| /* |
| * SCSI Zoned Block commands |
| * |
| * Copyright (C) 2014-2015 SUSE Linux GmbH |
| * Written by: Hannes Reinecke <hare@suse.de> |
| * Modified by: Damien Le Moal <damien.lemoal@hgst.com> |
| * Modified by: Shaun Tancheff <shaun.tancheff@seagate.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. If not, write to |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, |
| * USA. |
| * |
| */ |
| |
| #include <linux/blkdev.h> |
| |
| #include <asm/unaligned.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_dbg.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_driver.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_eh.h> |
| |
| #include "sd.h" |
| #include "scsi_priv.h" |
| |
| enum zbc_zone_type { |
| ZBC_ZONE_TYPE_CONV = 0x1, |
| ZBC_ZONE_TYPE_SEQWRITE_REQ, |
| ZBC_ZONE_TYPE_SEQWRITE_PREF, |
| ZBC_ZONE_TYPE_RESERVED, |
| }; |
| |
| enum zbc_zone_cond { |
| ZBC_ZONE_COND_NO_WP, |
| ZBC_ZONE_COND_EMPTY, |
| ZBC_ZONE_COND_IMP_OPEN, |
| ZBC_ZONE_COND_EXP_OPEN, |
| ZBC_ZONE_COND_CLOSED, |
| ZBC_ZONE_COND_READONLY = 0xd, |
| ZBC_ZONE_COND_FULL, |
| ZBC_ZONE_COND_OFFLINE, |
| }; |
| |
| /** |
| * Convert a zone descriptor to a zone struct. |
| */ |
| static void sd_zbc_parse_report(struct scsi_disk *sdkp, |
| u8 *buf, |
| struct blk_zone *zone) |
| { |
| struct scsi_device *sdp = sdkp->device; |
| |
| memset(zone, 0, sizeof(struct blk_zone)); |
| |
| zone->type = buf[0] & 0x0f; |
| zone->cond = (buf[1] >> 4) & 0xf; |
| if (buf[1] & 0x01) |
| zone->reset = 1; |
| if (buf[1] & 0x02) |
| zone->non_seq = 1; |
| |
| zone->len = logical_to_sectors(sdp, get_unaligned_be64(&buf[8])); |
| zone->start = logical_to_sectors(sdp, get_unaligned_be64(&buf[16])); |
| zone->wp = logical_to_sectors(sdp, get_unaligned_be64(&buf[24])); |
| if (zone->type != ZBC_ZONE_TYPE_CONV && |
| zone->cond == ZBC_ZONE_COND_FULL) |
| zone->wp = zone->start + zone->len; |
| } |
| |
| /** |
| * Issue a REPORT ZONES scsi command. |
| */ |
| static int sd_zbc_report_zones(struct scsi_disk *sdkp, unsigned char *buf, |
| unsigned int buflen, sector_t lba) |
| { |
| struct scsi_device *sdp = sdkp->device; |
| const int timeout = sdp->request_queue->rq_timeout; |
| struct scsi_sense_hdr sshdr; |
| unsigned char cmd[16]; |
| unsigned int rep_len; |
| int result; |
| |
| memset(cmd, 0, 16); |
| cmd[0] = ZBC_IN; |
| cmd[1] = ZI_REPORT_ZONES; |
| put_unaligned_be64(lba, &cmd[2]); |
| put_unaligned_be32(buflen, &cmd[10]); |
| memset(buf, 0, buflen); |
| |
| result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, |
| buf, buflen, &sshdr, |
| timeout, SD_MAX_RETRIES, NULL); |
| if (result) { |
| sd_printk(KERN_ERR, sdkp, |
| "REPORT ZONES lba %llu failed with %d/%d\n", |
| (unsigned long long)lba, |
| host_byte(result), driver_byte(result)); |
| return -EIO; |
| } |
| |
| rep_len = get_unaligned_be32(&buf[0]); |
| if (rep_len < 64) { |
| sd_printk(KERN_ERR, sdkp, |
| "REPORT ZONES report invalid length %u\n", |
| rep_len); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| int sd_zbc_setup_report_cmnd(struct scsi_cmnd *cmd) |
| { |
| struct request *rq = cmd->request; |
| struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); |
| sector_t lba, sector = blk_rq_pos(rq); |
| unsigned int nr_bytes = blk_rq_bytes(rq); |
