| /* |
| * xHCI host controller driver |
| * |
| * Copyright (C) 2008 Intel Corp. |
| * |
| * Author: Sarah Sharp |
| * Some code borrowed from the Linux EHCI driver. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* |
| * Ring initialization rules: |
| * 1. Each segment is initialized to zero, except for link TRBs. |
| * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or |
| * Consumer Cycle State (CCS), depending on ring function. |
| * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment. |
| * |
| * Ring behavior rules: |
| * 1. A ring is empty if enqueue == dequeue. This means there will always be at |
| * least one free TRB in the ring. This is useful if you want to turn that |
| * into a link TRB and expand the ring. |
| * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a |
| * link TRB, then load the pointer with the address in the link TRB. If the |
| * link TRB had its toggle bit set, you may need to update the ring cycle |
| * state (see cycle bit rules). You may have to do this multiple times |
| * until you reach a non-link TRB. |
| * 3. A ring is full if enqueue++ (for the definition of increment above) |
| * equals the dequeue pointer. |
| * |
| * Cycle bit rules: |
| * 1. When a consumer increments a dequeue pointer and encounters a toggle bit |
| * in a link TRB, it must toggle the ring cycle state. |
| * 2. When a producer increments an enqueue pointer and encounters a toggle bit |
| * in a link TRB, it must toggle the ring cycle state. |
| * |
| * Producer rules: |
| * 1. Check if ring is full before you enqueue. |
| * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing. |
| * Update enqueue pointer between each write (which may update the ring |
| * cycle state). |
| * 3. Notify consumer. If SW is producer, it rings the doorbell for command |
| * and endpoint rings. If HC is the producer for the event ring, |
| * and it generates an interrupt according to interrupt modulation rules. |
| * |
| * Consumer rules: |
| * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state, |
| * the TRB is owned by the consumer. |
| * 2. Update dequeue pointer (which may update the ring cycle state) and |
| * continue processing TRBs until you reach a TRB which is not owned by you. |
| * 3. Notify the producer. SW is the consumer for the event ring, and it |
| * updates event ring dequeue pointer. HC is the consumer for the command and |
| * endpoint rings; it generates events on the event ring for these. |
| */ |
| |
| #include "xhci.h" |
| |
| /* |
| * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA |
| * address of the TRB. |
| */ |
| dma_addr_t trb_virt_to_dma(struct xhci_segment *seg, |
| union xhci_trb *trb) |
| { |
| unsigned int offset; |
| |
| if (!seg || !trb || (void *) trb < (void *) seg->trbs) |
| return 0; |
| /* offset in bytes, since these are byte-addressable */ |
| offset = (unsigned int) trb - (unsigned int) seg->trbs; |
| /* SEGMENT_SIZE in bytes, trbs are 16-byte aligned */ |
| if (offset > SEGMENT_SIZE || (offset % sizeof(*trb)) != 0) |
| return 0; |
| return seg->dma + offset; |
| } |
| |
| /* Does this link TRB point to the first segment in a ring, |
| * or was the previous TRB the last TRB on the last segment in the ERST? |
| */ |
| static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring, |
| struct xhci_segment *seg, union xhci_trb *trb) |
| { |
| if (ring == xhci->event_ring) |
| return (trb == &seg->trbs[TRBS_PER_SEGMENT]) && |
| (seg->next == xhci->event_ring->first_seg); |
| else |
| return trb->link.control & LINK_TOGGLE; |
| } |
| |
