| /* |
| * IOMMU implementation for Cell Broadband Processor Architecture |
| * |
| * (C) Copyright IBM Corporation 2006-2008 |
| * |
| * Author: Jeremy Kerr <jk@ozlabs.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/notifier.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| |
| #include <asm/prom.h> |
| #include <asm/iommu.h> |
| #include <asm/machdep.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/udbg.h> |
| #include <asm/lmb.h> |
| #include <asm/firmware.h> |
| #include <asm/cell-regs.h> |
| |
| #include "interrupt.h" |
| |
| /* Define CELL_IOMMU_REAL_UNMAP to actually unmap non-used pages |
| * instead of leaving them mapped to some dummy page. This can be |
| * enabled once the appropriate workarounds for spider bugs have |
| * been enabled |
| */ |
| #define CELL_IOMMU_REAL_UNMAP |
| |
| /* Define CELL_IOMMU_STRICT_PROTECTION to enforce protection of |
| * IO PTEs based on the transfer direction. That can be enabled |
| * once spider-net has been fixed to pass the correct direction |
| * to the DMA mapping functions |
| */ |
| #define CELL_IOMMU_STRICT_PROTECTION |
| |
| |
| #define NR_IOMMUS 2 |
| |
| /* IOC mmap registers */ |
| #define IOC_Reg_Size 0x2000 |
| |
| #define IOC_IOPT_CacheInvd 0x908 |
| #define IOC_IOPT_CacheInvd_NE_Mask 0xffe0000000000000ul |
| #define IOC_IOPT_CacheInvd_IOPTE_Mask 0x000003fffffffff8ul |
| #define IOC_IOPT_CacheInvd_Busy 0x0000000000000001ul |
| |
| #define IOC_IOST_Origin 0x918 |
| #define IOC_IOST_Origin_E 0x8000000000000000ul |
| #define IOC_IOST_Origin_HW 0x0000000000000800ul |
| #define IOC_IOST_Origin_HL 0x0000000000000400ul |
| |
| #define IOC_IO_ExcpStat 0x920 |
| #define IOC_IO_ExcpStat_V 0x8000000000000000ul |
| #define IOC_IO_ExcpStat_SPF_Mask 0x6000000000000000ul |
| #define IOC_IO_ExcpStat_SPF_S 0x6000000000000000ul |
| #define IOC_IO_ExcpStat_SPF_P 0x4000000000000000ul |
| #define IOC_IO_ExcpStat_ADDR_Mask 0x00000007fffff000ul |
| #define IOC_IO_ExcpStat_RW_Mask 0x0000000000000800ul |
| #define IOC_IO_ExcpStat_IOID_Mask 0x00000000000007fful |
| |
| #define IOC_IO_ExcpMask 0x928 |
| #define IOC_IO_ExcpMask_SFE 0x4000000000000000ul |
| #define IOC_IO_ExcpMask_PFE 0x2000000000000000ul |
| |
| #define IOC_IOCmd_Offset 0x1000 |
| |
| #define IOC_IOCmd_Cfg 0xc00 |
| #define IOC_IOCmd_Cfg_TE 0x0000800000000000ul |
| |
| |
| /* Segment table entries */ |
| #define IOSTE_V 0x8000000000000000ul /* valid */ |
| #define IOSTE_H 0x4000000000000000ul /* cache hint */ |
| #define IOSTE_PT_Base_RPN_Mask 0x3ffffffffffff000ul /* base RPN of IOPT */ |
| #define IOSTE_NPPT_Mask 0x0000000000000fe0ul /* no. pages in IOPT */ |
| #define IOSTE_PS_Mask 0x0000000000000007ul /* page size */ |
| #define IOSTE_PS_4K 0x0000000000000001ul /* - 4kB */ |
| #define IOSTE_PS_64K 0x0000000000000003ul /* - 64kB */ |
| #define IOSTE_PS_1M 0x0000000000000005ul /* - 1MB */ |
| #define IOSTE_PS_16M 0x0000000000000007ul /* - 16MB */ |
| |
| /* Page table entries */ |
| #define IOPTE_PP_W 0x8000000000000000ul /* protection: write */ |
| #define IOPTE_PP_R 0x4000000000000000ul /* protection: read */ |
| #define IOPTE_M 0x2000000000000000ul /* coherency required */ |
| #define IOPTE_SO_R 0x1000000000000000ul /* ordering: writes */ |
| #define IOPTE_SO_RW 0x1800000000000000ul /* ordering: r & w */ |
| #define IOPTE_RPN_Mask 0x07fffffffffff000ul /* RPN */ |
| #define IOPTE_H 0x0000000000000800ul /* cache hint */ |
| #define IOPTE_IOID_Mask 0x00000000000007fful /* ioid */ |
| |
| |
| /* IOMMU sizing */ |
| #define IO_SEGMENT_SHIFT 28 |
| #define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift)) |
| |
| /* The high bit needs to be set on every DMA address */ |
| #define SPIDER_DMA_OFFSET 0x80000000ul |
| |
| struct iommu_window { |
| struct list_head list; |
| struct cbe_iommu *iommu; |
| unsigned long offset; |
| unsigned long size; |
| unsigned int ioid; |
| struct iommu_table table; |
| }; |
| |
| #define NAMESIZE 8 |
| struct cbe_iommu { |
| int nid; |
| char name[NAMESIZE]; |
| void __iomem *xlate_regs; |
| void __iomem *cmd_regs; |
| unsigned long *stab; |
| unsigned long *ptab; |
| void *pad_page; |
| struct list_head windows; |
| }; |
| |
| /* Static array of iommus, one per node |
