| /* |
| * udc.c - ChipIdea UDC driver |
| * |
| * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. |
| * |
| * Author: David Lopo |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/dmapool.h> |
| #include <linux/err.h> |
| #include <linux/irqreturn.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/otg-fsm.h> |
| #include <linux/usb/chipidea.h> |
| |
| #include "ci.h" |
| #include "udc.h" |
| #include "bits.h" |
| #include "otg.h" |
| #include "otg_fsm.h" |
| |
| /* control endpoint description */ |
| static const struct usb_endpoint_descriptor |
| ctrl_endpt_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), |
| }; |
| |
| static const struct usb_endpoint_descriptor |
| ctrl_endpt_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), |
| }; |
| |
| /** |
| * hw_ep_bit: calculates the bit number |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * |
| * This function returns bit number |
| */ |
| static inline int hw_ep_bit(int num, int dir) |
| { |
| return num + ((dir == TX) ? 16 : 0); |
| } |
| |
| static inline int ep_to_bit(struct ci_hdrc *ci, int n) |
| { |
| int fill = 16 - ci->hw_ep_max / 2; |
| |
| if (n >= ci->hw_ep_max / 2) |
| n += fill; |
| |
| return n; |
| } |
| |
| /** |
| * hw_device_state: enables/disables interrupts (execute without interruption) |
| * @dma: 0 => disable, !0 => enable and set dma engine |
| * |
| * This function returns an error code |
| */ |
| static int hw_device_state(struct ci_hdrc *ci, u32 dma) |
| { |
| if (dma) { |
| hw_write(ci, OP_ENDPTLISTADDR, ~0, dma); |
| /* interrupt, error, port change, reset, sleep/suspend */ |
| hw_write(ci, OP_USBINTR, ~0, |
| USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); |
| } else { |
| hw_write(ci, OP_USBINTR, ~0, 0); |
| } |
| return 0; |
| } |
| |
| /** |
| * hw_ep_flush: flush endpoint fifo (execute without interruption) |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * |
| * This function returns an error code |
| */ |
| static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir) |
| { |
| int n = hw_ep_bit(num, dir); |
| |
| do { |
| /* flush any pending transfer */ |
| hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n)); |
| while (hw_read(ci, OP_ENDPTFLUSH, BIT(n))) |
| cpu_relax(); |
| } while (hw_read(ci, OP_ENDPTSTAT, BIT(n))); |
| |
| return 0; |
| } |
| |
| /** |
| * hw_ep_disable: disables endpoint (execute without interruption) |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * |
| * This function returns an error code |
| */ |
| static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir) |
| { |
| hw_write(ci, OP_ENDPTCTRL + num, |
| (dir == TX) ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); |
| return 0; |
| } |
| |
| /** |
| * hw_ep_enable: enables endpoint (execute without interruption) |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * @type: endpoint type |
| * |
| * This function returns an error code |
| */ |
| static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type) |
| { |
| u32 mask, data; |
| |
| if (dir == TX) { |
| mask = ENDPTCTRL_TXT; /* type */ |
| data = type << __ffs(mask); |
| |
| mask |= ENDPTCTRL_TXS; /* unstall */ |
| mask |= ENDPTCTRL_TXR; /* reset data toggle */ |
| data |= ENDPTCTRL_TXR; |
| mask |= ENDPTCTRL_TXE; /* enable */ |
| data |= ENDPTCTRL_TXE; |
| } else { |
| mask = ENDPTCTRL_RXT; /* type */ |
| data = type << __ffs(mask); |
| |
| mask |= ENDPTCTRL_RXS; /* unstall */ |
| mask |= ENDPTCTRL_RXR; /* reset data toggle */ |
| data |= ENDPTCTRL_RXR; |
| mask |= ENDPTCTRL_RXE; /* enable */ |
| data |= ENDPTCTRL_RXE; |
| } |
| hw_write(ci, OP_ENDPTCTRL + num, mask, data); |
| return 0; |
| } |
| |
| /** |
| * hw_ep_get_halt: return endpoint halt status |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * |
| * This function returns 1 if endpoint halted |
| */ |
| static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir) |
| { |
| u32 mask = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; |
| |
| return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0; |
| } |
| |
| /** |
| * hw_ep_prime: primes endpoint (execute without interruption) |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * @is_ctrl: true if control endpoint |
| * |
| * This function returns an error code |
| */ |
| static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl) |
| { |
| int n = hw_ep_bit(num, dir); |
| |
| /* Synchronize before ep prime */ |
| wmb(); |
| |
| if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) |
| return -EAGAIN; |
| |
| hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n)); |
| |
| while (hw_read(ci, OP_ENDPTPRIME, BIT(n))) |
| cpu_relax(); |
| if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) |
| return -EAGAIN; |
| |
| /* status shoult be tested according with manual but it doesn't work */ |
| return 0; |
| } |
| |
| /** |
| * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute |
| * without interruption) |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * @value: true => stall, false => unstall |
| * |
| * This function returns an error code |
| */ |
| static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value) |
| { |
| if (value != 0 && value != 1) |
| return -EINVAL; |
| |
| do { |
| enum ci_hw_regs reg = OP_ENDPTCTRL + num; |
| u32 mask_xs = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; |
| u32 mask_xr = (dir == TX) ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; |
| |
| /* data toggle - reserved for EP0 but it's in ESS */ |
| hw_write(ci, reg, mask_xs|mask_xr, |
| value ? mask_xs : mask_xr); |
| } while (value != hw_ep_get_halt(ci, num, dir)); |
| |
| return 0; |
| } |
| |
| /** |
| * hw_is_port_high_speed: test if port is high speed |
| * |
| * This function returns true if high speed port |
| */ |
| static int hw_port_is_high_speed(struct ci_hdrc *ci) |
| { |
| return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) : |
| hw_read(ci, OP_PORTSC, PORTSC_HSP); |
| } |
| |
| /** |
| * hw_test_and_clear_complete: test & clear complete status (execute without |
| * interruption) |
| * @n: endpoint number |
| * |
| * This function returns complete status |
| */ |
| static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n) |
| { |
| n = ep_to_bit(ci, n); |
| return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n)); |
| } |
| |
| /** |
| * hw_test_and_clear_intr_active: test & clear active interrupts (execute |
| * without interruption) |
| * |
| * This function returns active interrutps |
| */ |
| static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci) |
| { |
| u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci); |
| |
| hw_write(ci, OP_USBSTS, ~0, reg); |
| return reg; |
| } |
| |
| /** |
