KEY_FASTFORWARD }, |
| { 0xeb, 0x54, KEY_PREVIOUS }, |
| { 0xeb, 0x58, KEY_RECORD }, |
| { 0xeb, 0x5c, KEY_NEXT }, |
| |
| /* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */ |
| { 0x1e, 0x00, KEY_0 }, |
| { 0x1e, 0x01, KEY_1 }, |
| { 0x1e, 0x02, KEY_2 }, |
| { 0x1e, 0x03, KEY_3 }, |
| { 0x1e, 0x04, KEY_4 }, |
| { 0x1e, 0x05, KEY_5 }, |
| { 0x1e, 0x06, KEY_6 }, |
| { 0x1e, 0x07, KEY_7 }, |
| { 0x1e, 0x08, KEY_8 }, |
| { 0x1e, 0x09, KEY_9 }, |
| { 0x1e, 0x0a, KEY_KPASTERISK }, |
| { 0x1e, 0x0b, KEY_RED }, |
| { 0x1e, 0x0c, KEY_RADIO }, |
| { 0x1e, 0x0d, KEY_MENU }, |
| { 0x1e, 0x0e, KEY_GRAVE }, /* # */ |
| { 0x1e, 0x0f, KEY_MUTE }, |
| { 0x1e, 0x10, KEY_VOLUMEUP }, |
| { 0x1e, 0x11, KEY_VOLUMEDOWN }, |
| { 0x1e, 0x12, KEY_CHANNEL }, |
| { 0x1e, 0x14, KEY_UP }, |
| { 0x1e, 0x15, KEY_DOWN }, |
| { 0x1e, 0x16, KEY_LEFT }, |
| { 0x1e, 0x17, KEY_RIGHT }, |
| { 0x1e, 0x18, KEY_VIDEO }, |
| { 0x1e, 0x19, KEY_AUDIO }, |
| { 0x1e, 0x1a, KEY_MEDIA }, |
| { 0x1e, 0x1b, KEY_EPG }, |
| { 0x1e, 0x1c, KEY_TV }, |
| { 0x1e, 0x1e, KEY_NEXT }, |
| { 0x1e, 0x1f, KEY_BACK }, |
| { 0x1e, 0x20, KEY_CHANNELUP }, |
| { 0x1e, 0x21, KEY_CHANNELDOWN }, |
| { 0x1e, 0x24, KEY_LAST }, /* Skip backwards */ |
| { 0x1e, 0x25, KEY_OK }, |
| { 0x1e, 0x29, KEY_BLUE}, |
| { 0x1e, 0x2e, KEY_GREEN }, |
| { 0x1e, 0x30, KEY_PAUSE }, |
| { 0x1e, 0x32, KEY_REWIND }, |
| { 0x1e, 0x34, KEY_FASTFORWARD }, |
| { 0x1e, 0x35, KEY_PLAY }, |
| { 0x1e, 0x36, KEY_STOP }, |
| { 0x1e, 0x37, KEY_RECORD }, |
| { 0x1e, 0x38, KEY_YELLOW }, |
| { 0x1e, 0x3b, KEY_GOTO }, |
| { 0x1e, 0x3d, KEY_POWER }, |
| |
| /* Key codes for the Leadtek Winfast DTV Dongle */ |
| { 0x00, 0x42, KEY_POWER }, |
| { 0x07, 0x7c, KEY_TUNER }, |
| { 0x0f, 0x4e, KEY_PRINT }, /* PREVIEW */ |
| { 0x08, 0x40, KEY_SCREEN }, /* full screen toggle*/ |
| { 0x0f, 0x71, KEY_DOT }, /* frequency */ |
| { 0x07, 0x43, KEY_0 }, |
| { 0x0c, 0x41, KEY_1 }, |
| { 0x04, 0x43, KEY_2 }, |
| { 0x0b, 0x7f, KEY_3 }, |
| { 0x0e, 0x41, KEY_4 }, |
| { 0x06, 0x43, KEY_5 }, |
| { 0x09, 0x7f, KEY_6 }, |
| { 0x0d, 0x7e, KEY_7 }, |
| { 0x05, 0x7c, KEY_8 }, |
| { 0x0a, 0x40, KEY_9 }, |
| { 0x0e, 0x4e, KEY_CLEAR }, |
| { 0x04, 0x7c, KEY_CHANNEL }, /* show channel number */ |
| { 0x0f, 0x41, KEY_LAST }, /* recall */ |
| { 0x03, 0x42, KEY_MUTE }, |
| { 0x06, 0x4c, KEY_RESERVED }, /* PIP button*/ |
| { 0x01, 0x72, KEY_SHUFFLE }, /* SNAPSHOT */ |
| { 0x0c, 0x4e, KEY_PLAYPAUSE }, /* TIMESHIFT */ |
| { 0x0b, 0x70, KEY_RECORD }, |
| { 0x03, 0x7d, KEY_VOLUMEUP }, |
| { 0x01, 0x7d, KEY_VOLUMEDOWN }, |
| { 0x02, 0x42, KEY_CHANNELUP }, |
| { 0x00, 0x7d, KEY_CHANNELDOWN }, |
| |
| /* Key codes for Nova-TD "credit card" remote control. */ |
| { 0x1d, 0x00, KEY_0 }, |
| { 0x1d, 0x01, KEY_1 }, |
| { 0x1d, 0x02, KEY_2 }, |
| { 0x1d, 0x03, KEY_3 }, |
| { 0x1d, 0x04, KEY_4 }, |
| { 0x1d, 0x05, KEY_5 }, |
| { 0x1d, 0x06, KEY_6 }, |
| { 0x1d, 0x07, KEY_7 }, |
| { 0x1d, 0x08, KEY_8 }, |
| { 0x1d, 0x09, KEY_9 }, |
| { 0x1d, 0x0a, KEY_TEXT }, |
| { 0x1d, 0x0d, KEY_MENU }, |
| { 0x1d, 0x0f, KEY_MUTE }, |
| { 0x1d, 0x10, KEY_VOLUMEUP }, |
| { 0x1d, 0x11, KEY_VOLUMEDOWN }, |
| { 0x1d, 0x12, KEY_CHANNEL }, |
| { 0x1d, 0x14, KEY_UP }, |
| { 0x1d, 0x15, KEY_DOWN }, |
| { 0x1d, 0x16, KEY_LEFT }, |
| { 0x1d, 0x17, KEY_RIGHT }, |
| { 0x1d, 0x1c, KEY_TV }, |
| { 0x1d, 0x1e, KEY_NEXT }, |
| { 0x1d, 0x1f, KEY_BACK }, |
| { 0x1d, 0x20, KEY_CHANNELUP }, |
| { 0x1d, 0x21, KEY_CHANNELDOWN }, |
| { 0x1d, 0x24, KEY_LAST }, |
| { 0x1d, 0x25, KEY_OK }, |
| { 0x1d, 0x30, KEY_PAUSE }, |
| { 0x1d, 0x32, KEY_REWIND }, |
| { 0x1d, 0x34, KEY_FASTFORWARD }, |
| { 0x1d, 0x35, KEY_PLAY }, |
| { 0x1d, 0x36, KEY_STOP }, |
| { 0x1d, 0x37, KEY_RECORD }, |