| * each contains a list of windows, keyed from dma_window property |
| * - on bus setup, look for a matching window, or create one |
| * - on dev setup, assign iommu_table ptr |
| */ |
| static struct cbe_iommu iommus[NR_IOMMUS]; |
| static int cbe_nr_iommus; |
| |
| static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte, |
| long n_ptes) |
| { |
| unsigned long __iomem *reg; |
| unsigned long val; |
| long n; |
| |
| reg = iommu->xlate_regs + IOC_IOPT_CacheInvd; |
| |
| while (n_ptes > 0) { |
| /* we can invalidate up to 1 << 11 PTEs at once */ |
| n = min(n_ptes, 1l << 11); |
| val = (((n /*- 1*/) << 53) & IOC_IOPT_CacheInvd_NE_Mask) |
| | (__pa(pte) & IOC_IOPT_CacheInvd_IOPTE_Mask) |
| | IOC_IOPT_CacheInvd_Busy; |
| |
| out_be64(reg, val); |
| while (in_be64(reg) & IOC_IOPT_CacheInvd_Busy) |
| ; |
| |
| n_ptes -= n; |
| pte += n; |
| } |
| } |
| |
| static void tce_build_cell(struct iommu_table *tbl, long index, long npages, |
| unsigned long uaddr, enum dma_data_direction direction) |
| { |
| int i; |
| unsigned long *io_pte, base_pte; |
| struct iommu_window *window = |
| container_of(tbl, struct iommu_window, table); |
| |
| /* implementing proper protection causes problems with the spidernet |
| * driver - check mapping directions later, but allow read & write by |
| * default for now.*/ |
| #ifdef CELL_IOMMU_STRICT_PROTECTION |
| /* to avoid referencing a global, we use a trick here to setup the |
| * protection bit. "prot" is setup to be 3 fields of 4 bits apprended |
| * together for each of the 3 supported direction values. It is then |
| * shifted left so that the fields matching the desired direction |
| * lands on the appropriate bits, and other bits are masked out. |
| */ |
| const unsigned long prot = 0xc48; |
| base_pte = |
| ((prot << (52 + 4 * direction)) & (IOPTE_PP_W | IOPTE_PP_R)) |
| | IOPTE_M | IOPTE_SO_RW | (window->ioid & IOPTE_IOID_Mask); |
| #else |
| base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | |
| (window->ioid & IOPTE_IOID_Mask); |
| #endif |
| |
| io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); |
| |
| for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE) |
| io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); |
| |
| mb(); |
| |
| invalidate_tce_cache(window->iommu, io_pte, npages); |
| |
| pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n", |
| index, npages, direction, base_pte); |
| } |
| |
| static void tce_free_cell(struct iommu_table *tbl, long index, long npages) |
| { |
| |
| int i; |
| unsigned long *io_pte, pte; |
| struct iommu_window *window = |
| container_of(tbl, struct iommu_window, table); |
| |
| pr_debug("tce_free_cell(index=%lx,n=%lx)\n", index, npages); |
| |
| #ifdef CELL_IOMMU_REAL_UNMAP |
| pte = 0; |
| #else |
| /* spider bridge does PCI reads after freeing - insert a mapping |
| * to a scratch page instead of an invalid entry */ |
| pte = IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | __pa(window->iommu->pad_page) |
| | (window->ioid & IOPTE_IOID_Mask); |
| #endif |
| |
| io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); |
| |
| for (i = 0; i < npages; i++) |
| io_pte[i] = pte; |
| |
| mb(); |
| |
| invalidate_tce_cache(window->iommu, io_pte, npages); |
| } |
| |
| static irqreturn_t ioc_interrupt(int irq, void *data) |
| { |
| unsigned long stat; |
| struct cbe_iommu *iommu = data; |
| |
| stat = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat); |
| |
| /* Might want to rate limit it */ |
| printk(KERN_ERR "iommu: DMA exception 0x%016lx\n", stat); |
| printk(KERN_ERR " V=%d, SPF=[%c%c], RW=%s, IOID=0x%04x\n", |
| !!(stat & IOC_IO_ExcpStat_V), |
| (stat & IOC_IO_ExcpStat_SPF_S) ? 'S' : ' ', |
| (stat & IOC_IO_ExcpStat_SPF_P) ? 'P' : ' ', |
| (stat & IOC_IO_ExcpStat_RW_Mask) ? "Read" : "Write", |
| (unsigned int)(stat & IOC_IO_ExcpStat_IOID_Mask)); |
| printk(KERN_ERR " page=0x%016lx\n", |
| stat & IOC_IO_ExcpStat_ADDR_Mask); |
| |
| /* clear interrupt */ |
| stat &= ~IOC_IO_ExcpStat_V; |
| out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, stat); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int cell_iommu_find_ioc(int nid, unsigned long *base) |
| { |
| struct device_node *np; |
| struct resource r; |
