| /* |
| * Copyright (c) 2008 Atheros Communications Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * Implementation of transmit path. |
| */ |
| |
| #include "core.h" |
| |
| #define BITS_PER_BYTE 8 |
| #define OFDM_PLCP_BITS 22 |
| #define HT_RC_2_MCS(_rc) ((_rc) & 0x0f) |
| #define HT_RC_2_STREAMS(_rc) ((((_rc) & 0x78) >> 3) + 1) |
| #define L_STF 8 |
| #define L_LTF 8 |
| #define L_SIG 4 |
| #define HT_SIG 8 |
| #define HT_STF 4 |
| #define HT_LTF(_ns) (4 * (_ns)) |
| #define SYMBOL_TIME(_ns) ((_ns) << 2) /* ns * 4 us */ |
| #define SYMBOL_TIME_HALFGI(_ns) (((_ns) * 18 + 4) / 5) /* ns * 3.6 us */ |
| #define NUM_SYMBOLS_PER_USEC(_usec) (_usec >> 2) |
| #define NUM_SYMBOLS_PER_USEC_HALFGI(_usec) (((_usec*5)-4)/18) |
| |
| #define OFDM_SIFS_TIME 16 |
| |
| static u32 bits_per_symbol[][2] = { |
| /* 20MHz 40MHz */ |
| { 26, 54 }, /* 0: BPSK */ |
| { 52, 108 }, /* 1: QPSK 1/2 */ |
| { 78, 162 }, /* 2: QPSK 3/4 */ |
| { 104, 216 }, /* 3: 16-QAM 1/2 */ |
| { 156, 324 }, /* 4: 16-QAM 3/4 */ |
| { 208, 432 }, /* 5: 64-QAM 2/3 */ |
| { 234, 486 }, /* 6: 64-QAM 3/4 */ |
| { 260, 540 }, /* 7: 64-QAM 5/6 */ |
| { 52, 108 }, /* 8: BPSK */ |
| { 104, 216 }, /* 9: QPSK 1/2 */ |
| { 156, 324 }, /* 10: QPSK 3/4 */ |
| { 208, 432 }, /* 11: 16-QAM 1/2 */ |
| { 312, 648 }, /* 12: 16-QAM 3/4 */ |
| { 416, 864 }, /* 13: 64-QAM 2/3 */ |
| { 468, 972 }, /* 14: 64-QAM 3/4 */ |
| { 520, 1080 }, /* 15: 64-QAM 5/6 */ |
| }; |
| |
| #define IS_HT_RATE(_rate) ((_rate) & 0x80) |
| |
| /* |
| * Insert a chain of ath_buf (descriptors) on a multicast txq |
| * but do NOT start tx DMA on this queue. |
| * NB: must be called with txq lock held |
| */ |
| |
| static void ath_tx_mcastqaddbuf(struct ath_softc *sc, |
| struct ath_txq *txq, |
| struct list_head *head) |
| { |
| struct ath_hal *ah = sc->sc_ah; |
| struct ath_buf *bf; |
| |
| if (list_empty(head)) |
| return; |
| |
| /* |
| * Insert the frame on the outbound list and |
| * pass it on to the hardware. |
| */ |
| bf = list_first_entry(head, struct ath_buf, list); |
| |
| /* |
| * The CAB queue is started from the SWBA handler since |
| * frames only go out on DTIM and to avoid possible races. |
| */ |
| ath9k_hw_set_interrupts(ah, 0); |
| |
| /* |
| * If there is anything in the mcastq, we want to set |
| * the "more data" bit in the last item in the queue to |
| * indicate that there is "more data". It makes sense to add |
| * it here since you are *always* going to have |
| * more data when adding to this queue, no matter where |
| * you call from. |
| */ |
| |
| if (txq->axq_depth) { |
| struct ath_buf *lbf; |
| struct ieee80211_hdr *hdr; |
| |
| /* |
| * Add the "more data flag" to the last frame |
| */ |
| |
| lbf = list_entry(txq->axq_q.prev, struct ath_buf, list); |
| hdr = (struct ieee80211_hdr *) |
| ((struct sk_buff *)(lbf->bf_mpdu))->data; |
| hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); |
| } |
| |
| /* |
| * Now, concat the frame onto the queue |
| */ |
| list_splice_tail_init(head, &txq->axq_q); |
| txq->axq_depth++; |
| txq->axq_totalqueued++; |
| txq->axq_linkbuf = list_entry(txq->axq_q.prev, struct ath_buf, list); |
| |
| DPRINTF(sc, ATH_DBG_QUEUE, |
| "%s: txq depth = %d\n", __func__, txq->axq_depth); |
| if (txq->axq_link != NULL) { |
| *txq->axq_link = bf->bf_daddr; |
| DPRINTF(sc, ATH_DBG_XMIT, |
| "%s: link[%u](%p)=%llx (%p)\n", |
| __func__, |
| txq->axq_qnum, txq->axq_link, |
| ito64(bf->bf_daddr), bf->bf_desc); |
| } |
| txq->axq_link = &(bf->bf_lastbf->bf_desc->ds_link); |
| ath9k_hw_set_interrupts(ah, sc->sc_imask); |
| } |
| |
| /* |
| * Insert a chain of ath_buf (descriptors) on a txq and |
| * assume the descriptors are already chained together by caller. |
| * NB: must be called with txq lock held |
| */ |
| |
| static void ath_tx_txqaddbuf(struct ath_softc *sc, |
| struct ath_txq *txq, struct list_head *head) |
| { |
| struct ath_hal *ah = sc->sc_ah; |
| struct ath_buf *bf; |
| /* |
| * Insert the frame on the outbound list and |
| * pass it on to the hardware. |
| */ |
| |
| if (list_empty(head)) |
| return; |
| |
| bf = list_first_entry(head, struct ath_buf, list); |
| |
| list_splice_tail_init(head, &txq->axq_q); |
| txq->axq_depth++; |
| txq->axq_totalqueued++; |
| txq->axq_linkbuf = list_entry(txq->axq_q.prev, struct ath_buf, list); |
| |
| DPRINTF(sc, ATH_DBG_QUEUE, |
| "%s: txq depth = %d\n", __func__, txq->axq_depth); |
| |
| if (txq->axq_link == NULL) { |
| ath9k_hw_puttxbuf(ah, txq->axq_qnum, bf->bf_daddr); |
| DPRINTF(sc, ATH_DBG_XMIT, |
| "%s: TXDP[%u] = %llx (%p)\n", |
| __func__, txq->axq_qnum, |
| ito64(bf->bf_daddr), bf->bf_desc); |
| } else { |
| *txq->axq_link = bf->bf_daddr; |
| DPRINTF(sc, ATH_DBG_XMIT, "%s: link[%u] (%p)=%llx (%p)\n", |
| __func__, |
| txq->axq_qnum, txq->axq_link, |
| ito64(bf->bf_daddr), bf->bf_desc); |
| } |
| txq->axq_link = &(bf->bf_lastbf->bf_desc->ds_link); |
| ath9k_hw_txstart(ah, txq->axq_qnum); |
| } |
| |
| /* Get transmit rate index using rate in Kbps */ |
| |
| static int ath_tx_findindex(const struct ath9k_rate_table *rt, int rate) |
| { |
| int i; |
| int ndx = 0; |
| |
| for (i = 0; i < rt->rateCount; i++) { |
| if (rt->info[i].rateKbps == rate) { |
| ndx = i; |
| break; |
| } |
| } |
| |
| return ndx; |
| } |
| |
| /* Check if it's okay to send out aggregates */ |
| |
| static int ath_aggr_query(struct ath_softc *sc, |
| struct ath_node *an, u8 tidno) |
| { |
| struct ath_atx_tid *tid; |
| tid = ATH_AN_2_TID(an, tidno); |
| |
| if (tid->addba_exchangecomplete || tid->addba_exchangeinprogress) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static enum ath9k_pkt_type get_hal_packet_type(struct ieee80211_hdr *hdr) |
| { |
| enum ath9k_pkt_type htype; |
| __le16 fc; |
| |
| fc = hdr->frame_control; |
| |
| /* Calculate Atheros packet type from IEEE80211 packet header */ |
| |
| if (ieee80211_is_beacon(fc)) |
| htype = ATH9K_PKT_TYPE_BEACON; |
| else if (ieee80211_is_probe_resp(fc)) |
| htype = ATH9K_PKT_TYPE_PROBE_RESP; |
| else if (ieee80211_is_atim(fc)) |
| htype = ATH9K_PKT_TYPE_ATIM; |
| else if (ieee80211_is_pspoll(fc)) |
| htype = ATH9K_PKT_TYPE_PSPOLL; |
| else |
| htype = ATH9K_PKT_TYPE_NORMAL; |
| |
| return htype; |
| } |
| |
| static void fill_min_rates(struct sk_buff *skb, struct ath_tx_control *txctl) |
| { |
| struct ieee80211_hdr *hdr; |
| struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); |
| struct ath_tx_info_priv *tx_info_priv; |
| __le16 fc; |
| |
| hdr = (struct ieee80211_hdr *)skb->data; |
| fc = hdr->frame_control; |
| tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; |
| |
| if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc)) { |
| txctl->use_minrate = 1; |
| txctl->min_rate = tx_info_priv->min_rate; |
| } else if (ieee80211_is_data(fc)) { |
| if (ieee80211_is_nullfunc(fc) || |
| /* Port Access Entity (IEEE 802.1X) */ |
| (skb->protocol == cpu_to_be16(0x888E))) { |
| txctl->use_minrate = 1; |
| txctl->min_rate = tx_info_priv->min_rate; |
| } |
| if (is_multicast_ether_addr(hdr->addr1)) |
| txctl->mcast_rate = tx_info_priv->min_rate; |
| } |
| |
| } |
| |
| /* This function will setup additional txctl information, mostly rate stuff */ |
| /* FIXME: seqno, ps */ |
| static int ath_tx_prepare(struct ath_softc *sc, |
| struct sk_buff *skb, |
| struct ath_tx_control *txctl) |
| { |
| struct ieee80211_hw *hw = sc->hw; |
| struct ieee80211_hdr *hdr; |
| struct ath_rc_series *rcs; |
| struct ath_txq *txq = NULL; |
| const struct ath9k_rate_table *rt; |
| struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); |
| struct ath_tx_info_priv *tx_info_priv; |
| int hdrlen; |
| u8 rix, antenna; |
| __le16 fc; |
| u8 *qc; |
| |
| memset(txctl, 0, sizeof(struct ath_tx_control)); |
| |
| txctl->dev = sc; |
| hdr = (struct ieee80211_hdr *)skb->data; |
| hdrlen = ieee80211_get_hdrlen_from_skb(skb); |
| fc = hdr->frame_control; |
| |
| rt = sc->sc_currates; |
| BUG_ON(!rt); |
| |
| /* Fill misc fields */ |
| |
| spin_lock_bh(&sc->node_lock); |
| txctl->an = ath_node_get(sc, hdr->addr1); |
| /* create a temp node, if the node is not there already */ |
| if (!txctl->an) |
| txctl->an = ath_node_attach(sc, hdr->addr1, 0); |
| spin_unlock_bh(&sc->node_lock); |
| |
| if (ieee80211_is_data_qos(fc)) { |
| qc = ieee80211_get_qos_ctl(hdr); |
| txctl->tidno = qc[0] & 0xf; |
| } |
| |
| txctl->if_id = 0; |
| txctl->nextfraglen = 0; |
| txctl->frmlen = skb->len + FCS_LEN - (hdrlen & 3); |
| txctl->txpower = MAX_RATE_POWER; /* FIXME */ |
| |
| /* Fill Key related fields */ |
| |
| txctl->keytype = ATH9K_KEY_TYPE_CLEAR; |
| txctl->keyix = ATH9K_TXKEYIX_INVALID; |
| |
| if (tx_info->control.hw_key) { |
| txctl->keyix = tx_info->control.hw_key->hw_key_idx; |
| txctl->frmlen += tx_info->control.icv_len; |
| |
| if (tx_info->control.hw_key->alg == ALG_WEP) |
| txctl->keytype = ATH9K_KEY_TYPE_WEP; |
| else if (tx_info->control.hw_key->alg == ALG_TKIP) |
| txctl->keytype = ATH9K_KEY_TYPE_TKIP; |
| else if (tx_info->control.hw_key->alg == ALG_CCMP) |
| txctl->keytype = ATH9K_KEY_TYPE_AES; |
| } |
| |
| /* Fill packet type */ |
| |
| txctl->atype = get_hal_packet_type(hdr); |
| |
| /* Fill qnum */ |
| |
| txctl->qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc); |
| txq = &sc->sc_txq[txctl->qnum]; |
| spin_lock_bh(&txq->axq_lock); |
| |
| /* Try to avoid running out of descriptors */ |
| if (txq->axq_depth >= (ATH_TXBUF - 20)) { |
| DPRINTF(sc, ATH_DBG_FATAL, |
| "%s: TX queue: %d is full, depth: %d\n", |
| __func__, |
| txctl->qnum, |
| txq->axq_depth); |
| ieee80211_stop_queue(hw, skb_get_queue_mapping(skb)); |
| txq->stopped = 1; |
| spin_unlock_bh(&txq->axq_lock); |
| return -1; |
| } |
| |
| spin_unlock_bh(&txq->axq_lock); |
| |
| /* Fill rate */ |
| |
| fill_min_rates(skb, txctl); |
| |
| /* Fill flags */ |
| |
