Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
code cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
mm: Convert print_symbol to %pSR
gfs2: Convert print_symbol to %pSR
m32r: Convert print_symbol to %pSR
iostats.txt: add easy-to-find description for field 6
x86 cmpxchg.h: fix wrong comment
treewide: Fix typo in printk and comments
doc: devicetree: Fix various typos
docbook: fix 8250 naming in device-drivers
pata_pdc2027x: Fix compiler warning
treewide: Fix typo in printks
mei: Fix comments in drivers/misc/mei
treewide: Fix typos in kernel messages
pm44xx: Fix comment for "CONFIG_CPU_IDLE"
doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
mmzone: correct "pags" to "pages" in comment.
kernel-parameters: remove outdated 'noresidual' parameter
Remove spurious _H suffixes from ifdef comments
sound: Remove stray pluses from Kconfig file
radio-shark: Fix printk "CONFIG_LED_CLASS"
doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
...
diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml
index 4a5eaee..31dc4df 100644
--- a/Documentation/DocBook/media/dvb/dvbproperty.xml
+++ b/Documentation/DocBook/media/dvb/dvbproperty.xml
@@ -1,6 +1,6 @@
<section id="FE_GET_SET_PROPERTY">
<title><constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></title>
-<para>This section describes the DVB version 5 extention of the DVB-API, also
+<para>This section describes the DVB version 5 extension of the DVB-API, also
called "S2API", as this API were added to provide support for DVB-S2. It was
designed to be able to replace the old frontend API. Yet, the DISEQC and
the capability ioctls weren't implemented yet via the new way.</para>
@@ -952,7 +952,7 @@
<para>Measures the amount of bits received before the inner code block, during the same period as
<link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link> measurement was taken.</para>
<para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream,
- as the frontend may need to manually restart the measurement, loosing some data between each measurement interval.</para>
+ as the frontend may need to manually restart the measurement, losing some data between each measurement interval.</para>
<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
The frontend may reset it when a channel/transponder is tuned.</para>
<para>Possible scales for this metric are:</para>
@@ -981,7 +981,7 @@
<para>Measures the amount of bits received after the inner coding, during the same period as
<link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link> measurement was taken.</para>
<para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream,
- as the frontend may need to manually restart the measurement, loosing some data between each measurement interval.</para>
+ as the frontend may need to manually restart the measurement, losing some data between each measurement interval.</para>
<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
The frontend may reset it when a channel/transponder is tuned.</para>
<para>Possible scales for this metric are:</para>
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index f336ede..09027a9 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -196,7 +196,7 @@
But see section 8.2: when moving a task to another cgroup, its pages may
be recharged to the new cgroup, if move_charge_at_immigrate has been chosen.
-Exception: If CONFIG_CGROUP_CGROUP_MEMCG_SWAP is not used.
+Exception: If CONFIG_MEMCG_SWAP is not used.
When you do swapoff and make swapped-out pages of shmem(tmpfs) to
be backed into memory in force, charges for pages are accounted against the
caller of swapoff rather than the users of shmem.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
index f98d4c5..296eb45 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
@@ -26,7 +26,7 @@
- pinctrl-names: Should contain only one value - "default".
Optional properties:
- - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
+ - samsung,i2c-slave-addr: Slave address in multi-master environment. If not
specified, default value is 0.
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
specified, the default value in Hz is 100000.
diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt
index 2b6693b..80ff3df 100644
--- a/Documentation/devicetree/bindings/leds/tca6507.txt
+++ b/Documentation/devicetree/bindings/leds/tca6507.txt
@@ -1,4 +1,4 @@
-LEDs conected to tca6507
+LEDs connected to tca6507
Required properties:
- compatible : should be : "ti,tca6507".
diff --git a/Documentation/devicetree/bindings/metag/meta-intc.txt b/Documentation/devicetree/bindings/metag/meta-intc.txt
index 8c47dcb..80994ad 100644
--- a/Documentation/devicetree/bindings/metag/meta-intc.txt
+++ b/Documentation/devicetree/bindings/metag/meta-intc.txt
@@ -12,7 +12,7 @@
handle 32 interrupt sources).
- interrupt-controller: The presence of this property identifies the node
- as an interupt controller. No property value shall be defined.
+ as an interrupt controller. No property value shall be defined.
- #interrupt-cells: Specifies the number of cells needed to encode an
interrupt source. The type shall be a <u32> and the value shall be 2.
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index bc50899..648d60e 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -1,6 +1,6 @@
* Atmel AT91 Pinmux Controller
-The AT91 Pinmux Controler, enables the IC
+The AT91 Pinmux Controller, enables the IC
to share one PAD to several functional blocks. The sharing is done by
multiplexing the PAD input/output signals. For each PAD there are up to
8 muxing options (called periph modes). Since different modules require
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index 8edc20e..2569866 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -5,7 +5,7 @@
Required properties:
- compatible: "brcm,bcm2835-gpio"
-- reg: Should contain the physical address of the GPIO module's registes.
+- reg: Should contain the physical address of the GPIO module's registers.
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters:
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index 9a599d2..0347d83 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -2,7 +2,7 @@
QNAP NAS devices have a microcontroller controlling the main power
supply. This microcontroller is connected to UART1 of the Kirkwood and
-Orion5x SoCs. Sending the charactor 'A', at 19200 baud, tells the
+Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
microcontroller to turn the power off. This driver adds a handler to
pm_power_off which is called to turn the power off.
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 9fd69a1..9e5e51d 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -28,7 +28,7 @@
safe operating voltage).
If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
- property is specified, then all the eigth voltage values for the
+ property is specified, then all the eight voltage values for the
'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
Optional properties:
diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
index f575302..33fd354 100644
--- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
+++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
@@ -6,7 +6,7 @@
usb 2.0 phy for s3c-hsotg as well as ehci-s5p and ohci-exynos
usb controllers across Samsung SOCs.
TODO: Adding the PHY binding with controller(s) according to the under
-developement generic PHY driver.
+development generic PHY driver.
Required properties:
diff --git a/Documentation/iostats.txt b/Documentation/iostats.txt
index c76c21d..65f694f 100644
--- a/Documentation/iostats.txt
+++ b/Documentation/iostats.txt
@@ -71,6 +71,8 @@
measured from __make_request() to end_that_request_last()).
Field 5 -- # of writes completed
This is the total number of writes completed successfully.
+Field 6 -- # of writes merged
+ See the description of field 2.
Field 7 -- # of sectors written
This is the total number of sectors written successfully.
Field 8 -- # of milliseconds spent writing
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b801a33..8c01a02 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1675,7 +1675,7 @@
module.sig_enforce
[KNL] When CONFIG_MODULE_SIG is set, this means that
modules without (valid) signatures will fail to load.
- Note that if CONFIG_MODULE_SIG_ENFORCE is set, that
+ Note that if CONFIG_MODULE_SIG_FORCE is set, that
is always true, so this option does nothing.
mousedev.tap_time=
@@ -2024,8 +2024,6 @@
noreplace-smp [X86-32,SMP] Don't replace SMP instructions
with UP alternatives
- noresidual [PPC] Don't use residual data on PReP machines.
-
nordrand [X86] Disable the direct use of the RDRAND
instruction even if it is supported by the
processor. RDRAND is still available to user
diff --git a/Documentation/trace/tracepoints.txt b/Documentation/trace/tracepoints.txt
index c0e1cee..da49437 100644
--- a/Documentation/trace/tracepoints.txt
+++ b/Documentation/trace/tracepoints.txt
@@ -81,7 +81,6 @@
the module exit function to make sure there is no caller left using
the probe. This, and the fact that preemption is disabled around the
probe call, make sure that probe removal and module unload are safe.
