| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include "pci.h" |
| |
| #ifdef CONFIG_X86_64 |
| |
| #include <asm/pci-direct.h> |
| #include <asm/mpspec.h> |
| #include <linux/cpumask.h> |
| #include <linux/topology.h> |
| |
| /* |
| * This discovers the pcibus <-> node mapping on AMD K8. |
| * also get peer root bus resource for io,mmio |
| */ |
| |
| |
| /* |
| * sub bus (transparent) will use entres from 3 to store extra from root, |
| * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES? |
| */ |
| #define RES_NUM 16 |
| struct pci_root_info { |
| char name[12]; |
| unsigned int res_num; |
| struct resource res[RES_NUM]; |
| int bus_min; |
| int bus_max; |
| int node; |
| int link; |
| }; |
| |
| /* 4 at this time, it may become to 32 */ |
| #define PCI_ROOT_NR 4 |
| static int pci_root_num; |
| static struct pci_root_info pci_root_info[PCI_ROOT_NR]; |
| |
| #ifdef CONFIG_NUMA |
| |
| #define BUS_NR 256 |
| |
| static int mp_bus_to_node[BUS_NR]; |
| |
| void set_mp_bus_to_node(int busnum, int node) |
| { |
| if (busnum >= 0 && busnum < BUS_NR) |
| mp_bus_to_node[busnum] = node; |
| } |
| |
| int get_mp_bus_to_node(int busnum) |
| { |
| int node = -1; |
| |
| if (busnum < 0 || busnum > (BUS_NR - 1)) |
| return node; |
| |
| node = mp_bus_to_node[busnum]; |
| |
| /* |
| * let numa_node_id to decide it later in dma_alloc_pages |
| * if there is no ram on that node |
| */ |
| if (node != -1 && !node_online(node)) |
| node = -1; |
| |
| return node; |
| } |
| #endif |
| |
| void set_pci_bus_resources_arch_default(struct pci_bus *b) |
| { |
| int i; |
| int j; |
| struct pci_root_info *info; |
| |
| /* if only one root bus, don't need to anything */ |
| if (pci_root_num < 2) |
| return; |
| |
| for (i = 0; i < pci_root_num; i++) { |
| if (pci_root_info[i].bus_min == b->number) |
| break; |
| } |
| |
| if (i == pci_root_num) |
| return; |
| |
| info = &pci_root_info[i]; |
| for (j = 0; j < info->res_num; j++) { |
| struct resource *res; |
| struct resource *root; |
| |
| res = &info->res[j]; |
| b->resource[j] = res; |
| if (res->flags & IORESOURCE_IO) |
| root = &ioport_resource; |
| else |
| root = &iomem_resource; |
| insert_resource(root, res); |
| } |
| } |
| |
| #define RANGE_NUM 16 |
| |
| struct res_range { |
| size_t start; |
| size_t end; |
| }; |
| |
| static void __init update_range(struct res_range *range, size_t start, |
| size_t end) |
| { |
| int i; |
| int j; |
| |
| for (j = 0; j < RANGE_NUM; j++) { |
| if (!range[j].end) |
| continue; |
| |
| if (start <= range[j].start && end >= range[j].end) { |
| range[j].start = 0; |
| range[j].end = 0; |
| continue; |
| } |
| |
| if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { |
| range[j].start = end + 1; |
| continue; |
| } |
| |
| |
| if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { |
| range[j].end = start - 1; |
| continue; |
| } |
| |
| if (start > range[j].start && end < range[j].end) { |
| /* find the new spare */ |
| for (i = 0; i < RANGE_NUM; i++) { |
| if (range[i].end == 0) |
| break; |
| } |
| if (i < RANGE_NUM) { |
| range[i].end = range[j].end; |
| range[i].start = end + 1; |
| } else { |
| printk(KERN_ERR "run of slot in ranges\n"); |
| } |
| range[j].end = start - 1; |
| continue; |
| } |
| } |
| } |
| |
| static void __init update_res(struct pci_root_info *info, size_t start, |
| size_t end, unsigned long flags, int merge) |
| { |
| int i; |
| struct resource *res; |
| |
| if (!merge) |
| goto addit; |