| txctl->flags = ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */ |
| |
| if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) |
| txctl->flags |= ATH9K_TXDESC_NOACK; |
| if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) |
| txctl->flags |= ATH9K_TXDESC_RTSENA; |
| |
| /* |
| * Setup for rate calculations. |
| */ |
| tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; |
| rcs = tx_info_priv->rcs; |
| |
| if (ieee80211_is_data(fc) && !txctl->use_minrate) { |
| |
| /* Enable HT only for DATA frames and not for EAPOL */ |
| txctl->ht = (hw->conf.ht_conf.ht_supported && |
| (tx_info->flags & IEEE80211_TX_CTL_AMPDU)); |
| |
| if (is_multicast_ether_addr(hdr->addr1)) { |
| rcs[0].rix = (u8) |
| ath_tx_findindex(rt, txctl->mcast_rate); |
| |
| /* |
| * mcast packets are not re-tried. |
| */ |
| rcs[0].tries = 1; |
| } |
| /* For HT capable stations, we save tidno for later use. |
| * We also override seqno set by upper layer with the one |
| * in tx aggregation state. |
| * |
| * First, the fragmentation stat is determined. |
| * If fragmentation is on, the sequence number is |
| * not overridden, since it has been |
| * incremented by the fragmentation routine. |
| */ |
| if (likely(!(txctl->flags & ATH9K_TXDESC_FRAG_IS_ON)) && |
| txctl->ht && sc->sc_txaggr) { |
| struct ath_atx_tid *tid; |
| |
| tid = ATH_AN_2_TID(txctl->an, txctl->tidno); |
| |
| hdr->seq_ctrl = cpu_to_le16(tid->seq_next << |
| IEEE80211_SEQ_SEQ_SHIFT); |
| txctl->seqno = tid->seq_next; |
| INCR(tid->seq_next, IEEE80211_SEQ_MAX); |
| } |
| } else { |
| /* for management and control frames, |
| * or for NULL and EAPOL frames */ |
| if (txctl->min_rate) |
| rcs[0].rix = ath_rate_findrateix(sc, txctl->min_rate); |
| else |
| rcs[0].rix = 0; |
| rcs[0].tries = ATH_MGT_TXMAXTRY; |
| } |
| rix = rcs[0].rix; |
| |
| /* |
| * Calculate duration. This logically belongs in the 802.11 |
| * layer but it lacks sufficient information to calculate it. |
| */ |
| if ((txctl->flags & ATH9K_TXDESC_NOACK) == 0 && !ieee80211_is_ctl(fc)) { |
| u16 dur; |
| /* |
| * XXX not right with fragmentation. |
| */ |
| if (sc->sc_flags & ATH_PREAMBLE_SHORT) |
| dur = rt->info[rix].spAckDuration; |
| else |
| dur = rt->info[rix].lpAckDuration; |
| |
| if (le16_to_cpu(hdr->frame_control) & |
| IEEE80211_FCTL_MOREFRAGS) { |
| dur += dur; /* Add additional 'SIFS + ACK' */ |
| |
| /* |
| ** Compute size of next fragment in order to compute |
| ** durations needed to update NAV. |
| ** The last fragment uses the ACK duration only. |
| ** Add time for next fragment. |
| */ |
| dur += ath9k_hw_computetxtime(sc->sc_ah, rt, |
| txctl->nextfraglen, |
| rix, sc->sc_flags & ATH_PREAMBLE_SHORT); |
| } |
| |
| if (ieee80211_has_morefrags(fc) || |
| (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) { |
| /* |
| ** Force hardware to use computed duration for next |
| ** fragment by disabling multi-rate retry, which |
| ** updates duration based on the multi-rate |
| ** duration table. |
| */ |
| rcs[1].tries = rcs[2].tries = rcs[3].tries = 0; |
| rcs[1].rix = rcs[2].rix = rcs[3].rix = 0; |
| /* reset tries but keep rate index */ |
| rcs[0].tries = ATH_TXMAXTRY; |
| } |
| |
| hdr->duration_id = cpu_to_le16(dur); |
| } |
| |
| /* |
| * Determine if a tx interrupt should be generated for |
| * this descriptor. We take a tx interrupt to reap |
| * descriptors when the h/w hits an EOL condition or |
| * when the descriptor is specifically marked to generate |
| * an interrupt. We periodically mark descriptors in this |
| * way to insure timely replenishing of the supply needed |
| * for sending frames. Defering interrupts reduces system |
| * load and potentially allows more concurrent work to be |
| * done but if done to aggressively can cause senders to |
| * backup. |
| * |
| * NB: use >= to deal with sc_txintrperiod changing |
| * dynamically through sysctl. |
| */ |
| spin_lock_bh(&txq->axq_lock); |
| if ((++txq->axq_intrcnt >= sc->sc_txintrperiod)) { |
| txctl->flags |= ATH9K_TXDESC_INTREQ; |
| txq->axq_intrcnt = 0; |
| } |
| spin_unlock_bh(&txq->axq_lock); |
| |
| if (is_multicast_ether_addr(hdr->addr1)) { |
| antenna = sc->sc_mcastantenna + 1; |
| sc->sc_mcastantenna = (sc->sc_mcastantenna + 1) & 0x1; |
| } else |
| antenna = sc->sc_txantenna; |
| |
| #ifdef USE_LEGACY_HAL |
| txctl->antenna = antenna; |
| #endif |
| return 0; |
| } |
| |
| /* To complete a chain of buffers associated a frame */ |
| |
| static void ath_tx_complete_buf(struct ath_softc *sc, |
| struct ath_buf *bf, |
| struct list_head *bf_q, |
| int txok, int sendbar) |
| { |
| struct sk_buff *skb = bf->bf_mpdu; |
| struct ath_xmit_status tx_status; |
| dma_addr_t *pa; |
| |
| /* |
| * Set retry information. |
| * NB: Don't use the information in the descriptor, because the frame |
| * could be software retried. |
| */ |
| tx_status.retries = bf->bf_retries; |
| tx_status.flags = 0; |
| |
| if (sendbar) |
| tx_status.flags = ATH_TX_BAR; |
| |
| if (!txok) { |
| tx_status.flags |= ATH_TX_ERROR; |
| |
| if (bf->bf_isxretried) |
| tx_status.flags |= ATH_TX_XRETRY; |
| } |
| /* Unmap this frame */ |
| pa = get_dma_mem_context(bf, bf_dmacontext); |
| pci_unmap_single(sc->pdev, |
| *pa, |
| skb->len, |
| PCI_DMA_TODEVICE); |
| /* complete this frame */ |
| ath_tx_complete(sc, skb, &tx_status, bf->bf_node); |
| |
| /* |
| * Return the list of ath_buf of this mpdu to free queue |
| */ |
| spin_lock_bh(&sc->sc_txbuflock); |
| list_splice_tail_init(bf_q, &sc->sc_txbuf); |
| spin_unlock_bh(&sc->sc_txbuflock); |
| } |
| |
| /* |
| * queue up a dest/ac pair for tx scheduling |
| * NB: must be called with txq lock held |
| */ |
| |
| static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid) |
| { |
| struct ath_atx_ac *ac = tid->ac; |
| |
| /* |
| * if tid is paused, hold off |
| */ |
| if (tid->paused) |
| return; |
| |
| /* |
| * add tid to ac atmost once |
| */ |
| if (tid->sched) |
| return; |
| |
| tid->sched = true; |
| list_add_tail(&tid->list, &ac->tid_q); |
| |
| /* |
| * add node ac to txq atmost once |
| */ |
| if (ac->sched) |
| return; |
| |
| ac->sched = true; |
| list_add_tail(&ac->list, &txq->axq_acq); |
| } |
| |
| /* pause a tid */ |
| |
| static void ath_tx_pause_tid(struct ath_softc *sc, struct ath_atx_tid *tid) |
| { |
| struct ath_txq *txq = &sc->sc_txq[tid->ac->qnum]; |
| |
| spin_lock_bh(&txq->axq_lock); |
| |
| tid->paused++; |
| |
| spin_unlock_bh(&txq->axq_lock); |
| } |
| |
| /* resume a tid and schedule aggregate */ |
| |
| void ath_tx_resume_tid(struct ath_softc *sc, struct ath_atx_tid *tid) |
| { |
| struct ath_txq *txq = &sc->sc_txq[tid->ac->qnum]; |
| |
| ASSERT(tid->paused > 0); |
| spin_lock_bh(&txq->axq_lock); |
| |
| tid->paused--; |
| |
| if (tid->paused > 0) |
| goto unlock; |
| |
| if (list_empty(&tid->buf_q)) |
| goto unlock; |
| |
| /* |
| * Add this TID to scheduler and try to send out aggregates |
| */ |
| ath_tx_queue_tid(txq, tid); |
| ath_txq_schedule(sc, txq); |
| unlock: |
| spin_unlock_bh(&txq->axq_lock); |
| } |
| |
| /* Compute the number of bad frames */ |
| |
| static int ath_tx_num_badfrms(struct ath_softc *sc, |
| struct ath_buf *bf, int txok) |
| { |
| struct ath_node *an = bf->bf_node; |
| int isnodegone = (an->an_flags & ATH_NODE_CLEAN); |
| struct ath_buf *bf_last = bf->bf_lastbf; |
| struct ath_desc *ds = bf_last->bf_desc; |
| u16 seq_st = 0; |
| u32 ba[WME_BA_BMP_SIZE >> 5]; |
| int ba_index; |
| int nbad = 0; |
| int isaggr = 0; |
| |
| if (isnodegone || ds->ds_txstat.ts_flags == ATH9K_TX_SW_ABORTED) |
| return 0; |
| |
| isaggr = bf->bf_isaggr; |
| if (isaggr) { |
| seq_st = ATH_DS_BA_SEQ(ds); |
| memcpy(ba, ATH_DS_BA_BITMAP(ds), WME_BA_BMP_SIZE >> 3); |
| } |
| |
| while (bf) { |
| ba_index = ATH_BA_INDEX(seq_st, bf->bf_seqno); |
| if (!txok || (isaggr && !ATH_BA_ISSET(ba, ba_index))) |
| nbad++; |
| |
| bf = bf->bf_next; |
| } |
| |
| return nbad; |
| } |
| |
| static void ath_tx_set_retry(struct ath_softc *sc, struct ath_buf *bf) |
| { |
| struct sk_buff *skb; |
| struct ieee80211_hdr *hdr; |
| |
| bf->bf_isretried = 1; |
| bf->bf_retries++; |
| |
| skb = bf->bf_mpdu; |
| hdr = (struct ieee80211_hdr *)skb->data; |
| hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_RETRY); |
| } |
| |
| /* Update block ack window */ |
| |
| static void ath_tx_update_baw(struct ath_softc *sc, |
| struct ath_atx_tid *tid, int seqno) |
| { |
| int index, cindex; |
| |
| index = ATH_BA_INDEX(tid->seq_start, seqno); |
| cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1); |
| |
| tid->tx_buf[cindex] = NULL; |
| |
| while (tid->baw_head != tid->baw_tail && !tid->tx_buf[tid->baw_head]) { |
| INCR(tid->seq_start, IEEE80211_SEQ_MAX); |
| INCR(tid->baw_head, ATH_TID_MAX_BUFS); |
| } |
| } |
| |
| /* |
| * ath_pkt_dur - compute packet duration (NB: not NAV) |
| * |
| * rix - rate index |
| * pktlen - total bytes (delims + data + fcs + pads + pad delims) |
| * width - 0 for 20 MHz, 1 for 40 MHz |
| * half_gi - to use 4us v/s 3.6 us for symbol time |
| */ |
| |
| static u32 ath_pkt_duration(struct ath_softc *sc, |
| u8 rix, |
| struct ath_buf *bf, |
| int width, |
| int half_gi, |
| bool shortPreamble) |
| { |
| const struct ath9k_rate_table *rt = sc->sc_currates; |
| u32 nbits, nsymbits, duration, nsymbols; |
| u8 rc; |
| int streams, pktlen; |
| |
| pktlen = bf->bf_isaggr ? bf->bf_al : bf->bf_frmlen; |
| rc = rt->info[rix].rateCode; |
| |
| /* |
| * for legacy rates, use old function to compute packet duration |
| */ |
| if (!IS_HT_RATE(rc)) |
| return ath9k_hw_computetxtime(sc->sc_ah, |
| rt, |
| pktlen, |
| rix, |
| shortPreamble); |
| /* |
| * find number of symbols: PLCP + data |
| */ |
| nbits = (pktlen << 3) + OFDM_PLCP_BITS; |
| nsymbits = bits_per_symbol[HT_RC_2_MCS(rc)][width]; |
| nsymbols = (nbits + nsymbits - 1) / nsymbits; |
| |
| if (!half_gi) |
