| /* |
| * Low-Level PCI Support for PC -- Routing of Interrupts |
| * |
| * (c) 1999--2000 Martin Mares <mj@ucw.cz> |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/dmi.h> |
| #include <linux/io.h> |
| #include <linux/smp.h> |
| #include <asm/io_apic.h> |
| #include <linux/irq.h> |
| #include <linux/acpi.h> |
| #include <asm/pci_x86.h> |
| |
| #define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24)) |
| #define PIRQ_VERSION 0x0100 |
| |
| static int broken_hp_bios_irq9; |
| static int acer_tm360_irqrouting; |
| |
| static struct irq_routing_table *pirq_table; |
| |
| static int pirq_enable_irq(struct pci_dev *dev); |
| |
| /* |
| * Never use: 0, 1, 2 (timer, keyboard, and cascade) |
| * Avoid using: 13, 14 and 15 (FP error and IDE). |
| * Penalize: 3, 4, 6, 7, 12 (known ISA uses: serial, floppy, parallel and mouse) |
| */ |
| unsigned int pcibios_irq_mask = 0xfff8; |
| |
| static int pirq_penalty[16] = { |
| 1000000, 1000000, 1000000, 1000, 1000, 0, 1000, 1000, |
| 0, 0, 0, 0, 1000, 100000, 100000, 100000 |
| }; |
| |
| struct irq_router { |
| char *name; |
| u16 vendor, device; |
| int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq); |
| int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, |
| int new); |
| }; |
| |
| struct irq_router_handler { |
| u16 vendor; |
| int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device); |
| }; |
| |
| int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL; |
| void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL; |
| |
| /* |
| * Check passed address for the PCI IRQ Routing Table signature |
| * and perform checksum verification. |
| */ |
| |
| static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr) |
| { |
| struct irq_routing_table *rt; |
| int i; |
| u8 sum; |
| |
| rt = (struct irq_routing_table *) addr; |
| if (rt->signature != PIRQ_SIGNATURE || |
| rt->version != PIRQ_VERSION || |
| rt->size % 16 || |
| rt->size < sizeof(struct irq_routing_table)) |
| return NULL; |
| sum = 0; |
| for (i = 0; i < rt->size; i++) |
| sum += addr[i]; |
| if (!sum) { |
| DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", |
| rt); |
| return rt; |
| } |
| return NULL; |
| } |
| |
| |
| |
| /* |
| * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table. |
| */ |
| |
| static struct irq_routing_table * __init pirq_find_routing_table(void) |
| { |
| u8 *addr; |
| struct irq_routing_table *rt; |
| |
| if (pirq_table_addr) { |
| rt = pirq_check_routing_table((u8 *) __va(pirq_table_addr)); |
| if (rt) |
| return rt; |
| printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n"); |
| } |
| for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) { |
| rt = pirq_check_routing_table(addr); |
| if (rt) |
| return rt; |
| } |
| return NULL; |
| } |
| |
| /* |
| * If we have a IRQ routing table, use it to search for peer host |
| * bridges. It's a gross hack, but since there are no other known |
| * ways how to get a list of buses, we have to go this way. |
| */ |
| |
| static void __init pirq_peer_trick(void) |
| { |
| struct irq_routing_table *rt = pirq_table; |
| u8 busmap[256]; |
| int i; |
| struct irq_info *e; |
| |
| memset(busmap, 0, sizeof(busmap)); |
| for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) { |
| e = &rt->slots[i]; |
| #ifdef DEBUG |
| { |
| int j; |
| DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot); |
| for (j = 0; j < 4; j++) |
| DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap); |
| DBG("\n"); |
| } |
| #endif |
| busmap[e->bus] = 1; |
| } |
| for (i = 1; i < 256; i++) { |
| int node; |
| if (!busmap[i] || pci_find_bus(0, i)) |
| continue; |
| node = get_mp_bus_to_node(i); |
| if (pci_scan_bus_on_node(i, &pci_root_ops, node)) |
| printk(KERN_INFO "PCI: Discovered primary peer " |
| "bus %02x [IRQ]\n", i); |
| } |
| pcibios_last_bus = -1; |
| } |
| |
| /* |
| * Code for querying and setting of IRQ routes on various interrupt routers. |
| */ |
| |
| void eisa_set_level_irq(unsigned int irq) |
| { |
| unsigned char mask = 1 << (irq & 7); |
| unsigned int port = 0x4d0 + (irq >> 3); |
| unsigned char val; |
| static u16 eisa_irq_mask; |
| |
| if (irq >= 16 || (1 << irq) & eisa_irq_mask) |
| return; |
| |
| eisa_irq_mask |= (1 << irq); |
| printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq); |
| val = inb(port); |
| if (!(val & mask)) { |
| DBG(KERN_DEBUG " -> edge"); |
| outb(val | mask, port); |
| } |
| } |
