| /* |
| * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_vlan.h> |
| #include <linux/mii.h> |
| #include <linux/sockios.h> |
| #include <linux/workqueue.h> |
| #include <linux/proc_fs.h> |
| #include <linux/rtnetlink.h> |
| #include <asm/uaccess.h> |
| |
| #include "common.h" |
| #include "cxgb3_ioctl.h" |
| #include "regs.h" |
| #include "cxgb3_offload.h" |
| #include "version.h" |
| |
| #include "cxgb3_ctl_defs.h" |
| #include "t3_cpl.h" |
| #include "firmware_exports.h" |
| |
| enum { |
| MAX_TXQ_ENTRIES = 16384, |
| MAX_CTRL_TXQ_ENTRIES = 1024, |
| MAX_RSPQ_ENTRIES = 16384, |
| MAX_RX_BUFFERS = 16384, |
| MAX_RX_JUMBO_BUFFERS = 16384, |
| MIN_TXQ_ENTRIES = 4, |
| MIN_CTRL_TXQ_ENTRIES = 4, |
| MIN_RSPQ_ENTRIES = 32, |
| MIN_FL_ENTRIES = 32 |
| }; |
| |
| #define PORT_MASK ((1 << MAX_NPORTS) - 1) |
| |
| #define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ |
| NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ |
| NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) |
| |
| #define EEPROM_MAGIC 0x38E2F10C |
| |
| #define CH_DEVICE(devid, ssid, idx) \ |
| { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } |
| |
| static const struct pci_device_id cxgb3_pci_tbl[] = { |
| CH_DEVICE(0x20, 1, 0), /* PE9000 */ |
| CH_DEVICE(0x21, 1, 1), /* T302E */ |
| CH_DEVICE(0x22, 1, 2), /* T310E */ |
| CH_DEVICE(0x23, 1, 3), /* T320X */ |
| CH_DEVICE(0x24, 1, 1), /* T302X */ |
| CH_DEVICE(0x25, 1, 3), /* T320E */ |
| CH_DEVICE(0x26, 1, 2), /* T310X */ |
| CH_DEVICE(0x30, 1, 2), /* T3B10 */ |
| CH_DEVICE(0x31, 1, 3), /* T3B20 */ |
| CH_DEVICE(0x32, 1, 1), /* T3B02 */ |
| {0,} |
| }; |
| |
| MODULE_DESCRIPTION(DRV_DESC); |
| MODULE_AUTHOR("Chelsio Communications"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_DEVICE_TABLE(pci, cxgb3_pci_tbl); |
| |
| static int dflt_msg_enable = DFLT_MSG_ENABLE; |
| |
| module_param(dflt_msg_enable, int, 0644); |
| MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T3 default message enable bitmap"); |
| |
| /* |
| * The driver uses the best interrupt scheme available on a platform in the |
| * order MSI-X, MSI, legacy pin interrupts. This parameter determines which |
| * of these schemes the driver may consider as follows: |
| * |
| * msi = 2: choose from among all three options |
| * msi = 1: only consider MSI and pin interrupts |
| * msi = 0: force pin interrupts |
| */ |
| static int msi = 2; |
| |
| module_param(msi, int, 0644); |
| MODULE_PARM_DESC(msi, "whether to use MSI or MSI-X"); |
| |
| /* |
| * The driver enables offload as a default. |
| * To disable it, use ofld_disable = 1. |
| */ |
| |
| static int ofld_disable = 0; |
| |
| module_param(ofld_disable, int, 0644); |
| MODULE_PARM_DESC(ofld_disable, "whether to enable offload at init time or not"); |
| |
| /* |
| * We have work elements that we need to cancel when an interface is taken |
| * down. Normally the work elements would be executed by keventd but that |
| * can deadlock because of linkwatch. If our close method takes the rtnl |
| * lock and linkwatch is ahead of our work elements in keventd, linkwatch |
| * will block keventd as it needs the rtnl lock, and we'll deadlock waiting |
| * for our work to complete. Get our own work queue to solve this. |
| */ |
| static struct workqueue_struct *cxgb3_wq; |
| |
| /** |
| * link_report - show link status and link speed/duplex |
| * @p: the port whose settings are to be reported |
| * |
| * Shows the link status, speed, and duplex of a port. |
| */ |
| static void link_report(struct net_device *dev) |
| { |
| if (!netif_carrier_ok(dev)) |
| printk(KERN_INFO "%s: link down\n", dev->name); |
| else { |
| const char *s = "10Mbps"; |
| const struct port_info *p = netdev_priv(dev); |
| |
| switch (p->link_config.speed) { |
| case SPEED_10000: |
| s = "10Gbps"; |
| break; |
| case SPEED_1000: |
| s = "1000Mbps"; |
| break; |
| case SPEED_100: |
| s = "100Mbps"; |
| break; |
| } |
| |
| printk(KERN_INFO "%s: link up, %s, %s-duplex\n", dev->name, s, |
| p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); |
| } |
| } |
| |
| /** |
| * t3_os_link_changed - handle link status changes |
| * @adapter: the adapter associated with the link change |
| * @port_id: the port index whose limk status has changed |
| * @link_stat: the new status of the link |
| * @speed: the new speed setting |
| * @duplex: the new duplex setting |
| * @pause: the new flow-control setting |
| * |
| * This is the OS-dependent handler for link status changes. The OS |
| * neutral handler takes care of most of the processing for these events, |
| * then calls this handler for any OS-specific processing. |
| */ |
| void t3_os_link_changed(struct adapter *adapter, int port_id, int link_stat, |
| int speed, int duplex, int pause) |
| { |
| struct net_device *dev = adapter->port[port_id]; |
| |
| /* Skip changes from disabled ports. */ |
| if (!netif_running(dev)) |
| return; |
| |
| if (link_stat != netif_carrier_ok(dev)) { |
| if (link_stat) |
| netif_carrier_on(dev); |
| else |
| netif_carrier_off(dev); |
| link_report(dev); |
| } |
| } |
| |
| static void cxgb_set_rxmode(struct net_device *dev) |
| { |
| struct t3_rx_mode rm; |
| struct port_info *pi = netdev_priv(dev); |
| |
| init_rx_mode(&rm, dev, dev->mc_list); |
| t3_mac_set_rx_mode(&pi->mac, &rm); |
| } |
| |
| /** |
| * link_start - enable a port |
| * @dev: the device to enable |
| * |
| * Performs the MAC and PHY actions needed to enable a port. |
| */ |
| static void link_start(struct net_device *dev) |
| { |
| struct t3_rx_mode rm; |
| struct port_info *pi = netdev_priv(dev); |
| struct cmac *mac = &pi->mac; |
| |
| init_rx_mode(&rm, dev, dev->mc_list); |
| t3_mac_reset(mac); |
| t3_mac_set_mtu(mac, dev->mtu); |
| t3_mac_set_address(mac, 0, dev->dev_addr); |
| t3_mac_set_rx_mode(mac, &rm); |
| t3_link_start(&pi->phy, mac, &pi->link_config); |
| t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); |
| } |
| |
| static inline void cxgb_disable_msi(struct adapter *adapter) |
| { |
| if (adapter->flags & USING_MSIX) { |
| pci_disable_msix(adapter->pdev); |
| adapter->flags &= ~USING_MSIX; |
| } else if (adapter->flags & USING_MSI) { |
| pci_disable_msi(adapter->pdev); |
| adapter->flags &= ~USING_MSI; |
| } |
| } |
| |
| /* |
| * Interrupt handler for asynchronous events used with MSI-X. |
| */ |
| static irqreturn_t t3_async_intr_handler(int irq, void *cookie) |
| { |
| t3_slow_intr_handler(cookie); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Name the MSI-X interrupts. |
| */ |
| static void name_msix_vecs(struct adapter *adap) |
| { |
| int i, j, msi_idx = 1, n = sizeof(adap->msix_info[0].desc) - 1; |
| |
| snprintf(adap->msix_info[0].desc, n, "%s", adap->name); |
| adap->msix_info[0].desc[n] = 0; |
| |
| for_each_port(adap, j) { |
| struct net_device *d = adap->port[j]; |
| const struct port_info *pi = netdev_priv(d); |
| |
| for (i = 0; i < pi->nqsets; i++, msi_idx++) { |
| snprintf(adap->msix_info[msi_idx].desc, n, |
| "%s (queue %d)", d->name, i); |
| adap->msix_info[msi_idx].desc[n] = 0; |
| } |
| } |
| } |
| |
| static int request_msix_data_irqs(struct adapter *adap) |
| { |
| int i, j, err, qidx = 0; |
| |
| for_each_port(adap, i) { |
| int nqsets = adap2pinfo(adap, i)->nqsets; |
| |
| for (j = 0; j < nqsets; ++j) { |
| err = request_irq(adap->msix_info[qidx + 1].vec, |
| t3_intr_handler(adap, |
| adap->sge.qs[qidx]. |
| rspq.polling), 0, |
| adap->msix_info[qidx + 1].desc, |
| &adap->sge.qs[qidx]); |
| if (err) { |
| while (--qidx >= 0) |
| free_irq(adap->msix_info[qidx + 1].vec, |
| &adap->sge.qs[qidx]); |
| return err; |
| } |
| qidx++; |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * setup_rss - configure RSS |
| * @adap: the adapter |
| * |
| * Sets up RSS to distribute packets to multiple receive queues. We |
| * configure the RSS CPU lookup table to distribute to the number of HW |
| * receive queues, and the response queue lookup table to narrow that |
| * down to the response queues actually configured for each port. |
| * We always configure the RSS mapping for two ports since the mapping |
| * table has plenty of entries. |
| */ |
| static void setup_rss(struct adapter *adap) |
| { |
| int i; |
| unsigned int nq0 = adap2pinfo(adap, 0)->nqsets; |
| unsigned int nq1 = adap->port[1] ? adap2pinfo(adap, 1)->nqsets : 1; |
| u8 cpus[SGE_QSETS + 1]; |
| u16 rspq_map[RSS_TABLE_SIZE]; |
| |
| for (i = 0; i < SGE_QSETS; ++i) |
| cpus[i] = i; |
| cpus[SGE_QSETS] = 0xff; /* terminator */ |
| |
| for (i = 0; i < RSS_TABLE_SIZE / 2; ++i) { |