| * hw_test_and_clear_setup_guard: test & clear setup guard (execute without |
| * interruption) |
| * |
| * This function returns guard value |
| */ |
| static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci) |
| { |
| return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0); |
| } |
| |
| /** |
| * hw_test_and_set_setup_guard: test & set setup guard (execute without |
| * interruption) |
| * |
| * This function returns guard value |
| */ |
| static int hw_test_and_set_setup_guard(struct ci_hdrc *ci) |
| { |
| return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); |
| } |
| |
| /** |
| * hw_usb_set_address: configures USB address (execute without interruption) |
| * @value: new USB address |
| * |
| * This function explicitly sets the address, without the "USBADRA" (advance) |
| * feature, which is not supported by older versions of the controller. |
| */ |
| static void hw_usb_set_address(struct ci_hdrc *ci, u8 value) |
| { |
| hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR, |
| value << __ffs(DEVICEADDR_USBADR)); |
| } |
| |
| /** |
| * hw_usb_reset: restart device after a bus reset (execute without |
| * interruption) |
| * |
| * This function returns an error code |
| */ |
| static int hw_usb_reset(struct ci_hdrc *ci) |
| { |
| hw_usb_set_address(ci, 0); |
| |
| /* ESS flushes only at end?!? */ |
| hw_write(ci, OP_ENDPTFLUSH, ~0, ~0); |
| |
| /* clear setup token semaphores */ |
| hw_write(ci, OP_ENDPTSETUPSTAT, 0, 0); |
| |
| /* clear complete status */ |
| hw_write(ci, OP_ENDPTCOMPLETE, 0, 0); |
| |
| /* wait until all bits cleared */ |
| while (hw_read(ci, OP_ENDPTPRIME, ~0)) |
| udelay(10); /* not RTOS friendly */ |
| |
| /* reset all endpoints ? */ |
| |
| /* reset internal status and wait for further instructions |
| no need to verify the port reset status (ESS does it) */ |
| |
| return 0; |
| } |
| |
| /****************************************************************************** |
| * UTIL block |
| *****************************************************************************/ |
| |
| static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq, |
| unsigned length) |
| { |
| int i; |
| u32 temp; |
| struct td_node *lastnode, *node = kzalloc(sizeof(struct td_node), |
| GFP_ATOMIC); |
| |
| if (node == NULL) |
| return -ENOMEM; |
| |
| node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC, &node->dma); |
| if (node->ptr == NULL) { |
| kfree(node); |
| return -ENOMEM; |
| } |
| |
| node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES)); |
| node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES); |
| node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE); |
| if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) { |
| u32 mul = hwreq->req.length / hwep->ep.maxpacket; |
| |
| if (hwreq->req.length == 0 |
| || hwreq->req.length % hwep->ep.maxpacket) |
| mul++; |
| node->ptr->token |= cpu_to_le32(mul << __ffs(TD_MULTO)); |
| } |
| |
| temp = (u32) (hwreq->req.dma + hwreq->req.actual); |
| if (length) { |
| node->ptr->page[0] = cpu_to_le32(temp); |
| for (i = 1; i < TD_PAGE_COUNT; i++) { |
| u32 page = temp + i * CI_HDRC_PAGE_SIZE; |
| page &= ~TD_RESERVED_MASK; |
| node->ptr->page[i] = cpu_to_le32(page); |
| } |
| } |
| |
| hwreq->req.actual += length; |
| |
| if (!list_empty(&hwreq->tds)) { |
| /* get the last entry */ |
| lastnode = list_entry(hwreq->tds.prev, |
| struct td_node, td); |
| lastnode->ptr->next = cpu_to_le32(node->dma); |
| } |
| |
| INIT_LIST_HEAD(&node->td); |
| list_add_tail(&node->td, &hwreq->tds); |
| |
| return 0; |
| } |
| |
| /** |
| * _usb_addr: calculates endpoint address from direction & number |
| * @ep: endpoint |
| */ |
| static inline u8 _usb_addr(struct ci_hw_ep *ep) |
| { |
| return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num; |
| } |
| |
| /** |
| * _hardware_enqueue: configures a request at hardware level |
| * @hwep: endpoint |
| * @hwreq: request |
| * |
| * This function returns an error code |
| */ |
| static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) |
| { |
| struct ci_hdrc *ci = hwep->ci; |
| int ret = 0; |
| unsigned rest = hwreq->req.length; |
| int pages = TD_PAGE_COUNT; |
| struct td_node *firstnode, *lastnode; |
| |
| /* don't queue twice */ |
| if (hwreq->req.status == -EALREADY) |
| return -EALREADY; |
| |
| hwreq->req.status = -EALREADY; |
| |
| ret = usb_gadget_map_request_by_dev(ci->dev->parent, |
| &hwreq->req, hwep->dir); |
| if (ret) |
| return ret; |
| |
| /* |
| * The first buffer could be not page aligned. |
| * In that case we have to span into one extra td. |
| */ |
| if (hwreq->req.dma % PAGE_SIZE) |
| pages--; |
| |
| if (rest == 0) { |
| ret = add_td_to_list(hwep, hwreq, 0); |
| if (ret < 0) |
| goto done; |
| } |
| |
| while (rest > 0) { |
| unsigned count = min(hwreq->req.length - hwreq->req.actual, |
| (unsigned)(pages * CI_HDRC_PAGE_SIZE)); |
| ret = add_td_to_list(hwep, hwreq, count); |
| if (ret < 0) |
| goto done; |
| |
| rest -= count; |
| } |
| |
| if (hwreq->req.zero && hwreq->req.length && hwep->dir == TX |
| && (hwreq->req.length % hwep->ep.maxpacket == 0)) { |
| ret = add_td_to_list(hwep, hwreq, 0); |
| if (ret < 0) |
| goto done; |
| } |
| |
| firstnode = list_first_entry(&hwreq->tds, struct td_node, td); |
| |
| lastnode = list_entry(hwreq->tds.prev, |
| struct td_node, td); |
| |
| lastnode->ptr->next = cpu_to_le32(TD_TERMINATE); |
| if (!hwreq->req.no_interrupt) |
| lastnode->ptr->token |= cpu_to_le32(TD_IOC); |
| wmb(); |
| |
| hwreq->req.actual = 0; |
| if (!list_empty(&hwep->qh.queue)) { |
| struct ci_hw_req *hwreqprev; |
| int n = hw_ep_bit(hwep->num, hwep->dir); |
| int tmp_stat; |
| struct td_node *prevlastnode; |
| u32 next = firstnode->dma & TD_ADDR_MASK; |
| |
| hwreqprev = list_entry(hwep->qh.queue.prev, |
| struct ci_hw_req, queue); |
| prevlastnode = list_entry(hwreqprev->tds.prev, |
| struct td_node, td); |
| |
| prevlastnode->ptr->next = cpu_to_le32(next); |
| wmb(); |
| if (hw_read(ci, OP_ENDPTPRIME, BIT(n))) |
| goto done; |
| do { |
| hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); |
| tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n)); |
| } while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW)); |
| hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0); |
| if (tmp_stat) |
| goto done; |
| } |
| |
| /* QH configuration */ |
| hwep->qh.ptr->td.next = cpu_to_le32(firstnode->dma); |
| hwep->qh.ptr->td.token &= |
| cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE)); |
| |
| if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) { |
| u32 mul = hwreq->req.length / hwep->ep.maxpacket; |
| |
| if (hwreq->req.length == 0 |
| || hwreq->req.length % hwep->ep.maxpacket) |
| mul++; |
| hwep->qh.ptr->cap |= cpu_to_le32(mul << __ffs(QH_MULT)); |
