| /* |
| * IBM eServer eHCA Infiniband device driver for Linux on POWER |
| * |
| * HCA query functions |
| * |
| * Authors: Heiko J Schick <schickhj@de.ibm.com> |
| * Christoph Raisch <raisch@de.ibm.com> |
| * |
| * Copyright (c) 2005 IBM Corporation |
| * |
| * All rights reserved. |
| * |
| * This source code is distributed under a dual license of GPL v2.0 and OpenIB |
| * BSD. |
| * |
| * OpenIB BSD License |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials |
| * provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER |
| * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "ehca_tools.h" |
| #include "ehca_iverbs.h" |
| #include "hcp_if.h" |
| |
| static unsigned int limit_uint(unsigned int value) |
| { |
| return min_t(unsigned int, value, INT_MAX); |
| } |
| |
| int ehca_query_device(struct ib_device *ibdev, struct ib_device_attr *props) |
| { |
| int i, ret = 0; |
| struct ehca_shca *shca = container_of(ibdev, struct ehca_shca, |
| ib_device); |
| struct hipz_query_hca *rblock; |
| |
| static const u32 cap_mapping[] = { |
| IB_DEVICE_RESIZE_MAX_WR, HCA_CAP_WQE_RESIZE, |
| IB_DEVICE_BAD_PKEY_CNTR, HCA_CAP_BAD_P_KEY_CTR, |
| IB_DEVICE_BAD_QKEY_CNTR, HCA_CAP_Q_KEY_VIOL_CTR, |
| IB_DEVICE_RAW_MULTI, HCA_CAP_RAW_PACKET_MCAST, |
| IB_DEVICE_AUTO_PATH_MIG, HCA_CAP_AUTO_PATH_MIG, |
| IB_DEVICE_CHANGE_PHY_PORT, HCA_CAP_SQD_RTS_PORT_CHANGE, |
| IB_DEVICE_UD_AV_PORT_ENFORCE, HCA_CAP_AH_PORT_NR_CHECK, |
| IB_DEVICE_CURR_QP_STATE_MOD, HCA_CAP_CUR_QP_STATE_MOD, |
| IB_DEVICE_SHUTDOWN_PORT, HCA_CAP_SHUTDOWN_PORT, |
| IB_DEVICE_INIT_TYPE, HCA_CAP_INIT_TYPE, |
| IB_DEVICE_PORT_ACTIVE_EVENT, HCA_CAP_PORT_ACTIVE_EVENT, |
| }; |
| |
| rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); |
| if (!rblock) { |
| ehca_err(&shca->ib_device, "Can't allocate rblock memory."); |
| return -ENOMEM; |
| } |
| |
| if (hipz_h_query_hca(shca->ipz_hca_handle, rblock) != H_SUCCESS) { |
| ehca_err(&shca->ib_device, "Can't query device properties"); |
| ret = -EINVAL; |
| goto query_device1; |
| } |
| |
| memset(props, 0, sizeof(struct ib_device_attr)); |
| props->page_size_cap = shca->hca_cap_mr_pgsize; |
| props->fw_ver = rblock->hw_ver; |
| props->max_mr_size = rblock->max_mr_size; |
| props->vendor_id = rblock->vendor_id >> 8; |
| props->vendor_part_id = rblock->vendor_part_id >> 16; |
| props->hw_ver = rblock->hw_ver; |
| props->max_qp = limit_uint(rblock->max_qp); |
| props->max_qp_wr = limit_uint(rblock->max_wqes_wq); |
| props->max_sge = limit_uint(rblock->max_sge); |
| props->max_sge_rd = limit_uint(rblock->max_sge_rd); |
| props->max_cq = limit_uint(rblock->max_cq); |
| props->max_cqe = limit_uint(rblock->max_cqe); |
| props->max_mr = limit_uint(rblock->max_mr); |
| props->max_mw = limit_uint(rblock->max_mw); |
| props->max_pd = limit_uint(rblock->max_pd); |
| props->max_ah = limit_uint(rblock->max_ah); |
| props->max_ee = limit_uint(rblock->max_rd_ee_context); |
| props->max_rdd = limit_uint(rblock->max_rd_domain); |
