| /* |
| * f_serial.c - generic USB serial function driver |
| * |
| * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com) |
| * Copyright (C) 2008 by David Brownell |
| * Copyright (C) 2008 by Nokia Corporation |
| * |
| * This software is distributed under the terms of the GNU General |
| * Public License ("GPL") as published by the Free Software Foundation, |
| * either version 2 of that License or (at your option) any later version. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| |
| #include "u_serial.h" |
| #include "gadget_chips.h" |
| |
| |
| /* |
| * This function packages a simple "generic serial" port with no real |
| * control mechanisms, just raw data transfer over two bulk endpoints. |
| * |
| * Because it's not standardized, this isn't as interoperable as the |
| * CDC ACM driver. However, for many purposes it's just as functional |
| * if you can arrange appropriate host side drivers. |
| */ |
| |
| struct f_gser { |
| struct gserial port; |
| u8 data_id; |
| u8 port_num; |
| }; |
| |
| static inline struct f_gser *func_to_gser(struct usb_function *f) |
| { |
| return container_of(f, struct f_gser, port.func); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* interface descriptor: */ |
| |
| static struct usb_interface_descriptor gser_interface_desc = { |
| .bLength = USB_DT_INTERFACE_SIZE, |
| .bDescriptorType = USB_DT_INTERFACE, |
| /* .bInterfaceNumber = DYNAMIC */ |
| .bNumEndpoints = 2, |
| .bInterfaceClass = USB_CLASS_VENDOR_SPEC, |
| .bInterfaceSubClass = 0, |
| .bInterfaceProtocol = 0, |
| /* .iInterface = DYNAMIC */ |
| }; |
| |
| /* full speed support: */ |
| |
| static struct usb_endpoint_descriptor gser_fs_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_endpoint_descriptor gser_fs_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_descriptor_header *gser_fs_function[] = { |
| (struct usb_descriptor_header *) &gser_interface_desc, |
| (struct usb_descriptor_header *) &gser_fs_in_desc, |
| (struct usb_descriptor_header *) &gser_fs_out_desc, |
| NULL, |
| }; |
| |
| /* high speed support: */ |
| |
| static struct usb_endpoint_descriptor gser_hs_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_endpoint_descriptor gser_hs_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_descriptor_header *gser_hs_function[] = { |
| (struct usb_descriptor_header *) &gser_interface_desc, |
| (struct usb_descriptor_header *) &gser_hs_in_desc, |
| (struct usb_descriptor_header *) &gser_hs_out_desc, |
| NULL, |
| }; |
| |
| static struct usb_endpoint_descriptor gser_ss_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| }; |
| |
| static struct usb_endpoint_descriptor gser_ss_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| }; |
| |
| static struct usb_ss_ep_comp_descriptor gser_ss_bulk_comp_desc = { |
| .bLength = sizeof gser_ss_bulk_comp_desc, |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| }; |
| |
| static struct usb_descriptor_header *gser_ss_function[] = { |
| (struct usb_descriptor_header *) &gser_interface_desc, |
| (struct usb_descriptor_header *) &gser_ss_in_desc, |
| (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc, |
| (struct usb_descriptor_header *) &gser_ss_out_desc, |
| (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc, |
| NULL, |
| }; |
| |
| /* string descriptors: */ |
| |
| static struct usb_string gser_string_defs[] = { |
| [0].s = "Generic Serial", |
| { } /* end of list */ |
| }; |
| |
| static struct usb_gadget_strings gser_string_table = { |
| .language = 0x0409, /* en-us */ |
| .strings = gser_string_defs, |
| }; |
| |
| static struct usb_gadget_strings *gser_strings[] = { |
| &gser_string_table, |
| NULL, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt) |
| { |
| struct f_gser *gser = func_to_gser(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| |
| /* we know alt == 0, so this is an activation or a reset */ |
| |
| if (gser->port.in->driver_data) { |
| DBG(cdev, "reset generic ttyGS%d\n", gser->port_num); |
| gserial_disconnect(&gser->port); |
| } |
| if (!gser->port.in->desc || !gser->port.out->desc) { |
| DBG(cdev, "activate generic ttyGS%d\n", gser->port_num); |
| if (config_ep_by_speed(cdev->gadget, f, gser->port.in) || |
| config_ep_by_speed(cdev->gadget, f, gser->port.out)) { |
| gser->port.in->desc = NULL; |
| gser->port.out->desc = NULL; |
| return -EINVAL; |
| } |
| } |
| gserial_connect(&gser->port, gser->port_num); |
| return 0; |
| } |
| |
| static void gser_disable(struct usb_function *f) |
| { |
| struct f_gser *gser = func_to_gser(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| |
| DBG(cdev, "generic ttyGS%d deactivated\n", gser->port_num); |
| gserial_disconnect(&gser->port); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* serial function driver setup/binding */ |
| |
| static int gser_bind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct usb_composite_dev *cdev = c->cdev; |
| struct f_gser *gser = func_to_gser(f); |
| int status; |
| struct usb_ep *ep; |
| |
| /* REVISIT might want instance-specific strings to help |