| /* Is this TRB a link TRB or was the last TRB the last TRB in this event ring |
| * segment? I.e. would the updated event TRB pointer step off the end of the |
| * event seg? |
| */ |
| static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, |
| struct xhci_segment *seg, union xhci_trb *trb) |
| { |
| if (ring == xhci->event_ring) |
| return trb == &seg->trbs[TRBS_PER_SEGMENT]; |
| else |
| return (trb->link.control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK); |
| } |
| |
| /* |
| * See Cycle bit rules. SW is the consumer for the event ring only. |
| * Don't make a ring full of link TRBs. That would be dumb and this would loop. |
| */ |
| static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer) |
| { |
| union xhci_trb *next = ++(ring->dequeue); |
| |
| ring->deq_updates++; |
| /* Update the dequeue pointer further if that was a link TRB or we're at |
| * the end of an event ring segment (which doesn't have link TRBS) |
| */ |
| while (last_trb(xhci, ring, ring->deq_seg, next)) { |
| if (consumer && last_trb_on_last_seg(xhci, ring, ring->deq_seg, next)) { |
| ring->cycle_state = (ring->cycle_state ? 0 : 1); |
| if (!in_interrupt()) |
| xhci_dbg(xhci, "Toggle cycle state for ring 0x%x = %i\n", |
| (unsigned int) ring, |
| (unsigned int) ring->cycle_state); |
| } |
| ring->deq_seg = ring->deq_seg->next; |
| ring->dequeue = ring->deq_seg->trbs; |
| next = ring->dequeue; |
| } |
| } |
| |
| /* |
| * See Cycle bit rules. SW is the consumer for the event ring only. |
| * Don't make a ring full of link TRBs. That would be dumb and this would loop. |
| * |
| * If we've just enqueued a TRB that is in the middle of a TD (meaning the |
| * chain bit is set), then set the chain bit in all the following link TRBs. |
| * If we've enqueued the last TRB in a TD, make sure the following link TRBs |
| * have their chain bit cleared (so that each Link TRB is a separate TD). |
| * |
| * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit |
| * set, but other sections talk about dealing with the chain bit set. |
| * Assume section 6.4.4.1 is wrong, and the chain bit can be set in a Link TRB. |
| */ |
| static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer) |
| { |
| u32 chain; |
| union xhci_trb *next; |
| |
| chain = ring->enqueue->generic.field[3] & TRB_CHAIN; |
| next = ++(ring->enqueue); |
| |
| ring->enq_updates++; |
| /* Update the dequeue pointer further if that was a link TRB or we're at |
| * the end of an event ring segment (which doesn't have link TRBS) |
| */ |
| while (last_trb(xhci, ring, ring->enq_seg, next)) { |
| if (!consumer) { |
| if (ring != xhci->event_ring) { |
| /* Give this link TRB to the hardware */ |
| if (next->link.control & TRB_CYCLE) |
| next->link.control &= (u32) ~TRB_CYCLE; |
| else |
| next->link.control |= (u32) TRB_CYCLE; |
| next->link.control &= TRB_CHAIN; |
| next->link.control |= chain; |
| } |
| /* Toggle the cycle bit after the last ring segment. */ |
| if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { |
| ring->cycle_state = (ring->cycle_state ? 0 : 1); |
| if (!in_interrupt()) |
| xhci_dbg(xhci, "Toggle cycle state for ring 0x%x = %i\n", |
| (unsigned int) ring, |
| (unsigned int) ring->cycle_state); |
| } |
| } |
| ring->enq_seg = ring->enq_seg->next; |
| ring->enqueue = ring->enq_seg->trbs; |
| next = ring->enqueue; |
| } |
| } |
| |
| /* |
| * Check to see if there's room to enqueue num_trbs on the ring. See rules |
| * above. |
| * FIXME: this would be simpler and faster if we just kept track of the number |
| * of free TRBs in a ring. |
