| /* |
| * linux/drivers/usb/gadget/s3c2410_udc.c |
| * |
| * Samsung S3C24xx series on-chip full speed USB device controllers |
| * |
| * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard |
| * Additional cleanups by Ben Dooks <ben-linux@fluff.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #define pr_fmt(fmt) "s3c2410_udc: " fmt |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/ioport.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/timer.h> |
| #include <linux/list.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/gpio.h> |
| #include <linux/prefetch.h> |
| #include <linux/io.h> |
| |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| |
| #include <linux/usb.h> |
| #include <linux/usb/gadget.h> |
| |
| #include <asm/byteorder.h> |
| #include <asm/irq.h> |
| #include <asm/unaligned.h> |
| #include <mach/irqs.h> |
| |
| #include <mach/hardware.h> |
| |
| #include <plat/regs-udc.h> |
| #include <linux/platform_data/usb-s3c2410_udc.h> |
| |
| |
| #include "s3c2410_udc.h" |
| |
| #define DRIVER_DESC "S3C2410 USB Device Controller Gadget" |
| #define DRIVER_VERSION "29 Apr 2007" |
| #define DRIVER_AUTHOR "Herbert Pötzl <herbert@13thfloor.at>, " \ |
| "Arnaud Patard <arnaud.patard@rtp-net.org>" |
| |
| static const char gadget_name[] = "s3c2410_udc"; |
| static const char driver_desc[] = DRIVER_DESC; |
| |
| static struct s3c2410_udc *the_controller; |
| static struct clk *udc_clock; |
| static struct clk *usb_bus_clock; |
| static void __iomem *base_addr; |
| static u64 rsrc_start; |
| static u64 rsrc_len; |
| static struct dentry *s3c2410_udc_debugfs_root; |
| |
| static inline u32 udc_read(u32 reg) |
| { |
| return readb(base_addr + reg); |
| } |
| |
| static inline void udc_write(u32 value, u32 reg) |
| { |
| writeb(value, base_addr + reg); |
| } |
| |
| static inline void udc_writeb(void __iomem *base, u32 value, u32 reg) |
| { |
| writeb(value, base + reg); |
| } |
| |
| static struct s3c2410_udc_mach_info *udc_info; |
| |
| /*************************** DEBUG FUNCTION ***************************/ |
| #define DEBUG_NORMAL 1 |
| #define DEBUG_VERBOSE 2 |
| |
| #ifdef CONFIG_USB_S3C2410_DEBUG |
| #define USB_S3C2410_DEBUG_LEVEL 0 |
| |
| static uint32_t s3c2410_ticks = 0; |
| |
| static int dprintk(int level, const char *fmt, ...) |
| { |
| static char printk_buf[1024]; |
| static long prevticks; |
| static int invocation; |
| va_list args; |
| int len; |
| |
| if (level > USB_S3C2410_DEBUG_LEVEL) |
| return 0; |
| |
| if (s3c2410_ticks != prevticks) { |
| prevticks = s3c2410_ticks; |
| invocation = 0; |
| } |
| |
| len = scnprintf(printk_buf, |
| sizeof(printk_buf), "%1lu.%02d USB: ", |
| prevticks, invocation++); |
| |
| va_start(args, fmt); |
| len = vscnprintf(printk_buf+len, |
| sizeof(printk_buf)-len, fmt, args); |
| va_end(args); |
| |
| return pr_debug("%s", printk_buf); |
| } |
| #else |
| static int dprintk(int level, const char *fmt, ...) |
| { |
| return 0; |
| } |
| #endif |
| static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) |
| { |
| u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg; |
| u32 ep_int_en_reg, usb_int_en_reg, ep0_csr; |
| u32 ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2; |
| u32 ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2; |
| |
| addr_reg = udc_read(S3C2410_UDC_FUNC_ADDR_REG); |
| pwr_reg = udc_read(S3C2410_UDC_PWR_REG); |
| ep_int_reg = udc_read(S3C2410_UDC_EP_INT_REG); |
| usb_int_reg = udc_read(S3C2410_UDC_USB_INT_REG); |
| ep_int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); |
| usb_int_en_reg = udc_read(S3C2410_UDC_USB_INT_EN_REG); |
| udc_write(0, S3C2410_UDC_INDEX_REG); |
| ep0_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| udc_write(1, S3C2410_UDC_INDEX_REG); |
| ep1_i_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| ep1_i_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); |
| ep1_o_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| ep1_o_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); |
| udc_write(2, S3C2410_UDC_INDEX_REG); |
| ep2_i_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| ep2_i_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); |
| ep2_o_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| ep2_o_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); |
| |
| seq_printf(m, "FUNC_ADDR_REG : 0x%04X\n" |
| "PWR_REG : 0x%04X\n" |
| "EP_INT_REG : 0x%04X\n" |
| "USB_INT_REG : 0x%04X\n" |
| "EP_INT_EN_REG : 0x%04X\n" |
| "USB_INT_EN_REG : 0x%04X\n" |
| "EP0_CSR : 0x%04X\n" |
| "EP1_I_CSR1 : 0x%04X\n" |
| "EP1_I_CSR2 : 0x%04X\n" |
| "EP1_O_CSR1 : 0x%04X\n" |
| "EP1_O_CSR2 : 0x%04X\n" |
| "EP2_I_CSR1 : 0x%04X\n" |
| "EP2_I_CSR2 : 0x%04X\n" |
| "EP2_O_CSR1 : 0x%04X\n" |
| "EP2_O_CSR2 : 0x%04X\n", |
| addr_reg, pwr_reg, ep_int_reg, usb_int_reg, |
| ep_int_en_reg, usb_int_en_reg, ep0_csr, |
| ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2, |
| ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2 |
| ); |
| |
| return 0; |
| } |
| |
| static int s3c2410_udc_debugfs_fops_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, s3c2410_udc_debugfs_seq_show, NULL); |
| } |
| |
| static const struct file_operations s3c2410_udc_debugfs_fops = { |
| .open = s3c2410_udc_debugfs_fops_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| /* io macros */ |
| |
| static inline void s3c2410_udc_clear_ep0_opr(void __iomem *base) |
| { |
| udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| udc_writeb(base, S3C2410_UDC_EP0_CSR_SOPKTRDY, |
| S3C2410_UDC_EP0_CSR_REG); |
| } |
| |
| static inline void s3c2410_udc_clear_ep0_sst(void __iomem *base) |
| { |
| udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| writeb(0x00, base + S3C2410_UDC_EP0_CSR_REG); |
| } |
| |
| static inline void s3c2410_udc_clear_ep0_se(void __iomem *base) |
| { |
| udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| udc_writeb(base, S3C2410_UDC_EP0_CSR_SSE, S3C2410_UDC_EP0_CSR_REG); |
| } |
| |
| static inline void s3c2410_udc_set_ep0_ipr(void __iomem *base) |
| { |
| udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| udc_writeb(base, S3C2410_UDC_EP0_CSR_IPKRDY, S3C2410_UDC_EP0_CSR_REG); |
| } |
| |
| static inline void s3c2410_udc_set_ep0_de(void __iomem *base) |
| { |
| udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| udc_writeb(base, S3C2410_UDC_EP0_CSR_DE, S3C2410_UDC_EP0_CSR_REG); |
| } |
| |
| inline void s3c2410_udc_set_ep0_ss(void __iomem *b) |
| { |
| udc_writeb(b, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| udc_writeb(b, S3C2410_UDC_EP0_CSR_SENDSTL, S3C2410_UDC_EP0_CSR_REG); |
| } |
| |
| static inline void s3c2410_udc_set_ep0_de_out(void __iomem *base) |
| { |
| udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| |
| udc_writeb(base, (S3C2410_UDC_EP0_CSR_SOPKTRDY |
| | S3C2410_UDC_EP0_CSR_DE), |
| S3C2410_UDC_EP0_CSR_REG); |
| } |
| |
| static inline void s3c2410_udc_set_ep0_sse_out(void __iomem *base) |
| { |
| udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| udc_writeb(base, (S3C2410_UDC_EP0_CSR_SOPKTRDY |
| | S3C2410_UDC_EP0_CSR_SSE), |
| S3C2410_UDC_EP0_CSR_REG); |
| } |
| |
| static inline void s3c2410_udc_set_ep0_de_in(void __iomem *base) |
| { |
| udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| udc_writeb(base, (S3C2410_UDC_EP0_CSR_IPKRDY |
| | S3C2410_UDC_EP0_CSR_DE), |
| S3C2410_UDC_EP0_CSR_REG); |
| } |
| |
| /*------------------------- I/O ----------------------------------*/ |
| |
| /* |
| * s3c2410_udc_done |
| */ |
| static void s3c2410_udc_done(struct s3c2410_ep *ep, |
| struct s3c2410_request *req, int status) |
| { |
| unsigned halted = ep->halted; |
| |
| list_del_init(&req->queue); |
| |
| if (likely(req->req.status == -EINPROGRESS)) |
| req->req.status = status; |
| else |
| status = req->req.status; |
| |
| ep->halted = 1; |
| req->req.complete(&ep->ep, &req->req); |
| ep->halted = halted; |
| } |
| |
| static void s3c2410_udc_nuke(struct s3c2410_udc *udc, |
| struct s3c2410_ep *ep, int status) |
| { |
| /* Sanity check */ |
| if (&ep->queue == NULL) |
| return; |
| |
| while (!list_empty(&ep->queue)) { |
| struct s3c2410_request *req; |
| req = list_entry(ep->queue.next, struct s3c2410_request, |
| queue); |
| s3c2410_udc_done(ep, req, status); |
| } |
| } |
| |
| static inline void s3c2410_udc_clear_ep_state(struct s3c2410_udc *dev) |
| { |
| unsigned i; |
| |
| /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint |
| * fifos, and pending transactions mustn't be continued in any case. |
| */ |
| |
| for (i = 1; i < S3C2410_ENDPOINTS; i++) |
| s3c2410_udc_nuke(dev, &dev->ep[i], -ECONNABORTED); |
| } |
| |
| static inline int s3c2410_udc_fifo_count_out(void) |
| { |
| int tmp; |
| |
| tmp = udc_read(S3C2410_UDC_OUT_FIFO_CNT2_REG) << 8; |
| tmp |= udc_read(S3C2410_UDC_OUT_FIFO_CNT1_REG); |
| return tmp; |
| } |
| |
| /* |
| * s3c2410_udc_write_packet |
| */ |
| static inline int s3c2410_udc_write_packet(int fifo, |
| struct s3c2410_request *req, |
| unsigned max) |
| { |
| unsigned len = min(req->req.length - req->req.actual, max); |
| u8 *buf = req->req.buf + req->req.actual; |
| |
| prefetch(buf); |
| |
| dprintk(DEBUG_VERBOSE, "%s %d %d %d %d\n", __func__, |
| req->req.actual, req->req.length, len, req->req.actual + len); |
| |
| req->req.actual += len; |
| |
| udelay(5); |
| writesb(base_addr + fifo, buf, len); |
| return len; |
| } |
| |
| /* |
| * s3c2410_udc_write_fifo |
| * |
| * return: 0 = still running, 1 = completed, negative = errno |
| */ |
| static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep, |
| struct s3c2410_request *req) |
| { |
| unsigned count; |
| int is_last; |
| u32 idx; |
| int fifo_reg; |
| u32 ep_csr; |
| |
| idx = ep->bEndpointAddress & 0x7F; |
| switch (idx) { |
| default: |
| idx = 0; |
| case 0: |
| fifo_reg = S3C2410_UDC_EP0_FIFO_REG; |
| break; |
| case 1: |
| fifo_reg = S3C2410_UDC_EP1_FIFO_REG; |
| break; |
| case 2: |
| fifo_reg = S3C2410_UDC_EP2_FIFO_REG; |
| break; |
| case 3: |
| fifo_reg = S3C2410_UDC_EP3_FIFO_REG; |
| break; |
| case 4: |
| fifo_reg = S3C2410_UDC_EP4_FIFO_REG; |
| break; |
| } |
| |
| count = s3c2410_udc_write_packet(fifo_reg, req, ep->ep.maxpacket); |
| |
| /* last packet is often short (sometimes a zlp) */ |
| if (count != ep->ep.maxpacket) |
| is_last = 1; |
| else if (req->req.length != req->req.actual || req->req.zero) |
| is_last = 0; |
| else |
| is_last = 2; |
| |
| /* Only ep0 debug messages are interesting */ |
| if (idx == 0) |
| dprintk(DEBUG_NORMAL, |
| "Written ep%d %d.%d of %d b [last %d,z %d]\n", |
| idx, count, req->req.actual, req->req.length, |
| is_last, req->req.zero); |
| |
| if (is_last) { |
| /* The order is important. It prevents sending 2 packets |
| * at the same time */ |
| |
| if (idx == 0) { |
| /* Reset signal => no need to say 'data sent' */ |
| if (!(udc_read(S3C2410_UDC_USB_INT_REG) |
| & S3C2410_UDC_USBINT_RESET)) |
| s3c2410_udc_set_ep0_de_in(base_addr); |
| ep->dev->ep0state = EP0_IDLE; |
| } else { |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY, |
| S3C2410_UDC_IN_CSR1_REG); |
| } |
| |
| s3c2410_udc_done(ep, req, 0); |
| is_last = 1; |
| } else { |
| if (idx == 0) { |
| /* Reset signal => no need to say 'data sent' */ |
| if (!(udc_read(S3C2410_UDC_USB_INT_REG) |
| & S3C2410_UDC_USBINT_RESET)) |
| s3c2410_udc_set_ep0_ipr(base_addr); |
| } else { |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY, |
| S3C2410_UDC_IN_CSR1_REG); |
| } |
| } |
| |
| return is_last; |
| } |
| |
| static inline int s3c2410_udc_read_packet(int fifo, u8 *buf, |
| struct s3c2410_request *req, unsigned avail) |
| { |
| unsigned len; |
| |
| len = min(req->req.length - req->req.actual, avail); |
| req->req.actual += len; |
| |
| readsb(fifo + base_addr, buf, len); |
| return len; |
| } |
| |
| /* |
| * return: 0 = still running, 1 = queue empty, negative = errno |
| */ |
| static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep, |
| struct s3c2410_request *req) |
| { |
| u8 *buf; |
| u32 ep_csr; |
| unsigned bufferspace; |
| int is_last = 1; |
| unsigned avail; |
| int fifo_count = 0; |
| u32 idx; |
| int fifo_reg; |
| |
| idx = ep->bEndpointAddress & 0x7F; |
| |
| switch (idx) { |
| default: |
| idx = 0; |
| case 0: |
| fifo_reg = S3C2410_UDC_EP0_FIFO_REG; |
| break; |
| case 1: |
| fifo_reg = S3C2410_UDC_EP1_FIFO_REG; |
| break; |
| case 2: |
| fifo_reg = S3C2410_UDC_EP2_FIFO_REG; |
| break; |
| case 3: |
| fifo_reg = S3C2410_UDC_EP3_FIFO_REG; |
| break; |
| case 4: |
| fifo_reg = S3C2410_UDC_EP4_FIFO_REG; |
| break; |
| } |
| |
| if (!req->req.length) |
| return 1; |
| |
| buf = req->req.buf + req->req.actual; |
| bufferspace = req->req.length - req->req.actual; |
| if (!bufferspace) { |
| dprintk(DEBUG_NORMAL, "%s: buffer full!\n", __func__); |
| return -1; |
| } |
| |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| |
| fifo_count = s3c2410_udc_fifo_count_out(); |
| dprintk(DEBUG_NORMAL, "%s fifo count : %d\n", __func__, fifo_count); |
| |
| if (fifo_count > ep->ep.maxpacket) |
| avail = ep->ep.maxpacket; |
| else |
| avail = fifo_count; |
| |
| fifo_count = s3c2410_udc_read_packet(fifo_reg, buf, req, avail); |
| |
| /* checking this with ep0 is not accurate as we already |
| * read a control request |
| **/ |
| if (idx != 0 && fifo_count < ep->ep.maxpacket) { |
| is_last = 1; |
| /* overflowed this request? flush extra data */ |
| if (fifo_count != avail) |
