arch/x86/kernel/cpu/intel.c - LeafOS-Devices/android_kernel_realme_mt6785 - Gitiles

 #include <linux/init.h>
 #include <linux/kernel.h>

 #include <linux/string.h>
 #include <linux/bitops.h>
 #include <linux/smp.h>
 #include <linux/thread_info.h>
 #include <linux/module.h>

 #include <asm/processor.h>
 #include <asm/pgtable.h>
 #include <asm/msr.h>
 #include <asm/uaccess.h>
 #include <asm/ds.h>
 #include <asm/bugs.h>

 #ifdef CONFIG_X86_64
 #include <asm/topology.h>
 #include <asm/numa_64.h>
 #endif

 #include "cpu.h"

 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
 #endif

 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 {
 	/* Unmask CPUID levels if masked: */
 	if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
 		u64 misc_enable;

 		rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);

 		if (misc_enable & MSR_IA32_MISC_ENABLE_LIMIT_CPUID) {
 			misc_enable &= ~MSR_IA32_MISC_ENABLE_LIMIT_CPUID;
 			wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
 			c->cpuid_level = cpuid_eax(0);
 		}
 	}

 	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
 		(c->x86 == 0x6 && c->x86_model >= 0x0e))
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);

 #ifdef CONFIG_X86_64
 	set_cpu_cap(c, X86_FEATURE_SYSENTER32);
 #else
 	/* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
 	if (c->x86 == 15 && c->x86_cache_alignment == 64)
 		c->x86_cache_alignment = 128;
 #endif

 	/*
 	 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
 	 * with P/T states and does not stop in deep C-states
 	 */
 	if (c->x86_power & (1 << 8)) {
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 		set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
 	}

 	/*
 	 * There is a known erratum on Pentium III and Core Solo
 	 * and Core Duo CPUs.
 	 * " Page with PAT set to WC while associated MTRR is UC
 	 *   may consolidate to UC "
 	 * Because of this erratum, it is better to stick with
 	 * setting WC in MTRR rather than using PAT on these CPUs.
 	 *
 	 * Enable PAT WC only on P4, Core 2 or later CPUs.
 	 */
 	if (c->x86 == 6 && c->x86_model < 15)
 		clear_cpu_cap(c, X86_FEATURE_PAT);
 }

 #ifdef CONFIG_X86_32
 /*
  *	Early probe support logic for ppro memory erratum #50
  *
  *	This is called before we do cpu ident work
  */

 int __cpuinit ppro_with_ram_bug(void)
 {
 	/* Uses data from early_cpu_detect now */
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
 	    boot_cpu_data.x86 == 6 &&
 	    boot_cpu_data.x86_model == 1 &&
 	    boot_cpu_data.x86_mask < 8) {
 		printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
 		return 1;
 	}
 	return 0;
 }

 #ifdef CONFIG_X86_F00F_BUG
 static void __cpuinit trap_init_f00f_bug(void)
 {
 	__set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO);

 	/*
 	 * Update the IDT descriptor and reload the IDT so that
 	 * it uses the read-only mapped virtual address.
 	 */
 	idt_descr.address = fix_to_virt(FIX_F00F_IDT);
 	load_idt(&idt_descr);
 }
 #endif

 static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
 {
 	unsigned long lo, hi;

 #ifdef CONFIG_X86_F00F_BUG
 	/*
 	 * All current models of Pentium and Pentium with MMX technology CPUs
 	 * have the F0 0F bug, which lets nonprivileged users lock up the system.
 	 * Note that the workaround only should be initialized once...
 	 */
 	c->f00f_bug = 0;
 	if (!paravirt_enabled() && c->x86 == 5) {
 		static int f00f_workaround_enabled;

 		c->f00f_bug = 1;
 		if (!f00f_workaround_enabled) {
 			trap_init_f00f_bug();
 			printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
 			f00f_workaround_enabled = 1;
 		}
 	}
 #endif

 	/*
 	 * SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until
 	 * model 3 mask 3
 	 */
 	if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
 		clear_cpu_cap(c, X86_FEATURE_SEP);

