| # |
| # Drm device configuration |
| # |
| # This driver provides support for the |
| # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. |
| # |
| menuconfig DRM |
| tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" |
| depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && MMU |
| select I2C |
| select I2C_ALGOBIT |
| select LIST_SORT |
| help |
| Kernel-level support for the Direct Rendering Infrastructure (DRI) |
| introduced in XFree86 4.0. If you say Y here, you need to select |
| the module that's right for your graphics card from the list below. |
| These modules provide support for synchronization, security, and |
| DMA transfers. Please see <http://dri.sourceforge.net/> for more |
| details. You should also select and configure AGP |
| (/dev/agpgart) support. |
| |
| config DRM_KMS_HELPER |
| tristate |
| depends on DRM |
| select FB |
| select FRAMEBUFFER_CONSOLE if !EMBEDDED |
| help |
| FB and CRTC helpers for KMS drivers. |
| |
| config DRM_TTM |
| tristate |
| depends on DRM |
| help |
| GPU memory management subsystem for devices with multiple |
| GPU memory types. Will be enabled automatically if a device driver |
| uses it. |
| |
| config DRM_TDFX |
| tristate "3dfx Banshee/Voodoo3+" |
| depends on DRM && PCI |
| help |
| Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), |
| graphics card. If M is selected, the module will be called tdfx. |
| |
| config DRM_R128 |
| tristate "ATI Rage 128" |
| depends on DRM && PCI |
| select FW_LOADER |
| help |
| Choose this option if you have an ATI Rage 128 graphics card. If M |
| is selected, the module will be called r128. AGP support for |
| this card is strongly suggested (unless you have a PCI version). |
| |
| config DRM_RADEON |
| tristate "ATI Radeon" |
| depends on DRM && PCI |
| select FB_CFB_FILLRECT |
| select FB_CFB_COPYAREA |
| select FB_CFB_IMAGEBLIT |
| select FW_LOADER |
| select DRM_KMS_HELPER |
| select DRM_TTM |
| help |
| Choose this option if you have an ATI Radeon graphics card. There |
| are both PCI and AGP versions. You don't need to choose this to |
| run the Radeon in plain VGA mode. |
| |
| If M is selected, the module will be called radeon. |
| |
| source "drivers/gpu/drm/radeon/Kconfig" |
| |
| config DRM_I810 |
| tristate "Intel I810" |
| depends on DRM && AGP && AGP_INTEL |
| help |
| Choose this option if you have an Intel I810 graphics card. If M is |
| selected, the module will be called i810. AGP support is required |
| for this driver to work. |
| |
| choice |
| prompt "Intel 830M, 845G, 852GM, 855GM, 865G" |
| depends on DRM && AGP && AGP_INTEL |
| optional |
| |
| config DRM_I830 |
| tristate "i830 driver" |
| help |
| Choose this option if you have a system that has Intel 830M, 845G, |
| 852GM, 855GM or 865G integrated graphics. If M is selected, the |
| module will be called i830. AGP support is required for this driver |
| to work. This driver is used by the older X releases X.org 6.7 and |
| XFree86 4.3. If unsure, build this and i915 as modules and the X server |
| will load the correct one. |
| |
| config DRM_I915 |
| tristate "i915 driver" |
| depends on AGP_INTEL |
| select SHMEM |
| select DRM_KMS_HELPER |
| select FB_CFB_FILLRECT |
| select FB_CFB_COPYAREA |
| select FB_CFB_IMAGEBLIT |
| # i915 depends on ACPI_VIDEO when ACPI is enabled |
| # but for select to work, need to select ACPI_VIDEO's dependencies, ick |
| select VIDEO_OUTPUT_CONTROL if ACPI |
| select BACKLIGHT_CLASS_DEVICE if ACPI |
| select INPUT if ACPI |
| select ACPI_VIDEO if ACPI |
| select ACPI_BUTTON if ACPI |
| help |
| Choose this option if you have a system that has Intel 830M, 845G, |
| 852GM, 855GM 865G or 915G integrated graphics. If M is selected, the |
| module will be called i915. AGP support is required for this driver |
| to work. This driver is used by the Intel driver in X.org 6.8 and |
| XFree86 4.4 and above. If unsure, build this and i830 as modules and |
| the X server will load the correct one. |
| |
| config DRM_I915_KMS |
| bool "Enable modesetting on intel by default" |
| depends on DRM_I915 |
| help |
| Choose this option if you want kernel modesetting enabled by default, |
| and you have a new enough userspace to support this. Running old |
| userspaces with this enabled will cause pain. Note that this causes |
| the driver to bind to PCI devices, which precludes loading things |
| like intelfb. |
| |
| endchoice |
| |
| config DRM_MGA |
| tristate "Matrox g200/g400" |
| depends on DRM |
| select FW_LOADER |
| help |
| Choose this option if you have a Matrox G200, G400 or G450 graphics |
| card. If M is selected, the module will be called mga. AGP |
| support is required for this driver to work. |
| |
| config DRM_SIS |
| tristate "SiS video cards" |
| depends on DRM && AGP |
| depends on FB_SIS || FB_SIS=n |
| help |
| Choose this option if you have a SiS 630 or compatible video |
| chipset. If M is selected the module will be called sis. AGP |
| support is required for this driver to work. |
| |
| config DRM_VIA |
| tristate "Via unichrome video cards" |
| depends on DRM |
| help |
| Choose this option if you have a Via unichrome or compatible video |
| chipset. If M is selected the module will be called via. |
| |
| config DRM_SAVAGE |
| tristate "Savage video cards" |
| depends on DRM |
| help |
| Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister |
| chipset. If M is selected the module will be called savage. |