-See the "Probe example" section below for a sample probe module.
The tracepoint mechanism supports inserting multiple instances of the
same tracepoint, but a single definition must be made of a given
@@ -100,17 +99,3 @@
If the tracepoint has to be used in kernel modules, an
EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be
used to export the defined tracepoints.
-
-* Probe / tracepoint example
-
-See the example provided in samples/tracepoints
-
-Compile them with your kernel. They are built during 'make' (not
-'make modules') when CONFIG_SAMPLE_TRACEPOINTS=m.
-
-Run, as root :
-modprobe tracepoint-sample (insmod order is not important)
-modprobe tracepoint-probe-sample
-cat /proc/tracepoint-sample (returns an expected error)
-rmmod tracepoint-sample tracepoint-probe-sample
-dmesg
diff --git a/Documentation/virtual/virtio-spec.txt b/Documentation/virtual/virtio-spec.txt
index 0d6ec85..eb09403 100644
--- a/Documentation/virtual/virtio-spec.txt
+++ b/Documentation/virtual/virtio-spec.txt
@@ -1389,7 +1389,7 @@
Packets are transmitted by placing them in the transmitq, and
buffers for incoming packets are placed in the receiveq. In each
-case, the packet itself is preceeded by a header:
+case, the packet itself is preceded by a header:
struct virtio_net_hdr {
@@ -1631,7 +1631,7 @@
The device can filter incoming packets by any number of
destination MAC addresses.[footnote:
-Since there are no guarentees, it can use a hash filter
+Since there are no guarantees, it can use a hash filter
orsilently switch to allmulti or promiscuous mode if it is given
too many addresses.
] This table is set using the class VIRTIO_NET_CTRL_MAC and the
@@ -1822,7 +1822,7 @@
distinguish between them
]). If the device has VIRTIO_BLK_F_BARRIER feature the high bit
(VIRTIO_BLK_T_BARRIER) indicates that this request acts as a
-barrier and that all preceeding requests must be complete before
+barrier and that all preceding requests must be complete before
this one, and all following requests must not be started until
this is complete. Note that a barrier does not flush caches in
the underlying backend device in host, and thus does not serve as
diff --git a/arch/arc/kernel/disasm.c b/arch/arc/kernel/disasm.c
index 2f39028..d14764a 100644
--- a/arch/arc/kernel/disasm.c
+++ b/arch/arc/kernel/disasm.c
@@ -535,4 +535,4 @@
return instr.is_branch;
}
-#endif /* CONFIG_KGDB || CONFIG_MISALIGN_ACCESS || CONFIG_KPROBES */
+#endif /* CONFIG_KGDB || CONFIG_ARC_MISALIGN_ACCESS || CONFIG_KPROBES */
diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig
index b41e786..295cefe 100644
--- a/arch/arc/plat-arcfpga/Kconfig
+++ b/arch/arc/plat-arcfpga/Kconfig
@@ -53,7 +53,7 @@
bool "BVCI Bus Latency Unit"
depends on ARC_BOARD_ML509 || ARC_BOARD_ANGEL4
help
- IP to add artifical latency to BVCI Bus Based FPGA builds.
+ IP to add artificial latency to BVCI Bus Based FPGA builds.
The default latency (even worst case) for FPGA is non-realistic
(~10 SDRAM, ~5 SSRAM).
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 79282eb..f10316b 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -100,7 +100,7 @@
int alloc_size, cpu = 0;
alloc_size = nr_cpu_ids * sizeof(struct cpu_capacity);
- cpu_capacity = (struct cpu_capacity *)kzalloc(alloc_size, GFP_NOWAIT);
+ cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT);
while ((cn = of_find_node_by_type(cn, "cpu"))) {
const u32 *rate, *reg;
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index c1fe498..842098d 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -614,7 +614,7 @@
if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers)
|| !arm_exit_handlers[hsr_ec]) {
- kvm_err("Unkown exception class: %#08lx, "
+ kvm_err("Unknown exception class: %#08lx, "
"hsr: %#08x\n", hsr_ec,
(unsigned int)vcpu->arch.hsr);
BUG();
diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c
index d5970f5..830139a 100644
--- a/arch/arm/mach-mvebu/irq-armada-370-xp.c
+++ b/arch/arm/mach-mvebu/irq-armada-370-xp.c
@@ -57,7 +57,7 @@
/*
* In SMP mode:
* For shared global interrupts, mask/unmask global enable bit
- * For CPU interrtups, mask/unmask the calling CPU's bit
+ * For CPU interrupts, mask/unmask the calling CPU's bit
*/
static void armada_370_xp_irq_mask(struct irq_data *d)
{
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index ea62e75..152a10c 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -126,8 +126,8 @@
* omap_default_idle - OMAP4 default ilde routine.'
*
* Implements OMAP4 memory, IO ordering requirements which can't be addressed
- * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
- * by secondary CPU with CONFIG_CPUIDLE.
+ * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPU_IDLE and
+ * by secondary CPU with CONFIG_CPU_IDLE.
*/
static void omap_default_idle(void)
{
diff --git a/arch/blackfin/include/asm/bfin_sport3.h b/arch/blackfin/include/asm/bfin_sport3.h
index 03c0022..d82f5fa 100644
--- a/arch/blackfin/include/asm/bfin_sport3.h
+++ b/arch/blackfin/include/asm/bfin_sport3.h
@@ -41,7 +41,7 @@
#define SPORT_CTL_LAFS 0x00020000 /* Late Transmit frame select */
#define SPORT_CTL_RJUST 0x00040000 /* Right Justified mode select */
#define SPORT_CTL_FSED 0x00080000 /* External frame sync edge select */
-#define SPORT_CTL_TFIEN 0x00100000 /* Transmit finish interrrupt enable select */
+#define SPORT_CTL_TFIEN 0x00100000 /* Transmit finish interrupt enable select */
#define SPORT_CTL_GCLKEN 0x00200000 /* Gated clock mode select */
#define SPORT_CTL_SPENSEC 0x01000000 /* Enable secondary channel */
#define SPORT_CTL_SPTRAN 0x02000000 /* Data direction control */
diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c
index 3bcb207..9fe3467 100644
--- a/arch/m32r/kernel/traps.c
+++ b/arch/m32r/kernel/traps.c
@@ -132,10 +132,8 @@
printk("Call Trace: ");
while (!kstack_end(stack)) {
addr = *stack++;
- if (__kernel_text_address(addr)) {
- printk("[<%08lx>] ", addr);
- print_symbol("%s\n", addr);
- }
+ if (__kernel_text_address(addr))
+ printk("[<%08lx>] %pSR\n", addr, (void *)addr);
}
printk("\n");
}
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index bec1e93..48fbc2b 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -511,8 +511,7 @@
"detected: 0-length partition\n");
goto out;
}
- tmp_part = (struct nvram_partition *)
- kmalloc(sizeof(struct nvram_partition), GFP_KERNEL);
+ tmp_part = kmalloc(sizeof(struct nvram_partition), GFP_KERNEL);
err = -ENOMEM;
if (!tmp_part) {
printk(KERN_ERR "nvram_scan_partitions: kmalloc failed\n");
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 5e93438..dbdc15a 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -1039,7 +1039,7 @@
if (!vcpu_book3s)
goto out;
- vcpu_book3s->shadow_vcpu = (struct kvmppc_book3s_shadow_vcpu *)
+ vcpu_book3s->shadow_vcpu =
kzalloc(sizeof(*vcpu_book3s->shadow_vcpu), GFP_KERNEL);
if (!vcpu_book3s->shadow_vcpu)
goto free_vcpu;
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index 1630f43..4f5ef629 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -33,7 +33,7 @@
};
/*
- * The list of "main" irq classes on s390. This is the list of interrrupts
+ * The list of "main" irq classes on s390. This is the list of interrupts
* that appear both in /proc/stat ("intr" line) and /proc/interrupts.