| { 0x1d, 0x3b, KEY_GOTO }, |
| { 0x1d, 0x3d, KEY_POWER }, |
| }; |
| |
| /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */ |
| static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = { |
| BAND_UHF | BAND_VHF, // band_caps |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup |
| |
| 712, // inv_gain |
| 41, // time_stabiliz |
| |
| 0, // alpha_level |
| 118, // thlock |
| |
| 0, // wbd_inv |
| 4095, // wbd_ref |
| 0, // wbd_sel |
| 0, // wbd_alpha |
| |
| 42598, // agc1_max |
| 17694, // agc1_min |
| 45875, // agc2_max |
| 2621, // agc2_min |
| 0, // agc1_pt1 |
| 76, // agc1_pt2 |
| 139, // agc1_pt3 |
| 52, // agc1_slope1 |
| 59, // agc1_slope2 |
| 107, // agc2_pt1 |
| 172, // agc2_pt2 |
| 57, // agc2_slope1 |
| 70, // agc2_slope2 |
| |
| 21, // alpha_mant |
| 25, // alpha_exp |
| 28, // beta_mant |
| 48, // beta_exp |
| |
| 1, // perform_agc_softsplit |
| { 0, // split_min |
| 107, // split_max |
| 51800, // global_split_min |
| 24700 // global_split_max |
| }, |
| }; |
| |
| static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = { |
| BAND_UHF | BAND_VHF, |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup |
| |
| 712, // inv_gain |
| 41, // time_stabiliz |
| |
| 0, // alpha_level |
| 118, // thlock |
| |
| 0, // wbd_inv |
| 4095, // wbd_ref |
| 0, // wbd_sel |
| 0, // wbd_alpha |
| |
| 42598, // agc1_max |
| 16384, // agc1_min |
| 42598, // agc2_max |
| 0, // agc2_min |
| |
| 0, // agc1_pt1 |
| 137, // agc1_pt2 |
| 255, // agc1_pt3 |
| |
| 0, // agc1_slope1 |
| 255, // agc1_slope2 |
| |
| 0, // agc2_pt1 |
| 0, // agc2_pt2 |
| |
| 0, // agc2_slope1 |
| 41, // agc2_slope2 |
| |
| 15, // alpha_mant |
| 25, // alpha_exp |
| |
| 28, // beta_mant |
| 48, // beta_exp |
| |
| 0, // perform_agc_softsplit |
| }; |
| |
| static struct dibx000_bandwidth_config stk7700p_pll_config = { |
| 60000, 30000, // internal, sampling |
| 1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass |
| 0, 0, 1, 1, 0, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo |
| (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k |
| 60258167, // ifreq |
| 20452225, // timf |
| 30000000, // xtal |
| }; |
| |
| static struct dib7000m_config stk7700p_dib7000m_config = { |
| .dvbt_mode = 1, |
| .output_mpeg2_in_188_bytes = 1, |
| .quartz_direct = 1, |
| |
| .agc_config_count = 1, |
| .agc = &stk7700p_7000m_mt2060_agc_config, |
| .bw = &stk7700p_pll_config, |
| |
| .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, |
| }; |
| |
| static struct dib7000p_config stk7700p_dib7000p_config = { |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 1, |
| .agc = &stk7700p_7000p_mt2060_agc_config, |
| .bw = &stk7700p_pll_config, |
| |
| .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, |
| }; |
| |
| static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_state *st = adap->dev->priv; |
| /* unless there is no real power management in DVB - we leave the device on GPIO6 */ |
| |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50); |
| |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); |
| dib0700_ctrl_clock(adap->dev, 72, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100); |
| |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| |
| st->mt2060_if1[0] = 1220; |
| |
| if (dib7000pc_detection(&adap->dev->i2c_adap)) { |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config); |
| st->is_dib7000pc = 1; |
| } else |
| adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static struct mt2060_config stk7700p_mt2060_config = { |
| 0x60 |
| }; |
| |
| static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; |
| struct dib0700_state *st = adap->dev->priv; |
| struct i2c_adapter *tun_i2c; |