| * distinguish instances ... |
| */ |
| |
| /* maybe allocate device-global string ID */ |
| if (gser_string_defs[0].id == 0) { |
| status = usb_string_id(c->cdev); |
| if (status < 0) |
| return status; |
| gser_string_defs[0].id = status; |
| } |
| |
| /* allocate instance-specific interface IDs */ |
| status = usb_interface_id(c, f); |
| if (status < 0) |
| goto fail; |
| gser->data_id = status; |
| gser_interface_desc.bInterfaceNumber = status; |
| |
| status = -ENODEV; |
| |
| /* allocate instance-specific endpoints */ |
| ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_in_desc); |
| if (!ep) |
| goto fail; |
| gser->port.in = ep; |
| ep->driver_data = cdev; /* claim */ |
| |
| ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_out_desc); |
| if (!ep) |
| goto fail; |
| gser->port.out = ep; |
| ep->driver_data = cdev; /* claim */ |
| |
| /* support all relevant hardware speeds... we expect that when |
| * hardware is dual speed, all bulk-capable endpoints work at |
| * both speeds |
| */ |
| gser_hs_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress; |
| gser_hs_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress; |
| |
| gser_ss_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress; |
| gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress; |
| |
| status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function, |
| gser_ss_function); |
| if (status) |
| goto fail; |
| DBG(cdev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n", |
| gser->port_num, |
| gadget_is_superspeed(c->cdev->gadget) ? "super" : |
| gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", |
| gser->port.in->name, gser->port.out->name); |
| return 0; |
| |
| fail: |
| /* we might as well release our claims on endpoints */ |
| if (gser->port.out) |
| gser->port.out->driver_data = NULL; |
| if (gser->port.in) |
| gser->port.in->driver_data = NULL; |
| |
| ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); |
| |
| return status; |
| } |
| |
| #ifdef USB_FSERIAL_INCLUDED |
| |
| static void |
| gser_old_unbind(struct usb_configuration *c, struct usb_function *f) |
| { |
| usb_free_all_descriptors(f); |
| kfree(func_to_gser(f)); |
| } |
| |
| /** |
| * gser_bind_config - add a generic serial function to a configuration |
| * @c: the configuration to support the serial instance |
| * @port_num: /dev/ttyGS* port this interface will use |
| * Context: single threaded during gadget setup |
| * |
| * Returns zero on success, else negative errno. |
| */ |
| int __init gser_bind_config(struct usb_configuration *c, u8 port_num) |
| { |
| struct f_gser *gser; |
| int status; |
| |
| /* allocate and initialize one new instance */ |
| gser = kzalloc(sizeof *gser, GFP_KERNEL); |
| if (!gser) |
| return -ENOMEM; |
| |
| gser->port_num = port_num; |
| |
| gser->port.func.name = "gser"; |
| gser->port.func.strings = gser_strings; |
| gser->port.func.bind = gser_bind; |
| gser->port.func.unbind = gser_old_unbind; |
| gser->port.func.set_alt = gser_set_alt; |
| gser->port.func.disable = gser_disable; |
| |
| status = usb_add_function(c, &gser->port.func); |
| if (status) |
| kfree(gser); |
| return status; |
| } |
| |
| #else |
| |
| static void gser_free_inst(struct usb_function_instance *f) |
| { |
| struct f_serial_opts *opts; |
| |
| opts = container_of(f, struct f_serial_opts, func_inst); |
| gserial_free_line(opts->port_num); |
| kfree(opts); |
| } |
| |
| static struct usb_function_instance *gser_alloc_inst(void) |
| { |
| struct f_serial_opts *opts; |
| int ret; |
| |
| opts = kzalloc(sizeof(*opts), GFP_KERNEL); |
| if (!opts) |
| return ERR_PTR(-ENOMEM); |
| |
| opts->func_inst.free_func_inst = gser_free_inst; |
| ret = gserial_alloc_line(&opts->port_num); |
| if (ret) { |
| kfree(opts); |
| return ERR_PTR(ret); |
| } |
| |
| return &opts->func_inst; |
| } |
| |
| static void gser_free(struct usb_function *f) |
| { |
| struct f_gser *serial; |
| |
| serial = func_to_gser(f); |
| kfree(serial); |
| } |
| |
| static void gser_unbind(struct usb_configuration *c, struct usb_function *f) |
| { |
| usb_free_all_descriptors(f); |
| } |
| |
| struct usb_function *gser_alloc(struct usb_function_instance *fi) |
| { |
| struct f_gser *gser; |
| struct f_serial_opts *opts; |
| |
| /* allocate and initialize one new instance */ |
| gser = kzalloc(sizeof(*gser), GFP_KERNEL); |
| if (!gser) |
| return ERR_PTR(-ENOMEM); |
| |
| opts = container_of(fi, struct f_serial_opts, func_inst); |
| |
| gser->port_num = opts->port_num; |
| |
| gser->port.func.name = "gser"; |
| gser->port.func.strings = gser_strings; |
| gser->port.func.bind = gser_bind; |
| gser->port.func.unbind = gser_unbind; |
| gser->port.func.set_alt = gser_set_alt; |
| gser->port.func.disable = gser_disable; |
| gser->port.func.free_func = gser_free; |
| |
| return &gser->port.func; |
| } |
| |
| DECLARE_USB_FUNCTION_INIT(gser, gser_alloc_inst, gser_alloc); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Al Borchers"); |
| MODULE_AUTHOR("David Brownell"); |
| |
| #endif |