* Historically only external and I/O interrupts have been part of /proc/stat.
* We can't add the split external and I/O sub classes since the first field
diff --git a/arch/s390/kvm/trace.h b/arch/s390/kvm/trace.h
index 53252d2d..c2f582bb1c 100644
--- a/arch/s390/kvm/trace.h
+++ b/arch/s390/kvm/trace.h
@@ -67,7 +67,7 @@
#define sie_intercept_code \
{0x04, "Instruction"}, \
{0x08, "Program interruption"}, \
- {0x0C, "Instruction and program interuption"}, \
+ {0x0C, "Instruction and program interruption"}, \
{0x10, "External request"}, \
{0x14, "External interruption"}, \
{0x18, "I/O request"}, \
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
index 8d871ea..d47786a 100644
--- a/arch/x86/include/asm/cmpxchg.h
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -35,7 +35,7 @@
/*
* An exchange-type operation, which takes a value and a pointer, and
- * returns a the old value.
+ * returns the old value.
*/
#define __xchg_op(ptr, arg, op, lock) \
({ \
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 3f94a88..c76e659 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -63,7 +63,9 @@
};
static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+#ifdef CONFIG_PM
static int pdc2027x_reinit_one(struct pci_dev *pdev);
+#endif
static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline);
static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 608f82f..dfc6fd0 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -311,7 +311,7 @@
intr_coalescing_ticks = ticks;
spin_unlock(&host->lock);
- DPRINTK("intrrupt coalescing, count = 0x%x, ticks = %x\n",
+ DPRINTK("interrupt coalescing, count = 0x%x, ticks = %x\n",
intr_coalescing_count, intr_coalescing_ticks);
DPRINTK("ICC register status: (hcr base: 0x%x) = 0x%x\n",
hcr_base, ioread32(hcr_base + ICC));
diff --git a/drivers/clk/mvebu/clk-core.c b/drivers/clk/mvebu/clk-core.c
index 2628610..0a53edb 100644
--- a/drivers/clk/mvebu/clk-core.c
+++ b/drivers/clk/mvebu/clk-core.c
@@ -157,7 +157,7 @@
cpu_freq_select = ((readl(sar) >> SARL_A370_PCLK_FREQ_OPT) &
SARL_A370_PCLK_FREQ_OPT_MASK);
if (cpu_freq_select >= ARRAY_SIZE(armada_370_cpu_frequencies)) {
- pr_err("CPU freq select unsuported %d\n", cpu_freq_select);
+ pr_err("CPU freq select unsupported %d\n", cpu_freq_select);
cpu_freq = 0;
} else
cpu_freq = armada_370_cpu_frequencies[cpu_freq_select];
@@ -279,7 +279,7 @@
SARH_AXP_PCLK_FREQ_OPT_MASK)
<< SARH_AXP_PCLK_FREQ_OPT_SHIFT);
if (cpu_freq_select >= ARRAY_SIZE(armada_xp_cpu_frequencies)) {
- pr_err("CPU freq select unsuported: %d\n", cpu_freq_select);
+ pr_err("CPU freq select unsupported: %d\n", cpu_freq_select);
cpu_freq = 0;
} else
cpu_freq = armada_xp_cpu_frequencies[cpu_freq_select];
diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
index 1c56f63..8acf004 100644
--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -66,7 +66,7 @@
/*
* load 1 to clear written reg:
- * resets the done interrrupt and returns the RNG to idle.
+ * resets the done interrupt and returns the RNG to idle.
*/
append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 8fc93f9..c3f5bd8 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2028,7 +2028,7 @@
}
if (channel_eq)
- DRM_DEBUG_KMS("Channel EQ done. DP Training successfull\n");
+ DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n");
intel_dp_set_link_train(intel_dp, DP, DP_TRAINING_PATTERN_DISABLE);
}
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d07a8cd..78413ec 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -451,7 +451,7 @@
int i, ret = true;
/* Would be simpler to allocate both in one go ? */
- buf = (u8 *)kzalloc(args_len * 2 + 2, GFP_KERNEL);
+ buf = kzalloc(args_len * 2 + 2, GFP_KERNEL);
if (!buf)
return false;
diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c
index 48f80cd..5a99d43 100644
--- a/drivers/gpu/drm/radeon/radeon_irq_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c
@@ -270,7 +270,7 @@
}
/**
- * radeon_irq_kms_fini - tear down driver interrrupt info
+ * radeon_irq_kms_fini - tear down driver interrupt info
*
* @rdev: radeon device pointer
*
diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c
index 261d7db..8acef65 100644
--- a/drivers/i2c/busses/i2c-puv3.c
+++ b/drivers/i2c/busses/i2c-puv3.c
@@ -199,7 +199,7 @@
adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
if (adapter == NULL) {
- dev_err(&pdev->dev, "can't allocate inteface!\n");
+ dev_err(&pdev->dev, "can't allocate interface!\n");
rc = -ENOMEM;
goto fail_nomem;
}
diff --git a/drivers/irqchip/irq-versatile-fpga.c b/drivers/irqchip/irq-versatile-fpga.c
index 9dbd82b..065b7a3 100644
--- a/drivers/irqchip/irq-versatile-fpga.c
+++ b/drivers/irqchip/irq-versatile-fpga.c
@@ -139,7 +139,7 @@
int i;
if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) {
- pr_err("%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__);
+ pr_err("%s: too few FPGA IRQ controllers, increase CONFIG_VERSATILE_FPGA_IRQ_NR\n", __func__);
return;
}
f = &fpga_irq_devices[fpga_irq_id];
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index b72afd8..3c5f249 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -3424,7 +3424,6 @@
p++;
isdn_tty_cmd_ATA(info);
return;
- break;
case 'D':
/* D - Dial */
if (info->msr & UART_MSR_DCD)
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 63502e7..7618fda 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -54,7 +54,7 @@
unsigned int fw_debug;
module_param(fw_debug, int, 0644);
-MODULE_PARM_DESC(fw_debug, "Firware debug level def:2");
+MODULE_PARM_DESC(fw_debug, "Firmware debug level def:2");
unsigned int encoder_buffers = SAA7164_MAX_ENCODER_BUFFERS;
module_param(encoder_buffers, int, 0644);
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
index beb6dba..98a9c09 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
@@ -1312,7 +1312,7 @@
int cnt;
spin_lock_irqsave(&dev->condlock, flags);
- mfc_debug(2, "Previos context: %d (bits %08lx)\n", dev->curr_ctx,
+ mfc_debug(2, "Previous context: %d (bits %08lx)\n", dev->curr_ctx,
dev->ctx_work_bits);
new_ctx = (dev->curr_ctx + 1) % MFC_NUM_CONTEXTS;
cnt = 0;
diff --git a/drivers/media/radio/radio-shark.c b/drivers/media/radio/radio-shark.c
index 8c309c7..8fa18ab 100644
--- a/drivers/media/radio/radio-shark.c
+++ b/drivers/media/radio/radio-shark.c
@@ -284,7 +284,7 @@
static int shark_register_leds(struct shark_device *shark, struct device *dev)
{
v4l2_warn(&shark->v4l2_dev,
- "CONFIG_LED_CLASS not enabled, LED support disabled\n");
+ "CONFIG_LEDS_CLASS not enabled, LED support disabled\n");
return 0;
}
static inline void shark_unregister_leds(struct shark_device *shark) { }
diff --git a/drivers/media/radio/radio-shark2.c b/drivers/media/radio/radio-shark2.c
index ef65ebb..9fb6697 100644
--- a/drivers/media/radio/radio-shark2.c
+++ b/drivers/media/radio/radio-shark2.c
@@ -250,7 +250,7 @@
static int shark_register_leds(struct shark_device *shark, struct device *dev)
{
v4l2_warn(&shark->v4l2_dev,
- "CONFIG_LED_CLASS not enabled, LED support disabled\n");
+ "CONFIG_LEDS_CLASS not enabled, LED support disabled\n");
return 0;
}
static inline void shark_unregister_leds(struct shark_device *shark) { }
diff --git a/drivers/media/usb/dvb-usb/opera1.c b/drivers/media/usb/dvb-usb/opera1.c
index c8a9504..16ba90a 100644
--- a/drivers/media/usb/dvb-usb/opera1.c
+++ b/drivers/media/usb/dvb-usb/opera1.c
@@ -151,7 +151,7 @@
break;
}
if (dvb_usb_opera1_debug & 0x10)
- info("sending i2c mesage %d %d", tmp, msg[i].len);
+ info("sending i2c message %d %d", tmp, msg[i].len);
}
mutex_unlock(&d->i2c_mutex);
return num;
diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c
index 31a6212..b3e5098 100644
--- a/drivers/misc/mei/amthif.c
+++ b/drivers/misc/mei/amthif.c
@@ -60,7 +60,7 @@
}
/**
- * mei_amthif_host_init_ - mei initialization amthif client.