| s8 a; |
| int if1=1220; |
| if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && |
| adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { |
| if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; |
| } |
| if (st->is_dib7000pc) |
| tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); |
| else |
| tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); |
| |
| return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config, |
| if1) == NULL ? -ENODEV : 0; |
| } |
| |
| /* DIB7070 generic */ |
| static struct dibx000_agc_config dib7070_agc_config = { |
| BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup |
| |
| 600, // inv_gain |
| 10, // time_stabiliz |
| |
| 0, // alpha_level |
| 118, // thlock |
| |
| 0, // wbd_inv |
| 3530, // wbd_ref |
| 1, // wbd_sel |
| 5, // wbd_alpha |
| |
| 65535, // agc1_max |
| 0, // agc1_min |
| |
| 65535, // agc2_max |
| 0, // agc2_min |
| |
| 0, // agc1_pt1 |
| 40, // agc1_pt2 |
| 183, // agc1_pt3 |
| 206, // agc1_slope1 |
| 255, // agc1_slope2 |
| 72, // agc2_pt1 |
| 152, // agc2_pt2 |
| 88, // agc2_slope1 |
| 90, // agc2_slope2 |
| |
| 17, // alpha_mant |
| 27, // alpha_exp |
| 23, // beta_mant |
| 51, // beta_exp |
| |
| 0, // perform_agc_softsplit |
| }; |
| |
| static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) |
| { |
| return dib7000p_set_gpio(fe, 8, 0, !onoff); |
| } |
| |
| static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) |
| { |
| return dib7000p_set_gpio(fe, 9, 0, onoff); |
| } |
| |
| static struct dib0070_config dib7070p_dib0070_config[2] = { |
| { |
| .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, |
| .reset = dib7070_tuner_reset, |
| .sleep = dib7070_tuner_sleep, |
| .clock_khz = 12000, |
| .clock_pad_drive = 4 |
| }, { |
| .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, |
| .reset = dib7070_tuner_reset, |
| .sleep = dib7070_tuner_sleep, |
| .clock_khz = 12000, |
| |
| } |
| }; |
| |
| static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep) |
| { |
| struct dvb_usb_adapter *adap = fe->dvb->priv; |
| struct dib0700_adapter_state *state = adap->priv; |
| |
| u16 offset; |
| u8 band = BAND_OF_FREQUENCY(fep->frequency/1000); |
| switch (band) { |
| case BAND_VHF: offset = 950; break; |
| case BAND_UHF: |
| default: offset = 550; break; |
| } |
| deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe)); |
| dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); |
| return state->set_param_save(fe, fep); |
| } |
| |
| static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_adapter_state *st = adap->priv; |
| struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); |
| |
| if (adap->id == 0) { |
| if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL) |
| return -ENODEV; |
| } else { |
| if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL) |
| return -ENODEV; |
| } |
| |
| st->set_param_save = adap->fe->ops.tuner_ops.set_params; |
| adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override; |
| return 0; |
| } |
| |
| static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { |
| 60000, 15000, // internal, sampling |
| 1, 20, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass |
| 0, 0, 1, 1, 2, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo |
| (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k |
| (0 << 25) | 0, // ifreq = 0.000000 MHz |
| 20452225, // timf |
| 12000000, // xtal_hz |
| }; |
| |
| static struct dib7000p_config dib7070p_dib7000p_config = { |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 1, |
| .agc = &dib7070_agc_config, |
| .bw = &dib7070_bw_config_12_mhz, |
| .tuner_is_baseband = 1, |
| .spur_protect = 1, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| |
