| /* |
| * wm8985.c -- WM8985 ALSA SoC Audio driver |
| * |
| * Copyright 2010 Wolfson Microelectronics plc |
| * |
| * Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * TODO: |
| * o Add OUT3/OUT4 mixer controls. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/i2c.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/spi/spi.h> |
| #include <linux/slab.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| |
| #include "wm8985.h" |
| |
| #define WM8985_NUM_SUPPLIES 4 |
| static const char *wm8985_supply_names[WM8985_NUM_SUPPLIES] = { |
| "DCVDD", |
| "DBVDD", |
| "AVDD1", |
| "AVDD2" |
| }; |
| |
| static const u16 wm8985_reg_defs[] = { |
| 0x0000, /* R0 - Software Reset */ |
| 0x0000, /* R1 - Power management 1 */ |
| 0x0000, /* R2 - Power management 2 */ |
| 0x0000, /* R3 - Power management 3 */ |
| 0x0050, /* R4 - Audio Interface */ |
| 0x0000, /* R5 - Companding control */ |
| 0x0140, /* R6 - Clock Gen control */ |
| 0x0000, /* R7 - Additional control */ |
| 0x0000, /* R8 - GPIO Control */ |
| 0x0000, /* R9 - Jack Detect Control 1 */ |
| 0x0000, /* R10 - DAC Control */ |
| 0x00FF, /* R11 - Left DAC digital Vol */ |
| 0x00FF, /* R12 - Right DAC digital vol */ |
| 0x0000, /* R13 - Jack Detect Control 2 */ |
| 0x0100, /* R14 - ADC Control */ |
| 0x00FF, /* R15 - Left ADC Digital Vol */ |
| 0x00FF, /* R16 - Right ADC Digital Vol */ |
| 0x0000, /* R17 */ |
| 0x012C, /* R18 - EQ1 - low shelf */ |
| 0x002C, /* R19 - EQ2 - peak 1 */ |
| 0x002C, /* R20 - EQ3 - peak 2 */ |
| 0x002C, /* R21 - EQ4 - peak 3 */ |
| 0x002C, /* R22 - EQ5 - high shelf */ |
| 0x0000, /* R23 */ |
| 0x0032, /* R24 - DAC Limiter 1 */ |
| 0x0000, /* R25 - DAC Limiter 2 */ |
| 0x0000, /* R26 */ |
| 0x0000, /* R27 - Notch Filter 1 */ |
| 0x0000, /* R28 - Notch Filter 2 */ |
| 0x0000, /* R29 - Notch Filter 3 */ |
| 0x0000, /* R30 - Notch Filter 4 */ |
| 0x0000, /* R31 */ |
| 0x0038, /* R32 - ALC control 1 */ |
| 0x000B, /* R33 - ALC control 2 */ |
| 0x0032, /* R34 - ALC control 3 */ |
| 0x0000, /* R35 - Noise Gate */ |
| 0x0008, /* R36 - PLL N */ |
| 0x000C, /* R37 - PLL K 1 */ |
| 0x0093, /* R38 - PLL K 2 */ |
| 0x00E9, /* R39 - PLL K 3 */ |
| 0x0000, /* R40 */ |
| 0x0000, /* R41 - 3D control */ |
| 0x0000, /* R42 - OUT4 to ADC */ |
| 0x0000, /* R43 - Beep control */ |
| 0x0033, /* R44 - Input ctrl */ |
| 0x0010, /* R45 - Left INP PGA gain ctrl */ |
| 0x0010, /* R46 - Right INP PGA gain ctrl */ |
| 0x0100, /* R47 - Left ADC BOOST ctrl */ |
| 0x0100, /* R48 - Right ADC BOOST ctrl */ |
| 0x0002, /* R49 - Output ctrl */ |
| 0x0001, /* R50 - Left mixer ctrl */ |
| 0x0001, /* R51 - Right mixer ctrl */ |
| 0x0039, /* R52 - LOUT1 (HP) volume ctrl */ |
| 0x0039, /* R53 - ROUT1 (HP) volume ctrl */ |
| 0x0039, /* R54 - LOUT2 (SPK) volume ctrl */ |
| 0x0039, /* R55 - ROUT2 (SPK) volume ctrl */ |
| 0x0001, /* R56 - OUT3 mixer ctrl */ |
| 0x0001, /* R57 - OUT4 (MONO) mix ctrl */ |
| 0x0001, /* R58 */ |
| 0x0000, /* R59 */ |
| 0x0004, /* R60 - OUTPUT ctrl */ |
| 0x0000, /* R61 - BIAS CTRL */ |
| 0x0180, /* R62 */ |
| 0x0000 /* R63 */ |
| }; |
| |
| /* |
| * latch bit 8 of these registers to ensure instant |
| * volume updates |
| */ |
| static const int volume_update_regs[] = { |
| WM8985_LEFT_DAC_DIGITAL_VOL, |
| WM8985_RIGHT_DAC_DIGITAL_VOL, |
| WM8985_LEFT_ADC_DIGITAL_VOL, |
| WM8985_RIGHT_ADC_DIGITAL_VOL, |
| WM8985_LOUT2_SPK_VOLUME_CTRL, |
| WM8985_ROUT2_SPK_VOLUME_CTRL, |
| WM8985_LOUT1_HP_VOLUME_CTRL, |
| WM8985_ROUT1_HP_VOLUME_CTRL, |
| WM8985_LEFT_INP_PGA_GAIN_CTRL, |
| WM8985_RIGHT_INP_PGA_GAIN_CTRL |
| }; |
| |
| struct wm8985_priv { |
| enum snd_soc_control_type control_type; |
| struct regulator_bulk_data supplies[WM8985_NUM_SUPPLIES]; |
| unsigned int sysclk; |
| unsigned int bclk; |
| }; |
| |
| static const struct { |
| int div; |
| int ratio; |
| } fs_ratios[] = { |
| { 10, 128 }, |
| { 15, 192 }, |
| { 20, 256 }, |
| { 30, 384 }, |
| { 40, 512 }, |
| { 60, 768 }, |
| { 80, 1024 }, |
| { 120, 1536 } |
| }; |
| |
| static const int srates[] = { 48000, 32000, 24000, 16000, 12000, 8000 }; |
| |
| static const int bclk_divs[] = { |
| 1, 2, 4, 8, 16, 32 |
| }; |
| |
| static int eqmode_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol); |
| static int eqmode_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol); |
| |
| static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1); |
| static const DECLARE_TLV_DB_SCALE(adc_tlv, -12700, 50, 1); |
| static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); |
| static const DECLARE_TLV_DB_SCALE(lim_thresh_tlv, -600, 100, 0); |
| static const DECLARE_TLV_DB_SCALE(lim_boost_tlv, 0, 100, 0); |