| rspq_map[i] = i % nq0; |
| rspq_map[i + RSS_TABLE_SIZE / 2] = (i % nq1) + nq0; |
| } |
| |
| t3_config_rss(adap, F_RQFEEDBACKENABLE | F_TNLLKPEN | F_TNLMAPEN | |
| F_TNLPRTEN | F_TNL2TUPEN | F_TNL4TUPEN | |
| V_RRCPLCPUSIZE(6), cpus, rspq_map); |
| } |
| |
| /* |
| * If we have multiple receive queues per port serviced by NAPI we need one |
| * netdevice per queue as NAPI operates on netdevices. We already have one |
| * netdevice, namely the one associated with the interface, so we use dummy |
| * ones for any additional queues. Note that these netdevices exist purely |
| * so that NAPI has something to work with, they do not represent network |
| * ports and are not registered. |
| */ |
| static int init_dummy_netdevs(struct adapter *adap) |
| { |
| int i, j, dummy_idx = 0; |
| struct net_device *nd; |
| |
| for_each_port(adap, i) { |
| struct net_device *dev = adap->port[i]; |
| const struct port_info *pi = netdev_priv(dev); |
| |
| for (j = 0; j < pi->nqsets - 1; j++) { |
| if (!adap->dummy_netdev[dummy_idx]) { |
| nd = alloc_netdev(0, "", ether_setup); |
| if (!nd) |
| goto free_all; |
| |
| nd->priv = adap; |
| nd->weight = 64; |
| set_bit(__LINK_STATE_START, &nd->state); |
| adap->dummy_netdev[dummy_idx] = nd; |
| } |
| strcpy(adap->dummy_netdev[dummy_idx]->name, dev->name); |
| dummy_idx++; |
| } |
| } |
| return 0; |
| |
| free_all: |
| while (--dummy_idx >= 0) { |
| free_netdev(adap->dummy_netdev[dummy_idx]); |
| adap->dummy_netdev[dummy_idx] = NULL; |
| } |
| return -ENOMEM; |
| } |
| |
| /* |
| * Wait until all NAPI handlers are descheduled. This includes the handlers of |
| * both netdevices representing interfaces and the dummy ones for the extra |
| * queues. |
| */ |
| static void quiesce_rx(struct adapter *adap) |
| { |
| int i; |
| struct net_device *dev; |
| |
| for_each_port(adap, i) { |
| dev = adap->port[i]; |
| while (test_bit(__LINK_STATE_RX_SCHED, &dev->state)) |
| msleep(1); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(adap->dummy_netdev); i++) { |
| dev = adap->dummy_netdev[i]; |
| if (dev) |
| while (test_bit(__LINK_STATE_RX_SCHED, &dev->state)) |
| msleep(1); |
| } |
| } |
| |
| /** |
| * setup_sge_qsets - configure SGE Tx/Rx/response queues |
| * @adap: the adapter |
| * |
| * Determines how many sets of SGE queues to use and initializes them. |
| * We support multiple queue sets per port if we have MSI-X, otherwise |
| * just one queue set per port. |
| */ |
| static int setup_sge_qsets(struct adapter *adap) |
| { |
| int i, j, err, irq_idx = 0, qset_idx = 0, dummy_dev_idx = 0; |
| unsigned int ntxq = is_offload(adap) ? SGE_TXQ_PER_SET : 1; |
| |
| if (adap->params.rev > 0 && !(adap->flags & USING_MSI)) |
| irq_idx = -1; |
| |
| for_each_port(adap, i) { |
| struct net_device *dev = adap->port[i]; |
| const struct port_info *pi = netdev_priv(dev); |
| |
| for (j = 0; j < pi->nqsets; ++j, ++qset_idx) { |
| err = t3_sge_alloc_qset(adap, qset_idx, 1, |
| (adap->flags & USING_MSIX) ? qset_idx + 1 : |
| irq_idx, |
| &adap->params.sge.qset[qset_idx], ntxq, |
| j == 0 ? dev : |
| adap-> dummy_netdev[dummy_dev_idx++]); |
| if (err) { |
| t3_free_sge_resources(adap); |
| return err; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t attr_show(struct device *d, struct device_attribute *attr, |
| char *buf, |
| ssize_t(*format) (struct net_device *, char *)) |
| { |
| ssize_t len; |
| |
| /* Synchronize with ioctls that may shut down the device */ |
| rtnl_lock(); |
| len = (*format) (to_net_dev(d), buf); |
| rtnl_unlock(); |
| return len; |
| } |
| |
| static ssize_t attr_store(struct device *d, struct device_attribute *attr, |
| const char *buf, size_t len, |
| ssize_t(*set) (struct net_device *, unsigned int), |
| unsigned int min_val, unsigned int max_val) |
| { |
| char *endp; |
| ssize_t ret; |
| unsigned int val; |
| |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| val = simple_strtoul(buf, &endp, 0); |
| if (endp == buf || val < min_val || val > max_val) |
| return -EINVAL; |
| |
| rtnl_lock(); |
| ret = (*set) (to_net_dev(d), val); |
| if (!ret) |
| ret = len; |
| rtnl_unlock(); |
| return ret; |
| } |
| |
| #define CXGB3_SHOW(name, val_expr) \ |
| static ssize_t format_##name(struct net_device *dev, char *buf) \ |
| { \ |
| struct adapter *adap = dev->priv; \ |
| return sprintf(buf, "%u\n", val_expr); \ |
| } \ |
| static ssize_t show_##name(struct device *d, struct device_attribute *attr, \ |
| char *buf) \ |
| { \ |
| return attr_show(d, attr, buf, format_##name); \ |
| } |
| |
| static ssize_t set_nfilters(struct net_device *dev, unsigned int val) |
| { |
| struct adapter *adap = dev->priv; |
| |
| if (adap->flags & FULL_INIT_DONE) |
| return -EBUSY; |
| if (val && adap->params.rev == 0) |
| return -EINVAL; |
| if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nservers) |
| return -EINVAL; |
| adap->params.mc5.nfilters = val; |
| return 0; |
| } |
| |
| static ssize_t store_nfilters(struct device *d, struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| return attr_store(d, attr, buf, len, set_nfilters, 0, ~0); |
| } |
| |
| static ssize_t set_nservers(struct net_device *dev, unsigned int val) |
| { |
| struct adapter *adap = dev->priv; |
| |
| if (adap->flags & FULL_INIT_DONE) |
| return -EBUSY; |
| if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nfilters) |
| return -EINVAL; |
| adap->params.mc5.nservers = val; |
| return 0; |
| } |
| |
| static ssize_t store_nservers(struct device *d, struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| return attr_store(d, attr, buf, len, set_nservers, 0, ~0); |
| } |
| |
| #define CXGB3_ATTR_R(name, val_expr) \ |
| CXGB3_SHOW(name, val_expr) \ |
| static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL) |
| |
| #define CXGB3_ATTR_RW(name, val_expr, store_method) \ |
| CXGB3_SHOW(name, val_expr) \ |
| static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_##name, store_method) |
| |
| CXGB3_ATTR_R(cam_size, t3_mc5_size(&adap->mc5)); |
| CXGB3_ATTR_RW(nfilters, adap->params.mc5.nfilters, store_nfilters); |
| CXGB3_ATTR_RW(nservers, adap->params.mc5.nservers, store_nservers); |
| |
| static struct attribute *cxgb3_attrs[] = { |
| &dev_attr_cam_size.attr, |
| &dev_attr_nfilters.attr, |
| &dev_attr_nservers.attr, |
| NULL |
| }; |
| |
| static struct attribute_group cxgb3_attr_group = {.attrs = cxgb3_attrs }; |
| |
| static ssize_t tm_attr_show(struct device *d, struct device_attribute *attr, |
| char *buf, int sched) |
| { |
| ssize_t len; |
| unsigned int v, addr, bpt, cpt; |
| struct adapter *adap = to_net_dev(d)->priv; |
| |
| addr = A_TP_TX_MOD_Q1_Q0_RATE_LIMIT - sched / 2; |
| rtnl_lock(); |
| t3_write_reg(adap, A_TP_TM_PIO_ADDR, addr); |
| v = t3_read_reg(adap, A_TP_TM_PIO_DATA); |
| if (sched & 1) |
| v >>= 16; |
| bpt = (v >> 8) & 0xff; |
| cpt = v & 0xff; |
| if (!cpt) |
| len = sprintf(buf, "disabled\n"); |
| else { |
| v = (adap->params.vpd.cclk * 1000) / cpt; |
| len = sprintf(buf, "%u Kbps\n", (v * bpt) / 125); |
| } |
| rtnl_unlock(); |
| return len; |
| } |
| |
| static ssize_t tm_attr_store(struct device *d, struct device_attribute *attr, |
| const char *buf, size_t len, int sched) |
| { |
| char *endp; |
| ssize_t ret; |
| unsigned int val; |
| struct adapter *adap = to_net_dev(d)->priv; |
| |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| val = simple_strtoul(buf, &endp, 0); |
| if (endp == buf || val > 10000000) |
| return -EINVAL; |
| |
| rtnl_lock(); |
| ret = t3_config_sched(adap, val, sched); |
| if (!ret) |
| ret = len; |
| rtnl_unlock(); |
| return ret; |
| } |
| |
| #define TM_ATTR(name, sched) \ |
| static ssize_t show_##name(struct device *d, struct device_attribute *attr, \ |
| char *buf) \ |
| { \ |
| return tm_attr_show(d, attr, buf, sched); \ |
| } \ |
| static ssize_t store_##name(struct device *d, struct device_attribute *attr, \ |
| const char *buf, size_t len) \ |
| { \ |
| return tm_attr_store(d, attr, buf, len, sched); \ |
| } \ |
| static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_##name, store_##name) |
| |
| TM_ATTR(sched0, 0); |
| TM_ATTR(sched1, 1); |
| TM_ATTR(sched2, 2); |
| TM_ATTR(sched3, 3); |
| TM_ATTR(sched4, 4); |
| TM_ATTR(sched5, 5); |
| TM_ATTR(sched6, 6); |
| TM_ATTR(sched7, 7); |
| |
| static struct attribute *offload_attrs[] = { |
| &dev_attr_sched0.attr, |
| &dev_attr_sched1.attr, |
| &dev_attr_sched2.attr, |
| &dev_attr_sched3.attr, |
| &dev_attr_sched4.attr, |
| &dev_attr_sched5.attr, |
| &dev_attr_sched6.attr, |