| |
| *base = 0; |
| |
| /* First look for new style /be nodes */ |
| for_each_node_by_name(np, "ioc") { |
| if (of_node_to_nid(np) != nid) |
| continue; |
| if (of_address_to_resource(np, 0, &r)) { |
| printk(KERN_ERR "iommu: can't get address for %s\n", |
| np->full_name); |
| continue; |
| } |
| *base = r.start; |
| of_node_put(np); |
| return 0; |
| } |
| |
| /* Ok, let's try the old way */ |
| for_each_node_by_type(np, "cpu") { |
| const unsigned int *nidp; |
| const unsigned long *tmp; |
| |
| nidp = of_get_property(np, "node-id", NULL); |
| if (nidp && *nidp == nid) { |
| tmp = of_get_property(np, "ioc-translation", NULL); |
| if (tmp) { |
| *base = *tmp; |
| of_node_put(np); |
| return 0; |
| } |
| } |
| } |
| |
| return -ENODEV; |
| } |
| |
| static void cell_iommu_setup_stab(struct cbe_iommu *iommu, |
| unsigned long dbase, unsigned long dsize, |
| unsigned long fbase, unsigned long fsize) |
| { |
| struct page *page; |
| unsigned long segments, stab_size; |
| |
| segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT; |
| |
| pr_debug("%s: iommu[%d]: segments: %lu\n", |
| __FUNCTION__, iommu->nid, segments); |
| |
| /* set up the segment table */ |
| stab_size = segments * sizeof(unsigned long); |
| page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size)); |
| BUG_ON(!page); |
| iommu->stab = page_address(page); |
| memset(iommu->stab, 0, stab_size); |
| } |
| |
| static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, |
| unsigned long base, unsigned long size, unsigned long gap_base, |
| unsigned long gap_size, unsigned long page_shift) |
| { |
| struct page *page; |
| int i; |
| unsigned long reg, segments, pages_per_segment, ptab_size, |
| n_pte_pages, start_seg, *ptab; |
| |
| start_seg = base >> IO_SEGMENT_SHIFT; |
| segments = size >> IO_SEGMENT_SHIFT; |
| pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift); |
| /* PTEs for each segment must start on a 4K bounday */ |
| pages_per_segment = max(pages_per_segment, |
| (1 << 12) / sizeof(unsigned long)); |
| |
| ptab_size = segments * pages_per_segment * sizeof(unsigned long); |
| pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__, |
| iommu->nid, ptab_size, get_order(ptab_size)); |
| page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size)); |
| BUG_ON(!page); |
| |
| ptab = page_address(page); |
| memset(ptab, 0, ptab_size); |
| |
| /* number of 4K pages needed for a page table */ |
| n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12; |
| |
| pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", |
| __FUNCTION__, iommu->nid, iommu->stab, ptab, |
| n_pte_pages); |
| |
| /* initialise the STEs */ |
| reg = IOSTE_V | ((n_pte_pages - 1) << 5); |
| |
| switch (page_shift) { |
| case 12: reg |= IOSTE_PS_4K; break; |
| case 16: reg |= IOSTE_PS_64K; break; |
| case 20: reg |= IOSTE_PS_1M; break; |
| case 24: reg |= IOSTE_PS_16M; break; |
| default: BUG(); |
| } |
| |
| gap_base = gap_base >> IO_SEGMENT_SHIFT; |
| gap_size = gap_size >> IO_SEGMENT_SHIFT; |
| |
| pr_debug("Setting up IOMMU stab:\n"); |
| for (i = start_seg; i < (start_seg + segments); i++) { |
| if (i >= gap_base && i < (gap_base + gap_size)) { |
| pr_debug("\toverlap at %d, skipping\n", i); |
| continue; |
| } |
| iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) * |
| (i - start_seg)); |
| pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]); |
| } |
| |
| return ptab; |
| } |
| |
| static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) |
| { |
| int ret; |
| unsigned long reg, xlate_base; |
| unsigned int virq; |
| |
| if (cell_iommu_find_ioc(iommu->nid, &xlate_base)) |
| panic("%s: missing IOC register mappings for node %d\n", |
| __FUNCTION__, iommu->nid); |
| |
| iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size); |
| iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset; |
| |
| /* ensure that the STEs have updated */ |
| mb(); |
| |
| /* setup interrupts for the iommu. */ |
| reg = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat); |
| out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, |
| reg & ~IOC_IO_ExcpStat_V); |
| out_be64(iommu->xlate_regs + IOC_IO_ExcpMask, |
| IOC_IO_ExcpMask_PFE | IOC_IO_ExcpMask_SFE); |