| static const DECLARE_TLV_DB_SCALE(alc_min_tlv, -1200, 600, 0); |
| static const DECLARE_TLV_DB_SCALE(alc_max_tlv, -675, 600, 0); |
| static const DECLARE_TLV_DB_SCALE(alc_tar_tlv, -2250, 150, 0); |
| static const DECLARE_TLV_DB_SCALE(pga_vol_tlv, -1200, 75, 0); |
| static const DECLARE_TLV_DB_SCALE(boost_tlv, -1200, 300, 1); |
| static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); |
| static const DECLARE_TLV_DB_SCALE(aux_tlv, -1500, 300, 0); |
| static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0); |
| static const DECLARE_TLV_DB_SCALE(pga_boost_tlv, 0, 2000, 0); |
| |
| static const char *alc_sel_text[] = { "Off", "Right", "Left", "Stereo" }; |
| static const SOC_ENUM_SINGLE_DECL(alc_sel, WM8985_ALC_CONTROL_1, 7, |
| alc_sel_text); |
| |
| static const char *alc_mode_text[] = { "ALC", "Limiter" }; |
| static const SOC_ENUM_SINGLE_DECL(alc_mode, WM8985_ALC_CONTROL_3, 8, |
| alc_mode_text); |
| |
| static const char *filter_mode_text[] = { "Audio", "Application" }; |
| static const SOC_ENUM_SINGLE_DECL(filter_mode, WM8985_ADC_CONTROL, 7, |
| filter_mode_text); |
| |
| static const char *eq_bw_text[] = { "Narrow", "Wide" }; |
| static const char *eqmode_text[] = { "Capture", "Playback" }; |
| static const SOC_ENUM_SINGLE_EXT_DECL(eqmode, eqmode_text); |
| |
| static const char *eq1_cutoff_text[] = { |
| "80Hz", "105Hz", "135Hz", "175Hz" |
| }; |
| static const SOC_ENUM_SINGLE_DECL(eq1_cutoff, WM8985_EQ1_LOW_SHELF, 5, |
| eq1_cutoff_text); |
| static const char *eq2_cutoff_text[] = { |
| "230Hz", "300Hz", "385Hz", "500Hz" |
| }; |
| static const SOC_ENUM_SINGLE_DECL(eq2_bw, WM8985_EQ2_PEAK_1, 8, eq_bw_text); |
| static const SOC_ENUM_SINGLE_DECL(eq2_cutoff, WM8985_EQ2_PEAK_1, 5, |
| eq2_cutoff_text); |
| static const char *eq3_cutoff_text[] = { |
| "650Hz", "850Hz", "1.1kHz", "1.4kHz" |
| }; |
| static const SOC_ENUM_SINGLE_DECL(eq3_bw, WM8985_EQ3_PEAK_2, 8, eq_bw_text); |
| static const SOC_ENUM_SINGLE_DECL(eq3_cutoff, WM8985_EQ3_PEAK_2, 5, |
| eq3_cutoff_text); |
| static const char *eq4_cutoff_text[] = { |
| "1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz" |
| }; |
| static const SOC_ENUM_SINGLE_DECL(eq4_bw, WM8985_EQ4_PEAK_3, 8, eq_bw_text); |
| static const SOC_ENUM_SINGLE_DECL(eq4_cutoff, WM8985_EQ4_PEAK_3, 5, |
| eq4_cutoff_text); |
| static const char *eq5_cutoff_text[] = { |
| "5.3kHz", "6.9kHz", "9kHz", "11.7kHz" |
| }; |
| static const SOC_ENUM_SINGLE_DECL(eq5_cutoff, WM8985_EQ5_HIGH_SHELF, 5, |
| eq5_cutoff_text); |
| |
| static const char *speaker_mode_text[] = { "Class A/B", "Class D" }; |
| static const SOC_ENUM_SINGLE_DECL(speaker_mode, 0x17, 8, speaker_mode_text); |
| |
| static const char *depth_3d_text[] = { |
| "Off", |
| "6.67%", |
| "13.3%", |
| "20%", |
| "26.7%", |
| "33.3%", |
| "40%", |
| "46.6%", |
| "53.3%", |
| "60%", |
| "66.7%", |
| "73.3%", |
| "80%", |
| "86.7%", |
| "93.3%", |
| "100%" |
| }; |
| static const SOC_ENUM_SINGLE_DECL(depth_3d, WM8985_3D_CONTROL, 0, |
| depth_3d_text); |
| |
| static const struct snd_kcontrol_new wm8985_snd_controls[] = { |
| SOC_SINGLE("Digital Loopback Switch", WM8985_COMPANDING_CONTROL, |
| 0, 1, 0), |
| |
| SOC_ENUM("ALC Capture Function", alc_sel), |
| SOC_SINGLE_TLV("ALC Capture Max Volume", WM8985_ALC_CONTROL_1, |
| 3, 7, 0, alc_max_tlv), |
| SOC_SINGLE_TLV("ALC Capture Min Volume", WM8985_ALC_CONTROL_1, |
| 0, 7, 0, alc_min_tlv), |
| SOC_SINGLE_TLV("ALC Capture Target Volume", WM8985_ALC_CONTROL_2, |
| 0, 15, 0, alc_tar_tlv), |
| SOC_SINGLE("ALC Capture Attack", WM8985_ALC_CONTROL_3, 0, 10, 0), |
| SOC_SINGLE("ALC Capture Hold", WM8985_ALC_CONTROL_2, 4, 10, 0), |
| SOC_SINGLE("ALC Capture Decay", WM8985_ALC_CONTROL_3, 4, 10, 0), |
| SOC_ENUM("ALC Mode", alc_mode), |
| SOC_SINGLE("ALC Capture NG Switch", WM8985_NOISE_GATE, |
| 3, 1, 0), |
| SOC_SINGLE("ALC Capture NG Threshold", WM8985_NOISE_GATE, |
| 0, 7, 1), |
| |
| SOC_DOUBLE_R_TLV("Capture Volume", WM8985_LEFT_ADC_DIGITAL_VOL, |
| WM8985_RIGHT_ADC_DIGITAL_VOL, 0, 255, 0, adc_tlv), |
| SOC_DOUBLE_R("Capture PGA ZC Switch", WM8985_LEFT_INP_PGA_GAIN_CTRL, |
| WM8985_RIGHT_INP_PGA_GAIN_CTRL, 7, 1, 0), |
| SOC_DOUBLE_R_TLV("Capture PGA Volume", WM8985_LEFT_INP_PGA_GAIN_CTRL, |
| WM8985_RIGHT_INP_PGA_GAIN_CTRL, 0, 63, 0, pga_vol_tlv), |
| |
| SOC_DOUBLE_R_TLV("Capture PGA Boost Volume", |
| WM8985_LEFT_ADC_BOOST_CTRL, WM8985_RIGHT_ADC_BOOST_CTRL, |
| 8, 1, 0, pga_boost_tlv), |
| |
| SOC_DOUBLE("ADC Inversion Switch", WM8985_ADC_CONTROL, 0, 1, 1, 0), |
| SOC_SINGLE("ADC 128x Oversampling Switch", WM8985_ADC_CONTROL, 8, 1, 0), |
| |