| |
| /* try to merge it with old one */ |
| for (i = 0; i < info->res_num; i++) { |
| size_t final_start, final_end; |
| size_t common_start, common_end; |
| |
| res = &info->res[i]; |
| if (res->flags != flags) |
| continue; |
| |
| common_start = max((size_t)res->start, start); |
| common_end = min((size_t)res->end, end); |
| if (common_start > common_end + 1) |
| continue; |
| |
| final_start = min((size_t)res->start, start); |
| final_end = max((size_t)res->end, end); |
| |
| res->start = final_start; |
| res->end = final_end; |
| return; |
| } |
| |
| addit: |
| |
| /* need to add that */ |
| if (info->res_num >= RES_NUM) |
| return; |
| |
| res = &info->res[info->res_num]; |
| res->name = info->name; |
| res->flags = flags; |
| res->start = start; |
| res->end = end; |
| res->child = NULL; |
| info->res_num++; |
| } |
| |
| struct pci_hostbridge_probe { |
| u32 bus; |
| u32 slot; |
| u32 vendor; |
| u32 device; |
| }; |
| |
| static struct pci_hostbridge_probe pci_probes[] __initdata = { |
| { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 }, |
| { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, |
| { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, |
| { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, |
| }; |
| |
| static u64 __initdata fam10h_mmconf_start; |
| static u64 __initdata fam10h_mmconf_end; |
| static void __init get_pci_mmcfg_amd_fam10h_range(void) |
| { |
| u32 address; |
| u64 base, msr; |
| unsigned segn_busn_bits; |
| |
| /* assume all cpus from fam10h have mmconf */ |
| if (boot_cpu_data.x86 < 0x10) |
| return; |
| |
| address = MSR_FAM10H_MMIO_CONF_BASE; |
| rdmsrl(address, msr); |
| |
| /* mmconfig is not enable */ |
| if (!(msr & FAM10H_MMIO_CONF_ENABLE)) |
| return; |
| |
| base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT); |
| |
| segn_busn_bits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & |
| FAM10H_MMIO_CONF_BUSRANGE_MASK; |
| |
| fam10h_mmconf_start = base; |
| fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1; |
| } |
| |
| /** |
| * early_fill_mp_bus_to_node() |
| * called before pcibios_scan_root and pci_scan_bus |
| * fills the mp_bus_to_cpumask array based according to the LDT Bus Number |
| * Registers found in the K8 northbridge |
| */ |
| static int __init early_fill_mp_bus_info(void) |
| { |
| int i; |
| int j; |
| unsigned bus; |
| unsigned slot; |
| int found; |
| int node; |
| int link; |
| int def_node; |
| int def_link; |
| struct pci_root_info *info; |
| u32 reg; |
| struct resource *res; |
| size_t start; |
| size_t end; |
| struct res_range range[RANGE_NUM]; |
| u64 val; |
| u32 address; |
| |
| #ifdef CONFIG_NUMA |
| for (i = 0; i < BUS_NR; i++) |
| mp_bus_to_node[i] = -1; |
| #endif |
| |
| if (!early_pci_allowed()) |
| return -1; |
| |
| found = 0; |
| for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { |
| u32 id; |
| u16 device; |
| u16 vendor; |
| |
| bus = pci_probes[i].bus; |
| slot = pci_probes[i].slot; |
| id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); |
| |
| vendor = id & 0xffff; |
| device = (id>>16) & 0xffff; |
| if (pci_probes[i].vendor == vendor && |
| pci_probes[i].device == device) { |
| found = 1; |
| break; |
| } |
| } |
| |
| if (!found) |
| return 0; |
| |
| pci_root_num = 0; |
| for (i = 0; i < 4; i++) { |
| int min_bus; |
| int max_bus; |
| reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2)); |
| |
| /* Check if that register is enabled for bus range */ |