| req->req.status = -EOVERFLOW; |
| } else { |
| is_last = (req->req.length <= req->req.actual) ? 1 : 0; |
| } |
| |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| fifo_count = s3c2410_udc_fifo_count_out(); |
| |
| /* Only ep0 debug messages are interesting */ |
| if (idx == 0) |
| dprintk(DEBUG_VERBOSE, "%s fifo count : %d [last %d]\n", |
| __func__, fifo_count, is_last); |
| |
| if (is_last) { |
| if (idx == 0) { |
| s3c2410_udc_set_ep0_de_out(base_addr); |
| ep->dev->ep0state = EP0_IDLE; |
| } else { |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG); |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY, |
| S3C2410_UDC_OUT_CSR1_REG); |
| } |
| |
| s3c2410_udc_done(ep, req, 0); |
| } else { |
| if (idx == 0) { |
| s3c2410_udc_clear_ep0_opr(base_addr); |
| } else { |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG); |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY, |
| S3C2410_UDC_OUT_CSR1_REG); |
| } |
| } |
| |
| return is_last; |
| } |
| |
| static int s3c2410_udc_read_fifo_crq(struct usb_ctrlrequest *crq) |
| { |
| unsigned char *outbuf = (unsigned char *)crq; |
| int bytes_read = 0; |
| |
| udc_write(0, S3C2410_UDC_INDEX_REG); |
| |
| bytes_read = s3c2410_udc_fifo_count_out(); |
| |
| dprintk(DEBUG_NORMAL, "%s: fifo_count=%d\n", __func__, bytes_read); |
| |
| if (bytes_read > sizeof(struct usb_ctrlrequest)) |
| bytes_read = sizeof(struct usb_ctrlrequest); |
| |
| readsb(S3C2410_UDC_EP0_FIFO_REG + base_addr, outbuf, bytes_read); |
| |
| dprintk(DEBUG_VERBOSE, "%s: len=%d %02x:%02x {%x,%x,%x}\n", __func__, |
| bytes_read, crq->bRequest, crq->bRequestType, |
| crq->wValue, crq->wIndex, crq->wLength); |
| |
| return bytes_read; |
| } |
| |
| static int s3c2410_udc_get_status(struct s3c2410_udc *dev, |
| struct usb_ctrlrequest *crq) |
| { |
| u16 status = 0; |
| u8 ep_num = crq->wIndex & 0x7F; |
| u8 is_in = crq->wIndex & USB_DIR_IN; |
| |
| switch (crq->bRequestType & USB_RECIP_MASK) { |
| case USB_RECIP_INTERFACE: |
| break; |
| |
| case USB_RECIP_DEVICE: |
| status = dev->devstatus; |
| break; |
| |
| case USB_RECIP_ENDPOINT: |
| if (ep_num > 4 || crq->wLength > 2) |
| return 1; |
| |
| if (ep_num == 0) { |
| udc_write(0, S3C2410_UDC_INDEX_REG); |
| status = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| status = status & S3C2410_UDC_EP0_CSR_SENDSTL; |
| } else { |
| udc_write(ep_num, S3C2410_UDC_INDEX_REG); |
| if (is_in) { |
| status = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| status = status & S3C2410_UDC_ICSR1_SENDSTL; |
| } else { |
| status = udc_read(S3C2410_UDC_OUT_CSR1_REG); |
| status = status & S3C2410_UDC_OCSR1_SENDSTL; |
| } |
| } |
| |
| status = status ? 1 : 0; |
| break; |
| |
| default: |
| return 1; |
| } |
| |
| /* Seems to be needed to get it working. ouch :( */ |
| udelay(5); |
| udc_write(status & 0xFF, S3C2410_UDC_EP0_FIFO_REG); |
| udc_write(status >> 8, S3C2410_UDC_EP0_FIFO_REG); |
| s3c2410_udc_set_ep0_de_in(base_addr); |
| |
| return 0; |
| } |
| /*------------------------- usb state machine -------------------------------*/ |
| static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value); |
| |
| static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, |
| struct s3c2410_ep *ep, |
| struct usb_ctrlrequest *crq, |
| u32 ep0csr) |
| { |
| int len, ret, tmp; |
| |
| /* start control request? */ |
| if (!(ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY)) |
| return; |
| |
| s3c2410_udc_nuke(dev, ep, -EPROTO); |
| |
| len = s3c2410_udc_read_fifo_crq(crq); |
| if (len != sizeof(*crq)) { |
| dprintk(DEBUG_NORMAL, "setup begin: fifo READ ERROR" |
| " wanted %d bytes got %d. Stalling out...\n", |
| sizeof(*crq), len); |
| s3c2410_udc_set_ep0_ss(base_addr); |
| return; |
| } |
| |
| dprintk(DEBUG_NORMAL, "bRequest = %d bRequestType %d wLength = %d\n", |
| crq->bRequest, crq->bRequestType, crq->wLength); |
| |
| /* cope with automagic for some standard requests. */ |
| dev->req_std = (crq->bRequestType & USB_TYPE_MASK) |
| == USB_TYPE_STANDARD; |
| dev->req_config = 0; |
| dev->req_pending = 1; |
| |
| switch (crq->bRequest) { |
| case USB_REQ_SET_CONFIGURATION: |
| dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ...\n"); |
| |
| if (crq->bRequestType == USB_RECIP_DEVICE) { |
| dev->req_config = 1; |
| s3c2410_udc_set_ep0_de_out(base_addr); |
| } |
| break; |
| |
| case USB_REQ_SET_INTERFACE: |
| dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ...\n"); |
| |
| if (crq->bRequestType == USB_RECIP_INTERFACE) { |
| dev->req_config = 1; |
| s3c2410_udc_set_ep0_de_out(base_addr); |
| } |
| break; |
| |
| case USB_REQ_SET_ADDRESS: |
| dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ...\n"); |
| |
| if (crq->bRequestType == USB_RECIP_DEVICE) { |
| tmp = crq->wValue & 0x7F; |
| dev->address = tmp; |
| udc_write((tmp | S3C2410_UDC_FUNCADDR_UPDATE), |
| S3C2410_UDC_FUNC_ADDR_REG); |
| s3c2410_udc_set_ep0_de_out(base_addr); |
| return; |
| } |
| break; |
| |
| case USB_REQ_GET_STATUS: |
| dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ...\n"); |
| s3c2410_udc_clear_ep0_opr(base_addr); |
| |
| if (dev->req_std) { |
| if (!s3c2410_udc_get_status(dev, crq)) |
| return; |
| } |
| break; |
| |
| case USB_REQ_CLEAR_FEATURE: |
| s3c2410_udc_clear_ep0_opr(base_addr); |
| |
| if (crq->bRequestType != USB_RECIP_ENDPOINT) |
| break; |
| |
| if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0) |
| break; |
| |
| s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 0); |
| s3c2410_udc_set_ep0_de_out(base_addr); |
| return; |
| |
| case USB_REQ_SET_FEATURE: |
| s3c2410_udc_clear_ep0_opr(base_addr); |
| |
| if (crq->bRequestType != USB_RECIP_ENDPOINT) |
| break; |
| |
| if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0) |
| break; |
| |
| s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 1); |
| s3c2410_udc_set_ep0_de_out(base_addr); |
| return; |
| |
| default: |
| s3c2410_udc_clear_ep0_opr(base_addr); |
| break; |
| } |
| |
| if (crq->bRequestType & USB_DIR_IN) |
| dev->ep0state = EP0_IN_DATA_PHASE; |
| else |
| dev->ep0state = EP0_OUT_DATA_PHASE; |
| |
| if (!dev->driver) |
| return; |
| |
| /* deliver the request to the gadget driver */ |
| ret = dev->driver->setup(&dev->gadget, crq); |
| if (ret < 0) { |
| if (dev->req_config) { |
| dprintk(DEBUG_NORMAL, "config change %02x fail %d?\n", |
| crq->bRequest, ret); |
| return; |
| } |
| |
| if (ret == -EOPNOTSUPP) |
| dprintk(DEBUG_NORMAL, "Operation not supported\n"); |
| else |
| dprintk(DEBUG_NORMAL, |
| "dev->driver->setup failed. (%d)\n", ret); |
| |
| udelay(5); |
| s3c2410_udc_set_ep0_ss(base_addr); |
| s3c2410_udc_set_ep0_de_out(base_addr); |
| dev->ep0state = EP0_IDLE; |
| /* deferred i/o == no response yet */ |
| } else if (dev->req_pending) { |
| dprintk(DEBUG_VERBOSE, "dev->req_pending... what now?\n"); |
| dev->req_pending = 0; |
| } |
| |
| dprintk(DEBUG_VERBOSE, "ep0state %s\n", ep0states[dev->ep0state]); |
| } |
| |
| static void s3c2410_udc_handle_ep0(struct s3c2410_udc *dev) |
| { |
| u32 ep0csr; |
| struct s3c2410_ep *ep = &dev->ep[0]; |
| struct s3c2410_request *req; |
| struct usb_ctrlrequest crq; |
| |
| if (list_empty(&ep->queue)) |
| req = NULL; |
| else |
| req = list_entry(ep->queue.next, struct s3c2410_request, queue); |
| |
| /* We make the assumption that S3C2410_UDC_IN_CSR1_REG equal to |
| * S3C2410_UDC_EP0_CSR_REG when index is zero */ |
| |
| udc_write(0, S3C2410_UDC_INDEX_REG); |
| ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| |
| dprintk(DEBUG_NORMAL, "ep0csr %x ep0state %s\n", |
| ep0csr, ep0states[dev->ep0state]); |
| |
| /* clear stall status */ |
| if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) { |
| s3c2410_udc_nuke(dev, ep, -EPIPE); |
| dprintk(DEBUG_NORMAL, "... clear SENT_STALL ...\n"); |
| s3c2410_udc_clear_ep0_sst(base_addr); |
| dev->ep0state = EP0_IDLE; |
| return; |
| } |
| |
| /* clear setup end */ |
| if (ep0csr & S3C2410_UDC_EP0_CSR_SE) { |
| dprintk(DEBUG_NORMAL, "... serviced SETUP_END ...\n"); |
| s3c2410_udc_nuke(dev, ep, 0); |
| s3c2410_udc_clear_ep0_se(base_addr); |
| dev->ep0state = EP0_IDLE; |
| } |
| |
| switch (dev->ep0state) { |
| case EP0_IDLE: |
| s3c2410_udc_handle_ep0_idle(dev, ep, &crq, ep0csr); |
| break; |
| |
| case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ |
| dprintk(DEBUG_NORMAL, "EP0_IN_DATA_PHASE ... what now?\n"); |
| if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req) |
| s3c2410_udc_write_fifo(ep, req); |
| break; |
| |
| case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ |
| dprintk(DEBUG_NORMAL, "EP0_OUT_DATA_PHASE ... what now?\n"); |
| if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req) |
| s3c2410_udc_read_fifo(ep, req); |
| break; |
| |
| case EP0_END_XFER: |
| dprintk(DEBUG_NORMAL, "EP0_END_XFER ... what now?\n"); |
| dev->ep0state = EP0_IDLE; |
| break; |
| |
| case EP0_STALL: |
| dprintk(DEBUG_NORMAL, "EP0_STALL ... what now?\n"); |
| dev->ep0state = EP0_IDLE; |
| break; |
| } |
| } |
| |
| /* |
| * handle_ep - Manage I/O endpoints |
| */ |
| |
| static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) |
| { |
| struct s3c2410_request *req; |
| int is_in = ep->bEndpointAddress & USB_DIR_IN; |
| u32 ep_csr1; |
| u32 idx; |
| |
| if (likely(!list_empty(&ep->queue))) |
| req = list_entry(ep->queue.next, |
| struct s3c2410_request, queue); |
| else |
| req = NULL; |
| |
| idx = ep->bEndpointAddress & 0x7F; |
| |
| if (is_in) { |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| ep_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| dprintk(DEBUG_VERBOSE, "ep%01d write csr:%02x %d\n", |
| idx, ep_csr1, req ? 1 : 0); |
| |
| if (ep_csr1 & S3C2410_UDC_ICSR1_SENTSTL) { |
| dprintk(DEBUG_VERBOSE, "st\n"); |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| udc_write(ep_csr1 & ~S3C2410_UDC_ICSR1_SENTSTL, |
| S3C2410_UDC_IN_CSR1_REG); |
| return; |
| } |
| |
| if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req) |
| s3c2410_udc_write_fifo(ep, req); |
| } else { |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| ep_csr1 = udc_read(S3C2410_UDC_OUT_CSR1_REG); |
| dprintk(DEBUG_VERBOSE, "ep%01d rd csr:%02x\n", idx, ep_csr1); |
| |
| if (ep_csr1 & S3C2410_UDC_OCSR1_SENTSTL) { |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| udc_write(ep_csr1 & ~S3C2410_UDC_OCSR1_SENTSTL, |
| S3C2410_UDC_OUT_CSR1_REG); |
| return; |
| } |
| |
| if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) |
| s3c2410_udc_read_fifo(ep, req); |
| } |
| } |
| |
| #include <mach/regs-irq.h> |
| |
| /* |
| * s3c2410_udc_irq - interrupt handler |
| */ |
| static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev) |
| { |
| struct s3c2410_udc *dev = _dev; |
| int usb_status; |
| int usbd_status; |
| int pwr_reg; |
| int ep0csr; |
| int i; |
| u32 idx, idx2; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| /* Driver connected ? */ |
| if (!dev->driver) { |
| /* Clear interrupts */ |
| udc_write(udc_read(S3C2410_UDC_USB_INT_REG), |
| S3C2410_UDC_USB_INT_REG); |
| udc_write(udc_read(S3C2410_UDC_EP_INT_REG), |
| S3C2410_UDC_EP_INT_REG); |
| } |
| |
| /* Save index */ |
| idx = udc_read(S3C2410_UDC_INDEX_REG); |
| |
| /* Read status registers */ |
| usb_status = udc_read(S3C2410_UDC_USB_INT_REG); |
| usbd_status = udc_read(S3C2410_UDC_EP_INT_REG); |
| pwr_reg = udc_read(S3C2410_UDC_PWR_REG); |
| |
| udc_writeb(base_addr, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| |
| dprintk(DEBUG_NORMAL, "usbs=%02x, usbds=%02x, pwr=%02x ep0csr=%02x\n", |
| usb_status, usbd_status, pwr_reg, ep0csr); |
| |
| /* |
| * Now, handle interrupts. There's two types : |
| * - Reset, Resume, Suspend coming -> usb_int_reg |
| * - EP -> ep_int_reg |
| */ |
| |
| /* RESET */ |
| if (usb_status & S3C2410_UDC_USBINT_RESET) { |
| /* two kind of reset : |
| * - reset start -> pwr reg = 8 |
| * - reset end -> pwr reg = 0 |
| **/ |
| dprintk(DEBUG_NORMAL, "USB reset csr %x pwr %x\n", |
| ep0csr, pwr_reg); |
| |
| dev->gadget.speed = USB_SPEED_UNKNOWN; |
| udc_write(0x00, S3C2410_UDC_INDEX_REG); |
| udc_write((dev->ep[0].ep.maxpacket & 0x7ff) >> 3, |
| S3C2410_UDC_MAXP_REG); |
| dev->address = 0; |
| |
| dev->ep0state = EP0_IDLE; |
| dev->gadget.speed = USB_SPEED_FULL; |
| |
| /* clear interrupt */ |
| udc_write(S3C2410_UDC_USBINT_RESET, |
| S3C2410_UDC_USB_INT_REG); |
| |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| /* RESUME */ |
| if (usb_status & S3C2410_UDC_USBINT_RESUME) { |
| dprintk(DEBUG_NORMAL, "USB resume\n"); |
| |
| /* clear interrupt */ |
| udc_write(S3C2410_UDC_USBINT_RESUME, |
| S3C2410_UDC_USB_INT_REG); |
| |
| if (dev->gadget.speed != USB_SPEED_UNKNOWN |
| && dev->driver |
| && dev->driver->resume) |
| dev->driver->resume(&dev->gadget); |
| } |
| |
| /* SUSPEND */ |
| if (usb_status & S3C2410_UDC_USBINT_SUSPEND) { |
| dprintk(DEBUG_NORMAL, "USB suspend\n"); |
| |
| /* clear interrupt */ |
| udc_write(S3C2410_UDC_USBINT_SUSPEND, |
| S3C2410_UDC_USB_INT_REG); |
| |
| if (dev->gadget.speed != USB_SPEED_UNKNOWN |
| && dev->driver |
| && dev->driver->suspend) |
| dev->driver->suspend(&dev->gadget); |
| |
| dev->ep0state = EP0_IDLE; |
| } |
| |
| /* EP */ |
| /* control traffic */ |
| /* check on ep0csr != 0 is not a good idea as clearing in_pkt_ready |
| * generate an interrupt |
| */ |
| if (usbd_status & S3C2410_UDC_INT_EP0) { |
| dprintk(DEBUG_VERBOSE, "USB ep0 irq\n"); |
| /* Clear the interrupt bit by setting it to 1 */ |
| udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG); |
| s3c2410_udc_handle_ep0(dev); |
| } |
| |
| /* endpoint data transfers */ |
| for (i = 1; i < S3C2410_ENDPOINTS; i++) { |
| u32 tmp = 1 << i; |
| if (usbd_status & tmp) { |
| dprintk(DEBUG_VERBOSE, "USB ep%d irq\n", i); |
| |
| /* Clear the interrupt bit by setting it to 1 */ |
| udc_write(tmp, S3C2410_UDC_EP_INT_REG); |
| s3c2410_udc_handle_ep(&dev->ep[i]); |
| } |
| } |
| |
| /* what else causes this interrupt? a receive! who is it? */ |
| if (!usb_status && !usbd_status && !pwr_reg && !ep0csr) { |
| for (i = 1; i < S3C2410_ENDPOINTS; i++) { |
| idx2 = udc_read(S3C2410_UDC_INDEX_REG); |
| udc_write(i, S3C2410_UDC_INDEX_REG); |
| |
| if (udc_read(S3C2410_UDC_OUT_CSR1_REG) & 0x1) |
| s3c2410_udc_handle_ep(&dev->ep[i]); |
| |
| /* restore index */ |
| udc_write(idx2, S3C2410_UDC_INDEX_REG); |
| } |
| } |
| |
| dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD); |
| |
| /* Restore old index */ |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| return IRQ_HANDLED; |
| } |
| /*------------------------- s3c2410_ep_ops ----------------------------------*/ |
| |
| static inline struct s3c2410_ep *to_s3c2410_ep(struct usb_ep *ep) |
| { |
| return container_of(ep, struct s3c2410_ep, ep); |
| } |
| |
| static inline struct s3c2410_udc *to_s3c2410_udc(struct usb_gadget *gadget) |
| { |
| return container_of(gadget, struct s3c2410_udc, gadget); |
| } |
| |
| static inline struct s3c2410_request *to_s3c2410_req(struct usb_request *req) |
| { |
| return container_of(req, struct s3c2410_request, req); |
| } |
| |
| /* |
| * s3c2410_udc_ep_enable |
| */ |
| static int s3c2410_udc_ep_enable(struct usb_ep *_ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct s3c2410_udc *dev; |
| struct s3c2410_ep *ep; |
| u32 max, tmp; |
| unsigned long flags; |
| u32 csr1, csr2; |
| u32 int_en_reg; |
| |
| ep = to_s3c2410_ep(_ep); |
| |
| if (!_ep || !desc |
| || _ep->name == ep0name |
| || desc->bDescriptorType != USB_DT_ENDPOINT) |
| return -EINVAL; |
| |
| dev = ep->dev; |
| if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) |
| return -ESHUTDOWN; |
| |
| max = usb_endpoint_maxp(desc) & 0x1fff; |
| |
| local_irq_save(flags); |
| _ep->maxpacket = max & 0x7ff; |
| ep->ep.desc = desc; |
| ep->halted = 0; |
| ep->bEndpointAddress = desc->bEndpointAddress; |
| |
| /* set max packet */ |
| udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| udc_write(max >> 3, S3C2410_UDC_MAXP_REG); |
| |
| /* set type, direction, address; reset fifo counters */ |
| if (desc->bEndpointAddress & USB_DIR_IN) { |
| csr1 = S3C2410_UDC_ICSR1_FFLUSH|S3C2410_UDC_ICSR1_CLRDT; |
| csr2 = S3C2410_UDC_ICSR2_MODEIN|S3C2410_UDC_ICSR2_DMAIEN; |
| |
| udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| udc_write(csr1, S3C2410_UDC_IN_CSR1_REG); |
| udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| udc_write(csr2, S3C2410_UDC_IN_CSR2_REG); |
| } else { |
| /* don't flush in fifo or it will cause endpoint interrupt */ |
| csr1 = S3C2410_UDC_ICSR1_CLRDT; |
| csr2 = S3C2410_UDC_ICSR2_DMAIEN; |
| |
| udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| udc_write(csr1, S3C2410_UDC_IN_CSR1_REG); |
| udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| udc_write(csr2, S3C2410_UDC_IN_CSR2_REG); |
| |
| csr1 = S3C2410_UDC_OCSR1_FFLUSH | S3C2410_UDC_OCSR1_CLRDT; |
| csr2 = S3C2410_UDC_OCSR2_DMAIEN; |
| |
| udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| udc_write(csr1, S3C2410_UDC_OUT_CSR1_REG); |
| udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| udc_write(csr2, S3C2410_UDC_OUT_CSR2_REG); |
| } |
| |
| /* enable irqs */ |
| int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); |
| udc_write(int_en_reg | (1 << ep->num), S3C2410_UDC_EP_INT_EN_REG); |
| |
| /* print some debug message */ |
| tmp = desc->bEndpointAddress; |
| dprintk(DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n", |
| _ep->name, ep->num, tmp, |
| desc->bEndpointAddress & USB_DIR_IN ? "in" : "out", max); |
| |
| local_irq_restore(flags); |
| s3c2410_udc_set_halt(_ep, 0); |
| |
| return 0; |
| } |
| |
| /* |
| * s3c2410_udc_ep_disable |
| */ |
| static int s3c2410_udc_ep_disable(struct usb_ep *_ep) |
| { |
| struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| unsigned long flags; |
| u32 int_en_reg; |
| |
| if (!_ep || !ep->ep.desc) { |
| dprintk(DEBUG_NORMAL, "%s not enabled\n", |
| _ep ? ep->ep.name : NULL); |
| return -EINVAL; |
| } |
| |
| local_irq_save(flags); |
| |
| dprintk(DEBUG_NORMAL, "ep_disable: %s\n", _ep->name); |
| |
| ep->ep.desc = NULL; |
| ep->halted = 1; |
| |
| s3c2410_udc_nuke(ep->dev, ep, -ESHUTDOWN); |
| |
| /* disable irqs */ |
| int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); |
| udc_write(int_en_reg & ~(1<<ep->num), S3C2410_UDC_EP_INT_EN_REG); |
| |
| local_irq_restore(flags); |
| |
| dprintk(DEBUG_NORMAL, "%s disabled\n", _ep->name); |
| |
| return 0; |
| } |
| |
| /* |
| * s3c2410_udc_alloc_request |
| */ |
| static struct usb_request * |
| s3c2410_udc_alloc_request(struct usb_ep *_ep, gfp_t mem_flags) |
| { |
| struct s3c2410_request *req; |
| |
| dprintk(DEBUG_VERBOSE, "%s(%p,%d)\n", __func__, _ep, mem_flags); |
| |
| if (!_ep) |
| return NULL; |
| |
| req = kzalloc(sizeof(struct s3c2410_request), mem_flags); |
| if (!req) |
| return NULL; |
| |
| INIT_LIST_HEAD(&req->queue); |
| return &req->req; |
| } |
| |
| /* |
| * s3c2410_udc_free_request |
| */ |
| static void |
| s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| struct s3c2410_request *req = to_s3c2410_req(_req); |
| |
| dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req); |
| |
| if (!ep || !_req || (!ep->ep.desc && _ep->name != ep0name)) |
| return; |
| |
| WARN_ON(!list_empty(&req->queue)); |
| kfree(req); |
| } |
| |
| /* |
| * s3c2410_udc_queue |
| */ |
| static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, |
| gfp_t gfp_flags) |
| { |
| struct s3c2410_request *req = to_s3c2410_req(_req); |
| struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| struct s3c2410_udc *dev; |
| u32 ep_csr = 0; |
| int fifo_count = 0; |
| unsigned long flags; |
| |
| if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { |
| dprintk(DEBUG_NORMAL, "%s: invalid args\n", __func__); |
| return -EINVAL; |
| } |
| |
| dev = ep->dev; |
| if (unlikely(!dev->driver |
| || dev->gadget.speed == USB_SPEED_UNKNOWN)) { |
| return -ESHUTDOWN; |
| } |
| |
| local_irq_save(flags); |
| |
| if (unlikely(!_req || !_req->complete |
| || !_req->buf || !list_empty(&req->queue))) { |
| if (!_req) |
| dprintk(DEBUG_NORMAL, "%s: 1 X X X\n", __func__); |
| else { |
| dprintk(DEBUG_NORMAL, "%s: 0 %01d %01d %01d\n", |
