| /* |
| * linux/arch/ia64/kernel/irq.c |
| * |
| * Copyright (C) 1998-2001 Hewlett-Packard Co |
| * Stephane Eranian <eranian@hpl.hp.com> |
| * David Mosberger-Tang <davidm@hpl.hp.com> |
| * |
| * 6/10/99: Updated to bring in sync with x86 version to facilitate |
| * support for SMP and different interrupt controllers. |
| * |
| * 09/15/00 Goutham Rao <goutham.rao@intel.com> Implemented pci_irq_to_vector |
| * PCI to vector allocation routine. |
| * 04/14/2004 Ashok Raj <ashok.raj@intel.com> |
| * Added CPU Hotplug handling for IPF. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| |
| #include <linux/jiffies.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/slab.h> |
| #include <linux/ptrace.h> |
| #include <linux/random.h> /* for rand_initialize_irq() */ |
| #include <linux/signal.h> |
| #include <linux/smp.h> |
| #include <linux/smp_lock.h> |
| #include <linux/threads.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/delay.h> |
| #include <asm/intrinsics.h> |
| #include <asm/io.h> |
| #include <asm/hw_irq.h> |
| #include <asm/machvec.h> |
| #include <asm/pgtable.h> |
| #include <asm/system.h> |
| |
| #ifdef CONFIG_PERFMON |
| # include <asm/perfmon.h> |
| #endif |
| |
| #define IRQ_DEBUG 0 |
| |
| /* These can be overridden in platform_irq_init */ |
| int ia64_first_device_vector = IA64_DEF_FIRST_DEVICE_VECTOR; |
| int ia64_last_device_vector = IA64_DEF_LAST_DEVICE_VECTOR; |
| |
| /* default base addr of IPI table */ |
| void __iomem *ipi_base_addr = ((void __iomem *) |
| (__IA64_UNCACHED_OFFSET | IA64_IPI_DEFAULT_BASE_ADDR)); |
| |
| /* |
| * Legacy IRQ to IA-64 vector translation table. |
| */ |
| __u8 isa_irq_to_vector_map[16] = { |
| /* 8259 IRQ translation, first 16 entries */ |
| 0x2f, 0x20, 0x2e, 0x2d, 0x2c, 0x2b, 0x2a, 0x29, |
| 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21 |
| }; |
| EXPORT_SYMBOL(isa_irq_to_vector_map); |
| |
| static unsigned long ia64_vector_mask[BITS_TO_LONGS(IA64_MAX_DEVICE_VECTORS)]; |
| |
| int |
| assign_irq_vector (int irq) |
| { |
| int pos, vector; |
| again: |
| pos = find_first_zero_bit(ia64_vector_mask, IA64_NUM_DEVICE_VECTORS); |
| vector = IA64_FIRST_DEVICE_VECTOR + pos; |
| if (vector > IA64_LAST_DEVICE_VECTOR) |
| return -ENOSPC; |
| if (test_and_set_bit(pos, ia64_vector_mask)) |
| goto again; |
| return vector; |
| } |
| |
| void |
| free_irq_vector (int vector) |
| { |
| int pos; |
| |
| if (vector < IA64_FIRST_DEVICE_VECTOR || vector > IA64_LAST_DEVICE_VECTOR) |
| return; |
| |
| pos = vector - IA64_FIRST_DEVICE_VECTOR; |
| if (!test_and_clear_bit(pos, ia64_vector_mask)) |
| printk(KERN_WARNING "%s: double free!\n", __FUNCTION__); |
| } |
| |
| int |
| reserve_irq_vector (int vector) |
| { |
| int pos; |
| |
| if (vector < IA64_FIRST_DEVICE_VECTOR || |
| vector > IA64_LAST_DEVICE_VECTOR) |
| return -EINVAL; |
| |
| pos = vector - IA64_FIRST_DEVICE_VECTOR; |
| return test_and_set_bit(pos, ia64_vector_mask); |
| } |
| |
| #ifdef CONFIG_SMP |
| # define IS_RESCHEDULE(vec) (vec == IA64_IPI_RESCHEDULE) |
| #else |
| # define IS_RESCHEDULE(vec) (0) |
| #endif |
| /* |
| * That's where the IVT branches when we get an external |
| * interrupt. This branches to the correct hardware IRQ handler via |
| * function ptr. |
| */ |
| void |
| ia64_handle_irq (ia64_vector vector, struct pt_regs *regs) |
| { |
| unsigned long saved_tpr; |
| |
| #if IRQ_DEBUG |
| { |
| unsigned long bsp, sp; |
| |
| /* |
| * Note: if the interrupt happened while executing in |
| * the context switch routine (ia64_switch_to), we may |
| * get a spurious stack overflow here. This is |
| * because the register and the memory stack are not |
| * switched atomically. |
| */ |
| bsp = ia64_getreg(_IA64_REG_AR_BSP); |
| sp = ia64_getreg(_IA64_REG_SP); |
| |
| if ((sp - bsp) < 1024) { |
| static unsigned char count; |
| static long last_time; |
| |