| |
| /* |
| * Common IRQ routing practice: nibbles in config space, |
| * offset by some magic constant. |
| */ |
| static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr) |
| { |
| u8 x; |
| unsigned reg = offset + (nr >> 1); |
| |
| pci_read_config_byte(router, reg, &x); |
| return (nr & 1) ? (x >> 4) : (x & 0xf); |
| } |
| |
| static void write_config_nybble(struct pci_dev *router, unsigned offset, |
| unsigned nr, unsigned int val) |
| { |
| u8 x; |
| unsigned reg = offset + (nr >> 1); |
| |
| pci_read_config_byte(router, reg, &x); |
| x = (nr & 1) ? ((x & 0x0f) | (val << 4)) : ((x & 0xf0) | val); |
| pci_write_config_byte(router, reg, x); |
| } |
| |
| /* |
| * ALI pirq entries are damn ugly, and completely undocumented. |
| * This has been figured out from pirq tables, and it's not a pretty |
| * picture. |
| */ |
| static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq) |
| { |
| static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 }; |
| |
| WARN_ON_ONCE(pirq > 16); |
| return irqmap[read_config_nybble(router, 0x48, pirq-1)]; |
| } |
| |
| static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) |
| { |
| static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 }; |
| unsigned int val = irqmap[irq]; |
| |
| WARN_ON_ONCE(pirq > 16); |
| if (val) { |
| write_config_nybble(router, 0x48, pirq-1, val); |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* |
| * The Intel PIIX4 pirq rules are fairly simple: "pirq" is |
| * just a pointer to the config space. |
| */ |
| static int pirq_piix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) |
| { |
| u8 x; |
| |
| pci_read_config_byte(router, pirq, &x); |
| return (x < 16) ? x : 0; |
| } |
| |
| static int pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) |
| { |
| pci_write_config_byte(router, pirq, irq); |
| return 1; |
| } |
| |
| /* |
| * The VIA pirq rules are nibble-based, like ALI, |
| * but without the ugly irq number munging. |
| * However, PIRQD is in the upper instead of lower 4 bits. |
| */ |
| static int pirq_via_get(struct pci_dev *router, struct pci_dev *dev, int pirq) |
| { |
| return read_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq); |
| } |
| |
| static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) |
| { |
| write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq); |
| return 1; |
| } |
| |
| /* |
| * The VIA pirq rules are nibble-based, like ALI, |
| * but without the ugly irq number munging. |
| * However, for 82C586, nibble map is different . |
| */ |
| static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq) |
| { |
| static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; |
| |
| WARN_ON_ONCE(pirq > 5); |
| return read_config_nybble(router, 0x55, pirqmap[pirq-1]); |
| } |
| |
| static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) |
| { |
| static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; |
| |
| WARN_ON_ONCE(pirq > 5); |
| write_config_nybble(router, 0x55, pirqmap[pirq-1], irq); |
| return 1; |
| } |
| |
| /* |
| * ITE 8330G pirq rules are nibble-based |
| * FIXME: pirqmap may be { 1, 0, 3, 2 }, |
| * 2+3 are both mapped to irq 9 on my system |
| */ |
| static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq) |
| { |
| static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; |
| |
| WARN_ON_ONCE(pirq > 4); |
| return read_config_nybble(router, 0x43, pirqmap[pirq-1]); |
| } |
| |
| static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) |
| { |
| static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; |
| |
| WARN_ON_ONCE(pirq > 4); |
| write_config_nybble(router, 0x43, pirqmap[pirq-1], irq); |
| return 1; |
| } |
| |
| /* |
| * OPTI: high four bits are nibble pointer.. |
| * I wonder what the low bits do? |
| */ |
| static int pirq_opti_get(struct pci_dev *router, struct pci_dev *dev, int pirq) |
| { |
| return read_config_nybble(router, 0xb8, pirq >> 4); |
| } |
| |
| static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) |
| { |
| write_config_nybble(router, 0xb8, pirq >> 4, irq); |
| return 1; |
| } |
| |
| /* |
| * Cyrix: nibble offset 0x5C |
| * 0x5C bits 7:4 is INTB bits 3:0 is INTA |
| * 0x5D bits 7:4 is INTD bits 3:0 is INTC |
| */ |
| static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) |
| { |
| return read_config_nybble(router, 0x5C, (pirq-1)^1); |
| } |
| |
| static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) |