| __func__, !_req->complete, !_req->buf, |
| !list_empty(&req->queue)); |
| } |
| |
| local_irq_restore(flags); |
| return -EINVAL; |
| } |
| |
| _req->status = -EINPROGRESS; |
| _req->actual = 0; |
| |
| dprintk(DEBUG_VERBOSE, "%s: ep%x len %d\n", |
| __func__, ep->bEndpointAddress, _req->length); |
| |
| if (ep->bEndpointAddress) { |
| udc_write(ep->bEndpointAddress & 0x7F, S3C2410_UDC_INDEX_REG); |
| |
| ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN) |
| ? S3C2410_UDC_IN_CSR1_REG |
| : S3C2410_UDC_OUT_CSR1_REG); |
| fifo_count = s3c2410_udc_fifo_count_out(); |
| } else { |
| udc_write(0, S3C2410_UDC_INDEX_REG); |
| ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| fifo_count = s3c2410_udc_fifo_count_out(); |
| } |
| |
| /* kickstart this i/o queue? */ |
| if (list_empty(&ep->queue) && !ep->halted) { |
| if (ep->bEndpointAddress == 0 /* ep0 */) { |
| switch (dev->ep0state) { |
| case EP0_IN_DATA_PHASE: |
| if (!(ep_csr&S3C2410_UDC_EP0_CSR_IPKRDY) |
| && s3c2410_udc_write_fifo(ep, |
| req)) { |
| dev->ep0state = EP0_IDLE; |
| req = NULL; |
| } |
| break; |
| |
| case EP0_OUT_DATA_PHASE: |
| if ((!_req->length) |
| || ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY) |
| && s3c2410_udc_read_fifo(ep, |
| req))) { |
| dev->ep0state = EP0_IDLE; |
| req = NULL; |
| } |
| break; |
| |
| default: |
| local_irq_restore(flags); |
| return -EL2HLT; |
| } |
| } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0 |
| && (!(ep_csr&S3C2410_UDC_OCSR1_PKTRDY)) |
| && s3c2410_udc_write_fifo(ep, req)) { |
| req = NULL; |
| } else if ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY) |
| && fifo_count |
| && s3c2410_udc_read_fifo(ep, req)) { |
| req = NULL; |
| } |
| } |
| |
| /* pio or dma irq handler advances the queue. */ |
| if (likely(req)) |
| list_add_tail(&req->queue, &ep->queue); |
| |
| local_irq_restore(flags); |
| |
| dprintk(DEBUG_VERBOSE, "%s ok\n", __func__); |
| return 0; |
| } |
| |
| /* |
| * s3c2410_udc_dequeue |
| */ |
| static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| struct s3c2410_udc *udc; |
| int retval = -EINVAL; |
| unsigned long flags; |
| struct s3c2410_request *req = NULL; |
| |
| dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req); |
| |
| if (!the_controller->driver) |
| return -ESHUTDOWN; |
| |
| if (!_ep || !_req) |
| return retval; |
| |
| udc = to_s3c2410_udc(ep->gadget); |
| |
| local_irq_save(flags); |
| |
| list_for_each_entry(req, &ep->queue, queue) { |
| if (&req->req == _req) { |
| list_del_init(&req->queue); |
| _req->status = -ECONNRESET; |
| retval = 0; |
| break; |
| } |
| } |
| |
| if (retval == 0) { |
| dprintk(DEBUG_VERBOSE, |
| "dequeued req %p from %s, len %d buf %p\n", |
| req, _ep->name, _req->length, _req->buf); |
| |
| s3c2410_udc_done(ep, req, -ECONNRESET); |
| } |
| |
| local_irq_restore(flags); |
| return retval; |
| } |
| |
| /* |
| * s3c2410_udc_set_halt |
| */ |
| static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) |
| { |
| struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| u32 ep_csr = 0; |
| unsigned long flags; |
| u32 idx; |
| |
| if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { |
| dprintk(DEBUG_NORMAL, "%s: inval 2\n", __func__); |
| return -EINVAL; |
| } |
| |
| local_irq_save(flags); |
| |
| idx = ep->bEndpointAddress & 0x7F; |
| |
| if (idx == 0) { |
| s3c2410_udc_set_ep0_ss(base_addr); |
| s3c2410_udc_set_ep0_de_out(base_addr); |
| } else { |
| udc_write(idx, S3C2410_UDC_INDEX_REG); |
| ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN) |
| ? S3C2410_UDC_IN_CSR1_REG |
| : S3C2410_UDC_OUT_CSR1_REG); |
| |
| if ((ep->bEndpointAddress & USB_DIR_IN) != 0) { |
| if (value) |
| udc_write(ep_csr | S3C2410_UDC_ICSR1_SENDSTL, |
| S3C2410_UDC_IN_CSR1_REG); |
| else { |
| ep_csr &= ~S3C2410_UDC_ICSR1_SENDSTL; |
| udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG); |
| ep_csr |= S3C2410_UDC_ICSR1_CLRDT; |
| udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG); |
| } |
| } else { |
| if (value) |
| udc_write(ep_csr | S3C2410_UDC_OCSR1_SENDSTL, |
| S3C2410_UDC_OUT_CSR1_REG); |
| else { |
| ep_csr &= ~S3C2410_UDC_OCSR1_SENDSTL; |
| udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG); |
| ep_csr |= S3C2410_UDC_OCSR1_CLRDT; |
| udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG); |
| } |
| } |
| } |
| |
| ep->halted = value ? 1 : 0; |
| local_irq_restore(flags); |
| |
| return 0; |
| } |
| |
| static const struct usb_ep_ops s3c2410_ep_ops = { |
| .enable = s3c2410_udc_ep_enable, |
| .disable = s3c2410_udc_ep_disable, |
| |
| .alloc_request = s3c2410_udc_alloc_request, |
| .free_request = s3c2410_udc_free_request, |
| |
| .queue = s3c2410_udc_queue, |
| .dequeue = s3c2410_udc_dequeue, |
| |
| .set_halt = s3c2410_udc_set_halt, |
| }; |
| |
| /*------------------------- usb_gadget_ops ----------------------------------*/ |
| |
| /* |
| * s3c2410_udc_get_frame |
| */ |
| static int s3c2410_udc_get_frame(struct usb_gadget *_gadget) |
| { |
| int tmp; |
| |
| dprintk(DEBUG_VERBOSE, "%s()\n", __func__); |
| |
| tmp = udc_read(S3C2410_UDC_FRAME_NUM2_REG) << 8; |
| tmp |= udc_read(S3C2410_UDC_FRAME_NUM1_REG); |
| return tmp; |
| } |
| |
| /* |
| * s3c2410_udc_wakeup |
| */ |
| static int s3c2410_udc_wakeup(struct usb_gadget *_gadget) |
| { |
| dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| return 0; |
| } |
| |
| /* |
| * s3c2410_udc_set_selfpowered |
| */ |
| static int s3c2410_udc_set_selfpowered(struct usb_gadget *gadget, int value) |
| { |
| struct s3c2410_udc *udc = to_s3c2410_udc(gadget); |
| |
| dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| |
| if (value) |
| udc->devstatus |= (1 << USB_DEVICE_SELF_POWERED); |
| else |
| udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); |
| |
| return 0; |
| } |
| |
| static void s3c2410_udc_disable(struct s3c2410_udc *dev); |
| static void s3c2410_udc_enable(struct s3c2410_udc *dev); |
| |
| static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on) |
| { |
| dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| |
| if (udc_info && (udc_info->udc_command || |
| gpio_is_valid(udc_info->pullup_pin))) { |
| |
| if (is_on) |
| s3c2410_udc_enable(udc); |
| else { |
| if (udc->gadget.speed != USB_SPEED_UNKNOWN) { |
| if (udc->driver && udc->driver->disconnect) |
| udc->driver->disconnect(&udc->gadget); |
| |
| } |
| s3c2410_udc_disable(udc); |
| } |
| } else { |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int s3c2410_udc_vbus_session(struct usb_gadget *gadget, int is_active) |
| { |
| struct s3c2410_udc *udc = to_s3c2410_udc(gadget); |
| |
| dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| |
| udc->vbus = (is_active != 0); |
| s3c2410_udc_set_pullup(udc, is_active); |
| return 0; |
| } |
| |
| static int s3c2410_udc_pullup(struct usb_gadget *gadget, int is_on) |
| { |
| struct s3c2410_udc *udc = to_s3c2410_udc(gadget); |
| |
| dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| |
| s3c2410_udc_set_pullup(udc, is_on ? 0 : 1); |
| return 0; |
| } |
| |
| static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev) |
| { |
| struct s3c2410_udc *dev = _dev; |
| unsigned int value; |
| |
| dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| |
| value = gpio_get_value(udc_info->vbus_pin) ? 1 : 0; |
| if (udc_info->vbus_pin_inverted) |
| value = !value; |
| |
| if (value != dev->vbus) |
| s3c2410_udc_vbus_session(&dev->gadget, value); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma) |
| { |
| dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| |
| if (udc_info && udc_info->vbus_draw) { |
| udc_info->vbus_draw(ma); |
| return 0; |
| } |
| |
| return -ENOTSUPP; |
| } |
| |
| static int s3c2410_udc_start(struct usb_gadget *g, |
| struct usb_gadget_driver *driver); |
| static int s3c2410_udc_stop(struct usb_gadget *g, |
| struct usb_gadget_driver *driver); |
| |
| static const struct usb_gadget_ops s3c2410_ops = { |
| .get_frame = s3c2410_udc_get_frame, |
| .wakeup = s3c2410_udc_wakeup, |
| .set_selfpowered = s3c2410_udc_set_selfpowered, |
| .pullup = s3c2410_udc_pullup, |
| .vbus_session = s3c2410_udc_vbus_session, |
| .vbus_draw = s3c2410_vbus_draw, |
| .udc_start = s3c2410_udc_start, |
| .udc_stop = s3c2410_udc_stop, |
| }; |
| |
| static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd) |
| { |
| if (!udc_info) |
| return; |
| |
| if (udc_info->udc_command) { |
| udc_info->udc_command(cmd); |
| } else if (gpio_is_valid(udc_info->pullup_pin)) { |
| int value; |
| |
| switch (cmd) { |
| case S3C2410_UDC_P_ENABLE: |
| value = 1; |
| break; |
| case S3C2410_UDC_P_DISABLE: |
| value = 0; |
| break; |
| default: |
| return; |
| } |
| value ^= udc_info->pullup_pin_inverted; |
| |
| gpio_set_value(udc_info->pullup_pin, value); |
| } |
| } |
| |
| /*------------------------- gadget driver handling---------------------------*/ |
| /* |
| * s3c2410_udc_disable |
| */ |
| static void s3c2410_udc_disable(struct s3c2410_udc *dev) |
| { |
| dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| |
| /* Disable all interrupts */ |
| udc_write(0x00, S3C2410_UDC_USB_INT_EN_REG); |
| udc_write(0x00, S3C2410_UDC_EP_INT_EN_REG); |
| |
| /* Clear the interrupt registers */ |
| udc_write(S3C2410_UDC_USBINT_RESET |
| | S3C2410_UDC_USBINT_RESUME |
| | S3C2410_UDC_USBINT_SUSPEND, |
| S3C2410_UDC_USB_INT_REG); |
| |
| udc_write(0x1F, S3C2410_UDC_EP_INT_REG); |
| |
| /* Good bye, cruel world */ |
| s3c2410_udc_command(S3C2410_UDC_P_DISABLE); |
| |
| /* Set speed to unknown */ |
| dev->gadget.speed = USB_SPEED_UNKNOWN; |
| } |
| |
| /* |
| * s3c2410_udc_reinit |
| */ |
| static void s3c2410_udc_reinit(struct s3c2410_udc *dev) |
| { |
| u32 i; |
| |
| /* device/ep0 records init */ |
| INIT_LIST_HEAD(&dev->gadget.ep_list); |
| INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); |
| dev->ep0state = EP0_IDLE; |
| |
| for (i = 0; i < S3C2410_ENDPOINTS; i++) { |
| struct s3c2410_ep *ep = &dev->ep[i]; |
| |
| if (i != 0) |
| list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); |
| |
| ep->dev = dev; |
| ep->ep.desc = NULL; |
| ep->halted = 0; |
| INIT_LIST_HEAD(&ep->queue); |
| } |
| } |
| |
| /* |
| * s3c2410_udc_enable |
| */ |
| static void s3c2410_udc_enable(struct s3c2410_udc *dev) |
| { |
| int i; |
| |
| dprintk(DEBUG_NORMAL, "s3c2410_udc_enable called\n"); |
| |
| /* dev->gadget.speed = USB_SPEED_UNKNOWN; */ |
| dev->gadget.speed = USB_SPEED_FULL; |
| |
| /* Set MAXP for all endpoints */ |
| for (i = 0; i < S3C2410_ENDPOINTS; i++) { |
| udc_write(i, S3C2410_UDC_INDEX_REG); |
| udc_write((dev->ep[i].ep.maxpacket & 0x7ff) >> 3, |
| S3C2410_UDC_MAXP_REG); |
| } |
| |
| /* Set default power state */ |
| udc_write(DEFAULT_POWER_STATE, S3C2410_UDC_PWR_REG); |
| |
| /* Enable reset and suspend interrupt interrupts */ |
| udc_write(S3C2410_UDC_USBINT_RESET | S3C2410_UDC_USBINT_SUSPEND, |
| S3C2410_UDC_USB_INT_EN_REG); |
| |
| /* Enable ep0 interrupt */ |
| udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG); |
| |
| /* time to say "hello, world" */ |
| s3c2410_udc_command(S3C2410_UDC_P_ENABLE); |
| } |
| |
| static int s3c2410_udc_start(struct usb_gadget *g, |
| struct usb_gadget_driver *driver) |
| { |
| struct s3c2410_udc *udc = to_s3c2410(g); |
| |
| dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name); |
| |
| /* Hook the driver */ |
| udc->driver = driver; |
| |
| /* Enable udc */ |
| s3c2410_udc_enable(udc); |
| |
| return 0; |
| } |
| |
| static int s3c2410_udc_stop(struct usb_gadget *g, |
| struct usb_gadget_driver *driver) |
| { |
| struct s3c2410_udc *udc = to_s3c2410(g); |
| |
| udc->driver = NULL; |
| |
| /* Disable udc */ |
| s3c2410_udc_disable(udc); |
| |
| return 0; |
| } |
| |
| /*---------------------------------------------------------------------------*/ |
| static struct s3c2410_udc memory = { |
| .gadget = { |
| .ops = &s3c2410_ops, |
| .ep0 = &memory.ep[0].ep, |
| .name = gadget_name, |
| .dev = { |
| .init_name = "gadget", |
| }, |
| }, |
| |
| /* control endpoint */ |
| .ep[0] = { |
| .num = 0, |
| .ep = { |
| .name = ep0name, |
| .ops = &s3c2410_ep_ops, |
| .maxpacket = EP0_FIFO_SIZE, |
| }, |
| .dev = &memory, |
| }, |
| |
| /* first group of endpoints */ |
| .ep[1] = { |
| .num = 1, |
| .ep = { |
| .name = "ep1-bulk", |
| .ops = &s3c2410_ep_ops, |
| .maxpacket = EP_FIFO_SIZE, |
| }, |
| .dev = &memory, |
| .fifo_size = EP_FIFO_SIZE, |
| .bEndpointAddress = 1, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }, |
| .ep[2] = { |
| .num = 2, |
| .ep = { |
| .name = "ep2-bulk", |
| .ops = &s3c2410_ep_ops, |
| .maxpacket = EP_FIFO_SIZE, |
| }, |
| .dev = &memory, |
| .fifo_size = EP_FIFO_SIZE, |
| .bEndpointAddress = 2, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }, |
| .ep[3] = { |
| .num = 3, |
| .ep = { |
| .name = "ep3-bulk", |
| .ops = &s3c2410_ep_ops, |
| .maxpacket = EP_FIFO_SIZE, |
| }, |
| .dev = &memory, |
| .fifo_size = EP_FIFO_SIZE, |
| .bEndpointAddress = 3, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }, |
| .ep[4] = { |
| .num = 4, |
| .ep = { |
| .name = "ep4-bulk", |
| .ops = &s3c2410_ep_ops, |
| .maxpacket = EP_FIFO_SIZE, |
| }, |
| .dev = &memory, |
| .fifo_size = EP_FIFO_SIZE, |
| .bEndpointAddress = 4, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| } |
| |
| }; |
| |
| /* |
| * probe - binds to the platform device |
| */ |
| static int s3c2410_udc_probe(struct platform_device *pdev) |
| { |
| struct s3c2410_udc *udc = &memory; |