| |
| virq = irq_create_mapping(NULL, |
| IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT)); |
| BUG_ON(virq == NO_IRQ); |
| |
| ret = request_irq(virq, ioc_interrupt, IRQF_DISABLED, |
| iommu->name, iommu); |
| BUG_ON(ret); |
| |
| /* set the IOC segment table origin register (and turn on the iommu) */ |
| reg = IOC_IOST_Origin_E | __pa(iommu->stab) | IOC_IOST_Origin_HW; |
| out_be64(iommu->xlate_regs + IOC_IOST_Origin, reg); |
| in_be64(iommu->xlate_regs + IOC_IOST_Origin); |
| |
| /* turn on IO translation */ |
| reg = in_be64(iommu->cmd_regs + IOC_IOCmd_Cfg) | IOC_IOCmd_Cfg_TE; |
| out_be64(iommu->cmd_regs + IOC_IOCmd_Cfg, reg); |
| } |
| |
| static void cell_iommu_setup_hardware(struct cbe_iommu *iommu, |
| unsigned long base, unsigned long size) |
| { |
| cell_iommu_setup_stab(iommu, base, size, 0, 0); |
| iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0, |
| IOMMU_PAGE_SHIFT); |
| cell_iommu_enable_hardware(iommu); |
| } |
| |
| #if 0/* Unused for now */ |
| static struct iommu_window *find_window(struct cbe_iommu *iommu, |
| unsigned long offset, unsigned long size) |
| { |
| struct iommu_window *window; |
| |
| /* todo: check for overlapping (but not equal) windows) */ |
| |
| list_for_each_entry(window, &(iommu->windows), list) { |
| if (window->offset == offset && window->size == size) |
| return window; |
| } |
| |
| return NULL; |
| } |
| #endif |
| |
| static inline u32 cell_iommu_get_ioid(struct device_node *np) |
| { |
| const u32 *ioid; |
| |
| ioid = of_get_property(np, "ioid", NULL); |
| if (ioid == NULL) { |
| printk(KERN_WARNING "iommu: missing ioid for %s using 0\n", |
| np->full_name); |
| return 0; |
| } |
| |
| return *ioid; |
| } |
| |
| static struct iommu_window * __init |
| cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, |
| unsigned long offset, unsigned long size, |
| unsigned long pte_offset) |
| { |
| struct iommu_window *window; |
| struct page *page; |
| u32 ioid; |
| |
| ioid = cell_iommu_get_ioid(np); |
| |
| window = kmalloc_node(sizeof(*window), GFP_KERNEL, iommu->nid); |
| BUG_ON(window == NULL); |
| |
| window->offset = offset; |
| window->size = size; |
| window->ioid = ioid; |
| window->iommu = iommu; |
| |
| window->table.it_blocksize = 16; |
| window->table.it_base = (unsigned long)iommu->ptab; |
| window->table.it_index = iommu->nid; |
| window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + pte_offset; |
| window->table.it_size = size >> IOMMU_PAGE_SHIFT; |
| |
| iommu_init_table(&window->table, iommu->nid); |
| |
| pr_debug("\tioid %d\n", window->ioid); |
| pr_debug("\tblocksize %ld\n", window->table.it_blocksize); |
| pr_debug("\tbase 0x%016lx\n", window->table.it_base); |
| pr_debug("\toffset 0x%lx\n", window->table.it_offset); |
| pr_debug("\tsize %ld\n", window->table.it_size); |
| |
| list_add(&window->list, &iommu->windows); |
| |
| if (offset != 0) |
| return window; |
| |
| /* We need to map and reserve the first IOMMU page since it's used |
| * by the spider workaround. In theory, we only need to do that when |
| * running on spider but it doesn't really matter. |
| * |
| * This code also assumes that we have a window that starts at 0, |
| * which is the case on all spider based blades. |
| */ |
| page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); |
| BUG_ON(!page); |
| iommu->pad_page = page_address(page); |
| clear_page(iommu->pad_page); |
| |
| __set_bit(0, window->table.it_map); |
| tce_build_cell(&window->table, window->table.it_offset, 1, |
| (unsigned long)iommu->pad_page, DMA_TO_DEVICE); |
| window->table.it_hint = window->table.it_blocksize; |
| |
| return window; |
| } |
| |
| static struct cbe_iommu *cell_iommu_for_node(int nid) |
| { |
| int i; |
| |
| for (i = 0; i < cbe_nr_iommus; i++) |
| if (iommus[i].nid == nid) |
| return &iommus[i]; |
| return NULL; |
| } |
| |
| static unsigned long cell_dma_direct_offset; |
| |
| static unsigned long dma_iommu_fixed_base; |
| struct dma_mapping_ops dma_iommu_fixed_ops; |
| |
| static void cell_dma_dev_setup_iommu(struct device *dev) |
| { |
| struct iommu_window *window; |
| struct cbe_iommu *iommu; |
| struct dev_archdata *archdata = &dev->archdata; |
| |