| int ret; |
| |
| WARN_ON(nr_bytes == 0); |
| |
| if (!sd_is_zoned(sdkp)) |
| /* Not a zoned device */ |
| return BLKPREP_KILL; |
| |
| ret = scsi_init_io(cmd); |
| if (ret != BLKPREP_OK) |
| return ret; |
| |
| cmd->cmd_len = 16; |
| memset(cmd->cmnd, 0, cmd->cmd_len); |
| cmd->cmnd[0] = ZBC_IN; |
| cmd->cmnd[1] = ZI_REPORT_ZONES; |
| lba = sectors_to_logical(sdkp->device, sector); |
| put_unaligned_be64(lba, &cmd->cmnd[2]); |
| put_unaligned_be32(nr_bytes, &cmd->cmnd[10]); |
| /* Do partial report for speeding things up */ |
| cmd->cmnd[14] = ZBC_REPORT_ZONE_PARTIAL; |
| |
| cmd->sc_data_direction = DMA_FROM_DEVICE; |
| cmd->sdb.length = nr_bytes; |
| cmd->transfersize = sdkp->device->sector_size; |
| cmd->allowed = 0; |
| |
| /* |
| * Report may return less bytes than requested. Make sure |
| * to report completion on the entire initial request. |
| */ |
| rq->__data_len = nr_bytes; |
| |
| return BLKPREP_OK; |
| } |
| |
| static void sd_zbc_report_zones_complete(struct scsi_cmnd *scmd, |
| unsigned int good_bytes) |
| { |
| struct request *rq = scmd->request; |
| struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); |
| struct sg_mapping_iter miter; |
| struct blk_zone_report_hdr hdr; |
| struct blk_zone zone; |
| unsigned int offset, bytes = 0; |
| unsigned long flags; |
| u8 *buf; |
| |
| if (good_bytes < 64) |
| return; |
| |
| memset(&hdr, 0, sizeof(struct blk_zone_report_hdr)); |
| |
| sg_miter_start(&miter, scsi_sglist(scmd), scsi_sg_count(scmd), |
| SG_MITER_TO_SG | SG_MITER_ATOMIC); |
| |
| local_irq_save(flags); |
| while (sg_miter_next(&miter) && bytes < good_bytes) { |
| |
| buf = miter.addr; |
| offset = 0; |
| |
| if (bytes == 0) { |
| /* Set the report header */ |
| hdr.nr_zones = min_t(unsigned int, |
| (good_bytes - 64) / 64, |
| get_unaligned_be32(&buf[0]) / 64); |
| memcpy(buf, &hdr, sizeof(struct blk_zone_report_hdr)); |
| offset += 64; |
| bytes += 64; |
| } |
| |
| /* Parse zone descriptors */ |
| while (offset < miter.length && hdr.nr_zones) { |
| WARN_ON(offset > miter.length); |
| buf = miter.addr + offset; |
| sd_zbc_parse_report(sdkp, buf, &zone); |
| memcpy(buf, &zone, sizeof(struct blk_zone)); |
| offset += 64; |
| bytes += 64; |
| hdr.nr_zones--; |
| } |
| |
| if (!hdr.nr_zones) |
| break; |
| |
| } |
| sg_miter_stop(&miter); |
| local_irq_restore(flags); |
| } |
| |
| static inline sector_t sd_zbc_zone_sectors(struct scsi_disk *sdkp) |
| { |
| return logical_to_sectors(sdkp->device, sdkp->zone_blocks); |
| } |
| |
| static inline unsigned int sd_zbc_zone_no(struct scsi_disk *sdkp, |
| sector_t sector) |
| { |
| return sectors_to_logical(sdkp->device, sector) >> sdkp->zone_shift; |
| } |
| |
| int sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd) |
| { |
| struct request *rq = cmd->request; |
| struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); |
| sector_t sector = blk_rq_pos(rq); |
| sector_t block = sectors_to_logical(sdkp->device, sector); |
| |
| if (!sd_is_zoned(sdkp)) |
| /* Not a zoned device */ |
| return BLKPREP_KILL; |
| |
| if (sdkp->device->changed) |
| return BLKPREP_KILL; |
| |
| if (sector & (sd_zbc_zone_sectors(sdkp) - 1)) |
| /* Unaligned request */ |
| return BLKPREP_KILL; |
| |
| cmd->cmd_len = 16; |