| { |
| write_config_nybble(router, 0x5C, (pirq-1)^1, irq); |
| return 1; |
| } |
| |
| /* |
| * PIRQ routing for SiS 85C503 router used in several SiS chipsets. |
| * We have to deal with the following issues here: |
| * - vendors have different ideas about the meaning of link values |
| * - some onboard devices (integrated in the chipset) have special |
| * links and are thus routed differently (i.e. not via PCI INTA-INTD) |
| * - different revision of the router have a different layout for |
| * the routing registers, particularly for the onchip devices |
| * |
| * For all routing registers the common thing is we have one byte |
| * per routeable link which is defined as: |
| * bit 7 IRQ mapping enabled (0) or disabled (1) |
| * bits [6:4] reserved (sometimes used for onchip devices) |
| * bits [3:0] IRQ to map to |
| * allowed: 3-7, 9-12, 14-15 |
| * reserved: 0, 1, 2, 8, 13 |
| * |
| * The config-space registers located at 0x41/0x42/0x43/0x44 are |
| * always used to route the normal PCI INT A/B/C/D respectively. |
| * Apparently there are systems implementing PCI routing table using |
| * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D. |
| * We try our best to handle both link mappings. |
| * |
| * Currently (2003-05-21) it appears most SiS chipsets follow the |
| * definition of routing registers from the SiS-5595 southbridge. |
| * According to the SiS 5595 datasheets the revision id's of the |
| * router (ISA-bridge) should be 0x01 or 0xb0. |
| * |
| * Furthermore we've also seen lspci dumps with revision 0x00 and 0xb1. |
| * Looks like these are used in a number of SiS 5xx/6xx/7xx chipsets. |
| * They seem to work with the current routing code. However there is |
| * some concern because of the two USB-OHCI HCs (original SiS 5595 |
| * had only one). YMMV. |
| * |
| * Onchip routing for router rev-id 0x01/0xb0 and probably 0x00/0xb1: |
| * |
| * 0x61: IDEIRQ: |
| * bits [6:5] must be written 01 |
| * bit 4 channel-select primary (0), secondary (1) |
| * |
| * 0x62: USBIRQ: |
| * bit 6 OHCI function disabled (0), enabled (1) |
| * |
| * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved |
| * |
| * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved |
| * |
| * We support USBIRQ (in addition to INTA-INTD) and keep the |
| * IDE, ACPI and DAQ routing untouched as set by the BIOS. |
| * |
| * Currently the only reported exception is the new SiS 65x chipset |
| * which includes the SiS 69x southbridge. Here we have the 85C503 |
| * router revision 0x04 and there are changes in the register layout |
| * mostly related to the different USB HCs with USB 2.0 support. |
| * |
| * Onchip routing for router rev-id 0x04 (try-and-error observation) |
| * |
| * 0x60/0x61/0x62/0x63: 1xEHCI and 3xOHCI (companion) USB-HCs |
| * bit 6-4 are probably unused, not like 5595 |
| */ |
| |
| #define PIRQ_SIS_IRQ_MASK 0x0f |
| #define PIRQ_SIS_IRQ_DISABLE 0x80 |
| #define PIRQ_SIS_USB_ENABLE 0x40 |
| |
| static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq) |
| { |
| u8 x; |
| int reg; |
| |
| reg = pirq; |
| if (reg >= 0x01 && reg <= 0x04) |
| reg += 0x40; |
| pci_read_config_byte(router, reg, &x); |
| return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK); |
| } |
| |
| static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) |
| { |
| u8 x; |
| int reg; |
| |
| reg = pirq; |
| if (reg >= 0x01 && reg <= 0x04) |
| reg += 0x40; |
| pci_read_config_byte(router, reg, &x); |
| x &= ~(PIRQ_SIS_IRQ_MASK | PIRQ_SIS_IRQ_DISABLE); |
| x |= irq ? irq: PIRQ_SIS_IRQ_DISABLE; |
| pci_write_config_byte(router, reg, x); |
| return 1; |
| } |
| |
| |
| /* |
| * VLSI: nibble offset 0x74 - educated guess due to routing table and |
| * config space of VLSI 82C534 PCI-bridge/router (1004:0102) |
| * Tested on HP OmniBook 800 covering PIRQ 1, 2, 4, 8 for onboard |
| * devices, PIRQ 3 for non-pci(!) soundchip and (untested) PIRQ 6 |
| * for the busbridge to the docking station. |
| */ |
| |
| static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq) |
| { |
| WARN_ON_ONCE(pirq >= 9); |
| if (pirq > 8) { |
| dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq); |
| return 0; |
| } |
| return read_config_nybble(router, 0x74, pirq-1); |
| } |
| |
| static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) |
| { |
| WARN_ON_ONCE(pirq >= 9); |
| if (pirq > 8) { |
| dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq); |