| /* Current implementation uses the first window available in that |
| * node's iommu. We -might- do something smarter later though it may |
| * never be necessary |
| */ |
| iommu = cell_iommu_for_node(archdata->numa_node); |
| if (iommu == NULL || list_empty(&iommu->windows)) { |
| printk(KERN_ERR "iommu: missing iommu for %s (node %d)\n", |
| archdata->of_node ? archdata->of_node->full_name : "?", |
| archdata->numa_node); |
| return; |
| } |
| window = list_entry(iommu->windows.next, struct iommu_window, list); |
| |
| archdata->dma_data = &window->table; |
| } |
| |
| static void cell_dma_dev_setup_fixed(struct device *dev); |
| |
| static void cell_dma_dev_setup(struct device *dev) |
| { |
| struct dev_archdata *archdata = &dev->archdata; |
| |
| /* Order is important here, these are not mutually exclusive */ |
| if (get_dma_ops(dev) == &dma_iommu_fixed_ops) |
| cell_dma_dev_setup_fixed(dev); |
| else if (get_pci_dma_ops() == &dma_iommu_ops) |
| cell_dma_dev_setup_iommu(dev); |
| else if (get_pci_dma_ops() == &dma_direct_ops) |
| archdata->dma_data = (void *)cell_dma_direct_offset; |
| else |
| BUG(); |
| } |
| |
| static void cell_pci_dma_dev_setup(struct pci_dev *dev) |
| { |
| cell_dma_dev_setup(&dev->dev); |
| } |
| |
| static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action, |
| void *data) |
| { |
| struct device *dev = data; |
| |
| /* We are only intereted in device addition */ |
| if (action != BUS_NOTIFY_ADD_DEVICE) |
| return 0; |
| |
| /* We use the PCI DMA ops */ |
| dev->archdata.dma_ops = get_pci_dma_ops(); |
| |
| cell_dma_dev_setup(dev); |
| |
| return 0; |
| } |
| |
| static struct notifier_block cell_of_bus_notifier = { |
| .notifier_call = cell_of_bus_notify |
| }; |
| |
| static int __init cell_iommu_get_window(struct device_node *np, |
| unsigned long *base, |
| unsigned long *size) |
| { |
| const void *dma_window; |
| unsigned long index; |
| |
| /* Use ibm,dma-window if available, else, hard code ! */ |
| dma_window = of_get_property(np, "ibm,dma-window", NULL); |
| if (dma_window == NULL) { |
| *base = 0; |
| *size = 0x80000000u; |
| return -ENODEV; |
| } |
| |
| of_parse_dma_window(np, dma_window, &index, base, size); |
| return 0; |
| } |
| |
| static struct cbe_iommu * __init cell_iommu_alloc(struct device_node *np) |
| { |
| struct cbe_iommu *iommu; |
| int nid, i; |
| |
| /* Get node ID */ |
| nid = of_node_to_nid(np); |
| if (nid < 0) { |
| printk(KERN_ERR "iommu: failed to get node for %s\n", |
| np->full_name); |
| return NULL; |
| } |
| pr_debug("iommu: setting up iommu for node %d (%s)\n", |
| nid, np->full_name); |
| |
| /* XXX todo: If we can have multiple windows on the same IOMMU, which |
| * isn't the case today, we probably want here to check wether the |
| * iommu for that node is already setup. |
| * However, there might be issue with getting the size right so let's |
| * ignore that for now. We might want to completely get rid of the |
| * multiple window support since the cell iommu supports per-page ioids |
| */ |
| |
| if (cbe_nr_iommus >= NR_IOMMUS) { |
| printk(KERN_ERR "iommu: too many IOMMUs detected ! (%s)\n", |
| np->full_name); |
| return NULL; |
| } |
| |
| /* Init base fields */ |
| i = cbe_nr_iommus++; |
| iommu = &iommus[i]; |
| iommu->stab = NULL; |
| iommu->nid = nid; |
| snprintf(iommu->name, sizeof(iommu->name), "iommu%d", i); |
| INIT_LIST_HEAD(&iommu->windows); |
| |
| return iommu; |
| } |
| |
| static void __init cell_iommu_init_one(struct device_node *np, |
| unsigned long offset) |
| { |
| struct cbe_iommu *iommu; |
| unsigned long base, size; |
| |
| iommu = cell_iommu_alloc(np); |
| if (!iommu) |
| return; |
| |
| /* Obtain a window for it */ |
| cell_iommu_get_window(np, &base, &size); |
| |
| pr_debug("\ttranslating window 0x%lx...0x%lx\n", |
| base, base + size - 1); |
| |
| /* Initialize the hardware */ |
| cell_iommu_setup_hardware(iommu, base, size); |
| |
| /* Setup the iommu_table */ |
| cell_iommu_setup_window(iommu, np, base, size, |
| offset >> IOMMU_PAGE_SHIFT); |
| } |
| |
| static void __init cell_disable_iommus(void) |
| { |
| int node; |
| unsigned long base, val; |
| void __iomem *xregs, *cregs; |
| |
| /* Make sure IOC translation is disabled on all nodes */ |