 	/*
 	 * P4 Xeon errata 037 workaround.
 	 * Hardware prefetcher may cause stale data to be loaded into the cache.
 	 */
 	if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
 		rdmsr(MSR_IA32_MISC_ENABLE, lo, hi);
 		if ((lo & MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE) == 0) {
 			printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
 			printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
 			lo |= MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE;
 			wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
 		}
 	}

 	/*
 	 * See if we have a good local APIC by checking for buggy Pentia,
 	 * i.e. all B steppings and the C2 stepping of P54C when using their
 	 * integrated APIC (see 11AP erratum in "Pentium Processor
 	 * Specification Update").
 	 */
 	if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
 	    (c->x86_mask < 0x6 || c->x86_mask == 0xb))
 		set_cpu_cap(c, X86_FEATURE_11AP);


 #ifdef CONFIG_X86_INTEL_USERCOPY
 	/*
 	 * Set up the preferred alignment for movsl bulk memory moves
 	 */
 	switch (c->x86) {
 	case 4:		/* 486: untested */
 		break;
 	case 5:		/* Old Pentia: untested */
 		break;
 	case 6:		/* PII/PIII only like movsl with 8-byte alignment */
 		movsl_mask.mask = 7;
 		break;
 	case 15:	/* P4 is OK down to 8-byte alignment */
 		movsl_mask.mask = 7;
 		break;
 	}
 #endif

 #ifdef CONFIG_X86_NUMAQ
 	numaq_tsc_disable();
 #endif
 }
 #else
 static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
 {
 }
 #endif

 static void __cpuinit srat_detect_node(void)
 {
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 	unsigned node;
 	int cpu = smp_processor_id();
 	int apicid = hard_smp_processor_id();

 	/* Don't do the funky fallback heuristics the AMD version employs
 	   for now. */
 	node = apicid_to_node[apicid];
 	if (node == NUMA_NO_NODE || !node_online(node))
 		node = first_node(node_online_map);
 	numa_set_node(cpu, node);

 	printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
 #endif
 }

 /*
  * find out the number of processor cores on the die
  */
 static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
 {
 	unsigned int eax, ebx, ecx, edx;

 	if (c->cpuid_level < 4)
 		return 1;

 	/* Intel has a non-standard dependency on %ecx for this CPUID level. */
 	cpuid_count(4, 0, &eax, &ebx, &ecx, &edx);
 	if (eax & 0x1f)
 		return ((eax >> 26) + 1);
 	else
 		return 1;
 }

 static void __cpuinit detect_vmx_virtcap(struct cpuinfo_x86 *c)
 {
 	/* Intel VMX MSR indicated features */
 #define X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW	0x00200000
 #define X86_VMX_FEATURE_PROC_CTLS_VNMI		0x00400000
 #define X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS	0x80000000
 #define X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC	0x00000001
 #define X86_VMX_FEATURE_PROC_CTLS2_EPT		0x00000002
 #define X86_VMX_FEATURE_PROC_CTLS2_VPID		0x00000020

 	u32 vmx_msr_low, vmx_msr_high, msr_ctl, msr_ctl2;

 	clear_cpu_cap(c, X86_FEATURE_TPR_SHADOW);
 	clear_cpu_cap(c, X86_FEATURE_VNMI);
 	clear_cpu_cap(c, X86_FEATURE_FLEXPRIORITY);
 	clear_cpu_cap(c, X86_FEATURE_EPT);
 	clear_cpu_cap(c, X86_FEATURE_VPID);

 	rdmsr(MSR_IA32_VMX_PROCBASED_CTLS, vmx_msr_low, vmx_msr_high);
 	msr_ctl = vmx_msr_high | vmx_msr_low;
 	if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW)
 		set_cpu_cap(c, X86_FEATURE_TPR_SHADOW);
 	if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_VNMI)
 		set_cpu_cap(c, X86_FEATURE_VNMI);
 	if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS) {
 		rdmsr(MSR_IA32_VMX_PROCBASED_CTLS2,
 		      vmx_msr_low, vmx_msr_high);
 		msr_ctl2 = vmx_msr_high | vmx_msr_low;
 		if ((msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC) &&
 		    (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW))
 			set_cpu_cap(c, X86_FEATURE_FLEXPRIORITY);
 		if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_EPT)
 			set_cpu_cap(c, X86_FEATURE_EPT);
 		if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VPID)
 			set_cpu_cap(c, X86_FEATURE_VPID);
 	}
 }

 static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 {
 	unsigned int l2 = 0;

 	early_init_intel(c);

 	intel_workarounds(c);