| } |
| |
| ret = hw_ep_prime(ci, hwep->num, hwep->dir, |
| hwep->type == USB_ENDPOINT_XFER_CONTROL); |
| done: |
| return ret; |
| } |
| |
| /* |
| * free_pending_td: remove a pending request for the endpoint |
| * @hwep: endpoint |
| */ |
| static void free_pending_td(struct ci_hw_ep *hwep) |
| { |
| struct td_node *pending = hwep->pending_td; |
| |
| dma_pool_free(hwep->td_pool, pending->ptr, pending->dma); |
| hwep->pending_td = NULL; |
| kfree(pending); |
| } |
| |
| static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep, |
| struct td_node *node) |
| { |
| hwep->qh.ptr->td.next = cpu_to_le32(node->dma); |
| hwep->qh.ptr->td.token &= |
| cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE)); |
| |
| return hw_ep_prime(ci, hwep->num, hwep->dir, |
| hwep->type == USB_ENDPOINT_XFER_CONTROL); |
| } |
| |
| /** |
| * _hardware_dequeue: handles a request at hardware level |
| * @gadget: gadget |
| * @hwep: endpoint |
| * |
| * This function returns an error code |
| */ |
| static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) |
| { |
| u32 tmptoken; |
| struct td_node *node, *tmpnode; |
| unsigned remaining_length; |
| unsigned actual = hwreq->req.length; |
| struct ci_hdrc *ci = hwep->ci; |
| |
| if (hwreq->req.status != -EALREADY) |
| return -EINVAL; |
| |
| hwreq->req.status = 0; |
| |
| list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { |
| tmptoken = le32_to_cpu(node->ptr->token); |
| if ((TD_STATUS_ACTIVE & tmptoken) != 0) { |
| int n = hw_ep_bit(hwep->num, hwep->dir); |
| |
| if (ci->rev == CI_REVISION_24) |
| if (!hw_read(ci, OP_ENDPTSTAT, BIT(n))) |
| reprime_dtd(ci, hwep, node); |
| hwreq->req.status = -EALREADY; |
| return -EBUSY; |
| } |
| |
| remaining_length = (tmptoken & TD_TOTAL_BYTES); |
| remaining_length >>= __ffs(TD_TOTAL_BYTES); |
| actual -= remaining_length; |
| |
| hwreq->req.status = tmptoken & TD_STATUS; |
| if ((TD_STATUS_HALTED & hwreq->req.status)) { |
| hwreq->req.status = -EPIPE; |
| break; |
| } else if ((TD_STATUS_DT_ERR & hwreq->req.status)) { |
| hwreq->req.status = -EPROTO; |
| break; |
| } else if ((TD_STATUS_TR_ERR & hwreq->req.status)) { |
| hwreq->req.status = -EILSEQ; |
| break; |
| } |
| |
| if (remaining_length) { |
| if (hwep->dir == TX) { |
| hwreq->req.status = -EPROTO; |
| break; |
| } |
| } |
| /* |
| * As the hardware could still address the freed td |
| * which will run the udc unusable, the cleanup of the |
| * td has to be delayed by one. |
| */ |
| if (hwep->pending_td) |
| free_pending_td(hwep); |
| |
| hwep->pending_td = node; |
| list_del_init(&node->td); |
| } |
| |
| usb_gadget_unmap_request_by_dev(hwep->ci->dev->parent, |
| &hwreq->req, hwep->dir); |
| |
| hwreq->req.actual += actual; |
| |
| if (hwreq->req.status) |
| return hwreq->req.status; |
| |
| return hwreq->req.actual; |
| } |
| |
| /** |
| * _ep_nuke: dequeues all endpoint requests |
| * @hwep: endpoint |
| * |
| * This function returns an error code |
| * Caller must hold lock |
| */ |
| static int _ep_nuke(struct ci_hw_ep *hwep) |
| __releases(hwep->lock) |
| __acquires(hwep->lock) |
| { |
| struct td_node *node, *tmpnode; |
| if (hwep == NULL) |
| return -EINVAL; |
| |
| hw_ep_flush(hwep->ci, hwep->num, hwep->dir); |
| |
| while (!list_empty(&hwep->qh.queue)) { |
| |
| /* pop oldest request */ |
| struct ci_hw_req *hwreq = list_entry(hwep->qh.queue.next, |
| struct ci_hw_req, queue); |
| |
| list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { |
| dma_pool_free(hwep->td_pool, node->ptr, node->dma); |
| list_del_init(&node->td); |
| node->ptr = NULL; |
| kfree(node); |
| } |
| |
| list_del_init(&hwreq->queue); |
| hwreq->req.status = -ESHUTDOWN; |
| |
| if (hwreq->req.complete != NULL) { |
| spin_unlock(hwep->lock); |
| usb_gadget_giveback_request(&hwep->ep, &hwreq->req); |
| spin_lock(hwep->lock); |
| } |
| } |
| |
| if (hwep->pending_td) |
| free_pending_td(hwep); |
| |
| return 0; |
| } |
| |
| static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer) |
| { |
| struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); |
| int direction, retval = 0; |
| unsigned long flags; |
| |
| if (ep == NULL || hwep->ep.desc == NULL) |
| return -EINVAL; |
| |
| if (usb_endpoint_xfer_isoc(hwep->ep.desc)) |
| return -EOPNOTSUPP; |
| |
| spin_lock_irqsave(hwep->lock, flags); |
| |
| if (value && hwep->dir == TX && check_transfer && |
| !list_empty(&hwep->qh.queue) && |
| !usb_endpoint_xfer_control(hwep->ep.desc)) { |
| spin_unlock_irqrestore(hwep->lock, flags); |
| return -EAGAIN; |
| } |
| |
| direction = hwep->dir; |
| do { |
| retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value); |
| |
| if (!value) |
| hwep->wedge = 0; |
| |
| if (hwep->type == USB_ENDPOINT_XFER_CONTROL) |
| hwep->dir = (hwep->dir == TX) ? RX : TX; |
| |
| } while (hwep->dir != direction); |
| |
| spin_unlock_irqrestore(hwep->lock, flags); |
| return retval; |
| } |
| |
| |
| /** |
| * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts |
| * @gadget: gadget |
| * |
| * This function returns an error code |
| */ |
| static int _gadget_stop_activity(struct usb_gadget *gadget) |
| { |
| struct usb_ep *ep; |
| struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); |
| unsigned long flags; |
| |
| /* flush all endpoints */ |
| gadget_for_each_ep(ep, gadget) { |
| usb_ep_fifo_flush(ep); |
| } |
| usb_ep_fifo_flush(&ci->ep0out->ep); |
| usb_ep_fifo_flush(&ci->ep0in->ep); |
| |
| /* make sure to disable all endpoints */ |
| gadget_for_each_ep(ep, gadget) { |
| usb_ep_disable(ep); |
| } |
| |
| if (ci->status != NULL) { |
| usb_ep_free_request(&ci->ep0in->ep, ci->status); |
| ci->status = NULL; |
| } |
| |
| spin_lock_irqsave(&ci->lock, flags); |
| ci->gadget.speed = USB_SPEED_UNKNOWN; |
| ci->remote_wakeup = 0; |
| ci->suspended = 0; |
| spin_unlock_irqrestore(&ci->lock, flags); |
| |
| return 0; |
| } |
| |
| /****************************************************************************** |
| * ISR block |
| *****************************************************************************/ |
| /** |
| * isr_reset_handler: USB reset interrupt handler |
| * @ci: UDC device |
| * |
| * This function resets USB engine after a bus reset occurred |
| */ |
| static void isr_reset_handler(struct ci_hdrc *ci) |
| __releases(ci->lock) |
| __acquires(ci->lock) |
| { |
| int retval; |
| |
| spin_unlock(&ci->lock); |
| if (ci->gadget.speed != USB_SPEED_UNKNOWN) |
| usb_gadget_udc_reset(&ci->gadget, ci->driver); |
| |
| retval = _gadget_stop_activity(&ci->gadget); |
| if (retval) |
| goto done; |
| |
| retval = hw_usb_reset(ci); |
| if (retval) |
| goto done; |
| |
| ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC); |
| if (ci->status == NULL) |
| retval = -ENOMEM; |
| |
| done: |