| .hostbus_diversity = 1, |
| }; |
| |
| /* STK7070P */ |
| static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct usb_device_descriptor *p = &adap->dev->udev->descriptor; |
| if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && |
| p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); |
| else |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| |
| dib0700_ctrl_clock(adap->dev, 72, 1); |
| |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| |
| dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, |
| &dib7070p_dib7000p_config); |
| |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, |
| &dib7070p_dib7000p_config); |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| /* STK7070PD */ |
| static struct dib7000p_config stk7070pd_dib7000p_config[2] = { |
| { |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 1, |
| .agc = &dib7070_agc_config, |
| .bw = &dib7070_bw_config_12_mhz, |
| .tuner_is_baseband = 1, |
| .spur_protect = 1, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| |
| .hostbus_diversity = 1, |
| }, { |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 1, |
| .agc = &dib7070_agc_config, |
| .bw = &dib7070_bw_config_12_mhz, |
| .tuner_is_baseband = 1, |
| .spur_protect = 1, |
| |
| .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| |
| .hostbus_diversity = 1, |
| } |
| }; |
| |
| static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap) |
| { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| |
| dib0700_ctrl_clock(adap->dev, 72, 1); |
| |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| |
| dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, stk7070pd_dib7000p_config); |
| |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]); |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap) |
| { |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]); |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| /* S5H1411 */ |
| static struct s5h1411_config pinnacle_801e_config = { |
| .output_mode = S5H1411_PARALLEL_OUTPUT, |
| .gpio = S5H1411_GPIO_OFF, |
| .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, |
| .qam_if = S5H1411_IF_44000, |
| .vsb_if = S5H1411_IF_44000, |
| .inversion = S5H1411_INVERSION_OFF, |
| .status_mode = S5H1411_DEMODLOCKING |
| }; |
| |
| /* Pinnacle PCTV HD Pro 801e GPIOs map: |
| GPIO0 - currently unknown |
| GPIO1 - xc5000 tuner reset |
| GPIO2 - CX25843 sleep |
| GPIO3 - currently unknown |
| GPIO4 - currently unknown |
| GPIO6 - currently unknown |
| GPIO7 - currently unknown |
| GPIO9 - currently unknown |
| GPIO10 - CX25843 reset |
| */ |
| static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_state *st = adap->dev->priv; |
| |
| /* Make use of the new i2c functions from FW 1.20 */ |
| st->fw_use_new_i2c_api = 1; |
| |
| /* The s5h1411 requires the dib0700 to not be in master mode */ |
| st->disable_streaming_master_mode = 1; |
| |
| /* All msleep values taken from Windows USB trace */ |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); |
| dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0); |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); |
| msleep(400); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| msleep(60); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); |
| msleep(30); |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); |
| dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0); |
| msleep(30); |
| |
| /* Put the CX25843 to sleep for now since we're in digital mode */ |
| dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); |
| |
| /* GPIOs are initialized, do the attach */ |