| struct device *dev = &pdev->dev; |
| int retval; |
| int irq; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| usb_bus_clock = clk_get(NULL, "usb-bus-gadget"); |
| if (IS_ERR(usb_bus_clock)) { |
| dev_err(dev, "failed to get usb bus clock source\n"); |
| return PTR_ERR(usb_bus_clock); |
| } |
| |
| clk_enable(usb_bus_clock); |
| |
| udc_clock = clk_get(NULL, "usb-device"); |
| if (IS_ERR(udc_clock)) { |
| dev_err(dev, "failed to get udc clock source\n"); |
| return PTR_ERR(udc_clock); |
| } |
| |
| clk_enable(udc_clock); |
| |
| mdelay(10); |
| |
| dev_dbg(dev, "got and enabled clocks\n"); |
| |
| if (strncmp(pdev->name, "s3c2440", 7) == 0) { |
| dev_info(dev, "S3C2440: increasing FIFO to 128 bytes\n"); |
| memory.ep[1].fifo_size = S3C2440_EP_FIFO_SIZE; |
| memory.ep[2].fifo_size = S3C2440_EP_FIFO_SIZE; |
| memory.ep[3].fifo_size = S3C2440_EP_FIFO_SIZE; |
| memory.ep[4].fifo_size = S3C2440_EP_FIFO_SIZE; |
| } |
| |
| spin_lock_init(&udc->lock); |
| udc_info = pdev->dev.platform_data; |
| |
| rsrc_start = S3C2410_PA_USBDEV; |
| rsrc_len = S3C24XX_SZ_USBDEV; |
| |
| if (!request_mem_region(rsrc_start, rsrc_len, gadget_name)) |
| return -EBUSY; |
| |
| base_addr = ioremap(rsrc_start, rsrc_len); |
| if (!base_addr) { |
| retval = -ENOMEM; |
| goto err_mem; |
| } |
| |
| the_controller = udc; |
| platform_set_drvdata(pdev, udc); |
| |
| s3c2410_udc_disable(udc); |
| s3c2410_udc_reinit(udc); |
| |
| /* irq setup after old hardware state is cleaned up */ |
| retval = request_irq(IRQ_USBD, s3c2410_udc_irq, |
| 0, gadget_name, udc); |
| |
| if (retval != 0) { |
| dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval); |
| retval = -EBUSY; |
| goto err_map; |
| } |
| |
| dev_dbg(dev, "got irq %i\n", IRQ_USBD); |
| |
| if (udc_info && udc_info->vbus_pin > 0) { |
| retval = gpio_request(udc_info->vbus_pin, "udc vbus"); |
| if (retval < 0) { |
| dev_err(dev, "cannot claim vbus pin\n"); |
| goto err_int; |
| } |
| |
| irq = gpio_to_irq(udc_info->vbus_pin); |
| if (irq < 0) { |
| dev_err(dev, "no irq for gpio vbus pin\n"); |
| goto err_gpio_claim; |
| } |
| |
| retval = request_irq(irq, s3c2410_udc_vbus_irq, |
| IRQF_TRIGGER_RISING |
| | IRQF_TRIGGER_FALLING | IRQF_SHARED, |
| gadget_name, udc); |
| |
| if (retval != 0) { |
| dev_err(dev, "can't get vbus irq %d, err %d\n", |
| irq, retval); |
| retval = -EBUSY; |
| goto err_gpio_claim; |
| } |
| |
| dev_dbg(dev, "got irq %i\n", irq); |
| } else { |
| udc->vbus = 1; |
| } |
| |
| if (udc_info && !udc_info->udc_command && |
| gpio_is_valid(udc_info->pullup_pin)) { |
| |
| retval = gpio_request_one(udc_info->pullup_pin, |
| udc_info->vbus_pin_inverted ? |
| GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, |
| "udc pullup"); |
| if (retval) |
| goto err_vbus_irq; |
| } |
| |
| retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); |
| if (retval) |
| goto err_add_udc; |
| |
| if (s3c2410_udc_debugfs_root) { |
| udc->regs_info = debugfs_create_file("registers", S_IRUGO, |
| s3c2410_udc_debugfs_root, |
| udc, &s3c2410_udc_debugfs_fops); |
| if (!udc->regs_info) |
| dev_warn(dev, "debugfs file creation failed\n"); |
| } |
| |
| dev_dbg(dev, "probe ok\n"); |
| |
| return 0; |
| |
| err_add_udc: |
| if (udc_info && !udc_info->udc_command && |
| gpio_is_valid(udc_info->pullup_pin)) |
| gpio_free(udc_info->pullup_pin); |
| err_vbus_irq: |
| if (udc_info && udc_info->vbus_pin > 0) |
| free_irq(gpio_to_irq(udc_info->vbus_pin), udc); |
| err_gpio_claim: |
| if (udc_info && udc_info->vbus_pin > 0) |
| gpio_free(udc_info->vbus_pin); |
| err_int: |
| free_irq(IRQ_USBD, udc); |
| err_map: |
| iounmap(base_addr); |
| err_mem: |
| release_mem_region(rsrc_start, rsrc_len); |
| |
| return retval; |
| } |
| |
| /* |
| * s3c2410_udc_remove |
| */ |
| static int s3c2410_udc_remove(struct platform_device *pdev) |
| { |
| struct s3c2410_udc *udc = platform_get_drvdata(pdev); |
| unsigned int irq; |
| |
| dev_dbg(&pdev->dev, "%s()\n", __func__); |
| |
| if (udc->driver) |
| return -EBUSY; |
| |
| usb_del_gadget_udc(&udc->gadget); |
| debugfs_remove(udc->regs_info); |
| |
| if (udc_info && !udc_info->udc_command && |
| gpio_is_valid(udc_info->pullup_pin)) |
| gpio_free(udc_info->pullup_pin); |
| |
| if (udc_info && udc_info->vbus_pin > 0) { |
| irq = gpio_to_irq(udc_info->vbus_pin); |
| free_irq(irq, udc); |
| } |
| |
| free_irq(IRQ_USBD, udc); |
| |
| iounmap(base_addr); |
| release_mem_region(rsrc_start, rsrc_len); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| if (!IS_ERR(udc_clock) && udc_clock != NULL) { |
| clk_disable(udc_clock); |
| clk_put(udc_clock); |
| udc_clock = NULL; |
| } |
| |
| if (!IS_ERR(usb_bus_clock) && usb_bus_clock != NULL) { |
| clk_disable(usb_bus_clock); |
| clk_put(usb_bus_clock); |
| usb_bus_clock = NULL; |
| } |
| |
| dev_dbg(&pdev->dev, "%s: remove ok\n", __func__); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int |
| s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) |
| { |
| s3c2410_udc_command(S3C2410_UDC_P_DISABLE); |
| |
| return 0; |
| } |
| |
| static int s3c2410_udc_resume(struct platform_device *pdev) |
| { |
| s3c2410_udc_command(S3C2410_UDC_P_ENABLE); |
| |
| return 0; |
| } |
| #else |
| #define s3c2410_udc_suspend NULL |
| #define s3c2410_udc_resume NULL |
| #endif |
| |
| static const struct platform_device_id s3c_udc_ids[] = { |
| { "s3c2410-usbgadget", }, |
| { "s3c2440-usbgadget", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(platform, s3c_udc_ids); |
| |
| static struct platform_driver udc_driver_24x0 = { |
| .driver = { |
| .name = "s3c24x0-usbgadget", |
| .owner = THIS_MODULE, |
| }, |
| .probe = s3c2410_udc_probe, |
| .remove = s3c2410_udc_remove, |
| .suspend = s3c2410_udc_suspend, |
| .resume = s3c2410_udc_resume, |
| .id_table = s3c_udc_ids, |
| }; |
| |
| static int __init udc_init(void) |
| { |
| int retval; |
| |
| dprintk(DEBUG_NORMAL, "%s: version %s\n", gadget_name, DRIVER_VERSION); |
| |
| s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL); |
| if (IS_ERR(s3c2410_udc_debugfs_root)) { |
| pr_err("%s: debugfs dir creation failed %ld\n", |
| gadget_name, PTR_ERR(s3c2410_udc_debugfs_root)); |
| s3c2410_udc_debugfs_root = NULL; |
| } |
| |
| retval = platform_driver_register(&udc_driver_24x0); |
| if (retval) |
| goto err; |
| |
| return 0; |
| |
| err: |
| debugfs_remove(s3c2410_udc_debugfs_root); |
| return retval; |
| } |
| |
| static void __exit udc_exit(void) |
| { |
| platform_driver_unregister(&udc_driver_24x0); |
| debugfs_remove(s3c2410_udc_debugfs_root); |
| } |
| |
| module_init(udc_init); |
| module_exit(udc_exit); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_VERSION(DRIVER_VERSION); |
| MODULE_LICENSE("GPL"); |