| SOC_DOUBLE_R_TLV("Playback Volume", WM8985_LEFT_DAC_DIGITAL_VOL, |
| WM8985_RIGHT_DAC_DIGITAL_VOL, 0, 255, 0, dac_tlv), |
| |
| SOC_SINGLE("DAC Playback Limiter Switch", WM8985_DAC_LIMITER_1, 8, 1, 0), |
| SOC_SINGLE("DAC Playback Limiter Decay", WM8985_DAC_LIMITER_1, 4, 10, 0), |
| SOC_SINGLE("DAC Playback Limiter Attack", WM8985_DAC_LIMITER_1, 0, 11, 0), |
| SOC_SINGLE_TLV("DAC Playback Limiter Threshold", WM8985_DAC_LIMITER_2, |
| 4, 7, 1, lim_thresh_tlv), |
| SOC_SINGLE_TLV("DAC Playback Limiter Boost Volume", WM8985_DAC_LIMITER_2, |
| 0, 12, 0, lim_boost_tlv), |
| SOC_DOUBLE("DAC Inversion Switch", WM8985_DAC_CONTROL, 0, 1, 1, 0), |
| SOC_SINGLE("DAC Auto Mute Switch", WM8985_DAC_CONTROL, 2, 1, 0), |
| SOC_SINGLE("DAC 128x Oversampling Switch", WM8985_DAC_CONTROL, 3, 1, 0), |
| |
| SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8985_LOUT1_HP_VOLUME_CTRL, |
| WM8985_ROUT1_HP_VOLUME_CTRL, 0, 63, 0, out_tlv), |
| SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8985_LOUT1_HP_VOLUME_CTRL, |
| WM8985_ROUT1_HP_VOLUME_CTRL, 7, 1, 0), |
| SOC_DOUBLE_R("Headphone Switch", WM8985_LOUT1_HP_VOLUME_CTRL, |
| WM8985_ROUT1_HP_VOLUME_CTRL, 6, 1, 1), |
| |
| SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8985_LOUT2_SPK_VOLUME_CTRL, |
| WM8985_ROUT2_SPK_VOLUME_CTRL, 0, 63, 0, out_tlv), |
| SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8985_LOUT2_SPK_VOLUME_CTRL, |
| WM8985_ROUT2_SPK_VOLUME_CTRL, 7, 1, 0), |
| SOC_DOUBLE_R("Speaker Switch", WM8985_LOUT2_SPK_VOLUME_CTRL, |
| WM8985_ROUT2_SPK_VOLUME_CTRL, 6, 1, 1), |
| |
| SOC_SINGLE("High Pass Filter Switch", WM8985_ADC_CONTROL, 8, 1, 0), |
| SOC_ENUM("High Pass Filter Mode", filter_mode), |
| SOC_SINGLE("High Pass Filter Cutoff", WM8985_ADC_CONTROL, 4, 7, 0), |
| |
| SOC_DOUBLE_R_TLV("Aux Bypass Volume", |
| WM8985_LEFT_MIXER_CTRL, WM8985_RIGHT_MIXER_CTRL, 6, 7, 0, |
| aux_tlv), |
| |
| SOC_DOUBLE_R_TLV("Input PGA Bypass Volume", |
| WM8985_LEFT_MIXER_CTRL, WM8985_RIGHT_MIXER_CTRL, 2, 7, 0, |
| bypass_tlv), |
| |
| SOC_ENUM_EXT("Equalizer Function", eqmode, eqmode_get, eqmode_put), |
| SOC_ENUM("EQ1 Cutoff", eq1_cutoff), |
| SOC_SINGLE_TLV("EQ1 Volume", WM8985_EQ1_LOW_SHELF, 0, 24, 1, eq_tlv), |
| SOC_ENUM("EQ2 Bandwith", eq2_bw), |
| SOC_ENUM("EQ2 Cutoff", eq2_cutoff), |
| SOC_SINGLE_TLV("EQ2 Volume", WM8985_EQ2_PEAK_1, 0, 24, 1, eq_tlv), |
| SOC_ENUM("EQ3 Bandwith", eq3_bw), |
| SOC_ENUM("EQ3 Cutoff", eq3_cutoff), |
| SOC_SINGLE_TLV("EQ3 Volume", WM8985_EQ3_PEAK_2, 0, 24, 1, eq_tlv), |
| SOC_ENUM("EQ4 Bandwith", eq4_bw), |
| SOC_ENUM("EQ4 Cutoff", eq4_cutoff), |
| SOC_SINGLE_TLV("EQ4 Volume", WM8985_EQ4_PEAK_3, 0, 24, 1, eq_tlv), |
| SOC_ENUM("EQ5 Cutoff", eq5_cutoff), |
| SOC_SINGLE_TLV("EQ5 Volume", WM8985_EQ5_HIGH_SHELF, 0, 24, 1, eq_tlv), |
| |
| SOC_ENUM("3D Depth", depth_3d), |
| |
| SOC_ENUM("Speaker Mode", speaker_mode) |
| }; |
| |
| static const struct snd_kcontrol_new left_out_mixer[] = { |
| SOC_DAPM_SINGLE("Line Switch", WM8985_LEFT_MIXER_CTRL, 1, 1, 0), |
| SOC_DAPM_SINGLE("Aux Switch", WM8985_LEFT_MIXER_CTRL, 5, 1, 0), |
| SOC_DAPM_SINGLE("PCM Switch", WM8985_LEFT_MIXER_CTRL, 0, 1, 0), |
| }; |
| |
| static const struct snd_kcontrol_new right_out_mixer[] = { |
| SOC_DAPM_SINGLE("Line Switch", WM8985_RIGHT_MIXER_CTRL, 1, 1, 0), |
| SOC_DAPM_SINGLE("Aux Switch", WM8985_RIGHT_MIXER_CTRL, 5, 1, 0), |
| SOC_DAPM_SINGLE("PCM Switch", WM8985_RIGHT_MIXER_CTRL, 0, 1, 0), |
| }; |
| |
| static const struct snd_kcontrol_new left_input_mixer[] = { |
| SOC_DAPM_SINGLE("L2 Switch", WM8985_INPUT_CTRL, 2, 1, 0), |
| SOC_DAPM_SINGLE("MicN Switch", WM8985_INPUT_CTRL, 1, 1, 0), |
| SOC_DAPM_SINGLE("MicP Switch", WM8985_INPUT_CTRL, 0, 1, 0), |
| }; |
| |
| static const struct snd_kcontrol_new right_input_mixer[] = { |
| SOC_DAPM_SINGLE("R2 Switch", WM8985_INPUT_CTRL, 6, 1, 0), |
| SOC_DAPM_SINGLE("MicN Switch", WM8985_INPUT_CTRL, 5, 1, 0), |
| SOC_DAPM_SINGLE("MicP Switch", WM8985_INPUT_CTRL, 4, 1, 0), |
| }; |
| |
| static const struct snd_kcontrol_new left_boost_mixer[] = { |
| SOC_DAPM_SINGLE_TLV("L2 Volume", WM8985_LEFT_ADC_BOOST_CTRL, |
| 4, 7, 0, boost_tlv), |
| SOC_DAPM_SINGLE_TLV("AUXL Volume", WM8985_LEFT_ADC_BOOST_CTRL, |
| 0, 7, 0, boost_tlv) |
| }; |
| |
| static const struct snd_kcontrol_new right_boost_mixer[] = { |
| SOC_DAPM_SINGLE_TLV("R2 Volume", WM8985_RIGHT_ADC_BOOST_CTRL, |
| 4, 7, 0, boost_tlv), |
| SOC_DAPM_SINGLE_TLV("AUXR Volume", WM8985_RIGHT_ADC_BOOST_CTRL, |
| 0, 7, 0, boost_tlv) |
| }; |
| |
| static const struct snd_soc_dapm_widget wm8985_dapm_widgets[] = { |
| SND_SOC_DAPM_DAC("Left DAC", "Left Playback", WM8985_POWER_MANAGEMENT_3, |
| 0, 0), |