| adap->fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config, |
| &adap->dev->i2c_adap); |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static int dib0700_xc5000_tuner_callback(void *priv, int component, |
| int command, int arg) |
| { |
| struct dvb_usb_adapter *adap = priv; |
| |
| if (command == XC5000_TUNER_RESET) { |
| /* Reset the tuner */ |
| dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0); |
| msleep(330); /* from Windows USB trace */ |
| dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1); |
| msleep(330); /* from Windows USB trace */ |
| } else { |
| err("xc5000: unknown tuner callback command: %d\n", command); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static struct xc5000_config s5h1411_xc5000_tunerconfig = { |
| .i2c_address = 0x64, |
| .if_khz = 5380, |
| }; |
| |
| static int xc5000_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| /* FIXME: generalize & move to common area */ |
| adap->fe->callback = dib0700_xc5000_tuner_callback; |
| |
| return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap, |
| &s5h1411_xc5000_tunerconfig) |
| == NULL ? -ENODEV : 0; |
| } |
| |
| /* DVB-USB and USB stuff follows */ |
| struct usb_device_id dib0700_usb_id_table[] = { |
| /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) }, |
| { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) }, |
| /* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) }, |
| { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) }, |
| { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) }, |
| { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) }, |
| /* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) }, |
| { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) }, |
| { USB_DEVICE(USB_VID_TERRATEC, |
| USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) }, |
| { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) }, |
| /* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) }, |
| { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) }, |
| { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) }, |
| { USB_DEVICE(USB_VID_PINNACLE, |
| USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) }, |
| { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) }, |
| /* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) }, |
| { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) }, |
| { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) }, |
| { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) }, |
| { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) }, |
| /* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) }, |
| { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) }, |
| { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) }, |
| { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) }, |
| /* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) }, |
| { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) }, |
| { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) }, |
| { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) }, |
| { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) }, |
| /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, |
| { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, |
| { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, |
| { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, |
| /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, |
| { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, |
| { 0 } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); |
| |
| #define DIB0700_DEFAULT_DEVICE_PROPERTIES \ |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, \ |
