| /* |
| * MPC832x RDB Device Tree Source |
| * |
| * Copyright 2007 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "MPC8323ERDB"; |
| compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8323@0 { |
| device_type = "cpu"; |
| reg = <0x0>; |
| d-cache-line-size = <0x20>; // 32 bytes |
| i-cache-line-size = <0x20>; // 32 bytes |
| d-cache-size = <16384>; // L1, 16K |
| i-cache-size = <16384>; // L1, 16K |
| timebase-frequency = <0>; |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x04000000>; |
| }; |
| |
| soc8323@e0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "simple-bus"; |
| ranges = <0x0 0xe0000000 0x00100000>; |
| reg = <0xe0000000 0x00000200>; |
| bus-frequency = <0>; |
| |
| wdt@200 { |
| device_type = "watchdog"; |
| compatible = "mpc83xx_wdt"; |
| reg = <0x200 0x100>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <14 0x8>; |
| interrupt-parent = <&ipic>; |
| dfsrr; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <9 0x8>; |
| interrupt-parent = <&ipic>; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <10 0x8>; |
| interrupt-parent = <&ipic>; |
| }; |
| |
| dma@82a8 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8323-dma", "fsl,elo-dma"; |
| reg = <0x82a8 4>; |
| ranges = <0 0x8100 0x1a8>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; |
| reg = <0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; |
| reg = <0x180 0x28>; |
| cell-index = <3>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| }; |
| }; |
| |
| crypto@30000 { |
| compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; |
| reg = <0x30000 0x10000>; |
| interrupts = <11 0x8>; |
| interrupt-parent = <&ipic>; |
| fsl,num-channels = <1>; |
| fsl,channel-fifo-len = <24>; |
| fsl,exec-units-mask = <0x4c>; |
| fsl,descriptor-types-mask = <0x0122003f>; |
| }; |
| |
| ipic:pic@700 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x700 0x100>; |
| device_type = "ipic"; |
| }; |
| |
| par_io@1400 { |
| reg = <0x1400 0x100>; |
| device_type = "par_io"; |
| num-ports = <7>; |
| |
| ucc2pio:ucc_pin@02 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 3 4 3 0 2 0 /* MDIO */ |
| 3 5 1 0 2 0 /* MDC */ |
| 3 21 2 0 1 0 /* RX_CLK (CLK16) */ |
| 3 23 2 0 1 0 /* TX_CLK (CLK3) */ |
| 0 18 1 0 1 0 /* TxD0 */ |
| 0 19 1 0 1 0 /* TxD1 */ |
| 0 20 1 0 1 0 /* TxD2 */ |
| 0 21 1 0 1 0 /* TxD3 */ |
| 0 22 2 0 1 0 /* RxD0 */ |
| 0 23 2 0 1 0 /* RxD1 */ |
| 0 24 2 0 1 0 /* RxD2 */ |
| 0 25 2 0 1 0 /* RxD3 */ |
| 0 26 2 0 1 0 /* RX_ER */ |
| 0 27 1 0 1 0 /* TX_ER */ |
| 0 28 2 0 1 0 /* RX_DV */ |
| 0 29 2 0 1 0 /* COL */ |
| 0 30 1 0 1 0 /* TX_EN */ |
| 0 31 2 0 1 0>; /* CRS */ |
| }; |
| ucc3pio:ucc_pin@03 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0 13 2 0 1 0 /* RX_CLK (CLK9) */ |
| 3 24 2 0 1 0 /* TX_CLK (CLK10) */ |
| 1 0 1 0 1 0 /* TxD0 */ |
| 1 1 1 0 1 0 /* TxD1 */ |
| 1 2 1 0 1 0 /* TxD2 */ |
| 1 3 1 0 1 0 /* TxD3 */ |
| 1 4 2 0 1 0 /* RxD0 */ |
| 1 5 2 0 1 0 /* RxD1 */ |
| 1 6 2 0 1 0 /* RxD2 */ |
| 1 7 2 0 1 0 /* RxD3 */ |
| 1 8 2 0 1 0 /* RX_ER */ |
| 1 9 1 0 1 0 /* TX_ER */ |
| 1 10 2 0 1 0 /* RX_DV */ |
| 1 11 2 0 1 0 /* COL */ |
| 1 12 1 0 1 0 /* TX_EN */ |
| 1 13 2 0 1 0>; /* CRS */ |