| spin_lock(&ci->lock); |
| |
| if (retval) |
| dev_err(ci->dev, "error: %i\n", retval); |
| } |
| |
| /** |
| * isr_get_status_complete: get_status request complete function |
| * @ep: endpoint |
| * @req: request handled |
| * |
| * Caller must release lock |
| */ |
| static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| if (ep == NULL || req == NULL) |
| return; |
| |
| kfree(req->buf); |
| usb_ep_free_request(ep, req); |
| } |
| |
| /** |
| * _ep_queue: queues (submits) an I/O request to an endpoint |
| * @ep: endpoint |
| * @req: request |
| * @gfp_flags: GFP flags (not used) |
| * |
| * Caller must hold lock |
| * This function returns an error code |
| */ |
| static int _ep_queue(struct usb_ep *ep, struct usb_request *req, |
| gfp_t __maybe_unused gfp_flags) |
| { |
| struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); |
| struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req); |
| struct ci_hdrc *ci = hwep->ci; |
| int retval = 0; |
| |
| if (ep == NULL || req == NULL || hwep->ep.desc == NULL) |
| return -EINVAL; |
| |
| if (hwep->type == USB_ENDPOINT_XFER_CONTROL) { |
| if (req->length) |
| hwep = (ci->ep0_dir == RX) ? |
| ci->ep0out : ci->ep0in; |
| if (!list_empty(&hwep->qh.queue)) { |
| _ep_nuke(hwep); |
| dev_warn(hwep->ci->dev, "endpoint ctrl %X nuked\n", |
| _usb_addr(hwep)); |
| } |
| } |
| |
| if (usb_endpoint_xfer_isoc(hwep->ep.desc) && |
| hwreq->req.length > hwep->ep.mult * hwep->ep.maxpacket) { |
| dev_err(hwep->ci->dev, "request length too big for isochronous\n"); |
| return -EMSGSIZE; |
| } |
| |
| /* first nuke then test link, e.g. previous status has not sent */ |
| if (!list_empty(&hwreq->queue)) { |
| dev_err(hwep->ci->dev, "request already in queue\n"); |
| return -EBUSY; |
| } |
| |
| /* push request */ |
| hwreq->req.status = -EINPROGRESS; |
| hwreq->req.actual = 0; |
| |
| retval = _hardware_enqueue(hwep, hwreq); |
| |
| if (retval == -EALREADY) |
| retval = 0; |
| if (!retval) |
| list_add_tail(&hwreq->queue, &hwep->qh.queue); |
| |
| return retval; |
| } |
| |
| /** |
| * isr_get_status_response: get_status request response |
| * @ci: ci struct |
| * @setup: setup request packet |
| * |
| * This function returns an error code |
| */ |
| static int isr_get_status_response(struct ci_hdrc *ci, |
| struct usb_ctrlrequest *setup) |
| __releases(hwep->lock) |
| __acquires(hwep->lock) |
| { |
| struct ci_hw_ep *hwep = ci->ep0in; |
| struct usb_request *req = NULL; |
| gfp_t gfp_flags = GFP_ATOMIC; |
| int dir, num, retval; |
| |
| if (hwep == NULL || setup == NULL) |
| return -EINVAL; |
| |
| spin_unlock(hwep->lock); |
| req = usb_ep_alloc_request(&hwep->ep, gfp_flags); |
| spin_lock(hwep->lock); |
| if (req == NULL) |
| return -ENOMEM; |
| |
| req->complete = isr_get_status_complete; |
| req->length = 2; |
| req->buf = kzalloc(req->length, gfp_flags); |
| if (req->buf == NULL) { |
| retval = -ENOMEM; |
| goto err_free_req; |
| } |
| |
| if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { |
| *(u16 *)req->buf = (ci->remote_wakeup << 1) | |
| ci->gadget.is_selfpowered; |
| } else if ((setup->bRequestType & USB_RECIP_MASK) \ |
| == USB_RECIP_ENDPOINT) { |
| dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? |
| TX : RX; |
| num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK; |
| *(u16 *)req->buf = hw_ep_get_halt(ci, num, dir); |
| } |
| /* else do nothing; reserved for future use */ |
| |
| retval = _ep_queue(&hwep->ep, req, gfp_flags); |
| if (retval) |
| goto err_free_buf; |
| |
| return 0; |
| |
| err_free_buf: |
| kfree(req->buf); |
| err_free_req: |
| spin_unlock(hwep->lock); |
| usb_ep_free_request(&hwep->ep, req); |
| spin_lock(hwep->lock); |
| return retval; |
| } |
| |
| /** |
| * isr_setup_status_complete: setup_status request complete function |
| * @ep: endpoint |
| * @req: request handled |
| * |
| * Caller must release lock. Put the port in test mode if test mode |
| * feature is selected. |
| */ |
| static void |
| isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct ci_hdrc *ci = req->context; |
| unsigned long flags; |
| |
| if (ci->setaddr) { |
| hw_usb_set_address(ci, ci->address); |
| ci->setaddr = false; |
| if (ci->address) |
| usb_gadget_set_state(&ci->gadget, USB_STATE_ADDRESS); |
| } |
| |
| spin_lock_irqsave(&ci->lock, flags); |
| if (ci->test_mode) |
| hw_port_test_set(ci, ci->test_mode); |
| spin_unlock_irqrestore(&ci->lock, flags); |
| } |
| |
| /** |
| * isr_setup_status_phase: queues the status phase of a setup transation |
| * @ci: ci struct |
| * |
| * This function returns an error code |
| */ |
| static int isr_setup_status_phase(struct ci_hdrc *ci) |
| { |
| struct ci_hw_ep *hwep; |
| |
| /* |
| * Unexpected USB controller behavior, caused by bad signal integrity |
| * or ground reference problems, can lead to isr_setup_status_phase |
| * being called with ci->status equal to NULL. |
| * If this situation occurs, you should review your USB hardware design. |
| */ |
| if (WARN_ON_ONCE(!ci->status)) |
| return -EPIPE; |
| |
| hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in; |
| ci->status->context = ci; |
| ci->status->complete = isr_setup_status_complete; |
| |
| return _ep_queue(&hwep->ep, ci->status, GFP_ATOMIC); |
| } |
| |
| /** |
| * isr_tr_complete_low: transaction complete low level handler |
| * @hwep: endpoint |
| * |
| * This function returns an error code |
| * Caller must hold lock |
| */ |
| static int isr_tr_complete_low(struct ci_hw_ep *hwep) |
| __releases(hwep->lock) |
| __acquires(hwep->lock) |
| { |
| struct ci_hw_req *hwreq, *hwreqtemp; |
| struct ci_hw_ep *hweptemp = hwep; |
| int retval = 0; |
| |
| list_for_each_entry_safe(hwreq, hwreqtemp, &hwep->qh.queue, |
| queue) { |
| retval = _hardware_dequeue(hwep, hwreq); |
| if (retval < 0) |
| break; |
| list_del_init(&hwreq->queue); |
| if (hwreq->req.complete != NULL) { |
| spin_unlock(hwep->lock); |
| if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) && |
| hwreq->req.length) |
| hweptemp = hwep->ci->ep0in; |
| usb_gadget_giveback_request(&hweptemp->ep, &hwreq->req); |
| spin_lock(hwep->lock); |
| } |
| } |
| |
| if (retval == -EBUSY) |
| retval = 0; |
| |
| return retval; |
| } |
| |
| static int otg_a_alt_hnp_support(struct ci_hdrc *ci) |
| { |
| dev_warn(&ci->gadget.dev, |
| "connect the device to an alternate port if you want HNP\n"); |
| return isr_setup_status_phase(ci); |
| } |
| |
| /** |
| * isr_setup_packet_handler: setup packet handler |
| * @ci: UDC descriptor |
| * |
| * This function handles setup packet |
| */ |
| static void isr_setup_packet_handler(struct ci_hdrc *ci) |
| __releases(ci->lock) |
| __acquires(ci->lock) |
| { |
| struct ci_hw_ep *hwep = &ci->ci_hw_ep[0]; |
| struct usb_ctrlrequest req; |