| &dev_attr_sched7.attr, |
| NULL |
| }; |
| |
| static struct attribute_group offload_attr_group = {.attrs = offload_attrs }; |
| |
| /* |
| * Sends an sk_buff to an offload queue driver |
| * after dealing with any active network taps. |
| */ |
| static inline int offload_tx(struct t3cdev *tdev, struct sk_buff *skb) |
| { |
| int ret; |
| |
| local_bh_disable(); |
| ret = t3_offload_tx(tdev, skb); |
| local_bh_enable(); |
| return ret; |
| } |
| |
| static int write_smt_entry(struct adapter *adapter, int idx) |
| { |
| struct cpl_smt_write_req *req; |
| struct sk_buff *skb = alloc_skb(sizeof(*req), GFP_KERNEL); |
| |
| if (!skb) |
| return -ENOMEM; |
| |
| req = (struct cpl_smt_write_req *)__skb_put(skb, sizeof(*req)); |
| req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); |
| OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, idx)); |
| req->mtu_idx = NMTUS - 1; /* should be 0 but there's a T3 bug */ |
| req->iff = idx; |
| memset(req->src_mac1, 0, sizeof(req->src_mac1)); |
| memcpy(req->src_mac0, adapter->port[idx]->dev_addr, ETH_ALEN); |
| skb->priority = 1; |
| offload_tx(&adapter->tdev, skb); |
| return 0; |
| } |
| |
| static int init_smt(struct adapter *adapter) |
| { |
| int i; |
| |
| for_each_port(adapter, i) |
| write_smt_entry(adapter, i); |
| return 0; |
| } |
| |
| static void init_port_mtus(struct adapter *adapter) |
| { |
| unsigned int mtus = adapter->port[0]->mtu; |
| |
| if (adapter->port[1]) |
| mtus |= adapter->port[1]->mtu << 16; |
| t3_write_reg(adapter, A_TP_MTU_PORT_TABLE, mtus); |
| } |
| |
| static void send_pktsched_cmd(struct adapter *adap, int sched, int qidx, int lo, |
| int hi, int port) |
| { |
| struct sk_buff *skb; |
| struct mngt_pktsched_wr *req; |
| |
| skb = alloc_skb(sizeof(*req), GFP_KERNEL | __GFP_NOFAIL); |
| req = (struct mngt_pktsched_wr *)skb_put(skb, sizeof(*req)); |
| req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_MNGT)); |
| req->mngt_opcode = FW_MNGTOPCODE_PKTSCHED_SET; |
| req->sched = sched; |
| req->idx = qidx; |
| req->min = lo; |
| req->max = hi; |
| req->binding = port; |
| t3_mgmt_tx(adap, skb); |
| } |
| |
| static void bind_qsets(struct adapter *adap) |
| { |
| int i, j; |
| |
| for_each_port(adap, i) { |
| const struct port_info *pi = adap2pinfo(adap, i); |
| |
| for (j = 0; j < pi->nqsets; ++j) |
| send_pktsched_cmd(adap, 1, pi->first_qset + j, -1, |
| -1, i); |
| } |
| } |
| |
| /** |
| * cxgb_up - enable the adapter |
| * @adapter: adapter being enabled |
| * |
| * Called when the first port is enabled, this function performs the |
| * actions necessary to make an adapter operational, such as completing |
| * the initialization of HW modules, and enabling interrupts. |
| * |
| * Must be called with the rtnl lock held. |
| */ |
| static int cxgb_up(struct adapter *adap) |
| { |
| int err = 0; |
| |
| if (!(adap->flags & FULL_INIT_DONE)) { |
| err = t3_check_fw_version(adap); |
| if (err) |
| goto out; |
| |
| err = init_dummy_netdevs(adap); |
| if (err) |
| goto out; |
| |
| err = t3_init_hw(adap, 0); |
| if (err) |
| goto out; |
| |
| err = setup_sge_qsets(adap); |
| if (err) |
| goto out; |
| |
| setup_rss(adap); |
| adap->flags |= FULL_INIT_DONE; |
| } |
| |
| t3_intr_clear(adap); |
| |
| if (adap->flags & USING_MSIX) { |
| name_msix_vecs(adap); |
| err = request_irq(adap->msix_info[0].vec, |
| t3_async_intr_handler, 0, |
| adap->msix_info[0].desc, adap); |
| if (err) |
| goto irq_err; |
| |
| if (request_msix_data_irqs(adap)) { |
| free_irq(adap->msix_info[0].vec, adap); |
| goto irq_err; |
| } |
| } else if ((err = request_irq(adap->pdev->irq, |
| t3_intr_handler(adap, |
| adap->sge.qs[0].rspq. |
| polling), |
| (adap->flags & USING_MSI) ? |
| 0 : IRQF_SHARED, |
| adap->name, adap))) |
| goto irq_err; |
| |
| t3_sge_start(adap); |
| t3_intr_enable(adap); |
| |
| if ((adap->flags & (USING_MSIX | QUEUES_BOUND)) == USING_MSIX) |
| bind_qsets(adap); |
| adap->flags |= QUEUES_BOUND; |
| |
| out: |
| return err; |
| irq_err: |
| CH_ERR(adap, "request_irq failed, err %d\n", err); |
| goto out; |
| } |
| |
| /* |
| * Release resources when all the ports and offloading have been stopped. |
| */ |
| static void cxgb_down(struct adapter *adapter) |
| { |
| t3_sge_stop(adapter); |
| spin_lock_irq(&adapter->work_lock); /* sync with PHY intr task */ |
| t3_intr_disable(adapter); |
| spin_unlock_irq(&adapter->work_lock); |
| |
| if (adapter->flags & USING_MSIX) { |
| int i, n = 0; |
| |
| free_irq(adapter->msix_info[0].vec, adapter); |
| for_each_port(adapter, i) |
| n += adap2pinfo(adapter, i)->nqsets; |
| |
| for (i = 0; i < n; ++i) |
| free_irq(adapter->msix_info[i + 1].vec, |
| &adapter->sge.qs[i]); |
| } else |
| free_irq(adapter->pdev->irq, adapter); |
| |
| flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */ |
| quiesce_rx(adapter); |
| } |
| |
| static void schedule_chk_task(struct adapter *adap) |
| { |
| unsigned int timeo; |
| |
| timeo = adap->params.linkpoll_period ? |
| (HZ * adap->params.linkpoll_period) / 10 : |
| adap->params.stats_update_period * HZ; |
| if (timeo) |
| queue_delayed_work(cxgb3_wq, &adap->adap_check_task, timeo); |
| } |
| |
| static int offload_open(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->priv; |
| struct t3cdev *tdev = T3CDEV(dev); |
| int adap_up = adapter->open_device_map & PORT_MASK; |
| int err = 0; |
| |
| if (test_and_set_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) |
| return 0; |
| |
| if (!adap_up && (err = cxgb_up(adapter)) < 0) |
| return err; |
| |
| t3_tp_set_offload_mode(adapter, 1); |
| tdev->lldev = adapter->port[0]; |
| err = cxgb3_offload_activate(adapter); |
| if (err) |
| goto out; |
| |
| init_port_mtus(adapter); |
| t3_load_mtus(adapter, adapter->params.mtus, adapter->params.a_wnd, |
| adapter->params.b_wnd, |
| adapter->params.rev == 0 ? |
| adapter->port[0]->mtu : 0xffff); |
| init_smt(adapter); |
| |
| /* Never mind if the next step fails */ |
| sysfs_create_group(&tdev->lldev->dev.kobj, &offload_attr_group); |
| |
| /* Call back all registered clients */ |
| cxgb3_add_clients(tdev); |
| |
| out: |
| /* restore them in case the offload module has changed them */ |
| if (err) { |
| t3_tp_set_offload_mode(adapter, 0); |
| clear_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map); |
| cxgb3_set_dummy_ops(tdev); |
| } |
| return err; |
| } |
| |
| static int offload_close(struct t3cdev *tdev) |
| { |
| struct adapter *adapter = tdev2adap(tdev); |
| |
| if (!test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) |
| return 0; |
| |
| /* Call back all registered clients */ |
| cxgb3_remove_clients(tdev); |
| |
| sysfs_remove_group(&tdev->lldev->dev.kobj, &offload_attr_group); |
| |
| tdev->lldev = NULL; |
| cxgb3_set_dummy_ops(tdev); |
| t3_tp_set_offload_mode(adapter, 0); |
| clear_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map); |
| |
| if (!adapter->open_device_map) |
| cxgb_down(adapter); |
| |
| cxgb3_offload_deactivate(adapter); |
| return 0; |
| } |
| |
| static int cxgb_open(struct net_device *dev) |
| { |
| int err; |
| struct adapter *adapter = dev->priv; |
| struct port_info *pi = netdev_priv(dev); |
| int other_ports = adapter->open_device_map & PORT_MASK; |
| |
| if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0) |
| return err; |
| |
| set_bit(pi->port_id, &adapter->open_device_map); |
| if (!ofld_disable) { |
| err = offload_open(dev); |
| if (err) |
| printk(KERN_WARNING |
| "Could not initialize offload capabilities\n"); |
| } |
| |
| link_start(dev); |
| t3_port_intr_enable(adapter, pi->port_id); |
| netif_start_queue(dev); |
| if (!other_ports) |
| schedule_chk_task(adapter); |
| |
| return 0; |
| } |
| |
| static int cxgb_close(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->priv; |
| struct port_info *p = netdev_priv(dev); |
| |
| t3_port_intr_disable(adapter, p->port_id); |
| netif_stop_queue(dev); |
| p->phy.ops->power_down(&p->phy, 1); |
| netif_carrier_off(dev); |
| t3_mac_disable(&p->mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX); |
| |
| spin_lock(&adapter->work_lock); /* sync with update task */ |
| clear_bit(p->port_id, &adapter->open_device_map); |
| spin_unlock(&adapter->work_lock); |
| |
| if (!(adapter->open_device_map & PORT_MASK)) |
| cancel_rearming_delayed_workqueue(cxgb3_wq, |
| &adapter->adap_check_task); |
| |
| if (!adapter->open_device_map) |
| cxgb_down(adapter); |
| |
| return 0; |
| } |
| |
| static struct net_device_stats *cxgb_get_stats(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->priv; |
