arch/powerpc/platforms/chrp/pci.c - LeafOS-Devices/android_kernel_realme_mt6785 - Gitiles

 /*
  * CHRP pci routines.
  */

 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/string.h>
 #include <linux/init.h>

 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/hydra.h>
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/sections.h>
 #include <asm/pci-bridge.h>
 #include <asm/grackle.h>
 #include <asm/rtas.h>

 #include "chrp.h"
 #include "gg2.h"

 /* LongTrail */
 void __iomem *gg2_pci_config_base;

 /*
  * The VLSI Golden Gate II has only 512K of PCI configuration space, so we
  * limit the bus number to 3 bits
  */

 int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
 			   int len, u32 *val)
 {
 	volatile void __iomem *cfg_data;
 	struct pci_controller *hose = bus->sysdata;

 	if (bus->number > 7)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	/*
 	 * Note: the caller has already checked that off is
 	 * suitably aligned and that len is 1, 2 or 4.
 	 */
 	cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
 	switch (len) {
 	case 1:
 		*val =  in_8(cfg_data);
 		break;
 	case 2:
 		*val = in_le16(cfg_data);
 		break;
 	default:
 		*val = in_le32(cfg_data);
 		break;
 	}
 	return PCIBIOS_SUCCESSFUL;
 }

 int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
 			    int len, u32 val)
 {
 	volatile void __iomem *cfg_data;
 	struct pci_controller *hose = bus->sysdata;

 	if (bus->number > 7)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	/*
 	 * Note: the caller has already checked that off is
 	 * suitably aligned and that len is 1, 2 or 4.
 	 */
 	cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
 	switch (len) {
 	case 1:
 		out_8(cfg_data, val);
 		break;
 	case 2:
 		out_le16(cfg_data, val);
 		break;
 	default:
 		out_le32(cfg_data, val);
 		break;
 	}
 	return PCIBIOS_SUCCESSFUL;
 }

 static struct pci_ops gg2_pci_ops =
 {
 	.read = gg2_read_config,
 	.write = gg2_write_config,
 };

 /*
  * Access functions for PCI config space using RTAS calls.
  */
 int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		     int len, u32 *val)
 {
 	struct pci_controller *hose = bus->sysdata;
 	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
 		| (((bus->number - hose->first_busno) & 0xff) << 16)
 		| (hose->global_number << 24);
         int ret = -1;
 	int rval;

 	rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len);
 	*val = ret;
 	return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
 }

 int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		      int len, u32 val)
 {
 	struct pci_controller *hose = bus->sysdata;
 	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
 		| (((bus->number - hose->first_busno) & 0xff) << 16)
 		| (hose->global_number << 24);
 	int rval;

 	rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL,
 			 addr, len, val);
 	return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
 }

 static struct pci_ops rtas_pci_ops =
 {
 	.read = rtas_read_config,
 	.write = rtas_write_config,
 };

 volatile struct Hydra __iomem *Hydra = NULL;

 int __init
 hydra_init(void)
 {
 	struct device_node *np;
 	struct resource r;

 	np = of_find_node_by_name(NULL, "mac-io");
 	if (np == NULL || of_address_to_resource(np, 0, &r)) {
 		of_node_put(np);
 		return 0;
 	}
 	Hydra = ioremap(r.start, r.end-r.start);
 	printk("Hydra Mac I/O at %llx\n", (unsigned long long)r.start);
 	printk("Hydra Feature_Control was %x",
 	       in_le32(&Hydra->Feature_Control));
 	out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN |
 					   HYDRA_FC_SCSI_CELL_EN |
 					   HYDRA_FC_SCCA_ENABLE |
 					   HYDRA_FC_SCCB_ENABLE |
 					   HYDRA_FC_ARB_BYPASS |
 					   HYDRA_FC_MPIC_ENABLE |
 					   HYDRA_FC_SLOW_SCC_PCLK |
 					   HYDRA_FC_MPIC_IS_MASTER));
 	printk(", now %x\n", in_le32(&Hydra->Feature_Control));
 	return 1;
 }