| int type, num, dir, err = -EINVAL; |
| u8 tmode = 0; |
| |
| /* |
| * Flush data and handshake transactions of previous |
| * setup packet. |
| */ |
| _ep_nuke(ci->ep0out); |
| _ep_nuke(ci->ep0in); |
| |
| /* read_setup_packet */ |
| do { |
| hw_test_and_set_setup_guard(ci); |
| memcpy(&req, &hwep->qh.ptr->setup, sizeof(req)); |
| } while (!hw_test_and_clear_setup_guard(ci)); |
| |
| type = req.bRequestType; |
| |
| ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX; |
| |
| switch (req.bRequest) { |
| case USB_REQ_CLEAR_FEATURE: |
| if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && |
| le16_to_cpu(req.wValue) == |
| USB_ENDPOINT_HALT) { |
| if (req.wLength != 0) |
| break; |
| num = le16_to_cpu(req.wIndex); |
| dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX; |
| num &= USB_ENDPOINT_NUMBER_MASK; |
| if (dir == TX) |
| num += ci->hw_ep_max / 2; |
| if (!ci->ci_hw_ep[num].wedge) { |
| spin_unlock(&ci->lock); |
| err = usb_ep_clear_halt( |
| &ci->ci_hw_ep[num].ep); |
| spin_lock(&ci->lock); |
| if (err) |
| break; |
| } |
| err = isr_setup_status_phase(ci); |
| } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) && |
| le16_to_cpu(req.wValue) == |
| USB_DEVICE_REMOTE_WAKEUP) { |
| if (req.wLength != 0) |
| break; |
| ci->remote_wakeup = 0; |
| err = isr_setup_status_phase(ci); |
| } else { |
| goto delegate; |
| } |
| break; |
| case USB_REQ_GET_STATUS: |
| if ((type != (USB_DIR_IN|USB_RECIP_DEVICE) || |
| le16_to_cpu(req.wIndex) == OTG_STS_SELECTOR) && |
| type != (USB_DIR_IN|USB_RECIP_ENDPOINT) && |
| type != (USB_DIR_IN|USB_RECIP_INTERFACE)) |
| goto delegate; |
| if (le16_to_cpu(req.wLength) != 2 || |
| le16_to_cpu(req.wValue) != 0) |
| break; |
| err = isr_get_status_response(ci, &req); |
| break; |
| case USB_REQ_SET_ADDRESS: |
| if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) |
| goto delegate; |
| if (le16_to_cpu(req.wLength) != 0 || |
| le16_to_cpu(req.wIndex) != 0) |
| break; |
| ci->address = (u8)le16_to_cpu(req.wValue); |
| ci->setaddr = true; |
| err = isr_setup_status_phase(ci); |
| break; |
| case USB_REQ_SET_FEATURE: |
| if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && |
| le16_to_cpu(req.wValue) == |
| USB_ENDPOINT_HALT) { |
| if (req.wLength != 0) |
| break; |
| num = le16_to_cpu(req.wIndex); |
| dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX; |
| num &= USB_ENDPOINT_NUMBER_MASK; |
| if (dir == TX) |
| num += ci->hw_ep_max / 2; |
| |
| spin_unlock(&ci->lock); |
| err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false); |
| spin_lock(&ci->lock); |
| if (!err) |
| isr_setup_status_phase(ci); |
| } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) { |
| if (req.wLength != 0) |
| break; |
| switch (le16_to_cpu(req.wValue)) { |
| case USB_DEVICE_REMOTE_WAKEUP: |
| ci->remote_wakeup = 1; |
| err = isr_setup_status_phase(ci); |
| break; |
| case USB_DEVICE_TEST_MODE: |
| tmode = le16_to_cpu(req.wIndex) >> 8; |
| switch (tmode) { |
| case TEST_J: |
| case TEST_K: |
| case TEST_SE0_NAK: |
| case TEST_PACKET: |
| case TEST_FORCE_EN: |
| ci->test_mode = tmode; |
| err = isr_setup_status_phase( |
| ci); |
| break; |
| default: |
| break; |
| } |
| break; |
| case USB_DEVICE_B_HNP_ENABLE: |
| if (ci_otg_is_fsm_mode(ci)) { |
| ci->gadget.b_hnp_enable = 1; |
| err = isr_setup_status_phase( |
| ci); |
| } |
| break; |
| case USB_DEVICE_A_ALT_HNP_SUPPORT: |
| if (ci_otg_is_fsm_mode(ci)) |
| err = otg_a_alt_hnp_support(ci); |
| break; |
| case USB_DEVICE_A_HNP_SUPPORT: |
| if (ci_otg_is_fsm_mode(ci)) { |
| ci->gadget.a_hnp_support = 1; |
| err = isr_setup_status_phase( |
| ci); |
| } |
| break; |
| default: |
| goto delegate; |
| } |
| } else { |
| goto delegate; |
| } |
| break; |
| default: |
| delegate: |
| if (req.wLength == 0) /* no data phase */ |
| ci->ep0_dir = TX; |
| |
| spin_unlock(&ci->lock); |
| err = ci->driver->setup(&ci->gadget, &req); |
| spin_lock(&ci->lock); |
| break; |
| } |
| |
| if (err < 0) { |
| spin_unlock(&ci->lock); |
| if (_ep_set_halt(&hwep->ep, 1, false)) |
| dev_err(ci->dev, "error: _ep_set_halt\n"); |
| spin_lock(&ci->lock); |
| } |
| } |
| |
| /** |
| * isr_tr_complete_handler: transaction complete interrupt handler |
| * @ci: UDC descriptor |
| * |
| * This function handles traffic events |
| */ |
| static void isr_tr_complete_handler(struct ci_hdrc *ci) |
| __releases(ci->lock) |
| __acquires(ci->lock) |
| { |
| unsigned i; |
| int err; |
| |
| for (i = 0; i < ci->hw_ep_max; i++) { |
| struct ci_hw_ep *hwep = &ci->ci_hw_ep[i]; |
| |
| if (hwep->ep.desc == NULL) |
| continue; /* not configured */ |
| |
| if (hw_test_and_clear_complete(ci, i)) { |
| err = isr_tr_complete_low(hwep); |
| if (hwep->type == USB_ENDPOINT_XFER_CONTROL) { |
| if (err > 0) /* needs status phase */ |
| err = isr_setup_status_phase(ci); |
| if (err < 0) { |
| spin_unlock(&ci->lock); |
| if (_ep_set_halt(&hwep->ep, 1, false)) |
| dev_err(ci->dev, |
| "error: _ep_set_halt\n"); |
| spin_lock(&ci->lock); |
| } |
| } |
| } |
| |
| /* Only handle setup packet below */ |
| if (i == 0 && |
| hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0))) |
| isr_setup_packet_handler(ci); |
| } |
| } |
| |
| /****************************************************************************** |
| * ENDPT block |
| *****************************************************************************/ |
| /** |
| * ep_enable: configure endpoint, making it usable |
| * |
| * Check usb_ep_enable() at "usb_gadget.h" for details |
| */ |
| static int ep_enable(struct usb_ep *ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); |
| int retval = 0; |
| unsigned long flags; |
| u32 cap = 0; |
| |
| if (ep == NULL || desc == NULL) |
| return -EINVAL; |
| |
| spin_lock_irqsave(hwep->lock, flags); |
| |
| /* only internal SW should enable ctrl endpts */ |
| |
| if (!list_empty(&hwep->qh.queue)) { |
| dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n"); |
| spin_unlock_irqrestore(hwep->lock, flags); |
| return -EBUSY; |
| } |
| |
| hwep->ep.desc = desc; |
| |
| hwep->dir = usb_endpoint_dir_in(desc) ? TX : RX; |
| hwep->num = usb_endpoint_num(desc); |
| hwep->type = usb_endpoint_type(desc); |
| |
| hwep->ep.maxpacket = usb_endpoint_maxp(desc); |
| hwep->ep.mult = usb_endpoint_maxp_mult(desc); |
| |
| if (hwep->type == USB_ENDPOINT_XFER_CONTROL) |
| cap |= QH_IOS; |
| |
| cap |= QH_ZLT; |
| cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT; |
| /* |
| * For ISO-TX, we set mult at QH as the largest value, and use |
| * MultO at TD as real mult value. |
| */ |
| if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) |
| cap |= 3 << __ffs(QH_MULT); |
| |
| hwep->qh.ptr->cap = cpu_to_le32(cap); |
| |
| hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE); /* needed? */ |