| return 0; |
| } |
| write_config_nybble(router, 0x74, pirq-1, irq); |
| return 1; |
| } |
| |
| /* |
| * ServerWorks: PCI interrupts mapped to system IRQ lines through Index |
| * and Redirect I/O registers (0x0c00 and 0x0c01). The Index register |
| * format is (PCIIRQ## | 0x10), e.g.: PCIIRQ10=0x1a. The Redirect |
| * register is a straight binary coding of desired PIC IRQ (low nibble). |
| * |
| * The 'link' value in the PIRQ table is already in the correct format |
| * for the Index register. There are some special index values: |
| * 0x00 for ACPI (SCI), 0x01 for USB, 0x02 for IDE0, 0x04 for IDE1, |
| * and 0x03 for SMBus. |
| */ |
| static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq) |
| { |
| outb(pirq, 0xc00); |
| return inb(0xc01) & 0xf; |
| } |
| |
| static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, |
| int pirq, int irq) |
| { |
| outb(pirq, 0xc00); |
| outb(irq, 0xc01); |
| return 1; |
| } |
| |
| /* Support for AMD756 PCI IRQ Routing |
| * Jhon H. Caicedo <jhcaiced@osso.org.co> |
| * Jun/21/2001 0.2.0 Release, fixed to use "nybble" functions... (jhcaiced) |
| * Jun/19/2001 Alpha Release 0.1.0 (jhcaiced) |
| * The AMD756 pirq rules are nibble-based |
| * offset 0x56 0-3 PIRQA 4-7 PIRQB |
| * offset 0x57 0-3 PIRQC 4-7 PIRQD |
| */ |
| static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq) |
| { |
| u8 irq; |
| irq = 0; |
| if (pirq <= 4) |
| irq = read_config_nybble(router, 0x56, pirq - 1); |
| dev_info(&dev->dev, |
| "AMD756: dev [%04x:%04x], router PIRQ %d get IRQ %d\n", |
| dev->vendor, dev->device, pirq, irq); |
| return irq; |
| } |
| |
| static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) |
| { |
| dev_info(&dev->dev, |
| "AMD756: dev [%04x:%04x], router PIRQ %d set IRQ %d\n", |
| dev->vendor, dev->device, pirq, irq); |
| if (pirq <= 4) |
| write_config_nybble(router, 0x56, pirq - 1, irq); |
| return 1; |
| } |
| |
| /* |
| * PicoPower PT86C523 |
| */ |
| static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev, int pirq) |
| { |
| outb(0x10 + ((pirq - 1) >> 1), 0x24); |
| return ((pirq - 1) & 1) ? (inb(0x26) >> 4) : (inb(0x26) & 0xf); |
| } |
| |
| static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq, |
| int irq) |
| { |
| unsigned int x; |
| outb(0x10 + ((pirq - 1) >> 1), 0x24); |
| x = inb(0x26); |
| x = ((pirq - 1) & 1) ? ((x & 0x0f) | (irq << 4)) : ((x & 0xf0) | (irq)); |
| outb(x, 0x26); |
| return 1; |
| } |
| |
| #ifdef CONFIG_PCI_BIOS |
| |
| static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) |
| { |
| struct pci_dev *bridge; |
| int pin = pci_get_interrupt_pin(dev, &bridge); |
| return pcibios_set_irq_routing(bridge, pin, irq); |
| } |
| |
| #endif |
| |
| static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) |
| { |
| static struct pci_device_id __initdata pirq_440gx[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2) }, |
| { }, |
| }; |
| |
| /* 440GX has a proprietary PIRQ router -- don't use it */ |
| if (pci_dev_present(pirq_440gx)) |
| return 0; |
| |
| switch (device) { |
| case PCI_DEVICE_ID_INTEL_82371FB_0: |
| case PCI_DEVICE_ID_INTEL_82371SB_0: |
| case PCI_DEVICE_ID_INTEL_82371AB_0: |
| case PCI_DEVICE_ID_INTEL_82371MX: |
| case PCI_DEVICE_ID_INTEL_82443MX_0: |
| case PCI_DEVICE_ID_INTEL_82801AA_0: |
| case PCI_DEVICE_ID_INTEL_82801AB_0: |
| case PCI_DEVICE_ID_INTEL_82801BA_0: |
| case PCI_DEVICE_ID_INTEL_82801BA_10: |
| case PCI_DEVICE_ID_INTEL_82801CA_0: |
| case PCI_DEVICE_ID_INTEL_82801CA_12: |
| case PCI_DEVICE_ID_INTEL_82801DB_0: |
| case PCI_DEVICE_ID_INTEL_82801E_0: |
| case PCI_DEVICE_ID_INTEL_82801EB_0: |
| case PCI_DEVICE_ID_INTEL_ESB_1: |
| case PCI_DEVICE_ID_INTEL_ICH6_0: |
| case PCI_DEVICE_ID_INTEL_ICH6_1: |
| case PCI_DEVICE_ID_INTEL_ICH7_0: |
| case PCI_DEVICE_ID_INTEL_ICH7_1: |
| case PCI_DEVICE_ID_INTEL_ICH7_30: |
| case PCI_DEVICE_ID_INTEL_ICH7_31: |
| case PCI_DEVICE_ID_INTEL_ESB2_0: |
| case PCI_DEVICE_ID_INTEL_ICH8_0: |
| case PCI_DEVICE_ID_INTEL_ICH8_1: |
| case PCI_DEVICE_ID_INTEL_ICH8_2: |
| case PCI_DEVICE_ID_INTEL_ICH8_3: |
| case PCI_DEVICE_ID_INTEL_ICH8_4: |
| case PCI_DEVICE_ID_INTEL_ICH9_0: |
| case PCI_DEVICE_ID_INTEL_ICH9_1: |
| case PCI_DEVICE_ID_INTEL_ICH9_2: |
| case PCI_DEVICE_ID_INTEL_ICH9_3: |
| case PCI_DEVICE_ID_INTEL_ICH9_4: |
| case PCI_DEVICE_ID_INTEL_ICH9_5: |
| case PCI_DEVICE_ID_INTEL_TOLAPAI_0: |
| case PCI_DEVICE_ID_INTEL_ICH10_0: |
| case PCI_DEVICE_ID_INTEL_ICH10_1: |