| for_each_online_node(node) { |
| if (cell_iommu_find_ioc(node, &base)) |
| continue; |
| xregs = ioremap(base, IOC_Reg_Size); |
| if (xregs == NULL) |
| continue; |
| cregs = xregs + IOC_IOCmd_Offset; |
| |
| pr_debug("iommu: cleaning up iommu on node %d\n", node); |
| |
| out_be64(xregs + IOC_IOST_Origin, 0); |
| (void)in_be64(xregs + IOC_IOST_Origin); |
| val = in_be64(cregs + IOC_IOCmd_Cfg); |
| val &= ~IOC_IOCmd_Cfg_TE; |
| out_be64(cregs + IOC_IOCmd_Cfg, val); |
| (void)in_be64(cregs + IOC_IOCmd_Cfg); |
| |
| iounmap(xregs); |
| } |
| } |
| |
| static int __init cell_iommu_init_disabled(void) |
| { |
| struct device_node *np = NULL; |
| unsigned long base = 0, size; |
| |
| /* When no iommu is present, we use direct DMA ops */ |
| set_pci_dma_ops(&dma_direct_ops); |
| |
| /* First make sure all IOC translation is turned off */ |
| cell_disable_iommus(); |
| |
| /* If we have no Axon, we set up the spider DMA magic offset */ |
| if (of_find_node_by_name(NULL, "axon") == NULL) |
| cell_dma_direct_offset = SPIDER_DMA_OFFSET; |
| |
| /* Now we need to check to see where the memory is mapped |
| * in PCI space. We assume that all busses use the same dma |
| * window which is always the case so far on Cell, thus we |
| * pick up the first pci-internal node we can find and check |
| * the DMA window from there. |
| */ |
| for_each_node_by_name(np, "axon") { |
| if (np->parent == NULL || np->parent->parent != NULL) |
| continue; |
| if (cell_iommu_get_window(np, &base, &size) == 0) |
| break; |
| } |
| if (np == NULL) { |
| for_each_node_by_name(np, "pci-internal") { |
| if (np->parent == NULL || np->parent->parent != NULL) |
| continue; |
| if (cell_iommu_get_window(np, &base, &size) == 0) |
| break; |
| } |
| } |
| of_node_put(np); |
| |
| /* If we found a DMA window, we check if it's big enough to enclose |
| * all of physical memory. If not, we force enable IOMMU |
| */ |
| if (np && size < lmb_end_of_DRAM()) { |
| printk(KERN_WARNING "iommu: force-enabled, dma window" |
| " (%ldMB) smaller than total memory (%ldMB)\n", |
| size >> 20, lmb_end_of_DRAM() >> 20); |
| return -ENODEV; |
| } |
| |
| cell_dma_direct_offset += base; |
| |
| if (cell_dma_direct_offset != 0) |
| ppc_md.pci_dma_dev_setup = cell_pci_dma_dev_setup; |
| |
| printk("iommu: disabled, direct DMA offset is 0x%lx\n", |
| cell_dma_direct_offset); |
| |
| return 0; |
| } |
| |
| /* |
| * Fixed IOMMU mapping support |
| * |
| * This code adds support for setting up a fixed IOMMU mapping on certain |
| * cell machines. For 64-bit devices this avoids the performance overhead of |
| * mapping and unmapping pages at runtime. 32-bit devices are unable to use |
| * the fixed mapping. |
| * |
| * The fixed mapping is established at boot, and maps all of physical memory |
| * 1:1 into device space at some offset. On machines with < 30 GB of memory |
| * we setup the fixed mapping immediately above the normal IOMMU window. |
| * |
| * For example a machine with 4GB of memory would end up with the normal |
| * IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In |
| * this case a 64-bit device wishing to DMA to 1GB would be told to DMA to |
| * 3GB, plus any offset required by firmware. The firmware offset is encoded |
| * in the "dma-ranges" property. |
| * |
| * On machines with 30GB or more of memory, we are unable to place the fixed |
| * mapping above the normal IOMMU window as we would run out of address space. |
| * Instead we move the normal IOMMU window to coincide with the hash page |
| * table, this region does not need to be part of the fixed mapping as no |
| * device should ever be DMA'ing to it. We then setup the fixed mapping |
| * from 0 to 32GB. |
| */ |
| |
| static u64 cell_iommu_get_fixed_address(struct device *dev) |
| { |
| u64 cpu_addr, size, best_size, dev_addr = OF_BAD_ADDR; |
| struct device_node *np; |
| const u32 *ranges = NULL; |
| int i, len, best, naddr, nsize, pna, range_size; |
| |
| np = of_node_get(dev->archdata.of_node); |
| while (1) { |
| naddr = of_n_addr_cells(np); |
| nsize = of_n_size_cells(np); |
| np = of_get_next_parent(np); |
| if (!np) |
| break; |
| |
| ranges = of_get_property(np, "dma-ranges", &len); |
| |