+ * mei_amthif_host_init - mei initialization amthif client.
*
* @dev: the device structure
*
@@ -433,7 +433,7 @@
/**
- * mei_amthif_irq_process_completed - processes completed iamthif operation.
+ * mei_amthif_irq_write_completed - processes completed iamthif operation.
*
* @dev: the device structure.
* @slots: free slots.
@@ -704,7 +704,7 @@
/**
* mei_amthif_release - the release function
*
-* @inode: pointer to inode structure
+* @dev: device structure
* @file: pointer to file structure
*
* returns 0 on success, <0 on error
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 7189274..e310ca6 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -109,7 +109,7 @@
* mei_io_cb_init - allocate and initialize io callback
*
* @cl - mei client
- * @file: pointer to file structure
+ * @fp: pointer to file structure
*
* returns mei_cl_cb pointer or NULL;
*/
@@ -132,8 +132,8 @@
/**
* mei_io_cb_alloc_req_buf - allocate request buffer
*
- * @cb - io callback structure
- * @size: size of the buffer
+ * @cb: io callback structure
+ * @length: size of the buffer
*
* returns 0 on success
* -EINVAL if cb is NULL
@@ -154,10 +154,10 @@
return 0;
}
/**
- * mei_io_cb_alloc_req_buf - allocate respose buffer
+ * mei_io_cb_alloc_resp_buf - allocate respose buffer
*
- * @cb - io callback structure
- * @size: size of the buffer
+ * @cb: io callback structure
+ * @length: size of the buffer
*
* returns 0 on success
* -EINVAL if cb is NULL
@@ -183,7 +183,6 @@
/**
* mei_cl_flush_queues - flushes queue lists belonging to cl.
*
- * @dev: the device structure
* @cl: host client
*/
int mei_cl_flush_queues(struct mei_cl *cl)
@@ -244,7 +243,8 @@
/**
* mei_cl_find_read_cb - find this cl's callback in the read list
*
- * @dev: device structure
+ * @cl: host client
+ *
* returns cb on success, NULL on error
*/
struct mei_cl_cb *mei_cl_find_read_cb(struct mei_cl *cl)
@@ -263,6 +263,7 @@
*
* @cl - host client
* @id - fixed host id or -1 for genereting one
+ *
* returns 0 on success
* -EINVAL on incorrect values
* -ENONET if client not found
@@ -302,7 +303,7 @@
/**
* mei_cl_unlink - remove me_cl from the list
*
- * @dev: the device structure
+ * @cl: host client
*/
int mei_cl_unlink(struct mei_cl *cl)
{
@@ -538,7 +539,6 @@
/**
* mei_cl_flow_ctrl_creds - checks flow_control credits for cl.
*
- * @dev: the device structure
* @cl: private data of the file object
*
* returns 1 if mei_flow_ctrl_creds >0, 0 - otherwise.
@@ -579,8 +579,8 @@
/**
* mei_cl_flow_ctrl_reduce - reduces flow_control.
*
- * @dev: the device structure
* @cl: private data of the file object
+ *
* @returns
* 0 on success
* -ENOENT when me client is not found
@@ -618,7 +618,7 @@
}
/**
- * mei_cl_start_read - the start read client message function.
+ * mei_cl_read_start - the start read client message function.
*
* @cl: host client
*
diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c
index db605f5..6916045 100644
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -62,6 +62,7 @@
/**
* mei_hbm_cl_hdr - construct client hbm header
+ *
* @cl: - client
* @hbm_cmd: host bus message command
* @buf: buffer for cl header
@@ -206,7 +207,7 @@
}
/**
- * mei_hbm_prop_requsest - request property for a single client
+ * mei_hbm_prop_req - request property for a single client
*
* @dev: the device structure
*
@@ -306,9 +307,9 @@
}
/**
- * add_single_flow_creds - adds single buffer credentials.
+ * mei_hbm_add_single_flow_creds - adds single buffer credentials.
*
- * @file: private data ot the file object.
+ * @dev: the device structure
* @flow: flow control.
*/
static void mei_hbm_add_single_flow_creds(struct mei_device *dev,
@@ -500,7 +501,7 @@
/**
- * mei_client_disconnect_request - disconnect request initiated by me
+ * mei_hbm_fw_disconnect_req - disconnect request initiated by me
* host sends disoconnect response
*
* @dev: the device structure.
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
index fc03227..822170f 100644
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -103,7 +103,7 @@
/**
- * me_hw_config - configure hw dependent settings
+ * mei_me_hw_config - configure hw dependent settings
*
* @dev: mei device
*/
@@ -169,7 +169,7 @@
* mei_me_hw_reset - resets fw via mei csr register.
*
* @dev: the device structure
- * @interrupts_enabled: if interrupt should be enabled after reset.
+ * @intr_enable: if interrupt should be enabled after reset.
*/
static void mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
{
@@ -285,7 +285,7 @@
}
/**
- * mei_hbuf_is_empty - checks if host buffer is empty.
+ * mei_me_hbuf_is_empty - checks if host buffer is empty.
*
* @dev: the device structure
*
@@ -554,7 +554,7 @@
};
/**
- * init_mei_device - allocates and initializes the mei device structure
+ * mei_me_dev_init - allocates and initializes the mei device structure
*
* @pdev: The pci device structure
*
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 1473cfd..2ad7369 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -230,7 +230,7 @@
/**
- * _mei_hb_read - processes read related operation.
+ * _mei_irq_thread_read - processes read related operation.
*
* @dev: the device structure.
* @slots: free slots.
@@ -369,7 +369,7 @@
}
/**
- * mei_irq_thread_read_handler - bottom half read routine after ISR to
+ * mei_irq_read_handler - bottom half read routine after ISR to
* handle the read processing.
*
* @dev: the device structure
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 88aec6a..a727464 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -92,6 +92,7 @@
/**
* mei_quirk_probe - probe for devices that doesn't valid ME interface
+ *
* @pdev: PCI device structure
* @ent: entry into pci_device_table
*
diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c
index eb3f05c..6251a4e 100644
--- a/drivers/misc/mei/wd.c
+++ b/drivers/misc/mei/wd.c
@@ -58,6 +58,7 @@
* mei_wd_host_init - connect to the watchdog client
*
* @dev: the device structure
+ *
* returns -ENENT if wd client cannot be found
* -EIO if write has failed
* 0 on success
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
index 21e261f..3ef7092 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
@@ -810,7 +810,7 @@
if (wufc & AT_WUFC_LNKC) {
wol_ctrl |= WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN;
if (atl1c_write_phy_reg(hw, MII_IER, IER_LINK_UP) != 0) {
- dev_dbg(&pdev->dev, "%s: write phy MII_IER faild.\n",
+ dev_dbg(&pdev->dev, "%s: write phy MII_IER failed.\n",
atl1c_driver_name);
}
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
index 91ecd6a..4b077a7 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
@@ -591,7 +591,7 @@
DCBX_READ_REMOTE_MIB);
if (rc) {
- BNX2X_ERR("Faild to read remote mib from FW\n");
+ BNX2X_ERR("Failed to read remote mib from FW\n");
return rc;
}
@@ -619,7 +619,7 @@
DCBX_READ_LOCAL_MIB);
if (rc) {
- BNX2X_ERR("Faild to read local mib from FW\n");
+ BNX2X_ERR("Failed to read local mib from FW\n");
return rc;
}
diff --git a/drivers/net/ethernet/sfc/Kconfig b/drivers/net/ethernet/sfc/Kconfig
index 435b4f1..4136ccc 100644
--- a/drivers/net/ethernet/sfc/Kconfig
+++ b/drivers/net/ethernet/sfc/Kconfig
@@ -24,7 +24,7 @@
bool "Solarflare SFC9000-family hwmon support"
depends on SFC && HWMON && !(SFC=y && HWMON=m)
default y
- ----help---
+ ---help---
This exposes the on-board firmware-managed sensors as a
hardware monitor device.
config SFC_SRIOV
diff --git a/drivers/net/ethernet/ti/cpts.c b/drivers/net/ethernet/ti/cpts.c
index 463597f..8c351f1 100644
--- a/drivers/net/ethernet/ti/cpts.c
+++ b/drivers/net/ethernet/ti/cpts.c
@@ -94,7 +94,7 @@
case CPTS_EV_HW:
break;
default:
- pr_err("cpts: unkown event type\n");
+ pr_err("cpts: unknown event type\n");
break;
}
if (type == match)
diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
index ed48d75..ee346d4 100644
--- a/drivers/power/pm2301_charger.c
+++ b/drivers/power/pm2301_charger.c
@@ -235,7 +235,7 @@
static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val)
{
- dev_dbg(pm2->dev , "20 minutes watchdog occured\n");
+ dev_dbg(pm2->dev , "20 minutes watchdog expired\n");
pm2->ac.wd_expired = true;
power_supply_changed(&pm2->ac_chg.psy);
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 8edb4ae..814af5a 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -59,7 +59,7 @@
{
if (type < ARRAY_SIZE(rproc_crash_names))
return rproc_crash_names[type];
- return "unkown";
+ return "unknown";
}
/*
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 79fbe38..0c81915 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -402,7 +402,7 @@
tristate "TI TPS6586X RTC driver"
depends on MFD_TPS6586X
help
- TI Power Managment IC TPS6586X supports RTC functionality
+ TI Power Management IC TPS6586X supports RTC functionality
along with alarm. This driver supports the RTC driver for
the TPS6586X RTC module.
@@ -420,7 +420,7 @@
tristate "TI TPS80031/TPS80032 RTC driver"
depends on MFD_TPS80031
help
- TI Power Managment IC TPS80031 supports RTC functionality
+ TI Power Management IC TPS80031 supports RTC functionality
along with alarm. This driver supports the RTC driver for
the TPS80031 RTC module.
diff --git a/drivers/rtc/rtc-max8997.c b/drivers/rtc/rtc-max8997.c
index 5693619..dacf48d 100644
--- a/drivers/rtc/rtc-max8997.c
+++ b/drivers/rtc/rtc-max8997.c
@@ -24,7 +24,7 @@
/* Module parameter for WTSR function control */
static int wtsr_en = 1;
module_param(wtsr_en, int, 0444);
-MODULE_PARM_DESC(wtsr_en, "Wachdog Timeout & Sofware Reset (default=on)");
+MODULE_PARM_DESC(wtsr_en, "Watchdog Timeout & Software Reset (default=on)");
/* Module parameter for SMPL function control */
static int smpl_en = 1;
module_param(smpl_en, int, 0444);
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 214d691..9014690 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -369,7 +369,7 @@
break;
default:
beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG,
- "BS_%d : Unkown Param Type : %d\n",
+ "BS_%d : Unknown Param Type : %d\n",
iface_param->param);
return -ENOSYS;
}
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index a6c2fe4..55cc990 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -1292,7 +1292,7 @@
break;
default:
return snprintf(buf, PAGE_SIZE,
- "Unkown Adapter Family: 0x%x\n", dev_id);
+ "Unknown Adapter Family: 0x%x\n", dev_id);
break;
}
}
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index b44d04e..f109e3b 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -580,8 +580,8 @@
* @sq_mem_size: SQ size
* @sq_prod_qe: SQ producer entry pointer
* @sq_cons_qe: SQ consumer entry pointer
- * @sq_first_qe: virtaul address of first entry in SQ
- * @sq_last_qe: virtaul address of last entry in SQ
+ * @sq_first_qe: virtual address of first entry in SQ
+ * @sq_last_qe: virtual address of last entry in SQ
* @sq_prod_idx: SQ producer index
* @sq_cons_idx: SQ consumer index
* @sqe_left: number sq entry left
@@ -593,8 +593,8 @@
* @cq_mem_size: CQ size
* @cq_prod_qe: CQ producer entry pointer
* @cq_cons_qe: CQ consumer entry pointer
- * @cq_first_qe: virtaul address of first entry in CQ
- * @cq_last_qe: virtaul address of last entry in CQ
+ * @cq_first_qe: virtual address of first entry in CQ
+ * @cq_last_qe: virtual address of last entry in CQ
* @cq_prod_idx: CQ producer index
* @cq_cons_idx: CQ consumer index
* @cqe_left: number cq entry left
@@ -608,8 +608,8 @@
* @rq_mem_size: RQ size
* @rq_prod_qe: RQ producer entry pointer
* @rq_cons_qe: RQ consumer entry pointer
- * @rq_first_qe: virtaul address of first entry in RQ
- * @rq_last_qe: virtaul address of last entry in RQ
+ * @rq_first_qe: virtual address of first entry in RQ
+ * @rq_last_qe: virtual address of last entry in RQ
* @rq_prod_idx: RQ producer index
* @rq_cons_idx: RQ consumer index
* @rqe_left: number rq entry left
diff --git a/drivers/scsi/csiostor/csio_mb.c b/drivers/scsi/csiostor/csio_mb.c
index 5b27c48..f5d9ee1 100644
--- a/drivers/scsi/csiostor/csio_mb.c
+++ b/drivers/scsi/csiostor/csio_mb.c
@@ -182,7 +182,7 @@
* @tmo: Command timeout.
* @pf: PF number.
* @vf: VF number.
- * @nparams: Number of paramters
+ * @nparams: Number of parameters
* @params: Parameter mnemonic array.
* @val: Parameter value array.
* @wr: Write/Read PARAMS.
@@ -721,7 +721,7 @@
* @mbp: Mailbox structure to initialize
* @priv: Private data
* @mb_tmo: Mailbox time-out period (in ms).
- * @eq_ofld_params: (Offload) Egress queue paramters.
+ * @eq_ofld_params: (Offload) Egress queue parameters.
* @cbfn: The call-back function
*
*
@@ -752,7 +752,7 @@
* @priv: Private data
* @mb_tmo: Mailbox time-out period (in ms).
* @cascaded_req: TRUE - if this request is cascased with Eq-alloc request.
- * @eq_ofld_params: (Offload) Egress queue paramters.
+ * @eq_ofld_params: (Offload) Egress queue parameters.
* @cbfn: The call-back function
*
*
@@ -817,7 +817,7 @@
* @mbp: Mailbox structure to initialize
* @priv: Private data.
* @mb_tmo: Mailbox time-out period (in ms).
- * @eq_ofld_params: (Offload) Egress queue paramters.
+ * @eq_ofld_params: (Offload) Egress queue parameters.
* @cbfn: The call-back function
*
*
@@ -840,7 +840,7 @@
* @hw: The HW structure.
* @mbp: Mailbox structure to initialize.
* @retval: Firmware return value.
- * @eq_ofld_params: (Offload) Egress queue paramters.
+ * @eq_ofld_params: (Offload) Egress queue parameters.
*
*/
void
@@ -870,7 +870,7 @@
* @mbp: Mailbox structure to initialize
* @priv: Private data area.
* @mb_tmo: Mailbox time-out period (in ms).
- * @eq_ofld_params: (Offload) Egress queue paramters, that is to be freed.
+ * @eq_ofld_params: (Offload) Egress queue parameters, that is to be freed.
* @cbfn: The call-back function
*
*
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 32d5683..f5d1064 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -4741,7 +4741,7 @@
if (job->request_len <
sizeof(struct fc_bsg_request) + sizeof(struct dfc_mbox_req)) {
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
- "2737 Mix-and-match backward compability "
+ "2737 Mix-and-match backward compatibility "
"between MBOX_REQ old size:%d and "
"new request size:%d\n",
(int)(job->request_len -
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index 1df9ed4..4db0c7a 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -148,7 +148,7 @@
desc = "raid_config";
break;
case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING:
- desc = "driver_mappping";
+ desc = "driver_mapping";
break;
}
break;
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index d8293f25c..aa66361 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -1049,7 +1049,7 @@
bio = bio_kmalloc(GFP_KERNEL, numentries);
if (unlikely(!bio)) {
- OSD_DEBUG("Faild to allocate BIO size=%u\n", numentries);
+ OSD_DEBUG("Failed to allocate BIO size=%u\n", numentries);
return ERR_PTR(-ENOMEM);
}
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 71d3d23..9299400 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -2089,7 +2089,7 @@
if (r_addr & 0xf) {
DEBUG2(ql4_printk(KERN_INFO, ha,
- "[%s]: Read addr 0x%x not 16 bytes alligned\n",
+ "[%s]: Read addr 0x%x not 16 bytes aligned\n",
__func__, r_addr));
return QLA_ERROR;
}
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index db46143..d36f34e 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -672,7 +672,7 @@
retval = -ENODEV; /* close called more than once */
mutex_unlock(&dev->mutex);
} else {
- dev->opened = 0; /* we're closeing now */
+ dev->opened = 0; /* we're closing now */
retval = 0;
if (dev->present) {
/*
@@ -802,7 +802,7 @@
/* this one will match for the IOWarrior56 only */
dev->int_out_endpoint = endpoint;
}
- /* we have to check the report_size often, so remember it in the endianess suitable for our machine */
+ /* we have to check the report_size often, so remember it in the endianness suitable for our machine */
dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
(dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56))
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 29cad9e..e129cf6 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -705,7 +705,7 @@
return -ENODEV;
}
i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2);
- dev_dbg(&intf->dev, "set inteface result %d\n", i);
+ dev_dbg(&intf->dev, "set interface result %d\n", i);
interface = intf->cur_altsetting;
diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index 77cb4ff..a6780ee 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -1181,7 +1181,7 @@
}
/*
- * FB_VMODE_SMOOTH_XPAN will be cleared, if one of the folloing
+ * FB_VMODE_SMOOTH_XPAN will be cleared, if one of the following
* checks failed and smooth scrolling is not possible
*/
diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index b1f19b2..8d2499d 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -1088,7 +1088,7 @@
goto err_defio;
}
- dev_dbg(info->device, "targetting %d frames per second\n", board->fps);
+ dev_dbg(info->device, "targeting %d frames per second\n", board->fps);
info->fbdefio->delay = HZ / board->fps;
info->fbdefio->first_io = auok190xfb_dpy_first_io,
info->fbdefio->deferred_io = auok190xfb_dpy_deferred_io,
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index de9d4da..12bbede 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -976,14 +976,14 @@
}
if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
- dev_err(dp->dev, "faild to get reg for dptx-phy\n");
+ dev_err(dp->dev, "failed to get reg for dptx-phy\n");
ret = -EINVAL;
goto err;
}
if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
&dp->enable_mask)) {
- dev_err(dp->dev, "faild to get enable-mask for dptx-phy\n");
+ dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
ret = -EINVAL;
goto err;
}
diff --git a/drivers/video/goldfishfb.c b/drivers/video/goldfishfb.c
index 489abb3..7f6c9e6 100644
--- a/drivers/video/goldfishfb.c
+++ b/drivers/video/goldfishfb.c
@@ -148,7 +148,7 @@
wait_event_timeout(fb->wait,
fb->base_update_count != base_update_count, HZ / 15);
if (fb->base_update_count == base_update_count)
- pr_err("goldfish_fb_pan_display: timeout wating for base update\n");
+ pr_err("goldfish_fb_pan_display: timeout waiting for base update\n");
return 0;
}
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index 76d9053..05c2dc3 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -862,7 +862,7 @@
printk(KERN_INFO PFX
"unknown chip production id %i, revision %i\n",
prod_id, revision);
- printk(KERN_INFO PFX "please contant maintainer\n");
+ printk(KERN_INFO PFX "please contact maintainer\n");
goto bail;
}
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c
index 395cb6a..9ef05d3 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/ssd1307fb.c
@@ -1,5 +1,5 @@
/*
- * Driver for the Solomon SSD1307 OLED controler
+ * Driver for the Solomon SSD1307 OLED controller
*
* Copyright 2012 Free Electrons
*
@@ -392,6 +392,6 @@
module_i2c_driver(ssd1307fb_driver);
-MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controler");
+MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controller");
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
MODULE_LICENSE("GPL");
diff --git a/fs/befs/btree.c b/fs/befs/btree.c
index a66c9b1..74e397d 100644
--- a/fs/befs/btree.c
+++ b/fs/befs/btree.c
@@ -436,8 +436,7 @@
goto error;
}
- if ((this_node = (befs_btree_node *)
- kmalloc(sizeof (befs_btree_node), GFP_NOFS)) == NULL) {
+ if ((this_node = kmalloc(sizeof (befs_btree_node), GFP_NOFS)) == NULL) {
befs_error(sb, "befs_btree_read() failed to allocate %u "
"bytes of memory", sizeof (befs_btree_node));
goto error;
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index cc2213a..201c8d3 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -137,7 +137,7 @@
rwlock_t ext_lock; /* rwlock for consistency */
unsigned int fofs; /* start offset in a file */
u32 blk_addr; /* start block address of the extent */
- unsigned int len; /* lenth of the extent */
+ unsigned int len; /* length of the extent */
};
/*
diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index 94b8a0c..2e3eb2d 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -222,7 +222,7 @@
}
/*
- * This function is called from two pathes.
+ * This function is called from two paths.
* One is garbage collection and the other is SSR segment selection.
* When it is called during GC, it just gets a victim segment
* and it does not remove it from dirty seglist.
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index fea6e58..62e0177 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -82,7 +82,7 @@
init_once((void *) fi);
- /* Initilize f2fs-specific inode info */
+ /* Initialize f2fs-specific inode info */
fi->vfs_inode.i_version = 1;
atomic_set(&fi->dirty_dents, 0);
fi->i_current_depth = 1;
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index cf35155..bd82235 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -1017,11 +1017,11 @@
return;
trap_recursive:
- print_symbol(KERN_ERR "original: %s\n", gh2->gh_ip);
+ printk(KERN_ERR "original: %pSR\n", (void *)gh2->gh_ip);
printk(KERN_ERR "pid: %d\n", pid_nr(gh2->gh_owner_pid));
printk(KERN_ERR "lock type: %d req lock state : %d\n",
gh2->gh_gl->gl_name.ln_type, gh2->gh_state);
- print_symbol(KERN_ERR "new: %s\n", gh->gh_ip);
+ printk(KERN_ERR "new: %pSR\n", (void *)gh->gh_ip);
printk(KERN_ERR "pid: %d\n", pid_nr(gh->gh_owner_pid));
printk(KERN_ERR "lock type: %d req lock state : %d\n",
gh->gh_gl->gl_name.ln_type, gh->gh_state);
diff --git a/fs/gfs2/trans.c b/fs/gfs2/trans.c
index 88162fa..5bc023e 100644
--- a/fs/gfs2/trans.c
+++ b/fs/gfs2/trans.c
@@ -96,7 +96,8 @@
static void gfs2_print_trans(const struct gfs2_trans *tr)
{
- print_symbol(KERN_WARNING "GFS2: Transaction created at: %s\n", tr->tr_ip);
+ printk(KERN_WARNING "GFS2: Transaction created at: %pSR\n",
+ (void *)tr->tr_ip);
printk(KERN_WARNING "GFS2: blocks=%u revokes=%u reserved=%u touched=%d\n",
tr->tr_blocks, tr->tr_revokes, tr->tr_reserved, tr->tr_touched);
printk(KERN_WARNING "GFS2: Buf %u/%u Databuf %u/%u Revoke %u/%u\n",
diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c
index 88f9611..5457745 100644
--- a/fs/nfs/objlayout/objio_osd.c
+++ b/fs/nfs/objlayout/objio_osd.c
@@ -234,7 +234,7 @@
lseg = kzalloc(lseg_size, gfp_flags);
if (unlikely(!lseg)) {
- dprintk("%s: Faild allocation numdevs=%d size=%zd\n", __func__,
+ dprintk("%s: Failed allocation numdevs=%d size=%zd\n", __func__,
numdevs, lseg_size);
return -ENOMEM;
}
diff --git a/fs/nfs/objlayout/objlayout.h b/fs/nfs/objlayout/objlayout.h
index 880ba08..87aa1de 100644
--- a/fs/nfs/objlayout/objlayout.h
+++ b/fs/nfs/objlayout/objlayout.h
@@ -114,7 +114,7 @@
gfp_t gfp_flags);
extern void objio_free_lseg(struct pnfs_layout_segment *lseg);
-/* objio_free_result will free these @oir structs recieved from
+/* objio_free_result will free these @oir structs received from
* objlayout_{read,write}_done
*/
extern void objio_free_result(struct objlayout_io_res *oir);
diff --git a/fs/ufs/util.c b/fs/ufs/util.c
index 95425b5..b6c2f94 100644
--- a/fs/ufs/util.c
+++ b/fs/ufs/util.c
@@ -26,8 +26,7 @@
count = size >> uspi->s_fshift;
if (count > UFS_MAXFRAG)
return NULL;
- ubh = (struct ufs_buffer_head *)
- kmalloc (sizeof (struct ufs_buffer_head), GFP_NOFS);
+ ubh = kmalloc (sizeof (struct ufs_buffer_head), GFP_NOFS);
if (!ubh)
return NULL;
ubh->fragment = fragment;
diff --git a/include/linux/evm.h b/include/linux/evm.h
index 9fc13a7..1fcb88c 100644
--- a/include/linux/evm.h
+++ b/include/linux/evm.h
@@ -96,5 +96,5 @@
return 0;
}
-#endif /* CONFIG_EVM_H */
+#endif /* CONFIG_EVM */
#endif /* LINUX_EVM_H */
diff --git a/include/linux/iio/gyro/itg3200.h b/include/linux/iio/gyro/itg3200.h
index c53f169..2a82085 100644
--- a/include/linux/iio/gyro/itg3200.h
+++ b/include/linux/iio/gyro/itg3200.h
@@ -149,6 +149,6 @@
{
}
-#endif /* CONFIG_IIO_RING_BUFFER */
+#endif /* CONFIG_IIO_BUFFER */
#endif /* ITG3200_H_ */
diff --git a/include/linux/ima.h b/include/linux/ima.h
index 86c361e..1b7f268 100644
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -46,7 +46,7 @@
return 0;
}
-#endif /* CONFIG_IMA_H */
+#endif /* CONFIG_IMA */
#ifdef CONFIG_IMA_APPRAISE
extern void ima_inode_post_setattr(struct dentry *dentry);
@@ -72,5 +72,5 @@
{
return 0;
}
-#endif /* CONFIG_IMA_APPRAISE_H */
+#endif /* CONFIG_IMA_APPRAISE */
#endif /* _LINUX_IMA_H */
diff --git a/include/linux/integrity.h b/include/linux/integrity.h
index 66c5fe9..83222ce 100644
--- a/include/linux/integrity.h
+++ b/include/linux/integrity.h
@@ -36,5 +36,5 @@
{
return;
}
-#endif /* CONFIG_INTEGRITY_H */
+#endif /* CONFIG_INTEGRITY */
#endif /* _LINUX_INTEGRITY_H */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index c74092e..5c76737 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -450,7 +450,7 @@
*
* present_pages is physical pages existing within the zone, which
* is calculated as:
- * present_pages = spanned_pages - absent_pages(pags in holes);
+ * present_pages = spanned_pages - absent_pages(pages in holes);
*
* managed_pages is present pages managed by the buddy system, which
* is calculated as (reserved_pages includes pages allocated by the
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index df85a0c..cd89510 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -576,7 +576,7 @@
#define WORD_ROUND(s) (((s)+3)&~3)
/* Make a new instance of type. */
-#define t_new(type, flags) (type *)kzalloc(sizeof(type), flags)
+#define t_new(type, flags) kzalloc(sizeof(type), flags)
/* Compare two timevals. */
#define tv_lt(s, t) \
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 45c1981..5ec42db 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -867,7 +867,7 @@
ssize_t snd_pcm_format_size(snd_pcm_format_t format, size_t samples);
const unsigned char *snd_pcm_format_silence_64(snd_pcm_format_t format);
int snd_pcm_format_set_silence(snd_pcm_format_t format, void *buf, unsigned int frames);
-snd_pcm_format_t snd_pcm_build_linear_format(int width, int unsignd, int big_endian);
+snd_pcm_format_t snd_pcm_build_linear_format(int width, int unsigned, int big_endian);
void snd_pcm_set_ops(struct snd_pcm * pcm, int direction, struct snd_pcm_ops *ops);
void snd_pcm_set_sync(struct snd_pcm_substream *substream);
diff --git a/include/trace/events/timer.h b/include/trace/events/timer.h
index 425bcfe..8d21947 100644
--- a/include/trace/events/timer.h
+++ b/include/trace/events/timer.h
@@ -123,7 +123,7 @@
/**
* hrtimer_init - called when the hrtimer is initialized
- * @timer: pointer to struct hrtimer
+ * @hrtimer: pointer to struct hrtimer
* @clockid: the hrtimers clock
* @mode: the hrtimers mode
*/
@@ -155,7 +155,7 @@
/**
* hrtimer_start - called when the hrtimer is started
- * @timer: pointer to struct hrtimer
+ * @hrtimer: pointer to struct hrtimer
*/
TRACE_EVENT(hrtimer_start,
@@ -186,8 +186,8 @@
);
/**
- * htimmer_expire_entry - called immediately before the hrtimer callback
- * @timer: pointer to struct hrtimer
+ * hrtimer_expire_entry - called immediately before the hrtimer callback
+ * @hrtimer: pointer to struct hrtimer
* @now: pointer to variable which contains current time of the
* timers base.
*
@@ -234,7 +234,7 @@
/**
* hrtimer_expire_exit - called immediately after the hrtimer callback returns
- * @timer: pointer to struct hrtimer
+ * @hrtimer: pointer to struct hrtimer
*
* When used in combination with the hrtimer_expire_entry tracepoint we can
* determine the runtime of the callback function.
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 9b9aeef..f8feeec 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1761,7 +1761,7 @@
* Unregister hstate attributes from a single node device.
* No-op if no hstate attributes attached.
*/
-void hugetlb_unregister_node(struct node *node)
+static void hugetlb_unregister_node(struct node *node)
{
struct hstate *h;
struct node_hstate *nhs = &node_hstates[node->dev.id];
@@ -1805,7 +1805,7 @@
* Register hstate attributes for a single node device.
* No-op if attributes already registered.
*/
-void hugetlb_register_node(struct node *node)
+static void hugetlb_register_node(struct node *node)
{
struct hstate *h;
struct node_hstate *nhs = &node_hstates[node->dev.id];
diff --git a/mm/memory.c b/mm/memory.c
index f7a1fba..6dc1882 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -715,11 +715,11 @@
* Choose text because data symbols depend on CONFIG_KALLSYMS_ALL=y
*/
if (vma->vm_ops)
- print_symbol(KERN_ALERT "vma->vm_ops->fault: %s\n",
- (unsigned long)vma->vm_ops->fault);
+ printk(KERN_ALERT "vma->vm_ops->fault: %pSR\n",
+ vma->vm_ops->fault);
if (vma->vm_file && vma->vm_file->f_op)
- print_symbol(KERN_ALERT "vma->vm_file->f_op->mmap: %s\n",
- (unsigned long)vma->vm_file->f_op->mmap);
+ printk(KERN_ALERT "vma->vm_file->f_op->mmap: %pSR\n",
+ vma->vm_file->f_op->mmap);
dump_stack();
add_taint(TAINT_BAD_PAGE, LOCKDEP_NOW_UNRELIABLE);
}
diff --git a/mm/slab.c b/mm/slab.c
index 856e4a1..96079244 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -2040,11 +2040,9 @@
}
if (cachep->flags & SLAB_STORE_USER) {
- printk(KERN_ERR "Last user: [<%p>]",
- *dbg_userword(cachep, objp));
- print_symbol("(%s)",
- (unsigned long)*dbg_userword(cachep, objp));
- printk("\n");
+ printk(KERN_ERR "Last user: [<%p>](%pSR)\n",
+ *dbg_userword(cachep, objp),
+ *dbg_userword(cachep, objp));
}
realobj = (char *)objp + obj_offset(cachep);
size = cachep->object_size;
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 1c2e46c..eaee00c 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1403,7 +1403,7 @@
/* Allocate and initialize the endpoint hash table. */
sctp_ep_hashsize = 64;
- sctp_ep_hashtable = (struct sctp_hashbucket *)
+ sctp_ep_hashtable =
kmalloc(64 * sizeof(struct sctp_hashbucket), GFP_KERNEL);
if (!sctp_ep_hashtable) {
pr_err("Failed endpoint_hash alloc\n");
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index 01f7f37..934dec9 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -1175,7 +1175,7 @@
snd_iprintf(buffer, "\tstreaming : %d\n", streaming);
snd_iprintf(buffer, "\tmailbox : %d\n", mailbox);
- snd_iprintf(buffer, "\tinterrups handling : %d\n\n", interr);
+ snd_iprintf(buffer, "\tinterrupts handling : %d\n\n", interr);
}
} /* endif elf loaded */
}
diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c
index b47c252..a2d01d1 100644
--- a/sound/soc/codecs/wm8974.c
+++ b/sound/soc/codecs/wm8974.c
@@ -125,7 +125,7 @@
SOC_ENUM("EQ4 Cut Off", wm8974_enum[10]),
SOC_SINGLE_TLV("EQ4 Volume", WM8974_EQ4, 0, 24, 1, eq_tlv),
-SOC_ENUM("Equaliser EQ5 Bandwith", wm8974_enum[11]),
+SOC_ENUM("Equaliser EQ5 Bandwidth", wm8974_enum[11]),
SOC_ENUM("EQ5 Cut Off", wm8974_enum[12]),
SOC_SINGLE_TLV("EQ5 Volume", WM8974_EQ5, 0, 24, 1, eq_tlv),
diff --git a/sound/soc/ux500/Kconfig b/sound/soc/ux500/Kconfig
index 069330d..6b799c0 100644
--- a/sound/soc/ux500/Kconfig
+++ b/sound/soc/ux500/Kconfig
@@ -20,8 +20,8 @@
help
Say Y if you want to enable the Ux500 platform-driver.
-+config SND_SOC_UX500_MACH_MOP500
-+ tristate "Machine - MOP500 (Ux500 + AB8500)"
+config SND_SOC_UX500_MACH_MOP500
+ tristate "Machine - MOP500 (Ux500 + AB8500)"
depends on AB8500_CORE && AB8500_GPADC && SND_SOC_UX500
select SND_SOC_AB8500_CODEC
select SND_SOC_UX500_PLAT_MSP_I2S
diff --git a/tools/perf/tests/attr.c b/tools/perf/tests/attr.c
index 038de3e..00218f5 100644
--- a/tools/perf/tests/attr.c
+++ b/tools/perf/tests/attr.c
@@ -178,6 +178,6 @@
!lstat(path_perf, &st))
return run_dir(path_dir, path_perf);
- fprintf(stderr, " (ommitted)");
+ fprintf(stderr, " (omitted)");
return 0;
}
diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c
index 88e2f44..0275bab 100644
--- a/tools/perf/tests/parse-events.c
+++ b/tools/perf/tests/parse-events.c
@@ -1321,7 +1321,7 @@
ret = stat(path, &st);
if (ret) {
- pr_debug("ommiting PMU cpu events tests\n");
+ pr_debug("omitting PMU cpu events tests\n");
return 0;
}
diff --git a/tools/power/cpupower/debug/i386/intel_gsic.c b/tools/power/cpupower/debug/i386/intel_gsic.c
index 53f5293..d032c82 100644
--- a/tools/power/cpupower/debug/i386/intel_gsic.c
+++ b/tools/power/cpupower/debug/i386/intel_gsic.c
@@ -66,7 +66,7 @@
printf("ecx = 0x%.8x\n", r.ecx);
printf("edx = 0x%.8x\n", r.edx);
printf("Note also that some BIOS do not support the initial "
- "GSIC call, but the newer\nspeeedstep-smi driver may "
+ "GSIC call, but the newer\nspeedstep-smi driver may "
"work.\nFor this, you need to pass some arguments to "
"the speedstep-smi driver:\n");
printf("\tsmi_cmd=0x?? smi_port=0x?? smi_sig=1\n");