| |
| if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) { |
| dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n"); |
| retval = -EINVAL; |
| } |
| |
| /* |
| * Enable endpoints in the HW other than ep0 as ep0 |
| * is always enabled |
| */ |
| if (hwep->num) |
| retval |= hw_ep_enable(hwep->ci, hwep->num, hwep->dir, |
| hwep->type); |
| |
| spin_unlock_irqrestore(hwep->lock, flags); |
| return retval; |
| } |
| |
| /** |
| * ep_disable: endpoint is no longer usable |
| * |
| * Check usb_ep_disable() at "usb_gadget.h" for details |
| */ |
| static int ep_disable(struct usb_ep *ep) |
| { |
| struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); |
| int direction, retval = 0; |
| unsigned long flags; |
| |
| if (ep == NULL) |
| return -EINVAL; |
| else if (hwep->ep.desc == NULL) |
| return -EBUSY; |
| |
| spin_lock_irqsave(hwep->lock, flags); |
| if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) { |
| spin_unlock_irqrestore(hwep->lock, flags); |
| return 0; |
| } |
| |
| /* only internal SW should disable ctrl endpts */ |
| |
| direction = hwep->dir; |
| do { |
| retval |= _ep_nuke(hwep); |
| retval |= hw_ep_disable(hwep->ci, hwep->num, hwep->dir); |
| |
| if (hwep->type == USB_ENDPOINT_XFER_CONTROL) |
| hwep->dir = (hwep->dir == TX) ? RX : TX; |
| |
| } while (hwep->dir != direction); |
| |
| hwep->ep.desc = NULL; |
| |
| spin_unlock_irqrestore(hwep->lock, flags); |
| return retval; |
| } |
| |
| /** |
| * ep_alloc_request: allocate a request object to use with this endpoint |
| * |
| * Check usb_ep_alloc_request() at "usb_gadget.h" for details |
| */ |
| static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) |
| { |
| struct ci_hw_req *hwreq = NULL; |
| |
| if (ep == NULL) |
| return NULL; |
| |
| hwreq = kzalloc(sizeof(struct ci_hw_req), gfp_flags); |
| if (hwreq != NULL) { |
| INIT_LIST_HEAD(&hwreq->queue); |
| INIT_LIST_HEAD(&hwreq->tds); |
| } |
| |
| return (hwreq == NULL) ? NULL : &hwreq->req; |
| } |
| |
| /** |
| * ep_free_request: frees a request object |
| * |
| * Check usb_ep_free_request() at "usb_gadget.h" for details |
| */ |
| static void ep_free_request(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); |
| struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req); |
| struct td_node *node, *tmpnode; |
| unsigned long flags; |
| |
| if (ep == NULL || req == NULL) { |
| return; |
| } else if (!list_empty(&hwreq->queue)) { |
| dev_err(hwep->ci->dev, "freeing queued request\n"); |
| return; |
| } |
| |
| spin_lock_irqsave(hwep->lock, flags); |
| |
| list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { |
| dma_pool_free(hwep->td_pool, node->ptr, node->dma); |
| list_del_init(&node->td); |
| node->ptr = NULL; |
| kfree(node); |
| } |
| |
| kfree(hwreq); |
| |
| spin_unlock_irqrestore(hwep->lock, flags); |
| } |
| |
| /** |
| * ep_queue: queues (submits) an I/O request to an endpoint |
| * |
| * Check usb_ep_queue()* at usb_gadget.h" for details |
| */ |
| static int ep_queue(struct usb_ep *ep, struct usb_request *req, |
| gfp_t __maybe_unused gfp_flags) |
| { |
| struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); |
| int retval = 0; |
| unsigned long flags; |
| |
| if (ep == NULL || req == NULL || hwep->ep.desc == NULL) |
| return -EINVAL; |
| |
| spin_lock_irqsave(hwep->lock, flags); |
| if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) { |
| spin_unlock_irqrestore(hwep->lock, flags); |
| return 0; |
| } |
| retval = _ep_queue(ep, req, gfp_flags); |
| spin_unlock_irqrestore(hwep->lock, flags); |
| return retval; |
| } |
| |
| /** |
| * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint |
| * |
| * Check usb_ep_dequeue() at "usb_gadget.h" for details |
| */ |
| static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); |
| struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req); |
| unsigned long flags; |
| struct td_node *node, *tmpnode; |
| |
| if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY || |
| hwep->ep.desc == NULL || list_empty(&hwreq->queue) || |
| list_empty(&hwep->qh.queue)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(hwep->lock, flags); |
| if (hwep->ci->gadget.speed != USB_SPEED_UNKNOWN) |
| hw_ep_flush(hwep->ci, hwep->num, hwep->dir); |
| |
| list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { |
| dma_pool_free(hwep->td_pool, node->ptr, node->dma); |
| list_del(&node->td); |
| kfree(node); |
| } |
| |
| /* pop request */ |
| list_del_init(&hwreq->queue); |
| |
| usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir); |
| |
| req->status = -ECONNRESET; |
| |
| if (hwreq->req.complete != NULL) { |
| spin_unlock(hwep->lock); |
| usb_gadget_giveback_request(&hwep->ep, &hwreq->req); |
| spin_lock(hwep->lock); |
| } |
| |
| spin_unlock_irqrestore(hwep->lock, flags); |
| return 0; |
| } |
| |
| /** |
| * ep_set_halt: sets the endpoint halt feature |
| * |
| * Check usb_ep_set_halt() at "usb_gadget.h" for details |
| */ |
| static int ep_set_halt(struct usb_ep *ep, int value) |
| { |
| return _ep_set_halt(ep, value, true); |
| } |
| |
| /** |
| * ep_set_wedge: sets the halt feature and ignores clear requests |
| * |
| * Check usb_ep_set_wedge() at "usb_gadget.h" for details |
| */ |
| static int ep_set_wedge(struct usb_ep *ep) |
| { |
| struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); |
| unsigned long flags; |
| |
| if (ep == NULL || hwep->ep.desc == NULL) |
| return -EINVAL; |
| |
| spin_lock_irqsave(hwep->lock, flags); |
| hwep->wedge = 1; |
| spin_unlock_irqrestore(hwep->lock, flags); |
| |
| return usb_ep_set_halt(ep); |
| } |
| |
| /** |
| * ep_fifo_flush: flushes contents of a fifo |
| * |
| * Check usb_ep_fifo_flush() at "usb_gadget.h" for details |
| */ |
| static void ep_fifo_flush(struct usb_ep *ep) |
| { |
| struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); |
| unsigned long flags; |
| |
| if (ep == NULL) { |
| dev_err(hwep->ci->dev, "%02X: -EINVAL\n", _usb_addr(hwep)); |
| return; |
| } |
| |
| spin_lock_irqsave(hwep->lock, flags); |
| if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) { |
| spin_unlock_irqrestore(hwep->lock, flags); |
| return; |
| } |
| |
| hw_ep_flush(hwep->ci, hwep->num, hwep->dir); |
| |
| spin_unlock_irqrestore(hwep->lock, flags); |
| } |
| |
| /** |
| * Endpoint-specific part of the API to the USB controller hardware |
| * Check "usb_gadget.h" for details |
| */ |
| static const struct usb_ep_ops usb_ep_ops = { |
| .enable = ep_enable, |
| .disable = ep_disable, |
| .alloc_request = ep_alloc_request, |
| .free_request = ep_free_request, |
| .queue = ep_queue, |
| .dequeue = ep_dequeue, |
| .set_halt = ep_set_halt, |
| .set_wedge = ep_set_wedge, |
| .fifo_flush = ep_fifo_flush, |
| }; |
| |