 	/*
 	 * Detect the extended topology information if available. This
 	 * will reinitialise the initial_apicid which will be used
 	 * in init_intel_cacheinfo()
 	 */
 	detect_extended_topology(c);

 	l2 = init_intel_cacheinfo(c);
 	if (c->cpuid_level > 9) {
 		unsigned eax = cpuid_eax(10);
 		/* Check for version and the number of counters */
 		if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
 			set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
 	}

 	if (cpu_has_xmm2)
 		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
 	if (cpu_has_ds) {
 		unsigned int l1;
 		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
 		if (!(l1 & (1<<11)))
 			set_cpu_cap(c, X86_FEATURE_BTS);
 		if (!(l1 & (1<<12)))
 			set_cpu_cap(c, X86_FEATURE_PEBS);
 		ds_init_intel(c);
 	}

 	if (c->x86 == 6 && c->x86_model == 29 && cpu_has_clflush)
 		set_cpu_cap(c, X86_FEATURE_CLFLUSH_MONITOR);

 #ifdef CONFIG_X86_64
 	if (c->x86 == 15)
 		c->x86_cache_alignment = c->x86_clflush_size * 2;
 	if (c->x86 == 6)
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 #else
 	/*
 	 * Names for the Pentium II/Celeron processors
 	 * detectable only by also checking the cache size.
 	 * Dixon is NOT a Celeron.
 	 */
 	if (c->x86 == 6) {
 		char *p = NULL;

 		switch (c->x86_model) {
 		case 5:
 			if (c->x86_mask == 0) {
 				if (l2 == 0)
 					p = "Celeron (Covington)";
 				else if (l2 == 256)
 					p = "Mobile Pentium II (Dixon)";
 			}
 			break;

 		case 6:
 			if (l2 == 128)
 				p = "Celeron (Mendocino)";
 			else if (c->x86_mask == 0 || c->x86_mask == 5)
 				p = "Celeron-A";
 			break;

 		case 8:
 			if (l2 == 128)
 				p = "Celeron (Coppermine)";
 			break;
 		}

 		if (p)
 			strcpy(c->x86_model_id, p);
 	}

 	if (c->x86 == 15)
 		set_cpu_cap(c, X86_FEATURE_P4);
 	if (c->x86 == 6)
 		set_cpu_cap(c, X86_FEATURE_P3);
 #endif

 	if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) {
 		/*
 		 * let's use the legacy cpuid vector 0x1 and 0x4 for topology
 		 * detection.
 		 */
 		c->x86_max_cores = intel_num_cpu_cores(c);
 #ifdef CONFIG_X86_32
 		detect_ht(c);
 #endif
 	}

 	/* Work around errata */
 	srat_detect_node();

 	if (cpu_has(c, X86_FEATURE_VMX))
 		detect_vmx_virtcap(c);
 }

 #ifdef CONFIG_X86_32
 static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 {
 	/*
 	 * Intel PIII Tualatin. This comes in two flavours.
 	 * One has 256kb of cache, the other 512. We have no way
 	 * to determine which, so we use a boottime override
 	 * for the 512kb model, and assume 256 otherwise.
 	 */
 	if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0))
 		size = 256;
 	return size;
 }
 #endif