| struct port_info *p = netdev_priv(dev); |
| struct net_device_stats *ns = &p->netstats; |
| const struct mac_stats *pstats; |
| |
| spin_lock(&adapter->stats_lock); |
| pstats = t3_mac_update_stats(&p->mac); |
| spin_unlock(&adapter->stats_lock); |
| |
| ns->tx_bytes = pstats->tx_octets; |
| ns->tx_packets = pstats->tx_frames; |
| ns->rx_bytes = pstats->rx_octets; |
| ns->rx_packets = pstats->rx_frames; |
| ns->multicast = pstats->rx_mcast_frames; |
| |
| ns->tx_errors = pstats->tx_underrun; |
| ns->rx_errors = pstats->rx_symbol_errs + pstats->rx_fcs_errs + |
| pstats->rx_too_long + pstats->rx_jabber + pstats->rx_short + |
| pstats->rx_fifo_ovfl; |
| |
| /* detailed rx_errors */ |
| ns->rx_length_errors = pstats->rx_jabber + pstats->rx_too_long; |
| ns->rx_over_errors = 0; |
| ns->rx_crc_errors = pstats->rx_fcs_errs; |
| ns->rx_frame_errors = pstats->rx_symbol_errs; |
| ns->rx_fifo_errors = pstats->rx_fifo_ovfl; |
| ns->rx_missed_errors = pstats->rx_cong_drops; |
| |
| /* detailed tx_errors */ |
| ns->tx_aborted_errors = 0; |
| ns->tx_carrier_errors = 0; |
| ns->tx_fifo_errors = pstats->tx_underrun; |
| ns->tx_heartbeat_errors = 0; |
| ns->tx_window_errors = 0; |
| return ns; |
| } |
| |
| static u32 get_msglevel(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| return adapter->msg_enable; |
| } |
| |
| static void set_msglevel(struct net_device *dev, u32 val) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| adapter->msg_enable = val; |
| } |
| |
| static char stats_strings[][ETH_GSTRING_LEN] = { |
| "TxOctetsOK ", |
| "TxFramesOK ", |
| "TxMulticastFramesOK", |
| "TxBroadcastFramesOK", |
| "TxPauseFrames ", |
| "TxUnderrun ", |
| "TxExtUnderrun ", |
| |
| "TxFrames64 ", |
| "TxFrames65To127 ", |
| "TxFrames128To255 ", |
| "TxFrames256To511 ", |
| "TxFrames512To1023 ", |
| "TxFrames1024To1518 ", |
| "TxFrames1519ToMax ", |
| |
| "RxOctetsOK ", |
| "RxFramesOK ", |
| "RxMulticastFramesOK", |
| "RxBroadcastFramesOK", |
| "RxPauseFrames ", |
| "RxFCSErrors ", |
| "RxSymbolErrors ", |
| "RxShortErrors ", |
| "RxJabberErrors ", |
| "RxLengthErrors ", |
| "RxFIFOoverflow ", |
| |
| "RxFrames64 ", |
| "RxFrames65To127 ", |
| "RxFrames128To255 ", |
| "RxFrames256To511 ", |
| "RxFrames512To1023 ", |
| "RxFrames1024To1518 ", |
| "RxFrames1519ToMax ", |
| |
| "PhyFIFOErrors ", |
| "TSO ", |
| "VLANextractions ", |
| "VLANinsertions ", |
| "TxCsumOffload ", |
| "RxCsumGood ", |
| "RxDrops " |
| }; |
| |
| static int get_stats_count(struct net_device *dev) |
| { |
| return ARRAY_SIZE(stats_strings); |
| } |
| |
| #define T3_REGMAP_SIZE (3 * 1024) |
| |
| static int get_regs_len(struct net_device *dev) |
| { |
| return T3_REGMAP_SIZE; |
| } |
| |
| static int get_eeprom_len(struct net_device *dev) |
| { |
| return EEPROMSIZE; |
| } |
| |
| static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
| { |
| u32 fw_vers = 0; |
| struct adapter *adapter = dev->priv; |
| |
| t3_get_fw_version(adapter, &fw_vers); |
| |
| strcpy(info->driver, DRV_NAME); |
| strcpy(info->version, DRV_VERSION); |
| strcpy(info->bus_info, pci_name(adapter->pdev)); |
| if (!fw_vers) |
| strcpy(info->fw_version, "N/A"); |
| else { |
| snprintf(info->fw_version, sizeof(info->fw_version), |
| "%s %u.%u.%u", |
| G_FW_VERSION_TYPE(fw_vers) ? "T" : "N", |
| G_FW_VERSION_MAJOR(fw_vers), |
| G_FW_VERSION_MINOR(fw_vers), |
| G_FW_VERSION_MICRO(fw_vers)); |
| } |
| } |
| |
| static void get_strings(struct net_device *dev, u32 stringset, u8 * data) |
| { |
| if (stringset == ETH_SS_STATS) |
| memcpy(data, stats_strings, sizeof(stats_strings)); |
| } |
| |
| static unsigned long collect_sge_port_stats(struct adapter *adapter, |
| struct port_info *p, int idx) |
| { |
| int i; |
| unsigned long tot = 0; |
| |
| for (i = 0; i < p->nqsets; ++i) |
| tot += adapter->sge.qs[i + p->first_qset].port_stats[idx]; |
| return tot; |
| } |
| |
| static void get_stats(struct net_device *dev, struct ethtool_stats *stats, |
| u64 *data) |
| { |
| struct adapter *adapter = dev->priv; |
| struct port_info *pi = netdev_priv(dev); |
| const struct mac_stats *s; |
| |
| spin_lock(&adapter->stats_lock); |
| s = t3_mac_update_stats(&pi->mac); |
| spin_unlock(&adapter->stats_lock); |
| |
| *data++ = s->tx_octets; |
| *data++ = s->tx_frames; |
| *data++ = s->tx_mcast_frames; |
| *data++ = s->tx_bcast_frames; |
| *data++ = s->tx_pause; |
| *data++ = s->tx_underrun; |
| *data++ = s->tx_fifo_urun; |
| |
| *data++ = s->tx_frames_64; |
| *data++ = s->tx_frames_65_127; |
| *data++ = s->tx_frames_128_255; |
| *data++ = s->tx_frames_256_511; |
| *data++ = s->tx_frames_512_1023; |
| *data++ = s->tx_frames_1024_1518; |
| *data++ = s->tx_frames_1519_max; |
| |
| *data++ = s->rx_octets; |
| *data++ = s->rx_frames; |
| *data++ = s->rx_mcast_frames; |
| *data++ = s->rx_bcast_frames; |
| *data++ = s->rx_pause; |
| *data++ = s->rx_fcs_errs; |
| *data++ = s->rx_symbol_errs; |
| *data++ = s->rx_short; |
| *data++ = s->rx_jabber; |
| *data++ = s->rx_too_long; |
| *data++ = s->rx_fifo_ovfl; |
| |
| *data++ = s->rx_frames_64; |
| *data++ = s->rx_frames_65_127; |
| *data++ = s->rx_frames_128_255; |
| *data++ = s->rx_frames_256_511; |
| *data++ = s->rx_frames_512_1023; |
| *data++ = s->rx_frames_1024_1518; |
| *data++ = s->rx_frames_1519_max; |
| |
| *data++ = pi->phy.fifo_errors; |
| |
| *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_TSO); |
| *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_VLANEX); |
| *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_VLANINS); |
| *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_TX_CSUM); |
| *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_RX_CSUM_GOOD); |
| *data++ = s->rx_cong_drops; |
| } |
| |
| static inline void reg_block_dump(struct adapter *ap, void *buf, |
| unsigned int start, unsigned int end) |
| { |
| u32 *p = buf + start; |
| |
| for (; start <= end; start += sizeof(u32)) |
| *p++ = t3_read_reg(ap, start); |
| } |
| |
| static void get_regs(struct net_device *dev, struct ethtool_regs *regs, |
| void *buf) |
| { |
| struct adapter *ap = dev->priv; |
| |
| /* |
| * Version scheme: |
| * bits 0..9: chip version |
| * bits 10..15: chip revision |
| * bit 31: set for PCIe cards |
| */ |
| regs->version = 3 | (ap->params.rev << 10) | (is_pcie(ap) << 31); |
| |
| /* |
| * We skip the MAC statistics registers because they are clear-on-read. |
| * Also reading multi-register stats would need to synchronize with the |
| * periodic mac stats accumulation. Hard to justify the complexity. |
| */ |
| memset(buf, 0, T3_REGMAP_SIZE); |
| reg_block_dump(ap, buf, 0, A_SG_RSPQ_CREDIT_RETURN); |
| reg_block_dump(ap, buf, A_SG_HI_DRB_HI_THRSH, A_ULPRX_PBL_ULIMIT); |
| reg_block_dump(ap, buf, A_ULPTX_CONFIG, A_MPS_INT_CAUSE); |
| reg_block_dump(ap, buf, A_CPL_SWITCH_CNTRL, A_CPL_MAP_TBL_DATA); |
| reg_block_dump(ap, buf, A_SMB_GLOBAL_TIME_CFG, A_XGM_SERDES_STAT3); |
| reg_block_dump(ap, buf, A_XGM_SERDES_STATUS0, |
| XGM_REG(A_XGM_SERDES_STAT3, 1)); |
| reg_block_dump(ap, buf, XGM_REG(A_XGM_SERDES_STATUS0, 1), |
| XGM_REG(A_XGM_RX_SPI4_SOP_EOP_CNT, 1)); |
| } |
| |
| static int restart_autoneg(struct net_device *dev) |
| { |
| struct port_info *p = netdev_priv(dev); |
| |
| if (!netif_running(dev)) |
| return -EAGAIN; |
| if (p->link_config.autoneg != AUTONEG_ENABLE) |
| return -EINVAL; |
| p->phy.ops->autoneg_restart(&p->phy); |
| return 0; |
| } |
| |
| static int cxgb3_phys_id(struct net_device *dev, u32 data) |
| { |
| int i; |
| struct adapter *adapter = dev->priv; |
| |
| if (data == 0) |
| data = 2; |
| |
| for (i = 0; i < data * 2; i++) { |
| t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, |
| (i & 1) ? F_GPIO0_OUT_VAL : 0); |
| if (msleep_interruptible(500)) |
| break; |
| } |
| t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, |
| F_GPIO0_OUT_VAL); |
| return 0; |
| } |
| |
| static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct port_info *p = netdev_priv(dev); |
| |
| cmd->supported = p->link_config.supported; |
| cmd->advertising = p->link_config.advertising; |
| |
| if (netif_carrier_ok(dev)) { |
| cmd->speed = p->link_config.speed; |
| cmd->duplex = p->link_config.duplex; |
| } else { |
| cmd->speed = -1; |
| cmd->duplex = -1; |
| } |
| |
| cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; |
| cmd->phy_address = p->phy.addr; |
| cmd->transceiver = XCVR_EXTERNAL; |
| cmd->autoneg = p->link_config.autoneg; |
| cmd->maxtxpkt = 0; |
| cmd->maxrxpkt = 0; |
| return 0; |
| } |
| |
| static int speed_duplex_to_caps(int speed, int duplex) |