| }; |
| }; |
| }; |
| |
| qe@e0100000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "qe"; |
| compatible = "fsl,qe"; |
| ranges = <0x0 0xe0100000 0x00100000>; |
| reg = <0xe0100000 0x480>; |
| brg-frequency = <0>; |
| bus-frequency = <198000000>; |
| |
| muram@10000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,qe-muram", "fsl,cpm-muram"; |
| ranges = <0x0 0x00010000 0x00004000>; |
| |
| data-only@0 { |
| compatible = "fsl,qe-muram-data", |
| "fsl,cpm-muram-data"; |
| reg = <0x0 0x4000>; |
| }; |
| }; |
| |
| spi@4c0 { |
| cell-index = <0>; |
| compatible = "fsl,spi"; |
| reg = <0x4c0 0x40>; |
| interrupts = <2>; |
| interrupt-parent = <&qeic>; |
| mode = "cpu-qe"; |
| }; |
| |
| spi@500 { |
| cell-index = <1>; |
| compatible = "fsl,spi"; |
| reg = <0x500 0x40>; |
| interrupts = <1>; |
| interrupt-parent = <&qeic>; |
| mode = "cpu"; |
| }; |
| |
| enet0: ucc@3000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <2>; |
| reg = <0x3000 0x200>; |
| interrupts = <33>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "clk16"; |
| tx-clock-name = "clk3"; |
| phy-handle = <&phy00>; |
| pio-handle = <&ucc2pio>; |
| }; |
| |
| enet1: ucc@2200 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <3>; |
| reg = <0x2200 0x200>; |
| interrupts = <34>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "clk9"; |
| tx-clock-name = "clk10"; |
| phy-handle = <&phy04>; |
| pio-handle = <&ucc3pio>; |
| }; |
| |
| mdio@3120 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x3120 0x18>; |
| compatible = "fsl,ucc-mdio"; |
| |
| phy00:ethernet-phy@00 { |
| interrupt-parent = <&ipic>; |
| interrupts = <0>; |
| reg = <0x0>; |
| device_type = "ethernet-phy"; |
| }; |
| phy04:ethernet-phy@04 { |
| interrupt-parent = <&ipic>; |
| interrupts = <0>; |
| reg = <0x4>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| qeic:interrupt-controller@80 { |
| interrupt-controller; |
| compatible = "fsl,qe-ic"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| reg = <0x80 0x80>; |
| big-endian; |
| interrupts = <32 0x8 33 0x8>; //high:32 low:33 |
| interrupt-parent = <&ipic>; |
| }; |
| }; |
| |
| pci0: pci@e0008500 { |
| cell-index = <1>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x10 AD16 (USB) */ |
| 0x8000 0x0 0x0 0x1 &ipic 17 0x8 |
| |
| /* IDSEL 0x11 AD17 (Mini1)*/ |
| 0x8800 0x0 0x0 0x1 &ipic 18 0x8 |
| 0x8800 0x0 0x0 0x2 &ipic 19 0x8 |
| 0x8800 0x0 0x0 0x3 &ipic 20 0x8 |
| 0x8800 0x0 0x0 0x4 &ipic 48 0x8 |
| |
| /* IDSEL 0x12 AD18 (PCI/Mini2) */ |
| 0x9000 0x0 0x0 0x1 &ipic 19 0x8 |
| 0x9000 0x0 0x0 0x2 &ipic 20 0x8 |
| 0x9000 0x0 0x0 0x3 &ipic 48 0x8 |
| 0x9000 0x0 0x0 0x4 &ipic 17 0x8>; |
| |
| interrupt-parent = <&ipic>; |
| interrupts = <66 0x8>; |
| bus-range = <0x0 0x0>; |
| ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 |
| 0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 |
| 0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>; |
| clock-frequency = <0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xe0008500 0x100 /* internal registers */ |
| 0xe0008300 0x8>; /* config space access registers */ |
| compatible = "fsl,mpc8349-pci"; |
| device_type = "pci"; |
| }; |
| }; |