| if ((reg & 7) != 3) |
| continue; |
| |
| min_bus = (reg >> 16) & 0xff; |
| max_bus = (reg >> 24) & 0xff; |
| node = (reg >> 4) & 0x07; |
| #ifdef CONFIG_NUMA |
| for (j = min_bus; j <= max_bus; j++) |
| mp_bus_to_node[j] = (unsigned char) node; |
| #endif |
| link = (reg >> 8) & 0x03; |
| |
| info = &pci_root_info[pci_root_num]; |
| info->bus_min = min_bus; |
| info->bus_max = max_bus; |
| info->node = node; |
| info->link = link; |
| sprintf(info->name, "PCI Bus #%02x", min_bus); |
| pci_root_num++; |
| } |
| |
| /* get the default node and link for left over res */ |
| reg = read_pci_config(bus, slot, 0, 0x60); |
| def_node = (reg >> 8) & 0x07; |
| reg = read_pci_config(bus, slot, 0, 0x64); |
| def_link = (reg >> 8) & 0x03; |
| |
| memset(range, 0, sizeof(range)); |
| range[0].end = 0xffff; |
| /* io port resource */ |
| for (i = 0; i < 4; i++) { |
| reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3)); |
| if (!(reg & 3)) |
| continue; |
| |
| start = reg & 0xfff000; |
| reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3)); |
| node = reg & 0x07; |
| link = (reg >> 4) & 0x03; |
| end = (reg & 0xfff000) | 0xfff; |
| |
| /* find the position */ |
| for (j = 0; j < pci_root_num; j++) { |
| info = &pci_root_info[j]; |
| if (info->node == node && info->link == link) |
| break; |
| } |
| if (j == pci_root_num) |
| continue; /* not found */ |
| |
| info = &pci_root_info[j]; |
| printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n", |
| node, link, (u64)start, (u64)end); |
| |
| /* kernel only handle 16 bit only */ |
| if (end > 0xffff) |
| end = 0xffff; |
| update_res(info, start, end, IORESOURCE_IO, 1); |
| update_range(range, start, end); |
| } |
| /* add left over io port range to def node/link, [0, 0xffff] */ |
| /* find the position */ |
| for (j = 0; j < pci_root_num; j++) { |
| info = &pci_root_info[j]; |
| if (info->node == def_node && info->link == def_link) |
| break; |
| } |
| if (j < pci_root_num) { |
| info = &pci_root_info[j]; |
| for (i = 0; i < RANGE_NUM; i++) { |
| if (!range[i].end) |
| continue; |
| |
| update_res(info, range[i].start, range[i].end, |
| IORESOURCE_IO, 1); |
| } |
| } |
| |
| memset(range, 0, sizeof(range)); |
| /* 0xfd00000000-0xffffffffff for HT */ |
| range[0].end = (0xfdULL<<32) - 1; |
| |
| /* need to take out [0, TOM) for RAM*/ |
| address = MSR_K8_TOP_MEM1; |
| rdmsrl(address, val); |
| end = (val & 0xffffff800000ULL); |
| printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20); |
| if (end < (1ULL<<32)) |
| update_range(range, 0, end - 1); |
| |
| /* get mmconfig */ |
| get_pci_mmcfg_amd_fam10h_range(); |
| /* need to take out mmconf range */ |
| if (fam10h_mmconf_end) { |
| printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end); |
| update_range(range, fam10h_mmconf_start, fam10h_mmconf_end); |
| } |
| |
| /* mmio resource */ |
| for (i = 0; i < 8; i++) { |
| reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); |
| if (!(reg & 3)) |
| continue; |
| |
| start = reg & 0xffffff00; /* 39:16 on 31:8*/ |
| start <<= 8; |
| reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); |
| node = reg & 0x07; |
| link = (reg >> 4) & 0x03; |
| end = (reg & 0xffffff00); |
| end <<= 8; |
| end |= 0xffff; |
| |
| /* find the position */ |
| for (j = 0; j < pci_root_num; j++) { |
| info = &pci_root_info[j]; |
| if (info->node == node && info->link == link) |
| break; |
| } |
| if (j == pci_root_num) |
| continue; /* not found */ |