| /****************************************************************************** |
| * GADGET block |
| *****************************************************************************/ |
| static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active) |
| { |
| struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); |
| unsigned long flags; |
| int gadget_ready = 0; |
| |
| spin_lock_irqsave(&ci->lock, flags); |
| ci->vbus_active = is_active; |
| if (ci->driver) |
| gadget_ready = 1; |
| spin_unlock_irqrestore(&ci->lock, flags); |
| |
| if (gadget_ready) { |
| if (is_active) { |
| pm_runtime_get_sync(&_gadget->dev); |
| hw_device_reset(ci); |
| hw_device_state(ci, ci->ep0out->qh.dma); |
| usb_gadget_set_state(_gadget, USB_STATE_POWERED); |
| usb_udc_vbus_handler(_gadget, true); |
| } else { |
| usb_udc_vbus_handler(_gadget, false); |
| if (ci->driver) |
| ci->driver->disconnect(&ci->gadget); |
| hw_device_state(ci, 0); |
| if (ci->platdata->notify_event) |
| ci->platdata->notify_event(ci, |
| CI_HDRC_CONTROLLER_STOPPED_EVENT); |
| _gadget_stop_activity(&ci->gadget); |
| pm_runtime_put_sync(&_gadget->dev); |
| usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int ci_udc_wakeup(struct usb_gadget *_gadget) |
| { |
| struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); |
| unsigned long flags; |
| int ret = 0; |
| |
| spin_lock_irqsave(&ci->lock, flags); |
| if (ci->gadget.speed == USB_SPEED_UNKNOWN) { |
| spin_unlock_irqrestore(&ci->lock, flags); |
| return 0; |
| } |
| if (!ci->remote_wakeup) { |
| ret = -EOPNOTSUPP; |
| goto out; |
| } |
| if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); |
| out: |
| spin_unlock_irqrestore(&ci->lock, flags); |
| return ret; |
| } |
| |
| static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma) |
| { |
| struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); |
| |
| if (ci->usb_phy) |
| return usb_phy_set_power(ci->usb_phy, ma); |
| return -ENOTSUPP; |
| } |
| |
| static int ci_udc_selfpowered(struct usb_gadget *_gadget, int is_on) |
| { |
| struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); |
| struct ci_hw_ep *hwep = ci->ep0in; |
| unsigned long flags; |
| |
| spin_lock_irqsave(hwep->lock, flags); |
| _gadget->is_selfpowered = (is_on != 0); |
| spin_unlock_irqrestore(hwep->lock, flags); |
| |
| return 0; |
| } |
| |
| /* Change Data+ pullup status |
| * this func is used by usb_gadget_connect/disconnet |
| */ |
| static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on) |
| { |
| struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); |
| |
| /* |
| * Data+ pullup controlled by OTG state machine in OTG fsm mode; |
| * and don't touch Data+ in host mode for dual role config. |
| */ |
| if (ci_otg_is_fsm_mode(ci) || ci->role == CI_ROLE_HOST) |
| return 0; |
| |
| pm_runtime_get_sync(&ci->gadget.dev); |
| if (is_on) |
| hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); |
| else |
| hw_write(ci, OP_USBCMD, USBCMD_RS, 0); |
| pm_runtime_put_sync(&ci->gadget.dev); |
| |
| return 0; |
| } |
| |
| static int ci_udc_start(struct usb_gadget *gadget, |
| struct usb_gadget_driver *driver); |
| static int ci_udc_stop(struct usb_gadget *gadget); |
| |
| /* Match ISOC IN from the highest endpoint */ |
| static struct usb_ep *ci_udc_match_ep(struct usb_gadget *gadget, |
| struct usb_endpoint_descriptor *desc, |
| struct usb_ss_ep_comp_descriptor *comp_desc) |
| { |
| struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); |
| struct usb_ep *ep; |
| |
| if (usb_endpoint_xfer_isoc(desc) && usb_endpoint_dir_in(desc)) { |
| list_for_each_entry_reverse(ep, &ci->gadget.ep_list, ep_list) { |
| if (ep->caps.dir_in && !ep->claimed) |
| return ep; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * Device operations part of the API to the USB controller hardware, |
| * which don't involve endpoints (or i/o) |
| * Check "usb_gadget.h" for details |
| */ |
| static const struct usb_gadget_ops usb_gadget_ops = { |
| .vbus_session = ci_udc_vbus_session, |
| .wakeup = ci_udc_wakeup, |
| .set_selfpowered = ci_udc_selfpowered, |
| .pullup = ci_udc_pullup, |
| .vbus_draw = ci_udc_vbus_draw, |
| .udc_start = ci_udc_start, |
| .udc_stop = ci_udc_stop, |
| .match_ep = ci_udc_match_ep, |
| }; |
| |
| static int init_eps(struct ci_hdrc *ci) |
| { |
| int retval = 0, i, j; |
| |
| for (i = 0; i < ci->hw_ep_max/2; i++) |
| for (j = RX; j <= TX; j++) { |
| int k = i + j * ci->hw_ep_max/2; |
| struct ci_hw_ep *hwep = &ci->ci_hw_ep[k]; |
| |
| scnprintf(hwep->name, sizeof(hwep->name), "ep%i%s", i, |
| (j == TX) ? "in" : "out"); |
| |
| hwep->ci = ci; |
| hwep->lock = &ci->lock; |
| hwep->td_pool = ci->td_pool; |
| |
| hwep->ep.name = hwep->name; |
| hwep->ep.ops = &usb_ep_ops; |
| |
| if (i == 0) { |
| hwep->ep.caps.type_control = true; |
| } else { |
| hwep->ep.caps.type_iso = true; |
| hwep->ep.caps.type_bulk = true; |
| hwep->ep.caps.type_int = true; |
| } |
| |
| if (j == TX) |
| hwep->ep.caps.dir_in = true; |
| else |
| hwep->ep.caps.dir_out = true; |
| |
| /* |
| * for ep0: maxP defined in desc, for other |
| * eps, maxP is set by epautoconfig() called |
| * by gadget layer |
| */ |
| usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0); |
| |
| INIT_LIST_HEAD(&hwep->qh.queue); |
| hwep->qh.ptr = dma_pool_zalloc(ci->qh_pool, GFP_KERNEL, |
| &hwep->qh.dma); |
| if (hwep->qh.ptr == NULL) |
| retval = -ENOMEM; |
| |
| /* |
| * set up shorthands for ep0 out and in endpoints, |
| * don't add to gadget's ep_list |
| */ |
| if (i == 0) { |
| if (j == RX) |
| ci->ep0out = hwep; |
| else |
| ci->ep0in = hwep; |
| |
| usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX); |
| continue; |
| } |
| |
| list_add_tail(&hwep->ep.ep_list, &ci->gadget.ep_list); |
| } |
| |
| return retval; |
| } |
| |
| static void destroy_eps(struct ci_hdrc *ci) |
| { |
| int i; |
| |
| for (i = 0; i < ci->hw_ep_max; i++) { |
| struct ci_hw_ep *hwep = &ci->ci_hw_ep[i]; |
| |
| if (hwep->pending_td) |
| free_pending_td(hwep); |
| dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma); |
| } |
| } |
| |
| /** |
| * ci_udc_start: register a gadget driver |
| * @gadget: our gadget |
| * @driver: the driver being registered |
| * |
| * Interrupts are enabled here. |
| */ |
| static int ci_udc_start(struct usb_gadget *gadget, |
| struct usb_gadget_driver *driver) |
| { |
| struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); |
| int retval = -ENOMEM; |
| |
| if (driver->disconnect == NULL) |
| return -EINVAL; |
| |
| |
| ci->ep0out->ep.desc = &ctrl_endpt_out_desc; |
| retval = usb_ep_enable(&ci->ep0out->ep); |
| if (retval) |
| return retval; |
| |
| ci->ep0in->ep.desc = &ctrl_endpt_in_desc; |
| retval = usb_ep_enable(&ci->ep0in->ep); |
| if (retval) |
| return retval; |
| |
| ci->driver = driver; |