 #define PRG_CL_RESET_VALID 0x00010000

 static void __init
 setup_python(struct pci_controller *hose, struct device_node *dev)
 {
 	u32 __iomem *reg;
 	u32 val;
 	struct resource r;

 	if (of_address_to_resource(dev, 0, &r)) {
 		printk(KERN_ERR "No address for Python PCI controller\n");
 		return;
 	}

 	/* Clear the magic go-slow bit */
 	reg = ioremap(r.start + 0xf6000, 0x40);
 	BUG_ON(!reg);
 	val = in_be32(&reg[12]);
 	if (val & PRG_CL_RESET_VALID) {
 		out_be32(&reg[12], val & ~PRG_CL_RESET_VALID);
 		in_be32(&reg[12]);
 	}
 	iounmap(reg);

 	setup_indirect_pci(hose, r.start + 0xf8000, r.start + 0xf8010, 0);
 }

 /* Marvell Discovery II based Pegasos 2 */
 static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev)
 {
 	struct device_node *root = of_find_node_by_path("/");
 	struct device_node *rtas;

 	rtas = of_find_node_by_name (root, "rtas");
 	if (rtas) {
 		hose->ops = &rtas_pci_ops;
 		of_node_put(rtas);
 	} else {
 		printk ("RTAS supporting Pegasos OF not found, please upgrade"
 			" your firmware\n");
 	}
 	ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
 	/* keep the reference to the root node */
 }

 void __init
 chrp_find_bridges(void)
 {
 	struct device_node *dev;
 	const int *bus_range;
 	int len, index = -1;
 	struct pci_controller *hose;
 	const unsigned int *dma;
 	const char *model, *machine;
 	int is_longtrail = 0, is_mot = 0, is_pegasos = 0;
 	struct device_node *root = of_find_node_by_path("/");
 	struct resource r;
 	/*
 	 * The PCI host bridge nodes on some machines don't have
 	 * properties to adequately identify them, so we have to
 	 * look at what sort of machine this is as well.
 	 */
 	machine = of_get_property(root, "model", NULL);
 	if (machine != NULL) {
 		is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0;
 		is_mot = strncmp(machine, "MOT", 3) == 0;
 		if (strncmp(machine, "Pegasos2", 8) == 0)
 			is_pegasos = 2;
 		else if (strncmp(machine, "Pegasos", 7) == 0)
 			is_pegasos = 1;
 	}
 	for (dev = root->child; dev != NULL; dev = dev->sibling) {
 		if (dev->type == NULL || strcmp(dev->type, "pci") != 0)
 			continue;
 		++index;
 		/* The GG2 bridge on the LongTrail doesn't have an address */
 		if (of_address_to_resource(dev, 0, &r) && !is_longtrail) {
 			printk(KERN_WARNING "Can't use %s: no address\n",
 			       dev->full_name);
 			continue;
 		}
 		bus_range = of_get_property(dev, "bus-range", &len);
 		if (bus_range == NULL || len < 2 * sizeof(int)) {
 			printk(KERN_WARNING "Can't get bus-range for %s\n",
 				dev->full_name);
 			continue;
 		}
 		if (bus_range[1] == bus_range[0])
 			printk(KERN_INFO "PCI bus %d", bus_range[0]);
 		else
 			printk(KERN_INFO "PCI buses %d..%d",
 			       bus_range[0], bus_range[1]);
 		printk(" controlled by %s", dev->full_name);
 		if (!is_longtrail)
 			printk(" at %llx", (unsigned long long)r.start);
 		printk("\n");

 		hose = pcibios_alloc_controller(dev);
 		if (!hose) {
 			printk("Can't allocate PCI controller structure for %s\n",
 				dev->full_name);
 			continue;
 		}
 		hose->first_busno = bus_range[0];
 		hose->last_busno = bus_range[1];