| props->max_fmr = limit_uint(rblock->max_mr); |
| props->max_qp_rd_atom = limit_uint(rblock->max_rr_qp); |
| props->max_ee_rd_atom = limit_uint(rblock->max_rr_ee_context); |
| props->max_res_rd_atom = limit_uint(rblock->max_rr_hca); |
| props->max_qp_init_rd_atom = limit_uint(rblock->max_act_wqs_qp); |
| props->max_ee_init_rd_atom = limit_uint(rblock->max_act_wqs_ee_context); |
| |
| if (EHCA_BMASK_GET(HCA_CAP_SRQ, shca->hca_cap)) { |
| props->max_srq = limit_uint(props->max_qp); |
| props->max_srq_wr = limit_uint(props->max_qp_wr); |
| props->max_srq_sge = 3; |
| } |
| |
| props->max_pkeys = 16; |
| /* Some FW versions say 0 here; insert sensible value in that case */ |
| props->local_ca_ack_delay = rblock->local_ca_ack_delay ? |
| min_t(u8, rblock->local_ca_ack_delay, 255) : 12; |
| props->max_raw_ipv6_qp = limit_uint(rblock->max_raw_ipv6_qp); |
| props->max_raw_ethy_qp = limit_uint(rblock->max_raw_ethy_qp); |
| props->max_mcast_grp = limit_uint(rblock->max_mcast_grp); |
| props->max_mcast_qp_attach = limit_uint(rblock->max_mcast_qp_attach); |
| props->max_total_mcast_qp_attach |
| = limit_uint(rblock->max_total_mcast_qp_attach); |
| |
| /* translate device capabilities */ |
| props->device_cap_flags = IB_DEVICE_SYS_IMAGE_GUID | |
| IB_DEVICE_RC_RNR_NAK_GEN | IB_DEVICE_N_NOTIFY_CQ; |
| for (i = 0; i < ARRAY_SIZE(cap_mapping); i += 2) |
| if (rblock->hca_cap_indicators & cap_mapping[i + 1]) |
| props->device_cap_flags |= cap_mapping[i]; |
| |
| query_device1: |
| ehca_free_fw_ctrlblock(rblock); |
| |
| return ret; |
| } |
| |
| static enum ib_mtu map_mtu(struct ehca_shca *shca, u32 fw_mtu) |
| { |
| switch (fw_mtu) { |
| case 0x1: |
| return IB_MTU_256; |
| case 0x2: |
| return IB_MTU_512; |
| case 0x3: |
| return IB_MTU_1024; |
| case 0x4: |
| return IB_MTU_2048; |
| case 0x5: |
| return IB_MTU_4096; |
| default: |
| ehca_err(&shca->ib_device, "Unknown MTU size: %x.", |
| fw_mtu); |
| return 0; |
| } |
| } |
| |
| static u8 map_number_of_vls(struct ehca_shca *shca, u32 vl_cap) |
| { |
| switch (vl_cap) { |
| case 0x1: |
| return 1; |
| case 0x2: |
| return 2; |
| case 0x3: |
| return 4; |
| case 0x4: |
| return 8; |
| case 0x5: |
| return 15; |
| default: |
| ehca_err(&shca->ib_device, "invalid Vl Capability: %x.", |
| vl_cap); |
| return 0; |
| } |
| } |
| |
| int ehca_query_port(struct ib_device *ibdev, |
| u8 port, struct ib_port_attr *props) |
| { |
| int ret = 0; |
| u64 h_ret; |
| struct ehca_shca *shca = container_of(ibdev, struct ehca_shca, |
| ib_device); |
| struct hipz_query_port *rblock; |
| |
| rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); |
| if (!rblock) { |
| ehca_err(&shca->ib_device, "Can't allocate rblock memory."); |
| return -ENOMEM; |
| } |
| |
| h_ret = hipz_h_query_port(shca->ipz_hca_handle, port, rblock); |
| if (h_ret != H_SUCCESS) { |
| ehca_err(&shca->ib_device, "Can't query port properties"); |
| ret = -EINVAL; |
| goto query_port1; |
| } |
| |
