| # |
| # Input misc drivers configuration |
| # |
| menuconfig INPUT_MISC |
| bool "Miscellaneous devices" |
| help |
| Say Y here, and a list of miscellaneous input drivers will be displayed. |
| Everything that didn't fit into the other categories is here. This option |
| doesn't affect the kernel. |
| |
| If unsure, say Y. |
| |
| if INPUT_MISC |
| |
| config INPUT_88PM860X_ONKEY |
| tristate "88PM860x ONKEY support" |
| depends on MFD_88PM860X |
| help |
| Support the ONKEY of Marvell 88PM860x PMICs as an input device |
| reporting power button status. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called 88pm860x_onkey. |
| |
| config INPUT_AD714X |
| tristate "Analog Devices AD714x Capacitance Touch Sensor" |
| help |
| Say Y here if you want to support an AD7142/3/7/8/7A touch sensor. |
| |
| You should select a bus connection too. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ad714x. |
| |
| config INPUT_AD714X_I2C |
| tristate "support I2C bus connection" |
| depends on INPUT_AD714X && I2C |
| default y |
| help |
| Say Y here if you have AD7142/AD7147 hooked to an I2C bus. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ad714x-i2c. |
| |
| config INPUT_AD714X_SPI |
| tristate "support SPI bus connection" |
| depends on INPUT_AD714X && SPI |
| default y |
| help |
| Say Y here if you have AD7142/AD7147 hooked to a SPI bus. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ad714x-spi. |
| |
| config INPUT_PCSPKR |
| tristate "PC Speaker support" |
| depends on PCSPKR_PLATFORM |
| help |
| Say Y here if you want the standard PC Speaker to be used for |
| bells and whistles. |
| |
| If unsure, say Y. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pcspkr. |
| |
| config INPUT_SPARCSPKR |
| tristate "SPARC Speaker support" |
| depends on PCI && SPARC64 |
| help |
| Say Y here if you want the standard Speaker on Sparc PCI systems |
| to be used for bells and whistles. |
| |
| If unsure, say Y. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sparcspkr. |
| |
| config INPUT_M68K_BEEP |
| tristate "M68k Beeper support" |
| depends on M68K |
| |
| config INPUT_APANEL |
| tristate "Fujitsu Lifebook Application Panel buttons" |
| depends on X86 && I2C && LEDS_CLASS |
| select INPUT_POLLDEV |
| select CHECK_SIGNATURE |
| help |
| Say Y here for support of the Application Panel buttons, used on |
| Fujitsu Lifebook. These are attached to the mainboard through |
| an SMBus interface managed by the I2C Intel ICH (i801) driver, |
| which you should also build for this kernel. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called apanel. |
| |
| config INPUT_IXP4XX_BEEPER |
| tristate "IXP4XX Beeper support" |
| depends on ARCH_IXP4XX |
| help |
| If you say yes here, you can connect a beeper to the |
| ixp4xx gpio pins. This is used by the LinkSys NSLU2. |
| |
| If unsure, say Y. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ixp4xx-beeper. |
| |
| config INPUT_COBALT_BTNS |
| tristate "Cobalt button interface" |
| depends on MIPS_COBALT |
| select INPUT_POLLDEV |
| help |
| Say Y here if you want to support MIPS Cobalt button interface. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called cobalt_btns. |
| |
| config INPUT_WISTRON_BTNS |
| tristate "x86 Wistron laptop button interface" |
| depends on X86 && !X86_64 |
| select INPUT_POLLDEV |
| select INPUT_SPARSEKMAP |
| select NEW_LEDS |
| select LEDS_CLASS |
| select CHECK_SIGNATURE |
| help |
| Say Y here for support of Wistron laptop button interfaces, used on |
| laptops of various brands, including Acer and Fujitsu-Siemens. If |
| available, mail and wifi LEDs will be controllable via /sys/class/leds. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called wistron_btns. |
| |
| config INPUT_ATLAS_BTNS |
| tristate "x86 Atlas button interface" |
| depends on X86 && ACPI |
| help |
| Say Y here for support of Atlas wallmount touchscreen buttons. |