 static struct cpu_dev intel_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Intel",
 	.c_ident	= { "GenuineIntel" },
 #ifdef CONFIG_X86_32
 	.c_models = {
 		{ .vendor = X86_VENDOR_INTEL, .family = 4, .model_names =
 		  {
 			  [0] = "486 DX-25/33",
 			  [1] = "486 DX-50",
 			  [2] = "486 SX",
 			  [3] = "486 DX/2",
 			  [4] = "486 SL",
 			  [5] = "486 SX/2",
 			  [7] = "486 DX/2-WB",
 			  [8] = "486 DX/4",
 			  [9] = "486 DX/4-WB"
 		  }
 		},
 		{ .vendor = X86_VENDOR_INTEL, .family = 5, .model_names =
 		  {
 			  [0] = "Pentium 60/66 A-step",
 			  [1] = "Pentium 60/66",
 			  [2] = "Pentium 75 - 200",
 			  [3] = "OverDrive PODP5V83",
 			  [4] = "Pentium MMX",
 			  [7] = "Mobile Pentium 75 - 200",
 			  [8] = "Mobile Pentium MMX"
 		  }
 		},
 		{ .vendor = X86_VENDOR_INTEL, .family = 6, .model_names =
 		  {
 			  [0] = "Pentium Pro A-step",
 			  [1] = "Pentium Pro",
 			  [3] = "Pentium II (Klamath)",
 			  [4] = "Pentium II (Deschutes)",
 			  [5] = "Pentium II (Deschutes)",
 			  [6] = "Mobile Pentium II",
 			  [7] = "Pentium III (Katmai)",
 			  [8] = "Pentium III (Coppermine)",
 			  [10] = "Pentium III (Cascades)",
 			  [11] = "Pentium III (Tualatin)",
 		  }
 		},
 		{ .vendor = X86_VENDOR_INTEL, .family = 15, .model_names =
 		  {
 			  [0] = "Pentium 4 (Unknown)",
 			  [1] = "Pentium 4 (Willamette)",
 			  [2] = "Pentium 4 (Northwood)",
 			  [4] = "Pentium 4 (Foster)",
 			  [5] = "Pentium 4 (Foster)",
 		  }
 		},
 	},
 	.c_size_cache	= intel_size_cache,
 #endif
 	.c_early_init   = early_init_intel,
 	.c_init		= init_intel,
 	.c_x86_vendor	= X86_VENDOR_INTEL,
 };

 cpu_dev_register(intel_cpu_dev);
	#include <linux/init.h>
	#include <linux/kernel.h>

	#include <linux/string.h>
	#include <linux/bitops.h>
	#include <linux/smp.h>
	#include <linux/thread_info.h>
	#include <linux/module.h>

	#include <asm/processor.h>
	#include <asm/pgtable.h>
	#include <asm/msr.h>
	#include <asm/uaccess.h>
	#include <asm/ds.h>
	#include <asm/bugs.h>

	#ifdef CONFIG_X86_64
	#include <asm/topology.h>
	#include <asm/numa_64.h>
	#endif

	#include "cpu.h"

	#ifdef CONFIG_X86_LOCAL_APIC
	#include <asm/mpspec.h>
	#include <asm/apic.h>
	#endif

	static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
	{
	/* Unmask CPUID levels if masked: */
	if (c->x86 > 6 \|\| (c->x86 == 6 && c->x86_model >= 0xd)) {
	u64 misc_enable;

	rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);

	if (misc_enable & MSR_IA32_MISC_ENABLE_LIMIT_CPUID) {
	misc_enable &= ~MSR_IA32_MISC_ENABLE_LIMIT_CPUID;
	wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
	c->cpuid_level = cpuid_eax(0);
	}
	}

	if ((c->x86 == 0xf && c->x86_model >= 0x03) \|\|
	(c->x86 == 0x6 && c->x86_model >= 0x0e))
	set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);

	#ifdef CONFIG_X86_64
	set_cpu_cap(c, X86_FEATURE_SYSENTER32);
	#else
	/* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
	if (c->x86 == 15 && c->x86_cache_alignment == 64)
	c->x86_cache_alignment = 128;
	#endif

	/*
	* c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
	* with P/T states and does not stop in deep C-states
	*/
	if (c->x86_power & (1 << 8)) {
	set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
	set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
	}