| /* Ignore empty ranges, they imply no translation required */ |
| if (ranges && len > 0) |
| break; |
| } |
| |
| if (!ranges) { |
| dev_dbg(dev, "iommu: no dma-ranges found\n"); |
| goto out; |
| } |
| |
| len /= sizeof(u32); |
| |
| pna = of_n_addr_cells(np); |
| range_size = naddr + nsize + pna; |
| |
| /* dma-ranges format: |
| * child addr : naddr cells |
| * parent addr : pna cells |
| * size : nsize cells |
| */ |
| for (i = 0, best = -1, best_size = 0; i < len; i += range_size) { |
| cpu_addr = of_translate_dma_address(np, ranges + i + naddr); |
| size = of_read_number(ranges + i + naddr + pna, nsize); |
| |
| if (cpu_addr == 0 && size > best_size) { |
| best = i; |
| best_size = size; |
| } |
| } |
| |
| if (best >= 0) { |
| dev_addr = of_read_number(ranges + best, naddr); |
| } else |
| dev_dbg(dev, "iommu: no suitable range found!\n"); |
| |
| out: |
| of_node_put(np); |
| |
| return dev_addr; |
| } |
| |
| static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask) |
| { |
| if (!dev->dma_mask || !dma_supported(dev, dma_mask)) |
| return -EIO; |
| |
| if (dma_mask == DMA_BIT_MASK(64) && |
| cell_iommu_get_fixed_address(dev) != OF_BAD_ADDR) |
| { |
| dev_dbg(dev, "iommu: 64-bit OK, using fixed ops\n"); |
| set_dma_ops(dev, &dma_iommu_fixed_ops); |
| } else { |
| dev_dbg(dev, "iommu: not 64-bit, using default ops\n"); |
| set_dma_ops(dev, get_pci_dma_ops()); |
| } |
| |
| cell_dma_dev_setup(dev); |
| |
| *dev->dma_mask = dma_mask; |
| |
| return 0; |
| } |
| |
| static void cell_dma_dev_setup_fixed(struct device *dev) |
| { |
| struct dev_archdata *archdata = &dev->archdata; |
| u64 addr; |
| |
| addr = cell_iommu_get_fixed_address(dev) + dma_iommu_fixed_base; |
| archdata->dma_data = (void *)addr; |
| |
| dev_dbg(dev, "iommu: fixed addr = %lx\n", addr); |
| } |
| |
| static void insert_16M_pte(unsigned long addr, unsigned long *ptab, |
| unsigned long base_pte) |
| { |
| unsigned long segment, offset; |
| |
| segment = addr >> IO_SEGMENT_SHIFT; |
| offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24)); |
| ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long)); |
| |
| pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n", |
| addr, ptab, segment, offset); |
| |
| ptab[offset] = base_pte | (__pa(addr) & IOPTE_RPN_Mask); |
| } |
| |
| static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, |
| struct device_node *np, unsigned long dbase, unsigned long dsize, |
| unsigned long fbase, unsigned long fsize) |
| { |
| unsigned long base_pte, uaddr, ioaddr, *ptab; |
| |
| ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24); |
| |
| dma_iommu_fixed_base = fbase; |
| |
| pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase); |
| |
| base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW |
| | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask); |
| |
| for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) { |
| /* Don't touch the dynamic region */ |
| ioaddr = uaddr + fbase; |
| if (ioaddr >= dbase && ioaddr < (dbase + dsize)) { |
| pr_debug("iommu: fixed/dynamic overlap, skipping\n"); |
| continue; |
| } |
| |
| insert_16M_pte(uaddr, ptab, base_pte); |
| } |
| |
| mb(); |
| } |
| |
| static int __init cell_iommu_fixed_mapping_init(void) |
| { |
| unsigned long dbase, dsize, fbase, fsize, hbase, hend; |
| struct cbe_iommu *iommu; |
| struct device_node *np; |
| |
| /* The fixed mapping is only supported on axon machines */ |
| np = of_find_node_by_name(NULL, "axon"); |
| if (!np) { |
| pr_debug("iommu: fixed mapping disabled, no axons found\n"); |
| return -1; |
| } |
| |
| /* We must have dma-ranges properties for fixed mapping to work */ |
| for (np = NULL; (np = of_find_all_nodes(np));) { |
| if (of_find_property(np, "dma-ranges", NULL)) |
| break; |
| } |
| of_node_put(np); |
| |
| if (!np) { |
| pr_debug("iommu: no dma-ranges found, no fixed mapping\n"); |
| return -1; |
| } |
| |
| /* The default setup is to have the fixed mapping sit after the |
| * dynamic region, so find the top of the largest IOMMU window |
| * on any axon, then add the size of RAM and that's our max value. |
| * If that is > 32GB we have to do other shennanigans. |
| */ |
| fbase = 0; |
| for_each_node_by_name(np, "axon") { |