| duration = SYMBOL_TIME(nsymbols); |
| else |
| duration = SYMBOL_TIME_HALFGI(nsymbols); |
| |
| /* |
| * addup duration for legacy/ht training and signal fields |
| */ |
| streams = HT_RC_2_STREAMS(rc); |
| duration += L_STF + L_LTF + L_SIG + HT_SIG + HT_STF + HT_LTF(streams); |
| return duration; |
| } |
| |
| /* Rate module function to set rate related fields in tx descriptor */ |
| |
| static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) |
| { |
| struct ath_hal *ah = sc->sc_ah; |
| const struct ath9k_rate_table *rt; |
| struct ath_desc *ds = bf->bf_desc; |
| struct ath_desc *lastds = bf->bf_lastbf->bf_desc; |
| struct ath9k_11n_rate_series series[4]; |
| int i, flags, rtsctsena = 0, dynamic_mimops = 0; |
| u32 ctsduration = 0; |
| u8 rix = 0, cix, ctsrate = 0; |
| u32 aggr_limit_with_rts = sc->sc_rtsaggrlimit; |
| struct ath_node *an = (struct ath_node *) bf->bf_node; |
| |
| /* |
| * get the cix for the lowest valid rix. |
| */ |
| rt = sc->sc_currates; |
| for (i = 4; i--;) { |
| if (bf->bf_rcs[i].tries) { |
| rix = bf->bf_rcs[i].rix; |
| break; |
| } |
| } |
| flags = (bf->bf_flags & (ATH9K_TXDESC_RTSENA | ATH9K_TXDESC_CTSENA)); |
| cix = rt->info[rix].controlRate; |
| |
| /* |
| * If 802.11g protection is enabled, determine whether |
| * to use RTS/CTS or just CTS. Note that this is only |
| * done for OFDM/HT unicast frames. |
| */ |
| if (sc->sc_protmode != PROT_M_NONE && |
| (rt->info[rix].phy == PHY_OFDM || |
| rt->info[rix].phy == PHY_HT) && |
| (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) { |
| if (sc->sc_protmode == PROT_M_RTSCTS) |
| flags = ATH9K_TXDESC_RTSENA; |
| else if (sc->sc_protmode == PROT_M_CTSONLY) |
| flags = ATH9K_TXDESC_CTSENA; |
| |
| cix = rt->info[sc->sc_protrix].controlRate; |
| rtsctsena = 1; |
| } |
| |
| /* For 11n, the default behavior is to enable RTS for |
| * hw retried frames. We enable the global flag here and |
| * let rate series flags determine which rates will actually |
| * use RTS. |
| */ |
| if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) && bf->bf_isdata) { |
| BUG_ON(!an); |
| /* |
| * 802.11g protection not needed, use our default behavior |
| */ |
| if (!rtsctsena) |
| flags = ATH9K_TXDESC_RTSENA; |
| /* |
| * For dynamic MIMO PS, RTS needs to precede the first aggregate |
| * and the second aggregate should have any protection at all. |
| */ |
| if (an->an_smmode == ATH_SM_PWRSAV_DYNAMIC) { |
| if (!bf->bf_aggrburst) { |
| flags = ATH9K_TXDESC_RTSENA; |
| dynamic_mimops = 1; |
| } else { |
| flags = 0; |
| } |
| } |
| } |
| |
| /* |
| * Set protection if aggregate protection on |
| */ |
| if (sc->sc_config.ath_aggr_prot && |
| (!bf->bf_isaggr || (bf->bf_isaggr && bf->bf_al < 8192))) { |
| flags = ATH9K_TXDESC_RTSENA; |
| cix = rt->info[sc->sc_protrix].controlRate; |
| rtsctsena = 1; |
| } |
| |
| /* |
| * For AR5416 - RTS cannot be followed by a frame larger than 8K. |
| */ |
| if (bf->bf_isaggr && (bf->bf_al > aggr_limit_with_rts)) { |
| /* |
| * Ensure that in the case of SM Dynamic power save |
| * while we are bursting the second aggregate the |
| * RTS is cleared. |
| */ |
| flags &= ~(ATH9K_TXDESC_RTSENA); |
| } |
| |
| /* |
| * CTS transmit rate is derived from the transmit rate |
| * by looking in the h/w rate table. We must also factor |
| * in whether or not a short preamble is to be used. |
| */ |
| /* NB: cix is set above where RTS/CTS is enabled */ |
| BUG_ON(cix == 0xff); |
| ctsrate = rt->info[cix].rateCode | |
| (bf->bf_shpreamble ? rt->info[cix].shortPreamble : 0); |
| |
| /* |
| * Setup HAL rate series |
| */ |
| memzero(series, sizeof(struct ath9k_11n_rate_series) * 4); |
| |
| for (i = 0; i < 4; i++) { |
| if (!bf->bf_rcs[i].tries) |
| continue; |
| |
| rix = bf->bf_rcs[i].rix; |
| |
| series[i].Rate = rt->info[rix].rateCode | |
| (bf->bf_shpreamble ? rt->info[rix].shortPreamble : 0); |
| |
| series[i].Tries = bf->bf_rcs[i].tries; |
| |
| series[i].RateFlags = ( |
| (bf->bf_rcs[i].flags & ATH_RC_RTSCTS_FLAG) ? |
| ATH9K_RATESERIES_RTS_CTS : 0) | |
| ((bf->bf_rcs[i].flags & ATH_RC_CW40_FLAG) ? |
| ATH9K_RATESERIES_2040 : 0) | |
| ((bf->bf_rcs[i].flags & ATH_RC_SGI_FLAG) ? |
| ATH9K_RATESERIES_HALFGI : 0); |
| |
| series[i].PktDuration = ath_pkt_duration( |
| sc, rix, bf, |
| (bf->bf_rcs[i].flags & ATH_RC_CW40_FLAG) != 0, |
| (bf->bf_rcs[i].flags & ATH_RC_SGI_FLAG), |
| bf->bf_shpreamble); |
| |
| if ((an->an_smmode == ATH_SM_PWRSAV_STATIC) && |
| (bf->bf_rcs[i].flags & ATH_RC_DS_FLAG) == 0) { |
| /* |
| * When sending to an HT node that has enabled static |
| * SM/MIMO power save, send at single stream rates but |
| * use maximum allowed transmit chains per user, |
| * hardware, regulatory, or country limits for |
| * better range. |
| */ |
| series[i].ChSel = sc->sc_tx_chainmask; |
| } else { |
| if (bf->bf_ht) |
| series[i].ChSel = |
| ath_chainmask_sel_logic(sc, an); |
| else |
| series[i].ChSel = sc->sc_tx_chainmask; |
| } |
| |
| if (rtsctsena) |
| series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS; |
| |
| /* |
| * Set RTS for all rates if node is in dynamic powersave |
| * mode and we are using dual stream rates. |
| */ |
| if (dynamic_mimops && (bf->bf_rcs[i].flags & ATH_RC_DS_FLAG)) |
| series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS; |
| } |
| |
| /* |
| * For non-HT devices, calculate RTS/CTS duration in software |
| * and disable multi-rate retry. |
| */ |
| if (flags && !(ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)) { |
| /* |
| * Compute the transmit duration based on the frame |
| * size and the size of an ACK frame. We call into the |
| * HAL to do the computation since it depends on the |
| * characteristics of the actual PHY being used. |
| * |
| * NB: CTS is assumed the same size as an ACK so we can |
| * use the precalculated ACK durations. |
| */ |
| if (flags & ATH9K_TXDESC_RTSENA) { /* SIFS + CTS */ |
| ctsduration += bf->bf_shpreamble ? |
| rt->info[cix].spAckDuration : |
| rt->info[cix].lpAckDuration; |
| } |
| |
| ctsduration += series[0].PktDuration; |
| |
| if ((bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) { /* SIFS + ACK */ |
| ctsduration += bf->bf_shpreamble ? |
| rt->info[rix].spAckDuration : |
| rt->info[rix].lpAckDuration; |
| } |
| |
| /* |
| * Disable multi-rate retry when using RTS/CTS by clearing |
| * series 1, 2 and 3. |
| */ |
| memzero(&series[1], sizeof(struct ath9k_11n_rate_series) * 3); |
| } |
| |
| /* |
| * set dur_update_en for l-sig computation except for PS-Poll frames |
| */ |
| ath9k_hw_set11n_ratescenario(ah, ds, lastds, |
| !bf->bf_ispspoll, |
| ctsrate, |
| ctsduration, |
| series, 4, flags); |
| if (sc->sc_config.ath_aggr_prot && flags) |
| ath9k_hw_set11n_burstduration(ah, ds, 8192); |
| } |
| |
| /* |
| * Function to send a normal HT (non-AMPDU) frame |
| * NB: must be called with txq lock held |
| */ |
| |
| static int ath_tx_send_normal(struct ath_softc *sc, |
| struct ath_txq *txq, |
| struct ath_atx_tid *tid, |
| struct list_head *bf_head) |
| { |
| struct ath_buf *bf; |
| struct sk_buff *skb; |
| struct ieee80211_tx_info *tx_info; |
| struct ath_tx_info_priv *tx_info_priv; |
| |
| BUG_ON(list_empty(bf_head)); |
| |
| bf = list_first_entry(bf_head, struct ath_buf, list); |
| bf->bf_isampdu = 0; /* regular HT frame */ |
| |
| skb = (struct sk_buff *)bf->bf_mpdu; |
| tx_info = IEEE80211_SKB_CB(skb); |
| tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; |
| memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); |
| |
| /* update starting sequence number for subsequent ADDBA request */ |
| INCR(tid->seq_start, IEEE80211_SEQ_MAX); |
| |
| /* Queue to h/w without aggregation */ |
| bf->bf_nframes = 1; |
| bf->bf_lastbf = bf->bf_lastfrm; /* one single frame */ |
| ath_buf_set_rate(sc, bf); |
| ath_tx_txqaddbuf(sc, txq, bf_head); |
| |
| return 0; |
| } |
| |
| /* flush tid's software queue and send frames as non-ampdu's */ |
| |
| static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) |
| { |
| struct ath_txq *txq = &sc->sc_txq[tid->ac->qnum]; |
| struct ath_buf *bf; |
| struct list_head bf_head; |
| INIT_LIST_HEAD(&bf_head); |
| |
| ASSERT(tid->paused > 0); |
| spin_lock_bh(&txq->axq_lock); |
| |
| tid->paused--; |
| |
| if (tid->paused > 0) { |
| spin_unlock_bh(&txq->axq_lock); |
| return; |
| } |
| |
| while (!list_empty(&tid->buf_q)) { |
| bf = list_first_entry(&tid->buf_q, struct ath_buf, list); |
| ASSERT(!bf->bf_isretried); |
| list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list); |
| ath_tx_send_normal(sc, txq, tid, &bf_head); |
| } |
| |
| spin_unlock_bh(&txq->axq_lock); |
| } |
| |
| /* Completion routine of an aggregate */ |
| |
| static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, |
| struct ath_txq *txq, |
| struct ath_buf *bf, |
| struct list_head *bf_q, |
| int txok) |
| { |
| struct ath_node *an = bf->bf_node; |
| struct ath_atx_tid *tid = ATH_AN_2_TID(an, bf->bf_tidno); |
| struct ath_buf *bf_last = bf->bf_lastbf; |
| struct ath_desc *ds = bf_last->bf_desc; |
| struct ath_buf *bf_next, *bf_lastq = NULL; |
| struct list_head bf_head, bf_pending; |
| u16 seq_st = 0; |
| u32 ba[WME_BA_BMP_SIZE >> 5]; |
| int isaggr, txfail, txpending, sendbar = 0, needreset = 0; |
| int isnodegone = (an->an_flags & ATH_NODE_CLEAN); |
| |
| isaggr = bf->bf_isaggr; |
| if (isaggr) { |
| if (txok) { |
| if (ATH_DS_TX_BA(ds)) { |
| /* |
| * extract starting sequence and |
| * block-ack bitmap |
| */ |
| seq_st = ATH_DS_BA_SEQ(ds); |
| memcpy(ba, |
| ATH_DS_BA_BITMAP(ds), |
| WME_BA_BMP_SIZE >> 3); |
| } else { |
| memzero(ba, WME_BA_BMP_SIZE >> 3); |
| |
| /* |
| * AR5416 can become deaf/mute when BA |
| * issue happens. Chip needs to be reset. |
| * But AP code may have sychronization issues |
| * when perform internal reset in this routine. |
| * Only enable reset in STA mode for now. |