	/*
	* There is a known erratum on Pentium III and Core Solo
	* and Core Duo CPUs.
	* " Page with PAT set to WC while associated MTRR is UC
	* may consolidate to UC "
	* Because of this erratum, it is better to stick with
	* setting WC in MTRR rather than using PAT on these CPUs.
	*
	* Enable PAT WC only on P4, Core 2 or later CPUs.
	*/
	if (c->x86 == 6 && c->x86_model < 15)
	clear_cpu_cap(c, X86_FEATURE_PAT);
	}

	#ifdef CONFIG_X86_32
	/*
	* Early probe support logic for ppro memory erratum #50
	*
	* This is called before we do cpu ident work
	*/

	int __cpuinit ppro_with_ram_bug(void)
	{
	/* Uses data from early_cpu_detect now */
	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
	boot_cpu_data.x86 == 6 &&
	boot_cpu_data.x86_model == 1 &&
	boot_cpu_data.x86_mask < 8) {
	printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
	return 1;
	}
	return 0;
	}

	#ifdef CONFIG_X86_F00F_BUG
	static void __cpuinit trap_init_f00f_bug(void)
	{
	__set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO);

	/*
	* Update the IDT descriptor and reload the IDT so that
	* it uses the read-only mapped virtual address.
	*/
	idt_descr.address = fix_to_virt(FIX_F00F_IDT);
	load_idt(&idt_descr);
	}
	#endif

	static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
	{
	unsigned long lo, hi;

	#ifdef CONFIG_X86_F00F_BUG
	/*
	* All current models of Pentium and Pentium with MMX technology CPUs
	* have the F0 0F bug, which lets nonprivileged users lock up the system.
	* Note that the workaround only should be initialized once...
	*/
	c->f00f_bug = 0;
	if (!paravirt_enabled() && c->x86 == 5) {
	static int f00f_workaround_enabled;

	c->f00f_bug = 1;
	if (!f00f_workaround_enabled) {
	trap_init_f00f_bug();
	printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
	f00f_workaround_enabled = 1;
	}
	}
	#endif

	/*
	* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until
	* model 3 mask 3
	*/
	if ((c->x86<<8 \| c->x86_model<<4 \| c->x86_mask) < 0x633)
	clear_cpu_cap(c, X86_FEATURE_SEP);

	/*
	* P4 Xeon errata 037 workaround.
	* Hardware prefetcher may cause stale data to be loaded into the cache.
	*/
	if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
	rdmsr(MSR_IA32_MISC_ENABLE, lo, hi);
	if ((lo & MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE) == 0) {
	printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
	printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
	lo \|= MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE;
	wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
	}
	}

	/*
	* See if we have a good local APIC by checking for buggy Pentia,
	* i.e. all B steppings and the C2 stepping of P54C when using their
	* integrated APIC (see 11AP erratum in "Pentium Processor
	* Specification Update").
	*/
	if (cpu_has_apic && (c->x86<<8 \| c->x86_model<<4) == 0x520 &&
	(c->x86_mask < 0x6 \|\| c->x86_mask == 0xb))
	set_cpu_cap(c, X86_FEATURE_11AP);


	#ifdef CONFIG_X86_INTEL_USERCOPY
	/*
	* Set up the preferred alignment for movsl bulk memory moves
	*/
	switch (c->x86) {
	case 4: /* 486: untested */
	break;
	case 5: /* Old Pentia: untested */
	break;
	case 6: /* PII/PIII only like movsl with 8-byte alignment */
	movsl_mask.mask = 7;
	break;
	case 15: /* P4 is OK down to 8-byte alignment */
	movsl_mask.mask = 7;
	break;
	}
	#endif

	#ifdef CONFIG_X86_NUMAQ
	numaq_tsc_disable();
	#endif
	}
	#else
	static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
	{
	}
	#endif

	static void __cpuinit srat_detect_node(void)
	{
	#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
	unsigned node;
	int cpu = smp_processor_id();
	int apicid = hard_smp_processor_id();