| { |
| int cap = 0; |
| |
| switch (speed) { |
| case SPEED_10: |
| if (duplex == DUPLEX_FULL) |
| cap = SUPPORTED_10baseT_Full; |
| else |
| cap = SUPPORTED_10baseT_Half; |
| break; |
| case SPEED_100: |
| if (duplex == DUPLEX_FULL) |
| cap = SUPPORTED_100baseT_Full; |
| else |
| cap = SUPPORTED_100baseT_Half; |
| break; |
| case SPEED_1000: |
| if (duplex == DUPLEX_FULL) |
| cap = SUPPORTED_1000baseT_Full; |
| else |
| cap = SUPPORTED_1000baseT_Half; |
| break; |
| case SPEED_10000: |
| if (duplex == DUPLEX_FULL) |
| cap = SUPPORTED_10000baseT_Full; |
| } |
| return cap; |
| } |
| |
| #define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ |
| ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ |
| ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \ |
| ADVERTISED_10000baseT_Full) |
| |
| static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct port_info *p = netdev_priv(dev); |
| struct link_config *lc = &p->link_config; |
| |
| if (!(lc->supported & SUPPORTED_Autoneg)) |
| return -EOPNOTSUPP; /* can't change speed/duplex */ |
| |
| if (cmd->autoneg == AUTONEG_DISABLE) { |
| int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex); |
| |
| if (!(lc->supported & cap) || cmd->speed == SPEED_1000) |
| return -EINVAL; |
| lc->requested_speed = cmd->speed; |
| lc->requested_duplex = cmd->duplex; |
| lc->advertising = 0; |
| } else { |
| cmd->advertising &= ADVERTISED_MASK; |
| cmd->advertising &= lc->supported; |
| if (!cmd->advertising) |
| return -EINVAL; |
| lc->requested_speed = SPEED_INVALID; |
| lc->requested_duplex = DUPLEX_INVALID; |
| lc->advertising = cmd->advertising | ADVERTISED_Autoneg; |
| } |
| lc->autoneg = cmd->autoneg; |
| if (netif_running(dev)) |
| t3_link_start(&p->phy, &p->mac, lc); |
| return 0; |
| } |
| |
| static void get_pauseparam(struct net_device *dev, |
| struct ethtool_pauseparam *epause) |
| { |
| struct port_info *p = netdev_priv(dev); |
| |
| epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0; |
| epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0; |
| epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0; |
| } |
| |
| static int set_pauseparam(struct net_device *dev, |
| struct ethtool_pauseparam *epause) |
| { |
| struct port_info *p = netdev_priv(dev); |
| struct link_config *lc = &p->link_config; |
| |
| if (epause->autoneg == AUTONEG_DISABLE) |
| lc->requested_fc = 0; |
| else if (lc->supported & SUPPORTED_Autoneg) |
| lc->requested_fc = PAUSE_AUTONEG; |
| else |
| return -EINVAL; |
| |
| if (epause->rx_pause) |
| lc->requested_fc |= PAUSE_RX; |
| if (epause->tx_pause) |
| lc->requested_fc |= PAUSE_TX; |
| if (lc->autoneg == AUTONEG_ENABLE) { |
| if (netif_running(dev)) |
| t3_link_start(&p->phy, &p->mac, lc); |
| } else { |
| lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); |
| if (netif_running(dev)) |
| t3_mac_set_speed_duplex_fc(&p->mac, -1, -1, lc->fc); |
| } |
| return 0; |
| } |
| |
| static u32 get_rx_csum(struct net_device *dev) |
| { |
| struct port_info *p = netdev_priv(dev); |
| |
| return p->rx_csum_offload; |
| } |
| |
| static int set_rx_csum(struct net_device *dev, u32 data) |
| { |
| struct port_info *p = netdev_priv(dev); |
| |
| p->rx_csum_offload = data; |
| return 0; |
| } |
| |
| static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| e->rx_max_pending = MAX_RX_BUFFERS; |
| e->rx_mini_max_pending = 0; |
| e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS; |
| e->tx_max_pending = MAX_TXQ_ENTRIES; |
| |
| e->rx_pending = adapter->params.sge.qset[0].fl_size; |
| e->rx_mini_pending = adapter->params.sge.qset[0].rspq_size; |
| e->rx_jumbo_pending = adapter->params.sge.qset[0].jumbo_size; |
| e->tx_pending = adapter->params.sge.qset[0].txq_size[0]; |
| } |
| |
| static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) |
| { |
| int i; |
| struct adapter *adapter = dev->priv; |
| |
| if (e->rx_pending > MAX_RX_BUFFERS || |
| e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS || |
| e->tx_pending > MAX_TXQ_ENTRIES || |
| e->rx_mini_pending > MAX_RSPQ_ENTRIES || |
| e->rx_mini_pending < MIN_RSPQ_ENTRIES || |
| e->rx_pending < MIN_FL_ENTRIES || |
| e->rx_jumbo_pending < MIN_FL_ENTRIES || |
| e->tx_pending < adapter->params.nports * MIN_TXQ_ENTRIES) |
| return -EINVAL; |
| |
| if (adapter->flags & FULL_INIT_DONE) |
| return -EBUSY; |
| |
| for (i = 0; i < SGE_QSETS; ++i) { |
| struct qset_params *q = &adapter->params.sge.qset[i]; |
| |
| q->rspq_size = e->rx_mini_pending; |
| q->fl_size = e->rx_pending; |
| q->jumbo_size = e->rx_jumbo_pending; |
| q->txq_size[0] = e->tx_pending; |
| q->txq_size[1] = e->tx_pending; |
| q->txq_size[2] = e->tx_pending; |
| } |
| return 0; |
| } |
| |
| static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) |
| { |
| struct adapter *adapter = dev->priv; |
| struct qset_params *qsp = &adapter->params.sge.qset[0]; |
| struct sge_qset *qs = &adapter->sge.qs[0]; |
| |
| if (c->rx_coalesce_usecs * 10 > M_NEWTIMER) |
| return -EINVAL; |
| |
| qsp->coalesce_usecs = c->rx_coalesce_usecs; |
| t3_update_qset_coalesce(qs, qsp); |
| return 0; |
| } |
| |
| static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) |
| { |
| struct adapter *adapter = dev->priv; |
| struct qset_params *q = adapter->params.sge.qset; |
| |
| c->rx_coalesce_usecs = q->coalesce_usecs; |
| return 0; |
| } |
| |
| static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e, |
| u8 * data) |
| { |
| int i, err = 0; |
| struct adapter *adapter = dev->priv; |
| |
| u8 *buf = kmalloc(EEPROMSIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| e->magic = EEPROM_MAGIC; |
| for (i = e->offset & ~3; !err && i < e->offset + e->len; i += 4) |
| err = t3_seeprom_read(adapter, i, (u32 *) & buf[i]); |
| |
| if (!err) |
| memcpy(data, buf + e->offset, e->len); |
| kfree(buf); |
| return err; |
| } |
| |
| static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, |
| u8 * data) |
| { |
| u8 *buf; |
| int err = 0; |
| u32 aligned_offset, aligned_len, *p; |
| struct adapter *adapter = dev->priv; |
| |
| if (eeprom->magic != EEPROM_MAGIC) |
| return -EINVAL; |
| |
| aligned_offset = eeprom->offset & ~3; |
| aligned_len = (eeprom->len + (eeprom->offset & 3) + 3) & ~3; |
| |
| if (aligned_offset != eeprom->offset || aligned_len != eeprom->len) { |
| buf = kmalloc(aligned_len, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| err = t3_seeprom_read(adapter, aligned_offset, (u32 *) buf); |
| if (!err && aligned_len > 4) |
| err = t3_seeprom_read(adapter, |
| aligned_offset + aligned_len - 4, |
| (u32 *) & buf[aligned_len - 4]); |
| if (err) |
| goto out; |
| memcpy(buf + (eeprom->offset & 3), data, eeprom->len); |
| } else |
| buf = data; |
| |
| err = t3_seeprom_wp(adapter, 0); |
| if (err) |
| goto out; |
| |
| for (p = (u32 *) buf; !err && aligned_len; aligned_len -= 4, p++) { |
| err = t3_seeprom_write(adapter, aligned_offset, *p); |
| aligned_offset += 4; |
| } |
| |
| if (!err) |
| err = t3_seeprom_wp(adapter, 1); |
| out: |
| if (buf != data) |
| kfree(buf); |
| return err; |
| } |
| |
| static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) |
| { |
| wol->supported = 0; |
| wol->wolopts = 0; |
| memset(&wol->sopass, 0, sizeof(wol->sopass)); |
| } |
| |
| static const struct ethtool_ops cxgb_ethtool_ops = { |
| .get_settings = get_settings, |
| .set_settings = set_settings, |
| .get_drvinfo = get_drvinfo, |
| .get_msglevel = get_msglevel, |
| .set_msglevel = set_msglevel, |
| .get_ringparam = get_sge_param, |
| .set_ringparam = set_sge_param, |
| .get_coalesce = get_coalesce, |
| .set_coalesce = set_coalesce, |
| .get_eeprom_len = get_eeprom_len, |
| .get_eeprom = get_eeprom, |
| .set_eeprom = set_eeprom, |
| .get_pauseparam = get_pauseparam, |
| .set_pauseparam = set_pauseparam, |
| .get_rx_csum = get_rx_csum, |
| .set_rx_csum = set_rx_csum, |
| .get_tx_csum = ethtool_op_get_tx_csum, |
| .set_tx_csum = ethtool_op_set_tx_csum, |
| .get_sg = ethtool_op_get_sg, |
| .set_sg = ethtool_op_set_sg, |
| .get_link = ethtool_op_get_link, |
| .get_strings = get_strings, |
| .phys_id = cxgb3_phys_id, |
| .nway_reset = restart_autoneg, |
| .get_stats_count = get_stats_count, |
| .get_ethtool_stats = get_stats, |
| .get_regs_len = get_regs_len, |
| .get_regs = get_regs, |
| .get_wol = get_wol, |
| .get_tso = ethtool_op_get_tso, |
| .set_tso = ethtool_op_set_tso, |
| .get_perm_addr = ethtool_op_get_perm_addr |
| }; |
| |
| static int in_range(int val, int lo, int hi) |
| { |
| return val < 0 || (val <= hi && val >= lo); |