| .usb_ctrl = DEVICE_SPECIFIC, \ |
| .firmware = "dvb-usb-dib0700-1.20.fw", \ |
| .download_firmware = dib0700_download_firmware, \ |
| .no_reconnect = 1, \ |
| .size_of_priv = sizeof(struct dib0700_state), \ |
| .i2c_algo = &dib0700_i2c_algo, \ |
| .identify_state = dib0700_identify_state |
| |
| #define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \ |
| .streaming_ctrl = dib0700_streaming_ctrl, \ |
| .stream = { \ |
| .type = USB_BULK, \ |
| .count = 4, \ |
| .endpoint = ep, \ |
| .u = { \ |
| .bulk = { \ |
| .buffersize = 39480, \ |
| } \ |
| } \ |
| } |
| |
| struct dvb_usb_device_properties dib0700_devices[] = { |
| { |
| DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .frontend_attach = stk7700p_frontend_attach, |
| .tuner_attach = stk7700p_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| }, |
| }, |
| |
| .num_device_descs = 8, |
| .devices = { |
| { "DiBcom STK7700P reference design", |
| { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-T Stick", |
| { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL }, |
| { NULL }, |
| }, |
| { "AVerMedia AVerTV DVB-T Volar", |
| { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] }, |
| { NULL }, |
| }, |
| { "Compro Videomate U500", |
| { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] }, |
| { NULL }, |
| }, |
| { "Uniwill STK7700P based (Hama and others)", |
| { &dib0700_usb_id_table[7], NULL }, |
| { NULL }, |
| }, |
| { "Leadtek Winfast DTV Dongle (STK7700P based)", |
| { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] }, |
| { NULL }, |
| }, |
| { "AVerMedia AVerTV DVB-T Express", |
| { &dib0700_usb_id_table[20] }, |
| { NULL }, |
| }, |
| { "Gigabyte U7000", |
| { &dib0700_usb_id_table[21], NULL }, |
| { NULL }, |
| } |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 2, |
| .adapter = { |
| { |
| .frontend_attach = bristol_frontend_attach, |
| .tuner_attach = bristol_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| }, { |
| .frontend_attach = bristol_frontend_attach, |
| .tuner_attach = bristol_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x03), |
| } |
| }, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "Hauppauge Nova-T 500 Dual DVB-T", |
| { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL }, |
| { NULL }, |
| }, |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 2, |
| .adapter = { |
| { |
| .frontend_attach = stk7700d_frontend_attach, |
| .tuner_attach = stk7700d_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| }, { |
| .frontend_attach = stk7700d_frontend_attach, |
| .tuner_attach = stk7700d_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x03), |
| } |
| }, |
| |
| .num_device_descs = 4, |
| .devices = { |
| { "Pinnacle PCTV 2000e", |
| { &dib0700_usb_id_table[11], NULL }, |
| { NULL }, |
| }, |
| { "Terratec Cinergy DT XS Diversity", |
| { &dib0700_usb_id_table[12], NULL }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity", |
| { &dib0700_usb_id_table[13], NULL }, |
| { NULL }, |
| }, |
| { "DiBcom STK7700D reference design", |
| { &dib0700_usb_id_table[14], NULL }, |
| { NULL }, |
| } |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .frontend_attach = stk7700P2_frontend_attach, |
| .tuner_attach = stk7700d_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| }, |
| }, |
| |
| .num_device_descs = 2, |
| .devices = { |
| { "ASUS My Cinema U3000 Mini DVBT Tuner", |
| { &dib0700_usb_id_table[23], NULL }, |
| { NULL }, |
| }, |
| { "Yuan EC372S", |
| { &dib0700_usb_id_table[31], NULL }, |
| { NULL }, |
| } |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .frontend_attach = stk7070p_frontend_attach, |