| cell_iommu_get_window(np, &dbase, &dsize); |
| fbase = max(fbase, dbase + dsize); |
| } |
| |
| fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT); |
| fsize = lmb_phys_mem_size(); |
| |
| if ((fbase + fsize) <= 0x800000000) |
| hbase = 0; /* use the device tree window */ |
| else { |
| /* If we're over 32 GB we need to cheat. We can't map all of |
| * RAM with the fixed mapping, and also fit the dynamic |
| * region. So try to place the dynamic region where the hash |
| * table sits, drivers never need to DMA to it, we don't |
| * need a fixed mapping for that area. |
| */ |
| if (!htab_address) { |
| pr_debug("iommu: htab is NULL, on LPAR? Huh?\n"); |
| return -1; |
| } |
| hbase = __pa(htab_address); |
| hend = hbase + htab_size_bytes; |
| |
| /* The window must start and end on a segment boundary */ |
| if ((hbase != _ALIGN_UP(hbase, 1 << IO_SEGMENT_SHIFT)) || |
| (hend != _ALIGN_UP(hend, 1 << IO_SEGMENT_SHIFT))) { |
| pr_debug("iommu: hash window not segment aligned\n"); |
| return -1; |
| } |
| |
| /* Check the hash window fits inside the real DMA window */ |
| for_each_node_by_name(np, "axon") { |
| cell_iommu_get_window(np, &dbase, &dsize); |
| |
| if (hbase < dbase || (hend > (dbase + dsize))) { |
| pr_debug("iommu: hash window doesn't fit in" |
| "real DMA window\n"); |
| return -1; |
| } |
| } |
| |
| fbase = 0; |
| } |
| |
| /* Setup the dynamic regions */ |
| for_each_node_by_name(np, "axon") { |
| iommu = cell_iommu_alloc(np); |
| BUG_ON(!iommu); |
| |
| if (hbase == 0) |
| cell_iommu_get_window(np, &dbase, &dsize); |
| else { |
| dbase = hbase; |
| dsize = htab_size_bytes; |
| } |
| |
| printk(KERN_DEBUG "iommu: node %d, dynamic window 0x%lx-0x%lx " |
| "fixed window 0x%lx-0x%lx\n", iommu->nid, dbase, |
| dbase + dsize, fbase, fbase + fsize); |
| |
| cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); |
| iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0, |
| IOMMU_PAGE_SHIFT); |
| cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, |
| fbase, fsize); |
| cell_iommu_enable_hardware(iommu); |
| cell_iommu_setup_window(iommu, np, dbase, dsize, 0); |
| } |
| |
| dma_iommu_fixed_ops = dma_direct_ops; |
| dma_iommu_fixed_ops.set_dma_mask = dma_set_mask_and_switch; |
| |
| dma_iommu_ops.set_dma_mask = dma_set_mask_and_switch; |
| set_pci_dma_ops(&dma_iommu_ops); |
| |
| return 0; |
| } |
| |
| static int iommu_fixed_disabled; |
| |
| static int __init setup_iommu_fixed(char *str) |
| { |
| if (strcmp(str, "off") == 0) |
| iommu_fixed_disabled = 1; |
| |
| return 1; |
| } |
| __setup("iommu_fixed=", setup_iommu_fixed); |
| |
| static int __init cell_iommu_init(void) |
| { |
| struct device_node *np; |
| |
| /* If IOMMU is disabled or we have little enough RAM to not need |
| * to enable it, we setup a direct mapping. |
| * |
| * Note: should we make sure we have the IOMMU actually disabled ? |
| */ |
| if (iommu_is_off || |
| (!iommu_force_on && lmb_end_of_DRAM() <= 0x80000000ull)) |
| if (cell_iommu_init_disabled() == 0) |
| goto bail; |
| |
| /* Setup various ppc_md. callbacks */ |
| ppc_md.pci_dma_dev_setup = cell_pci_dma_dev_setup; |
| ppc_md.tce_build = tce_build_cell; |
| ppc_md.tce_free = tce_free_cell; |
| |
| if (!iommu_fixed_disabled && cell_iommu_fixed_mapping_init() == 0) |
| goto bail; |
| |
| /* Create an iommu for each /axon node. */ |
| for_each_node_by_name(np, "axon") { |
| if (np->parent == NULL || np->parent->parent != NULL) |
| continue; |
| cell_iommu_init_one(np, 0); |
| } |
| |
| /* Create an iommu for each toplevel /pci-internal node for |
| * old hardware/firmware |
| */ |
| for_each_node_by_name(np, "pci-internal") { |
| if (np->parent == NULL || np->parent->parent != NULL) |
| continue; |
| cell_iommu_init_one(np, SPIDER_DMA_OFFSET); |
| } |
| |
| /* Setup default PCI iommu ops */ |
| set_pci_dma_ops(&dma_iommu_ops); |
| |
| bail: |
| /* Register callbacks on OF platform device addition/removal |
| * to handle linking them to the right DMA operations |
| */ |
| bus_register_notifier(&of_platform_bus_type, &cell_of_bus_notifier); |
| |
| return 0; |
| } |
| machine_arch_initcall(cell, cell_iommu_init); |
| machine_arch_initcall(celleb_native, cell_iommu_init); |
| |