| */ |
| if (sc->sc_opmode == ATH9K_M_STA) |
| needreset = 1; |
| } |
| } else { |
| memzero(ba, WME_BA_BMP_SIZE >> 3); |
| } |
| } |
| |
| INIT_LIST_HEAD(&bf_pending); |
| INIT_LIST_HEAD(&bf_head); |
| |
| while (bf) { |
| txfail = txpending = 0; |
| bf_next = bf->bf_next; |
| |
| if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, bf->bf_seqno))) { |
| /* transmit completion, subframe is |
| * acked by block ack */ |
| } else if (!isaggr && txok) { |
| /* transmit completion */ |
| } else { |
| |
| if (!tid->cleanup_inprogress && !isnodegone && |
| ds->ds_txstat.ts_flags != ATH9K_TX_SW_ABORTED) { |
| if (bf->bf_retries < ATH_MAX_SW_RETRIES) { |
| ath_tx_set_retry(sc, bf); |
| txpending = 1; |
| } else { |
| bf->bf_isxretried = 1; |
| txfail = 1; |
| sendbar = 1; |
| } |
| } else { |
| /* |
| * cleanup in progress, just fail |
| * the un-acked sub-frames |
| */ |
| txfail = 1; |
| } |
| } |
| /* |
| * Remove ath_buf's of this sub-frame from aggregate queue. |
| */ |
| if (bf_next == NULL) { /* last subframe in the aggregate */ |
| ASSERT(bf->bf_lastfrm == bf_last); |
| |
| /* |
| * The last descriptor of the last sub frame could be |
| * a holding descriptor for h/w. If that's the case, |
| * bf->bf_lastfrm won't be in the bf_q. |
| * Make sure we handle bf_q properly here. |
| */ |
| |
| if (!list_empty(bf_q)) { |
| bf_lastq = list_entry(bf_q->prev, |
| struct ath_buf, list); |
| list_cut_position(&bf_head, |
| bf_q, &bf_lastq->list); |
| } else { |
| /* |
| * XXX: if the last subframe only has one |
| * descriptor which is also being used as |
| * a holding descriptor. Then the ath_buf |
| * is not in the bf_q at all. |
| */ |
| INIT_LIST_HEAD(&bf_head); |
| } |
| } else { |
| ASSERT(!list_empty(bf_q)); |
| list_cut_position(&bf_head, |
| bf_q, &bf->bf_lastfrm->list); |
| } |
| |
| if (!txpending) { |
| /* |
| * complete the acked-ones/xretried ones; update |
| * block-ack window |
| */ |
| spin_lock_bh(&txq->axq_lock); |
| ath_tx_update_baw(sc, tid, bf->bf_seqno); |
| spin_unlock_bh(&txq->axq_lock); |
| |
| /* complete this sub-frame */ |
| ath_tx_complete_buf(sc, bf, &bf_head, !txfail, sendbar); |
| } else { |
| /* |
| * retry the un-acked ones |
| */ |
| /* |
| * XXX: if the last descriptor is holding descriptor, |
| * in order to requeue the frame to software queue, we |
| * need to allocate a new descriptor and |
| * copy the content of holding descriptor to it. |
| */ |
| if (bf->bf_next == NULL && |
| bf_last->bf_status & ATH_BUFSTATUS_STALE) { |
| struct ath_buf *tbf; |
| |
| /* allocate new descriptor */ |
| spin_lock_bh(&sc->sc_txbuflock); |
| ASSERT(!list_empty((&sc->sc_txbuf))); |
| tbf = list_first_entry(&sc->sc_txbuf, |
| struct ath_buf, list); |
| list_del(&tbf->list); |
| spin_unlock_bh(&sc->sc_txbuflock); |
| |
| ATH_TXBUF_RESET(tbf); |
| |
| /* copy descriptor content */ |
| tbf->bf_mpdu = bf_last->bf_mpdu; |
| tbf->bf_node = bf_last->bf_node; |
| tbf->bf_buf_addr = bf_last->bf_buf_addr; |
| *(tbf->bf_desc) = *(bf_last->bf_desc); |
| |
| /* link it to the frame */ |
| if (bf_lastq) { |
| bf_lastq->bf_desc->ds_link = |
| tbf->bf_daddr; |
| bf->bf_lastfrm = tbf; |
| ath9k_hw_cleartxdesc(sc->sc_ah, |
| bf->bf_lastfrm->bf_desc); |
| } else { |
| tbf->bf_state = bf_last->bf_state; |
| tbf->bf_lastfrm = tbf; |
| ath9k_hw_cleartxdesc(sc->sc_ah, |
| tbf->bf_lastfrm->bf_desc); |
| |
| /* copy the DMA context */ |
| copy_dma_mem_context( |
| get_dma_mem_context(tbf, |
| bf_dmacontext), |
| get_dma_mem_context(bf_last, |
| bf_dmacontext)); |
| } |
| list_add_tail(&tbf->list, &bf_head); |
| } else { |
| /* |
| * Clear descriptor status words for |
| * software retry |
| */ |
| ath9k_hw_cleartxdesc(sc->sc_ah, |
| bf->bf_lastfrm->bf_desc); |
| } |
| |
| /* |
| * Put this buffer to the temporary pending |
| * queue to retain ordering |
| */ |
| list_splice_tail_init(&bf_head, &bf_pending); |
| } |
| |
| bf = bf_next; |
| } |
| |
| /* |
| * node is already gone. no more assocication |
| * with the node. the node might have been freed |
| * any node acces can result in panic.note tid |
| * is part of the node. |
| */ |
| if (isnodegone) |
| return; |
| |
| if (tid->cleanup_inprogress) { |
| /* check to see if we're done with cleaning the h/w queue */ |
| spin_lock_bh(&txq->axq_lock); |
| |
| if (tid->baw_head == tid->baw_tail) { |
| tid->addba_exchangecomplete = 0; |
| tid->addba_exchangeattempts = 0; |
| spin_unlock_bh(&txq->axq_lock); |
| |
| tid->cleanup_inprogress = false; |
| |
| /* send buffered frames as singles */ |
| ath_tx_flush_tid(sc, tid); |
| } else |
| spin_unlock_bh(&txq->axq_lock); |
| |
| return; |
| } |
| |
| /* |
| * prepend un-acked frames to the beginning of the pending frame queue |
| */ |
| if (!list_empty(&bf_pending)) { |
| spin_lock_bh(&txq->axq_lock); |
| /* Note: we _prepend_, we _do_not_ at to |
| * the end of the queue ! */ |
| list_splice(&bf_pending, &tid->buf_q); |
| ath_tx_queue_tid(txq, tid); |
| spin_unlock_bh(&txq->axq_lock); |
| } |
| |
| if (needreset) |
| ath_internal_reset(sc); |
| |
| return; |
| } |
| |
| /* Process completed xmit descriptors from the specified queue */ |
| |
| static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) |
| { |
| struct ath_hal *ah = sc->sc_ah; |
| struct ath_buf *bf, *lastbf, *bf_held = NULL; |
| struct list_head bf_head; |
| struct ath_desc *ds, *tmp_ds; |
| struct sk_buff *skb; |
| struct ieee80211_tx_info *tx_info; |
| struct ath_tx_info_priv *tx_info_priv; |
| int nacked, txok, nbad = 0, isrifs = 0; |
| int status; |
| |
| DPRINTF(sc, ATH_DBG_QUEUE, |
| "%s: tx queue %d (%x), link %p\n", __func__, |
| txq->axq_qnum, ath9k_hw_gettxbuf(sc->sc_ah, txq->axq_qnum), |
| txq->axq_link); |
| |
| nacked = 0; |
| for (;;) { |
| spin_lock_bh(&txq->axq_lock); |
| txq->axq_intrcnt = 0; /* reset periodic desc intr count */ |
| if (list_empty(&txq->axq_q)) { |
| txq->axq_link = NULL; |
| txq->axq_linkbuf = NULL; |
| spin_unlock_bh(&txq->axq_lock); |
| break; |
| } |
| bf = list_first_entry(&txq->axq_q, struct ath_buf, list); |
| |
| /* |
| * There is a race condition that a BH gets scheduled |
| * after sw writes TxE and before hw re-load the last |
| * descriptor to get the newly chained one. |
| * Software must keep the last DONE descriptor as a |
| * holding descriptor - software does so by marking |
| * it with the STALE flag. |
| */ |
| bf_held = NULL; |
| if (bf->bf_status & ATH_BUFSTATUS_STALE) { |
| bf_held = bf; |
| if (list_is_last(&bf_held->list, &txq->axq_q)) { |
| /* FIXME: |
| * The holding descriptor is the last |
| * descriptor in queue. It's safe to remove |
| * the last holding descriptor in BH context. |
| */ |
| spin_unlock_bh(&txq->axq_lock); |
| break; |
| } else { |
| /* Lets work with the next buffer now */ |
| bf = list_entry(bf_held->list.next, |
| struct ath_buf, list); |
| } |
| } |
| |
| lastbf = bf->bf_lastbf; |
| ds = lastbf->bf_desc; /* NB: last decriptor */ |
| |
| status = ath9k_hw_txprocdesc(ah, ds); |
| if (status == -EINPROGRESS) { |
| spin_unlock_bh(&txq->axq_lock); |
| break; |
| } |
| if (bf->bf_desc == txq->axq_lastdsWithCTS) |
| txq->axq_lastdsWithCTS = NULL; |
| if (ds == txq->axq_gatingds) |
| txq->axq_gatingds = NULL; |
| |
| /* |
| * Remove ath_buf's of the same transmit unit from txq, |
| * however leave the last descriptor back as the holding |
| * descriptor for hw. |
| */ |
| lastbf->bf_status |= ATH_BUFSTATUS_STALE; |
| INIT_LIST_HEAD(&bf_head); |
| |
| if (!list_is_singular(&lastbf->list)) |
| list_cut_position(&bf_head, |
| &txq->axq_q, lastbf->list.prev); |
| |
| txq->axq_depth--; |
| |
| if (bf->bf_isaggr) |
| txq->axq_aggr_depth--; |
| |
| txok = (ds->ds_txstat.ts_status == 0); |
| |
| spin_unlock_bh(&txq->axq_lock); |
| |
| if (bf_held) { |
| list_del(&bf_held->list); |
| spin_lock_bh(&sc->sc_txbuflock); |
| list_add_tail(&bf_held->list, &sc->sc_txbuf); |
| spin_unlock_bh(&sc->sc_txbuflock); |
| } |
| |
| if (!bf->bf_isampdu) { |
| /* |
| * This frame is sent out as a single frame. |
| * Use hardware retry status for this frame. |
| */ |
| bf->bf_retries = ds->ds_txstat.ts_longretry; |
| if (ds->ds_txstat.ts_status & ATH9K_TXERR_XRETRY) |
| bf->bf_isxretried = 1; |
| nbad = 0; |
| } else { |
| nbad = ath_tx_num_badfrms(sc, bf, txok); |
| } |
| skb = bf->bf_mpdu; |
| tx_info = IEEE80211_SKB_CB(skb); |
| tx_info_priv = (struct ath_tx_info_priv *) |
| tx_info->driver_data[0]; |
| if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) |
| tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; |
| if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 && |
| (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) { |
| if (ds->ds_txstat.ts_status == 0) |
| nacked++; |
| |
| if (bf->bf_isdata) { |
| if (isrifs) |
| tmp_ds = bf->bf_rifslast->bf_desc; |
| else |
| tmp_ds = ds; |
| memcpy(&tx_info_priv->tx, |
| &tmp_ds->ds_txstat, |
| sizeof(tx_info_priv->tx)); |
| tx_info_priv->n_frames = bf->bf_nframes; |
| tx_info_priv->n_bad_frames = nbad; |
| } |
| } |
| |
| /* |
| * Complete this transmit unit |
| */ |
| if (bf->bf_isampdu) |
| ath_tx_complete_aggr_rifs(sc, txq, bf, &bf_head, txok); |
| else |
| ath_tx_complete_buf(sc, bf, &bf_head, txok, 0); |
| |
| /* Wake up mac80211 queue */ |
| |
| spin_lock_bh(&txq->axq_lock); |
| if (txq->stopped && ath_txq_depth(sc, txq->axq_qnum) <= |
| (ATH_TXBUF - 20)) { |
| int qnum; |
| qnum = ath_get_mac80211_qnum(txq->axq_qnum, sc); |
| if (qnum != -1) { |
| ieee80211_wake_queue(sc->hw, qnum); |
| txq->stopped = 0; |
| } |
| |
| } |
| |
| /* |
| * schedule any pending packets if aggregation is enabled |
| */ |
| if (sc->sc_txaggr) |
| ath_txq_schedule(sc, txq); |
| spin_unlock_bh(&txq->axq_lock); |
| } |
| return nacked; |
| } |
| |
| static void ath_tx_stopdma(struct ath_softc *sc, struct ath_txq *txq) |
| { |
