arch/powerpc/boot/dts/mpc8568mds.dts - LeafOS-Devices/android_kernel_realme_mt6785 - Gitiles

 /*
  * MPC8568E MDS Device Tree Source
  *
  * Copyright 2007 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */


 /*
 /memreserve/	00000000 1000000;
 */

 / {
 	model = "MPC8568EMDS";
 	compatible = "MPC8568EMDS", "MPC85xxMDS";
 	#address-cells = <1>;
 	#size-cells = <1>;

 	cpus {
 		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;

 		PowerPC,8568@0 {
 			device_type = "cpu";
 			reg = <0>;
 			d-cache-line-size = <20>;	// 32 bytes
 			i-cache-line-size = <20>;	// 32 bytes
 			d-cache-size = <8000>;		// L1, 32K
 			i-cache-size = <8000>;		// L1, 32K
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
 			32-bit;
 		};
 	};

 	memory {
 		device_type = "memory";
 		reg = <00000000 10000000>;
 	};

 	bcsr@f8000000 {
 		device_type = "board-control";
 		reg = <f8000000 8000>;
 	};

 	soc8568@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		#interrupt-cells = <2>;
 		device_type = "soc";
 		ranges = <0 e0000000 00100000>;
 		reg = <e0000000 00100000>;
 		bus-frequency = <0>;

 		i2c@3000 {
 			device_type = "i2c";
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <1b 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};

 		i2c@3100 {
 			device_type = "i2c";
 			compatible = "fsl-i2c";
 			reg = <3100 100>;
 			interrupts = <1b 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};

 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			device_type = "mdio";
 			compatible = "gianfar";
 			reg = <24520 20>;
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <31 1>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <32 1>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};
 			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
 				interrupts = <31 1>;
 				reg = <2>;
 				device_type = "ethernet-phy";
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <32 1>;
 				reg = <3>;
 				device_type = "ethernet-phy";
 			};
 		};

 		ethernet@24000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
 			reg = <24000 1000>;
 			mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <d 2 e 2 12 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy2>;
 		};

 		ethernet@25000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
 			reg = <25000 1000>;
 			mac-address = [ 00 00 00 00 00 00];
 			interrupts = <13 2 14 2 18 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy3>;
 		};

 		serial@4500 {
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <4500 100>;
 			clock-frequency = <0>;
 			interrupts = <1a 2>;
 			interrupt-parent = <&mpic>;
 		};

 		serial@4600 {
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <4600 100>;
 			clock-frequency = <0>;
 			interrupts = <1a 2>;
 			interrupt-parent = <&mpic>;
 		};

 		crypto@30000 {
 			device_type = "crypto";
 			model = "SEC2";
 			compatible = "talitos";
 			reg = <30000 f000>;
 			interrupts = <1d 2>;
 			interrupt-parent = <&mpic>;
 			num-channels = <4>;
 			channel-fifo-len = <18>;
 			exec-units-mask = <000000fe>;
 			descriptor-types-mask = <012b0ebf>;
 		};

 		mpic: pic@40000 {
 			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <40000 40000>;
 			built-in;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
                         big-endian;
 		};
 		par_io@e0100 {
 			reg = <e0100 100>;
 			device_type = "par_io";
 			num-ports = <7>;

 			pio1: ucc_pin@01 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					4  0a  1  0  2  0 	/* TxD0 */
 					4  09  1  0  2  0 	/* TxD1 */
 					4  08  1  0  2  0 	/* TxD2 */
 					4  07  1  0  2  0 	/* TxD3 */
 					4  17  1  0  2  0 	/* TxD4 */
 					4  16  1  0  2  0 	/* TxD5 */
 					4  15  1  0  2  0 	/* TxD6 */
 					4  14  1  0  2  0 	/* TxD7 */
 					4  0f  2  0  2  0 	/* RxD0 */
 					4  0e  2  0  2  0 	/* RxD1 */
 					4  0d  2  0  2  0 	/* RxD2 */
 					4  0c  2  0  2  0 	/* RxD3 */
 					4  1d  2  0  2  0 	/* RxD4 */
 					4  1c  2  0  2  0 	/* RxD5 */
 					4  1b  2  0  2  0 	/* RxD6 */
 					4  1a  2  0  2  0 	/* RxD7 */
 					4  0b  1  0  2  0 	/* TX_EN */
 					4  18  1  0  2  0 	/* TX_ER */
 					4  0f  2  0  2  0 	/* RX_DV */
 					4  1e  2  0  2  0 	/* RX_ER */
 					4  11  2  0  2  0 	/* RX_CLK */
 					4  13  1  0  2  0 	/* GTX_CLK */
 					1  1f  2  0  3  0>;	/* GTX125 */
 			};
 			pio2: ucc_pin@02 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					5  0a 1  0  2  0   /* TxD0 */
 					5  09 1  0  2  0   /* TxD1 */
 					5  08 1  0  2  0   /* TxD2 */
 					5  07 1  0  2  0   /* TxD3 */
 					5  17 1  0  2  0   /* TxD4 */
 					5  16 1  0  2  0   /* TxD5 */
 					5  15 1  0  2  0   /* TxD6 */
 					5  14 1  0  2  0   /* TxD7 */
 					5  0f 2  0  2  0   /* RxD0 */
 					5  0e 2  0  2  0   /* RxD1 */
 					5  0d 2  0  2  0   /* RxD2 */
 					5  0c 2  0  2  0   /* RxD3 */
 					5  1d 2  0  2  0   /* RxD4 */
 					5  1c 2  0  2  0   /* RxD5 */
 					5  1b 2  0  2  0   /* RxD6 */
 					5  1a 2  0  2  0   /* RxD7 */
 					5  0b 1  0  2  0   /* TX_EN */
 					5  18 1  0  2  0   /* TX_ER */
 					5  10 2  0  2  0   /* RX_DV */
 					5  1e 2  0  2  0   /* RX_ER */
 					5  11 2  0  2  0   /* RX_CLK */
 					5  13 1  0  2  0   /* GTX_CLK */
 					1  1f 2  0  3  0   /* GTX125 */
 					4  06 3  0  2  0   /* MDIO */
 					4  05 1  0  2  0>; /* MDC */
 			};
 		};
 	};

 	qe@e0080000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "qe";
 		model = "QE";
 		ranges = <0 e0080000 00040000>;
 		reg = <e0080000 480>;
 		brg-frequency = <0>;
 		bus-frequency = <179A7B00>;

 		muram@10000 {
 			device_type = "muram";
 			ranges = <0 00010000 0000c000>;

 			data-only@0{
 				reg = <0 c000>;
 			};
 		};

 		spi@4c0 {
 			device_type = "spi";
 			compatible = "fsl_spi";
 			reg = <4c0 40>;
 			interrupts = <2>;
 			interrupt-parent = <&qeic>;
 			mode = "cpu";
 		};

 		spi@500 {
 			device_type = "spi";
 			compatible = "fsl_spi";
 			reg = <500 40>;
 			interrupts = <1>;
 			interrupt-parent = <&qeic>;
 			mode = "cpu";
 		};

 		ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";
 			model = "UCC";
 			device-id = <1>;
 			reg = <2000 200>;
 			interrupts = <20>;
 			interrupt-parent = <&qeic>;
 			mac-address = [ 00 04 9f 00 23 23 ];
 			rx-clock = <0>;
 			tx-clock = <19>;
 			phy-handle = <&qe_phy0>;
 			pio-handle = <&pio1>;
 		};

 		ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
 			model = "UCC";
 			device-id = <2>;
 			reg = <3000 200>;
 			interrupts = <21>;
 			interrupt-parent = <&qeic>;
 			mac-address = [ 00 11 22 33 44 55 ];
 			rx-clock = <0>;
 			tx-clock = <14>;
 			phy-handle = <&qe_phy1>;
 			pio-handle = <&pio2>;
 		};

 		mdio@2120 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2120 18>;
 			device_type = "mdio";
 			compatible = "ucc_geth_phy";

 			/* These are the same PHYs as on
 			 * gianfar's MDIO bus */
 			qe_phy0: ethernet-phy@00 {
 				interrupt-parent = <&mpic>;
 				interrupts = <31 1>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 				interface = <6>; //ENET_1000_GMII
 			};
 			qe_phy1: ethernet-phy@01 {
 				interrupt-parent = <&mpic>;
 				interrupts = <32 1>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 				interface = <6>;
 			};
 			qe_phy2: ethernet-phy@02 {
 				interrupt-parent = <&mpic>;
 				interrupts = <31 1>;
 				reg = <2>;
 				device_type = "ethernet-phy";
 				interface = <6>; //ENET_1000_GMII
 			};
 			qe_phy3: ethernet-phy@03 {
 				interrupt-parent = <&mpic>;
 				interrupts = <32 1>;
 				reg = <3>;
 				device_type = "ethernet-phy";
 				interface = <6>; //ENET_1000_GMII
 			};
 		};

 		qeic: qeic@80 {
 			interrupt-controller;
 			device_type = "qeic";
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
 			reg = <80 80>;
 			built-in;
 			big-endian;
 			interrupts = <1e 2 1e 2>; //high:30 low:30
 			interrupt-parent = <&mpic>;
 		};

 	};
 };
	/*
	* MPC8568E MDS Device Tree Source
	*
	* Copyright 2007 Freescale Semiconductor Inc.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*/


	/*
	/memreserve/ 00000000 1000000;
	*/

	/ {
	model = "MPC8568EMDS";
	compatible = "MPC8568EMDS", "MPC85xxMDS";
	#address-cells = <1>;
	#size-cells = <1>;

	cpus {
	#cpus = <1>;
	#address-cells = <1>;
	#size-cells = <0>;

	PowerPC,8568@0 {
	device_type = "cpu";
	reg = <0>;
	d-cache-line-size = <20>; // 32 bytes
	i-cache-line-size = <20>; // 32 bytes
	d-cache-size = <8000>; // L1, 32K
	i-cache-size = <8000>; // L1, 32K
	timebase-frequency = <0>;
	bus-frequency = <0>;
	clock-frequency = <0>;
	32-bit;
	};
	};

	memory {
	device_type = "memory";
	reg = <00000000 10000000>;
	};

	bcsr@f8000000 {
	device_type = "board-control";
	reg = <f8000000 8000>;
	};

	soc8568@e0000000 {
	#address-cells = <1>;
	#size-cells = <1>;
	#interrupt-cells = <2>;
	device_type = "soc";
	ranges = <0 e0000000 00100000>;
	reg = <e0000000 00100000>;
	bus-frequency = <0>;

	i2c@3000 {
	device_type = "i2c";
	compatible = "fsl-i2c";
	reg = <3000 100>;
	interrupts = <1b 2>;
	interrupt-parent = <&mpic>;
	dfsrr;
	};

	i2c@3100 {
	device_type = "i2c";
	compatible = "fsl-i2c";
	reg = <3100 100>;
	interrupts = <1b 2>;
	interrupt-parent = <&mpic>;
	dfsrr;
	};

	mdio@24520 {
	#address-cells = <1>;
	#size-cells = <0>;
	device_type = "mdio";
	compatible = "gianfar";
	reg = <24520 20>;
	phy0: ethernet-phy@0 {
	interrupt-parent = <&mpic>;
	interrupts = <31 1>;
	reg = <0>;
	device_type = "ethernet-phy";
	};
	phy1: ethernet-phy@1 {
	interrupt-parent = <&mpic>;
	interrupts = <32 1>;
	reg = <1>;
	device_type = "ethernet-phy";
	};
	phy2: ethernet-phy@2 {
	interrupt-parent = <&mpic>;
	interrupts = <31 1>;
	reg = <2>;
	device_type = "ethernet-phy";
	};
	phy3: ethernet-phy@3 {
	interrupt-parent = <&mpic>;
	interrupts = <32 1>;
	reg = <3>;
	device_type = "ethernet-phy";
	};
	};

	ethernet@24000 {
	#address-cells = <1>;
	#size-cells = <0>;
	device_type = "network";
	model = "eTSEC";
	compatible = "gianfar";
	reg = <24000 1000>;
	mac-address = [ 00 00 00 00 00 00 ];
	interrupts = <d 2 e 2 12 2>;
	interrupt-parent = <&mpic>;
	phy-handle = <&phy2>;
	};

	ethernet@25000 {
	#address-cells = <1>;
	#size-cells = <0>;
	device_type = "network";
	model = "eTSEC";
	compatible = "gianfar";
	reg = <25000 1000>;
	mac-address = [ 00 00 00 00 00 00];
	interrupts = <13 2 14 2 18 2>;
	interrupt-parent = <&mpic>;
	phy-handle = <&phy3>;
	};

	serial@4500 {
	device_type = "serial";
	compatible = "ns16550";
	reg = <4500 100>;
	clock-frequency = <0>;
	interrupts = <1a 2>;
	interrupt-parent = <&mpic>;
	};

	serial@4600 {
	device_type = "serial";
	compatible = "ns16550";
	reg = <4600 100>;
	clock-frequency = <0>;
	interrupts = <1a 2>;
	interrupt-parent = <&mpic>;
	};

	crypto@30000 {
	device_type = "crypto";
	model = "SEC2";
	compatible = "talitos";
	reg = <30000 f000>;
	interrupts = <1d 2>;
	interrupt-parent = <&mpic>;
	num-channels = <4>;
	channel-fifo-len = <18>;
	exec-units-mask = <000000fe>;
	descriptor-types-mask = <012b0ebf>;
	};

	mpic: pic@40000 {
	clock-frequency = <0>;
	interrupt-controller;
	#address-cells = <0>;
	#interrupt-cells = <2>;
	reg = <40000 40000>;
	built-in;
	compatible = "chrp,open-pic";
	device_type = "open-pic";
	big-endian;
	};
	par_io@e0100 {
	reg = <e0100 100>;
	device_type = "par_io";
	num-ports = <7>;

	pio1: ucc_pin@01 {
	pio-map = <
	/* port pin dir open_drain assignment has_irq */
	4 0a 1 0 2 0 /* TxD0 */
	4 09 1 0 2 0 /* TxD1 */
	4 08 1 0 2 0 /* TxD2 */
	4 07 1 0 2 0 /* TxD3 */
	4 17 1 0 2 0 /* TxD4 */
	4 16 1 0 2 0 /* TxD5 */
	4 15 1 0 2 0 /* TxD6 */
	4 14 1 0 2 0 /* TxD7 */
	4 0f 2 0 2 0 /* RxD0 */
	4 0e 2 0 2 0 /* RxD1 */
	4 0d 2 0 2 0 /* RxD2 */
	4 0c 2 0 2 0 /* RxD3 */
	4 1d 2 0 2 0 /* RxD4 */
	4 1c 2 0 2 0 /* RxD5 */
	4 1b 2 0 2 0 /* RxD6 */
	4 1a 2 0 2 0 /* RxD7 */
	4 0b 1 0 2 0 /* TX_EN */
	4 18 1 0 2 0 /* TX_ER */
	4 0f 2 0 2 0 /* RX_DV */
	4 1e 2 0 2 0 /* RX_ER */
	4 11 2 0 2 0 /* RX_CLK */
	4 13 1 0 2 0 /* GTX_CLK */
	1 1f 2 0 3 0>; /* GTX125 */
	};
	pio2: ucc_pin@02 {
	pio-map = <
	/* port pin dir open_drain assignment has_irq */
	5 0a 1 0 2 0 /* TxD0 */
	5 09 1 0 2 0 /* TxD1 */
	5 08 1 0 2 0 /* TxD2 */
	5 07 1 0 2 0 /* TxD3 */
	5 17 1 0 2 0 /* TxD4 */
	5 16 1 0 2 0 /* TxD5 */
	5 15 1 0 2 0 /* TxD6 */
	5 14 1 0 2 0 /* TxD7 */
	5 0f 2 0 2 0 /* RxD0 */
	5 0e 2 0 2 0 /* RxD1 */
	5 0d 2 0 2 0 /* RxD2 */
	5 0c 2 0 2 0 /* RxD3 */
	5 1d 2 0 2 0 /* RxD4 */
	5 1c 2 0 2 0 /* RxD5 */
	5 1b 2 0 2 0 /* RxD6 */
	5 1a 2 0 2 0 /* RxD7 */
	5 0b 1 0 2 0 /* TX_EN */
	5 18 1 0 2 0 /* TX_ER */
	5 10 2 0 2 0 /* RX_DV */
	5 1e 2 0 2 0 /* RX_ER */
	5 11 2 0 2 0 /* RX_CLK */
	5 13 1 0 2 0 /* GTX_CLK */
	1 1f 2 0 3 0 /* GTX125 */
	4 06 3 0 2 0 /* MDIO */
	4 05 1 0 2 0>; /* MDC */
	};
	};
	};