| SND_SOC_DAPM_DAC("Right DAC", "Right Playback", WM8985_POWER_MANAGEMENT_3, |
| 1, 0), |
| SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8985_POWER_MANAGEMENT_2, |
| 0, 0), |
| SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8985_POWER_MANAGEMENT_2, |
| 1, 0), |
| |
| SND_SOC_DAPM_MIXER("Left Output Mixer", WM8985_POWER_MANAGEMENT_3, |
| 2, 0, left_out_mixer, ARRAY_SIZE(left_out_mixer)), |
| SND_SOC_DAPM_MIXER("Right Output Mixer", WM8985_POWER_MANAGEMENT_3, |
| 3, 0, right_out_mixer, ARRAY_SIZE(right_out_mixer)), |
| |
| SND_SOC_DAPM_MIXER("Left Input Mixer", WM8985_POWER_MANAGEMENT_2, |
| 2, 0, left_input_mixer, ARRAY_SIZE(left_input_mixer)), |
| SND_SOC_DAPM_MIXER("Right Input Mixer", WM8985_POWER_MANAGEMENT_2, |
| 3, 0, right_input_mixer, ARRAY_SIZE(right_input_mixer)), |
| |
| SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8985_POWER_MANAGEMENT_2, |
| 4, 0, left_boost_mixer, ARRAY_SIZE(left_boost_mixer)), |
| SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8985_POWER_MANAGEMENT_2, |
| 5, 0, right_boost_mixer, ARRAY_SIZE(right_boost_mixer)), |
| |
| SND_SOC_DAPM_PGA("Left Capture PGA", WM8985_LEFT_INP_PGA_GAIN_CTRL, |
| 6, 1, NULL, 0), |
| SND_SOC_DAPM_PGA("Right Capture PGA", WM8985_RIGHT_INP_PGA_GAIN_CTRL, |
| 6, 1, NULL, 0), |
| |
| SND_SOC_DAPM_PGA("Left Headphone Out", WM8985_POWER_MANAGEMENT_2, |
| 7, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("Right Headphone Out", WM8985_POWER_MANAGEMENT_2, |
| 8, 0, NULL, 0), |
| |
| SND_SOC_DAPM_PGA("Left Speaker Out", WM8985_POWER_MANAGEMENT_3, |
| 5, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("Right Speaker Out", WM8985_POWER_MANAGEMENT_3, |
| 6, 0, NULL, 0), |
| |
| SND_SOC_DAPM_SUPPLY("Mic Bias", WM8985_POWER_MANAGEMENT_1, 4, 0, |
| NULL, 0), |
| |
| SND_SOC_DAPM_INPUT("LIN"), |
| SND_SOC_DAPM_INPUT("LIP"), |
| SND_SOC_DAPM_INPUT("RIN"), |
| SND_SOC_DAPM_INPUT("RIP"), |
| SND_SOC_DAPM_INPUT("AUXL"), |
| SND_SOC_DAPM_INPUT("AUXR"), |
| SND_SOC_DAPM_INPUT("L2"), |
| SND_SOC_DAPM_INPUT("R2"), |
| SND_SOC_DAPM_OUTPUT("HPL"), |
| SND_SOC_DAPM_OUTPUT("HPR"), |
| SND_SOC_DAPM_OUTPUT("SPKL"), |
| SND_SOC_DAPM_OUTPUT("SPKR") |
| }; |
| |
| static const struct snd_soc_dapm_route audio_map[] = { |
| { "Right Output Mixer", "PCM Switch", "Right DAC" }, |
| { "Right Output Mixer", "Aux Switch", "AUXR" }, |
| { "Right Output Mixer", "Line Switch", "Right Boost Mixer" }, |
| |
| { "Left Output Mixer", "PCM Switch", "Left DAC" }, |
| { "Left Output Mixer", "Aux Switch", "AUXL" }, |
| { "Left Output Mixer", "Line Switch", "Left Boost Mixer" }, |
| |
| { "Right Headphone Out", NULL, "Right Output Mixer" }, |
| { "HPR", NULL, "Right Headphone Out" }, |
| |
| { "Left Headphone Out", NULL, "Left Output Mixer" }, |
| { "HPL", NULL, "Left Headphone Out" }, |
| |
| { "Right Speaker Out", NULL, "Right Output Mixer" }, |
| { "SPKR", NULL, "Right Speaker Out" }, |
| |
| { "Left Speaker Out", NULL, "Left Output Mixer" }, |
| { "SPKL", NULL, "Left Speaker Out" }, |
| |
| { "Right ADC", NULL, "Right Boost Mixer" }, |
| |
| { "Right Boost Mixer", "AUXR Volume", "AUXR" }, |
| { "Right Boost Mixer", NULL, "Right Capture PGA" }, |
| { "Right Boost Mixer", "R2 Volume", "R2" }, |
| |
| { "Left ADC", NULL, "Left Boost Mixer" }, |
| |
| { "Left Boost Mixer", "AUXL Volume", "AUXL" }, |
| { "Left Boost Mixer", NULL, "Left Capture PGA" }, |
| { "Left Boost Mixer", "L2 Volume", "L2" }, |
| |
| { "Right Capture PGA", NULL, "Right Input Mixer" }, |
| { "Left Capture PGA", NULL, "Left Input Mixer" }, |
| |
| { "Right Input Mixer", "R2 Switch", "R2" }, |
| { "Right Input Mixer", "MicN Switch", "RIN" }, |
| { "Right Input Mixer", "MicP Switch", "RIP" }, |
| |
| { "Left Input Mixer", "L2 Switch", "L2" }, |
| { "Left Input Mixer", "MicN Switch", "LIN" }, |
| { "Left Input Mixer", "MicP Switch", "LIP" }, |
| }; |
| |
| static int eqmode_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| unsigned int reg; |
| |
| reg = snd_soc_read(codec, WM8985_EQ1_LOW_SHELF); |
| if (reg & WM8985_EQ3DMODE) |
| ucontrol->value.integer.value[0] = 1; |
| else |
| ucontrol->value.integer.value[0] = 0; |
| |
| return 0; |
| } |
| |
| static int eqmode_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| unsigned int regpwr2, regpwr3; |
| unsigned int reg_eq; |
| |
| if (ucontrol->value.integer.value[0] != 0 |
| && ucontrol->value.integer.value[0] != 1) |
| return -EINVAL; |
| |
| reg_eq = snd_soc_read(codec, WM8985_EQ1_LOW_SHELF); |
| switch ((reg_eq & WM8985_EQ3DMODE) >> WM8985_EQ3DMODE_SHIFT) { |
| case 0: |
| if (!ucontrol->value.integer.value[0]) |
| return 0; |
| break; |