 		model = of_get_property(dev, "model", NULL);
 		if (model == NULL)
 			model = "<none>";
 		if (of_device_is_compatible(dev, "IBM,python")) {
 			setup_python(hose, dev);
 		} else if (is_mot
 			   || strncmp(model, "Motorola, Grackle", 17) == 0) {
 			setup_grackle(hose);
 		} else if (is_longtrail) {
 			void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000);
 			hose->ops = &gg2_pci_ops;
 			hose->cfg_data = p;
 			gg2_pci_config_base = p;
 		} else if (is_pegasos == 1) {
 			setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc, 0);
 		} else if (is_pegasos == 2) {
 			setup_peg2(hose, dev);
 		} else if (!strncmp(model, "IBM,CPC710", 10)) {
 			setup_indirect_pci(hose,
 					   r.start + 0x000f8000,
 					   r.start + 0x000f8010,
 					   0);
 			if (index == 0) {
 				dma = of_get_property(dev, "system-dma-base",
 							&len);
 				if (dma && len >= sizeof(*dma)) {
 					dma = (unsigned int *)
 						(((unsigned long)dma) +
 						len - sizeof(*dma));
 						pci_dram_offset = *dma;
 				}
 			}
 		} else {
 			printk("No methods for %s (model %s), using RTAS\n",
 			       dev->full_name, model);
 			hose->ops = &rtas_pci_ops;
 		}

 		pci_process_bridge_OF_ranges(hose, dev, index == 0);

 		/* check the first bridge for a property that we can
 		   use to set pci_dram_offset */
 		dma = of_get_property(dev, "ibm,dma-ranges", &len);
 		if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) {
 			pci_dram_offset = dma[2] - dma[3];
 			printk("pci_dram_offset = %lx\n", pci_dram_offset);
 		}
 	}
 	of_node_put(root);
 }

 /* SL82C105 IDE Control/Status Register */
 #define SL82C105_IDECSR                0x40

 /* Fixup for Winbond ATA quirk, required for briq mostly because the
  * 8259 is configured for level sensitive IRQ 14 and so wants the
  * ATA controller to be set to fully native mode or bad things
  * will happen.
  */
 static void __devinit chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105)
 {
 	u8 progif;

 	/* If non-briq machines need that fixup too, please speak up */
 	if (!machine_is(chrp) || _chrp_type != _CHRP_briq)
 		return;

 	if ((sl82c105->class & 5) != 5) {
 		printk("W83C553: Switching SL82C105 IDE to PCI native mode\n");
 		/* Enable SL82C105 PCI native IDE mode */
 		pci_read_config_byte(sl82c105, PCI_CLASS_PROG, &progif);
 		pci_write_config_byte(sl82c105, PCI_CLASS_PROG, progif | 0x05);
 		sl82c105->class |= 0x05;
 		/* Disable SL82C105 second port */
 		pci_write_config_word(sl82c105, SL82C105_IDECSR, 0x0003);
 		/* Clear IO BARs, they will be reassigned */
 		pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_0, 0);
 		pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_1, 0);
 		pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_2, 0);
 		pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_3, 0);
 	}
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
 			chrp_pci_fixup_winbond_ata);

 /* Pegasos2 firmware version 20040810 configures the built-in IDE controller
  * in legacy mode, but sets the PCI registers to PCI native mode.
  * The chip can only operate in legacy mode, so force the PCI class into legacy
  * mode as well. The same fixup must be done to the class-code property in
  * the IDE node /pci@80000000/ide@C,1
  */
 static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
 {
 	u8 progif;
 	struct pci_dev *viaisa;

 	if (!machine_is(chrp) || _chrp_type != _CHRP_Pegasos)
 		return;
 	if (viaide->irq != 14)
 		return;

 	viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
 	if (!viaisa)
 		return;
 	dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n");

 	pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
 	pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
 	viaide->class &= ~0x5;

 	pci_dev_put(viaisa);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata);
	/*
	* CHRP pci routines.
	*/