| |
| info = &pci_root_info[j]; |
| |
| printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]", |
| node, link, (u64)start, (u64)end); |
| /* |
| * some sick allocation would have range overlap with fam10h |
| * mmconf range, so need to update start and end. |
| */ |
| if (fam10h_mmconf_end) { |
| int changed = 0; |
| u64 endx = 0; |
| if (start >= fam10h_mmconf_start && |
| start <= fam10h_mmconf_end) { |
| start = fam10h_mmconf_end + 1; |
| changed = 1; |
| } |
| |
| if (end >= fam10h_mmconf_start && |
| end <= fam10h_mmconf_end) { |
| end = fam10h_mmconf_start - 1; |
| changed = 1; |
| } |
| |
| if (start < fam10h_mmconf_start && |
| end > fam10h_mmconf_end) { |
| /* we got a hole */ |
| endx = fam10h_mmconf_start - 1; |
| update_res(info, start, endx, IORESOURCE_MEM, 0); |
| update_range(range, start, endx); |
| printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx); |
| start = fam10h_mmconf_end + 1; |
| changed = 1; |
| } |
| if (changed) { |
| if (start <= end) { |
| printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end); |
| } else { |
| printk(KERN_CONT "%s\n", endx?"":" ==> none"); |
| continue; |
| } |
| } |
| } |
| |
| update_res(info, start, end, IORESOURCE_MEM, 1); |
| update_range(range, start, end); |
| printk(KERN_CONT "\n"); |
| } |
| |
| /* need to take out [4G, TOM2) for RAM*/ |
| /* SYS_CFG */ |
| address = MSR_K8_SYSCFG; |
| rdmsrl(address, val); |
| /* TOP_MEM2 is enabled? */ |
| if (val & (1<<21)) { |
| /* TOP_MEM2 */ |
| address = MSR_K8_TOP_MEM2; |
| rdmsrl(address, val); |
| end = (val & 0xffffff800000ULL); |
| printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20); |
| update_range(range, 1ULL<<32, end - 1); |
| } |
| |
| /* |
| * add left over mmio range to def node/link ? |
| * that is tricky, just record range in from start_min to 4G |
| */ |
| for (j = 0; j < pci_root_num; j++) { |
| info = &pci_root_info[j]; |
| if (info->node == def_node && info->link == def_link) |
| break; |
| } |
| if (j < pci_root_num) { |
| info = &pci_root_info[j]; |
| |
| for (i = 0; i < RANGE_NUM; i++) { |
| if (!range[i].end) |
| continue; |
| |
| update_res(info, range[i].start, range[i].end, |
| IORESOURCE_MEM, 1); |
| } |
| } |
| |
| for (i = 0; i < pci_root_num; i++) { |
| int res_num; |
| int busnum; |
| |
| info = &pci_root_info[i]; |
| res_num = info->res_num; |
| busnum = info->bus_min; |
| printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n", |
| info->bus_min, info->bus_max, info->node, info->link); |
| for (j = 0; j < res_num; j++) { |
| res = &info->res[j]; |
| printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n", |
| busnum, j, |
| (res->flags & IORESOURCE_IO)?"io port":"mmio", |
| res->start, res->end); |
| } |
| } |
| |
| return 0; |
| } |
| |
| postcore_initcall(early_fill_mp_bus_info); |
| |
| #endif |
| |
| /* common 32/64 bit code */ |
| |
| #define ENABLE_CF8_EXT_CFG (1ULL << 46) |
| |
| static void enable_pci_io_ecs_per_cpu(void *unused) |
| { |
| u64 reg; |
| rdmsrl(MSR_AMD64_NB_CFG, reg); |
| if (!(reg & ENABLE_CF8_EXT_CFG)) { |
| reg |= ENABLE_CF8_EXT_CFG; |
| wrmsrl(MSR_AMD64_NB_CFG, reg); |
| } |
| } |
| |
| static int __init enable_pci_io_ecs(void) |
| { |
| /* assume all cpus from fam10h have IO ECS */ |
| if (boot_cpu_data.x86 < 0x10) |
| return 0; |
| on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1, 1); |
| pci_probe |= PCI_HAS_IO_ECS; |
| return 0; |
| } |
| |
| postcore_initcall(enable_pci_io_ecs); |