| case 1: |
| if (ucontrol->value.integer.value[0]) |
| return 0; |
| break; |
| } |
| |
| regpwr2 = snd_soc_read(codec, WM8985_POWER_MANAGEMENT_2); |
| regpwr3 = snd_soc_read(codec, WM8985_POWER_MANAGEMENT_3); |
| /* disable the DACs and ADCs */ |
| snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_2, |
| WM8985_ADCENR_MASK | WM8985_ADCENL_MASK, 0); |
| snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_3, |
| WM8985_DACENR_MASK | WM8985_DACENL_MASK, 0); |
| snd_soc_update_bits(codec, WM8985_ADDITIONAL_CONTROL, |
| WM8985_M128ENB_MASK, WM8985_M128ENB); |
| /* set the desired eqmode */ |
| snd_soc_update_bits(codec, WM8985_EQ1_LOW_SHELF, |
| WM8985_EQ3DMODE_MASK, |
| ucontrol->value.integer.value[0] |
| << WM8985_EQ3DMODE_SHIFT); |
| /* restore DAC/ADC configuration */ |
| snd_soc_write(codec, WM8985_POWER_MANAGEMENT_2, regpwr2); |
| snd_soc_write(codec, WM8985_POWER_MANAGEMENT_3, regpwr3); |
| return 0; |
| } |
| |
| static int wm8985_add_widgets(struct snd_soc_codec *codec) |
| { |
| struct snd_soc_dapm_context *dapm = &codec->dapm; |
| |
| snd_soc_dapm_new_controls(dapm, wm8985_dapm_widgets, |
| ARRAY_SIZE(wm8985_dapm_widgets)); |
| snd_soc_dapm_add_routes(dapm, audio_map, |
| ARRAY_SIZE(audio_map)); |
| return 0; |
| } |
| |
| static int wm8985_reset(struct snd_soc_codec *codec) |
| { |
| return snd_soc_write(codec, WM8985_SOFTWARE_RESET, 0x0); |
| } |
| |
| static int wm8985_dac_mute(struct snd_soc_dai *dai, int mute) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| |
| return snd_soc_update_bits(codec, WM8985_DAC_CONTROL, |
| WM8985_SOFTMUTE_MASK, |
| !!mute << WM8985_SOFTMUTE_SHIFT); |
| } |
| |
| static int wm8985_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| struct snd_soc_codec *codec; |
| u16 format, master, bcp, lrp; |
| |
| codec = dai->codec; |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| format = 0x2; |
| break; |
| case SND_SOC_DAIFMT_RIGHT_J: |
| format = 0x0; |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| format = 0x1; |
| break; |
| case SND_SOC_DAIFMT_DSP_A: |
| case SND_SOC_DAIFMT_DSP_B: |
| format = 0x3; |
| break; |
| default: |
| dev_err(dai->dev, "Unknown dai format\n"); |
| return -EINVAL; |
| } |
| |
| snd_soc_update_bits(codec, WM8985_AUDIO_INTERFACE, |
| WM8985_FMT_MASK, format << WM8985_FMT_SHIFT); |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| master = 1; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFS: |
| master = 0; |
| break; |
| default: |
| dev_err(dai->dev, "Unknown master/slave configuration\n"); |
| return -EINVAL; |
| } |
| |
| snd_soc_update_bits(codec, WM8985_CLOCK_GEN_CONTROL, |
| WM8985_MS_MASK, master << WM8985_MS_SHIFT); |
| |
| /* frame inversion is not valid for dsp modes */ |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_DSP_A: |
| case SND_SOC_DAIFMT_DSP_B: |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_IB_IF: |
| case SND_SOC_DAIFMT_NB_IF: |
| return -EINVAL; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| bcp = lrp = 0; |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_IB_IF: |
| bcp = lrp = 1; |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| bcp = 1; |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| lrp = 1; |
| break; |
| default: |
| dev_err(dai->dev, "Unknown polarity configuration\n"); |
| return -EINVAL; |
| } |
| |
| snd_soc_update_bits(codec, WM8985_AUDIO_INTERFACE, |
| WM8985_LRP_MASK, lrp << WM8985_LRP_SHIFT); |
| snd_soc_update_bits(codec, WM8985_AUDIO_INTERFACE, |
| WM8985_BCP_MASK, bcp << WM8985_BCP_SHIFT); |
| return 0; |
| } |
| |
| static int wm8985_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| int i; |
| struct snd_soc_codec *codec; |
| struct wm8985_priv *wm8985; |
| u16 blen, srate_idx; |
| unsigned int tmp; |
| int srate_best; |
| |
| codec = dai->codec; |
| wm8985 = snd_soc_codec_get_drvdata(codec); |
| |
| wm8985->bclk = snd_soc_params_to_bclk(params); |
| if ((int)wm8985->bclk < 0) |
| return wm8985->bclk; |
| |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S16_LE: |
| blen = 0x0; |
| break; |
| case SNDRV_PCM_FORMAT_S20_3LE: |
| blen = 0x1; |
| break; |
| case SNDRV_PCM_FORMAT_S24_LE: |
| blen = 0x2; |
| break; |
| case SNDRV_PCM_FORMAT_S32_LE: |
| blen = 0x3; |
| break; |
| default: |
| dev_err(dai->dev, "Unsupported word length %u\n", |
| params_format(params)); |
| return -EINVAL; |
| } |
| |
| snd_soc_update_bits(codec, WM8985_AUDIO_INTERFACE, |
| WM8985_WL_MASK, blen << WM8985_WL_SHIFT); |
| |
| /* |
| * match to the nearest possible sample rate and rely |
| * on the array index to configure the SR register |
| */ |
| srate_idx = 0; |