| } |
| |
| static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr) |
| { |
| int ret; |
| u32 cmd; |
| struct adapter *adapter = dev->priv; |
| |
| if (copy_from_user(&cmd, useraddr, sizeof(cmd))) |
| return -EFAULT; |
| |
| switch (cmd) { |
| case CHELSIO_SET_QSET_PARAMS:{ |
| int i; |
| struct qset_params *q; |
| struct ch_qset_params t; |
| |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| if (copy_from_user(&t, useraddr, sizeof(t))) |
| return -EFAULT; |
| if (t.qset_idx >= SGE_QSETS) |
| return -EINVAL; |
| if (!in_range(t.intr_lat, 0, M_NEWTIMER) || |
| !in_range(t.cong_thres, 0, 255) || |
| !in_range(t.txq_size[0], MIN_TXQ_ENTRIES, |
| MAX_TXQ_ENTRIES) || |
| !in_range(t.txq_size[1], MIN_TXQ_ENTRIES, |
| MAX_TXQ_ENTRIES) || |
| !in_range(t.txq_size[2], MIN_CTRL_TXQ_ENTRIES, |
| MAX_CTRL_TXQ_ENTRIES) || |
| !in_range(t.fl_size[0], MIN_FL_ENTRIES, |
| MAX_RX_BUFFERS) |
| || !in_range(t.fl_size[1], MIN_FL_ENTRIES, |
| MAX_RX_JUMBO_BUFFERS) |
| || !in_range(t.rspq_size, MIN_RSPQ_ENTRIES, |
| MAX_RSPQ_ENTRIES)) |
| return -EINVAL; |
| if ((adapter->flags & FULL_INIT_DONE) && |
| (t.rspq_size >= 0 || t.fl_size[0] >= 0 || |
| t.fl_size[1] >= 0 || t.txq_size[0] >= 0 || |
| t.txq_size[1] >= 0 || t.txq_size[2] >= 0 || |
| t.polling >= 0 || t.cong_thres >= 0)) |
| return -EBUSY; |
| |
| q = &adapter->params.sge.qset[t.qset_idx]; |
| |
| if (t.rspq_size >= 0) |
| q->rspq_size = t.rspq_size; |
| if (t.fl_size[0] >= 0) |
| q->fl_size = t.fl_size[0]; |
| if (t.fl_size[1] >= 0) |
| q->jumbo_size = t.fl_size[1]; |
| if (t.txq_size[0] >= 0) |
| q->txq_size[0] = t.txq_size[0]; |
| if (t.txq_size[1] >= 0) |
| q->txq_size[1] = t.txq_size[1]; |
| if (t.txq_size[2] >= 0) |
| q->txq_size[2] = t.txq_size[2]; |
| if (t.cong_thres >= 0) |
| q->cong_thres = t.cong_thres; |
| if (t.intr_lat >= 0) { |
| struct sge_qset *qs = |
| &adapter->sge.qs[t.qset_idx]; |
| |
| q->coalesce_usecs = t.intr_lat; |
| t3_update_qset_coalesce(qs, q); |
| } |
| if (t.polling >= 0) { |
| if (adapter->flags & USING_MSIX) |
| q->polling = t.polling; |
| else { |
| /* No polling with INTx for T3A */ |
| if (adapter->params.rev == 0 && |
| !(adapter->flags & USING_MSI)) |
| t.polling = 0; |
| |
| for (i = 0; i < SGE_QSETS; i++) { |
| q = &adapter->params.sge. |
| qset[i]; |
| q->polling = t.polling; |
| } |
| } |
| } |
| break; |
| } |
| case CHELSIO_GET_QSET_PARAMS:{ |
| struct qset_params *q; |
| struct ch_qset_params t; |
| |
| if (copy_from_user(&t, useraddr, sizeof(t))) |
| return -EFAULT; |
| if (t.qset_idx >= SGE_QSETS) |
| return -EINVAL; |
| |
| q = &adapter->params.sge.qset[t.qset_idx]; |
| t.rspq_size = q->rspq_size; |
| t.txq_size[0] = q->txq_size[0]; |
| t.txq_size[1] = q->txq_size[1]; |
| t.txq_size[2] = q->txq_size[2]; |
| t.fl_size[0] = q->fl_size; |
| t.fl_size[1] = q->jumbo_size; |
| t.polling = q->polling; |
| t.intr_lat = q->coalesce_usecs; |
| t.cong_thres = q->cong_thres; |
| |
| if (copy_to_user(useraddr, &t, sizeof(t))) |
| return -EFAULT; |
| break; |
| } |
| case CHELSIO_SET_QSET_NUM:{ |
| struct ch_reg edata; |
| struct port_info *pi = netdev_priv(dev); |
| unsigned int i, first_qset = 0, other_qsets = 0; |
| |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| if (adapter->flags & FULL_INIT_DONE) |
| return -EBUSY; |
| if (copy_from_user(&edata, useraddr, sizeof(edata))) |
| return -EFAULT; |
| if (edata.val < 1 || |
| (edata.val > 1 && !(adapter->flags & USING_MSIX))) |
| return -EINVAL; |
| |
| for_each_port(adapter, i) |
| if (adapter->port[i] && adapter->port[i] != dev) |
| other_qsets += adap2pinfo(adapter, i)->nqsets; |
| |
| if (edata.val + other_qsets > SGE_QSETS) |
| return -EINVAL; |
| |
| pi->nqsets = edata.val; |
| |
| for_each_port(adapter, i) |
| if (adapter->port[i]) { |
| pi = adap2pinfo(adapter, i); |
| pi->first_qset = first_qset; |
| first_qset += pi->nqsets; |
| } |
| break; |
| } |
| case CHELSIO_GET_QSET_NUM:{ |
| struct ch_reg edata; |
| struct port_info *pi = netdev_priv(dev); |
| |
| edata.cmd = CHELSIO_GET_QSET_NUM; |
| edata.val = pi->nqsets; |
| if (copy_to_user(useraddr, &edata, sizeof(edata))) |
| return -EFAULT; |
| break; |
| } |
| case CHELSIO_LOAD_FW:{ |
| u8 *fw_data; |
| struct ch_mem_range t; |
| |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| if (copy_from_user(&t, useraddr, sizeof(t))) |
| return -EFAULT; |
| |
| fw_data = kmalloc(t.len, GFP_KERNEL); |
| if (!fw_data) |
| return -ENOMEM; |
| |
| if (copy_from_user |
| (fw_data, useraddr + sizeof(t), t.len)) { |
| kfree(fw_data); |
| return -EFAULT; |
| } |
| |
| ret = t3_load_fw(adapter, fw_data, t.len); |
| kfree(fw_data); |
| if (ret) |
| return ret; |
| break; |
| } |
| case CHELSIO_SETMTUTAB:{ |
| struct ch_mtus m; |
| int i; |
| |
| if (!is_offload(adapter)) |
| return -EOPNOTSUPP; |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| if (offload_running(adapter)) |
| return -EBUSY; |
| if (copy_from_user(&m, useraddr, sizeof(m))) |
| return -EFAULT; |
| if (m.nmtus != NMTUS) |
| return -EINVAL; |
| if (m.mtus[0] < 81) /* accommodate SACK */ |
| return -EINVAL; |
| |
| /* MTUs must be in ascending order */ |
| for (i = 1; i < NMTUS; ++i) |
| if (m.mtus[i] < m.mtus[i - 1]) |
| return -EINVAL; |
| |
| memcpy(adapter->params.mtus, m.mtus, |
| sizeof(adapter->params.mtus)); |
| break; |
| } |
| case CHELSIO_GET_PM:{ |
| struct tp_params *p = &adapter->params.tp; |
| struct ch_pm m = {.cmd = CHELSIO_GET_PM }; |
| |
| if (!is_offload(adapter)) |
| return -EOPNOTSUPP; |
| m.tx_pg_sz = p->tx_pg_size; |
| m.tx_num_pg = p->tx_num_pgs; |
| m.rx_pg_sz = p->rx_pg_size; |
| m.rx_num_pg = p->rx_num_pgs; |
| m.pm_total = p->pmtx_size + p->chan_rx_size * p->nchan; |
| if (copy_to_user(useraddr, &m, sizeof(m))) |
| return -EFAULT; |
| break; |
| } |
| case CHELSIO_SET_PM:{ |
| struct ch_pm m; |
| struct tp_params *p = &adapter->params.tp; |
| |
| if (!is_offload(adapter)) |
| return -EOPNOTSUPP; |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| if (adapter->flags & FULL_INIT_DONE) |
| return -EBUSY; |
| if (copy_from_user(&m, useraddr, sizeof(m))) |
| return -EFAULT; |
| if (!m.rx_pg_sz || (m.rx_pg_sz & (m.rx_pg_sz - 1)) || |
| !m.tx_pg_sz || (m.tx_pg_sz & (m.tx_pg_sz - 1))) |
| return -EINVAL; /* not power of 2 */ |
| if (!(m.rx_pg_sz & 0x14000)) |
| return -EINVAL; /* not 16KB or 64KB */ |
| if (!(m.tx_pg_sz & 0x1554000)) |
| return -EINVAL; |
| if (m.tx_num_pg == -1) |
| m.tx_num_pg = p->tx_num_pgs; |
| if (m.rx_num_pg == -1) |
| m.rx_num_pg = p->rx_num_pgs; |
| if (m.tx_num_pg % 24 || m.rx_num_pg % 24) |
| return -EINVAL; |
| if (m.rx_num_pg * m.rx_pg_sz > p->chan_rx_size || |
| m.tx_num_pg * m.tx_pg_sz > p->chan_tx_size) |
| return -EINVAL; |
| p->rx_pg_size = m.rx_pg_sz; |
| p->tx_pg_size = m.tx_pg_sz; |
| p->rx_num_pgs = m.rx_num_pg; |
| p->tx_num_pgs = m.tx_num_pg; |
| break; |
| } |
| case CHELSIO_GET_MEM:{ |
| struct ch_mem_range t; |
| struct mc7 *mem; |
| u64 buf[32]; |
| |
| if (!is_offload(adapter)) |
| return -EOPNOTSUPP; |
| if (!(adapter->flags & FULL_INIT_DONE)) |
| return -EIO; /* need the memory controllers */ |
| if (copy_from_user(&t, useraddr, sizeof(t))) |
| return -EFAULT; |
| if ((t.addr & 7) || (t.len & 7)) |
| return -EINVAL; |
| if (t.mem_id == MEM_CM) |
| mem = &adapter->cm; |
| else if (t.mem_id == MEM_PMRX) |
| mem = &adapter->pmrx; |
| else if (t.mem_id == MEM_PMTX) |
| mem = &adapter->pmtx; |
| else |
| return -EINVAL; |
| |
| /* |
| * Version scheme: |
| * bits 0..9: chip version |
| * bits 10..15: chip revision |
| */ |
| t.version = 3 | (adapter->params.rev << 10); |
| if (copy_to_user(useraddr, &t, sizeof(t))) |
| return -EFAULT; |
| |
| /* |
| * Read 256 bytes at a time as len can be large and we don't |
| * want to use huge intermediate buffers. |
| */ |
| useraddr += sizeof(t); /* advance to start of buffer */ |
| while (t.len) { |
| unsigned int chunk = |
| min_t(unsigned int, t.len, sizeof(buf)); |
| |
| ret = |
| t3_mc7_bd_read(mem, t.addr / 8, chunk / 8, |
| buf); |
| if (ret) |
| return ret; |
| if (copy_to_user(useraddr, buf, chunk)) |
| return -EFAULT; |
| useraddr += chunk; |
| t.addr += chunk; |
| t.len -= chunk; |
| } |
| break; |
| } |
| case CHELSIO_SET_TRACE_FILTER:{ |
| struct ch_trace t; |
| const struct trace_params *tp; |
| |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| if (!offload_running(adapter)) |
| return -EAGAIN; |
| if (copy_from_user(&t, useraddr, sizeof(t))) |
| return -EFAULT; |
| |
| tp = (const struct trace_params *)&t.sip; |
| if (t.config_tx) |