| */ |
| static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, |
| unsigned int num_trbs) |
| { |
| int i; |
| union xhci_trb *enq = ring->enqueue; |
| struct xhci_segment *enq_seg = ring->enq_seg; |
| |
| /* Check if ring is empty */ |
| if (enq == ring->dequeue) |
| return 1; |
| /* Make sure there's an extra empty TRB available */ |
| for (i = 0; i <= num_trbs; ++i) { |
| if (enq == ring->dequeue) |
| return 0; |
| enq++; |
| while (last_trb(xhci, ring, enq_seg, enq)) { |
| enq_seg = enq_seg->next; |
| enq = enq_seg->trbs; |
| } |
| } |
| return 1; |
| } |
| |
| void set_hc_event_deq(struct xhci_hcd *xhci) |
| { |
| u32 temp; |
| dma_addr_t deq; |
| |
| deq = trb_virt_to_dma(xhci->event_ring->deq_seg, |
| xhci->event_ring->dequeue); |
| if (deq == 0 && !in_interrupt()) |
| xhci_warn(xhci, "WARN something wrong with SW event ring " |
| "dequeue ptr.\n"); |
| /* Update HC event ring dequeue pointer */ |
| temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]); |
| temp &= ERST_PTR_MASK; |
| if (!in_interrupt()) |
| xhci_dbg(xhci, "// Write event ring dequeue pointer\n"); |
| xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]); |
| xhci_writel(xhci, (deq & ~ERST_PTR_MASK) | temp, |
| &xhci->ir_set->erst_dequeue[0]); |
| } |
| |
| /* Ring the host controller doorbell after placing a command on the ring */ |
| void ring_cmd_db(struct xhci_hcd *xhci) |
| { |
| u32 temp; |
| |
| xhci_dbg(xhci, "// Ding dong!\n"); |
| temp = xhci_readl(xhci, &xhci->dba->doorbell[0]) & DB_MASK; |
| xhci_writel(xhci, temp | DB_TARGET_HOST, &xhci->dba->doorbell[0]); |
| /* Flush PCI posted writes */ |
| xhci_readl(xhci, &xhci->dba->doorbell[0]); |
| } |
| |
| static void handle_cmd_completion(struct xhci_hcd *xhci, |
| struct xhci_event_cmd *event) |
| { |
| int slot_id = TRB_TO_SLOT_ID(event->flags); |
| u64 cmd_dma; |
| dma_addr_t cmd_dequeue_dma; |
| |
| cmd_dma = (((u64) event->cmd_trb[1]) << 32) + event->cmd_trb[0]; |
| cmd_dequeue_dma = trb_virt_to_dma(xhci->cmd_ring->deq_seg, |
| xhci->cmd_ring->dequeue); |
| /* Is the command ring deq ptr out of sync with the deq seg ptr? */ |
| if (cmd_dequeue_dma == 0) { |
| xhci->error_bitmask |= 1 << 4; |
| return; |
| } |
| /* Does the DMA address match our internal dequeue pointer address? */ |
| if (cmd_dma != (u64) cmd_dequeue_dma) { |
| xhci->error_bitmask |= 1 << 5; |
| return; |
| } |
| switch (xhci->cmd_ring->dequeue->generic.field[3] & TRB_TYPE_BITMASK) { |
| case TRB_TYPE(TRB_ENABLE_SLOT): |
| if (GET_COMP_CODE(event->status) == COMP_SUCCESS) |
| xhci->slot_id = slot_id; |
| else |
| xhci->slot_id = 0; |
| complete(&xhci->addr_dev); |
| break; |
| case TRB_TYPE(TRB_DISABLE_SLOT): |
| if (xhci->devs[slot_id]) |
| xhci_free_virt_device(xhci, slot_id); |
| break; |
| case TRB_TYPE(TRB_ADDR_DEV): |
| xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status); |
| complete(&xhci->addr_dev); |
| break; |
| case TRB_TYPE(TRB_CMD_NOOP): |
| ++xhci->noops_handled; |
| break; |
| default: |
| /* Skip over unknown commands on the event ring */ |
| xhci->error_bitmask |= 1 << 6; |
| break; |
| } |
| inc_deq(xhci, xhci->cmd_ring, false); |
| } |
| |
| static void handle_port_status(struct xhci_hcd *xhci, |
| union xhci_trb *event) |
| { |
| u32 port_id; |
| |
| /* Port status change events always have a successful completion code */ |
| if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) { |
| xhci_warn(xhci, "WARN: xHC returned failed port status event\n"); |
| xhci->error_bitmask |= 1 << 8; |
| } |
| /* FIXME: core doesn't care about all port link state changes yet */ |
