| /* |
| * include/asm-arm/arch-pnx4008/clock.h |
| * |
| * Clock control driver for PNX4008 - header file |
| * |
| * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> |
| * |
| * 2005 (c) MontaVista Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| #ifndef __PNX4008_CLOCK_H__ |
| #define __PNX4008_CLOCK_H__ |
| |
| struct module; |
| struct clk; |
| |
| #define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE) |
| #define HCLKDIVCTRL_REG (PWRMAN_VA_BASE + 0x40) |
| #define PWRCTRL_REG (PWRMAN_VA_BASE + 0x44) |
| #define PLLCTRL_REG (PWRMAN_VA_BASE + 0x48) |
| #define OSC13CTRL_REG (PWRMAN_VA_BASE + 0x4c) |
| #define SYSCLKCTRL_REG (PWRMAN_VA_BASE + 0x50) |
| #define HCLKPLLCTRL_REG (PWRMAN_VA_BASE + 0x58) |
| #define USBCTRL_REG (PWRMAN_VA_BASE + 0x64) |
| #define SDRAMCLKCTRL_REG (PWRMAN_VA_BASE + 0x68) |
| #define MSCTRL_REG (PWRMAN_VA_BASE + 0x80) |
| #define BTCLKCTRL (PWRMAN_VA_BASE + 0x84) |
| #define DUMCLKCTRL_REG (PWRMAN_VA_BASE + 0x90) |
| #define I2CCLKCTRL_REG (PWRMAN_VA_BASE + 0xac) |
| #define KEYCLKCTRL_REG (PWRMAN_VA_BASE + 0xb0) |
| #define TSCLKCTRL_REG (PWRMAN_VA_BASE + 0xb4) |
| #define PWMCLKCTRL_REG (PWRMAN_VA_BASE + 0xb8) |
| #define SPICTRL_REG (PWRMAN_VA_BASE + 0xc4) |
| #define FLASHCLKCTRL_REG (PWRMAN_VA_BASE + 0xc8) |
| #define UART3CLK_REG (PWRMAN_VA_BASE + 0xd0) |
| #define UARTCLKCTRL_REG (PWRMAN_VA_BASE + 0xe4) |
| #define DMACLKCTRL_REG (PWRMAN_VA_BASE + 0xe8) |
| #define AUTOCLK_CTRL (PWRMAN_VA_BASE + 0xec) |
| #define JPEGCLKCTRL_REG (PWRMAN_VA_BASE + 0xfc) |
| |
| #define AUDIOCONFIG_VA_BASE IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE) |
| #define DSPPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x60) |
| #define DSPCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x64) |
| #define AUDIOCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x68) |
| #define AUDIOPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x6C) |
| |
| #define USB_OTG_CLKCTRL_REG IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4) |
| |
| #define VFP9CLKCTRL_REG IO_ADDRESS(PNX4008_DEBUG_BASE) |
| |
| #define CLK_RATE_13MHZ 13000 |
| #define CLK_RATE_1MHZ 1000 |
| #define CLK_RATE_208MHZ 208000 |
| #define CLK_RATE_48MHZ 48000 |
| #define CLK_RATE_32KHZ 32 |
| |
| #define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */ |
| |
| #endif |