| memset(props, 0, sizeof(struct ib_port_attr)); |
| |
| props->active_mtu = props->max_mtu = map_mtu(shca, rblock->max_mtu); |
| props->port_cap_flags = rblock->capability_mask; |
| props->gid_tbl_len = rblock->gid_tbl_len; |
| if (rblock->max_msg_sz) |
| props->max_msg_sz = rblock->max_msg_sz; |
| else |
| props->max_msg_sz = 0x1 << 31; |
| props->bad_pkey_cntr = rblock->bad_pkey_cntr; |
| props->qkey_viol_cntr = rblock->qkey_viol_cntr; |
| props->pkey_tbl_len = rblock->pkey_tbl_len; |
| props->lid = rblock->lid; |
| props->sm_lid = rblock->sm_lid; |
| props->lmc = rblock->lmc; |
| props->sm_sl = rblock->sm_sl; |
| props->subnet_timeout = rblock->subnet_timeout; |
| props->init_type_reply = rblock->init_type_reply; |
| props->max_vl_num = map_number_of_vls(shca, rblock->vl_cap); |
| |
| if (rblock->state && rblock->phys_width) { |
| props->phys_state = rblock->phys_pstate; |
| props->state = rblock->phys_state; |
| props->active_width = rblock->phys_width; |
| props->active_speed = rblock->phys_speed; |
| } else { |
| /* old firmware releases don't report physical |
| * port info, so use default values |
| */ |
| props->phys_state = 5; |
| props->state = rblock->state; |
| props->active_width = IB_WIDTH_12X; |
| props->active_speed = 0x1; |
| } |
| |
| query_port1: |
| ehca_free_fw_ctrlblock(rblock); |
| |
| return ret; |
| } |
| |
| int ehca_query_sma_attr(struct ehca_shca *shca, |
| u8 port, struct ehca_sma_attr *attr) |
| { |
| int ret = 0; |
| u64 h_ret; |
| struct hipz_query_port *rblock; |
| |
| rblock = ehca_alloc_fw_ctrlblock(GFP_ATOMIC); |
| if (!rblock) { |
| ehca_err(&shca->ib_device, "Can't allocate rblock memory."); |
| return -ENOMEM; |
| } |
| |
| h_ret = hipz_h_query_port(shca->ipz_hca_handle, port, rblock); |
| if (h_ret != H_SUCCESS) { |
| ehca_err(&shca->ib_device, "Can't query port properties"); |
| ret = -EINVAL; |
| goto query_sma_attr1; |
| } |
| |
| memset(attr, 0, sizeof(struct ehca_sma_attr)); |
| |
| attr->lid = rblock->lid; |
| attr->lmc = rblock->lmc; |
| attr->sm_sl = rblock->sm_sl; |
| attr->sm_lid = rblock->sm_lid; |
| |
| attr->pkey_tbl_len = rblock->pkey_tbl_len; |
| memcpy(attr->pkeys, rblock->pkey_entries, sizeof(attr->pkeys)); |
| |
| query_sma_attr1: |
| ehca_free_fw_ctrlblock(rblock); |
| |
| return ret; |
| } |
| |
| int ehca_query_pkey(struct ib_device *ibdev, u8 port, u16 index, u16 *pkey) |
| { |
| int ret = 0; |
| u64 h_ret; |
| struct ehca_shca *shca; |
| struct hipz_query_port *rblock; |
| |
| shca = container_of(ibdev, struct ehca_shca, ib_device); |
| if (index > 16) { |
| ehca_err(&shca->ib_device, "Invalid index: %x.", index); |
| return -EINVAL; |
| } |
| |
| rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); |
| if (!rblock) { |
| ehca_err(&shca->ib_device, "Can't allocate rblock memory."); |
| return -ENOMEM; |
| } |
| |
| h_ret = hipz_h_query_port(shca->ipz_hca_handle, port, rblock); |
| if (h_ret != H_SUCCESS) { |