	#include <linux/kernel.h>
	#include <linux/pci.h>
	#include <linux/delay.h>
	#include <linux/string.h>
	#include <linux/init.h>

	#include <asm/io.h>
	#include <asm/pgtable.h>
	#include <asm/irq.h>
	#include <asm/hydra.h>
	#include <asm/prom.h>
	#include <asm/machdep.h>
	#include <asm/sections.h>
	#include <asm/pci-bridge.h>
	#include <asm/grackle.h>
	#include <asm/rtas.h>

	#include "chrp.h"
	#include "gg2.h"

	/* LongTrail */
	void __iomem *gg2_pci_config_base;

	/*
	* The VLSI Golden Gate II has only 512K of PCI configuration space, so we
	* limit the bus number to 3 bits
	*/

	int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
	int len, u32 *val)
	{
	volatile void __iomem *cfg_data;
	struct pci_controller *hose = bus->sysdata;

	if (bus->number > 7)
	return PCIBIOS_DEVICE_NOT_FOUND;
	/*
	* Note: the caller has already checked that off is
	* suitably aligned and that len is 1, 2 or 4.
	*/
	cfg_data = hose->cfg_data + ((bus->number<<16) \| (devfn<<8) \| off);
	switch (len) {
	case 1:
	*val = in_8(cfg_data);
	break;
	case 2:
	*val = in_le16(cfg_data);
	break;
	default:
	*val = in_le32(cfg_data);
	break;
	}
	return PCIBIOS_SUCCESSFUL;
	}

	int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
	int len, u32 val)
	{
	volatile void __iomem *cfg_data;
	struct pci_controller *hose = bus->sysdata;

	if (bus->number > 7)
	return PCIBIOS_DEVICE_NOT_FOUND;
	/*
	* Note: the caller has already checked that off is
	* suitably aligned and that len is 1, 2 or 4.
	*/
	cfg_data = hose->cfg_data + ((bus->number<<16) \| (devfn<<8) \| off);
	switch (len) {
	case 1:
	out_8(cfg_data, val);
	break;
	case 2:
	out_le16(cfg_data, val);
	break;
	default:
	out_le32(cfg_data, val);
	break;
	}
	return PCIBIOS_SUCCESSFUL;
	}

	static struct pci_ops gg2_pci_ops =
	{
	.read = gg2_read_config,
	.write = gg2_write_config,
	};

	/*
	* Access functions for PCI config space using RTAS calls.
	*/
	int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
	int len, u32 *val)
	{
	struct pci_controller *hose = bus->sysdata;
	unsigned long addr = (offset & 0xff) \| ((devfn & 0xff) << 8)
	\| (((bus->number - hose->first_busno) & 0xff) << 16)
	\| (hose->global_number << 24);
	int ret = -1;
	int rval;

	rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len);
	*val = ret;
	return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
	}

	int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
	int len, u32 val)
	{
	struct pci_controller *hose = bus->sysdata;
	unsigned long addr = (offset & 0xff) \| ((devfn & 0xff) << 8)
	\| (((bus->number - hose->first_busno) & 0xff) << 16)
	\| (hose->global_number << 24);
	int rval;

	rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL,
	addr, len, val);
	return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
	}

	static struct pci_ops rtas_pci_ops =
	{
	.read = rtas_read_config,
	.write = rtas_write_config,
	};

	volatile struct Hydra __iomem *Hydra = NULL;

	int __init
	hydra_init(void)
	{
	struct device_node *np;
	struct resource r;

	np = of_find_node_by_name(NULL, "mac-io");
	if (np == NULL \|\| of_address_to_resource(np, 0, &r)) {
	of_node_put(np);
	return 0;
	}
	Hydra = ioremap(r.start, r.end-r.start);
	printk("Hydra Mac I/O at %llx\n", (unsigned long long)r.start);
	printk("Hydra Feature_Control was %x",
	in_le32(&Hydra->Feature_Control));
	out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN \|
	HYDRA_FC_SCSI_CELL_EN \|
	HYDRA_FC_SCCA_ENABLE \|
	HYDRA_FC_SCCB_ENABLE \|
	HYDRA_FC_ARB_BYPASS \|
	HYDRA_FC_MPIC_ENABLE \|
	HYDRA_FC_SLOW_SCC_PCLK \|
	HYDRA_FC_MPIC_IS_MASTER));
	printk(", now %x\n", in_le32(&Hydra->Feature_Control));
	return 1;
	}