| if (jiffies - last_time > 5*HZ) |
| count = 0; |
| if (++count < 5) { |
| last_time = jiffies; |
| printk("ia64_handle_irq: DANGER: less than " |
| "1KB of free stack space!!\n" |
| "(bsp=0x%lx, sp=%lx)\n", bsp, sp); |
| } |
| } |
| } |
| #endif /* IRQ_DEBUG */ |
| |
| /* |
| * Always set TPR to limit maximum interrupt nesting depth to |
| * 16 (without this, it would be ~240, which could easily lead |
| * to kernel stack overflows). |
| */ |
| irq_enter(); |
| saved_tpr = ia64_getreg(_IA64_REG_CR_TPR); |
| ia64_srlz_d(); |
| while (vector != IA64_SPURIOUS_INT_VECTOR) { |
| if (!IS_RESCHEDULE(vector)) { |
| ia64_setreg(_IA64_REG_CR_TPR, vector); |
| ia64_srlz_d(); |
| |
| __do_IRQ(local_vector_to_irq(vector), regs); |
| |
| /* |
| * Disable interrupts and send EOI: |
| */ |
| local_irq_disable(); |
| ia64_setreg(_IA64_REG_CR_TPR, saved_tpr); |
| } |
| ia64_eoi(); |
| vector = ia64_get_ivr(); |
| } |
| /* |
| * This must be done *after* the ia64_eoi(). For example, the keyboard softirq |
| * handler needs to be able to wait for further keyboard interrupts, which can't |
| * come through until ia64_eoi() has been done. |
| */ |
| irq_exit(); |
| } |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| /* |
| * This function emulates a interrupt processing when a cpu is about to be |
| * brought down. |
| */ |
| void ia64_process_pending_intr(void) |
| { |
| ia64_vector vector; |
| unsigned long saved_tpr; |
| extern unsigned int vectors_in_migration[NR_IRQS]; |
| |
| vector = ia64_get_ivr(); |
| |
| irq_enter(); |
| saved_tpr = ia64_getreg(_IA64_REG_CR_TPR); |
| ia64_srlz_d(); |
| |
| /* |
| * Perform normal interrupt style processing |
| */ |
| while (vector != IA64_SPURIOUS_INT_VECTOR) { |
| if (!IS_RESCHEDULE(vector)) { |
| ia64_setreg(_IA64_REG_CR_TPR, vector); |
| ia64_srlz_d(); |
| |
| /* |
| * Now try calling normal ia64_handle_irq as it would have got called |
| * from a real intr handler. Try passing null for pt_regs, hopefully |
| * it will work. I hope it works!. |
| * Probably could shared code. |
| */ |
| vectors_in_migration[local_vector_to_irq(vector)]=0; |
| __do_IRQ(local_vector_to_irq(vector), NULL); |
| |
| /* |
| * Disable interrupts and send EOI |
| */ |
| local_irq_disable(); |
| ia64_setreg(_IA64_REG_CR_TPR, saved_tpr); |
| } |
| ia64_eoi(); |
| vector = ia64_get_ivr(); |
| } |
| irq_exit(); |
| } |
| #endif |
| |
| |
| #ifdef CONFIG_SMP |
| extern irqreturn_t handle_IPI (int irq, void *dev_id, struct pt_regs *regs); |
| |
| static struct irqaction ipi_irqaction = { |
| .handler = handle_IPI, |
| .flags = SA_INTERRUPT, |
| .name = "IPI" |
| }; |
| #endif |
| |
| void |
| register_percpu_irq (ia64_vector vec, struct irqaction *action) |
| { |
| irq_desc_t *desc; |
| unsigned int irq; |
| |
| for (irq = 0; irq < NR_IRQS; ++irq) |
| if (irq_to_vector(irq) == vec) { |
| desc = irq_descp(irq); |
| desc->status |= IRQ_PER_CPU; |
| desc->handler = &irq_type_ia64_lsapic; |
| if (action) |
| setup_irq(irq, action); |
| } |
| } |
| |
| void __init |
| init_IRQ (void) |
| { |
| register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL); |
| #ifdef CONFIG_SMP |
| register_percpu_irq(IA64_IPI_VECTOR, &ipi_irqaction); |
| #endif |
| #ifdef CONFIG_PERFMON |
| pfm_init_percpu(); |
| #endif |
| platform_irq_init(); |
| } |
| |
| void |
| ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect) |
| { |
| void __iomem *ipi_addr; |
| unsigned long ipi_data; |
| unsigned long phys_cpu_id; |
| |
| #ifdef CONFIG_SMP |
| phys_cpu_id = cpu_physical_id(cpu); |
| #else |
| phys_cpu_id = (ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff; |
| #endif |
| |
| /* |
| * cpu number is in 8bit ID and 8bit EID |
| */ |
| |
| ipi_data = (delivery_mode << 8) | (vector & 0xff); |
| ipi_addr = ipi_base_addr + ((phys_cpu_id << 4) | ((redirect & 1) << 3)); |
| |
| writeq(ipi_data, ipi_addr); |
| } |