| The events will show up as scancodes F1 through F9 via evdev. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called atlas_btns. |
| |
| config INPUT_ATI_REMOTE |
| tristate "ATI / X10 USB RF remote control" |
| depends on USB_ARCH_HAS_HCD |
| select USB |
| help |
| Say Y here if you want to use an ATI or X10 "Lola" USB remote control. |
| These are RF remotes with USB receivers. |
| The ATI remote comes with many of ATI's All-In-Wonder video cards. |
| The X10 "Lola" remote is available at: |
| <http://www.x10.com/products/lola_sg1.htm> |
| This driver provides mouse pointer, left and right mouse buttons, |
| and maps all the other remote buttons to keypress events. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ati_remote. |
| |
| config INPUT_ATI_REMOTE2 |
| tristate "ATI / Philips USB RF remote control" |
| depends on USB_ARCH_HAS_HCD |
| select USB |
| help |
| Say Y here if you want to use an ATI or Philips USB RF remote control. |
| These are RF remotes with USB receivers. |
| ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards |
| and is also available as a separate product. |
| This driver provides mouse pointer, left and right mouse buttons, |
| and maps all the other remote buttons to keypress events. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ati_remote2. |
| |
| config INPUT_KEYSPAN_REMOTE |
| tristate "Keyspan DMR USB remote control (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| depends on USB_ARCH_HAS_HCD |
| select USB |
| help |
| Say Y here if you want to use a Keyspan DMR USB remote control. |
| Currently only the UIA-11 type of receiver has been tested. The tag |
| on the receiver that connects to the USB port should have a P/N that |
| will tell you what type of DMR you have. The UIA-10 type is not |
| supported at this time. This driver maps all buttons to keypress |
| events. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called keyspan_remote. |
| |
| config INPUT_POWERMATE |
| tristate "Griffin PowerMate and Contour Jog support" |
| depends on USB_ARCH_HAS_HCD |
| select USB |
| help |
| Say Y here if you want to use Griffin PowerMate or Contour Jog devices. |
| These are aluminum dials which can measure clockwise and anticlockwise |
| rotation. The dial also acts as a pushbutton. The base contains an LED |
| which can be instructed to pulse or to switch to a particular intensity. |
| |
| You can download userspace tools from |
| <http://sowerbutts.com/powermate/>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called powermate. |
| |
| config INPUT_YEALINK |
| tristate "Yealink usb-p1k voip phone" |
| depends on EXPERIMENTAL |
| depends on USB_ARCH_HAS_HCD |
| select USB |
| help |
| Say Y here if you want to enable keyboard and LCD functions of the |
| Yealink usb-p1k usb phones. The audio part is enabled by the generic |
| usb sound driver, so you might want to enable that as well. |
| |
| For information about how to use these additional functions, see |
| <file:Documentation/input/yealink.txt>. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called yealink. |
| |
| config INPUT_CM109 |
| tristate "C-Media CM109 USB I/O Controller" |
| depends on EXPERIMENTAL |
| depends on USB_ARCH_HAS_HCD |
| select USB |
| help |
| Say Y here if you want to enable keyboard and buzzer functions of the |
| C-Media CM109 usb phones. The audio part is enabled by the generic |
| usb sound driver, so you might want to enable that as well. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called cm109. |
| |
| config INPUT_TWL4030_PWRBUTTON |
| tristate "TWL4030 Power button Driver" |
| depends on TWL4030_CORE |
| help |
| Say Y here if you want to enable power key reporting via the |
| TWL4030 family of chips. |
| |
| To compile this driver as a module, choose M here. The module will |
| be called twl4030_pwrbutton. |
| |
| config INPUT_TWL4030_VIBRA |
| tristate "Support for TWL4030 Vibrator" |