| |
| /* Start otg fsm for B-device */ |
| if (ci_otg_is_fsm_mode(ci) && ci->fsm.id) { |
| ci_hdrc_otg_fsm_start(ci); |
| return retval; |
| } |
| |
| pm_runtime_get_sync(&ci->gadget.dev); |
| if (ci->vbus_active) { |
| hw_device_reset(ci); |
| } else { |
| usb_udc_vbus_handler(&ci->gadget, false); |
| pm_runtime_put_sync(&ci->gadget.dev); |
| return retval; |
| } |
| |
| retval = hw_device_state(ci, ci->ep0out->qh.dma); |
| if (retval) |
| pm_runtime_put_sync(&ci->gadget.dev); |
| |
| return retval; |
| } |
| |
| static void ci_udc_stop_for_otg_fsm(struct ci_hdrc *ci) |
| { |
| if (!ci_otg_is_fsm_mode(ci)) |
| return; |
| |
| mutex_lock(&ci->fsm.lock); |
| if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) { |
| ci->fsm.a_bidl_adis_tmout = 1; |
| ci_hdrc_otg_fsm_start(ci); |
| } else if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) { |
| ci->fsm.protocol = PROTO_UNDEF; |
| ci->fsm.otg->state = OTG_STATE_UNDEFINED; |
| } |
| mutex_unlock(&ci->fsm.lock); |
| } |
| |
| /** |
| * ci_udc_stop: unregister a gadget driver |
| */ |
| static int ci_udc_stop(struct usb_gadget *gadget) |
| { |
| struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ci->lock, flags); |
| |
| if (ci->vbus_active) { |
| hw_device_state(ci, 0); |
| spin_unlock_irqrestore(&ci->lock, flags); |
| if (ci->platdata->notify_event) |
| ci->platdata->notify_event(ci, |
| CI_HDRC_CONTROLLER_STOPPED_EVENT); |
| _gadget_stop_activity(&ci->gadget); |
| spin_lock_irqsave(&ci->lock, flags); |
| pm_runtime_put(&ci->gadget.dev); |
| } |
| |
| ci->driver = NULL; |
| spin_unlock_irqrestore(&ci->lock, flags); |
| |
| ci_udc_stop_for_otg_fsm(ci); |
| return 0; |
| } |
| |
| /****************************************************************************** |
| * BUS block |
| *****************************************************************************/ |
| /** |
| * udc_irq: ci interrupt handler |
| * |
| * This function returns IRQ_HANDLED if the IRQ has been handled |
| * It locks access to registers |
| */ |
| static irqreturn_t udc_irq(struct ci_hdrc *ci) |
| { |
| irqreturn_t retval; |
| u32 intr; |
| |
| if (ci == NULL) |
| return IRQ_HANDLED; |
| |
| spin_lock(&ci->lock); |
| |
| if (ci->platdata->flags & CI_HDRC_REGS_SHARED) { |
| if (hw_read(ci, OP_USBMODE, USBMODE_CM) != |
| USBMODE_CM_DC) { |
| spin_unlock(&ci->lock); |
| return IRQ_NONE; |
| } |
| } |
| intr = hw_test_and_clear_intr_active(ci); |
| |
| if (intr) { |
| /* order defines priority - do NOT change it */ |
| if (USBi_URI & intr) |
| isr_reset_handler(ci); |
| |
| if (USBi_PCI & intr) { |
| ci->gadget.speed = hw_port_is_high_speed(ci) ? |
| USB_SPEED_HIGH : USB_SPEED_FULL; |
| if (ci->suspended) { |
| if (ci->driver->resume) { |
| spin_unlock(&ci->lock); |
| ci->driver->resume(&ci->gadget); |
| spin_lock(&ci->lock); |
| } |
| ci->suspended = 0; |
| usb_gadget_set_state(&ci->gadget, |
| ci->resume_state); |
| } |
| } |
| |
| if (USBi_UI & intr) |
| isr_tr_complete_handler(ci); |
| |
| if ((USBi_SLI & intr) && !(ci->suspended)) { |
| ci->suspended = 1; |
| ci->resume_state = ci->gadget.state; |
| if (ci->gadget.speed != USB_SPEED_UNKNOWN && |
| ci->driver->suspend) { |
| spin_unlock(&ci->lock); |
| ci->driver->suspend(&ci->gadget); |
| spin_lock(&ci->lock); |
| } |
| usb_gadget_set_state(&ci->gadget, |
| USB_STATE_SUSPENDED); |
| } |
| retval = IRQ_HANDLED; |
| } else { |
| retval = IRQ_NONE; |
| } |
| spin_unlock(&ci->lock); |
| |
| return retval; |
| } |
| |
| /** |
| * udc_start: initialize gadget role |
| * @ci: chipidea controller |
| */ |
| static int udc_start(struct ci_hdrc *ci) |
| { |
| struct device *dev = ci->dev; |
| struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps; |
| int retval = 0; |
| |
| ci->gadget.ops = &usb_gadget_ops; |
| ci->gadget.speed = USB_SPEED_UNKNOWN; |
| ci->gadget.max_speed = USB_SPEED_HIGH; |
| ci->gadget.name = ci->platdata->name; |
| ci->gadget.otg_caps = otg_caps; |
| |
| if (ci->platdata->flags & CI_HDRC_REQUIRES_ALIGNED_DMA) |
| ci->gadget.quirk_avoids_skb_reserve = 1; |
| |
| if (ci->is_otg && (otg_caps->hnp_support || otg_caps->srp_support || |
| otg_caps->adp_support)) |
| ci->gadget.is_otg = 1; |
| |
| INIT_LIST_HEAD(&ci->gadget.ep_list); |
| |
| /* alloc resources */ |
| ci->qh_pool = dma_pool_create("ci_hw_qh", dev->parent, |
| sizeof(struct ci_hw_qh), |
| 64, CI_HDRC_PAGE_SIZE); |
| if (ci->qh_pool == NULL) |
| return -ENOMEM; |
| |
| ci->td_pool = dma_pool_create("ci_hw_td", dev->parent, |
| sizeof(struct ci_hw_td), |
| 64, CI_HDRC_PAGE_SIZE); |
| if (ci->td_pool == NULL) { |
| retval = -ENOMEM; |
| goto free_qh_pool; |
| } |
| |
| retval = init_eps(ci); |
| if (retval) |
| goto free_pools; |
| |
| ci->gadget.ep0 = &ci->ep0in->ep; |
| |
| retval = usb_add_gadget_udc(dev, &ci->gadget); |
| if (retval) |
| goto destroy_eps; |
| |
| pm_runtime_no_callbacks(&ci->gadget.dev); |
| pm_runtime_enable(&ci->gadget.dev); |
| |
| return retval; |
| |
| destroy_eps: |
| destroy_eps(ci); |
| free_pools: |
| dma_pool_destroy(ci->td_pool); |
| free_qh_pool: |
| dma_pool_destroy(ci->qh_pool); |
| return retval; |
| } |
| |
| /** |
| * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC |
| * |
| * No interrupts active, the IRQ has been released |
| */ |
| void ci_hdrc_gadget_destroy(struct ci_hdrc *ci) |
| { |
| if (!ci->roles[CI_ROLE_GADGET]) |
| return; |
| |
| usb_del_gadget_udc(&ci->gadget); |
| |
| destroy_eps(ci); |
| |
| dma_pool_destroy(ci->td_pool); |
| dma_pool_destroy(ci->qh_pool); |
| } |
| |
| static int udc_id_switch_for_device(struct ci_hdrc *ci) |
| { |
| if (ci->is_otg) |
| /* Clear and enable BSV irq */ |
| hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE, |
| OTGSC_BSVIS | OTGSC_BSVIE); |
| |
| return 0; |
| } |
| |
| static void udc_id_switch_for_host(struct ci_hdrc *ci) |
| { |
| /* |
| * host doesn't care B_SESSION_VALID event |
| * so clear and disbale BSV irq |
| */ |
| if (ci->is_otg) |
| hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS); |
| |
| ci->vbus_active = 0; |
| } |
| |
| /** |
| * ci_hdrc_gadget_init - initialize device related bits |
| * ci: the controller |
| * |
| * This function initializes the gadget, if the device is "device capable". |
| */ |
| int ci_hdrc_gadget_init(struct ci_hdrc *ci) |
| { |
| struct ci_role_driver *rdrv; |
| int ret; |
| |
| if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC)) |
| return -ENXIO; |
| |
| rdrv = devm_kzalloc(ci->dev, sizeof(*rdrv), GFP_KERNEL); |
| if (!rdrv) |
| return -ENOMEM; |
| |
| rdrv->start = udc_id_switch_for_device; |
| rdrv->stop = udc_id_switch_for_host; |
| rdrv->irq = udc_irq; |
| rdrv->name = "gadget"; |
| |
| ret = udc_start(ci); |
| if (!ret) |
| ci->roles[CI_ROLE_GADGET] = rdrv; |
| |
| return ret; |
| } |