	#define PRG_CL_RESET_VALID 0x00010000

	static void __init
	setup_python(struct pci_controller hose, struct device_node dev)
	{
	u32 __iomem *reg;
	u32 val;
	struct resource r;

	if (of_address_to_resource(dev, 0, &r)) {
	printk(KERN_ERR "No address for Python PCI controller\n");
	return;
	}

	/* Clear the magic go-slow bit */
	reg = ioremap(r.start + 0xf6000, 0x40);
	BUG_ON(!reg);
	val = in_be32(&reg[12]);
	if (val & PRG_CL_RESET_VALID) {
	out_be32(&reg[12], val & ~PRG_CL_RESET_VALID);
	in_be32(&reg[12]);
	}
	iounmap(reg);

	setup_indirect_pci(hose, r.start + 0xf8000, r.start + 0xf8010, 0);
	}

	/* Marvell Discovery II based Pegasos 2 */
	static void __init setup_peg2(struct pci_controller hose, struct device_node dev)
	{
	struct device_node *root = of_find_node_by_path("/");
	struct device_node *rtas;

	rtas = of_find_node_by_name (root, "rtas");
	if (rtas) {
	hose->ops = &rtas_pci_ops;
	of_node_put(rtas);
	} else {
	printk ("RTAS supporting Pegasos OF not found, please upgrade"
	" your firmware\n");
	}
	ppc_pci_flags \|= PPC_PCI_REASSIGN_ALL_BUS;
	/* keep the reference to the root node */
	}

	void __init
	chrp_find_bridges(void)
	{
	struct device_node *dev;
	const int *bus_range;
	int len, index = -1;
	struct pci_controller *hose;
	const unsigned int *dma;
	const char model, machine;
	int is_longtrail = 0, is_mot = 0, is_pegasos = 0;
	struct device_node *root = of_find_node_by_path("/");
	struct resource r;
	/*
	* The PCI host bridge nodes on some machines don't have
	* properties to adequately identify them, so we have to
	* look at what sort of machine this is as well.
	*/
	machine = of_get_property(root, "model", NULL);
	if (machine != NULL) {
	is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0;
	is_mot = strncmp(machine, "MOT", 3) == 0;
	if (strncmp(machine, "Pegasos2", 8) == 0)
	is_pegasos = 2;
	else if (strncmp(machine, "Pegasos", 7) == 0)
	is_pegasos = 1;
	}
	for (dev = root->child; dev != NULL; dev = dev->sibling) {
	if (dev->type == NULL \|\| strcmp(dev->type, "pci") != 0)
	continue;
	++index;
	/* The GG2 bridge on the LongTrail doesn't have an address */
	if (of_address_to_resource(dev, 0, &r) && !is_longtrail) {
	printk(KERN_WARNING "Can't use %s: no address\n",
	dev->full_name);
	continue;
	}
	bus_range = of_get_property(dev, "bus-range", &len);
	if (bus_range == NULL \|\| len < 2 * sizeof(int)) {
	printk(KERN_WARNING "Can't get bus-range for %s\n",
	dev->full_name);
	continue;
	}
	if (bus_range[1] == bus_range[0])
	printk(KERN_INFO "PCI bus %d", bus_range[0]);
	else
	printk(KERN_INFO "PCI buses %d..%d",
	bus_range[0], bus_range[1]);
	printk(" controlled by %s", dev->full_name);
	if (!is_longtrail)
	printk(" at %llx", (unsigned long long)r.start);
	printk("\n");