| struct ath_hal *ah = sc->sc_ah; |
| |
| (void) ath9k_hw_stoptxdma(ah, txq->axq_qnum); |
| DPRINTF(sc, ATH_DBG_XMIT, "%s: tx queue [%u] %x, link %p\n", |
| __func__, txq->axq_qnum, |
| ath9k_hw_gettxbuf(ah, txq->axq_qnum), txq->axq_link); |
| } |
| |
| /* Drain only the data queues */ |
| |
| static void ath_drain_txdataq(struct ath_softc *sc, bool retry_tx) |
| { |
| struct ath_hal *ah = sc->sc_ah; |
| int i; |
| int npend = 0; |
| enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc); |
| |
| /* XXX return value */ |
| if (!sc->sc_invalid) { |
| for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { |
| if (ATH_TXQ_SETUP(sc, i)) { |
| ath_tx_stopdma(sc, &sc->sc_txq[i]); |
| |
| /* The TxDMA may not really be stopped. |
| * Double check the hal tx pending count */ |
| npend += ath9k_hw_numtxpending(ah, |
| sc->sc_txq[i].axq_qnum); |
| } |
| } |
| } |
| |
| if (npend) { |
| int status; |
| |
| /* TxDMA not stopped, reset the hal */ |
| DPRINTF(sc, ATH_DBG_XMIT, |
| "%s: Unable to stop TxDMA. Reset HAL!\n", __func__); |
| |
| spin_lock_bh(&sc->sc_resetlock); |
| if (!ath9k_hw_reset(ah, sc->sc_opmode, |
| &sc->sc_curchan, ht_macmode, |
| sc->sc_tx_chainmask, sc->sc_rx_chainmask, |
| sc->sc_ht_extprotspacing, true, &status)) { |
| |
| DPRINTF(sc, ATH_DBG_FATAL, |
| "%s: unable to reset hardware; hal status %u\n", |
| __func__, |
| status); |
| } |
| spin_unlock_bh(&sc->sc_resetlock); |
| } |
| |
| for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { |
| if (ATH_TXQ_SETUP(sc, i)) |
| ath_tx_draintxq(sc, &sc->sc_txq[i], retry_tx); |
| } |
| } |
| |
| /* Add a sub-frame to block ack window */ |
| |
| static void ath_tx_addto_baw(struct ath_softc *sc, |
| struct ath_atx_tid *tid, |
| struct ath_buf *bf) |
| { |
| int index, cindex; |
| |
| if (bf->bf_isretried) |
| return; |
| |
| index = ATH_BA_INDEX(tid->seq_start, bf->bf_seqno); |
| cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1); |
| |
| ASSERT(tid->tx_buf[cindex] == NULL); |
| tid->tx_buf[cindex] = bf; |
| |
| if (index >= ((tid->baw_tail - tid->baw_head) & |
| (ATH_TID_MAX_BUFS - 1))) { |
| tid->baw_tail = cindex; |
| INCR(tid->baw_tail, ATH_TID_MAX_BUFS); |
| } |
| } |
| |
| /* |
| * Function to send an A-MPDU |
| * NB: must be called with txq lock held |
| */ |
| |
| static int ath_tx_send_ampdu(struct ath_softc *sc, |
| struct ath_txq *txq, |
| struct ath_atx_tid *tid, |
| struct list_head *bf_head, |
| struct ath_tx_control *txctl) |
| { |
| struct ath_buf *bf; |
| struct sk_buff *skb; |
| struct ieee80211_tx_info *tx_info; |
| struct ath_tx_info_priv *tx_info_priv; |
| |
| BUG_ON(list_empty(bf_head)); |
| |
| bf = list_first_entry(bf_head, struct ath_buf, list); |
| bf->bf_isampdu = 1; |
| bf->bf_seqno = txctl->seqno; /* save seqno and tidno in buffer */ |
| bf->bf_tidno = txctl->tidno; |
| |
| /* |
| * Do not queue to h/w when any of the following conditions is true: |
| * - there are pending frames in software queue |
| * - the TID is currently paused for ADDBA/BAR request |
| * - seqno is not within block-ack window |
| * - h/w queue depth exceeds low water mark |
| */ |
| if (!list_empty(&tid->buf_q) || tid->paused || |
| !BAW_WITHIN(tid->seq_start, tid->baw_size, bf->bf_seqno) || |
| txq->axq_depth >= ATH_AGGR_MIN_QDEPTH) { |
| /* |
| * Add this frame to software queue for scheduling later |
| * for aggregation. |
| */ |
| list_splice_tail_init(bf_head, &tid->buf_q); |
| ath_tx_queue_tid(txq, tid); |
| return 0; |
| } |
| |
| skb = (struct sk_buff *)bf->bf_mpdu; |
| tx_info = IEEE80211_SKB_CB(skb); |
| tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; |
| memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); |
| |
| /* Add sub-frame to BAW */ |
| ath_tx_addto_baw(sc, tid, bf); |
| |
| /* Queue to h/w without aggregation */ |
| bf->bf_nframes = 1; |
| bf->bf_lastbf = bf->bf_lastfrm; /* one single frame */ |
| ath_buf_set_rate(sc, bf); |
| ath_tx_txqaddbuf(sc, txq, bf_head); |
| return 0; |
| } |
| |
| /* |
| * looks up the rate |
| * returns aggr limit based on lowest of the rates |
| */ |
| |
| static u32 ath_lookup_rate(struct ath_softc *sc, |
| struct ath_buf *bf) |
| { |
| const struct ath9k_rate_table *rt = sc->sc_currates; |
| struct sk_buff *skb; |
| struct ieee80211_tx_info *tx_info; |
| struct ath_tx_info_priv *tx_info_priv; |
| u32 max_4ms_framelen, frame_length; |
| u16 aggr_limit, legacy = 0, maxampdu; |
| int i; |
| |
| |
| skb = (struct sk_buff *)bf->bf_mpdu; |
| tx_info = IEEE80211_SKB_CB(skb); |
| tx_info_priv = (struct ath_tx_info_priv *) |
| tx_info->driver_data[0]; |
| memcpy(bf->bf_rcs, |
| tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); |
| |
| /* |
| * Find the lowest frame length among the rate series that will have a |
| * 4ms transmit duration. |
| * TODO - TXOP limit needs to be considered. |
| */ |
| max_4ms_framelen = ATH_AMPDU_LIMIT_MAX; |
| |
| for (i = 0; i < 4; i++) { |
| if (bf->bf_rcs[i].tries) { |
| frame_length = bf->bf_rcs[i].max_4ms_framelen; |
| |
| if (rt->info[bf->bf_rcs[i].rix].phy != PHY_HT) { |
| legacy = 1; |
| break; |
| } |
| |
| max_4ms_framelen = min(max_4ms_framelen, frame_length); |
| } |
| } |
| |
| /* |
| * limit aggregate size by the minimum rate if rate selected is |
| * not a probe rate, if rate selected is a probe rate then |
| * avoid aggregation of this packet. |
| */ |
| if (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE || legacy) |
| return 0; |
| |
| aggr_limit = min(max_4ms_framelen, |
| (u32)ATH_AMPDU_LIMIT_DEFAULT); |
| |
| /* |
| * h/w can accept aggregates upto 16 bit lengths (65535). |
| * The IE, however can hold upto 65536, which shows up here |
| * as zero. Ignore 65536 since we are constrained by hw. |
| */ |
| maxampdu = sc->sc_ht_info.maxampdu; |
| if (maxampdu) |
| aggr_limit = min(aggr_limit, maxampdu); |
| |
| return aggr_limit; |
| } |
| |
| /* |
| * returns the number of delimiters to be added to |
| * meet the minimum required mpdudensity. |
| * caller should make sure that the rate is HT rate . |
| */ |
| |
| static int ath_compute_num_delims(struct ath_softc *sc, |
| struct ath_buf *bf, |
| u16 frmlen) |
| { |
| const struct ath9k_rate_table *rt = sc->sc_currates; |
| u32 nsymbits, nsymbols, mpdudensity; |
| u16 minlen; |
| u8 rc, flags, rix; |
| int width, half_gi, ndelim, mindelim; |
| |
| /* Select standard number of delimiters based on frame length alone */ |
| ndelim = ATH_AGGR_GET_NDELIM(frmlen); |
| |
| /* |
| * If encryption enabled, hardware requires some more padding between |
| * subframes. |
| * TODO - this could be improved to be dependent on the rate. |
| * The hardware can keep up at lower rates, but not higher rates |
| */ |
| if (bf->bf_keytype != ATH9K_KEY_TYPE_CLEAR) |
| ndelim += ATH_AGGR_ENCRYPTDELIM; |
| |
| /* |
| * Convert desired mpdu density from microeconds to bytes based |
| * on highest rate in rate series (i.e. first rate) to determine |
| * required minimum length for subframe. Take into account |
| * whether high rate is 20 or 40Mhz and half or full GI. |
| */ |
| mpdudensity = sc->sc_ht_info.mpdudensity; |
| |
| /* |
| * If there is no mpdu density restriction, no further calculation |
| * is needed. |
| */ |
| if (mpdudensity == 0) |
| return ndelim; |
| |
| rix = bf->bf_rcs[0].rix; |
| flags = bf->bf_rcs[0].flags; |
| rc = rt->info[rix].rateCode; |
| width = (flags & ATH_RC_CW40_FLAG) ? 1 : 0; |
| half_gi = (flags & ATH_RC_SGI_FLAG) ? 1 : 0; |
| |
| if (half_gi) |
| nsymbols = NUM_SYMBOLS_PER_USEC_HALFGI(mpdudensity); |
| else |
| nsymbols = NUM_SYMBOLS_PER_USEC(mpdudensity); |
| |
| if (nsymbols == 0) |
| nsymbols = 1; |
| |
| nsymbits = bits_per_symbol[HT_RC_2_MCS(rc)][width]; |
| minlen = (nsymbols * nsymbits) / BITS_PER_BYTE; |
| |
| /* Is frame shorter than required minimum length? */ |
| if (frmlen < minlen) { |
| /* Get the minimum number of delimiters required. */ |
| mindelim = (minlen - frmlen) / ATH_AGGR_DELIM_SZ; |
| ndelim = max(mindelim, ndelim); |
| } |
| |
| return ndelim; |
| } |
| |
| /* |
| * For aggregation from software buffer queue. |
| * NB: must be called with txq lock held |
| */ |
| |
| static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc, |
| struct ath_atx_tid *tid, |
| struct list_head *bf_q, |
| struct ath_buf **bf_last, |
| struct aggr_rifs_param *param, |
| int *prev_frames) |
| { |
| #define PADBYTES(_len) ((4 - ((_len) % 4)) % 4) |
| struct ath_buf *bf, *tbf, *bf_first, *bf_prev = NULL; |
| struct list_head bf_head; |
| int rl = 0, nframes = 0, ndelim; |
| u16 aggr_limit = 0, al = 0, bpad = 0, |
| al_delta, h_baw = tid->baw_size / 2; |
| enum ATH_AGGR_STATUS status = ATH_AGGR_DONE; |
| int prev_al = 0, is_ds_rate = 0; |
| INIT_LIST_HEAD(&bf_head); |
| |
| BUG_ON(list_empty(&tid->buf_q)); |
| |
| bf_first = list_first_entry(&tid->buf_q, struct ath_buf, list); |
| |
| do { |
| bf = list_first_entry(&tid->buf_q, struct ath_buf, list); |
| |
| /* |
| * do not step over block-ack window |
| */ |
| if (!BAW_WITHIN(tid->seq_start, tid->baw_size, bf->bf_seqno)) { |
| status = ATH_AGGR_BAW_CLOSED; |
| break; |
| } |
| |
| if (!rl) { |
| aggr_limit = ath_lookup_rate(sc, bf); |
| rl = 1; |
| /* |
| * Is rate dual stream |
| */ |
| is_ds_rate = |
| (bf->bf_rcs[0].flags & ATH_RC_DS_FLAG) ? 1 : 0; |
| } |
| |
| /* |
| * do not exceed aggregation limit |
| */ |
| al_delta = ATH_AGGR_DELIM_SZ + bf->bf_frmlen; |
| |
| if (nframes && (aggr_limit < |
| (al + bpad + al_delta + prev_al))) { |
| status = ATH_AGGR_LIMITED; |
| break; |
| } |
| |
| /* |
| * do not exceed subframe limit |
| */ |
| if ((nframes + *prev_frames) >= |
| min((int)h_baw, ATH_AMPDU_SUBFRAME_DEFAULT)) { |
| status = ATH_AGGR_LIMITED; |
| break; |
| } |
| |
| /* |
| * add padding for previous frame to aggregation length |
| */ |
| al += bpad + al_delta; |
| |
| /* |