| case PCI_DEVICE_ID_INTEL_ICH10_2: |
| case PCI_DEVICE_ID_INTEL_ICH10_3: |
| r->name = "PIIX/ICH"; |
| r->get = pirq_piix_get; |
| r->set = pirq_piix_set; |
| return 1; |
| } |
| |
| if ((device >= PCI_DEVICE_ID_INTEL_PCH_LPC_MIN) && |
| (device <= PCI_DEVICE_ID_INTEL_PCH_LPC_MAX)) { |
| r->name = "PIIX/ICH"; |
| r->get = pirq_piix_get; |
| r->set = pirq_piix_set; |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static __init int via_router_probe(struct irq_router *r, |
| struct pci_dev *router, u16 device) |
| { |
| /* FIXME: We should move some of the quirk fixup stuff here */ |
| |
| /* |
| * workarounds for some buggy BIOSes |
| */ |
| if (device == PCI_DEVICE_ID_VIA_82C586_0) { |
| switch (router->device) { |
| case PCI_DEVICE_ID_VIA_82C686: |
| /* |
| * Asus k7m bios wrongly reports 82C686A |
| * as 586-compatible |
| */ |
| device = PCI_DEVICE_ID_VIA_82C686; |
| break; |
| case PCI_DEVICE_ID_VIA_8235: |
| /** |
| * Asus a7v-x bios wrongly reports 8235 |
| * as 586-compatible |
| */ |
| device = PCI_DEVICE_ID_VIA_8235; |
| break; |
| case PCI_DEVICE_ID_VIA_8237: |
| /** |
| * Asus a7v600 bios wrongly reports 8237 |
| * as 586-compatible |
| */ |
| device = PCI_DEVICE_ID_VIA_8237; |
| break; |
| } |
| } |
| |
| switch (device) { |
| case PCI_DEVICE_ID_VIA_82C586_0: |
| r->name = "VIA"; |
| r->get = pirq_via586_get; |
| r->set = pirq_via586_set; |
| return 1; |
| case PCI_DEVICE_ID_VIA_82C596: |
| case PCI_DEVICE_ID_VIA_82C686: |
| case PCI_DEVICE_ID_VIA_8231: |
| case PCI_DEVICE_ID_VIA_8233A: |
| case PCI_DEVICE_ID_VIA_8235: |
| case PCI_DEVICE_ID_VIA_8237: |
| /* FIXME: add new ones for 8233/5 */ |
| r->name = "VIA"; |
| r->get = pirq_via_get; |
| r->set = pirq_via_set; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) |
| { |
| switch (device) { |
| case PCI_DEVICE_ID_VLSI_82C534: |
| r->name = "VLSI 82C534"; |
| r->get = pirq_vlsi_get; |
| r->set = pirq_vlsi_set; |
| return 1; |
| } |
| return 0; |
| } |
| |
| |
| static __init int serverworks_router_probe(struct irq_router *r, |
| struct pci_dev *router, u16 device) |
| { |
| switch (device) { |
| case PCI_DEVICE_ID_SERVERWORKS_OSB4: |
| case PCI_DEVICE_ID_SERVERWORKS_CSB5: |
| r->name = "ServerWorks"; |
| r->get = pirq_serverworks_get; |
| r->set = pirq_serverworks_set; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) |
| { |
| if (device != PCI_DEVICE_ID_SI_503) |
| return 0; |
| |
| r->name = "SIS"; |
| r->get = pirq_sis_get; |
| r->set = pirq_sis_set; |
| return 1; |
| } |
| |
| static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) |
| { |
| switch (device) { |
| case PCI_DEVICE_ID_CYRIX_5520: |
| r->name = "NatSemi"; |
| r->get = pirq_cyrix_get; |
| r->set = pirq_cyrix_set; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) |
| { |
| switch (device) { |
| case PCI_DEVICE_ID_OPTI_82C700: |
| r->name = "OPTI"; |
| r->get = pirq_opti_get; |
| r->set = pirq_opti_set; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) |
| { |
| switch (device) { |
| case PCI_DEVICE_ID_ITE_IT8330G_0: |
| r->name = "ITE"; |
| r->get = pirq_ite_get; |
| r->set = pirq_ite_set; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) |
| { |
| switch (device) { |
| case PCI_DEVICE_ID_AL_M1533: |
| case PCI_DEVICE_ID_AL_M1563: |
| r->name = "ALI"; |
| r->get = pirq_ali_get; |
| r->set = pirq_ali_set; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) |
| { |
| switch (device) { |
| case PCI_DEVICE_ID_AMD_VIPER_740B: |
| r->name = "AMD756"; |
| break; |
| case PCI_DEVICE_ID_AMD_VIPER_7413: |
| r->name = "AMD766"; |
| break; |
| case PCI_DEVICE_ID_AMD_VIPER_7443: |
| r->name = "AMD768"; |
| break; |
| default: |
| return 0; |
| } |
| r->get = pirq_amd756_get; |
| r->set = pirq_amd756_set; |
| return 1; |
| } |
| |
| static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) |
| { |
| switch (device) { |
| case PCI_DEVICE_ID_PICOPOWER_PT86C523: |
| r->name = "PicoPower PT86C523"; |
| r->get = pirq_pico_get; |
| r->set = pirq_pico_set; |
| return 1; |
| |
| case PCI_DEVICE_ID_PICOPOWER_PT86C523BBP: |
| r->name = "PicoPower PT86C523 rev. BB+"; |
| r->get = pirq_pico_get; |
| r->set = pirq_pico_set; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static __initdata struct irq_router_handler pirq_routers[] = { |
| { PCI_VENDOR_ID_INTEL, intel_router_probe }, |
| { PCI_VENDOR_ID_AL, ali_router_probe }, |
| { PCI_VENDOR_ID_ITE, ite_router_probe }, |
| { PCI_VENDOR_ID_VIA, via_router_probe }, |