| memset(cmd->cmnd, 0, cmd->cmd_len); |
| cmd->cmnd[0] = ZBC_OUT; |
| cmd->cmnd[1] = ZO_RESET_WRITE_POINTER; |
| put_unaligned_be64(block, &cmd->cmnd[2]); |
| |
| rq->timeout = SD_TIMEOUT; |
| cmd->sc_data_direction = DMA_NONE; |
| cmd->transfersize = 0; |
| cmd->allowed = 0; |
| |
| return BLKPREP_OK; |
| } |
| |
| int sd_zbc_write_lock_zone(struct scsi_cmnd *cmd) |
| { |
| struct request *rq = cmd->request; |
| struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); |
| sector_t sector = blk_rq_pos(rq); |
| sector_t zone_sectors = sd_zbc_zone_sectors(sdkp); |
| unsigned int zno = sd_zbc_zone_no(sdkp, sector); |
| |
| /* |
| * Note: Checks of the alignment of the write command on |
| * logical blocks is done in sd.c |
| */ |
| |
| /* Do not allow zone boundaries crossing on host-managed drives */ |
| if (blk_queue_zoned_model(sdkp->disk->queue) == BLK_ZONED_HM && |
| (sector & (zone_sectors - 1)) + blk_rq_sectors(rq) > zone_sectors) |
| return BLKPREP_KILL; |
| |
| /* |
| * Do not issue more than one write at a time per |
| * zone. This solves write ordering problems due to |
| * the unlocking of the request queue in the dispatch |
| * path in the non scsi-mq case. For scsi-mq, this |
| * also avoids potential write reordering when multiple |
| * threads running on different CPUs write to the same |
| * zone (with a synchronized sequential pattern). |
| */ |
| if (sdkp->zones_wlock && |
| test_and_set_bit(zno, sdkp->zones_wlock)) |
| return BLKPREP_DEFER; |
| |
| WARN_ON_ONCE(cmd->flags & SCMD_ZONE_WRITE_LOCK); |
| cmd->flags |= SCMD_ZONE_WRITE_LOCK; |
| |
| return BLKPREP_OK; |
| } |
| |
| void sd_zbc_write_unlock_zone(struct scsi_cmnd *cmd) |
| { |
| struct request *rq = cmd->request; |
| struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); |
| |
| if (sdkp->zones_wlock && cmd->flags & SCMD_ZONE_WRITE_LOCK) { |
| unsigned int zno = sd_zbc_zone_no(sdkp, blk_rq_pos(rq)); |
| WARN_ON_ONCE(!test_bit(zno, sdkp->zones_wlock)); |
| cmd->flags &= ~SCMD_ZONE_WRITE_LOCK; |
| clear_bit_unlock(zno, sdkp->zones_wlock); |
| smp_mb__after_atomic(); |
| } |
| } |
| |
| void sd_zbc_complete(struct scsi_cmnd *cmd, |
| unsigned int good_bytes, |
| struct scsi_sense_hdr *sshdr) |
| { |
| int result = cmd->result; |
| struct request *rq = cmd->request; |
| |
| switch (req_op(rq)) { |
| case REQ_OP_ZONE_RESET: |
| |
| if (result && |
| sshdr->sense_key == ILLEGAL_REQUEST && |
| sshdr->asc == 0x24) |
| /* |
| * INVALID FIELD IN CDB error: reset of a conventional |
| * zone was attempted. Nothing to worry about, so be |
| * quiet about the error. |
| */ |
| rq->rq_flags |= RQF_QUIET; |
| break; |
| |
| case REQ_OP_WRITE: |
| case REQ_OP_WRITE_ZEROES: |
| case REQ_OP_WRITE_SAME: |
| |
| if (result && |
| sshdr->sense_key == ILLEGAL_REQUEST && |
| sshdr->asc == 0x21) |
| /* |
| * INVALID ADDRESS FOR WRITE error: It is unlikely that |
| * retrying write requests failed with any kind of |
| * alignement error will result in success. So don't. |
| */ |
| cmd->allowed = 0; |
| break; |
| |
| case REQ_OP_ZONE_REPORT: |
| |
| if (!result) |
| sd_zbc_report_zones_complete(cmd, good_bytes); |
| break; |
| |
| } |
| } |
| |
| /** |
| * Read zoned block device characteristics (VPD page B6). |
| */ |