| * Get the delimiters needed to meet the MPDU |
| * density for this node. |
| */ |
| ndelim = ath_compute_num_delims(sc, bf_first, bf->bf_frmlen); |
| |
| bpad = PADBYTES(al_delta) + (ndelim << 2); |
| |
| bf->bf_next = NULL; |
| bf->bf_lastfrm->bf_desc->ds_link = 0; |
| |
| /* |
| * this packet is part of an aggregate |
| * - remove all descriptors belonging to this frame from |
| * software queue |
| * - add it to block ack window |
| * - set up descriptors for aggregation |
| */ |
| list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list); |
| ath_tx_addto_baw(sc, tid, bf); |
| |
| list_for_each_entry(tbf, &bf_head, list) { |
| ath9k_hw_set11n_aggr_middle(sc->sc_ah, |
| tbf->bf_desc, ndelim); |
| } |
| |
| /* |
| * link buffers of this frame to the aggregate |
| */ |
| list_splice_tail_init(&bf_head, bf_q); |
| nframes++; |
| |
| if (bf_prev) { |
| bf_prev->bf_next = bf; |
| bf_prev->bf_lastfrm->bf_desc->ds_link = bf->bf_daddr; |
| } |
| bf_prev = bf; |
| |
| #ifdef AGGR_NOSHORT |
| /* |
| * terminate aggregation on a small packet boundary |
| */ |
| if (bf->bf_frmlen < ATH_AGGR_MINPLEN) { |
| status = ATH_AGGR_SHORTPKT; |
| break; |
| } |
| #endif |
| } while (!list_empty(&tid->buf_q)); |
| |
| bf_first->bf_al = al; |
| bf_first->bf_nframes = nframes; |
| *bf_last = bf_prev; |
| return status; |
| #undef PADBYTES |
| } |
| |
| /* |
| * process pending frames possibly doing a-mpdu aggregation |
| * NB: must be called with txq lock held |
| */ |
| |
| static void ath_tx_sched_aggr(struct ath_softc *sc, |
| struct ath_txq *txq, struct ath_atx_tid *tid) |
| { |
| struct ath_buf *bf, *tbf, *bf_last, *bf_lastaggr = NULL; |
| enum ATH_AGGR_STATUS status; |
| struct list_head bf_q; |
| struct aggr_rifs_param param = {0, 0, 0, 0, NULL}; |
| int prev_frames = 0; |
| |
| do { |
| if (list_empty(&tid->buf_q)) |
| return; |
| |
| INIT_LIST_HEAD(&bf_q); |
| |
| status = ath_tx_form_aggr(sc, tid, &bf_q, &bf_lastaggr, ¶m, |
| &prev_frames); |
| |
| /* |
| * no frames picked up to be aggregated; block-ack |
| * window is not open |
| */ |
| if (list_empty(&bf_q)) |
| break; |
| |
| bf = list_first_entry(&bf_q, struct ath_buf, list); |
| bf_last = list_entry(bf_q.prev, struct ath_buf, list); |
| bf->bf_lastbf = bf_last; |
| |
| /* |
| * if only one frame, send as non-aggregate |
| */ |
| if (bf->bf_nframes == 1) { |
| ASSERT(bf->bf_lastfrm == bf_last); |
| |
| bf->bf_isaggr = 0; |
| /* |
| * clear aggr bits for every descriptor |
| * XXX TODO: is there a way to optimize it? |
| */ |
| list_for_each_entry(tbf, &bf_q, list) { |
| ath9k_hw_clr11n_aggr(sc->sc_ah, tbf->bf_desc); |
| } |
| |
| ath_buf_set_rate(sc, bf); |
| ath_tx_txqaddbuf(sc, txq, &bf_q); |
| continue; |
| } |
| |
| /* |
| * setup first desc with rate and aggr info |
| */ |
| bf->bf_isaggr = 1; |
| ath_buf_set_rate(sc, bf); |
| ath9k_hw_set11n_aggr_first(sc->sc_ah, bf->bf_desc, bf->bf_al); |
| |
| /* |
| * anchor last frame of aggregate correctly |
| */ |
| ASSERT(bf_lastaggr); |
| ASSERT(bf_lastaggr->bf_lastfrm == bf_last); |
| tbf = bf_lastaggr; |
| ath9k_hw_set11n_aggr_last(sc->sc_ah, tbf->bf_desc); |
| |
| /* XXX: We don't enter into this loop, consider removing this */ |
| while (!list_empty(&bf_q) && !list_is_last(&tbf->list, &bf_q)) { |
| tbf = list_entry(tbf->list.next, struct ath_buf, list); |
| ath9k_hw_set11n_aggr_last(sc->sc_ah, tbf->bf_desc); |
| } |
| |
| txq->axq_aggr_depth++; |
| |
| /* |
| * Normal aggregate, queue to hardware |
| */ |
| ath_tx_txqaddbuf(sc, txq, &bf_q); |
| |
| } while (txq->axq_depth < ATH_AGGR_MIN_QDEPTH && |
| status != ATH_AGGR_BAW_CLOSED); |
| } |
| |
| /* Called with txq lock held */ |
| |
| static void ath_tid_drain(struct ath_softc *sc, |
| struct ath_txq *txq, |
| struct ath_atx_tid *tid, |
| bool bh_flag) |
| { |
| struct ath_buf *bf; |
| struct list_head bf_head; |
| INIT_LIST_HEAD(&bf_head); |
| |
| for (;;) { |
| if (list_empty(&tid->buf_q)) |
| break; |
| bf = list_first_entry(&tid->buf_q, struct ath_buf, list); |
| |
| list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list); |
| |
| /* update baw for software retried frame */ |
| if (bf->bf_isretried) |
| ath_tx_update_baw(sc, tid, bf->bf_seqno); |
| |
| /* |
| * do not indicate packets while holding txq spinlock. |
| * unlock is intentional here |
| */ |
| if (likely(bh_flag)) |
| spin_unlock_bh(&txq->axq_lock); |
| else |
| spin_unlock(&txq->axq_lock); |
| |
| /* complete this sub-frame */ |
| ath_tx_complete_buf(sc, bf, &bf_head, 0, 0); |
| |
| if (likely(bh_flag)) |
| spin_lock_bh(&txq->axq_lock); |
| else |
| spin_lock(&txq->axq_lock); |
| } |
| |
| /* |
| * TODO: For frame(s) that are in the retry state, we will reuse the |
| * sequence number(s) without setting the retry bit. The |
| * alternative is to give up on these and BAR the receiver's window |
| * forward. |
| */ |
| tid->seq_next = tid->seq_start; |
| tid->baw_tail = tid->baw_head; |
| } |
| |
| /* |
| * Drain all pending buffers |
| * NB: must be called with txq lock held |
| */ |
| |
| static void ath_txq_drain_pending_buffers(struct ath_softc *sc, |
| struct ath_txq *txq, |
| bool bh_flag) |
| { |
| struct ath_atx_ac *ac, *ac_tmp; |
| struct ath_atx_tid *tid, *tid_tmp; |
| |
| list_for_each_entry_safe(ac, ac_tmp, &txq->axq_acq, list) { |
| list_del(&ac->list); |
| ac->sched = false; |
| list_for_each_entry_safe(tid, tid_tmp, &ac->tid_q, list) { |
| list_del(&tid->list); |
| tid->sched = false; |
| ath_tid_drain(sc, txq, tid, bh_flag); |
| } |
| } |
| } |
| |
| static int ath_tx_start_dma(struct ath_softc *sc, |
| struct sk_buff *skb, |
| struct scatterlist *sg, |
| u32 n_sg, |
| struct ath_tx_control *txctl) |
| { |
| struct ath_node *an = txctl->an; |
| struct ath_buf *bf = NULL; |
| struct list_head bf_head; |
| struct ath_desc *ds; |
| struct ath_hal *ah = sc->sc_ah; |
| struct ath_txq *txq = &sc->sc_txq[txctl->qnum]; |
| struct ath_tx_info_priv *tx_info_priv; |
| struct ath_rc_series *rcs; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); |
| __le16 fc = hdr->frame_control; |
| |
| /* For each sglist entry, allocate an ath_buf for DMA */ |
| INIT_LIST_HEAD(&bf_head); |
| spin_lock_bh(&sc->sc_txbuflock); |
| if (unlikely(list_empty(&sc->sc_txbuf))) { |
| spin_unlock_bh(&sc->sc_txbuflock); |
| return -ENOMEM; |
| } |
| |
| bf = list_first_entry(&sc->sc_txbuf, struct ath_buf, list); |
| list_del(&bf->list); |
| spin_unlock_bh(&sc->sc_txbuflock); |
| |
| list_add_tail(&bf->list, &bf_head); |
| |
| /* set up this buffer */ |
| ATH_TXBUF_RESET(bf); |
| bf->bf_frmlen = txctl->frmlen; |
| bf->bf_isdata = ieee80211_is_data(fc); |
| bf->bf_isbar = ieee80211_is_back_req(fc); |
| bf->bf_ispspoll = ieee80211_is_pspoll(fc); |
| bf->bf_flags = txctl->flags; |
| bf->bf_shpreamble = sc->sc_flags & ATH_PREAMBLE_SHORT; |
| bf->bf_keytype = txctl->keytype; |
| tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; |
| rcs = tx_info_priv->rcs; |
| bf->bf_rcs[0] = rcs[0]; |
| bf->bf_rcs[1] = rcs[1]; |
| bf->bf_rcs[2] = rcs[2]; |
| bf->bf_rcs[3] = rcs[3]; |
| bf->bf_node = an; |
| bf->bf_mpdu = skb; |
| bf->bf_buf_addr = sg_dma_address(sg); |
| |
| /* setup descriptor */ |
| ds = bf->bf_desc; |
| ds->ds_link = 0; |
| ds->ds_data = bf->bf_buf_addr; |
| |
| /* |
| * Save the DMA context in the first ath_buf |
| */ |
| copy_dma_mem_context(get_dma_mem_context(bf, bf_dmacontext), |
| get_dma_mem_context(txctl, dmacontext)); |
| |
| /* |
| * Formulate first tx descriptor with tx controls. |
| */ |
| ath9k_hw_set11n_txdesc(ah, |
| ds, |
| bf->bf_frmlen, /* frame length */ |
| txctl->atype, /* Atheros packet type */ |
| min(txctl->txpower, (u16)60), /* txpower */ |
| txctl->keyix, /* key cache index */ |
| txctl->keytype, /* key type */ |
| txctl->flags); /* flags */ |
| ath9k_hw_filltxdesc(ah, |
| ds, |
| sg_dma_len(sg), /* segment length */ |
| true, /* first segment */ |
| (n_sg == 1) ? true : false, /* last segment */ |
| ds); /* first descriptor */ |
| |
| bf->bf_lastfrm = bf; |
| bf->bf_ht = txctl->ht; |
| |
| spin_lock_bh(&txq->axq_lock); |
| |
| if (txctl->ht && sc->sc_txaggr) { |
| struct ath_atx_tid *tid = ATH_AN_2_TID(an, txctl->tidno); |
| if (ath_aggr_query(sc, an, txctl->tidno)) { |
| /* |
| * Try aggregation if it's a unicast data frame |
| * and the destination is HT capable. |
| */ |
| ath_tx_send_ampdu(sc, txq, tid, &bf_head, txctl); |
| } else { |
| /* |
| * Send this frame as regular when ADDBA exchange |
| * is neither complete nor pending. |
| */ |
| ath_tx_send_normal(sc, txq, tid, &bf_head); |
| } |
| } else { |
| bf->bf_lastbf = bf; |
| bf->bf_nframes = 1; |
| ath_buf_set_rate(sc, bf); |
| |
| if (ieee80211_is_back_req(fc)) { |
| /* This is required for resuming tid |
| * during BAR completion */ |
| bf->bf_tidno = txctl->tidno; |
| } |
| |
| if (is_multicast_ether_addr(hdr->addr1)) { |
| struct ath_vap *avp = sc->sc_vaps[txctl->if_id]; |
| |
| /* |
| * When servicing one or more stations in power-save |
| * mode (or) if there is some mcast data waiting on |
| * mcast queue (to prevent out of order delivery of |
| * mcast,bcast packets) multicast frames must be |
| * buffered until after the beacon. We use the private |
| * mcast queue for that. |
| */ |
| /* XXX? more bit in 802.11 frame header */ |
| spin_lock_bh(&avp->av_mcastq.axq_lock); |
| if (txctl->ps || avp->av_mcastq.axq_depth) |
| ath_tx_mcastqaddbuf(sc, |
| &avp->av_mcastq, &bf_head); |
| else |
| ath_tx_txqaddbuf(sc, txq, &bf_head); |
| spin_unlock_bh(&avp->av_mcastq.axq_lock); |
| } else |
| ath_tx_txqaddbuf(sc, txq, &bf_head); |
| } |
| spin_unlock_bh(&txq->axq_lock); |
| return 0; |
| } |
| |
| static void xmit_map_sg(struct ath_softc *sc, |
| struct sk_buff *skb, |
| dma_addr_t *pa, |
| struct ath_tx_control *txctl) |
| { |
| struct ath_xmit_status tx_status; |
| struct ath_atx_tid *tid; |
| struct scatterlist sg; |