| { PCI_VENDOR_ID_OPTI, opti_router_probe }, |
| { PCI_VENDOR_ID_SI, sis_router_probe }, |
| { PCI_VENDOR_ID_CYRIX, cyrix_router_probe }, |
| { PCI_VENDOR_ID_VLSI, vlsi_router_probe }, |
| { PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe }, |
| { PCI_VENDOR_ID_AMD, amd_router_probe }, |
| { PCI_VENDOR_ID_PICOPOWER, pico_router_probe }, |
| /* Someone with docs needs to add the ATI Radeon IGP */ |
| { 0, NULL } |
| }; |
| static struct irq_router pirq_router; |
| static struct pci_dev *pirq_router_dev; |
| |
| |
| /* |
| * FIXME: should we have an option to say "generic for |
| * chipset" ? |
| */ |
| |
| static void __init pirq_find_router(struct irq_router *r) |
| { |
| struct irq_routing_table *rt = pirq_table; |
| struct irq_router_handler *h; |
| |
| #ifdef CONFIG_PCI_BIOS |
| if (!rt->signature) { |
| printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n"); |
| r->set = pirq_bios_set; |
| r->name = "BIOS"; |
| return; |
| } |
| #endif |
| |
| /* Default unless a driver reloads it */ |
| r->name = "default"; |
| r->get = NULL; |
| r->set = NULL; |
| |
| DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for [%04x:%04x]\n", |
| rt->rtr_vendor, rt->rtr_device); |
| |
| pirq_router_dev = pci_get_bus_and_slot(rt->rtr_bus, rt->rtr_devfn); |
| if (!pirq_router_dev) { |
| DBG(KERN_DEBUG "PCI: Interrupt router not found at " |
| "%02x:%02x\n", rt->rtr_bus, rt->rtr_devfn); |
| return; |
| } |
| |
| for (h = pirq_routers; h->vendor; h++) { |
| /* First look for a router match */ |
| if (rt->rtr_vendor == h->vendor && |
| h->probe(r, pirq_router_dev, rt->rtr_device)) |
| break; |
| /* Fall back to a device match */ |
| if (pirq_router_dev->vendor == h->vendor && |
| h->probe(r, pirq_router_dev, pirq_router_dev->device)) |
| break; |
| } |
| dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x:%04x]\n", |
| pirq_router.name, |
| pirq_router_dev->vendor, pirq_router_dev->device); |
| |
| /* The device remains referenced for the kernel lifetime */ |
| } |
| |
| static struct irq_info *pirq_get_info(struct pci_dev *dev) |
| { |
| struct irq_routing_table *rt = pirq_table; |
| int entries = (rt->size - sizeof(struct irq_routing_table)) / |
| sizeof(struct irq_info); |
| struct irq_info *info; |
| |
| for (info = rt->slots; entries--; info++) |
| if (info->bus == dev->bus->number && |
| PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn)) |
| return info; |
| return NULL; |
| } |
| |
| static int pcibios_lookup_irq(struct pci_dev *dev, int assign) |
| { |
| u8 pin; |
| struct irq_info *info; |
| int i, pirq, newirq; |
| int irq = 0; |
| u32 mask; |
| struct irq_router *r = &pirq_router; |
| struct pci_dev *dev2 = NULL; |
| char *msg = NULL; |
| |
| /* Find IRQ pin */ |
| pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); |
| if (!pin) { |
| dev_dbg(&dev->dev, "no interrupt pin\n"); |
| return 0; |
| } |
| pin = pin - 1; |
| |
| /* Find IRQ routing entry */ |
| |
| if (!pirq_table) |
| return 0; |
| |
| info = pirq_get_info(dev); |
| if (!info) { |
| dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n", |
| 'A' + pin); |
| return 0; |
| } |
| pirq = info->irq[pin].link; |
| mask = info->irq[pin].bitmap; |
| if (!pirq) { |
| dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin); |
| return 0; |
| } |
| dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x", |
| 'A' + pin, pirq, mask, pirq_table->exclusive_irqs); |
| mask &= pcibios_irq_mask; |
| |
| /* Work around broken HP Pavilion Notebooks which assign USB to |
| IRQ 9 even though it is actually wired to IRQ 11 */ |
| |
| if (broken_hp_bios_irq9 && pirq == 0x59 && dev->irq == 9) { |
| dev->irq = 11; |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); |
| r->set(pirq_router_dev, dev, pirq, 11); |
| } |
| |
| /* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */ |
| if (acer_tm360_irqrouting && dev->irq == 11 && |
| dev->vendor == PCI_VENDOR_ID_O2) { |
| pirq = 0x68; |
| mask = 0x400; |
| dev->irq = r->get(pirq_router_dev, dev, pirq); |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); |
| } |
| |
| /* |
| * Find the best IRQ to assign: use the one |
| * reported by the device if possible. |
| */ |
| newirq = dev->irq; |
| if (newirq && !((1 << newirq) & mask)) { |
| if (pci_probe & PCI_USE_PIRQ_MASK) |
| newirq = 0; |
| else |
| dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask " |
| "%#x; try pci=usepirqmask\n", newirq, mask); |