| t3_config_trace_filter(adapter, tp, 0, |
| t.invert_match, |
| t.trace_tx); |
| if (t.config_rx) |
| t3_config_trace_filter(adapter, tp, 1, |
| t.invert_match, |
| t.trace_rx); |
| break; |
| } |
| default: |
| return -EOPNOTSUPP; |
| } |
| return 0; |
| } |
| |
| static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd) |
| { |
| int ret, mmd; |
| struct adapter *adapter = dev->priv; |
| struct port_info *pi = netdev_priv(dev); |
| struct mii_ioctl_data *data = if_mii(req); |
| |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| data->phy_id = pi->phy.addr; |
| /* FALLTHRU */ |
| case SIOCGMIIREG:{ |
| u32 val; |
| struct cphy *phy = &pi->phy; |
| |
| if (!phy->mdio_read) |
| return -EOPNOTSUPP; |
| if (is_10G(adapter)) { |
| mmd = data->phy_id >> 8; |
| if (!mmd) |
| mmd = MDIO_DEV_PCS; |
| else if (mmd > MDIO_DEV_XGXS) |
| return -EINVAL; |
| |
| ret = |
| phy->mdio_read(adapter, data->phy_id & 0x1f, |
| mmd, data->reg_num, &val); |
| } else |
| ret = |
| phy->mdio_read(adapter, data->phy_id & 0x1f, |
| 0, data->reg_num & 0x1f, |
| &val); |
| if (!ret) |
| data->val_out = val; |
| break; |
| } |
| case SIOCSMIIREG:{ |
| struct cphy *phy = &pi->phy; |
| |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| if (!phy->mdio_write) |
| return -EOPNOTSUPP; |
| if (is_10G(adapter)) { |
| mmd = data->phy_id >> 8; |
| if (!mmd) |
| mmd = MDIO_DEV_PCS; |
| else if (mmd > MDIO_DEV_XGXS) |
| return -EINVAL; |
| |
| ret = |
| phy->mdio_write(adapter, |
| data->phy_id & 0x1f, mmd, |
| data->reg_num, |
| data->val_in); |
| } else |
| ret = |
| phy->mdio_write(adapter, |
| data->phy_id & 0x1f, 0, |
| data->reg_num & 0x1f, |
| data->val_in); |
| break; |
| } |
| case SIOCCHIOCTL: |
| return cxgb_extension_ioctl(dev, req->ifr_data); |
| default: |
| return -EOPNOTSUPP; |
| } |
| return ret; |
| } |
| |
| static int cxgb_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| int ret; |
| struct adapter *adapter = dev->priv; |
| struct port_info *pi = netdev_priv(dev); |
| |
| if (new_mtu < 81) /* accommodate SACK */ |
| return -EINVAL; |
| if ((ret = t3_mac_set_mtu(&pi->mac, new_mtu))) |
| return ret; |
| dev->mtu = new_mtu; |
| init_port_mtus(adapter); |
| if (adapter->params.rev == 0 && offload_running(adapter)) |
| t3_load_mtus(adapter, adapter->params.mtus, |
| adapter->params.a_wnd, adapter->params.b_wnd, |
| adapter->port[0]->mtu); |
| return 0; |
| } |
| |
| static int cxgb_set_mac_addr(struct net_device *dev, void *p) |
| { |
| struct adapter *adapter = dev->priv; |
| struct port_info *pi = netdev_priv(dev); |
| struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EINVAL; |
| |
| memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); |
| t3_mac_set_address(&pi->mac, 0, dev->dev_addr); |
| if (offload_running(adapter)) |
| write_smt_entry(adapter, pi->port_id); |
| return 0; |
| } |
| |
| /** |
| * t3_synchronize_rx - wait for current Rx processing on a port to complete |
| * @adap: the adapter |
| * @p: the port |
| * |
| * Ensures that current Rx processing on any of the queues associated with |
| * the given port completes before returning. We do this by acquiring and |
| * releasing the locks of the response queues associated with the port. |
| */ |
| static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p) |
| { |
| int i; |
| |
| for (i = 0; i < p->nqsets; i++) { |
| struct sge_rspq *q = &adap->sge.qs[i + p->first_qset].rspq; |
| |
| spin_lock_irq(&q->lock); |
| spin_unlock_irq(&q->lock); |
| } |
| } |
| |
| static void vlan_rx_register(struct net_device *dev, struct vlan_group *grp) |
| { |
| struct adapter *adapter = dev->priv; |
| struct port_info *pi = netdev_priv(dev); |
| |
| pi->vlan_grp = grp; |
| if (adapter->params.rev > 0) |
| t3_set_vlan_accel(adapter, 1 << pi->port_id, grp != NULL); |
| else { |
| /* single control for all ports */ |
| unsigned int i, have_vlans = 0; |
| for_each_port(adapter, i) |
| have_vlans |= adap2pinfo(adapter, i)->vlan_grp != NULL; |
| |
| t3_set_vlan_accel(adapter, 1, have_vlans); |
| } |
| t3_synchronize_rx(adapter, pi); |
| } |
| |
| static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) |
| { |
| /* nothing */ |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void cxgb_netpoll(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->priv; |
| struct sge_qset *qs = dev2qset(dev); |
| |
| t3_intr_handler(adapter, qs->rspq.polling) (adapter->pdev->irq, |
| adapter); |
| } |
| #endif |
| |
| /* |
| * Periodic accumulation of MAC statistics. |
| */ |
| static void mac_stats_update(struct adapter *adapter) |
| { |
| int i; |
| |
| for_each_port(adapter, i) { |
| struct net_device *dev = adapter->port[i]; |
| struct port_info *p = netdev_priv(dev); |
| |
| if (netif_running(dev)) { |
| spin_lock(&adapter->stats_lock); |
| t3_mac_update_stats(&p->mac); |
| spin_unlock(&adapter->stats_lock); |
| } |
| } |
| } |
| |
| static void check_link_status(struct adapter *adapter) |
| { |
| int i; |
| |
| for_each_port(adapter, i) { |
| struct net_device *dev = adapter->port[i]; |
| struct port_info *p = netdev_priv(dev); |
| |
| if (!(p->port_type->caps & SUPPORTED_IRQ) && netif_running(dev)) |
| t3_link_changed(adapter, i); |
| } |
| } |
| |
| static void t3_adap_check_task(struct work_struct *work) |
| { |
| struct adapter *adapter = container_of(work, struct adapter, |
| adap_check_task.work); |
| const struct adapter_params *p = &adapter->params; |
| |
| adapter->check_task_cnt++; |
| |
| /* Check link status for PHYs without interrupts */ |
| if (p->linkpoll_period) |
| check_link_status(adapter); |
| |
| /* Accumulate MAC stats if needed */ |
| if (!p->linkpoll_period || |
| (adapter->check_task_cnt * p->linkpoll_period) / 10 >= |
| p->stats_update_period) { |
| mac_stats_update(adapter); |
| adapter->check_task_cnt = 0; |
| } |
| |
| /* Schedule the next check update if any port is active. */ |
| spin_lock(&adapter->work_lock); |
| if (adapter->open_device_map & PORT_MASK) |
| schedule_chk_task(adapter); |
| spin_unlock(&adapter->work_lock); |
| } |
| |
| /* |
| * Processes external (PHY) interrupts in process context. |
| */ |
| static void ext_intr_task(struct work_struct *work) |
| { |
| struct adapter *adapter = container_of(work, struct adapter, |
| ext_intr_handler_task); |
| |
| t3_phy_intr_handler(adapter); |
| |
| /* Now reenable external interrupts */ |
| spin_lock_irq(&adapter->work_lock); |
| if (adapter->slow_intr_mask) { |
| adapter->slow_intr_mask |= F_T3DBG; |
| t3_write_reg(adapter, A_PL_INT_CAUSE0, F_T3DBG); |
| t3_write_reg(adapter, A_PL_INT_ENABLE0, |
| adapter->slow_intr_mask); |
| } |
| spin_unlock_irq(&adapter->work_lock); |
| } |
| |
| /* |
| * Interrupt-context handler for external (PHY) interrupts. |
| */ |
| void t3_os_ext_intr_handler(struct adapter *adapter) |
| { |
| /* |
| * Schedule a task to handle external interrupts as they may be slow |
| * and we use a mutex to protect MDIO registers. We disable PHY |
| * interrupts in the meantime and let the task reenable them when |
| * it's done. |
| */ |
| spin_lock(&adapter->work_lock); |
| if (adapter->slow_intr_mask) { |
| adapter->slow_intr_mask &= ~F_T3DBG; |
| t3_write_reg(adapter, A_PL_INT_ENABLE0, |
| adapter->slow_intr_mask); |
| queue_work(cxgb3_wq, &adapter->ext_intr_handler_task); |
| } |
| spin_unlock(&adapter->work_lock); |
| } |
| |
| void t3_fatal_err(struct adapter *adapter) |
| { |
| unsigned int fw_status[4]; |
| |
| if (adapter->flags & FULL_INIT_DONE) { |
| t3_sge_stop(adapter); |
| t3_intr_disable(adapter); |
| } |
| CH_ALERT(adapter, "encountered fatal error, operation suspended\n"); |
| if (!t3_cim_ctl_blk_read(adapter, 0xa0, 4, fw_status)) |
| CH_ALERT(adapter, "FW status: 0x%x, 0x%x, 0x%x, 0x%x\n", |
| fw_status[0], fw_status[1], |
| fw_status[2], fw_status[3]); |
| |
| } |
| |
| static int __devinit cxgb_enable_msix(struct adapter *adap) |
| { |
| struct msix_entry entries[SGE_QSETS + 1]; |
| int i, err; |
| |
| for (i = 0; i < ARRAY_SIZE(entries); ++i) |
| entries[i].entry = i; |
| |
| err = pci_enable_msix(adap->pdev, entries, ARRAY_SIZE(entries)); |
| if (!err) { |
| for (i = 0; i < ARRAY_SIZE(entries); ++i) |
| adap->msix_info[i].vec = entries[i].vector; |
| } else if (err > 0) |
| dev_info(&adap->pdev->dev, |
| "only %d MSI-X vectors left, not using MSI-X\n", err); |
| return err; |
| } |
| |
| static void __devinit print_port_info(struct adapter *adap, |
| const struct adapter_info *ai) |
| { |
| static const char *pci_variant[] = { |
| "PCI", "PCI-X", "PCI-X ECC", "PCI-X 266", "PCI Express" |