| |
| *pa = pci_map_single(sc->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); |
| |
| /* setup S/G list */ |
| memset(&sg, 0, sizeof(struct scatterlist)); |
| sg_dma_address(&sg) = *pa; |
| sg_dma_len(&sg) = skb->len; |
| |
| if (ath_tx_start_dma(sc, skb, &sg, 1, txctl) != 0) { |
| /* |
| * We have to do drop frame here. |
| */ |
| pci_unmap_single(sc->pdev, *pa, skb->len, PCI_DMA_TODEVICE); |
| |
| tx_status.retries = 0; |
| tx_status.flags = ATH_TX_ERROR; |
| |
| if (txctl->ht && sc->sc_txaggr) { |
| /* Reclaim the seqno. */ |
| tid = ATH_AN_2_TID((struct ath_node *) |
| txctl->an, txctl->tidno); |
| DECR(tid->seq_next, IEEE80211_SEQ_MAX); |
| } |
| ath_tx_complete(sc, skb, &tx_status, txctl->an); |
| } |
| } |
| |
| /* Initialize TX queue and h/w */ |
| |
| int ath_tx_init(struct ath_softc *sc, int nbufs) |
| { |
| int error = 0; |
| |
| do { |
| spin_lock_init(&sc->sc_txbuflock); |
| |
| /* Setup tx descriptors */ |
| error = ath_descdma_setup(sc, &sc->sc_txdma, &sc->sc_txbuf, |
| "tx", nbufs * ATH_FRAG_PER_MSDU, ATH_TXDESC); |
| if (error != 0) { |
| DPRINTF(sc, ATH_DBG_FATAL, |
| "%s: failed to allocate tx descriptors: %d\n", |
| __func__, error); |
| break; |
| } |
| |
| /* XXX allocate beacon state together with vap */ |
| error = ath_descdma_setup(sc, &sc->sc_bdma, &sc->sc_bbuf, |
| "beacon", ATH_BCBUF, 1); |
| if (error != 0) { |
| DPRINTF(sc, ATH_DBG_FATAL, |
| "%s: failed to allocate " |
| "beacon descripotrs: %d\n", |
| __func__, error); |
| break; |
| } |
| |
| } while (0); |
| |
| if (error != 0) |
| ath_tx_cleanup(sc); |
| |
| return error; |
| } |
| |
| /* Reclaim all tx queue resources */ |
| |
| int ath_tx_cleanup(struct ath_softc *sc) |
| { |
| /* cleanup beacon descriptors */ |
| if (sc->sc_bdma.dd_desc_len != 0) |
| ath_descdma_cleanup(sc, &sc->sc_bdma, &sc->sc_bbuf); |
| |
| /* cleanup tx descriptors */ |
| if (sc->sc_txdma.dd_desc_len != 0) |
| ath_descdma_cleanup(sc, &sc->sc_txdma, &sc->sc_txbuf); |
| |
| return 0; |
| } |
| |
| /* Setup a h/w transmit queue */ |
| |
| struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype) |
| { |
| struct ath_hal *ah = sc->sc_ah; |
| struct ath9k_tx_queue_info qi; |
| int qnum; |
| |
| memzero(&qi, sizeof(qi)); |
| qi.tqi_subtype = subtype; |
| qi.tqi_aifs = ATH9K_TXQ_USEDEFAULT; |
| qi.tqi_cwmin = ATH9K_TXQ_USEDEFAULT; |
| qi.tqi_cwmax = ATH9K_TXQ_USEDEFAULT; |
| qi.tqi_physCompBuf = 0; |
| |
| /* |
| * Enable interrupts only for EOL and DESC conditions. |
| * We mark tx descriptors to receive a DESC interrupt |
| * when a tx queue gets deep; otherwise waiting for the |
| * EOL to reap descriptors. Note that this is done to |
| * reduce interrupt load and this only defers reaping |
| * descriptors, never transmitting frames. Aside from |
| * reducing interrupts this also permits more concurrency. |
| * The only potential downside is if the tx queue backs |
| * up in which case the top half of the kernel may backup |
| * due to a lack of tx descriptors. |
| * |
| * The UAPSD queue is an exception, since we take a desc- |
| * based intr on the EOSP frames. |
| */ |
| if (qtype == ATH9K_TX_QUEUE_UAPSD) |
| qi.tqi_qflags = TXQ_FLAG_TXDESCINT_ENABLE; |
| else |
| qi.tqi_qflags = TXQ_FLAG_TXEOLINT_ENABLE | |
| TXQ_FLAG_TXDESCINT_ENABLE; |
| qnum = ath9k_hw_setuptxqueue(ah, qtype, &qi); |
| if (qnum == -1) { |
| /* |
| * NB: don't print a message, this happens |
| * normally on parts with too few tx queues |
| */ |
| return NULL; |
| } |
| if (qnum >= ARRAY_SIZE(sc->sc_txq)) { |
| DPRINTF(sc, ATH_DBG_FATAL, |
| "%s: hal qnum %u out of range, max %u!\n", |
| __func__, qnum, (unsigned int)ARRAY_SIZE(sc->sc_txq)); |
| ath9k_hw_releasetxqueue(ah, qnum); |
| return NULL; |
| } |
| if (!ATH_TXQ_SETUP(sc, qnum)) { |
| struct ath_txq *txq = &sc->sc_txq[qnum]; |
| |
| txq->axq_qnum = qnum; |
| txq->axq_link = NULL; |
| INIT_LIST_HEAD(&txq->axq_q); |
| INIT_LIST_HEAD(&txq->axq_acq); |
| spin_lock_init(&txq->axq_lock); |
| txq->axq_depth = 0; |
| txq->axq_aggr_depth = 0; |
| txq->axq_totalqueued = 0; |
| txq->axq_intrcnt = 0; |
| txq->axq_linkbuf = NULL; |
| sc->sc_txqsetup |= 1<<qnum; |
| } |
| return &sc->sc_txq[qnum]; |
| } |
| |
| /* Reclaim resources for a setup queue */ |
| |
| void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq) |
| { |
| ath9k_hw_releasetxqueue(sc->sc_ah, txq->axq_qnum); |
| sc->sc_txqsetup &= ~(1<<txq->axq_qnum); |
| } |
| |
| /* |
| * Setup a hardware data transmit queue for the specified |
| * access control. The hal may not support all requested |
| * queues in which case it will return a reference to a |
| * previously setup queue. We record the mapping from ac's |
| * to h/w queues for use by ath_tx_start and also track |
| * the set of h/w queues being used to optimize work in the |
| * transmit interrupt handler and related routines. |
| */ |
| |
| int ath_tx_setup(struct ath_softc *sc, int haltype) |
| { |
| struct ath_txq *txq; |
| |
| if (haltype >= ARRAY_SIZE(sc->sc_haltype2q)) { |
| DPRINTF(sc, ATH_DBG_FATAL, |
| "%s: HAL AC %u out of range, max %zu!\n", |
| __func__, haltype, ARRAY_SIZE(sc->sc_haltype2q)); |
| return 0; |
| } |
| txq = ath_txq_setup(sc, ATH9K_TX_QUEUE_DATA, haltype); |
| if (txq != NULL) { |
| sc->sc_haltype2q[haltype] = txq->axq_qnum; |
| return 1; |
| } else |
| return 0; |
| } |
| |
| int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype) |
| { |
| int qnum; |
| |
| switch (qtype) { |
| case ATH9K_TX_QUEUE_DATA: |
| if (haltype >= ARRAY_SIZE(sc->sc_haltype2q)) { |
| DPRINTF(sc, ATH_DBG_FATAL, |
| "%s: HAL AC %u out of range, max %zu!\n", |
| __func__, |
| haltype, ARRAY_SIZE(sc->sc_haltype2q)); |
| return -1; |
| } |
| qnum = sc->sc_haltype2q[haltype]; |
| break; |
| case ATH9K_TX_QUEUE_BEACON: |
| qnum = sc->sc_bhalq; |
| break; |
| case ATH9K_TX_QUEUE_CAB: |
| qnum = sc->sc_cabq->axq_qnum; |
| break; |
| default: |
| qnum = -1; |
| } |
| return qnum; |
| } |
| |
| /* Update parameters for a transmit queue */ |
| |
| int ath_txq_update(struct ath_softc *sc, int qnum, |
| struct ath9k_tx_queue_info *qinfo) |
| { |
| struct ath_hal *ah = sc->sc_ah; |
| int error = 0; |
| struct ath9k_tx_queue_info qi; |
| |
| if (qnum == sc->sc_bhalq) { |
| /* |
| * XXX: for beacon queue, we just save the parameter. |
| * It will be picked up by ath_beaconq_config when |
| * it's necessary. |
| */ |
| sc->sc_beacon_qi = *qinfo; |
| return 0; |
| } |
| |
| ASSERT(sc->sc_txq[qnum].axq_qnum == qnum); |
| |
| ath9k_hw_get_txq_props(ah, qnum, &qi); |
| qi.tqi_aifs = qinfo->tqi_aifs; |
| qi.tqi_cwmin = qinfo->tqi_cwmin; |
| qi.tqi_cwmax = qinfo->tqi_cwmax; |
| qi.tqi_burstTime = qinfo->tqi_burstTime; |
| qi.tqi_readyTime = qinfo->tqi_readyTime; |
| |
| if (!ath9k_hw_set_txq_props(ah, qnum, &qi)) { |
| DPRINTF(sc, ATH_DBG_FATAL, |
| "%s: unable to update hardware queue %u!\n", |
| __func__, qnum); |
| error = -EIO; |
| } else { |
| ath9k_hw_resettxqueue(ah, qnum); /* push to h/w */ |
| } |
| |
| return error; |
| } |
| |
| int ath_cabq_update(struct ath_softc *sc) |
| { |
| struct ath9k_tx_queue_info qi; |
| int qnum = sc->sc_cabq->axq_qnum; |
| struct ath_beacon_config conf; |
| |
| ath9k_hw_get_txq_props(sc->sc_ah, qnum, &qi); |
| /* |
| * Ensure the readytime % is within the bounds. |
| */ |
| if (sc->sc_config.cabqReadytime < ATH9K_READY_TIME_LO_BOUND) |
| sc->sc_config.cabqReadytime = ATH9K_READY_TIME_LO_BOUND; |
| else if (sc->sc_config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND) |
| sc->sc_config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND; |
| |
| ath_get_beaconconfig(sc, ATH_IF_ID_ANY, &conf); |
| qi.tqi_readyTime = |
| (conf.beacon_interval * sc->sc_config.cabqReadytime) / 100; |
| ath_txq_update(sc, qnum, &qi); |
| |
| return 0; |
| } |
| |
| int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb) |
| { |
| struct ath_tx_control txctl; |
| int error = 0; |
| |
| error = ath_tx_prepare(sc, skb, &txctl); |
| if (error == 0) |
| /* |
| * Start DMA mapping. |
| * ath_tx_start_dma() will be called either synchronously |
| * or asynchrounsly once DMA is complete. |
| */ |
| xmit_map_sg(sc, skb, |
| get_dma_mem_context(&txctl, dmacontext), |
| &txctl); |
| else |
| ath_node_put(sc, txctl.an, ATH9K_BH_STATUS_CHANGE); |
| |
| /* failed packets will be dropped by the caller */ |
| return error; |
| } |
| |
| /* Deferred processing of transmit interrupt */ |
| |
| void ath_tx_tasklet(struct ath_softc *sc) |
| { |
| u64 tsf = ath9k_hw_gettsf64(sc->sc_ah); |
| int i, nacked = 0; |
| u32 qcumask = ((1 << ATH9K_NUM_TX_QUEUES) - 1); |
| |
| ath9k_hw_gettxintrtxqs(sc->sc_ah, &qcumask); |
| |
| /* |
| * Process each active queue. |
| */ |
| for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { |
| if (ATH_TXQ_SETUP(sc, i) && (qcumask & (1 << i))) |
| nacked += ath_tx_processq(sc, &sc->sc_txq[i]); |
| } |
| if (nacked) |
| sc->sc_lastrx = tsf; |
| } |
| |
| void ath_tx_draintxq(struct ath_softc *sc, |
| struct ath_txq *txq, bool retry_tx) |
| { |
| struct ath_buf *bf, *lastbf; |
| struct list_head bf_head; |
| |
| INIT_LIST_HEAD(&bf_head); |
| |
| /* |
| * NB: this assumes output has been stopped and |
| * we do not need to block ath_tx_tasklet |
| */ |
| for (;;) { |
| spin_lock_bh(&txq->axq_lock); |
| |
| if (list_empty(&txq->axq_q)) { |
| txq->axq_link = NULL; |
| txq->axq_linkbuf = NULL; |
| spin_unlock_bh(&txq->axq_lock); |
| break; |
| } |
| |
| bf = list_first_entry(&txq->axq_q, struct ath_buf, list); |
| |
| if (bf->bf_status & ATH_BUFSTATUS_STALE) { |
| list_del(&bf->list); |
| spin_unlock_bh(&txq->axq_lock); |
| |
| spin_lock_bh(&sc->sc_txbuflock); |
| list_add_tail(&bf->list, &sc->sc_txbuf); |
| spin_unlock_bh(&sc->sc_txbuflock); |
| continue; |
| } |
| |
| lastbf = bf->bf_lastbf; |
| if (!retry_tx) |
| lastbf->bf_desc->ds_txstat.ts_flags = |