	/* Don't do the funky fallback heuristics the AMD version employs
	for now. */
	node = apicid_to_node[apicid];
	if (node == NUMA_NO_NODE \|\| !node_online(node))
	node = first_node(node_online_map);
	numa_set_node(cpu, node);

	printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
	#endif
	}

	/*
	* find out the number of processor cores on the die
	*/
	static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
	{
	unsigned int eax, ebx, ecx, edx;

	if (c->cpuid_level < 4)
	return 1;

	/* Intel has a non-standard dependency on %ecx for this CPUID level. */
	cpuid_count(4, 0, &eax, &ebx, &ecx, &edx);
	if (eax & 0x1f)
	return ((eax >> 26) + 1);
	else
	return 1;
	}

	static void __cpuinit detect_vmx_virtcap(struct cpuinfo_x86 *c)
	{
	/* Intel VMX MSR indicated features */
	#define X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW 0x00200000
	#define X86_VMX_FEATURE_PROC_CTLS_VNMI 0x00400000
	#define X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS 0x80000000
	#define X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC 0x00000001
	#define X86_VMX_FEATURE_PROC_CTLS2_EPT 0x00000002
	#define X86_VMX_FEATURE_PROC_CTLS2_VPID 0x00000020

	u32 vmx_msr_low, vmx_msr_high, msr_ctl, msr_ctl2;

	clear_cpu_cap(c, X86_FEATURE_TPR_SHADOW);
	clear_cpu_cap(c, X86_FEATURE_VNMI);
	clear_cpu_cap(c, X86_FEATURE_FLEXPRIORITY);
	clear_cpu_cap(c, X86_FEATURE_EPT);
	clear_cpu_cap(c, X86_FEATURE_VPID);

	rdmsr(MSR_IA32_VMX_PROCBASED_CTLS, vmx_msr_low, vmx_msr_high);
	msr_ctl = vmx_msr_high \| vmx_msr_low;
	if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW)
	set_cpu_cap(c, X86_FEATURE_TPR_SHADOW);
	if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_VNMI)
	set_cpu_cap(c, X86_FEATURE_VNMI);
	if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS) {
	rdmsr(MSR_IA32_VMX_PROCBASED_CTLS2,
	vmx_msr_low, vmx_msr_high);
	msr_ctl2 = vmx_msr_high \| vmx_msr_low;
	if ((msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC) &&
	(msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW))
	set_cpu_cap(c, X86_FEATURE_FLEXPRIORITY);
	if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_EPT)
	set_cpu_cap(c, X86_FEATURE_EPT);
	if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VPID)
	set_cpu_cap(c, X86_FEATURE_VPID);
	}
	}

	static void __cpuinit init_intel(struct cpuinfo_x86 *c)
	{
	unsigned int l2 = 0;

	early_init_intel(c);

	intel_workarounds(c);

	/*
	* Detect the extended topology information if available. This
	* will reinitialise the initial_apicid which will be used
	* in init_intel_cacheinfo()
	*/
	detect_extended_topology(c);

	l2 = init_intel_cacheinfo(c);
	if (c->cpuid_level > 9) {
	unsigned eax = cpuid_eax(10);
	/* Check for version and the number of counters */
	if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
	set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
	}

	if (cpu_has_xmm2)
	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
	if (cpu_has_ds) {
	unsigned int l1;
	rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
	if (!(l1 & (1<<11)))
	set_cpu_cap(c, X86_FEATURE_BTS);
	if (!(l1 & (1<<12)))
	set_cpu_cap(c, X86_FEATURE_PEBS);
	ds_init_intel(c);
	}

	if (c->x86 == 6 && c->x86_model == 29 && cpu_has_clflush)
	set_cpu_cap(c, X86_FEATURE_CLFLUSH_MONITOR);