| depends on TWL4030_CORE |
| select TWL4030_CODEC |
| select INPUT_FF_MEMLESS |
| help |
| This option enables support for TWL4030 Vibrator Driver. |
| |
| To compile this driver as a module, choose M here. The module will |
| be called twl4030_vibra. |
| |
| config INPUT_UINPUT |
| tristate "User level driver support" |
| help |
| Say Y here if you want to support user level drivers for input |
| subsystem accessible under char device 10:223 - /dev/input/uinput. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called uinput. |
| |
| config INPUT_SGI_BTNS |
| tristate "SGI Indy/O2 volume button interface" |
| depends on SGI_IP22 || SGI_IP32 |
| select INPUT_POLLDEV |
| help |
| Say Y here if you want to support SGI Indy/O2 volume button interface. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sgi_btns. |
| |
| config INPUT_WINBOND_CIR |
| tristate "Winbond IR remote control" |
| depends on X86 && PNP |
| select NEW_LEDS |
| select LEDS_CLASS |
| select LEDS_TRIGGERS |
| select BITREVERSE |
| help |
| Say Y here if you want to use the IR remote functionality found |
| in some Winbond SuperI/O chips. Currently only the WPCD376I |
| chip is supported (included in some Intel Media series motherboards). |
| |
| IR Receive and wake-on-IR from suspend and power-off is currently |
| supported. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called winbond_cir. |
| |
| config HP_SDC_RTC |
| tristate "HP SDC Real Time Clock" |
| depends on (GSC || HP300) && SERIO |
| select HP_SDC |
| help |
| Say Y here if you want to support the built-in real time clock |
| of the HP SDC controller. |
| |
| config INPUT_PCF50633_PMU |
| tristate "PCF50633 PMU events" |
| depends on MFD_PCF50633 |
| help |
| Say Y to include support for delivering PMU events via input |
| layer on NXP PCF50633. |
| |
| config INPUT_PCF8574 |
| tristate "PCF8574 Keypad input device" |
| depends on I2C && EXPERIMENTAL |
| help |
| Say Y here if you want to support a keypad connetced via I2C |
| with a PCF8574. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pcf8574_keypad. |
| |
| config INPUT_GPIO_ROTARY_ENCODER |
| tristate "Rotary encoders connected to GPIO pins" |
| depends on GPIOLIB && GENERIC_GPIO |
| help |
| Say Y here to add support for rotary encoders connected to GPIO lines. |
| Check file:Documentation/input/rotary-encoder.txt for more |
| information. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called rotary_encoder. |
| |
| config INPUT_RB532_BUTTON |
| tristate "Mikrotik Routerboard 532 button interface" |
| depends on MIKROTIK_RB532 |
| depends on GPIOLIB && GENERIC_GPIO |
| select INPUT_POLLDEV |
| help |
| Say Y here if you want support for the S1 button built into |
| Mikrotik's Routerboard 532. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called rb532_button. |
| |
| config INPUT_DM355EVM |
| tristate "TI DaVinci DM355 EVM Keypad and IR Remote" |
| depends on MFD_DM355EVM_MSP |
| select INPUT_SPARSEKMAP |
| help |
| Supports the pushbuttons and IR remote used with |
| the DM355 EVM board. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called dm355evm_keys. |
| |
| config INPUT_BFIN_ROTARY |
| tristate "Blackfin Rotary support" |
| depends on BF54x || BF52x |
| help |
| Say Y here if you want to use the Blackfin Rotary. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bfin-rotary. |
| |
| config INPUT_WM831X_ON |
| tristate "WM831X ON pin" |
| depends on MFD_WM831X |
| help |
| Support the ON pin of WM831X PMICs as an input device |
| reporting power button status. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called wm831x_on. |
| |
| config INPUT_PCAP |
| tristate "Motorola EZX PCAP misc input events" |
| depends on EZX_PCAP |
| help |
| Say Y here if you want to use Power key and Headphone button |
| on Motorola EZX phones. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pcap_keys. |
| |
| endif |