| }; |
| |
| int i; |
| char buf[80]; |
| |
| if (is_pcie(adap)) |
| snprintf(buf, sizeof(buf), "%s x%d", |
| pci_variant[adap->params.pci.variant], |
| adap->params.pci.width); |
| else |
| snprintf(buf, sizeof(buf), "%s %dMHz/%d-bit", |
| pci_variant[adap->params.pci.variant], |
| adap->params.pci.speed, adap->params.pci.width); |
| |
| for_each_port(adap, i) { |
| struct net_device *dev = adap->port[i]; |
| const struct port_info *pi = netdev_priv(dev); |
| |
| if (!test_bit(i, &adap->registered_device_map)) |
| continue; |
| printk(KERN_INFO "%s: %s %s RNIC (rev %d) %s%s\n", |
| dev->name, ai->desc, pi->port_type->desc, |
| adap->params.rev, buf, |
| (adap->flags & USING_MSIX) ? " MSI-X" : |
| (adap->flags & USING_MSI) ? " MSI" : ""); |
| if (adap->name == dev->name && adap->params.vpd.mclk) |
| printk(KERN_INFO "%s: %uMB CM, %uMB PMTX, %uMB PMRX\n", |
| adap->name, t3_mc7_size(&adap->cm) >> 20, |
| t3_mc7_size(&adap->pmtx) >> 20, |
| t3_mc7_size(&adap->pmrx) >> 20); |
| } |
| } |
| |
| static int __devinit init_one(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| static int version_printed; |
| |
| int i, err, pci_using_dac = 0; |
| unsigned long mmio_start, mmio_len; |
| const struct adapter_info *ai; |
| struct adapter *adapter = NULL; |
| struct port_info *pi; |
| |
| if (!version_printed) { |
| printk(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION); |
| ++version_printed; |
| } |
| |
| if (!cxgb3_wq) { |
| cxgb3_wq = create_singlethread_workqueue(DRV_NAME); |
| if (!cxgb3_wq) { |
| printk(KERN_ERR DRV_NAME |
| ": cannot initialize work queue\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| err = pci_request_regions(pdev, DRV_NAME); |
| if (err) { |
| /* Just info, some other driver may have claimed the device. */ |
| dev_info(&pdev->dev, "cannot obtain PCI resources\n"); |
| return err; |
| } |
| |
| err = pci_enable_device(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "cannot enable PCI device\n"); |
| goto out_release_regions; |
| } |
| |
| if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { |
| pci_using_dac = 1; |
| err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); |
| if (err) { |
| dev_err(&pdev->dev, "unable to obtain 64-bit DMA for " |
| "coherent allocations\n"); |
| goto out_disable_device; |
| } |
| } else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) { |
| dev_err(&pdev->dev, "no usable DMA configuration\n"); |
| goto out_disable_device; |
| } |
| |
| pci_set_master(pdev); |
| |
| mmio_start = pci_resource_start(pdev, 0); |
| mmio_len = pci_resource_len(pdev, 0); |
| ai = t3_get_adapter_info(ent->driver_data); |
| |
| adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); |
| if (!adapter) { |
| err = -ENOMEM; |
| goto out_disable_device; |
| } |
| |
| adapter->regs = ioremap_nocache(mmio_start, mmio_len); |
| if (!adapter->regs) { |
| dev_err(&pdev->dev, "cannot map device registers\n"); |
| err = -ENOMEM; |
| goto out_free_adapter; |
| } |
| |
| adapter->pdev = pdev; |
| adapter->name = pci_name(pdev); |
| adapter->msg_enable = dflt_msg_enable; |
| adapter->mmio_len = mmio_len; |
| |
| mutex_init(&adapter->mdio_lock); |
| spin_lock_init(&adapter->work_lock); |
| spin_lock_init(&adapter->stats_lock); |
| |
| INIT_LIST_HEAD(&adapter->adapter_list); |
| INIT_WORK(&adapter->ext_intr_handler_task, ext_intr_task); |
| INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task); |
| |
| for (i = 0; i < ai->nports; ++i) { |
| struct net_device *netdev; |
| |
| netdev = alloc_etherdev(sizeof(struct port_info)); |
| if (!netdev) { |
| err = -ENOMEM; |
| goto out_free_dev; |
| } |
| |
| SET_MODULE_OWNER(netdev); |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| adapter->port[i] = netdev; |
| pi = netdev_priv(netdev); |
| pi->rx_csum_offload = 1; |
| pi->nqsets = 1; |
| pi->first_qset = i; |
| pi->activity = 0; |
| pi->port_id = i; |
| netif_carrier_off(netdev); |
| netdev->irq = pdev->irq; |
| netdev->mem_start = mmio_start; |
| netdev->mem_end = mmio_start + mmio_len - 1; |
| netdev->priv = adapter; |
| netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO; |
| netdev->features |= NETIF_F_LLTX; |
| if (pci_using_dac) |
| netdev->features |= NETIF_F_HIGHDMA; |
| |
| netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; |
| netdev->vlan_rx_register = vlan_rx_register; |
| netdev->vlan_rx_kill_vid = vlan_rx_kill_vid; |
| |
| netdev->open = cxgb_open; |
| netdev->stop = cxgb_close; |
| netdev->hard_start_xmit = t3_eth_xmit; |
| netdev->get_stats = cxgb_get_stats; |
| netdev->set_multicast_list = cxgb_set_rxmode; |
| netdev->do_ioctl = cxgb_ioctl; |
| netdev->change_mtu = cxgb_change_mtu; |
| netdev->set_mac_address = cxgb_set_mac_addr; |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| netdev->poll_controller = cxgb_netpoll; |
| #endif |
| netdev->weight = 64; |
| |
| SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops); |
| } |
| |
| pci_set_drvdata(pdev, adapter->port[0]); |
| if (t3_prep_adapter(adapter, ai, 1) < 0) { |
| err = -ENODEV; |
| goto out_free_dev; |
| } |
| |
| /* |
| * The card is now ready to go. If any errors occur during device |
| * registration we do not fail the whole card but rather proceed only |
| * with the ports we manage to register successfully. However we must |
| * register at least one net device. |
| */ |
| for_each_port(adapter, i) { |
| err = register_netdev(adapter->port[i]); |
| if (err) |
| dev_warn(&pdev->dev, |
| "cannot register net device %s, skipping\n", |
| adapter->port[i]->name); |
| else { |
| /* |
| * Change the name we use for messages to the name of |
| * the first successfully registered interface. |
| */ |
| if (!adapter->registered_device_map) |
| adapter->name = adapter->port[i]->name; |
| |
| __set_bit(i, &adapter->registered_device_map); |
| } |
| } |
| if (!adapter->registered_device_map) { |
| dev_err(&pdev->dev, "could not register any net devices\n"); |
| goto out_free_dev; |
| } |
| |
| /* Driver's ready. Reflect it on LEDs */ |
| t3_led_ready(adapter); |
| |
| if (is_offload(adapter)) { |
| __set_bit(OFFLOAD_DEVMAP_BIT, &adapter->registered_device_map); |
| cxgb3_adapter_ofld(adapter); |
| } |
| |
| /* See what interrupts we'll be using */ |
| if (msi > 1 && cxgb_enable_msix(adapter) == 0) |
| adapter->flags |= USING_MSIX; |
| else if (msi > 0 && pci_enable_msi(pdev) == 0) |
| adapter->flags |= USING_MSI; |
| |
| err = sysfs_create_group(&adapter->port[0]->dev.kobj, |
| &cxgb3_attr_group); |
| |
| print_port_info(adapter, ai); |
| return 0; |
| |
| out_free_dev: |
| iounmap(adapter->regs); |
| for (i = ai->nports - 1; i >= 0; --i) |
| if (adapter->port[i]) |
| free_netdev(adapter->port[i]); |
| |
| out_free_adapter: |
| kfree(adapter); |
| |
| out_disable_device: |
| pci_disable_device(pdev); |
| out_release_regions: |
| pci_release_regions(pdev); |
| pci_set_drvdata(pdev, NULL); |
| return err; |
| } |
| |
| static void __devexit remove_one(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| |
| if (dev) { |
| int i; |
| struct adapter *adapter = dev->priv; |
| |
| t3_sge_stop(adapter); |
| sysfs_remove_group(&adapter->port[0]->dev.kobj, |
| &cxgb3_attr_group); |
| |
| for_each_port(adapter, i) |
| if (test_bit(i, &adapter->registered_device_map)) |
| unregister_netdev(adapter->port[i]); |
| |
| if (is_offload(adapter)) { |
| cxgb3_adapter_unofld(adapter); |
| if (test_bit(OFFLOAD_DEVMAP_BIT, |
| &adapter->open_device_map)) |
| offload_close(&adapter->tdev); |
| } |
| |
| t3_free_sge_resources(adapter); |
| cxgb_disable_msi(adapter); |
| |
| for (i = 0; i < ARRAY_SIZE(adapter->dummy_netdev); i++) |
| if (adapter->dummy_netdev[i]) { |
| free_netdev(adapter->dummy_netdev[i]); |
| adapter->dummy_netdev[i] = NULL; |
| } |
| |
| for_each_port(adapter, i) |
| if (adapter->port[i]) |
| free_netdev(adapter->port[i]); |
| |
| iounmap(adapter->regs); |
| kfree(adapter); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| } |
| } |
| |
| static struct pci_driver driver = { |
| .name = DRV_NAME, |
| .id_table = cxgb3_pci_tbl, |
| .probe = init_one, |
| .remove = __devexit_p(remove_one), |
| }; |
| |
| static int __init cxgb3_init_module(void) |
| { |
| int ret; |
| |
| cxgb3_offload_init(); |
| |
| ret = pci_register_driver(&driver); |
| return ret; |
| } |
| |
| static void __exit cxgb3_cleanup_module(void) |
| { |
| pci_unregister_driver(&driver); |
| if (cxgb3_wq) |
| destroy_workqueue(cxgb3_wq); |
| } |
| |
| module_init(cxgb3_init_module); |
| module_exit(cxgb3_cleanup_module); |