	qe@e0080000 {
	#address-cells = <1>;
	#size-cells = <1>;
	device_type = "qe";
	model = "QE";
	ranges = <0 e0080000 00040000>;
	reg = <e0080000 480>;
	brg-frequency = <0>;
	bus-frequency = <179A7B00>;

	muram@10000 {
	device_type = "muram";
	ranges = <0 00010000 0000c000>;

	data-only@0{
	reg = <0 c000>;
	};
	};

	spi@4c0 {
	device_type = "spi";
	compatible = "fsl_spi";
	reg = <4c0 40>;
	interrupts = <2>;
	interrupt-parent = <&qeic>;
	mode = "cpu";
	};

	spi@500 {
	device_type = "spi";
	compatible = "fsl_spi";
	reg = <500 40>;
	interrupts = <1>;
	interrupt-parent = <&qeic>;
	mode = "cpu";
	};

	ucc@2000 {
	device_type = "network";
	compatible = "ucc_geth";
	model = "UCC";
	device-id = <1>;
	reg = <2000 200>;
	interrupts = <20>;
	interrupt-parent = <&qeic>;
	mac-address = [ 00 04 9f 00 23 23 ];
	rx-clock = <0>;
	tx-clock = <19>;
	phy-handle = <&qe_phy0>;
	pio-handle = <&pio1>;
	};

	ucc@3000 {
	device_type = "network";
	compatible = "ucc_geth";
	model = "UCC";
	device-id = <2>;
	reg = <3000 200>;
	interrupts = <21>;
	interrupt-parent = <&qeic>;
	mac-address = [ 00 11 22 33 44 55 ];
	rx-clock = <0>;
	tx-clock = <14>;
	phy-handle = <&qe_phy1>;
	pio-handle = <&pio2>;
	};

	mdio@2120 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <2120 18>;
	device_type = "mdio";
	compatible = "ucc_geth_phy";

	/* These are the same PHYs as on
	* gianfar's MDIO bus */
	qe_phy0: ethernet-phy@00 {
	interrupt-parent = <&mpic>;
	interrupts = <31 1>;
	reg = <0>;
	device_type = "ethernet-phy";
	interface = <6>; //ENET_1000_GMII
	};
	qe_phy1: ethernet-phy@01 {
	interrupt-parent = <&mpic>;
	interrupts = <32 1>;
	reg = <1>;
	device_type = "ethernet-phy";
	interface = <6>;
	};
	qe_phy2: ethernet-phy@02 {
	interrupt-parent = <&mpic>;
	interrupts = <31 1>;
	reg = <2>;
	device_type = "ethernet-phy";
	interface = <6>; //ENET_1000_GMII
	};
	qe_phy3: ethernet-phy@03 {
	interrupt-parent = <&mpic>;
	interrupts = <32 1>;
	reg = <3>;
	device_type = "ethernet-phy";
	interface = <6>; //ENET_1000_GMII
	};
	};

	qeic: qeic@80 {
	interrupt-controller;
	device_type = "qeic";
	#address-cells = <0>;
	#interrupt-cells = <1>;
	reg = <80 80>;
	built-in;
	big-endian;
	interrupts = <1e 2 1e 2>; //high:30 low:30
	interrupt-parent = <&mpic>;
	};

	};
	};