| static int sd_zbc_read_zoned_characteristics(struct scsi_disk *sdkp, |
| unsigned char *buf) |
| { |
| |
| if (scsi_get_vpd_page(sdkp->device, 0xb6, buf, 64)) { |
| sd_printk(KERN_NOTICE, sdkp, |
| "Unconstrained-read check failed\n"); |
| return -ENODEV; |
| } |
| |
| if (sdkp->device->type != TYPE_ZBC) { |
| /* Host-aware */ |
| sdkp->urswrz = 1; |
| sdkp->zones_optimal_open = get_unaligned_be32(&buf[8]); |
| sdkp->zones_optimal_nonseq = get_unaligned_be32(&buf[12]); |
| sdkp->zones_max_open = 0; |
| } else { |
| /* Host-managed */ |
| sdkp->urswrz = buf[4] & 1; |
| sdkp->zones_optimal_open = 0; |
| sdkp->zones_optimal_nonseq = 0; |
| sdkp->zones_max_open = get_unaligned_be32(&buf[16]); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Check reported capacity. |
| */ |
| static int sd_zbc_check_capacity(struct scsi_disk *sdkp, |
| unsigned char *buf) |
| { |
| sector_t lba; |
| int ret; |
| |
| if (sdkp->rc_basis != 0) |
| return 0; |
| |
| /* Do a report zone to get the maximum LBA to check capacity */ |
| ret = sd_zbc_report_zones(sdkp, buf, SD_BUF_SIZE, 0); |
| if (ret) |
| return ret; |
| |
| /* The max_lba field is the capacity of this device */ |
| lba = get_unaligned_be64(&buf[8]); |
| if (lba + 1 == sdkp->capacity) |
| return 0; |
| |
| if (sdkp->first_scan) |
| sd_printk(KERN_WARNING, sdkp, |
| "Changing capacity from %llu to max LBA+1 %llu\n", |
| (unsigned long long)sdkp->capacity, |
| (unsigned long long)lba + 1); |
| sdkp->capacity = lba + 1; |
| |
| return 0; |
| } |
| |
| #define SD_ZBC_BUF_SIZE 131072 |
| |
| static int sd_zbc_check_zone_size(struct scsi_disk *sdkp) |
| { |
| u64 zone_blocks; |
| sector_t block = 0; |
| unsigned char *buf; |
| unsigned char *rec; |
| unsigned int buf_len; |
| unsigned int list_length; |
| int ret; |
| u8 same; |
| |
| sdkp->zone_blocks = 0; |
| |
| /* Get a buffer */ |
| buf = kmalloc(SD_ZBC_BUF_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| /* Do a report zone to get the same field */ |
| ret = sd_zbc_report_zones(sdkp, buf, SD_ZBC_BUF_SIZE, 0); |
| if (ret) { |
| zone_blocks = 0; |
| goto out; |
| } |
| |
| same = buf[4] & 0x0f; |
| if (same > 0) { |
| rec = &buf[64]; |
| zone_blocks = get_unaligned_be64(&rec[8]); |
| goto out; |
| } |
| |
| /* |
| * Check the size of all zones: all zones must be of |
| * equal size, except the last zone which can be smaller |
| * than other zones. |
| */ |
| do { |
| |
| /* Parse REPORT ZONES header */ |
| list_length = get_unaligned_be32(&buf[0]) + 64; |
| rec = buf + 64; |
| if (list_length < SD_ZBC_BUF_SIZE) |
| buf_len = list_length; |
| else |
| buf_len = SD_ZBC_BUF_SIZE; |
| |
| /* Parse zone descriptors */ |
| while (rec < buf + buf_len) { |
| zone_blocks = get_unaligned_be64(&rec[8]); |
| if (sdkp->zone_blocks == 0) { |
| sdkp->zone_blocks = zone_blocks; |
| } else if (zone_blocks != sdkp->zone_blocks && |
| (block + zone_blocks < sdkp->capacity |
| || zone_blocks > sdkp->zone_blocks)) { |
| zone_blocks = 0; |
| goto out; |
| } |
| block += zone_blocks; |
| rec += 64; |
| } |
| |
| if (block < sdkp->capacity) { |
| ret = sd_zbc_report_zones(sdkp, buf, |
| SD_ZBC_BUF_SIZE, block); |
| if (ret) |
| return ret; |
| } |
| |
| } while (block < sdkp->capacity); |
| |
| zone_blocks = sdkp->zone_blocks; |