| .tuner_attach = dib7070p_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = sizeof(struct dib0700_adapter_state), |
| }, |
| }, |
| |
| .num_device_descs = 9, |
| .devices = { |
| { "DiBcom STK7070P reference design", |
| { &dib0700_usb_id_table[15], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle PCTV DVB-T Flash Stick", |
| { &dib0700_usb_id_table[16], NULL }, |
| { NULL }, |
| }, |
| { "Artec T14BR DVB-T", |
| { &dib0700_usb_id_table[22], NULL }, |
| { NULL }, |
| }, |
| { "ASUS My Cinema U3100 Mini DVBT Tuner", |
| { &dib0700_usb_id_table[24], NULL }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-T Stick", |
| { &dib0700_usb_id_table[25], NULL }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-T MyTV.t", |
| { &dib0700_usb_id_table[26], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle PCTV 72e", |
| { &dib0700_usb_id_table[29], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle PCTV 73e", |
| { &dib0700_usb_id_table[30], NULL }, |
| { NULL }, |
| }, |
| { "Terratec Cinergy T USB XXS", |
| { &dib0700_usb_id_table[33], NULL }, |
| { NULL }, |
| }, |
| }, |
| |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 2, |
| .adapter = { |
| { |
| .frontend_attach = stk7070pd_frontend_attach0, |
| .tuner_attach = dib7070p_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = sizeof(struct dib0700_adapter_state), |
| }, { |
| .frontend_attach = stk7070pd_frontend_attach1, |
| .tuner_attach = dib7070p_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x03), |
| |
| .size_of_priv = sizeof(struct dib0700_adapter_state), |
| } |
| }, |
| |
| .num_device_descs = 4, |
| .devices = { |
| { "DiBcom STK7070PD reference design", |
| { &dib0700_usb_id_table[17], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle PCTV Dual DVB-T Diversity Stick", |
| { &dib0700_usb_id_table[18], NULL }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-TD Stick (52009)", |
| { &dib0700_usb_id_table[35], NULL }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-TD-500 (84xxx)", |
| { &dib0700_usb_id_table[36], NULL }, |
| { NULL }, |
| } |
| } |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .frontend_attach = stk7700ph_frontend_attach, |
| .tuner_attach = stk7700ph_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = sizeof(struct |
| dib0700_adapter_state), |
| }, |
| }, |
| |
| .num_device_descs = 5, |
| .devices = { |
| { "Terratec Cinergy HT USB XE", |
| { &dib0700_usb_id_table[27], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle Expresscard 320cx", |
| { &dib0700_usb_id_table[28], NULL }, |
| { NULL }, |
| }, |
| { "Terratec Cinergy HT Express", |
| { &dib0700_usb_id_table[32], NULL }, |
| { NULL }, |
| }, |
| { "Gigabyte U8000-RH", |
| { &dib0700_usb_id_table[37], NULL }, |
| { NULL }, |
| }, |
| { "YUAN High-Tech STK7700PH", |
| { &dib0700_usb_id_table[38], NULL }, |
| { NULL }, |
| }, |
| { "Asus My Cinema-U3000Hybrid", |
| { &dib0700_usb_id_table[39], NULL }, |
| { NULL }, |
| }, |
| }, |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .frontend_attach = s5h1411_frontend_attach, |
| .tuner_attach = xc5000_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| |
| .size_of_priv = sizeof(struct |
| dib0700_adapter_state), |
| }, |
| }, |
| |
| .num_device_descs = 2, |
| .devices = { |
| { "Pinnacle PCTV HD Pro USB Stick", |
| { &dib0700_usb_id_table[40], NULL }, |
| { NULL }, |
| }, |
| { "Pinnacle PCTV HD USB Stick", |
| { &dib0700_usb_id_table[41], NULL }, |
| { NULL }, |
| }, |
| }, |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_key_map = dib0700_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), |
| .rc_query = dib0700_rc_query |
| }, |
| }; |
| |
| int dib0700_device_count = ARRAY_SIZE(dib0700_devices); |