| port_id = GET_PORT_ID(event->generic.field[0]); |
| xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id); |
| |
| /* Update event ring dequeue pointer before dropping the lock */ |
| inc_deq(xhci, xhci->event_ring, true); |
| set_hc_event_deq(xhci); |
| |
| spin_unlock(&xhci->lock); |
| /* Pass this up to the core */ |
| usb_hcd_poll_rh_status(xhci_to_hcd(xhci)); |
| spin_lock(&xhci->lock); |
| } |
| |
| /* |
| * This function handles all OS-owned events on the event ring. It may drop |
| * xhci->lock between event processing (e.g. to pass up port status changes). |
| */ |
| void handle_event(struct xhci_hcd *xhci) |
| { |
| union xhci_trb *event; |
| int update_ptrs = 1; |
| |
| if (!xhci->event_ring || !xhci->event_ring->dequeue) { |
| xhci->error_bitmask |= 1 << 1; |
| return; |
| } |
| |
| event = xhci->event_ring->dequeue; |
| /* Does the HC or OS own the TRB? */ |
| if ((event->event_cmd.flags & TRB_CYCLE) != |
| xhci->event_ring->cycle_state) { |
| xhci->error_bitmask |= 1 << 2; |
| return; |
| } |
| |
| /* FIXME: Handle more event types. */ |
| switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) { |
| case TRB_TYPE(TRB_COMPLETION): |
| handle_cmd_completion(xhci, &event->event_cmd); |
| break; |
| case TRB_TYPE(TRB_PORT_STATUS): |
| handle_port_status(xhci, event); |
| update_ptrs = 0; |
| break; |
| default: |
| xhci->error_bitmask |= 1 << 3; |
| } |
| |
| if (update_ptrs) { |
| /* Update SW and HC event ring dequeue pointer */ |
| inc_deq(xhci, xhci->event_ring, true); |
| set_hc_event_deq(xhci); |
| } |
| /* Are there more items on the event ring? */ |
| handle_event(xhci); |
| } |
| |
| /* |
| * Generic function for queueing a TRB on a ring. |
| * The caller must have checked to make sure there's room on the ring. |
| */ |
| static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, |
| bool consumer, |
| u32 field1, u32 field2, u32 field3, u32 field4) |
| { |
| struct xhci_generic_trb *trb; |
| |
| trb = &ring->enqueue->generic; |
| trb->field[0] = field1; |
| trb->field[1] = field2; |
| trb->field[2] = field3; |
| trb->field[3] = field4; |
| inc_enq(xhci, ring, consumer); |
| } |
| |
| /* Generic function for queueing a command TRB on the command ring */ |
| static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 field3, u32 field4) |
| { |
| if (!room_on_ring(xhci, xhci->cmd_ring, 1)) { |
| if (!in_interrupt()) |
| xhci_err(xhci, "ERR: No room for command on command ring\n"); |
| return -ENOMEM; |
| } |
| queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, |
| field4 | xhci->cmd_ring->cycle_state); |
| return 0; |
| } |
| |
| /* Queue a no-op command on the command ring */ |
| static int queue_cmd_noop(struct xhci_hcd *xhci) |
| { |
| return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP)); |
| } |
| |
| /* |
| * Place a no-op command on the command ring to test the command and |
| * event ring. |
| */ |
| void *setup_one_noop(struct xhci_hcd *xhci) |
| { |
| if (queue_cmd_noop(xhci) < 0) |
| return NULL; |
| xhci->noops_submitted++; |
| return ring_cmd_db; |
| } |
| |
| /* Queue a slot enable or disable request on the command ring */ |
| int queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id) |
| { |
| return queue_command(xhci, 0, 0, 0, |
| TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id)); |
| } |
| |
| /* Queue an address device command TRB */ |
| int queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id) |
| { |
| return queue_command(xhci, in_ctx_ptr, 0, 0, |
| TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id)); |
| } |