| |
| out: |
| kfree(buf); |
| |
| if (!zone_blocks) { |
| if (sdkp->first_scan) |
| sd_printk(KERN_NOTICE, sdkp, |
| "Devices with non constant zone " |
| "size are not supported\n"); |
| return -ENODEV; |
| } |
| |
| if (!is_power_of_2(zone_blocks)) { |
| if (sdkp->first_scan) |
| sd_printk(KERN_NOTICE, sdkp, |
| "Devices with non power of 2 zone " |
| "size are not supported\n"); |
| return -ENODEV; |
| } |
| |
| if (logical_to_sectors(sdkp->device, zone_blocks) > UINT_MAX) { |
| if (sdkp->first_scan) |
| sd_printk(KERN_NOTICE, sdkp, |
| "Zone size too large\n"); |
| return -ENODEV; |
| } |
| |
| sdkp->zone_blocks = zone_blocks; |
| |
| return 0; |
| } |
| |
| static int sd_zbc_setup(struct scsi_disk *sdkp) |
| { |
| |
| /* chunk_sectors indicates the zone size */ |
| blk_queue_chunk_sectors(sdkp->disk->queue, |
| logical_to_sectors(sdkp->device, sdkp->zone_blocks)); |
| sdkp->zone_shift = ilog2(sdkp->zone_blocks); |
| sdkp->nr_zones = sdkp->capacity >> sdkp->zone_shift; |
| if (sdkp->capacity & (sdkp->zone_blocks - 1)) |
| sdkp->nr_zones++; |
| |
| if (!sdkp->zones_wlock) { |
| sdkp->zones_wlock = kcalloc(BITS_TO_LONGS(sdkp->nr_zones), |
| sizeof(unsigned long), |
| GFP_KERNEL); |
| if (!sdkp->zones_wlock) |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| int sd_zbc_read_zones(struct scsi_disk *sdkp, |
| unsigned char *buf) |
| { |
| int ret; |
| |
| if (!sd_is_zoned(sdkp)) |
| /* |
| * Device managed or normal SCSI disk, |
| * no special handling required |
| */ |
| return 0; |
| |
| |
| /* Get zoned block device characteristics */ |
| ret = sd_zbc_read_zoned_characteristics(sdkp, buf); |
| if (ret) |
| goto err; |
| |
| /* |
| * Check for unconstrained reads: host-managed devices with |
| * constrained reads (drives failing read after write pointer) |
| * are not supported. |
| */ |
| if (!sdkp->urswrz) { |
| if (sdkp->first_scan) |
| sd_printk(KERN_NOTICE, sdkp, |
| "constrained reads devices are not supported\n"); |
| ret = -ENODEV; |
| goto err; |
| } |
| |
| /* Check capacity */ |
| ret = sd_zbc_check_capacity(sdkp, buf); |
| if (ret) |
| goto err; |
| |
| /* |
| * Check zone size: only devices with a constant zone size (except |
| * an eventual last runt zone) that is a power of 2 are supported. |
| */ |
| ret = sd_zbc_check_zone_size(sdkp); |
| if (ret) |
| goto err; |
| |
| /* The drive satisfies the kernel restrictions: set it up */ |
| ret = sd_zbc_setup(sdkp); |
| if (ret) |
| goto err; |
| |
| /* READ16/WRITE16 is mandatory for ZBC disks */ |
| sdkp->device->use_16_for_rw = 1; |
| sdkp->device->use_10_for_rw = 0; |
| |
| return 0; |
| |
| err: |
| sdkp->capacity = 0; |
| |
| return ret; |
| } |
| |
| void sd_zbc_remove(struct scsi_disk *sdkp) |
| { |
| kfree(sdkp->zones_wlock); |
| sdkp->zones_wlock = NULL; |
| } |
| |
| void sd_zbc_print_zones(struct scsi_disk *sdkp) |
| { |
| if (!sd_is_zoned(sdkp) || !sdkp->capacity) |
| return; |
| |
| if (sdkp->capacity & (sdkp->zone_blocks - 1)) |
| sd_printk(KERN_NOTICE, sdkp, |
| "%u zones of %u logical blocks + 1 runt zone\n", |
| sdkp->nr_zones - 1, |
| sdkp->zone_blocks); |
| else |
| sd_printk(KERN_NOTICE, sdkp, |
| "%u zones of %u logical blocks\n", |
| sdkp->nr_zones, |
| sdkp->zone_blocks); |
| } |