| } |
| if (!newirq && assign) { |
| for (i = 0; i < 16; i++) { |
| if (!(mask & (1 << i))) |
| continue; |
| if (pirq_penalty[i] < pirq_penalty[newirq] && |
| can_request_irq(i, IRQF_SHARED)) |
| newirq = i; |
| } |
| } |
| dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin, newirq); |
| |
| /* Check if it is hardcoded */ |
| if ((pirq & 0xf0) == 0xf0) { |
| irq = pirq & 0xf; |
| msg = "hardcoded"; |
| } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ |
| ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) { |
| msg = "found"; |
| eisa_set_level_irq(irq); |
| } else if (newirq && r->set && |
| (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) { |
| if (r->set(pirq_router_dev, dev, pirq, newirq)) { |
| eisa_set_level_irq(newirq); |
| msg = "assigned"; |
| irq = newirq; |
| } |
| } |
| |
| if (!irq) { |
| if (newirq && mask == (1 << newirq)) { |
| msg = "guessed"; |
| irq = newirq; |
| } else { |
| dev_dbg(&dev->dev, "can't route interrupt\n"); |
| return 0; |
| } |
| } |
| dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin, irq); |
| |
| /* Update IRQ for all devices with the same pirq value */ |
| while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) { |
| pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin); |
| if (!pin) |
| continue; |
| pin--; |
| info = pirq_get_info(dev2); |
| if (!info) |
| continue; |
| if (info->irq[pin].link == pirq) { |
| /* |
| * We refuse to override the dev->irq |
| * information. Give a warning! |
| */ |
| if (dev2->irq && dev2->irq != irq && \ |
| (!(pci_probe & PCI_USE_PIRQ_MASK) || \ |
| ((1 << dev2->irq) & mask))) { |
| #ifndef CONFIG_PCI_MSI |
| dev_info(&dev2->dev, "IRQ routing conflict: " |
| "have IRQ %d, want IRQ %d\n", |
| dev2->irq, irq); |
| #endif |
| continue; |
| } |
| dev2->irq = irq; |
| pirq_penalty[irq]++; |
| if (dev != dev2) |
| dev_info(&dev->dev, "sharing IRQ %d with %s\n", |
| irq, pci_name(dev2)); |
| } |
| } |
| return 1; |
| } |
| |
| static void __init pcibios_fixup_irqs(void) |
| { |
| struct pci_dev *dev = NULL; |
| u8 pin; |
| |
| DBG(KERN_DEBUG "PCI: IRQ fixup\n"); |
| while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { |
| /* |
| * If the BIOS has set an out of range IRQ number, just |
| * ignore it. Also keep track of which IRQ's are |
| * already in use. |
| */ |
| if (dev->irq >= 16) { |
| dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq); |
| dev->irq = 0; |
| } |
| /* |
| * If the IRQ is already assigned to a PCI device, |
| * ignore its ISA use penalty |
| */ |
| if (pirq_penalty[dev->irq] >= 100 && |
| pirq_penalty[dev->irq] < 100000) |
| pirq_penalty[dev->irq] = 0; |
| pirq_penalty[dev->irq]++; |
| } |
| |
| dev = NULL; |
| while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { |
| pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); |
| #ifdef CONFIG_X86_IO_APIC |
| /* |
| * Recalculate IRQ numbers if we use the I/O APIC. |
| */ |
| if (io_apic_assign_pci_irqs) { |
| int irq; |
| |
| if (!pin) |
| continue; |
| |
| /* |
| * interrupt pins are numbered starting from 1 |
| */ |
| pin--; |
| irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, |
| PCI_SLOT(dev->devfn), pin); |
| /* |
| * Busses behind bridges are typically not listed in the |
| * MP-table. In this case we have to look up the IRQ |
| * based on the parent bus, parent slot, and pin number. |
| * The SMP code detects such bridged busses itself so we |
| * should get into this branch reliably. |
| */ |
| if (irq < 0 && dev->bus->parent) { |
| /* go back to the bridge */ |
| struct pci_dev *bridge = dev->bus->self; |
| int bus; |
| |
| pin = (pin + PCI_SLOT(dev->devfn)) % 4; |
| bus = bridge->bus->number; |
| irq = IO_APIC_get_PCI_irq_vector(bus, |
| PCI_SLOT(bridge->devfn), pin); |
| if (irq >= 0) |
| dev_warn(&dev->dev, |
| "using bridge %s INT %c to " |
| "get IRQ %d\n", |
| pci_name(bridge), |
| 'A' + pin, irq); |
| } |
| if (irq >= 0) { |
| dev_info(&dev->dev, |
| "PCI->APIC IRQ transform: INT %c " |
| "-> IRQ %d\n", |
| 'A' + pin, irq); |
| dev->irq = irq; |
| } |
| } |
| #endif |
| /* |
| * Still no IRQ? Try to lookup one... |
| */ |
| if (pin && !dev->irq) |
| pcibios_lookup_irq(dev, 0); |
| } |
| } |
| |
| /* |
| * Work around broken HP Pavilion Notebooks which assign USB to |
| * IRQ 9 even though it is actually wired to IRQ 11 |
| */ |
| static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d) |
| { |
| if (!broken_hp_bios_irq9) { |
| broken_hp_bios_irq9 = 1; |
| printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", |
| d->ident); |
| } |
| return 0; |
| } |
| |
| /* |
| * Work around broken Acer TravelMate 360 Notebooks which assign |
| * Cardbus to IRQ 11 even though it is actually wired to IRQ 10 |
| */ |
| static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d) |
| { |
| if (!acer_tm360_irqrouting) { |
| acer_tm360_irqrouting = 1; |
| printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", |
| d->ident); |
| } |
| return 0; |
| } |
| |
| static struct dmi_system_id __initdata pciirq_dmi_table[] = { |
| { |
| .callback = fix_broken_hp_bios_irq9, |
| .ident = "HP Pavilion N5400 Series Laptop", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), |
| DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"), |
| DMI_MATCH(DMI_PRODUCT_VERSION, |
| "HP Pavilion Notebook Model GE"), |
| DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), |
| }, |
| }, |
| { |
| .callback = fix_acer_tm360_irqrouting, |
| .ident = "Acer TravelMate 36x Laptop", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), |
| }, |
| }, |
| { } |
| }; |
| |
| int __init pcibios_irq_init(void) |
| { |
| DBG(KERN_DEBUG "PCI: IRQ init\n"); |
| |
| if (pcibios_enable_irq || raw_pci_ops == NULL) |
| return 0; |
| |
| dmi_check_system(pciirq_dmi_table); |
| |
| pirq_table = pirq_find_routing_table(); |
| |
| #ifdef CONFIG_PCI_BIOS |
| if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN)) |
| pirq_table = pcibios_get_irq_routing_table(); |
| #endif |
| if (pirq_table) { |
| pirq_peer_trick(); |
| pirq_find_router(&pirq_router); |
| if (pirq_table->exclusive_irqs) { |
| int i; |
| for (i = 0; i < 16; i++) |
| if (!(pirq_table->exclusive_irqs & (1 << i))) |
| pirq_penalty[i] += 100; |
| } |
| /* |
| * If we're using the I/O APIC, avoid using the PCI IRQ |
| * routing table |
| */ |
| if (io_apic_assign_pci_irqs) |
| pirq_table = NULL; |
| } |
| |
| pcibios_enable_irq = pirq_enable_irq; |
| |
| pcibios_fixup_irqs(); |
| return 0; |
| } |
| |
| static void pirq_penalize_isa_irq(int irq, int active) |
| { |
| /* |
| * If any ISAPnP device reports an IRQ in its list of possible |
| * IRQ's, we try to avoid assigning it to PCI devices. |
| */ |
| if (irq < 16) { |
| if (active) |
| pirq_penalty[irq] += 1000; |
| else |
| pirq_penalty[irq] += 100; |
| } |
| } |
| |
| void pcibios_penalize_isa_irq(int irq, int active) |
| { |
| #ifdef CONFIG_ACPI |
| if (!acpi_noirq) |
| acpi_penalize_isa_irq(irq, active); |
| else |
| #endif |
| pirq_penalize_isa_irq(irq, active); |
| } |
| |
| static int pirq_enable_irq(struct pci_dev *dev) |
| { |
| u8 pin; |
| struct pci_dev *temp_dev; |
| |
| pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); |
| if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) { |
| char *msg = ""; |
| |
| pin--; /* interrupt pins are numbered starting from 1 */ |
| |
| if (io_apic_assign_pci_irqs) { |
| int irq; |
| |
| irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin); |
| /* |
| * Busses behind bridges are typically not listed in the MP-table. |
| * In this case we have to look up the IRQ based on the parent bus, |
| * parent slot, and pin number. The SMP code detects such bridged |
| * busses itself so we should get into this branch reliably. |
| */ |
| temp_dev = dev; |
| while (irq < 0 && dev->bus->parent) { /* go back to the bridge */ |
| struct pci_dev *bridge = dev->bus->self; |
| |
| pin = (pin + PCI_SLOT(dev->devfn)) % 4; |
| irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, |
| PCI_SLOT(bridge->devfn), pin); |
| if (irq >= 0) |
| dev_warn(&dev->dev, "using bridge %s " |
| "INT %c to get IRQ %d\n", |
| pci_name(bridge), 'A' + pin, |
| irq); |
| dev = bridge; |
| } |
| dev = temp_dev; |
| if (irq >= 0) { |
| dev_info(&dev->dev, "PCI->APIC IRQ transform: " |
| "INT %c -> IRQ %d\n", 'A' + pin, irq); |
| dev->irq = irq; |
| return 0; |
| } else |
| msg = "; probably buggy MP table"; |
| } else if (pci_probe & PCI_BIOS_IRQ_SCAN) |
| msg = ""; |
| else |
| msg = "; please try using pci=biosirq"; |
| |
| /* |
| * With IDE legacy devices the IRQ lookup failure is not |
| * a problem.. |
| */ |
| if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && |
| !(dev->class & 0x5)) |
| return 0; |
| |
| dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n", |
| 'A' + pin, msg); |
| } |
| return 0; |
| } |