| srate_best = abs(srates[0] - params_rate(params)); |
| for (i = 1; i < ARRAY_SIZE(srates); ++i) { |
| if (abs(srates[i] - params_rate(params)) >= srate_best) |
| continue; |
| srate_idx = i; |
| srate_best = abs(srates[i] - params_rate(params)); |
| } |
| |
| dev_dbg(dai->dev, "Selected SRATE = %d\n", srates[srate_idx]); |
| snd_soc_update_bits(codec, WM8985_ADDITIONAL_CONTROL, |
| WM8985_SR_MASK, srate_idx << WM8985_SR_SHIFT); |
| |
| dev_dbg(dai->dev, "Target BCLK = %uHz\n", wm8985->bclk); |
| dev_dbg(dai->dev, "SYSCLK = %uHz\n", wm8985->sysclk); |
| |
| for (i = 0; i < ARRAY_SIZE(fs_ratios); ++i) { |
| if (wm8985->sysclk / params_rate(params) |
| == fs_ratios[i].ratio) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(fs_ratios)) { |
| dev_err(dai->dev, "Unable to configure MCLK ratio %u/%u\n", |
| wm8985->sysclk, params_rate(params)); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dai->dev, "MCLK ratio = %dfs\n", fs_ratios[i].ratio); |
| snd_soc_update_bits(codec, WM8985_CLOCK_GEN_CONTROL, |
| WM8985_MCLKDIV_MASK, i << WM8985_MCLKDIV_SHIFT); |
| |
| /* select the appropriate bclk divider */ |
| tmp = (wm8985->sysclk / fs_ratios[i].div) * 10; |
| for (i = 0; i < ARRAY_SIZE(bclk_divs); ++i) { |
| if (wm8985->bclk == tmp / bclk_divs[i]) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(bclk_divs)) { |
| dev_err(dai->dev, "No matching BCLK divider found\n"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dai->dev, "BCLK div = %d\n", i); |
| snd_soc_update_bits(codec, WM8985_CLOCK_GEN_CONTROL, |
| WM8985_BCLKDIV_MASK, i << WM8985_BCLKDIV_SHIFT); |
| return 0; |
| } |
| |
| struct pll_div { |
| u32 div2:1; |
| u32 n:4; |
| u32 k:24; |
| }; |
| |
| #define FIXED_PLL_SIZE ((1ULL << 24) * 10) |
| static int pll_factors(struct pll_div *pll_div, unsigned int target, |
| unsigned int source) |
| { |
| u64 Kpart; |
| unsigned long int K, Ndiv, Nmod; |
| |
| pll_div->div2 = 0; |
| Ndiv = target / source; |
| if (Ndiv < 6) { |
| source >>= 1; |
| pll_div->div2 = 1; |
| Ndiv = target / source; |
| } |
| |
| if (Ndiv < 6 || Ndiv > 12) { |
| printk(KERN_ERR "%s: WM8985 N value is not within" |
| " the recommended range: %lu\n", __func__, Ndiv); |
| return -EINVAL; |
| } |
| pll_div->n = Ndiv; |
| |
| Nmod = target % source; |
| Kpart = FIXED_PLL_SIZE * (u64)Nmod; |
| |
| do_div(Kpart, source); |
| |
| K = Kpart & 0xffffffff; |
| if ((K % 10) >= 5) |
| K += 5; |
| K /= 10; |
| pll_div->k = K; |
| |
| return 0; |
| } |
| |
| static int wm8985_set_pll(struct snd_soc_dai *dai, int pll_id, |
| int source, unsigned int freq_in, |
| unsigned int freq_out) |
| { |
| int ret; |
| struct snd_soc_codec *codec; |
| struct pll_div pll_div; |
| |
| codec = dai->codec; |
| if (freq_in && freq_out) { |
| ret = pll_factors(&pll_div, freq_out * 4 * 2, freq_in); |
| if (ret) |
| return ret; |
| } |
| |
| /* disable the PLL before reprogramming it */ |
| snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_1, |
| WM8985_PLLEN_MASK, 0); |
| |
| if (!freq_in || !freq_out) |
| return 0; |
| |
| /* set PLLN and PRESCALE */ |
| snd_soc_write(codec, WM8985_PLL_N, |
| (pll_div.div2 << WM8985_PLL_PRESCALE_SHIFT) |
| | pll_div.n); |
| /* set PLLK */ |
| snd_soc_write(codec, WM8985_PLL_K_3, pll_div.k & 0x1ff); |
| snd_soc_write(codec, WM8985_PLL_K_2, (pll_div.k >> 9) & 0x1ff); |
| snd_soc_write(codec, WM8985_PLL_K_1, (pll_div.k >> 18)); |
| /* set the source of the clock to be the PLL */ |
| snd_soc_update_bits(codec, WM8985_CLOCK_GEN_CONTROL, |
| WM8985_CLKSEL_MASK, WM8985_CLKSEL); |
| /* enable the PLL */ |
| snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_1, |
| WM8985_PLLEN_MASK, WM8985_PLLEN); |
| return 0; |
| } |
| |
| static int wm8985_set_sysclk(struct snd_soc_dai *dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct snd_soc_codec *codec; |
| struct wm8985_priv *wm8985; |
| |
| codec = dai->codec; |
| wm8985 = snd_soc_codec_get_drvdata(codec); |
| |
| switch (clk_id) { |
| case WM8985_CLKSRC_MCLK: |
| snd_soc_update_bits(codec, WM8985_CLOCK_GEN_CONTROL, |
| WM8985_CLKSEL_MASK, 0); |
| snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_1, |
| WM8985_PLLEN_MASK, 0); |
| break; |
| case WM8985_CLKSRC_PLL: |
| snd_soc_update_bits(codec, WM8985_CLOCK_GEN_CONTROL, |
| WM8985_CLKSEL_MASK, WM8985_CLKSEL); |
| break; |
| default: |
| dev_err(dai->dev, "Unknown clock source %d\n", clk_id); |
| return -EINVAL; |
| } |
| |
| wm8985->sysclk = freq; |
| return 0; |
| } |
| |
| static void wm8985_sync_cache(struct snd_soc_codec *codec) |
| { |
| short i; |
| u16 *cache; |
| |
| if (!codec->cache_sync) |
| return; |