	#ifdef CONFIG_X86_64
	if (c->x86 == 15)
	c->x86_cache_alignment = c->x86_clflush_size * 2;
	if (c->x86 == 6)
	set_cpu_cap(c, X86_FEATURE_REP_GOOD);
	#else
	/*
	* Names for the Pentium II/Celeron processors
	* detectable only by also checking the cache size.
	* Dixon is NOT a Celeron.
	*/
	if (c->x86 == 6) {
	char *p = NULL;

	switch (c->x86_model) {
	case 5:
	if (c->x86_mask == 0) {
	if (l2 == 0)
	p = "Celeron (Covington)";
	else if (l2 == 256)
	p = "Mobile Pentium II (Dixon)";
	}
	break;

	case 6:
	if (l2 == 128)
	p = "Celeron (Mendocino)";
	else if (c->x86_mask == 0 \|\| c->x86_mask == 5)
	p = "Celeron-A";
	break;

	case 8:
	if (l2 == 128)
	p = "Celeron (Coppermine)";
	break;
	}

	if (p)
	strcpy(c->x86_model_id, p);
	}

	if (c->x86 == 15)
	set_cpu_cap(c, X86_FEATURE_P4);
	if (c->x86 == 6)
	set_cpu_cap(c, X86_FEATURE_P3);
	#endif

	if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) {
	/*
	* let's use the legacy cpuid vector 0x1 and 0x4 for topology
	* detection.
	*/
	c->x86_max_cores = intel_num_cpu_cores(c);
	#ifdef CONFIG_X86_32
	detect_ht(c);
	#endif
	}

	/* Work around errata */
	srat_detect_node();

	if (cpu_has(c, X86_FEATURE_VMX))
	detect_vmx_virtcap(c);
	}

	#ifdef CONFIG_X86_32
	static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size)
	{
	/*
	* Intel PIII Tualatin. This comes in two flavours.
	* One has 256kb of cache, the other 512. We have no way
	* to determine which, so we use a boottime override
	* for the 512kb model, and assume 256 otherwise.
	*/
	if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0))
	size = 256;
	return size;
	}
	#endif

	static struct cpu_dev intel_cpu_dev __cpuinitdata = {
	.c_vendor = "Intel",
	.c_ident = { "GenuineIntel" },
	#ifdef CONFIG_X86_32
	.c_models = {
	{ .vendor = X86_VENDOR_INTEL, .family = 4, .model_names =
	{
	[0] = "486 DX-25/33",
	[1] = "486 DX-50",
	[2] = "486 SX",
	[3] = "486 DX/2",
	[4] = "486 SL",
	[5] = "486 SX/2",
	[7] = "486 DX/2-WB",
	[8] = "486 DX/4",
	[9] = "486 DX/4-WB"
	}
	},
	{ .vendor = X86_VENDOR_INTEL, .family = 5, .model_names =
	{
	[0] = "Pentium 60/66 A-step",
	[1] = "Pentium 60/66",
	[2] = "Pentium 75 - 200",
	[3] = "OverDrive PODP5V83",
	[4] = "Pentium MMX",
	[7] = "Mobile Pentium 75 - 200",
	[8] = "Mobile Pentium MMX"
	}
	},
	{ .vendor = X86_VENDOR_INTEL, .family = 6, .model_names =
	{
	[0] = "Pentium Pro A-step",
	[1] = "Pentium Pro",
	[3] = "Pentium II (Klamath)",
	[4] = "Pentium II (Deschutes)",
	[5] = "Pentium II (Deschutes)",
	[6] = "Mobile Pentium II",
	[7] = "Pentium III (Katmai)",
	[8] = "Pentium III (Coppermine)",
	[10] = "Pentium III (Cascades)",
	[11] = "Pentium III (Tualatin)",
	}
	},
	{ .vendor = X86_VENDOR_INTEL, .family = 15, .model_names =
	{
	[0] = "Pentium 4 (Unknown)",
	[1] = "Pentium 4 (Willamette)",
	[2] = "Pentium 4 (Northwood)",
	[4] = "Pentium 4 (Foster)",
	[5] = "Pentium 4 (Foster)",
	}
	},
	},
	.c_size_cache = intel_size_cache,
	#endif
	.c_early_init = early_init_intel,
	.c_init = init_intel,
	.c_x86_vendor = X86_VENDOR_INTEL,
	};

	cpu_dev_register(intel_cpu_dev);