| ATH9K_TX_SW_ABORTED; |
| |
| /* remove ath_buf's of the same mpdu from txq */ |
| list_cut_position(&bf_head, &txq->axq_q, &lastbf->list); |
| txq->axq_depth--; |
| |
| spin_unlock_bh(&txq->axq_lock); |
| |
| if (bf->bf_isampdu) |
| ath_tx_complete_aggr_rifs(sc, txq, bf, &bf_head, 0); |
| else |
| ath_tx_complete_buf(sc, bf, &bf_head, 0, 0); |
| } |
| |
| /* flush any pending frames if aggregation is enabled */ |
| if (sc->sc_txaggr) { |
| if (!retry_tx) { |
| spin_lock_bh(&txq->axq_lock); |
| ath_txq_drain_pending_buffers(sc, txq, |
| ATH9K_BH_STATUS_CHANGE); |
| spin_unlock_bh(&txq->axq_lock); |
| } |
| } |
| } |
| |
| /* Drain the transmit queues and reclaim resources */ |
| |
| void ath_draintxq(struct ath_softc *sc, bool retry_tx) |
| { |
| /* stop beacon queue. The beacon will be freed when |
| * we go to INIT state */ |
| if (!sc->sc_invalid) { |
| (void) ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); |
| DPRINTF(sc, ATH_DBG_XMIT, "%s: beacon queue %x\n", __func__, |
| ath9k_hw_gettxbuf(sc->sc_ah, sc->sc_bhalq)); |
| } |
| |
| ath_drain_txdataq(sc, retry_tx); |
| } |
| |
| u32 ath_txq_depth(struct ath_softc *sc, int qnum) |
| { |
| return sc->sc_txq[qnum].axq_depth; |
| } |
| |
| u32 ath_txq_aggr_depth(struct ath_softc *sc, int qnum) |
| { |
| return sc->sc_txq[qnum].axq_aggr_depth; |
| } |
| |
| /* Check if an ADDBA is required. A valid node must be passed. */ |
| enum ATH_AGGR_CHECK ath_tx_aggr_check(struct ath_softc *sc, |
| struct ath_node *an, |
| u8 tidno) |
| { |
| struct ath_atx_tid *txtid; |
| DECLARE_MAC_BUF(mac); |
| |
| if (!sc->sc_txaggr) |
| return AGGR_NOT_REQUIRED; |
| |
| /* ADDBA exchange must be completed before sending aggregates */ |
| txtid = ATH_AN_2_TID(an, tidno); |
| |
| if (txtid->addba_exchangecomplete) |
| return AGGR_EXCHANGE_DONE; |
| |
| if (txtid->cleanup_inprogress) |
| return AGGR_CLEANUP_PROGRESS; |
| |
| if (txtid->addba_exchangeinprogress) |
| return AGGR_EXCHANGE_PROGRESS; |
| |
| if (!txtid->addba_exchangecomplete) { |
| if (!txtid->addba_exchangeinprogress && |
| (txtid->addba_exchangeattempts < ADDBA_EXCHANGE_ATTEMPTS)) { |
| txtid->addba_exchangeattempts++; |
| return AGGR_REQUIRED; |
| } |
| } |
| |
| return AGGR_NOT_REQUIRED; |
| } |
| |
| /* Start TX aggregation */ |
| |
| int ath_tx_aggr_start(struct ath_softc *sc, |
| const u8 *addr, |
| u16 tid, |
| u16 *ssn) |
| { |
| struct ath_atx_tid *txtid; |
| struct ath_node *an; |
| |
| spin_lock_bh(&sc->node_lock); |
| an = ath_node_find(sc, (u8 *) addr); |
| spin_unlock_bh(&sc->node_lock); |
| |
| if (!an) { |
| DPRINTF(sc, ATH_DBG_AGGR, |
| "%s: Node not found to initialize " |
| "TX aggregation\n", __func__); |
| return -1; |
| } |
| |
| if (sc->sc_txaggr) { |
| txtid = ATH_AN_2_TID(an, tid); |
| txtid->addba_exchangeinprogress = 1; |
| ath_tx_pause_tid(sc, txtid); |
| } |
| |
| return 0; |
| } |
| |
| /* Stop tx aggregation */ |
| |
| int ath_tx_aggr_stop(struct ath_softc *sc, |
| const u8 *addr, |
| u16 tid) |
| { |
| struct ath_node *an; |
| |
| spin_lock_bh(&sc->node_lock); |
| an = ath_node_find(sc, (u8 *) addr); |
| spin_unlock_bh(&sc->node_lock); |
| |
| if (!an) { |
| DPRINTF(sc, ATH_DBG_AGGR, |
| "%s: TX aggr stop for non-existent node\n", __func__); |
| return -1; |
| } |
| |
| ath_tx_aggr_teardown(sc, an, tid); |
| return 0; |
| } |
| |
| /* |
| * Performs transmit side cleanup when TID changes from aggregated to |
| * unaggregated. |
| * - Pause the TID and mark cleanup in progress |
| * - Discard all retry frames from the s/w queue. |
| */ |
| |
| void ath_tx_aggr_teardown(struct ath_softc *sc, |
| struct ath_node *an, u8 tid) |
| { |
| struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid); |
| struct ath_txq *txq = &sc->sc_txq[txtid->ac->qnum]; |
| struct ath_buf *bf; |
| struct list_head bf_head; |
| INIT_LIST_HEAD(&bf_head); |
| |
| DPRINTF(sc, ATH_DBG_AGGR, "%s: teardown TX aggregation\n", __func__); |
| |
| if (txtid->cleanup_inprogress) /* cleanup is in progress */ |
| return; |
| |
| if (!txtid->addba_exchangecomplete) { |
| txtid->addba_exchangeattempts = 0; |
| return; |
| } |
| |
| /* TID must be paused first */ |
| ath_tx_pause_tid(sc, txtid); |
| |
| /* drop all software retried frames and mark this TID */ |
| spin_lock_bh(&txq->axq_lock); |
| while (!list_empty(&txtid->buf_q)) { |
| bf = list_first_entry(&txtid->buf_q, struct ath_buf, list); |
| if (!bf->bf_isretried) { |
| /* |
| * NB: it's based on the assumption that |
| * software retried frame will always stay |
| * at the head of software queue. |
| */ |
| break; |
| } |
| list_cut_position(&bf_head, |
| &txtid->buf_q, &bf->bf_lastfrm->list); |
| ath_tx_update_baw(sc, txtid, bf->bf_seqno); |
| |
| /* complete this sub-frame */ |
| ath_tx_complete_buf(sc, bf, &bf_head, 0, 0); |
| } |
| |
| if (txtid->baw_head != txtid->baw_tail) { |
| spin_unlock_bh(&txq->axq_lock); |
| txtid->cleanup_inprogress = true; |
| } else { |
| txtid->addba_exchangecomplete = 0; |
| txtid->addba_exchangeattempts = 0; |
| spin_unlock_bh(&txq->axq_lock); |
| ath_tx_flush_tid(sc, txtid); |
| } |
| } |
| |
| /* |
| * Tx scheduling logic |
| * NB: must be called with txq lock held |
| */ |
| |
| void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq) |
| { |
| struct ath_atx_ac *ac; |
| struct ath_atx_tid *tid; |
| |
| /* nothing to schedule */ |
| if (list_empty(&txq->axq_acq)) |
| return; |
| /* |
| * get the first node/ac pair on the queue |
| */ |
| ac = list_first_entry(&txq->axq_acq, struct ath_atx_ac, list); |
| list_del(&ac->list); |
| ac->sched = false; |
| |
| /* |
| * process a single tid per destination |
| */ |
| do { |
| /* nothing to schedule */ |
| if (list_empty(&ac->tid_q)) |
| return; |
| |
| tid = list_first_entry(&ac->tid_q, struct ath_atx_tid, list); |
| list_del(&tid->list); |
| tid->sched = false; |
| |
| if (tid->paused) /* check next tid to keep h/w busy */ |
| continue; |
| |
| if (!(tid->an->an_smmode == ATH_SM_PWRSAV_DYNAMIC) || |
| ((txq->axq_depth % 2) == 0)) { |
| ath_tx_sched_aggr(sc, txq, tid); |
| } |
| |
| /* |
| * add tid to round-robin queue if more frames |
| * are pending for the tid |
| */ |
| if (!list_empty(&tid->buf_q)) |
| ath_tx_queue_tid(txq, tid); |
| |
| /* only schedule one TID at a time */ |
| break; |
| } while (!list_empty(&ac->tid_q)); |
| |
| /* |
| * schedule AC if more TIDs need processing |
| */ |
| if (!list_empty(&ac->tid_q)) { |
| /* |
| * add dest ac to txq if not already added |
| */ |
| if (!ac->sched) { |
| ac->sched = true; |
| list_add_tail(&ac->list, &txq->axq_acq); |
| } |
| } |
| } |
| |
| /* Initialize per-node transmit state */ |
| |
| void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) |
| { |
| if (sc->sc_txaggr) { |
| struct ath_atx_tid *tid; |
| struct ath_atx_ac *ac; |
| int tidno, acno; |
| |
| sc->sc_ht_info.maxampdu = ATH_AMPDU_LIMIT_DEFAULT; |
| |
| /* |
| * Init per tid tx state |
| */ |
| for (tidno = 0, tid = &an->an_aggr.tx.tid[tidno]; |
| tidno < WME_NUM_TID; |
| tidno++, tid++) { |
| tid->an = an; |
| tid->tidno = tidno; |
| tid->seq_start = tid->seq_next = 0; |
| tid->baw_size = WME_MAX_BA; |
| tid->baw_head = tid->baw_tail = 0; |
| tid->sched = false; |
| tid->paused = false; |
| tid->cleanup_inprogress = false; |
| INIT_LIST_HEAD(&tid->buf_q); |
| |
| acno = TID_TO_WME_AC(tidno); |
| tid->ac = &an->an_aggr.tx.ac[acno]; |
| |
| /* ADDBA state */ |
| tid->addba_exchangecomplete = 0; |
| tid->addba_exchangeinprogress = 0; |
| tid->addba_exchangeattempts = 0; |
| } |
| |
| /* |
| * Init per ac tx state |
| */ |
| for (acno = 0, ac = &an->an_aggr.tx.ac[acno]; |
| acno < WME_NUM_AC; acno++, ac++) { |
| ac->sched = false; |
| INIT_LIST_HEAD(&ac->tid_q); |
| |
| switch (acno) { |
| case WME_AC_BE: |
| ac->qnum = ath_tx_get_qnum(sc, |
| ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE); |
| break; |
| case WME_AC_BK: |
| ac->qnum = ath_tx_get_qnum(sc, |
| ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BK); |
| break; |
| case WME_AC_VI: |
| ac->qnum = ath_tx_get_qnum(sc, |
| ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_VI); |
| break; |
| case WME_AC_VO: |
| ac->qnum = ath_tx_get_qnum(sc, |
| ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_VO); |
| break; |
| } |
| } |
| } |
| } |
| |
| /* Cleanupthe pending buffers for the node. */ |
| |
| void ath_tx_node_cleanup(struct ath_softc *sc, |
| struct ath_node *an, bool bh_flag) |
| { |
| int i; |
| struct ath_atx_ac *ac, *ac_tmp; |
| struct ath_atx_tid *tid, *tid_tmp; |
| struct ath_txq *txq; |
| for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { |
| if (ATH_TXQ_SETUP(sc, i)) { |
| txq = &sc->sc_txq[i]; |
| |
| if (likely(bh_flag)) |
| spin_lock_bh(&txq->axq_lock); |
| else |
| spin_lock(&txq->axq_lock); |
| |
| list_for_each_entry_safe(ac, |
| ac_tmp, &txq->axq_acq, list) { |
| tid = list_first_entry(&ac->tid_q, |
| struct ath_atx_tid, list); |
| if (tid && tid->an != an) |
| continue; |
| list_del(&ac->list); |
| ac->sched = false; |
| |
| list_for_each_entry_safe(tid, |
| tid_tmp, &ac->tid_q, list) { |
| list_del(&tid->list); |
| tid->sched = false; |
| ath_tid_drain(sc, txq, tid, bh_flag); |
| tid->addba_exchangecomplete = 0; |
| tid->addba_exchangeattempts = 0; |
| tid->cleanup_inprogress = false; |
| } |
| } |
| |
| if (likely(bh_flag)) |
| spin_unlock_bh(&txq->axq_lock); |
| else |
| spin_unlock(&txq->axq_lock); |
| } |
| } |
| } |
| |
| /* Cleanup per node transmit state */ |
| |
| void ath_tx_node_free(struct ath_softc *sc, struct ath_node *an) |
| { |
| if (sc->sc_txaggr) { |
| struct ath_atx_tid *tid; |
| int tidno, i; |
| |
| /* Init per tid rx state */ |
| for (tidno = 0, tid = &an->an_aggr.tx.tid[tidno]; |
| tidno < WME_NUM_TID; |
| tidno++, tid++) { |
| |
| for (i = 0; i < ATH_TID_MAX_BUFS; i++) |
| ASSERT(tid->tx_buf[i] == NULL); |
| } |
| } |
| } |