| codec->cache_only = 0; |
| /* restore cache */ |
| cache = codec->reg_cache; |
| for (i = 0; i < codec->driver->reg_cache_size; i++) { |
| if (i == WM8985_SOFTWARE_RESET |
| || cache[i] == wm8985_reg_defs[i]) |
| continue; |
| snd_soc_write(codec, i, cache[i]); |
| } |
| codec->cache_sync = 0; |
| } |
| |
| static int wm8985_set_bias_level(struct snd_soc_codec *codec, |
| enum snd_soc_bias_level level) |
| { |
| int ret; |
| struct wm8985_priv *wm8985; |
| |
| wm8985 = snd_soc_codec_get_drvdata(codec); |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| case SND_SOC_BIAS_PREPARE: |
| /* VMID at 75k */ |
| snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_1, |
| WM8985_VMIDSEL_MASK, |
| 1 << WM8985_VMIDSEL_SHIFT); |
| break; |
| case SND_SOC_BIAS_STANDBY: |
| if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { |
| ret = regulator_bulk_enable(ARRAY_SIZE(wm8985->supplies), |
| wm8985->supplies); |
| if (ret) { |
| dev_err(codec->dev, |
| "Failed to enable supplies: %d\n", |
| ret); |
| return ret; |
| } |
| |
| wm8985_sync_cache(codec); |
| |
| /* enable anti-pop features */ |
| snd_soc_update_bits(codec, WM8985_OUT4_TO_ADC, |
| WM8985_POBCTRL_MASK, |
| WM8985_POBCTRL); |
| /* enable thermal shutdown */ |
| snd_soc_update_bits(codec, WM8985_OUTPUT_CTRL0, |
| WM8985_TSDEN_MASK, WM8985_TSDEN); |
| snd_soc_update_bits(codec, WM8985_OUTPUT_CTRL0, |
| WM8985_TSOPCTRL_MASK, |
| WM8985_TSOPCTRL); |
| /* enable BIASEN */ |
| snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_1, |
| WM8985_BIASEN_MASK, WM8985_BIASEN); |
| /* VMID at 75k */ |
| snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_1, |
| WM8985_VMIDSEL_MASK, |
| 1 << WM8985_VMIDSEL_SHIFT); |
| msleep(500); |
| /* disable anti-pop features */ |
| snd_soc_update_bits(codec, WM8985_OUT4_TO_ADC, |
| WM8985_POBCTRL_MASK, 0); |
| } |
| /* VMID at 300k */ |
| snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_1, |
| WM8985_VMIDSEL_MASK, |
| 2 << WM8985_VMIDSEL_SHIFT); |
| break; |
| case SND_SOC_BIAS_OFF: |
| /* disable thermal shutdown */ |
| snd_soc_update_bits(codec, WM8985_OUTPUT_CTRL0, |
| WM8985_TSOPCTRL_MASK, 0); |
| snd_soc_update_bits(codec, WM8985_OUTPUT_CTRL0, |
| WM8985_TSDEN_MASK, 0); |
| /* disable VMIDSEL and BIASEN */ |
| snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_1, |
| WM8985_VMIDSEL_MASK | WM8985_BIASEN_MASK, |
| 0); |
| snd_soc_write(codec, WM8985_POWER_MANAGEMENT_1, 0); |
| snd_soc_write(codec, WM8985_POWER_MANAGEMENT_2, 0); |
| snd_soc_write(codec, WM8985_POWER_MANAGEMENT_3, 0); |
| |
| codec->cache_sync = 1; |
| |
| regulator_bulk_disable(ARRAY_SIZE(wm8985->supplies), |
| wm8985->supplies); |
| break; |
| } |
| |
| codec->dapm.bias_level = level; |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int wm8985_suspend(struct snd_soc_codec *codec, pm_message_t state) |
| { |
| wm8985_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| return 0; |
| } |
| |
| static int wm8985_resume(struct snd_soc_codec *codec) |
| { |
| wm8985_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| return 0; |
| } |
| #else |
| #define wm8985_suspend NULL |
| #define wm8985_resume NULL |
| #endif |
| |
| static int wm8985_remove(struct snd_soc_codec *codec) |
| { |
| struct wm8985_priv *wm8985; |
| |
| wm8985 = snd_soc_codec_get_drvdata(codec); |
| wm8985_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| regulator_bulk_free(ARRAY_SIZE(wm8985->supplies), wm8985->supplies); |
| return 0; |
| } |
| |
| static int wm8985_probe(struct snd_soc_codec *codec) |
| { |
| size_t i; |
| struct wm8985_priv *wm8985; |
| int ret; |
| u16 *cache; |
| |
| wm8985 = snd_soc_codec_get_drvdata(codec); |
| |
| ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8985->control_type); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to set cache i/o: %d\n", ret); |
| return ret; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(wm8985->supplies); i++) |
| wm8985->supplies[i].supply = wm8985_supply_names[i]; |
| |
| ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8985->supplies), |
| wm8985->supplies); |
| if (ret) { |
| dev_err(codec->dev, "Failed to request supplies: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(wm8985->supplies), |
| wm8985->supplies); |
| if (ret) { |
| dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); |
| goto err_reg_get; |
| } |
| |
| ret = wm8985_reset(codec); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to issue reset: %d\n", ret); |
| goto err_reg_enable; |
| } |
| |
| cache = codec->reg_cache; |
| /* latch volume update bits */ |
| for (i = 0; i < ARRAY_SIZE(volume_update_regs); ++i) |