| ehca_err(&shca->ib_device, "Can't query port properties"); |
| ret = -EINVAL; |
| goto query_pkey1; |
| } |
| |
| memcpy(pkey, &rblock->pkey_entries + index, sizeof(u16)); |
| |
| query_pkey1: |
| ehca_free_fw_ctrlblock(rblock); |
| |
| return ret; |
| } |
| |
| int ehca_query_gid(struct ib_device *ibdev, u8 port, |
| int index, union ib_gid *gid) |
| { |
| int ret = 0; |
| u64 h_ret; |
| struct ehca_shca *shca = container_of(ibdev, struct ehca_shca, |
| ib_device); |
| struct hipz_query_port *rblock; |
| |
| if (index > 255) { |
| ehca_err(&shca->ib_device, "Invalid index: %x.", index); |
| return -EINVAL; |
| } |
| |
| rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); |
| if (!rblock) { |
| ehca_err(&shca->ib_device, "Can't allocate rblock memory."); |
| return -ENOMEM; |
| } |
| |
| h_ret = hipz_h_query_port(shca->ipz_hca_handle, port, rblock); |
| if (h_ret != H_SUCCESS) { |
| ehca_err(&shca->ib_device, "Can't query port properties"); |
| ret = -EINVAL; |
| goto query_gid1; |
| } |
| |
| memcpy(&gid->raw[0], &rblock->gid_prefix, sizeof(u64)); |
| memcpy(&gid->raw[8], &rblock->guid_entries[index], sizeof(u64)); |
| |
| query_gid1: |
| ehca_free_fw_ctrlblock(rblock); |
| |
| return ret; |
| } |
| |
| static const u32 allowed_port_caps = ( |
| IB_PORT_SM | IB_PORT_LED_INFO_SUP | IB_PORT_CM_SUP | |
| IB_PORT_SNMP_TUNNEL_SUP | IB_PORT_DEVICE_MGMT_SUP | |
| IB_PORT_VENDOR_CLASS_SUP); |
| |
| int ehca_modify_port(struct ib_device *ibdev, |
| u8 port, int port_modify_mask, |
| struct ib_port_modify *props) |
| { |
| int ret = 0; |
| struct ehca_shca *shca; |
| struct hipz_query_port *rblock; |
| u32 cap; |
| u64 hret; |
| |
| shca = container_of(ibdev, struct ehca_shca, ib_device); |
| if ((props->set_port_cap_mask | props->clr_port_cap_mask) |
| & ~allowed_port_caps) { |
| ehca_err(&shca->ib_device, "Non-changeable bits set in masks " |
| "set=%x clr=%x allowed=%x", props->set_port_cap_mask, |
| props->clr_port_cap_mask, allowed_port_caps); |
| return -EINVAL; |
| } |
| |
| if (mutex_lock_interruptible(&shca->modify_mutex)) |
| return -ERESTARTSYS; |
| |
| rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); |
| if (!rblock) { |
| ehca_err(&shca->ib_device, "Can't allocate rblock memory."); |
| ret = -ENOMEM; |
| goto modify_port1; |
| } |
| |
| hret = hipz_h_query_port(shca->ipz_hca_handle, port, rblock); |
| if (hret != H_SUCCESS) { |
| ehca_err(&shca->ib_device, "Can't query port properties"); |
| ret = -EINVAL; |
| goto modify_port2; |
| } |
| |
| cap = (rblock->capability_mask | props->set_port_cap_mask) |
| & ~props->clr_port_cap_mask; |
| |
| hret = hipz_h_modify_port(shca->ipz_hca_handle, port, |
| cap, props->init_type, port_modify_mask); |
| if (hret != H_SUCCESS) { |
| ehca_err(&shca->ib_device, "Modify port failed h_ret=%li", |
| hret); |
| ret = -EINVAL; |
| } |
| |
| modify_port2: |
| ehca_free_fw_ctrlblock(rblock); |
| |
| modify_port1: |
| mutex_unlock(&shca->modify_mutex); |
| |
| return ret; |
| } |