	hose = pcibios_alloc_controller(dev);
	if (!hose) {
	printk("Can't allocate PCI controller structure for %s\n",
	dev->full_name);
	continue;
	}
	hose->first_busno = bus_range[0];
	hose->last_busno = bus_range[1];

	model = of_get_property(dev, "model", NULL);
	if (model == NULL)
	model = "<none>";
	if (of_device_is_compatible(dev, "IBM,python")) {
	setup_python(hose, dev);
	} else if (is_mot
	\|\| strncmp(model, "Motorola, Grackle", 17) == 0) {
	setup_grackle(hose);
	} else if (is_longtrail) {
	void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000);
	hose->ops = &gg2_pci_ops;
	hose->cfg_data = p;
	gg2_pci_config_base = p;
	} else if (is_pegasos == 1) {
	setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc, 0);
	} else if (is_pegasos == 2) {
	setup_peg2(hose, dev);
	} else if (!strncmp(model, "IBM,CPC710", 10)) {
	setup_indirect_pci(hose,
	r.start + 0x000f8000,
	r.start + 0x000f8010,
	0);
	if (index == 0) {
	dma = of_get_property(dev, "system-dma-base",
	&len);
	if (dma && len >= sizeof(*dma)) {
	dma = (unsigned int *)
	(((unsigned long)dma) +
	len - sizeof(*dma));
	pci_dram_offset = *dma;
	}
	}
	} else {
	printk("No methods for %s (model %s), using RTAS\n",
	dev->full_name, model);
	hose->ops = &rtas_pci_ops;
	}

	pci_process_bridge_OF_ranges(hose, dev, index == 0);

	/* check the first bridge for a property that we can
	use to set pci_dram_offset */
	dma = of_get_property(dev, "ibm,dma-ranges", &len);
	if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) {
	pci_dram_offset = dma[2] - dma[3];
	printk("pci_dram_offset = %lx\n", pci_dram_offset);
	}
	}
	of_node_put(root);
	}

	/* SL82C105 IDE Control/Status Register */
	#define SL82C105_IDECSR 0x40

	/* Fixup for Winbond ATA quirk, required for briq mostly because the
	* 8259 is configured for level sensitive IRQ 14 and so wants the
	* ATA controller to be set to fully native mode or bad things
	* will happen.
	*/
	static void __devinit chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105)
	{
	u8 progif;

	/* If non-briq machines need that fixup too, please speak up */
	if (!machine_is(chrp) \|\| _chrp_type != _CHRP_briq)
	return;

	if ((sl82c105->class & 5) != 5) {
	printk("W83C553: Switching SL82C105 IDE to PCI native mode\n");
	/* Enable SL82C105 PCI native IDE mode */
	pci_read_config_byte(sl82c105, PCI_CLASS_PROG, &progif);
	pci_write_config_byte(sl82c105, PCI_CLASS_PROG, progif \| 0x05);
	sl82c105->class \|= 0x05;
	/* Disable SL82C105 second port */
	pci_write_config_word(sl82c105, SL82C105_IDECSR, 0x0003);
	/* Clear IO BARs, they will be reassigned */
	pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_0, 0);
	pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_1, 0);
	pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_2, 0);
	pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_3, 0);
	}
	}
	DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
	chrp_pci_fixup_winbond_ata);

	/* Pegasos2 firmware version 20040810 configures the built-in IDE controller
	* in legacy mode, but sets the PCI registers to PCI native mode.
	* The chip can only operate in legacy mode, so force the PCI class into legacy
	* mode as well. The same fixup must be done to the class-code property in
	* the IDE node /pci@80000000/ide@C,1
	*/
	static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
	{
	u8 progif;
	struct pci_dev *viaisa;

	if (!machine_is(chrp) \|\| _chrp_type != _CHRP_Pegasos)
	return;
	if (viaide->irq != 14)
	return;

	viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
	if (!viaisa)
	return;
	dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n");

	pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
	pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
	viaide->class &= ~0x5;

	pci_dev_put(viaisa);
	}
	DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata);