| /* |
| * Block driver for media (i.e., flash cards) |
| * |
| * Copyright 2002 Hewlett-Packard Company |
| * |
| * Use consistent with the GNU GPL is permitted, |
| * provided that this copyright notice is |
| * preserved in its entirety in all copies and derived works. |
| * |
| * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, |
| * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS |
| * FITNESS FOR ANY PARTICULAR PURPOSE. |
| * |
| * Many thanks to Alessandro Rubini and Jonathan Corbet! |
| * |
| * Author: Andrew Christian |
| * 28 May 2002 |
| */ |
| #include <linux/moduleparam.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/fs.h> |
| #include <linux/errno.h> |
| #include <linux/hdreg.h> |
| #include <linux/kdev_t.h> |
| #include <linux/blkdev.h> |
| #include <linux/mutex.h> |
| |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/protocol.h> |
| #include <linux/mmc/host.h> |
| |
| #include <asm/system.h> |
| #include <asm/uaccess.h> |
| |
| #include "mmc_queue.h" |
| |
| /* |
| * max 8 partitions per card |
| */ |
| #define MMC_SHIFT 3 |
| |
| static int major; |
| |
| /* |
| * There is one mmc_blk_data per slot. |
| */ |
| struct mmc_blk_data { |
| spinlock_t lock; |
| struct gendisk *disk; |
| struct mmc_queue queue; |
| |
| unsigned int usage; |
| unsigned int block_bits; |
| unsigned int read_only; |
| }; |
| |
| static DEFINE_MUTEX(open_lock); |
| |
| static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) |
| { |
| struct mmc_blk_data *md; |
| |
| mutex_lock(&open_lock); |
| md = disk->private_data; |
| if (md && md->usage == 0) |
| md = NULL; |
| if (md) |
| md->usage++; |
| mutex_unlock(&open_lock); |
| |
| return md; |
| } |
| |
| static void mmc_blk_put(struct mmc_blk_data *md) |
| { |
| mutex_lock(&open_lock); |
| md->usage--; |
| if (md->usage == 0) { |
| put_disk(md->disk); |
| mmc_cleanup_queue(&md->queue); |
| kfree(md); |
| } |
| mutex_unlock(&open_lock); |
| } |
| |
| static int mmc_blk_open(struct inode *inode, struct file *filp) |
| { |
| struct mmc_blk_data *md; |
| int ret = -ENXIO; |
| |
| md = mmc_blk_get(inode->i_bdev->bd_disk); |
| if (md) { |
| if (md->usage == 2) |
| check_disk_change(inode->i_bdev); |
| ret = 0; |
| |
| if ((filp->f_mode & FMODE_WRITE) && md->read_only) |
| ret = -EROFS; |
| } |
| |
| return ret; |
| } |
| |
| static int mmc_blk_release(struct inode *inode, struct file *filp) |
| { |
| struct mmc_blk_data *md = inode->i_bdev->bd_disk->private_data; |
| |
| mmc_blk_put(md); |
| return 0; |
| } |
| |
| static int |
| mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo) |
| { |
| geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16); |
| geo->heads = 4; |
| geo->sectors = 16; |
| return 0; |
| } |
| |
| static struct block_device_operations mmc_bdops = { |
| .open = mmc_blk_open, |
| .release = mmc_blk_release, |
| .getgeo = mmc_blk_getgeo, |
| .owner = THIS_MODULE, |
| }; |
| |
| struct mmc_blk_request { |
| struct mmc_request mrq; |
| struct mmc_command cmd; |
| struct mmc_command stop; |
| struct mmc_data data; |
| }; |
| |
| static int mmc_blk_prep_rq(struct mmc_queue *mq, struct request *req) |
| { |
| struct mmc_blk_data *md = mq->data; |
| int stat = BLKPREP_OK; |
| |
| /* |
| * If we have no device, we haven't finished initialising. |
| */ |
| if (!md || !mq->card) { |
| printk(KERN_ERR "%s: killing request - no device/host\n", |
| req->rq_disk->disk_name); |
| stat = BLKPREP_KILL; |
| } |
| |
| return stat; |
| } |
| |
| static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) |
| { |
| struct mmc_blk_data *md = mq->data; |
| struct mmc_card *card = md->queue.card; |
| struct mmc_blk_request brq; |
| int ret; |
| |
| if (mmc_card_claim_host(card)) |
| goto cmd_err; |
| |
| do { |
| struct mmc_command cmd; |
| u32 readcmd, writecmd; |
| |
| memset(&brq, 0, sizeof(struct mmc_blk_request)); |
| brq.mrq.cmd = &brq.cmd; |
| brq.mrq.data = &brq.data; |
| |
| brq.cmd.arg = req->sector << 9; |
| brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; |
| brq.data.blksz = 1 << md->block_bits; |
| brq.data.blocks = req->nr_sectors >> (md->block_bits - 9); |
| brq.stop.opcode = MMC_STOP_TRANSMISSION; |
| brq.stop.arg = 0; |
| brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC; |
| |
| mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ); |
| |
| /* |
| * If the host doesn't support multiple block writes, force |
| * block writes to single block. |
| */ |
| if (rq_data_dir(req) != READ && |
| !(card->host->caps & MMC_CAP_MULTIWRITE)) |
| brq.data.blocks = 1; |
| |
| if (brq.data.blocks > 1) { |
| brq.data.flags |= MMC_DATA_MULTI; |
| brq.mrq.stop = &brq.stop; |
| readcmd = MMC_READ_MULTIPLE_BLOCK; |
| writecmd = MMC_WRITE_MULTIPLE_BLOCK; |
| } else { |
| brq.mrq.stop = NULL; |
| readcmd = MMC_READ_SINGLE_BLOCK; |
| writecmd = MMC_WRITE_BLOCK; |
| } |
| |
| if (rq_data_dir(req) == READ) { |
| brq.cmd.opcode = readcmd; |
| brq.data.flags |= MMC_DATA_READ; |
| } else { |
| brq.cmd.opcode = writecmd; |
| brq.data.flags |= MMC_DATA_WRITE; |
| } |
| |
| brq.data.sg = mq->sg; |
| brq.data.sg_len = blk_rq_map_sg(req->q, req, brq.data.sg); |
| |
| mmc_wait_for_req(card->host, &brq.mrq); |
| if (brq.cmd.error) { |
| printk(KERN_ERR "%s: error %d sending read/write command\n", |
| req->rq_disk->disk_name, brq.cmd.error); |
| goto cmd_err; |
| } |
| |
| if (brq.data.error) { |
| printk(KERN_ERR "%s: error %d transferring data\n", |
| req->rq_disk->disk_name, brq.data.error); |
| goto cmd_err; |
| } |
| |
| if (brq.stop.error) { |
| printk(KERN_ERR "%s: error %d sending stop command\n", |
| req->rq_disk->disk_name, brq.stop.error); |
| goto cmd_err; |
| } |
| |
| if (rq_data_dir(req) != READ) { |
| do { |
| int err; |
| |
| cmd.opcode = MMC_SEND_STATUS; |
| cmd.arg = card->rca << 16; |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; |
| err = mmc_wait_for_cmd(card->host, &cmd, 5); |
| if (err) { |
| printk(KERN_ERR "%s: error %d requesting status\n", |
| req->rq_disk->disk_name, err); |
| goto cmd_err; |
| } |
| } while (!(cmd.resp[0] & R1_READY_FOR_DATA)); |
| |
| #if 0 |
| if (cmd.resp[0] & ~0x00000900) |
| printk(KERN_ERR "%s: status = %08x\n", |
| req->rq_disk->disk_name, cmd.resp[0]); |
| if (mmc_decode_status(cmd.resp)) |
| goto cmd_err; |
| #endif |
| } |
| |
| /* |
| * A block was successfully transferred. |
| */ |
| spin_lock_irq(&md->lock); |
| ret = end_that_request_chunk(req, 1, brq.data.bytes_xfered); |
| if (!ret) { |
| /* |
| * The whole request completed successfully. |
| */ |
| add_disk_randomness(req->rq_disk); |
| blkdev_dequeue_request(req); |
| end_that_request_last(req, 1); |
| } |
| spin_unlock_irq(&md->lock); |
| } while (ret); |
| |
| mmc_card_release_host(card); |
| |
| return 1; |
| |
| cmd_err: |
| mmc_card_release_host(card); |
| |
| ret = 1; |
| |
| /* |
| * For writes and where the host claims to support proper |
| * error reporting, we first ok the successful blocks. |
| * |
| * For reads we just fail the entire chunk as that should |
| * be safe in all cases. |
| */ |
| if (rq_data_dir(req) != READ && |
| (card->host->caps & MMC_CAP_MULTIWRITE)) { |
| spin_lock_irq(&md->lock); |
| ret = end_that_request_chunk(req, 1, brq.data.bytes_xfered); |
| spin_unlock_irq(&md->lock); |
| } |
| |
| spin_lock_irq(&md->lock); |
| while (ret) { |
| ret = end_that_request_chunk(req, 0, |
| req->current_nr_sectors << 9); |
| } |
| |
| add_disk_randomness(req->rq_disk); |
| blkdev_dequeue_request(req); |
| end_that_request_last(req, 0); |
| spin_unlock_irq(&md->lock); |
| |
| return 0; |
| } |
| |
| #define MMC_NUM_MINORS (256 >> MMC_SHIFT) |
| |
| static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))]; |
| |
| static inline int mmc_blk_readonly(struct mmc_card *card) |
| { |
| return mmc_card_readonly(card) || |
| !(card->csd.cmdclass & CCC_BLOCK_WRITE); |
| } |
| |
| static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) |
| { |
| struct mmc_blk_data *md; |
| int devidx, ret; |
| |
| devidx = find_first_zero_bit(dev_use, MMC_NUM_MINORS); |
| if (devidx >= MMC_NUM_MINORS) |
| return ERR_PTR(-ENOSPC); |
| __set_bit(devidx, dev_use); |
| |
| md = kmalloc(sizeof(struct mmc_blk_data), GFP_KERNEL); |
| if (!md) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| memset(md, 0, sizeof(struct mmc_blk_data)); |
| |
| /* |
| * Set the read-only status based on the supported commands |
| * and the write protect switch. |
| */ |
| md->read_only = mmc_blk_readonly(card); |
| |
| /* |
| * Both SD and MMC specifications state (although a bit |
| * unclearly in the MMC case) that a block size of 512 |
| * bytes must always be supported by the card. |
| */ |
| md->block_bits = 9; |
| |
| md->disk = alloc_disk(1 << MMC_SHIFT); |
| if (md->disk == NULL) { |
| ret = -ENOMEM; |
| goto err_kfree; |
| } |
| |
| spin_lock_init(&md->lock); |
| md->usage = 1; |
| |
| ret = mmc_init_queue(&md->queue, card, &md->lock); |
| if (ret) |
| goto err_putdisk; |
| |
| md->queue.prep_fn = mmc_blk_prep_rq; |
| md->queue.issue_fn = mmc_blk_issue_rq; |
| md->queue.data = md; |
| |
| md->disk->major = major; |
| md->disk->first_minor = devidx << MMC_SHIFT; |
| md->disk->fops = &mmc_bdops; |
| md->disk->private_data = md; |
| md->disk->queue = md->queue.queue; |
| md->disk->driverfs_dev = &card->dev; |
| |
| /* |
| * As discussed on lkml, GENHD_FL_REMOVABLE should: |
| * |
| * - be set for removable media with permanent block devices |
| * - be unset for removable block devices with permanent media |
| * |
| * Since MMC block devices clearly fall under the second |
| * case, we do not set GENHD_FL_REMOVABLE. Userspace |
| * should use the block device creation/destruction hotplug |
| * messages to tell when the card is present. |
| */ |
| |
| sprintf(md->disk->disk_name, "mmcblk%d", devidx); |
| |
| blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits); |
| |
| /* |
| * The CSD capacity field is in units of read_blkbits. |
| * set_capacity takes units of 512 bytes. |
| */ |
| set_capacity(md->disk, card->csd.capacity << (card->csd.read_blkbits - 9)); |
| return md; |
| |
| err_putdisk: |
| put_disk(md->disk); |
| err_kfree: |
| kfree(md); |
| out: |
| return ERR_PTR(ret); |
| } |
| |
| static int |
| mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card) |
| { |
| struct mmc_command cmd; |
| int err; |
| |
| mmc_card_claim_host(card); |
| cmd.opcode = MMC_SET_BLOCKLEN; |
| cmd.arg = 1 << md->block_bits; |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; |
| err = mmc_wait_for_cmd(card->host, &cmd, 5); |
| mmc_card_release_host(card); |
| |
| if (err) { |
| printk(KERN_ERR "%s: unable to set block size to %d: %d\n", |
| md->disk->disk_name, cmd.arg, err); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int mmc_blk_probe(struct mmc_card *card) |
| { |
| struct mmc_blk_data *md; |
| int err; |
| |
| /* |
| * Check that the card supports the command class(es) we need. |
| */ |
| if (!(card->csd.cmdclass & CCC_BLOCK_READ)) |
| return -ENODEV; |
| |
| md = mmc_blk_alloc(card); |
| if (IS_ERR(md)) |
| return PTR_ERR(md); |
| |
| err = mmc_blk_set_blksize(md, card); |
| if (err) |
| goto out; |
| |
| printk(KERN_INFO "%s: %s %s %lluKiB %s\n", |
| md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), |
| (unsigned long long)(get_capacity(md->disk) >> 1), |
| md->read_only ? "(ro)" : ""); |
| |
| mmc_set_drvdata(card, md); |
| add_disk(md->disk); |
| return 0; |
| |
| out: |
| mmc_blk_put(md); |
| |
| return err; |
| } |
| |
| static void mmc_blk_remove(struct mmc_card *card) |
| { |
| struct mmc_blk_data *md = mmc_get_drvdata(card); |
| |
| if (md) { |
| int devidx; |
| |
| del_gendisk(md->disk); |
| |
| /* |
| * I think this is needed. |
| */ |
| md->disk->queue = NULL; |
| |
| devidx = md->disk->first_minor >> MMC_SHIFT; |
| __clear_bit(devidx, dev_use); |
| |
| mmc_blk_put(md); |
| } |
| mmc_set_drvdata(card, NULL); |
| } |
| |
| #ifdef CONFIG_PM |
| static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state) |
| { |
| struct mmc_blk_data *md = mmc_get_drvdata(card); |
| |
| if (md) { |
| mmc_queue_suspend(&md->queue); |
| } |
| return 0; |
| } |
| |
| static int mmc_blk_resume(struct mmc_card *card) |
| { |
| struct mmc_blk_data *md = mmc_get_drvdata(card); |
| |
| if (md) { |
| mmc_blk_set_blksize(md, card); |
| mmc_queue_resume(&md->queue); |
| } |
| return 0; |
| } |
| #else |
| #define mmc_blk_suspend NULL |
| #define mmc_blk_resume NULL |
| #endif |
| |
| static struct mmc_driver mmc_driver = { |
| .drv = { |
| .name = "mmcblk", |
| }, |
| .probe = mmc_blk_probe, |
| .remove = mmc_blk_remove, |
| .suspend = mmc_blk_suspend, |
| .resume = mmc_blk_resume, |
| }; |
| |
| static int __init mmc_blk_init(void) |
| { |
| int res = -ENOMEM; |
| |
| res = register_blkdev(major, "mmc"); |
| if (res < 0) { |
| printk(KERN_WARNING "Unable to get major %d for MMC media: %d\n", |
| major, res); |
| goto out; |
| } |
| if (major == 0) |
| major = res; |
| |
| return mmc_register_driver(&mmc_driver); |
| |
| out: |
| return res; |
| } |
| |
| static void __exit mmc_blk_exit(void) |
| { |
| mmc_unregister_driver(&mmc_driver); |
| unregister_blkdev(major, "mmc"); |
| } |
| |
| module_init(mmc_blk_init); |
| module_exit(mmc_blk_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver"); |
| |
| module_param(major, int, 0444); |
| MODULE_PARM_DESC(major, "specify the major device number for MMC block driver"); |