| cache[volume_update_regs[i]] |= 0x100; |
| /* enable BIASCUT */ |
| cache[WM8985_BIAS_CTRL] |= WM8985_BIASCUT; |
| codec->cache_sync = 1; |
| |
| snd_soc_add_controls(codec, wm8985_snd_controls, |
| ARRAY_SIZE(wm8985_snd_controls)); |
| wm8985_add_widgets(codec); |
| |
| wm8985_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| return 0; |
| |
| err_reg_enable: |
| regulator_bulk_disable(ARRAY_SIZE(wm8985->supplies), wm8985->supplies); |
| err_reg_get: |
| regulator_bulk_free(ARRAY_SIZE(wm8985->supplies), wm8985->supplies); |
| return ret; |
| } |
| |
| static const struct snd_soc_dai_ops wm8985_dai_ops = { |
| .digital_mute = wm8985_dac_mute, |
| .hw_params = wm8985_hw_params, |
| .set_fmt = wm8985_set_fmt, |
| .set_sysclk = wm8985_set_sysclk, |
| .set_pll = wm8985_set_pll |
| }; |
| |
| #define WM8985_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static struct snd_soc_dai_driver wm8985_dai = { |
| .name = "wm8985-hifi", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = SNDRV_PCM_RATE_8000_48000, |
| .formats = WM8985_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "Capture", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = SNDRV_PCM_RATE_8000_48000, |
| .formats = WM8985_FORMATS, |
| }, |
| .ops = &wm8985_dai_ops, |
| .symmetric_rates = 1 |
| }; |
| |
| static struct snd_soc_codec_driver soc_codec_dev_wm8985 = { |
| .probe = wm8985_probe, |
| .remove = wm8985_remove, |
| .suspend = wm8985_suspend, |
| .resume = wm8985_resume, |
| .set_bias_level = wm8985_set_bias_level, |
| .reg_cache_size = ARRAY_SIZE(wm8985_reg_defs), |
| .reg_word_size = sizeof(u16), |
| .reg_cache_default = wm8985_reg_defs |
| }; |
| |
| #if defined(CONFIG_SPI_MASTER) |
| static int __devinit wm8985_spi_probe(struct spi_device *spi) |
| { |
| struct wm8985_priv *wm8985; |
| int ret; |
| |
| wm8985 = kzalloc(sizeof *wm8985, GFP_KERNEL); |
| if (!wm8985) |
| return -ENOMEM; |
| |
| wm8985->control_type = SND_SOC_SPI; |
| spi_set_drvdata(spi, wm8985); |
| |
| ret = snd_soc_register_codec(&spi->dev, |
| &soc_codec_dev_wm8985, &wm8985_dai, 1); |
| if (ret < 0) |
| kfree(wm8985); |
| return ret; |
| } |
| |
| static int __devexit wm8985_spi_remove(struct spi_device *spi) |
| { |
| snd_soc_unregister_codec(&spi->dev); |
| kfree(spi_get_drvdata(spi)); |
| return 0; |
| } |
| |
| static struct spi_driver wm8985_spi_driver = { |
| .driver = { |
| .name = "wm8985", |
| .owner = THIS_MODULE, |
| }, |
| .probe = wm8985_spi_probe, |
| .remove = __devexit_p(wm8985_spi_remove) |
| }; |
| #endif |
| |
| #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) |
| static __devinit int wm8985_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct wm8985_priv *wm8985; |
| int ret; |
| |
| wm8985 = kzalloc(sizeof *wm8985, GFP_KERNEL); |
| if (!wm8985) |
| return -ENOMEM; |
| |
| wm8985->control_type = SND_SOC_I2C; |
| i2c_set_clientdata(i2c, wm8985); |
| |
| ret = snd_soc_register_codec(&i2c->dev, |
| &soc_codec_dev_wm8985, &wm8985_dai, 1); |
| if (ret < 0) |
| kfree(wm8985); |
| return ret; |
| } |
| |
| static __devexit int wm8985_i2c_remove(struct i2c_client *client) |
| { |
| snd_soc_unregister_codec(&client->dev); |
| kfree(i2c_get_clientdata(client)); |
| return 0; |
| } |
| |
| static const struct i2c_device_id wm8985_i2c_id[] = { |
| { "wm8985", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, wm8985_i2c_id); |
| |
| static struct i2c_driver wm8985_i2c_driver = { |
| .driver = { |
| .name = "wm8985", |
| .owner = THIS_MODULE, |
| }, |
| .probe = wm8985_i2c_probe, |
| .remove = __devexit_p(wm8985_i2c_remove), |
| .id_table = wm8985_i2c_id |
| }; |
| #endif |
| |
| static int __init wm8985_modinit(void) |
| { |
| int ret = 0; |
| |
| #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) |
| ret = i2c_add_driver(&wm8985_i2c_driver); |
| if (ret) { |
| printk(KERN_ERR "Failed to register wm8985 I2C driver: %d\n", |
| ret); |
| } |
| #endif |
| #if defined(CONFIG_SPI_MASTER) |
| ret = spi_register_driver(&wm8985_spi_driver); |
| if (ret != 0) { |
| printk(KERN_ERR "Failed to register wm8985 SPI driver: %d\n", |
| ret); |
| } |
| #endif |
| return ret; |
| } |
| module_init(wm8985_modinit); |
| |
| static void __exit wm8985_exit(void) |
| { |
| #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) |
| i2c_del_driver(&wm8985_i2c_driver); |
| #endif |
| #if defined(CONFIG_SPI_MASTER) |
| spi_unregister_driver(&wm8985_spi_driver); |
| #endif |
| } |
| module_exit(wm8985_exit); |
| |
| MODULE_DESCRIPTION("ASoC WM8985 driver"); |
| MODULE_AUTHOR("Dimitris Papastamos <dp@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |