| /* |
| * linux/arch/arm/mach-omap2/board-am3517evm.c |
| * |
| * Copyright (C) 2009 Texas Instruments Incorporated |
| * Author: Ranjith Lohithakshan <ranjithl@ti.com> |
| * |
| * Based on mach-omap2/board-omap3evm.c |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation version 2. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, |
| * whether express or implied; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/clk.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/i2c/pca953x.h> |
| #include <linux/can/platform/ti_hecc.h> |
| #include <linux/davinci_emac.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/am35xx.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| |
| #include <plat/board.h> |
| #include <plat/common.h> |
| #include <plat/usb.h> |
| #include <video/omapdss.h> |
| #include <video/omap-panel-generic-dpi.h> |
| |
| #include "mux.h" |
| #include "control.h" |
| |
| #define AM35XX_EVM_MDIO_FREQUENCY (1000000) |
| |
| static struct mdio_platform_data am3517_evm_mdio_pdata = { |
| .bus_freq = AM35XX_EVM_MDIO_FREQUENCY, |
| }; |
| |
| static struct resource am3517_mdio_resources[] = { |
| { |
| .start = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, |
| .end = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET + |
| SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device am3517_mdio_device = { |
| .name = "davinci_mdio", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(am3517_mdio_resources), |
| .resource = am3517_mdio_resources, |
| .dev.platform_data = &am3517_evm_mdio_pdata, |
| }; |
| |
| static struct emac_platform_data am3517_evm_emac_pdata = { |
| .rmii_en = 1, |
| }; |
| |
| static struct resource am3517_emac_resources[] = { |
| { |
| .start = AM35XX_IPSS_EMAC_BASE, |
| .end = AM35XX_IPSS_EMAC_BASE + 0x2FFFF, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = INT_35XX_EMAC_C0_RXTHRESH_IRQ, |
| .end = INT_35XX_EMAC_C0_RXTHRESH_IRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = INT_35XX_EMAC_C0_RX_PULSE_IRQ, |
| .end = INT_35XX_EMAC_C0_RX_PULSE_IRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = INT_35XX_EMAC_C0_TX_PULSE_IRQ, |
| .end = INT_35XX_EMAC_C0_TX_PULSE_IRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = INT_35XX_EMAC_C0_MISC_PULSE_IRQ, |
| .end = INT_35XX_EMAC_C0_MISC_PULSE_IRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device am3517_emac_device = { |
| .name = "davinci_emac", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(am3517_emac_resources), |
| .resource = am3517_emac_resources, |
| }; |
| |
| static void am3517_enable_ethernet_int(void) |
| { |
| u32 regval; |
| |
| regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); |
| regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | |
| AM35XX_CPGMAC_C0_TX_PULSE_CLR | |
| AM35XX_CPGMAC_C0_MISC_PULSE_CLR | |
| AM35XX_CPGMAC_C0_RX_THRESH_CLR); |
| omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); |
| regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); |
| } |
| |
| static void am3517_disable_ethernet_int(void) |
| { |
| u32 regval; |
| |
| regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); |
| regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | |
| AM35XX_CPGMAC_C0_TX_PULSE_CLR); |
| omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); |
| regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); |
| } |
| |
| static void am3517_evm_ethernet_init(struct emac_platform_data *pdata) |
| { |
| unsigned int regval; |
| |
| pdata->ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET; |
| pdata->ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET; |
| pdata->ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET; |
| pdata->ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE; |
| pdata->version = EMAC_VERSION_2; |
| pdata->hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR; |
| pdata->interrupt_enable = am3517_enable_ethernet_int; |
| pdata->interrupt_disable = am3517_disable_ethernet_int; |
| am3517_emac_device.dev.platform_data = pdata; |
| platform_device_register(&am3517_emac_device); |
| platform_device_register(&am3517_mdio_device); |
| clk_add_alias(NULL, dev_name(&am3517_mdio_device.dev), |
| NULL, &am3517_emac_device.dev); |
| |
| regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); |
| regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); |
| omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); |
| regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); |
| |
| return ; |
| } |
| |
| |
| |
| #define LCD_PANEL_PWR 176 |
| #define LCD_PANEL_BKLIGHT_PWR 182 |
| #define LCD_PANEL_PWM 181 |
| |
| static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = { |
| { |
| I2C_BOARD_INFO("s35390a", 0x30), |
| }, |
| }; |
| |
| /* |
| * RTC - S35390A |
| */ |
| #define GPIO_RTCS35390A_IRQ 55 |
| |
| static void __init am3517_evm_rtc_init(void) |
| { |
| int r; |
| |
| omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP); |
| |
| r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq"); |
| if (r < 0) { |
| printk(KERN_WARNING "failed to request GPIO#%d\n", |
| GPIO_RTCS35390A_IRQ); |
| return; |
| } |
| |
| am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ); |
| } |
| |
| /* |
| * I2C GPIO Expander - TCA6416 |
| */ |
| |
| /* Mounted on Base-Board */ |
| static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = { |
| .gpio_base = OMAP_MAX_GPIO_LINES, |
| }; |
| static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = { |
| { |
| I2C_BOARD_INFO("tlv320aic23", 0x1A), |
| }, |
| { |
| I2C_BOARD_INFO("tca6416", 0x21), |
| .platform_data = &am3517evm_gpio_expander_info_0, |
| }, |
| }; |
| |
| /* Mounted on UI Card */ |
| static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = { |
| .gpio_base = OMAP_MAX_GPIO_LINES + 16, |
| }; |
| static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = { |
| .gpio_base = OMAP_MAX_GPIO_LINES + 32, |
| }; |
| static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = { |
| { |
| I2C_BOARD_INFO("tca6416", 0x20), |
| .platform_data = &am3517evm_ui_gpio_expander_info_1, |
| }, |
| { |
| I2C_BOARD_INFO("tca6416", 0x21), |
| .platform_data = &am3517evm_ui_gpio_expander_info_2, |
| }, |
| }; |
| |
| static int __init am3517_evm_i2c_init(void) |
| { |
| omap_register_i2c_bus(1, 400, NULL, 0); |
| omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo, |
| ARRAY_SIZE(am3517evm_i2c2_boardinfo)); |
| omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo, |
| ARRAY_SIZE(am3517evm_i2c3_boardinfo)); |
| |
| return 0; |
| } |
| |
| static int lcd_enabled; |
| static int dvi_enabled; |
| |
| #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ |
| defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) |
| static struct gpio am3517_evm_dss_gpios[] __initdata = { |
| /* GPIO 182 = LCD Backlight Power */ |
| { LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" }, |
| /* GPIO 181 = LCD Panel PWM */ |
| { LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, |
| /* GPIO 176 = LCD Panel Power enable pin */ |
| { LCD_PANEL_PWR, GPIOF_OUT_INIT_HIGH, "dvi enable" }, |
| }; |
| |
| static void __init am3517_evm_display_init(void) |
| { |
| int r; |
| |
| omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP); |
| omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN); |
| omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN); |
| |
| r = gpio_request_array(am3517_evm_dss_gpios, |
| ARRAY_SIZE(am3517_evm_dss_gpios)); |
| if (r) { |
| printk(KERN_ERR "failed to get DSS panel control GPIOs\n"); |
| return; |
| } |
| |
| printk(KERN_INFO "Display initialized successfully\n"); |
| } |
| #else |
| static void __init am3517_evm_display_init(void) {} |
| #endif |
| |
| static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev) |
| { |
| if (dvi_enabled) { |
| printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); |
| return -EINVAL; |
| } |
| gpio_set_value(LCD_PANEL_PWR, 1); |
| lcd_enabled = 1; |
| |
| return 0; |
| } |
| |
| static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev) |
| { |
| gpio_set_value(LCD_PANEL_PWR, 0); |
| lcd_enabled = 0; |
| } |
| |
| static struct panel_generic_dpi_data lcd_panel = { |
| .name = "sharp_lq", |
| .platform_enable = am3517_evm_panel_enable_lcd, |
| .platform_disable = am3517_evm_panel_disable_lcd, |
| }; |
| |
| static struct omap_dss_device am3517_evm_lcd_device = { |
| .type = OMAP_DISPLAY_TYPE_DPI, |
| .name = "lcd", |
| .driver_name = "generic_dpi_panel", |
| .data = &lcd_panel, |
| .phy.dpi.data_lines = 16, |
| }; |
| |
| static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev) |
| { |
| return 0; |
| } |
| |
| static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev) |
| { |
| } |
| |
| static struct omap_dss_device am3517_evm_tv_device = { |
| .type = OMAP_DISPLAY_TYPE_VENC, |
| .name = "tv", |
| .driver_name = "venc", |
| .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, |
| .platform_enable = am3517_evm_panel_enable_tv, |
| .platform_disable = am3517_evm_panel_disable_tv, |
| }; |
| |
| static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev) |
| { |
| if (lcd_enabled) { |
| printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); |
| return -EINVAL; |
| } |
| dvi_enabled = 1; |
| |
| return 0; |
| } |
| |
| static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev) |
| { |
| dvi_enabled = 0; |
| } |
| |
| static struct panel_generic_dpi_data dvi_panel = { |
| .name = "generic", |
| .platform_enable = am3517_evm_panel_enable_dvi, |
| .platform_disable = am3517_evm_panel_disable_dvi, |
| }; |
| |
| static struct omap_dss_device am3517_evm_dvi_device = { |
| .type = OMAP_DISPLAY_TYPE_DPI, |
| .name = "dvi", |
| .driver_name = "generic_dpi_panel", |
| .data = &dvi_panel, |
| .phy.dpi.data_lines = 24, |
| }; |
| |
| static struct omap_dss_device *am3517_evm_dss_devices[] = { |
| &am3517_evm_lcd_device, |
| &am3517_evm_tv_device, |
| &am3517_evm_dvi_device, |
| }; |
| |
| static struct omap_dss_board_info am3517_evm_dss_data = { |
| .num_devices = ARRAY_SIZE(am3517_evm_dss_devices), |
| .devices = am3517_evm_dss_devices, |
| .default_device = &am3517_evm_lcd_device, |
| }; |
| |
| /* |
| * Board initialization |
| */ |
| static void __init am3517_evm_init_early(void) |
| { |
| omap2_init_common_infrastructure(); |
| } |
| |
| static struct omap_musb_board_data musb_board_data = { |
| .interface_type = MUSB_INTERFACE_ULPI, |
| .mode = MUSB_OTG, |
| .power = 500, |
| .set_phy_power = am35x_musb_phy_power, |
| .clear_irq = am35x_musb_clear_irq, |
| .set_mode = am35x_set_mode, |
| .reset = am35x_musb_reset, |
| }; |
| |
| static __init void am3517_evm_musb_init(void) |
| { |
| u32 devconf2; |
| |
| /* |
| * Set up USB clock/mode in the DEVCONF2 register. |
| */ |
| devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); |
| |
| /* USB2.0 PHY reference clock is 13 MHz */ |
| devconf2 &= ~(CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE); |
| devconf2 |= CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | CONF2_VBDTCTEN |
| | CONF2_DATPOL; |
| |
| omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); |
| |
| usb_musb_init(&musb_board_data); |
| } |
| |
| static const struct usbhs_omap_board_data usbhs_bdata __initconst = { |
| .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, |
| #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ |
| defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) |
| .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, |
| #else |
| .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, |
| #endif |
| .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, |
| |
| .phy_reset = true, |
| .reset_gpio_port[0] = 57, |
| .reset_gpio_port[1] = -EINVAL, |
| .reset_gpio_port[2] = -EINVAL |
| }; |
| |
| #ifdef CONFIG_OMAP_MUX |
| static struct omap_board_mux board_mux[] __initdata = { |
| /* USB OTG DRVVBUS offset = 0x212 */ |
| OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), |
| { .reg_offset = OMAP_MUX_TERMINATOR }, |
| }; |
| #endif |
| |
| |
| static struct resource am3517_hecc_resources[] = { |
| { |
| .start = AM35XX_IPSS_HECC_BASE, |
| .end = AM35XX_IPSS_HECC_BASE + 0x3FFF, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = INT_35XX_HECC0_IRQ, |
| .end = INT_35XX_HECC0_IRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device am3517_hecc_device = { |
| .name = "ti_hecc", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(am3517_hecc_resources), |
| .resource = am3517_hecc_resources, |
| }; |
| |
| static struct ti_hecc_platform_data am3517_evm_hecc_pdata = { |
| .scc_hecc_offset = AM35XX_HECC_SCC_HECC_OFFSET, |
| .scc_ram_offset = AM35XX_HECC_SCC_RAM_OFFSET, |
| .hecc_ram_offset = AM35XX_HECC_RAM_OFFSET, |
| .mbx_offset = AM35XX_HECC_MBOX_OFFSET, |
| .int_line = AM35XX_HECC_INT_LINE, |
| .version = AM35XX_HECC_VERSION, |
| }; |
| |
| static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata) |
| { |
| am3517_hecc_device.dev.platform_data = pdata; |
| platform_device_register(&am3517_hecc_device); |
| } |
| |
| static struct omap_board_config_kernel am3517_evm_config[] __initdata = { |
| }; |
| |
| static void __init am3517_evm_init(void) |
| { |
| omap_board_config = am3517_evm_config; |
| omap_board_config_size = ARRAY_SIZE(am3517_evm_config); |
| omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); |
| |
| am3517_evm_i2c_init(); |
| omap_display_init(&am3517_evm_dss_data); |
| omap_serial_init(); |
| omap_sdrc_init(NULL, NULL); |
| |
| /* Configure GPIO for EHCI port */ |
| omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); |
| usbhs_init(&usbhs_bdata); |
| am3517_evm_hecc_init(&am3517_evm_hecc_pdata); |
| /* DSS */ |
| am3517_evm_display_init(); |
| |
| /* RTC - S35390A */ |
| am3517_evm_rtc_init(); |
| |
| i2c_register_board_info(1, am3517evm_i2c1_boardinfo, |
| ARRAY_SIZE(am3517evm_i2c1_boardinfo)); |
| /*Ethernet*/ |
| am3517_evm_ethernet_init(&am3517_evm_emac_pdata); |
| |
| /* MUSB */ |
| am3517_evm_musb_init(); |
| } |
| |
| MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") |
| .boot_params = 0x80000100, |
| .reserve = omap_reserve, |
| .map_io = omap3_map_io, |
| .init_early = am3517_evm_init_early, |
| .init_irq = omap3_init_irq, |
| .init_machine = am3517_evm_init, |
| .timer = &omap3_timer, |
| MACHINE_END |